I know its a good thing to have good quality earpiece speakers but the ones on redmi note 8 pro are bit too loud, that even person sitting quite far is able to hear what's been talking about on call conversation. Any fix around for this or any app to fix it ?
1. dial *#*#3646633#*#*
2. swipe to Hardware Testing > Audio > Volume >Voice
3. select NB - Receiver - GSM
4. set UL Gain to 100 (or lower)
5. press SET
6. press NB > select WB
7. repeat step 4 - 5 again, do the same for SWB
8. press Receiver > select Receiver_SV
9. do the same step 4 - 5
10. back back back back till quit to home screen
In my case I have a problem that sounds very low, and I have to be adjusting the cell and even pressing it in my ear to listen, is the same when I listen on WhatsApp, they are very low, could you help me please?
---------- Post added at 05:37 AM ---------- Previous post was at 05:27 AM ----------
Crescendo Xenomorph said:
1. dial *#*#3646633#*#*
2. swipe to Hardware Testing > Audio > Volume >Voice
3. select NB - Receiver - GSM
4. set UL Gain to 100 (or lower)
5. press SET
6. press NB > select WB
7. repeat step 4 - 5 again, do the same for SWB
8. press Receiver > select Receiver_SV
9. do the same step 4 - 5
10. back back back back till quit to home screen
Click to expand...
Click to collapse
Is in Connectivity-Audio
kbx360 said:
In my case I have a problem that sounds very low, and I have to be adjusting the cell and even pressing it in my ear to listen, is the same when I listen on WhatsApp, they are very low, could you help me please?
Click to expand...
Click to collapse
Follow same step except step 4.
On step 4, you increase the value little by little & test it after setting it till you satisfied with the results.
BEWARE: increasing it too much will damage your speaker!
Crescendo Xenomorph said:
Follow same step except step 4.
On step 4, you increase the value little by little & test it after setting it till you satisfied with the results.
BEWARE: increasing it too much will damage your speaker!
Click to expand...
Click to collapse
Thanks for answering, I did everything as you specified and I did not find any difference, I got to upload the UL GAin 200 without seeing a difference
Maybe you got the one with factory defect?
I can lower or increase mine.
As for Whatsapp I think it's on step 2 choose: VoIP category rather than Voice.
Maybe some experts here can help me in this?
Crescendo Xenomorph said:
1. dial *#*#3646633#*#*
2. swipe to Hardware Testing > Audio > Volume >Voice
3. select NB - Receiver - GSM
4. set UL Gain to 100 (or lower)
5. press SET
6. press NB > select WB
7. repeat step 4 - 5 again, do the same for SWB
8. press Receiver > select Receiver_SV
9. do the same step 4 - 5
10. back back back back till quit to home screen
Click to expand...
Click to collapse
I tried dialing the code on a Redmi Note 9 Pro and the text simply went away, didn't bring me to a screen to swipe to anything - Is there a similar fix for Redmi Note 9 Pro? (that the speaker is too loud)
Bro, this is MTK only... MediaTek.... Can't work with Snapdragon
Crescendo Xenomorph said:
1. dial *#*#3646633#*#*
2. swipe to Hardware Testing > Audio > Volume >Voice
3. select NB - Receiver - GSM
4. set UL Gain to 100 (or lower)
5. press SET
6. press NB > select WB
7. repeat step 4 - 5 again, do the same for SWB
8. press Receiver > select Receiver_SV
9. do the same step 4 - 5
10. back back back back till quit to home screen
Click to expand...
Click to collapse
Hi. Would I still need step 8 if I were INCREASING the volume for a Bluth Tooth Headset? What are the max "safe" values to increase the headset to as to not damage the headset? Thank you for your time. I look forward to your response.
Thank you for this post. I JUST posted a question regarding this like issue, but, I am trying to INCREASE a Blue Tooth headset volume rather than decrease a traditional handset speaker that would come stock on any cell phone. Here is an attachment of at least one screen I may need to modify.
Thanks again for your time.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Crescendo Xenomorph said:
Follow same step except step 4.
On step 4, you increase the value little by little & test it after setting it till you satisfied with the results.
BEWARE: increasing it too much will damage your speaker!
Click to expand...
Click to collapse
Thanks for this guide. I have been looking for it
Can you make a guide for setting correct values to Digital Gain? I have Tecno Camon 18P and at higher playback volumes I notice distortions
Crescendo Xenomorph said:
1. dial *#*#3646633#*#*
2. swipe to Hardware Testing > Audio > Volume >Voice
3. select NB - Receiver - GSM
4. set UL Gain to 100 (or lower)
5. press SET
6. press NB > select WB
7. repeat step 4 - 5 again, do the same for SWB
8. press Receiver > select Receiver_SV
9. do the same step 4 - 5
10. back back back back till quit to home screen
Click to expand...
Click to collapse
Related
I am using a BT handsfree in my car. I need a quick method to toggle BT on/off mith the minimum of clicks. Ideally, on the home screen.
Any solution is appreciated, also existing apps/tweaks whatsoever.
The option to keep BT all the time on is not acceptable, due to many reasons eg. battery consumtion.
Thanx
Search for vjvolubilis. It's here http://forum.xda-developers.com/showthread.php?t=255911
try ammars or panoshas action screens (search for them in this section of the blackstone apps)
work a treat - ammars action screen enables bluetooth with discoverability and panoshas just enables bluetooth
Hi!!
Try Launch Manager...its veeeery goood
you my use the previous tips or just get that http://forum.xda-developers.com/showthread.php?t=362115, simplest of possibilities....this cab add to your programs an icon which tapped make your bluetooth on and discoverable mode....tap it again and it will switch it of.
AEButton Plus will do what you're after. I have it set to a tripple press of the up volume button (double is WiFi toggle, single: Volume) but you can set it to anything, even a single press.
chaosdefinesorder said:
AEButton Plus will do what you're after. I have it set to a tripple press of the up volume button (double is WiFi toggle, single: Volume) but you can set it to anything, even a single press.
Click to expand...
Click to collapse
Thanx a bunch for everyone! But AEButton Plus simply ROCKS!!!!!
Here is a schema for Blackstone I have found and implemented:
Button mappings scheme:
* OK key (in fact, it is arrow left or home on our hd)(4075):
2: "Turn Bluetooth On/Off"
3: "AlReader"
* Volume Up (0075):
Change volume or...
1: Press Up arrow key
* Volume Down (0076):
Change volume or...
1: Press Down arrow key
* Green Phone button (0072):
1: Press Green Button
2: "Contacts"
3: "Calendar"
* Red Phone button (0073):
Hang Up current call or...
1: Press Red Button
2: Task Manager
3: Show Actions Menu
Taskman exceptions
- "Phone"
Action Menu Items
- Show Backlight Dialog
- Rotate Screen
- Show current date/time
- Switch BlueTooth Off/On
- Switch WiFi Off/On
- Trigger Online
- Switch Display Off/On
- Disable "power off if not used"...
- Soft-Reset your device
- Power-OFF your device
Restore Volume Slider:
- During phone calls
- if Today is active
Screen Orientations:
- 0° (Normal)
- 270°
Timeouts:
- Task Manager Close in 3s.
- Actions Menu Close in 5s.
- Date/Time Close in 4s.
Backlight Settings
- Darkest level: 1
- Brightest level: 11
- Backlight step: 1
Keypress timeout: 400ms
Charge Sensor: Standard charge sensor
Power Off Level: 0%
Other settings
- Drop On Red Key
- Show notifications
- Large Task Manager
Thanks to all of you!
how to install the bluetooth toggle
Can someone tell me how to install it, there are 2 files in the zip,
how can I mke this toggle work
zvi1 said:
Can someone tell me how to install it, there are 2 files in the zip,
how can I mke this toggle work
Click to expand...
Click to collapse
It's not actually only the toggle, it's a whole software to programmatically change buttons behavior.
Don't know what you mean with two files, all you need is a .cab file. Simply comy it somewhere to device (e.g. onto mictoSD per USB cable) and then start it in Windows Explorer.
During install you will get the settings window, where you can perform settings as I suggested above.
Bluetooth Toggle Discoverable
I asked about "Bluetooth Toggle Discoverable" in the the followind shortcut:
http://forum.xda-developers.com/showthread.php?t=362115
it includes 2 file and i donot understand how to use it.
use this!
unzip this file, and copy CicleBT.exe to your hd, map a button to it. when you run it, this program will turn on (or turn off) bluetooth.
sorry, my english is very poor
CicleBT.exe
Tankyou, it is doing what I need,
i have TOUCH HD but when I want to attached it to butten,
i donot see it in program list, what sould i do?
zvi1 said:
Tankyou, it is doing what I need,
i have TOUCH HD but when I want to attached it to butten,
i donot see it in program list, what sould i do?
Click to expand...
Click to collapse
use file explorer make a shortcut for CicleBT.exe, place the shortcut to \windows\start menu\program(i use chinese rom, not sure of it), then u can see it in program list
zvi1 said:
I asked about "Bluetooth Toggle Discoverable" in the the followind shortcut:
http://forum.xda-developers.com/showthread.php?t=362115
it includes 2 file and i donot understand how to use it.
Click to expand...
Click to collapse
put the two files into a folder on your phone. mine are in a folder in program files on my storage card. then open up two windows on your pc. the first window with the the files in on your phone and in the second got to windows/start menu/programs on your phone. then just drag and drop with the right click of your mouse the bluetooth file. when the menu appears choose create shortcut here. exit all windows and go to your phone. you will now find the shortcut in your programs. hope this helps
Marcdu81 said:
Hello,new files with new icons .
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Click to expand...
Click to collapse
Available here .
bluegold said:
use this!
unzip this file, and copy CicleBT.exe to your hd, map a button to it. when you run it, this program will turn on (or turn off) bluetooth.
sorry, my english is very poor
Click to expand...
Click to collapse
Just what I was after so CABbed it for install/uninstall including shortcut. Can then map it to a button in Settings -- Personal -- Button -- Button 1 (hold)
Hi,
I have created a simple app for changing master volume. This app would be helpful for those who do not wish to use physical keys. This app works in dev unlocked device and greater.
Finally, thanks to Fiinix for the dllImport project.
Update 1:
========
Added Screen brightness slider also. Not sure if it is really needed by users.
Though the values are updated to registry, there is not much difference in brightness while sliding.
Thanks to Heathcliff for WP7RootTools sdk.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Works on Focus
Installed on my Focus and works well with one exception. Always shows 17 as the level if last set to 0 or mute. If set to any other number, that number will be properly displayed when closing and reopening this app.
HTC Titan dev unlock ok Thank a lot!
Thanks for the finding.. I removed the default value 17..
Plz use the attached XAP.
Great
Purushoth said:
Thanks for the finding.. I removed the default value 17..
Plz use the attached XAP.
Click to expand...
Click to collapse
That did it, works fine. Was waiting for something like this.
At a guess, this shouldn't even require interop-unlock, much less full-unlock or root-unlock. Is that correct? I know you can change the volume level using DllImportProject on just dev-unlock only.
Few improvements imho:
*mute button should unmute if phone allready muted
*max level button
*arround 3 custom buttons (that you can previously set the vol level to w/e you want)
*a metro icon
cheers
In my not full-unlock rom of my HTC Mozart work well. Thanks.
Sent from my HTC 7 Mozart using XDA Windows Phone 7 App
fredsky2 said:
Few improvements imho:
*mute button should unmute if phone allready muted
*max level button
*arround 3 custom buttons (that you can previously set the vol level to w/e you want)
*a metro icon
cheers
Click to expand...
Click to collapse
@GoodDayToDie,
Yes, all dev unlocked devices will be supported. It doesn't need full unlock.
@fredsky2,
Will update with a metro icon and preset button. Max vol could be configured in preset itself.
The api does not have support for mute. I could only reduce the volume to 0. Even if I store the value locally, it will not be useful if physical keys are also used in parallel.
a most excellent idea, thanks. will provide feedback once i actually try it out.
definitely a nice application.
and i do agree with the suggestions by @fredsky2, plus a 'return to default 15 volume' button.
i don't see the use of Custom Buttons beyond a Max, Default & Mute button.
i also suggest removing the Splash Screen, application should load more swiftly.
if you want to do a Mute/Unmute button, you might...
when Mute button is pressed:
01. catch & save the current volumeValue
02. change volumeValue to 0
03. change button Title to Unmute or hide buttonMute to reveal buttonUnmute
when [Un]mute Button is pressed:
01. grab savedVolumeValue
02. change volumeValue to savedVolumeValue
03. change Button Title to Mute or hide buttonUnmute to reveal buttonMute
Purushoth said:
Thanks for the finding.. I removed the default value 17..
Plz use the attached XAP.
Click to expand...
Click to collapse
i suggest you add that attachment to the original post; almost missed it.
Oh My God! Thanks OP for coming out with this. Your timing couldn't be any better....
I just posted a dismantling guide for the Titan in the Titan fora and I accidentally broke the data strip that connects the volume hard keys to the device. Much to my surprise (or lack thereof), there is no way to change volume without these keys (or with a headset that allows you to do this). Your app is literally the answer to my prayers
Thanks again!
@sh4d0w86,
Improved loading speed of app by removing unwanted dll's. It should be now faster.
Works on my Windows Phone Samsung Focus, Chevron Unlocked, Mango . Here are my suggestion.
1. Live Tile to Mute, Bring Volume to a Defined Level.
2. Colour of the bar can change from green to yellow to red depending if volume is low, medium and high.
- Live Tile can also follow the color codes
3. Support for Vibrate Mode and Live tile for it.
4. Fancy Stuff :
- Let user tilt the phone to change volume.
- Support with Talk Me to set volume to a desired level.
And Like sh4d0w86 said, sync when volume is changed with hardware button.
---------- Post added at 12:50 PM ---------- Previous post was at 12:32 PM ----------
If possible bring in the profiles where I can have combination of Volume Level, Vibration etc to change it at a certain time or when I need it.
@Purushoth
Very useful app, works very well on my Omnia 7 with custom rom.
Big thanks.
@sh4d0w86,
Added custom buttons as you guys wished.
I tried to change icon. But I am very poor in design. Please feel free to change the icon and post.
could you re-upload Power Slider?
i have downloaded three times and each time the file is corrupt.
sh4d0w86 said:
could you re-upload Power Slider?
i have downloaded three times and each time the file is corrupt.
Click to expand...
Click to collapse
Sorry, somehow it got partially uploaded.
Uploaded it again. Pls try now.
Cool application! one thing though,
I'm having an exception in the brightness area... I have HD7 with Custom ROM (Fully Unlocked)
Not working correctly on my HTC 7 Pro (fully unlocked)
Volume control working fine.
Brightness changes nothing..
Apps showing me : "Error occured: The System cannot find the file specified"
SAME Thing as by Lidanh !
Tasker is an app through which we can customize/automate our phone like we never had
Tasker is an simple app which uses phone's resources to automate your phone
It enables user to sit back n relax while it will do rest of the work without your knowing
Just set it up once n you are good to go
So what do you need
1. Tasker app : For rich ones: https://play.google.com/store/apps/details?id=net.dinglisch.android.taskerm
For not so rich ones : get it on your own!
And it does not end here
I'll be providing you various profiles n steps to set them up
So here we go:;;;
13/09/2014
Automate wifi at home
Steps
1. Open tasker n click on + icon on bottom right
2. Select "state"
3. Select phone
4. Select cell near
5. Hit scan n let it run for atleast 5min (run all over your house like mad men[emoji12] [emoji12]? )
6. Tick ok n then select net from the new menu
7. Select wifi n set it to on
8. Press back n you are good to go
9. Tap on right hand side of profile n select add exit task
10. Click on net , select wifi n set ti to off
Exit
What we have done here is that we have created a profile in which whenever our phone catches signal from the cell tower near our house it turns wifi on n when it stops getting those the wifi is turned off
14/09/2014
Night mode : batt saving at night
Steps
1. open tasker n click on plus icon
2. Select the time when you are usually in the bed
3. Now click on + n select net in it
4. Turn wifi off n do same for 3g or 2g
5. Now click again on + n in display make display brightness 0
6. Now again click on + , go to sounds n turn silent mode on
If you dont have problem in putting your phone to flight mode then this is for you
7. Go to phone n turn flight mode on
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[/IMG]
10/09/2014
Screen never time out on youtube
You know what is pain in the ass? When you leave youtube for buffering full video n see that the screen is off n you would have to start all over again
Not from now?
Steps to set it up
1. Add new profile by clicking on +
2. Select apps in it n let it load
3. Select youtube n press back button
4. Add new task n go to display in it
5. Select display timeout n set it to 24hrs(i am assuming that no one will use youtube for 24hrs??)
6. Hit back
7. Now click n press on the task n select add exit task
8. Go to display n again select display time out
9. Set it to 15sec
Thats it ?
[/IMG]
20/09/2014
Boost mode
Ever faced lags in games n wanna overclock your processor but can't do it as it consumes batt n you forget to put it back?
Well automate it then
Steps
1. Go to tasker and add new profile
2. Select apps n select the app in which you want the processor to overclock!
3. Now create new task and select system
4. In system select cpu and overclock to the value you feel ok with
5. Exit and add exit task by pressing on previous task
6. Go to cpu again and set it to normal values
[/IMG]
22/09/2014
Say the name
Well you might feel lazy sometimes , so lazy that you dont want to pick up your phone while messages are there bt there is a part of your mind saying that the message could be impt
So what to do now?
Simple set up a tasker profile which would say the name or the content of the text
Steps,
1. Add new profile by clicking on +
2. Go to task n tap on text received
3. Hit back and add new task
4. Now go to task and click on wait
5. Set wait to 3sec (just in case if your ringtone is long)
6. Now add new task and click on alert
7. Hit say and type "text from"
8. On the top there is tag button tap on it and select text from name or content
9. Hit back
10. Now tap and hold on profile
11. Add new one and set display off
[/IMG]
07/10/2014
Ever felt that when you put your phone down how many nitification you miss while your phone is still on silent?
There could be some impt messages or anything
This prob can be solved by simply adding a profile
Steps
1. Create a new profile
2. Select state and go to display
3. Set display to off and hit back
4. Now add a task and go to sounds
5. Set silent mode to off
6. Hit back and press on the task created in step 5
7. Add an exit task and in it set silent mode on
Thats it -)
Like it
Subscribe n comment
Peace out
I'll be adding new profiles in few days
You should not share Paid apps on XDA. It's XDA's rule. Immediately remove the Dropbox link otherwise moderators will ban you.
Done
New profile added-: never screen off on youtube
Sent from my GT-I9082 using Tapatalk
Tasker + Utter Combo makes ur phone more sophisticated.. I have more profiles. Talking SMS. Talking Alarm with news headline
Sent from my GT-I9082 using XDA Premium 4 mobile app
vasanthmes said:
Tasker + Utter Combo makes ur phone more sophisticated.. I have more profiles. Talking SMS. Talking Alarm with news headline
Sent from my GT-I9082 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Bro then comment those
It'll be good for us
N every one would know about new profiles
Sent from my GT-I9082 using Tapatalk
New profile added : boost mode for your heavy games
Sent from my GT-I9082 using Tapatalk
New profile added : say name of the sender 20/09/2014
Sent from my GT-I9082 using Tapatalk
Can someone add a profile or task for limitting battery charge on 80%?
I'd apriciate that. Thnx.
milot.tahiraj said:
Can someone add a profile or task for limitting battery charge on 80%?
I'd apriciate that. Thnx.
Click to expand...
Click to collapse
Bro that would be tough as you cant control your phone like that
But you can do 2 things
1. Set to launch various task like apps which downloads something( utorrent) or uses lots of ram so that batt would charge at a slower rate
2. Set up a notifying sound or anything you like
Sent from my GT-I9082 using Tapatalk
New profile added : sound back to normal when display is off
Sent from my GT-I9082 using Tapatalk
Profile to turn on sync when wifi is connected and exit task to turn off sync n wifi..
Profile to say the number or name of missed call..
1. Double tap home button to launch the camera in under one second.
1B. Disable the double-tap quick launch in the camera options to get rid of the delay when pressing the home button. It's a neat feature, but makes the home button much more quicker. (Thanks to @B1aze)
2. Use themes to change the look of your phone (limited as of right now; will be more widely available in the coming weeks to developers/themers).
3. Go into your App drawer and long press an icon as if you want to move/delete it. The small circles with the red '-' sign will let you either delete an app (if third-party) or disable it (if built-in).
4. Hold the power key for more than 7 seconds and the device will reboot. Hold VolUp+Home+Power to boot into recovery. Hold VolDown+Home+Power to boot into Download Mode.
5. Whenever you want to take a "selfie", you can simply frame the image first, and then put your finger on the heart rate sensor under the LED light at the back in order to take one.
6. When downloading a large file (30+ MB) and you have LTE AND are near WiFi, activate Download Booster! Settings--->More Connection Settings--->Download Booster. It combines both your WiFi and LTE connections into one for amazing DL speeds. Stupid Sprint took this out :/
7. Notification reminders! Settings--->Accessibility--->Notification reminders.
8. Don't forget to claim your free 100 GB cloud storage with OneDrive!
9. Private mode... You can hide content from prying eyes, including photos, videos, music, web history, and such. To activate it, go to Settings--->Privacy and safety--->Private mode.
10. Do Not Disturb mode. Dare I say... Better than Google's implementation of "priority notification only" mode. You can set a schedule for it, who IS/ISN'T allowed to contact you while it's on, etc.
11. Screen Pinning. Go to Lock Screen and Security--->Other Security Settings--->Pin Windows.
12. Customize your screen grid (4x4, 4x5 or 5x5) by pinching in when on the home screen.
13. Developer Options.. To enable this, go to Settings--->About Device--->Tap "Build Number" 10 times and you will unlock Developer Options!
14. Make your device a bit faster by going to Developer Options and setting window animation scale, transition animation scale & animator duration scale all to 0.5.
15. When you are in an app (Chrome, Gallery .... whatever) and you drag your finger from the upper right corner to somewhere in the middle of the screen the app shrinks which makes it more usable with one hand. (Thanks to @derWolf_)
16. You can have changing lockscreen wallpapers by changing it in the settings and selecting multiple wallpapers in the selection box. (Thanks to @altimax98)
17. For those having issues with Snapchat videos, go into Developer settings (see #13) and uncheck Nuplayer.
18. For better results with the fingerprint scanner, register your thumb multiple times for it to be more accurate.
19. Screenshot by holding power+home at the same time or using palm swipe to capture (turn on in settings).
20. Direction lock... Settings-->Accessibility. New way of unlocking your phone.
21. Under voice wake you can use Svoice to set a custom phrase to wake up the phone directly to listening for a command. (Thanks to @benjmiester)
22. If you rest any registered fingers over the scanner, it'll light up which registry it is. Helpful is you need to redo the fingerprint. (Thanks to @hayabusa1300cc; post #13 for screenshot).
23. Really debloat your GS6 (no root needed!)
24. Cell standby drain? Go into recovery mode and wipe your cache, power off phone completely then reboot.
25. Go to the dialer, and press the green dial button. It will load the last dialed number. (Thanks to @Jrhoop)
26. Disable the capacitive lights with no root required! (A LOT OF THANKS to @Averix)
26A. How to disable capacitive button lights. (ADB)
27. The volume down button can be used to take pictures when the camera app is running. (Thanks @segag)
28. Use volume keys in default messaging app to increase/decrease font size. (Thanks @jambo89liam)
29. If you want to enable grayscale without going into super power saving mode, go to settings -> personal -> accessibility -> direct access and turn both direct access on and grayscale. Once you do this, a triple tap of the home button will toggle grayscale on and off. (Thanks @shappy0869)
Will be adding as time goes on, feel free to add your own and I will add it to the OP!
Anyone have their Sprint S6?! Share some of your own tips and tricks if you do
Screenshot = power + home
Sent from my SM-G920P using XDA Free mobile app
My galaxy s6 doesnt have the download booster option. I guess sprint removed it.
Sent from my SM-G920P using XDA Free mobile app
syphen6 said:
My galaxy s6 doesnt have the download booster option. I guess sprint removed it.
Sent from my SM-G920P using XDA Free mobile app
Click to expand...
Click to collapse
yep, i'm with Sprint. i don't have this option either
Goddamn carriers f***ing around with our stuff
Screenshots with out buttons
turn on gesture screenshots in settings/motions and gestures.
Then swipe your whole hand right to left on the screen.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
i haven't been about to find out how to turn off the capacitive button lights
anyone else have any luck finding this option?
gtuansdiamm said:
i haven't been about to find out how to turn off the capacitive button lights
anyone else have any luck finding this option?
Click to expand...
Click to collapse
I read somewhere that the phone doesnt have that option unless you go into power saving mode or somerthing like that. This was one of the first things i tried doing at store but couldnt.
Why Samsung removed this option I have no clue, but it was a stupid one.
Keep clicking on the Android version in About Device menu > brings up Lollipop > click on lollipop to change colors a lot of times
while on that screen clicking > click and hold the lollipop > loads an Android "Flappy Bird" game.
rhambling said:
Keep clicking on the Android version in About Device menu > brings up Lollipop > click on lollipop to change colors a lot of times
while on that screen clicking > click and hold the lollipop > loads an Android "Flappy Bird" game.
Click to expand...
Click to collapse
That's every phone on Lollipop!
Has anyone figured out to disable extra sensitivity on the phone? I read its enabled by default but there's no way to disable it.
Ok I've figured out something with the fingerprint scanner. If you didn't rename the registered fingers then you may forget which finger is assigned like i did.
Well if you rest any registered fingers over the scanner, it'll light up which registry it is. Helpful is you need to redo the fingerprint.
Sent from my SM-G920P
hayabusa1300cc said:
Ok I've figured out something with the fingerprint scanner. If you didn't rename the registered fingers then you may forget which finger is assigned like i did.
Well if you rest any registered fingers over the scanner, it'll light up which registry it is. Helpful is you need to redo the fingerprint.
View attachment 3259354
Sent from my SM-G920P
Click to expand...
Click to collapse
Added!
Not really an S6 trick/tip. But I just figured out that if you tap the build number in google play store, it'll force update to latest version.
Sent from my SM-G920P
hayabusa1300cc said:
Not really an S6 trick/tip. But I just figured out that if you tap the build number in google play store, it'll force update to latest version.
View attachment 3263223
Sent from my SM-G920P
Click to expand...
Click to collapse
That was implemented months ago my friend.
Launch Google Now by holding the home button
Here are two tips that I don't think have been mentioned.
First, battery life will be greatly increased if you enable wi-fi calling under Connections. Once enabled (and activated on your Sprint account, for free), your cellular radio will essentially be turned off and all calls will go over wifi. I have noticed this really helps extend battery life.
Second, if you want to enable grayscale without going into super power saving mode, go to settings -> personal -> accessibility -> direct access and turn both direct access on and grayscale. Once you do this, a triple tap of the home button will toggle grayscale on and off.
Almost at 30, keep em' coming
If you long press on a notification it will change a darker color then click on the white exclamation box and it will take you straight the notification settings for that app. Much easier than going the long way around.
********************************************************************************************************************************************
* Battery Tuning Guide along with Battery Management for YU Yureka.
* Apart from step 8 in Battery Management section. All the contents in this file is composed by me (Vinayaka S P). Step 8 in Battery Management section credits goes to the person who found it ( sorry I don’t know his name as I have seen it many times in different forums by different people and in different websites.).
* All tuning, tricks and tips mentioned in this guide are safe, however I’m not responsible for any kind of damages or malfunction caused by following this guide.
* The main article of this guide is in YU forum forums .yuplaygod. com/threads/guide-battery-tuning-and-management-of-yureka.11246/
* Hit Thanks if this helped You
********************************************************************************************************************************************
Hi guys, I’m getting battery backup of nearly 24hrs everyday on my Yureka running on CM11.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Was that something magic spell or super natural power I did on my phone to get such awesome backup? The answer is NO it’s just a tuning which all should follow in the beginning to get such battery backup. So let me explain 1 by 1, and before that I’m not sure if battery tuning works for people who already using phone for more than a week, so battery tuning is for those who got phone just a few days back and not more than a week can do the battery tuning. But some custom settings I’ve explained after battery tuning, which can be applied to all user irrespective of when they bought Yureka. Well the people who are using Yureka for more than a week, you also give it a try.
Battery Tuning:
1. You received your phone, you start unboxing, but before you switch on the phone, just check out user manual for initial charging instructions. For Yureka its 3 hrs. So switch on the phone (without SIM and memory card) check the battery, if battery is below 50% then switch it off and put on charging for continuous 3hrs. Don’t plug out if it reaches 100% in just 2 hrs. Continue charging for 3hrs.
2. After 3+ hrs. Unplug charger, insert SIM and memory card and go on its all yours. Use the phone till it dies of 0% battery. Don’t worry about the backup its giving now. It may give 7 to 12 hrs. backup.
3. When it battery run out of juice and Yureka get switched off, keep it on charging until it reaches 100% don’t switch on the phone in between let it reach 100%.
4. After reaching 100% charge it more for another 10min and unplug charger > switch on the phone > use the phone.
5. Repeat step 3 and 4 for another 2 times, yeah it takes nearly 3-4 days to complete from step 1 to the step 5.
6. After completing step 5 you have a tuned battery. Now you have to take care of that. How to take care? here are some small tips :
a. Always keep your phone for charging only when it reaches below 5% (2% is recommended )
b. Never use phone during charging (No camera, No browsing, No Facebook, No games and etc. etc… However in emergency cases usage of internet and calling can be done for 5min.
c. Advised to keep phone in airplane mode for faster charging.
7. It might be difficult to follow Step 6a, as one cannot follow this while travelling. So why don’t you think of a Power Bank?
Using all these not only improves battery backup also keeps your battery healthy.
That’s all about battery tuning. Now let’s look into custom settings for enhanced battery backup:
Battery Management:
1. Keep display brightness to low always when you’re not in direct sunlight. And never keep in Auto Brightness mode unless it is required with higher priority.
2. Turn off the double tap to wakeup feature if you consider battery backup is more important than saving time by not pressing the power button.
3. Turn off the Location when not in use. Just go to settings > scroll down to Personal section and turn it off.
4. Turn off Auto Rotation.
5. Keep dark coloured wallpaper ( I’ve kept NO WALLPAPER ).
6. Turn off vibrations of notifications when it’s not necessary.
7. Turn off Navigation Buttons backlight as its not required always ( once phone become handy, you never need backlight again )
8. Go to settings > Personal section > Privacy > Privacy Guide > tap on option button / 3 dots in the top right corner > select Advanced > Under Location tab , Tap on Google Play Services > scroll down until you see “Wake up “ tap next to it and change option to Denied from Allowed > scroll down until you see “Keep awake “ tap next to it and change option to Denied from Allowed > and in the last row change the same to Denied for “Auto start”.
9. Do the step 6 procedure with Facebook app if you use, but for “Wake up” change it to Always Ask instead changing it to Denied.
10. Disable unnecessary apps like Google Maps, Google Play Books, Google Play Games, Google Play Newsstand, Hangouts, G+ etc… according to your use and needs.
11. Daily once clear data of Google Play Services, go to settings > apps > all apps > google play services > tap on “Manage Space“ > Tap on CLEAR ALL DATA > give OK to the confirmation pop ups.
12. Do the step 9 with Facebook app if you are installed it. (I recommend not to use face book app as it uses lot of battery and memory. But Facebook messenger is quite ok compared with Facebook app.)
That’s all about the customization for battery backup. I’ll update this if I found new tricks and fix to get much more battery backup.
Nyc post for battery management...will help a lot people compalining about battery ?
definitely my Battery time is increased a lot. it is difficult to obtain all the steps like not to use Facebook but it definitely increase the battery life as we know Facebook consumes a lot of juce. thanks @vinsys
Triggered from my Nexus 10
amitroutray said:
definitely my Battery time is increased a lot. it is difficult to obtain all the steps like not to use Facebook but it definitely increase the battery life as we know Facebook consumes a lot of juce. thanks @vinsys
Triggered from my Nexus 10
Click to expand...
Click to collapse
enjoy buddy :good: