Code:
* I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or any other messes you get yourself into.
* I'm not your babysitter, your flash-guide nanny or your "do it for me" daddy. The usual copy-paste disclaimer applies:
* Please do some research if you have any concerns about features included in the products you find here before flashing it!
* YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
* Your warranty will be void if you tamper with any part of your device / software.
* Same statement for XDA.
WELCOME TO QWERTY KERNEL PROJECT
Qwerty Kernel , Aiming Better Battery Life and Better Gaming Experience .
So what you can expect when you use this kernel ?
- Better Battery Life up to 8hrs+ ( depend on your usage )
- Very Stable to use even on GSI !
Changelog ;
- SmartMax cpu governor
- Yankactive cpu governor
- Ondemand_x cpu governor
- Alucard cpu governor
- blu_active cpu governor
- cyan cpu governor
- darkness cpu governor
- Re Oc Cpu to 2.2MHz
- Re Oc gpu to 750MHz
- updated display
- Fifops i/o
- Fifo i/o
- Sio i/o
- Sio plus i/o
- TripnDroid i/o
- Vr i/o
- Zen i/o
- Fast Charging
- missing header patch from revzz kernel
- adreno plus gpu governor
- adreno balanced gpu governor
- adreno guardian gpu governor
- gcam focus fix
- support for dts eagle audio
- Fp boost
- Added and switched thermal_engine to IntelliThermal v1.3
- removed unused some sync thing that eating battery , patched from mido Franco kernel
- improved interactive cpu gov, patch from mido Franco kernel
- update some display patch from mido Franco kernel
- some patches from mido franco and mido wolf kernel ( about performance )
- added adreno idler
- Fix for cpu idle (v12)
- Improvement of Deepsleep (v13)
- Remove improvement of Deepsleep cause random reboot (V14)
- Compiled using GCC 8.2 (V14)
- Force Fast Charging (V15)*
- Some changes on kernel performance (V15)*
- Removed "dirty" in kernel name (V15)*
- Change back to gcc 4.9 as it stable ( Final )
- updated interactive cpu gov ( Final )
Download :
Old Version :
Older (V9) : http://gestyy.com/w7SuDE
V12 OC > Click Here
V12 NOC > Click Here
V13 OC : https://drive.google.com/open?id=1PViAn2HotGrR99RtqSxPhmhpSRsKrj_E
V13 NOC : https://drive.google.com/file/d/1xRGoB4kuRhcqKOA0qywlrvwknVp3bSd6/view
V14 OC - https://drive.google.com/open?id=1YRU9jN_ls35aYXZV9LyxzFSllBQ1DHl1
V14 NOC - https://drive.google.com/open?id=1cYdqzWcA_XIlTu54QokV0jtedUM_uBEt
V15 OC - https://drive.google.com/open?id=1-1CZ4PpFrT46TuZtf-HGanKX5x5hj7JE
V15 NOC - https://drive.google.com/open?id=1-5Q2BKWVDjd8r1ysGr12KGb5DzT0Z_oL
*Newest !
OC Final : https://drive.google.com/open?id=13FDR2Hllt0en3VjQiyHKoDS8PHWAbESg
NOC FInal : https://drive.google.com/open?id=134EkSzhFkZHK_-FCIqXPdlnv9J9Clg7Z
See latest reply as download link no longer works . 2 years brah .
My Kernel sources : https://github.com/Qwertyysl/kernel_xiaomi_msm8953-ysl
Thanks to Mahajan , Rama , Vaisakh , darkhzykh , Reynold , Lostark , GiovanniRN5 , Del , (i dont want to tag cos i dont want to disturb them ) , all of the YSL Kernel Development Team , YSL Beta team and YSL Community
Special Thanks :
emabertax
franciscofranco
Sultan Alsawaf
and more ( if you feel up sad about credits , pm me )
More :
What is OC ?
Overclocking has always been about increasing performance . Read More : https://www.tomsguide.com/us/overclock-android-device,review-1762-2.html
Some Screenshot :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Nazmi981 said:
Qwerty OC Kernel based on DarknightV2 kernel
- Better Battery life and Gaming !
Changelog ;
- Mostly features is coming from DarknightV2 kernel
- SmartMax cpu governor
- Yankactive cpu governor
- Ondemand_x cpu governor
- Alucard cpu governor
- blu_active cpu governor
- cyan cpu governor
- darkness cpu governor
- Re Oc Cpu to 2.2MHz
- Re Oc gpu to 750MHz
- updated display
- Fifops i/o
- Fifo i/o
- Sio i/o
- Sio plus i/o
- TripnDroid i/o
- Vr i/o
- Zen i/o
- Fast Charging
- missing header patch from revzz kernel
- adreno plus gpu governor
- adreno balanced gpu governor
- adreno guardian gpu governor
- gcam focus fix
- support for dts eagle audio
- Fp boost
- Added and switched thermal_engine to IntelliThermal v1.3
- removed unused some sync thing that eating battery , patched from mido Franco kernel
- improved interactive cpu gov, patch from mido Franco kernel
- update some display patch from mido Franco kernel
- some patches from mido franco and mido wolf kernel ( about performance )
- added adreno idler
Download (V9) : MOD EDIT: Link removed
My Kernel sources : https://github.com/Qwertyysl/kernel_xiaomi_msm8953-ysl
Thanks to Mahajan , Rama , Vaisakh , darkhzykh , Reynold , Lostark , GiovanniRN5 , Del , (i dont want to tag cos i dont want to disturb them ) , all of the YSL Kernel Development Team , YSL Beta team and YSL Community
Special Thanks :
emabertax
franciscofranco
and more ( if you feel up sad about credits , pm me )
Click to expand...
Click to collapse
Thanks bro, great work. It's only for Aosp ROM, or also for Xiaomi.eu rom?
KackBarton said:
Thanks bro, great work. It's only for Aosp ROM, or also for Xiaomi.eu rom?
Click to expand...
Click to collapse
Hello there~ thankyou for your support . If you see on the title , its only for ARM64 . So , its only for custom roms . Sorry .
Nazmi981 said:
Hello there~ thankyou for your support . If you see on the title , its only for ARM64 . So , its only for custom roms . Sorry .
Click to expand...
Click to collapse
Thanks bro, I have not read the title, my mistake.
:good:
Is it supporting wifi moniter mode with external adapter?
Sandeep 007 said:
Is it supporting wifi moniter mode with external adapter?
Click to expand...
Click to collapse
Sorry for late reply . And the answer is no . Maybe you should try Darkness Kernel .
Good as a daily driver for my phone. Really contented. No issues so far on my usage. InteractiveX + Fiops. Thanks for the kernel and I hope more governors and schedulers to come for this kernel :good:
Deivu-kun said:
Good as a daily driver for my phone. Really contented. No issues so far on my usage. InteractiveX + Fiops. Thanks for the kernel and I hope more governors and schedulers to come for this kernel :good:
Click to expand...
Click to collapse
Thankyou for your support :good:
On what rom gave 9hrs SOT
Sent from my Redmi S2 using Tapatalk
joblee said:
On what rom gave 9hrs SOT
Sent from my Redmi S2 using Tapatalk
Click to expand...
Click to collapse
Im using EvoX and my friends use Gsi and get the same result too . Btw , its depend on your usage so result may be different . Tq for your support.
Nazmi981 said:
Im using EvoX and my friends use Gsi and get the same result too . Btw , its depend on your usage so result may be different . Tq for your support.
Click to expand...
Click to collapse
Ok am using evox too am trying the non oc
Sent from my Redmi S2 using Tapatalk
Bom Dia
Quais as ROMS usada acima do print?
Carlito_Santos said:
Bom Dia
Quais as ROMS usada acima do print?
Click to expand...
Click to collapse
Hello there ! , English please ?
Good Morning
What ROMS are used above the print?
Carlito_Santos_ said:
Good Morning
What ROMS are used above the print?
Click to expand...
Click to collapse
One with EVO X , and annother one is GSI which is OOS port for our ysl .
Do I flash this custom kernel in this order?
1. Custom Rom (Havoc 3.2)
2. Open Gapps (Pico)
3. Magisk
4. Custom Kernel ( Qwerty No-OC)
It's my first time flashing a custom kernel.
My current setup, Havoc 3.2, OGapps (Pico) and default kernel, only last for an average of 5-6 hours.
So I'm excited to test this kernel and have a longer battery life. Thank you in advance by the way
jk_klyne08 said:
Do I flash this custom kernel in this order?
1. Custom Rom (Havoc 3.2)
2. Open Gapps (Pico)
3. Magisk
4. Custom Kernel ( Qwerty No-OC)
It's my first time flashing a custom kernel.
My current setup, Havoc 3.2, OGapps (Pico) and default kernel, only last for an average of 5-6 hours.
So I'm excited to test this kernel and have a longer battery life. Thank you in advance by the way
Click to expand...
Click to collapse
Hello there ! Here the right step ;
1. Flash rom and gapps (if needed) , REBOOT TO SYSTEM and Reboot back to twrp .
2. Flash Kernel and Magisk then reboot to system . Enjoy new kernel .
Nazmi981 said:
Hello there ! Here the right step ;
1. Flash rom and gapps (if needed) , REBOOT TO SYSTEM and Reboot back to twrp .
2. Flash Kernel and Magisk then reboot to system . Enjoy new kernel .
Click to expand...
Click to collapse
Thank you for the reply .
So far so good:
20% active drain (with gaming)
12% active drain during casual use (reading novels and manga)
I don't know if its a good rate of active drain for this specific kernel tbh, because I don't have anything to compare to but my battery life now is definitely longer than before.
UPDATED TO V13 !
Changelog ;
- Improvement for Deepsleep ( say no more to drain when sleeping )
Download link at front page . Thank you for using and supporting me . Maybe this will be my last work for 3.18 .
This kernel made my phone slightly faster.Thanks for this work.But,i am having an issue.After flashing this kernel,it made my phone wery hot when charging.It was cold before flashing this kernel.Can you fix it please? KernelV13_OC version.
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
God's Kernel-True God Of Kernels
ABOUT God's Kernel:
AudioGod said:
God's Kernel is a open source kernel designed to unleash the power of Redmi 1S. The Aim of This project is to give a most stable ,power-full,ultra-fast kernel with Max Battery Life which is required for every Redmi 1S user.
Click to expand...
Click to collapse
DISCLAIMER:
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Kernel currently supports
all KK LP MM CM AOSP and MIUI based roms
CHANGELOGS
DOWNLOAD LINKS:
GK_ARMANI_13052016_2047.zip - 6.67 MB
GK_ARMANI_MIUI_13052016_2102.zip - 7.38 MB
Older builds
INSTALLATION STEPS:
Minimum Requirements To Install God's Kernel:
Recommended Custom Recovery TWRP and a Rooted Device
Installation Procedure:
Boot Into Recovery Mode
Dirty flash the rom you are using (if needed gapps too)
Flash provide Kernel Zip
Flash UKM zip http://forum.xda-developers.com/redmi-1s/development/zip-synapse-universal-kernel-manager-r1-t3282133
Wipe Cache and Dalvik
Reboot To System
Follow Us on :
Google+
https://plus.google.com/communities/105868185017241678214
Huge Thanx to my tester :
@doylefermi
@vjraj (i still hate you for the R3 leak)
@deadpool01
@Megamite
@vedantkamlaskar
@TheStrix
n last but not the least @@Biplov Biswas
XDA:DevDB Information
[KERNEL][MM/LP/KK/MIUI][CM/AOSP][13-05-2016] God's Kernel R9, Kernel for the Xiaomi Redmi 1S
Contributors
Tarun93, fefifofum,rebelos,luffy.d, onano,Kra1o5 and all the other co devs
Source Code: https://github.com/tarunkapadia93/gk_armani/
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: R9
Stable Release Date: 2016-05-13
Created 2015-10-03
Last Updated 2016-05-13
Change log:
God's Kernel-R1
Built with UBERTC 6.0 and other tweaks.
Alucard Hotplug
USB Fast Charging
Franco's Custom thermal
Faux Sound
KCAL with the latest update
Fsync Disable
DT2W
Kexec[Multi Rom Support] latest update
CPU OC to 1.7Ghz
Selinux Permanently Permissive
General Optimization & Tweaks
God's Kernel-R2
rebased on LNX.LA.3.5.2.2.2-00510-8x26.0 (Xiaomi's Official Kikat kernel)
alucard updated
powersuspend hooks fixed
added sio i/o
add intellidemand intellimm intelliactive
USB force fast charge limit raised from 1000 mA to 1500 mA
NEON optimized kernel
exFAT support
LP and KK WiFi prima drivers updated to LA.BF.1.1.1_rb1.26 from prima: update to LA.BF.1.1.1_rb21
added MIUI support
DT2W and S2W+S2S removed for this release
God's Kernel-R3
huge cleanup n patching
zzmove smartmax elementalx yankactive alucard impulse
MM compatible
interactive governor updated
i/o scheds tuned
switched from alucard to bricked hotplug
replaced franco's thermal solution to simple thermals by sultanxda
selinux will be permissive on boot but can we changed
KSM added back
removed the **** old mulitcore powersavings which never worked right xD
God's Kernel-R4
Based on the latest msm8226 Caf tags thanx to @fefifoum
added a few governors (nightmare, darkness)
added new I/O scheds (FIFO SIOPLUS TRIPDROID)
tuned all the governors n i/o for better performance n smoothness
alucard_hotplug added back and removed bricked
LMK tune up
VFS tune up
allow userspace config of simple_ondemand
Native D2W
Adreno idler
KCAL updates
freezer patches
bam_dmux patches
seccomp patches
sched patches
God's Kernel-R5
Kexec removed (its not working ATM for any armani kernel)
Thermals tuned
Flicker fix
Splash add
Unbalanced IRQ on boot fixed
Zram updates
Governors tuned
GK logo added thanx to @ramashish Mishra for providing me with the logo and the banner
God's Kernel-R6
using the latest caf tags LA.BF.1.1.3-00910-8x26.0
synced with armani-dev's latest changes
Backport Adaptive LMK from Linux 3.10
Kexec added back
features exposed to user
-gentle fair sleepers
-arch power
-fsync
-software crc
removed MC powersaver again(i never really liked it xD)
Power efficient work-queues added back
added few more wakelock fixes
a few governors added xD
added a bricked msm_hotplug intelli plug
alucard synced and merged with the last sources from alucard24
Random32 updates
Zram updates
Powersuspend removed updated to State Notifier
DT2W removed for this release
VM reclaim
High performance sound
KSM
adreno idler disabled by default (enable if you wanna save some battery)
-Ofast graphite -ffast-math and karit optimization
lots of more stuff
God's Kernel-R7
-used the latest caf tag LA.BF.1.1.3-01010-8x26.0
-GPU OC fixed
-Simple Algo for nsn_aderno_tz (disable idler if you wanna enable this)
-switched back kk touch drivers
-MIUI hardware key fixes
-Hotplug
-alucard hotplug
-msm_hotplug (enabled by default)
-Governors
-alucard
-darkness
-elementalX
-HYPER
-impulse
-nightmare
-smartmax
-yankactive
-zzmoove
-new thermal solution
-XZ compression
-huge interactive updates to match up with the latest codes
-ondemand clean up
-F2FS updated from mainline Linux 4.4
DT2W added back
fast charge clean up n simpler implementation
fixed charging issues from faced in R6
major clean ups in kernel :victory:
God's Kernel-R8
- merged the latest LA.BF.1.1.3-01210-8x26.0 caf tag
- clean up n added builtin synapse and UKM access (no more flashing UKM )
- removed interactive updates for now
- updated the governors
-thermals retuned
- lots of minor tweaks and tune ups
- f2fs fix ups
God-R9
-merged the latest LA.BF.1.1.3-01510-8x26.0 caf tag
-retuned thermals and LMK
-interactive patches updated
GET LOGS IF YOU WANNA COMPLAIN ABOUT SOMETHING OR ELSE I AINT LISTENING TO ANY THING YOU SAY
here is a thread to understand how to get them
http://forum.xda-developers.com/showthread.php?t=2185929
Another kernel :laugh: awesome!
Waiting for download links gonna try it.
Thanks man..waiting for the link to test
i am really waiting for the kernel which will unleash the power of redmi 1s like 1.8ghz oc+650mhz gpu.
thanks for your hard work. thanks for you appreciation.
really looking forward for the kernel.......... thanks alot @Tarun93 your works have been tremendous......
Small query will it be compatible with miui 7???.
slst said:
really looking forward for the kernel.......... thanks alot @Tarun93 your works have been tremendous......
Small query will it be compatible with miui 7???.
Click to expand...
Click to collapse
working on that part mate
Tarun93 said:
working on that part mate
Click to expand...
Click to collapse
one request tarun pls dont limit the charging current.its very annoying to wait for 3hrs+ to charge mobile full.if you can increase then go for it higher than 1amp
Does it support f2fs, or i have to re-format data?
Tapatalk-kal küldve az én HM 1SW-el
*brings out the grapite sheets* we need to cnc a cool case
pls use latest optimization to give more ram and less ram usage to be used by system..
another custom kernel for our little beast.
does it compatible with miui?
or only cynogen based only.
thanks
delang said:
another custom kernel for our little beast.
does it compatible with miui?
or only cynogen based only.
thanks
Click to expand...
Click to collapse
build2 will be miui supported
Great work pal. Can't wait for links to be up.
Sent from my HM 1SW using Tapatalk
@Tarun93 what app u recomend to control this kernel?
A small review about the kernel..
The kernel is performing very good considering the initial release.
Using this kernel with latest temasek ROM.
Performance is good and no lags for normal use.
Multitasking performance is also good with few hiccups here and there.
Gaming performance is good.Able to play asphalt 8 at high settings with minor or no lags at stock clock speeds.
Battery performance ..... Yet to check...will update after 2-3 cycles
The only problem is that I'm unable to set max frequency to 1689 MHz through kernel auditor app.
It is stuck at 1401 MHz.
I request @Tarun93 to look into the issue.
Keep up the gud work!!
Oops double post
UltimateBlade said:
@Tarun93 what app u recomend to control this kernel?
A small review about the kernel..
The kernel is performing very good considering the initial release.
Using this kernel with latest temasek ROM.
Performance is good and no lags for normal use.
Multitasking performance is also good with few hiccups here and there.
Gaming performance is good.Able to play asphalt 8 at high settings with minor or no lags at stock clock speeds.
Battery performance ..... Yet to check...will update after 2-3 cycles
The only problem is that I'm unable to set max frequency to 1689 MHz through kernel auditor app.
It is stuck at 1401 MHz.
I request @Tarun93 to look into the issue.
Keep up the gud work!!
Click to expand...
Click to collapse
Firstly thnx for the stats n review
For multitasking I will recommend u tune the low memory killer to aggressive or very aggressive
Use kernel auditor for all the tweaking and for people who like to tweak a step further I recommend aero kernel control but u have to add the things manually by adding the sysfs path in the misc tab
As for the freq that's a know bug in kernel auditor that sometime there is a freq glitch and if u mean it was showing the 1689 step n u set it yet it was going back to 1401 the. Pls just calm it's normal as the thermal solution is doing it's work
*EDIT*
a request to.all the users pls do not set DT2W On boot via any app it will give u a non responsive screen on boot up I will fix it in the second build with the addition. To the miui support :thumbup:
Sent from my HM 1SW using XDA mobile app
Tarun93 said:
Firstly thnx for the stats n review
For multitasking I will recommend u tune the low memory killer to aggressive or very aggressive
Use kernel auditor for all the tweaking and for people who like to tweak a step further I recommend aero kernel control but u have to add the things manually by adding the sysfs path in the misc tab
As for the freq that's a know bug in kernel auditor that sometime there is a freq glitch and if u mean it was showing the 1689 step n u set it yet it was going back to 1401 the. Pls just calm it's normal as the thermal solution is doing it's work
*EDIT*
a request to.all the users pls do not set DT2W On boot via any app it will give u a non responsive screen on boot up I will fix it in the second build with the addition. To the miui support :thumbup:
Sent from my HM 1SW using XDA mobile app
Click to expand...
Click to collapse
Thanks dude!!! I was about to report the d2w bug.And one more thing ,the phone is getting very hot while charging in switch off mode.And can u please suggest screen color cal values for more amoled like color production.
UltimateBlade said:
Thanks dude!!! I was about to report the d2w bug.And one more thing ,the phone is getting very hot while charging in switch off mode.And can u please suggest screen color cal values for more amoled like color production.
Click to expand...
Click to collapse
Which rom ???
and for me 240 245 255 works decent brightness n contrast at 130
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
1. IO Scheduler- Zen, Deadline, BFQ, CFQ
2. Governers - BluActive, ElementalX, Darkness, Impulse, CAF_Active+ Stock
4. TCP Algorithms - Westwood, Cubic, Reno, Veno, Scalable.
5. F-Sync - Asynchronus & Dynamic
6. SoundControl
7. UberTC 5.3
8. LCD Notifier Driver
9. LCD Backlight Dimmer
10. Dynamic FSync
11. Swap Support
12. Color Control - KCal v2
13. Input Boost, CPU Boost & Touch Boost
14. OTG - NTFS_RW
15. Adreno Idler
16. Arch Power
17. Power Suspend
18. Toggles : CRC,FairSleepers, ArchPower,
19. WakeLock Control
20. Hotplug - Lazyplug
21. Thermal - intelliThermal
Downloads - AndroidFileHost
A. TWRP Method
1. Download the DragonXiaKernel_v3.x.zip
2. Boot to TWRP Recovery
3. Install -> Select DragonXiaKernel_v3.x.zip
4. Swipe to Install, Reboot.
✽ MI5-Devs, XDA-Devs, Harrynowl, AKT Devs, You All
✽ Dragons Logo Credit : Golden Dragon by Kiril Climson @ Dribbble
kernel_xiaomi_msm8996
Status: Stable
Current Stable Version: 3.4
Stable Release Date: 2016-11-01
Created 2016-10-16
Last Updated 2017-05-17
If you like my work, please feel free to donate.
Watch Video Reviews on Youtube by @musabcel (Thanks Mate)
ChangeLogs : Stable Builds
Code:
Changelog : 18 March
1. AKT Support for Stable builds (For OC build flash SD821 profiles)
2. Lineage Upstreams
3. Solved Hotplugs *****ery : Added Lazyplug
4. Adreno Boost : Enabled by default
5. New governors : Chill & Relaxed
6. Tweaked ZenTune
7. All varients got 2.15 Ghz CPU on Stable builds
Changelog : 20 February
1. Overclocked 32/64/128/ CPU @ 2.34/2.0 Ghz & GPU @652Mhz
2. Added back Hotplugs - MP-Decision & Zen-Decision
3. Fixed CRC-Toggle
4. Added Power Suspend Driver
5. Force Enable QC 3.0
6. FIOPS IO-Scheduler added back
7. Kernel Upstream
Changelog : 16 February
1. Kernel Upstream
2. Optimized TouchBosst, Kcal
3. Added new Governors
4. Overclocked Lite Varient CPU upto 2.34Ghz/2.0 Ghz
5. Kernel Upstream
Changelog : 26 January
1. OC builds are back
2. Kernel Upstreams
3. Removed Hotplugs - Temp
4. Massive Code Cleanup
Changelog : 07 January
1. Added Hotplug - intelliPlug
2. Added Thermal - intelliThermal Driver
3. USB Fast Charge @ 900mA
4. Tweaked QC2 & QC3 charge voltages
5. Added Darkness Gov
6. Added Energy Model Tweak - PowerSaving Profile
7. Support for OTG-NTFS_RW, Keyboard, Mouse.
8. Added Interface for GentleFairSleepers & ArchPower
8. Kernel Upstream + more
Changelog : 03 January
[U]Stable_Version[/U]
1. Kernel Upstreams
2. OTG-NTFS_RW Support
3. Stable GPU @ 652Mhz
[U]OC_Version[/U]
1. As above +
2. 32 GB Varient CPU @ 2.0Ghz/1.6Ghz with tweaked voltages
3. 64/128 GB Varient CPU @ 2.3Ghz/1.7Ghz with tweaked voltages
Changelog : 28 December
1. Kernel Upstream
2. Graphite & O3 Optimization
3. Security Patches
4. Improved Stability & Performance
5. F2FS Support
6. Massive Kernel Code Cleanup, removed Junk Add-ons
7. Overclocked GPU @ 652Mhz (All Varients)
8. Overclocked CPU @ 2.0/1.6 Ghz (Only 32GB Varient)
9. WakeLock Control
Changelog : 09 December [HOTFIX]
1. Kernel Upstream
2. Full F2FS Support
3. Tweaked Thermals
4. Changed CPU & GPU Frequencies to avoid Reboots, Lags & ScreenFreeze
5. GPU Input Boost
6. Performance & Stability Boost
Changelog : [06-December]
1. Overclocked 64/128GB Varient @2.3Ghz/1.7Ghz
2. Added FileSystems - NTFS, NFS
3. Quick WakeUp Driver
4. OTG-Ethernet
Changelog : [06-December]
1. Added Adreno Idler
2. Added More Governors - ALUCard, ZZMoove, HyperX, Intelliactive, Darkness + A Lot More
3. Fixed Touch Boost
4. Linux UpStream to 3.18.44
5. Fixed GPU Lag, now clocked @ 652Mhz
6. Arch Power & Capacity Enabled
Changelog : [05-December]
1. Added blu-active Governor
2. Upstream to Linux 3.18.43
Changelog : [03-December]
1. OverClocked CPU - 2.0Ghz/1.6Ghz (Only 32 GB Varient)
2. Overclocked GPU - 650 Mhz (All Varients)
3. Merged Latest Upstreams
Changelog : [02-December]
1. Backlight Dimmer
2. LCD Notifier
3. FSync - Async & Dynamic
4. Color Control
5. Added IO Schedulers
+ more optimizations
Changelog : [01-December]
1. Added More Governors
2. Compiled By UberTC 7.0
3. Kexec Hardboot Patched
4. Added Advance TCP Algorithms
+more optimizations
**** yea!
Thanks man,
I think I can speak for the whole Mi5 community:
We appreciate it very much.
You are the first!?
Ethested said:
**** yea!
Thanks man,
I think I can speak for the whole Mi5 community:
We appreciate it very much.
You are the first!��
Click to expand...
Click to collapse
You'r Welcome
finally! after so many issues there's some advance on mi5 kernel's, thanks friend! we all thank you, gonna try it in a few days.
Changelog : Alpha 1.1
1. Fixed Invert Switch
2. TCP Algorithms ++
3. IO Schedulers ++
4. KCal Improvised
Click to expand...
Click to collapse
Hi bro @WhyOrean
Does this kernel also have the Performance bug below 5% battery?
Edit: Thanks for JIO VoLTE.
Does the cm13 build in 2nd post also have the other two bugs?
I means ambient display and headphones no sound bug!
ravinder0003 said:
Hi bro @WhyOrean
Does this kernel also have the Performance bug below 5% battery?
Edit: Thanks for JIO VoLTE.
Does the cm13 build in 2nd post also have the other two bugs?
I means ambient display and headphones no sound bug!
Click to expand...
Click to collapse
Yeah I too have the same question, are the bugs present?
sai milind said:
Yeah I too have the same question, are the bugs present?
Click to expand...
Click to collapse
1. I dont use my phone when its below 15 % battery, if you use then probably I will add CHILL Governer in next build, hope it solves.
2. Headphone no luck till now, Im working on it though.
3. Ambient Display, waiting for CM guys and Martin to fix it.
sai milind said:
Yeah I too have the same question, are the bugs present?
Click to expand...
Click to collapse
Bugs still there:
Performance bug below 5% battery
Ambient display
Headphones no sound
Thanks the dev for JIO VoLTE and the kernel...
VoLTE is really a very good news...
atleast headphone sound fix can make the kernel and all rom awesome......
Since SlimRom uses caf commits this kernel will be compatible?
any news about overclocking for 32 gigs variant?thanks for the kernel though.
Kulwinder Singh said:
any news about overclocking for 32 gigs variant?thanks for the kernel though.
Click to expand...
Click to collapse
I'm sure it can be worked on..
https://github.com/CyanogenMod/andr...arch/arm/boot/dts/qcom/msm8996-regulator.dtsi
32GB and 64/128GB variant are different speed bins on the soc (a bit like old PVS on msm8974), one bin is stopping at 1.8/1.35/510 and the other goes to full 2.15/1.6/624
Harrynowl said:
I'm sure it can be worked on..
https://github.com/CyanogenMod/andr...arch/arm/boot/dts/qcom/msm8996-regulator.dtsi
32GB and 64/128GB variant are different speed bins on the soc (a bit like old PVS on msm8974), one bin is stopping at 1.8/1.35/510 and the other goes to full 2.15/1.6/624
Click to expand...
Click to collapse
you mean there is no hardware limitation?
Kulwinder Singh said:
you mean there is no hardware limitation?
Click to expand...
Click to collapse
Well, you cannot change bin id. But you can change the tables for that bin (usually). I'm not experienced dev though.
example (LITTLE cluster)
qcom,corner-frequencies =
/* Speed bin 0 */
<307200000 384000000 460800000
537600000 595200000 672000000
748800000 825600000 902400000
979200000 1056000000 1132800000
1190400000 1228800000 1305600000
1382400000 1459200000 1536000000
1593600000>,
/* Speed bin 1 */
<307200000 384000000 460800000
537600000 595200000 672000000
748800000 825600000 902400000
979200000 1056000000 1132800000
1190400000 1228800000 1305600000>;
Harrynowl said:
Well, you cannot change bin id. But you can change the tables for that bin (usually). I'm not experienced dev though.
example (LITTLE cluster)
qcom,corner-frequencies =
/* Speed bin 0 */
<307200000 384000000 460800000
537600000 595200000 672000000
748800000 825600000 902400000
979200000 1056000000 1132800000
1190400000 1228800000 1305600000
1382400000 1459200000 1536000000
1593600000>,
/* Speed bin 1 */
<307200000 384000000 460800000
537600000 595200000 672000000
748800000 825600000 902400000
979200000 1056000000 1132800000
1190400000 1228800000 1305600000>;
Click to expand...
Click to collapse
I guess current clock speed for MI5 is quite good, but if you want it for counting then probably there is a go..
Having ElementalX governer is the same as installing It's kernel from the official site?
http://elementalx.org
I found a vídeo of a guy with a OP3 tweaking a few things with this kernel and kernel audiutor and I would like to try it. https://youtu.be/ZSa-9aWmTFk
Is it possible? Thanks!
Enviado desde mi MI 5 mediante Tapatalk
contradriver said:
Having ElementalX governer is the same as installing It's kernel from the official site?
http://elementalx.org
I found a vídeo of a guy with a OP3 tweaking a few things with this kernel and kernel audiutor and I would like to try it. https://youtu.be/ZSa-9aWmTFk
Is it possible? Thanks!
Enviado desde mi MI 5 mediante Tapatalk
Click to expand...
Click to collapse
elementalx will have a few extras over a stock cm source with elementalx governer
I built a kernel using elementalx gov from oneplus 3 commits but it didn't work properly, the clusters would try sync clock speed (to 1.6ghz on all 4 core) rather than full speed. so it may need a little work fully, or maybe dev fixed it up. need source to know :good:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
FOR DEVS AND USERS BEFORE FIGHT ME CLICK HERE!: https://forum.xda-developers.com/showpost.php?p=70362424&postcount=3
Code:
DISCLAIMER!!
I am not responsible in any way for anything that can be happen to your device when you flashing my kernels.You do so at your own risk!
Features
Anykernel:
- Anykernel2 zip for maximum compatibility with all ROMs, CrazySuperKernel uses your existing ramdisk (Do NOT flash this over other custom kernels!You should only flash CrazySuperKernel over the kernel that came with your ROM!!)
Kernel tweaker app:
- CrazySuperKernel Adiutor (need download it from downloads)
Toolchain:
DF 4.9 Toolchain [latest update]
CPU:
- governors:
crazyactive(my governor:balance governor for great battery life and performance based on interactive)
interactive
impulse
ondemand
smartmax
zzmoove
ondemandplus
pegasusq
nightmare
conservative
lionheart
powersave
userspace
yankactive
smartmax_eps
intellidemand
intelliactive
- MSM Limiter
- input boost
- state notifier
IO schedulers:
bfq
tripndroid
cfq
noop
deadline
fiops
row
sio
zen
vr
fifo
TCP congestion controls:
cubic
bic
westwood
htcp
highspeed
hybla
reno
bic
hybla
vegas
lp
yeah
illinois
scalable
- tcp congestion changed to Westwood
GPU:
- governors:
msm-adreno-tz
simple_ondemand
powersave,performance
userspace
cpubw_hwmon
msm_cpufreq
- Adreno idler
- simple gpu algorithm
Thermal control:
- Intelli thermal v2
Hotplug:
- Disabled MP Decision hotplug
- Enabled Bricked Hotplug
- Prevent wakelock when ambiend display disabled(misc control tab)
Sound:
- Faux sound updated and fixed
- Slimbus overclock
More:
- Kernel runs with SELinux permissive by default
- init.d support
- insecure kernel (adb has root privileges)
- fast charge
- pvs level info
- Kcal v2
- Frandom support
- Disabled Arch Power
- CRC Check Disabled
- Gentle Fair Sleepers (Disabled by default)
- Enabled All Suspend and Idle Modes
- Power Suspend Mode/State
- Dynamic filesystem read-ahead
- A lot improvments
- A lot fixes
Download Link CrazySuperKernel [AnyKernel]:https://www.androidfilehost.com/?w=files&flid=138590
Download Link CrazySuperKernelAdiutor[Updated]:https://www.androidfilehost.com/?w=files&flid=139961
Installation guide
Do NOT flash this over other custom kernels!
You should only flash CrazySuperKernel over the kernel that came with your ROM!!
- Download Kernel from this thread
- Flash it with Recovery
[Wipe cache and Dalvik cache recommended]
- Then Reboot
Enjoy the CrazySuperKernel !!!!
Credits
thx Showp1984
thx Faux123
thx Savoca
thx RenderBroken
thx Neobuddy
thx Myfluxi
thx FranciscoFranco
thx SultanXDA
thx osm0sis
thx ShinyShide
thx bhb27
thx Lord Boeffla
thx yank555
thx apb_axel
thx the devs where made the cm14 bootable and working
thx CrazyGamerGR yeh me
Donators
red5pade
XDA:DevDB Information
CrazySuperKernel, Kernel for the OnePlus One
Contributors
CrazyGamerGR
Source Code: https://github.com/CrazyGamerGR/CrazySuperKernel-CM14.1-OPO
Kernel Special Features: check the feature list
Version Information
Status: Stable
Created 2016-12-25
Last Updated 2016-12-25
FAQ
Recommended app : CrazySuperKernel Adiutor
changelogs
v1.0/24-12-16
- initial release
v2.0/27-12-16
- CrazySuperKernel Adiutor (included)
- Deleted Synapse
- added stable faux sound
- some anykernel fixes
v3.0/31-12-16
- added fast charge
- deleted included CSKAdiutor (need download it)
- many fixes
v4.0/02-01-17
- updated fast charge
- pvs level info
- some fixes
If u use zzmove governor disable all the hotplugs coz it use its own hotplug as anyone knows.
[Q]How i select profile from kernel tweaker app?
[A]You need to go in governor tunable-profile number and select the number of the profile from the list.
Zzmove profiles
1 ) Default -> will set governor defaults
2 )ybat -> Yank Battery -> a very good battery/performance balanced setting - DEV-NOTE: highly recommended!
3 )ybatext-> Yank Battery Extreme -> like yank battery but focus on battery saving
4 )zzbat-> ZaneZam Battery -> a more 'harsh' setting strictly focused on battery saving - DEV-NOTE: might give some lags!
5 )zzbatp -> ZaneZam Battery Plus -> NEW! reworked faster battery setting - DEV-NOTE: recommended too!
6 )zzopt -> ZaneZam Optimized -> balanced setting with no focus in any direction - DEV-NOTE: relict from back in the days, even though some people still like it!
7 )zzmod -> ZaneZam Moderate -> NEW! setting based on 'zzopt' which has mainly (but not strictly only!) 2 cores online
8 )zzperf -> ZaneZam Performance -> all you can get from zzmoove in terms of performance but still has the fast - down scaling/hotplugging behaving
9 )zzinz-> ZaneZam InZane -> NEW! based on performance with new insane scaling active. a new experience!
10 )zzgame-> ZaneZam Gaming -> NEW! based on performance with scaling block enabled to avoid cpu overheating during gameplay
reserve1
reserve2
More and more kernels
Thanks!
Support fast charge?
assassin0408 said:
Support fast charge?
Click to expand...
Click to collapse
I will add soon usb fast charge and maybe charge control.
Thanks and great job!
Bobbi lim said:
Thanks and great job!
Click to expand...
Click to collapse
Thx m8,new features coming soon.
Merry Christmas!!!!!
assassin0408 said:
Support fast charge?
Click to expand...
Click to collapse
U from galaxy s advance mate
pankspoo said:
U from galaxy s advance mate
Click to expand...
Click to collapse
Yes thats true.. S advance. How do you know me?
Hello, Merry Christmas, I installed this kernel but do not work 2 things:
1- installed the kernel, but when I open Synapse tells me: NO UCI DETECT
2-UKM installed 3.8.1, but the audio portion can not be configured, even if imposed different or custom profiles, the values remain the same, and the sound remains very low.
I apologize for my English, but I'm using a translator !!!
NeGriTa79 said:
Hello, Merry Christmas, I installed this kernel but do not work 2 things:
1- installed the kernel, but when I open Synapse tells me: NO UCI DETECT
2-UKM installed 3.8.1, but the audio portion can not be configured, even if imposed different or custom profiles, the values remain the same, and the sound remains very low.
I apologize for my English, but I'm using a translator !!!
Click to expand...
Click to collapse
The synapse after a reboot should work its created for this device with many new features,its not same with the old synapse.But after many problems from the synapse i will not continue it,the new builds will be include other kernel tweaker app.
CrazyGamerGR said:
The synapse after a reboot should work its created for this device with many new features,its not same with the old synapse.But after many problems from the synapse i will not continue it,the new builds will be include other kernel tweaker app.
Click to expand...
Click to collapse
I downloaded from Synapse PlayStore ... several times ... but it does not go ... to make it work I had to install UKM 3.8.1 ... Where can I find UKM updated for your kernel?
NeGriTa79 said:
I downloaded from Synapse PlayStore ... several times ... but it does not go ... to make it work I had to install UKM 3.8.1 ... Where can I find UKM updated for your kernel?
Click to expand...
Click to collapse
It is included,you just instal synapse app from playstore and it work,you use RR?
CrazyGamerGR said:
It is included,you just instal synapse app from playstore and it work,you use RR?
Click to expand...
Click to collapse
If I do not install UKM not start me Synapse. I mount the NuclearRom 7.1.1 Version 1.2.0 BETA
The audio is very low and you can not configure it nessn so ... I tried to install Faux Sound Control ... But it does not change anything!
NeGriTa79 said:
If I do not install UKM not start me Synapse. I mount the NuclearRom 7.1.1 Version 1.2.0 BETA
The audio is very low and you can not configure it nessn so ... I tried to install Faux Sound Control ... But it does not change anything!
Click to expand...
Click to collapse
Its modded faux sound,tomorrow i ll have my new kernel tweaker app ready to fix all these problems from the Synapse.
CrazyGamerGR said:
Its modded faux sound,tomorrow i ll have my new kernel tweaker app ready to fix all these problems from the Synapse.
Click to expand...
Click to collapse
Very Thanks
Inviato dal mio A0001 utilizzando Tapatalk
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
C.A.F 4.9 KERNEL
What is this kernel ?
This Kernel is designed for stability , security optimized as possible with latest caf tag update .
What is features included in this Kernel ?
driver stable from daisy-o-oss in majority ( exept peelir and touchscreen... )
majority change driver come from : @33bca & @rama982
latest CAF Kernel from LA.UM.8.6.2.r1-07800-89xx.0
latest Prima WLAN LA.UM.8.6.2.r1-07800-89xx.0
latest Techpack audio LA.UM.8.6.2.r1-07800-89xx.0
compiled witch latest proton-clang 11 release
upstreamed to 4.9.231
-fp fpc/goodix gestures
-dt2w enabled for all screen !
*underclock clock GPU 19mhz
*GPU timeout 62s
*ttl support
*full support ipv6
*lz4 zram enabled
*governor cpu available : schedutil , powersave , performance
*schedutil governor improved ( cleaned and added lot commit linaro )
*cpufreq fix linaro
*exfat support
*scheduler i/o available :
- cfq (enabled in default ) , bfq , deadline , noop
*thermal change
*vdso32
*TCP congestion controller available:
TCP BIC
TCP CUBIC ( default enabled )
TCP WESTWOOD
TCP HTCP
TCP HSTCP
TCP HYBLA
TCP VEGAS
TCP NV
TCP SCALABLE
TCP LP
TCP VENO
TCP YEAH
TCP ILLINOIS
TCP DCTCP
TCP CDG
TCP BBR ( commit fix added )
*franco cpu-boost & Pull in Modified version for EAS cpu-boost
*touchboost option ( disabled in default )
*Wakelock blocker { block list enabled by nathanchance and franco }
*devfreq optimization
*sched optimization
*genirq optimization
*cpuidle / s2idle optimization
and probably more check sources for more information about features and change ...
Compatible Systems with this Kernel
This kernel is only compatible for Android 10 custom rom !
Stock android 10.0 and gsi from @phhusson is no supported , all stock vendor no support kernel 4.9 also !
DOWNLOAD
This Kernel will receive updates with new CAF tags and new upstream
Guide Install :
Boot into TWRP recovery
Flash the Kernel ZIP file & re-flash magisk if installed
wipe dalvik-cache & Reboot to System- enjoy!
Thanks for :
Xiaomi kernel sources
Code Aurora forum for caf 4.9 release
@rama982
@33bca
@krasCGQ
-and all other no mentionned in sources
XDAevDB Information
C.A.F Kernel 4.9 for Mi a2 lite and Redmi 6 pro (daisy / sakura)
Contributors :
@ada12
Source Code: https://github.com/RebornDaisyProject/daisy_msm8953/
Status: Stable
Update 13/06/2020 :
*everything is rebased check post
Update 24/06/2020 :
*big changelog see here : https://pastebin.com/z7zR7T6q
Update 29/06/2020 :
*changelog >>> https://del.dog/celytuconi.txt
Update 23/07/2020 :
*changelog >>> https://del.dog/yuworfimyk.txt
OMG... A powerful kernel!
Thanks guy
Thank you! need miui version ! ^^
miui cant support kernel 4.9 sadly same as stock vendor ! no video codec, cant take camera record and no fp fpc its need custom vendor ...
alcopsy said:
Thank you! need miui version ! ^^
Click to expand...
Click to collapse
Now installed on my phone with POSP on it. So far it's good.
good work <3
this kernel normally working with pexel experience rom with android 10?
After switch mobile data in other sim needs reboot phone for eneble mobile data
That bug is due to your rom ( trees sources ) . report to your maintener rom witch full log for help dev
andrey1981 said:
After switch mobile data in other sim needs reboot phone for eneble mobile data
Click to expand...
Click to collapse
This kernel is compatible witch all rom custom android 10.0
andrey1981 said:
this kernel normally working with pexel experience rom with android 10?
Click to expand...
Click to collapse
Which governor in this kernel saves maximum energy?
dt2w function not working in hx8399c touch panel in this kernel.
Other functuinons working normal.
thanks for great work!
Please fix dt2w for hx8399c touch panel for Redmi 6pro.
blu_schedutil save more energy ...
about hx8399c touch panel, thanks for report I will look on it for add
andrey1981 said:
Which governor in this kernel saves maximum energy?
dt2w function not working in hx8399c touch panel in this kernel.
Other functuinons working normal.
thanks for great work!
Please fix dt2w for hx8399c touch panel for Redmi 6pro.
Click to expand...
Click to collapse
ada12 said:
blu_schedutil save more energy ...
about hx8399c touch panel, thanks for report I will look on it for add
Click to expand...
Click to collapse
hx8399c doesn't work on many kustom roms and kernels. in stock miui work normal. this is original xiaomi panel
View attachment 4935969
ok... maybe driver no shared by xiaomi like fts before , If I find driver I tell you
andrey1981 said:
hx8399c doesn't work on many kustom roms and kernels. in stock miui work normal. this is original xiaomi panel
View attachment 4935969
Click to expand...
Click to collapse
Thanks bro, in latest kernel dt2w normal working with hx8399c.
Great work!!!
where are you take this driver?
Hi,
thanks for ur work.
My concern is unexpected shutdown. When battery gets old phone shutdowns himself at %30 battery level or so. Apple fixed it with reducing overall system power draw. At least we can play with Cpu voltages using these kernels. Can you develop simple button for it?
More info
1- https://forum.xda-developers.com/android/help/android-fail-safe-unexpected-shutdown-t4042257
2- https://support.apple.com/en-us/HT208387
3- Xiaomi Mi A2 Lite user experiencing unexpected shutdown.
https://www.reddit.com/r/Xiaomi/comments/eueg14/battery_problems/
1- For have better life battery, you can use battery charge limit [Root] app for limit your charge to 80%
2- in custom version kernel from Smartpack kernel manager you can set all perfctl value to -10mv for good undervolting phone
perfect_ said:
Hi,
thanks for ur work.
My concern is unexpected shutdown. When battery gets old phone shutdowns himself at %30 battery level or so. Apple fixed it with reducing overall system power draw. At least we can play with Cpu voltages using these kernels. Can you develop simple button for it?
More info
1- https://forum.xda-developers.com/android/help/android-fail-safe-unexpected-shutdown-t4042257
2- https://support.apple.com/en-us/HT208387
3- Xiaomi Mi A2 Lite user experiencing unexpected shutdown.
https://www.reddit.com/r/Xiaomi/comments/eueg14/battery_problems/
Click to expand...
Click to collapse
Update 23/02/2020 :
*ainur sound enabled
*state notifier
*voltage controls setting ( no default under )
*arm64: msm8953-regulator: >Optimized the regulator for good performance
*oc cpu 2152 mhz and oc 2208mhz
*oc gpu 725mhz
*under 19mhz gpu
*TTL fix
*lz4 zram updated and set in default
*adreno idler
*added 4 governor eas :
blu_schedutil
pixutil
smurfutil
pixel_smurfutil
waiting 4.9.215 OC version...
Fox kernel project for redmi s2/y2
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
*Disclaimer
* Your warranty is now void.
* We're not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
/
What is fox kernel ??
Fox kernel is a EAS "4.9" and caf "3.18" based kernel to get great battery life and performance , with also some personalization
we have also a Telegram gorup to support you if something gone wrong
Disclaimer
HTML:
This kernel is only for ARM64 custom roms , so , don't flash it on miui
plus , don't flash 4.9 version on 3.18 roms or viceversa
Download link
Download link of 4.9 kernel variant
Download link of 3.18 kernel variant
how to flash it ?
simply flash it on twrp
FEATURES for 3.18 variant
HTML:
- overclocked to 2,2ghz "Cpu" and 750mhz "Gpu"
- governors like lionfish , lionheart , smartmax , and more :D
- kcal , dts eagle , fast charge and backlight dimmer support
- always updated with latest caf code
- battery life and performance balaced
and more :D
FEATURES for 4.9 variant
HTML:
- overclocked to 2,2ghz "Cpu" and 750mhz "Gpu" + non overclocked version
- eas governors schedutil ; blu_schedutil ; pixutil ; pixel_smurfutil
- kcal , fast charge and backlight dimmer support
- always updated with latest linux kernel updated
- wireguard support
- proper support on f2fs
- battery life and performance balaced
and more :D
if you have any question , join on our Telegram gorup
i want to thanks mahajant99 , rama , m_vaisakh for make arm64 possible on redmi s2 and darkhzy_kh and Nazmi981 who helped me to do this kernel
XDA:DevDB Information
Fox kernel , Kernel for the Xiaomi Redmi S2
Contributors
Its_Vixano, mahajant99, m_vaisakh, rama982 , darkhzy_kh , Nazmi981
Source Code: https://github.com/Fox-kernel/Fox_kernel_ysl_4.9
Kernel Special Features: Fox kernel is a EAS based kernel to get great battery life and performance , with also some personalization
Version Information
Status: Stable
Current Stable Version: r1.0
Stable Release Date: 2020-03-18
Created 2020-03-22
Last Updated 2020-10-09
You mentioned that nazmi has helped you to make this kernel.So,it means he has abandoned his qwerty kernel and this kernel is the successor of previous one?Is it better than the Gaming mode kernel?Have you benchmarked them both?
adnan1091 said:
You mentioned that nazmi has helped you to make this kernel.So,it means he has abandoned his qwerty kernel and this kernel is the successor of previous one?Is it better than the Gaming mode kernel?Have you benchmarked them both?
Click to expand...
Click to collapse
Sadly yes , after someone kanged his repo by saying he is made by own work of the past
Btw yes this is the successor of qwerty kernel , and for gaming , it works very well
For benchmark , i did a v3 that will get 100k on atuntu with the same frequency "yet on testing"
It's really wierd that because of forking or participation in a project.Shame on that guy,somebody can take down an open source
project. But,I'm glad to see that you've been
interested in his project too.Without doubts, the
kernel of Nazmi was the best kernel for s2 until today.
v3 update
v3 is now up
changelog
HTML:
- Update prima drivers from LA.UM.8.6.r1-04000-89xx.0
- Compiled with GCC 9.3 (experimental)
- Fixed battery 2% drop (experimental)
- Reduced the ticker to 80hz
- Disable GPU wake up on touch event
- Added some lz4 thinks
- Added dts eagle mod support
- Added dynamic Fsync support
- Added Intelliactive and Smartmax_eps Governor
- Added IntelliThermal V3.1
- Added Anxiety I/O scheduler
- Dts bus improvement
- Msm thermal optimizations
- Reduced kernel size
adnan1091 said:
It's really wierd that because of forking or participation in a project.Shame on that guy,somebody can take down an open source
project. But,I'm glad to see that you've been
interested in his project too.Without doubts, the
kernel of Nazmi was the best kernel for s2 until today.
Click to expand...
Click to collapse
yeah , that guy also faked 4.9 kernel on ysl beta group "official one" and we kicked him .
then . after 1 day the release of qwerty turbo , he kanged some features from Nazmi repo by calling his own work from the past.
btw yeah , Nazmi one was the best
i will try my best to keep alive that project :good:
V3 is really balanced keep up the good work!!!
Its_Vixano said:
Sadly yes , after someone kanged his repo by saying he is made by own work of the past
Btw yes this is the successor of qwerty kernel , and for gaming , it works very well
For benchmark , i did a v3 that will get 10k on atuntu with the same frequency "yet on testing"
Click to expand...
Click to collapse
Is it faster than the 2.4ghz cpu and 905 mhz gpu kernel of nazmi??
¿Can wee see someday a 3Ghz overclock? I saw that the Mi A1 overclock reach to 3Ghz with the same processor (SD 625).
In antutu Mi A1 scores 17xxxx points, more than redmi note 7 and near to redmi note 8
Hi bro please make a new kernel with extreme clocks , which will help gamers like me
Its_Vixano said:
Sadly yes , after someone kanged his repo by saying he is made by own work of the past
Btw yes this is the successor of qwerty kernel , and for gaming , it works very well
For benchmark , i did a v3 that will get 100k on atuntu with the same frequency "yet on testing"
Click to expand...
Click to collapse
How i can download
4.9 is out now
4.9 kernel update
changelog:
HTML:
- Initial 4.9 version
- Improved battery and performance
- now with oc and non oc version
- Merged 4.9.225
- Update wireguard to v1.0.20200506
- Proper support to f2fs
- Mics optimization
- Introduce state notifier
- Optimized temps
- Introduce new eas governors "schedutil ; blu_schedutil ; pixutil ; pixel_smurfutil"
download link on op
enjoy
thx for this kernel
thx for this kernel
thanks bro... so far good :good:
New 4.9 update
Changelog :
HTML:
- Merged 4.9.226
- Ticker at 250hz
- Improved battery and performance
- CPU undervolt to 70mv
- Use -O3 optimization level
- Dts eagle support
- add NEON accelerated XOR implementation
download link on op
enjoy
very nice kernel! getting a much smoother gameplay with OC build, thank you so much! :fingers-crossed:
New 4.9 update
Changelog:
HTML:
- Rebased build
- Reduced zip size
- Built with arter GCC 9.3.0
- Merged 4.9.227
- Merged kernel.lnx.4.9.r11-rel from caf
- Improved DeepSleep
- Improved Idle Drain
- Improved Jitter
- Ticker at 80hz
- Revert undervolt for the moment
- Min Cpu freq at 1.0-1.6-1.9-2.0 gHz "for better efficiency
- More , check git lel
download link on op
enjoy
Its_Vixano said:
Changelog:
- Rebased build- Reduced zip size- Built with arter GCC 9.3.0- Merged 4.9.227- Merged kernel.lnx.4.9.r11-rel from caf- Improved DeepSleep- Improved Idle Drain- Improved Jitter- Ticker at 80hz- Revert undervolt for the moment- Min Cpu freq at 1.0-1.6-1.9-2.0 gHz "for better efficiency- More , check git lel
download link: MOD EDIT: Link Removed
enjoy
Click to expand...
Click to collapse
bro... the latest 227 version perhaps you could re checked, bcz it's give. me error notice in root side
busybox mountapplet missing/failed..
i also get same issues in 224 version...
thanks....
great work... :good:
¿64 bits?
New 4.9 build
Changelog :
HTML:
- Merged 4.9.228
- Import Xiaomi USB Changes "now don't spam me for slow charge kthx"
- Add cpufreq changes for ysl
- Fixed some Flashlight Issue
Download link : MOD EDIT: Link Removed
Enjoy