{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
God's Kernel-True God Of Kernels
ABOUT God's Kernel:
AudioGod said:
God's Kernel is a open source kernel designed to unleash the power of Redmi 1S. The Aim of This project is to give a most stable ,power-full,ultra-fast kernel with Max Battery Life which is required for every Redmi 1S user.
Click to expand...
Click to collapse
DISCLAIMER:
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Kernel currently supports
all KK LP MM CM AOSP and MIUI based roms
CHANGELOGS
DOWNLOAD LINKS:
GK_ARMANI_13052016_2047.zip - 6.67 MB
GK_ARMANI_MIUI_13052016_2102.zip - 7.38 MB
Older builds
INSTALLATION STEPS:
Minimum Requirements To Install God's Kernel:
Recommended Custom Recovery TWRP and a Rooted Device
Installation Procedure:
Boot Into Recovery Mode
Dirty flash the rom you are using (if needed gapps too)
Flash provide Kernel Zip
Flash UKM zip http://forum.xda-developers.com/redmi-1s/development/zip-synapse-universal-kernel-manager-r1-t3282133
Wipe Cache and Dalvik
Reboot To System
Follow Us on :
Google+
https://plus.google.com/communities/105868185017241678214
Huge Thanx to my tester :
@doylefermi
@vjraj (i still hate you for the R3 leak)
@deadpool01
@Megamite
@vedantkamlaskar
@TheStrix
n last but not the least @@Biplov Biswas
XDA:DevDB Information
[KERNEL][MM/LP/KK/MIUI][CM/AOSP][13-05-2016] God's Kernel R9, Kernel for the Xiaomi Redmi 1S
Contributors
Tarun93, fefifofum,rebelos,luffy.d, onano,Kra1o5 and all the other co devs
Source Code: https://github.com/tarunkapadia93/gk_armani/
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: R9
Stable Release Date: 2016-05-13
Created 2015-10-03
Last Updated 2016-05-13
Change log:
God's Kernel-R1
Built with UBERTC 6.0 and other tweaks.
Alucard Hotplug
USB Fast Charging
Franco's Custom thermal
Faux Sound
KCAL with the latest update
Fsync Disable
DT2W
Kexec[Multi Rom Support] latest update
CPU OC to 1.7Ghz
Selinux Permanently Permissive
General Optimization & Tweaks
God's Kernel-R2
rebased on LNX.LA.3.5.2.2.2-00510-8x26.0 (Xiaomi's Official Kikat kernel)
alucard updated
powersuspend hooks fixed
added sio i/o
add intellidemand intellimm intelliactive
USB force fast charge limit raised from 1000 mA to 1500 mA
NEON optimized kernel
exFAT support
LP and KK WiFi prima drivers updated to LA.BF.1.1.1_rb1.26 from prima: update to LA.BF.1.1.1_rb21
added MIUI support
DT2W and S2W+S2S removed for this release
God's Kernel-R3
huge cleanup n patching
zzmove smartmax elementalx yankactive alucard impulse
MM compatible
interactive governor updated
i/o scheds tuned
switched from alucard to bricked hotplug
replaced franco's thermal solution to simple thermals by sultanxda
selinux will be permissive on boot but can we changed
KSM added back
removed the **** old mulitcore powersavings which never worked right xD
God's Kernel-R4
Based on the latest msm8226 Caf tags thanx to @fefifoum
added a few governors (nightmare, darkness)
added new I/O scheds (FIFO SIOPLUS TRIPDROID)
tuned all the governors n i/o for better performance n smoothness
alucard_hotplug added back and removed bricked
LMK tune up
VFS tune up
allow userspace config of simple_ondemand
Native D2W
Adreno idler
KCAL updates
freezer patches
bam_dmux patches
seccomp patches
sched patches
God's Kernel-R5
Kexec removed (its not working ATM for any armani kernel)
Thermals tuned
Flicker fix
Splash add
Unbalanced IRQ on boot fixed
Zram updates
Governors tuned
GK logo added thanx to @ramashish Mishra for providing me with the logo and the banner
God's Kernel-R6
using the latest caf tags LA.BF.1.1.3-00910-8x26.0
synced with armani-dev's latest changes
Backport Adaptive LMK from Linux 3.10
Kexec added back
features exposed to user
-gentle fair sleepers
-arch power
-fsync
-software crc
removed MC powersaver again(i never really liked it xD)
Power efficient work-queues added back
added few more wakelock fixes
a few governors added xD
added a bricked msm_hotplug intelli plug
alucard synced and merged with the last sources from alucard24
Random32 updates
Zram updates
Powersuspend removed updated to State Notifier
DT2W removed for this release
VM reclaim
High performance sound
KSM
adreno idler disabled by default (enable if you wanna save some battery)
-Ofast graphite -ffast-math and karit optimization
lots of more stuff
God's Kernel-R7
-used the latest caf tag LA.BF.1.1.3-01010-8x26.0
-GPU OC fixed
-Simple Algo for nsn_aderno_tz (disable idler if you wanna enable this)
-switched back kk touch drivers
-MIUI hardware key fixes
-Hotplug
-alucard hotplug
-msm_hotplug (enabled by default)
-Governors
-alucard
-darkness
-elementalX
-HYPER
-impulse
-nightmare
-smartmax
-yankactive
-zzmoove
-new thermal solution
-XZ compression
-huge interactive updates to match up with the latest codes
-ondemand clean up
-F2FS updated from mainline Linux 4.4
DT2W added back
fast charge clean up n simpler implementation
fixed charging issues from faced in R6
major clean ups in kernel :victory:
God's Kernel-R8
- merged the latest LA.BF.1.1.3-01210-8x26.0 caf tag
- clean up n added builtin synapse and UKM access (no more flashing UKM )
- removed interactive updates for now
- updated the governors
-thermals retuned
- lots of minor tweaks and tune ups
- f2fs fix ups
God-R9
-merged the latest LA.BF.1.1.3-01510-8x26.0 caf tag
-retuned thermals and LMK
-interactive patches updated
GET LOGS IF YOU WANNA COMPLAIN ABOUT SOMETHING OR ELSE I AINT LISTENING TO ANY THING YOU SAY
here is a thread to understand how to get them
http://forum.xda-developers.com/showthread.php?t=2185929
Another kernel :laugh: awesome!
Waiting for download links gonna try it.
Thanks man..waiting for the link to test
i am really waiting for the kernel which will unleash the power of redmi 1s like 1.8ghz oc+650mhz gpu.
thanks for your hard work. thanks for you appreciation.
really looking forward for the kernel.......... thanks alot @Tarun93 your works have been tremendous......
Small query will it be compatible with miui 7???.
slst said:
really looking forward for the kernel.......... thanks alot @Tarun93 your works have been tremendous......
Small query will it be compatible with miui 7???.
Click to expand...
Click to collapse
working on that part mate
Tarun93 said:
working on that part mate
Click to expand...
Click to collapse
one request tarun pls dont limit the charging current.its very annoying to wait for 3hrs+ to charge mobile full.if you can increase then go for it higher than 1amp
Does it support f2fs, or i have to re-format data?
Tapatalk-kal küldve az én HM 1SW-el
*brings out the grapite sheets* we need to cnc a cool case
pls use latest optimization to give more ram and less ram usage to be used by system..
another custom kernel for our little beast.
does it compatible with miui?
or only cynogen based only.
thanks
delang said:
another custom kernel for our little beast.
does it compatible with miui?
or only cynogen based only.
thanks
Click to expand...
Click to collapse
build2 will be miui supported
Great work pal. Can't wait for links to be up.
Sent from my HM 1SW using Tapatalk
@Tarun93 what app u recomend to control this kernel?
A small review about the kernel..
The kernel is performing very good considering the initial release.
Using this kernel with latest temasek ROM.
Performance is good and no lags for normal use.
Multitasking performance is also good with few hiccups here and there.
Gaming performance is good.Able to play asphalt 8 at high settings with minor or no lags at stock clock speeds.
Battery performance ..... Yet to check...will update after 2-3 cycles
The only problem is that I'm unable to set max frequency to 1689 MHz through kernel auditor app.
It is stuck at 1401 MHz.
I request @Tarun93 to look into the issue.
Keep up the gud work!!
Oops double post
UltimateBlade said:
@Tarun93 what app u recomend to control this kernel?
A small review about the kernel..
The kernel is performing very good considering the initial release.
Using this kernel with latest temasek ROM.
Performance is good and no lags for normal use.
Multitasking performance is also good with few hiccups here and there.
Gaming performance is good.Able to play asphalt 8 at high settings with minor or no lags at stock clock speeds.
Battery performance ..... Yet to check...will update after 2-3 cycles
The only problem is that I'm unable to set max frequency to 1689 MHz through kernel auditor app.
It is stuck at 1401 MHz.
I request @Tarun93 to look into the issue.
Keep up the gud work!!
Click to expand...
Click to collapse
Firstly thnx for the stats n review
For multitasking I will recommend u tune the low memory killer to aggressive or very aggressive
Use kernel auditor for all the tweaking and for people who like to tweak a step further I recommend aero kernel control but u have to add the things manually by adding the sysfs path in the misc tab
As for the freq that's a know bug in kernel auditor that sometime there is a freq glitch and if u mean it was showing the 1689 step n u set it yet it was going back to 1401 the. Pls just calm it's normal as the thermal solution is doing it's work
*EDIT*
a request to.all the users pls do not set DT2W On boot via any app it will give u a non responsive screen on boot up I will fix it in the second build with the addition. To the miui support :thumbup:
Sent from my HM 1SW using XDA mobile app
Tarun93 said:
Firstly thnx for the stats n review
For multitasking I will recommend u tune the low memory killer to aggressive or very aggressive
Use kernel auditor for all the tweaking and for people who like to tweak a step further I recommend aero kernel control but u have to add the things manually by adding the sysfs path in the misc tab
As for the freq that's a know bug in kernel auditor that sometime there is a freq glitch and if u mean it was showing the 1689 step n u set it yet it was going back to 1401 the. Pls just calm it's normal as the thermal solution is doing it's work
*EDIT*
a request to.all the users pls do not set DT2W On boot via any app it will give u a non responsive screen on boot up I will fix it in the second build with the addition. To the miui support :thumbup:
Sent from my HM 1SW using XDA mobile app
Click to expand...
Click to collapse
Thanks dude!!! I was about to report the d2w bug.And one more thing ,the phone is getting very hot while charging in switch off mode.And can u please suggest screen color cal values for more amoled like color production.
UltimateBlade said:
Thanks dude!!! I was about to report the d2w bug.And one more thing ,the phone is getting very hot while charging in switch off mode.And can u please suggest screen color cal values for more amoled like color production.
Click to expand...
Click to collapse
Which rom ???
and for me 240 245 255 works decent brightness n contrast at 130
Related
God's KernelGod's Kernel-True God Of Kernels
ABOUT God's Kernel:
AudioGod said:
God's Kernel is a open source kernel designed to unleash the power of Mi3/Mi4. The Aim of This project is to give a most stable ,power-full,ultra-fast kernel with Max Battery Life which is required for every Mi3/Mi4 user.
Click to expand...
Click to collapse
DISCLAIMER:
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CHANGE LOG:
God's Kernel-R1
Built with UBERTC 6.0 and other tweaks.
Alucard Hotplug
USB Fast Charging
Franco's Custom thermal
Faux Sound
KCAL with the latest update
Fsync Disable
Selinux Permanently Permissive
General Optimization & Tweaks
God's Kernel-R2
Alucard_hotplug patches n dependencies added
MSM_Limiter
User Voltage Control
Intellidemand Intelliactive intelliminmax
kexec aka MultiRom support [Need's testing(WIP)]
Cpufreq glitches fixed which some user's faced
added support disabling keys
the kernel now supports CM and AOSP based rom and MIUI too
Much more stable snappy n battery efficient now
God's Kernel-R3
fully rebased on CAF LNX.LA.3.5.2.2.1-04310-8x74.0 (Xiaomi KK kernels)
added a optional build of 2.649 Ghz oc
gpu oc of 657Mhz
alucard updated n tuned
added support for Mi4
kexec removed due to lag of testing
intellidemand intelliactive intellimm and alucard governor major updates
God's Kernel-R4
2.8Ghz Overclock
yankactive governor
impulse governor
ElementalX governor
GPU overclock reworked as a few complaint about sudden lags sometimes
-O3 optimizations and Cortex-A15 optimizations
UBERTC 6.0 Latest toolchain used
MM support added
new simple thermals by sultanxda
global -10mv 100% stable
God's Kernel-R5
Major rebase and clean up
kexec working confirmed
gpu oc fixed
scrolling lags fixed
fixed the clean flash bootloops
memutil optimizations
workqueues updates n patches from upstream
usb fast charging improved
selinux patches updated
MM compatible
retuned simple thermals
ksm tweaked and added (no camera crashes recorded yet)
VFS RCU FREEZER SECCOMP LMK MDS n other updates
huge cleanup n patching
zzmove smartmax alucard
interactive governor updated
i/o scheds tuned
switched from alucard to bricked hotplug
selinux will be permissive on boot but can we changed
KSM added
removed the **** old mulitcore powersavings which never worked right xD
fixed Mi4w issues but they wont get multirom(rom support)
this kernel will not work on latest CM-13 and Ivan's MM AOSP and is working on all other ROMs :good:
OC removed i dont want complications i will test more n get a sweet spot i m quite busy these days to work on things so removed it for everyone's good
DOWNLOAD LINKS:
GK_CANCRO_MM_LP_MIUI_KK_R5_29112015_0232.zip
GK_MI4W_ONLY_MM_LP_MIUI_KK_R5_29112015_0234.zip
MIRROR LINK
INSTALLATION STEPS:
Minimum Requirements To Install God's Kernel:
Recommended Custom Recovery TWRP and a Rooted Device
Installation Procedure:
Boot Into Recovery Mode
Dirty flash the current rom you are on
Dirty flash gapps(if needed)
Flash provide Kernel Zip
Reboot To System
Follow Us on :
Google+
https://plus.google.com/communities/105868185017241678214
XDA:DevDB Information
[KERNEL][LP/MIUI/MM][Mi3/Mi4]God's Kernel R5, Kernel for the Xiaomi Mi 3
Contributors
Tarun93
Source Code: https://github.com/tarunkapadia93/gk_cancro
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: R5
Stable Release Date: 2015-11-29
Created 2015-10-05
Last Updated 2015-11-28
Reserved
Older builds:
R1
R2
R3
R4
One more kernel.. Reserved
Works on official cm?
Which ROMs does this works on?
You did have mentioned KitKat, so the Wi-Fi works or not coz other kernels work too but Wi-Fi doesn't
I can't wait to test this baby and see how it develops. Thank you for your hard work.
wowwww
R1 Released
Links updated sorry guys was busy with a few things.
Works on dirty unicorns last test build, thanks @Tarun93 i'll test it
Rom Dirty Unicorn TEST-v9.7
- In kernel adiutor the max cpu frequency is stuck at 1497mhz, if I try to enhance it will return back to 1497mhz. (Rebooted and seems to stay at 2265mhz)
- I can see only interactive, conservative, powersafe and performance governor. No seen of your governors :c
Works very smooth also at 1497mhz, nice job!
Hope you implement D2tw in future, in these days i'll test the battery and tell you all the details
does it work on official miui?
[/COLOR]
josedb said:
does it work on official miui?
Click to expand...
Click to collapse
Yes, it's for MIUI too!
BIOLorenz said:
Works on dirty unicorns last test build, thanks @Tarun93 i'll test it
Rom Dirty Unicorn TEST-v9.7
- In kernel adiutor the max cpu frequency is stuck at 1497mhz, if I try to enhance it will return back to 1497mhz. (Rebooted and seems to stay at 2265mhz)
- I can see only interactive, conservative, powersafe and performance governor. No seen of your governors :c
Works very smooth also at 1497mhz, nice job!
Hope you implement D2tw in future, in these days i'll test the battery and tell you all the details
Click to expand...
Click to collapse
that's normal bro you phone might be warm at that time n its the thermal are throttling it down to get the temps lower you might have lowered the thermal limit
the thermal limit can be set manually with the help of kernel auditor
once the temp hits the temp limit = 1728000,
5c over set thermal limit= 1497600,
9c over set thermal limit = 1036800,
12 c over set thermal limit = 729600,
once the temperature is under the set temp limit it will be back to the normal freq
make's sense
n yes i have not added any governors as this was my first release i wanted it to be as basic as possible
i feel DT2W is still in BETA stage n i cant risk my users getting random reboots n things. will add it soon tho @vasishath (original porter of DT2W) is working hard on it so should be added soon
josedb said:
does it work on official miui?
Click to expand...
Click to collapse
yes sir
Which app to use for full control .And more accurately faux sound
Sent from my MI 3W using Tapatalk
chitalov said:
Which app to use for full control .And more accurately faux sound
Sent from my MI 3W using Tapatalk
Click to expand...
Click to collapse
Kernel adiutor covers most of the things
BUT if you are old school sysfs types n then use Aero Kernel Control n add you custom sysfs paths in the misc settings tab :fingers-crossed:
for faux sound its kernel adiutor will do well
I might have missed it, but i can't find the commit for hardware key disabling fix for cyanogenmod. Can you apply it? It's kind of important for me since my phone's capacitive key backlight is kind of screwed up(annoyingl6 uneven birghtness) and i had to use on screen button.
https://github.com/CyanogenMod/andr...mmit/a7347293af56824cf08008e049f3215b512177e5
Bro take your time and implement dt2w.Waiting for it. Best of luck.
Sent from my MI 3W using Tapatalk
This kernel has SOD in Blisspop
UPDATE: Fixed cleaning dalvik + cache
Nice options in kernel, but, in last miui the phone wont sleep. Battery charge is absoluty wrong.
gingerboy92 said:
I might have missed it, but i can't find the commit for hardware key disabling fix for cyanogenmod. Can you apply it? It's kind of important for me since my phone's capacitive key backlight is kind of screwed up(annoyingl6 uneven birghtness) and i had to use on screen button.
https://github.com/CyanogenMod/andr...mmit/a7347293af56824cf08008e049f3215b512177e5
Click to expand...
Click to collapse
noted will add in the soon coming R2 i have added a few more fixes already
josedb said:
Nice options in kernel, but, in last miui the phone wont sleep. Battery charge is absoluty wrong.
Click to expand...
Click to collapse
recalibrate your batter n clear the caches again use apps like Wakelock detector or better battery stats to find out wat draining your battery feel free to share the stats
Tarun93 said:
noted will add in the soon coming R2 i have added a few more fixes already
recalibrate your batter n clear the caches again use apps like Wakelock detector or better battery stats to find out wat draining your battery feel free to share the stats
Click to expand...
Click to collapse
thats the problem, i was using wakelock detector, there were no wakelocks, but it shows no sleeping in total statistics.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
A Kernel For OPO based on CM13 Branch
I will not be responsible for any damage to phone.
Click to expand...
Click to collapse
I do not work for money. I work for my Pleasure and Happiness which I get from developing, I will never ever ask you to donate me but if ever you like my work please press a THANKS which really motivates me to bring more STuFF!!! .
Click to expand...
Click to collapse
Features:
UKM support(synapse)
Intelli-Thermal v2 commits embeded in MSM Thermal(No separate driver... phone will not HEAT NOW )
Kcal control by @savoca (Ton thanks for making this)
Sound Control (Gain Volume)
Simple GPU Algorithm (faux123)
Camera Tweaks(Supressive logging ecc ecc)
CPU OC fixed - OC upto 2.88 ghz
Adreno Idler
KSM Optimized
Thermal Conflicts Fixed
Power-Efficient Qorques
More to come
Credits
cyanogen team
@ak
@Megatron007 ( A good Friend of Mine. Helped me however, whenever I wanted. Because Of him this became possible )
@savoca for kcal
XDA
Please Let Me know if someones missing out there
Bugs
None
This kernel is Stable for now.. No major bugs except SeLinux... It should work with all the CM14 based roms. Nd about features, i will add them step. By step to. Make the kernel most stable and battery friendly.. Will keep this thread up time by providing all updates whenever necessary.
XDA:DevDB Information
Andy Kernel, Kernel for the OnePlus One
Contributors
Andy1911
Source Code: https://github.com/Andy1911/Andy_Onepone
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: 1.1
Stable Release Date: 2015-11-25
Created 2015-11-25
Last Updated 2016-10-20
Reserved
FAQ.s
1. Device Rebooting?
See to it that CPU is not OC, No two Hotplugs at a Multiple Time, See the Download link of 06/06nightly and flash blobs
2. F2fs?
Yeah COMPLETELY SUPPORTED
3. Wanna Ask Battery Saving Settings?
Put down lower CPU clock to 286mhz, Underclock device ecc
4. What can be the ETA?
I am trying best to Update the Kernel As soon as possible, Have Patience
5. Want some Feature?
Will surely Include if Stability is not endangered
6. Will this Kernel work on XYZ rom?
This rom is made only for CM-13 based ROMS(Except Sultans CAF). It will not work on any other rom like DU, Omni etc
7. Having Bugs in Nightlies?
But obvious to have them as name says it all HAHAHA.... If encountered any bug in nightly except reboot send along with log and last_kmsg..
8. Having Bug in RC?
Mostly its a stable build, if encountered any bug **ONLY ON CM13 NIGHTLIES**, PM me or Post Here
9. Will This Work on Snapshot Builds by CM?
Yes, Bcoz CM uses same set of Kernel and device tree just source is cleaned up and mess which causes reboots and other WIP **** is taken out
Changelog
Download Links And ChangeLog
RC Builds
20160614 - Grab me Here!
3.10 Upstream (Credits @ erorcun)
Lot many changes...
patches from lightning kernel and radioactive kernel
improvisations from AK kernel
refinements from boeffla kernel
Synaptics from Sultanxda
Optimized SLUB
Optimizations on lot many other things... (Feel the difference)
Latest inline with CM13
Kernel Version 3.4.11x
20160306 - Grab it Here!
Updated With Latest CM source (New Vendor Blobs now Inn)
-Download New Vendor Files Merged by Me
- Install The Zip as it is along with the kernel
(This update was only meant to fix the Random Reboots)
20160303 - Grab it Here!
Latest cm kernel
Latest Ramdisk
Adreno Idler improvements
Cpufreq Optimizations
Power drivers Updates
Kernel Power Suspend Mode
Lots of optimizations plus ton of improvisations
Stable fr use with Latest March Nightlies
20160109 - Grab It Here!
Alucard Hotplug
Cpufreq Optimizations
Worque Optimizations
Added Custom Splash Screen (Hope you All Like)
UKM modded per Kernel
Charging level interface back with safer Settings
Removed MSM_Hotplug (Bricked as default)
Latest CM kernel+Ramdisk
20151224 - Grab It Here!
New splash logo. From ak
Zen decision
GPU oc from boeffla kernel
AK commits
Ukm for my kernel under progress
Reverted to franco control.. More stable wid clear noise
Removed intelli thermal which caused reboots
Added Zen decision
Added IntelliPlug v5.0
Sweep2sleep feature
Lower freq for limiter not working with Ukm. Will fix it
Removed charge level for regular charger. ( Damaging ports)
20151218 RC1 - Grab It Here!
CPU OC fixed - OC upto 2.88 ghz
Adreno Idler
Faux Sound Control
Bricked Hotplug (Default Hotplug)
Remove Zen Decision
Removed Mako Hotplug
many Governers
Msm Limiter Fixes
KSM Optimized
Thermal Conflicts Fixed
Power-Efficient Worques
Sweep2Wake
Charge Level Interface
Removed Intelli_Plug (None to do with these High End Hotplugs)
Used Optimized Toolchain
Used Latest Commits+Ramdisk Of CM13 Nightlies
20151216 - Grab It Here!
Compiler Optimizations
Ftrace Optimizations
Clockchips/Time-Tick Optimizations
CpuIdle Optimizations
Zram Support
20151215 - Grab It Here
Sultanxda Camera optimizations (better photos plus snapdragon camera support)
Arm Optimizations
Headset Volume Control Problem Solved
20151214 - Grab It Here!
Thermal Conflicts Fixed
Added Sultanxda's Thermal Driver
20151210 - Link : Grab it Here!
Kernel now A zipfile. Free to flash it with any recovery
Updated to latest Ramdisk
Cm New commits
UKM integrated into the Original Zip file
20151209 - Grab it here!
Added compatibility for 6.0.1
Fixed random reboots
20151207 - Get it here!
msm sleeper
WiFi optimization
Stereo call recorder support
O3 optimization and more
A15 and irq optimizations.
20151129 - Grab It Here!
Added Intelli_Plug Driver
Added Mako Hotplug Driver
Fast USB Charge
exFat Support
Dynamic Fsync By faux
Added BioShock Governer
MSM Limiter
ZZmove, Impulse, Smartmax, Yankactive Governers
Frandom Driver
20151126 Go Here
Deadline, Conservative Mods
Krait Configs and mods
state notifier driver
CPU Tweaks
GPU simple OnDemand fixed
Simple GPU Algorithm (faux123)
Camera Tweaks(Supressive logging ecc ecc)
20161125 Initial Release - : Grab It Here!
Nightlies
20160310 - Nightly -Grab It Here!
Sched COmmits
Futexes optimizations
fs buffer size increase
CM bluetooth configs
20160308 - Nightly - Grab It Here!
Bluetooth Wakelock and Hand bUG FIXED
Inline with latest cm branch of 07/03
Sched Wakeup Fix
20160307- Nightly Grab It Here!
Initial Kernel RC with all features as it is
See commits for more details(Git will be updated soon too)
Got this mate! Report for 24 hours!
Nakki try karen ha kernel all the best mitra.
Translation - will try this kernel for sure.
Rahulrulez said:
Nakki try karen ha kernel all the best mitra.
Translation - will try this kernel for sure.
Click to expand...
Click to collapse
Thanks a lot for your Appreciation guys, New Build Is up today. Changes made are
Deadline, Conservative Mods
Krait Configs and mods
state notifier driver
CPU Tweaks
GPU simple OnDemand fixed
Simple GPU Algorithm (faux123)
Camera Tweaks(Supressive logging ecc ecc)
i had given a try on OC to 2.88 ghz. but unfortunately i wasnt. I tried AK commits as well as Lord Commits. see my git commits. But unfortunately no OC. If anyone can figure the problem, please let me know.. Thanks
Regards
Andy
New Update UP!
Changelog :
Added Intelli_Plug Driver
Added Mako Hotplug Driver
Fast USB Charge
exFat Support
Dynamic Fsync By faux
Added BioShock Governer
MSM Limiter
SmartMax, Impulse, Smartmax, Yankactive Governers
Frandom Driver
Downloads, Go to 3rd post
Thanks
Regards
Andy
@Andy1911 thanks for the kernel
@Andy1911 here's a little suggestion. Add in zzmove governor and don't forget to add in zzmove profiles by @ZaneZam and it'll be awesome!
Another thing I will like you to take note is that although supporting CM can be the easiest but CM nightlies has been so buggy lately (unlike the past which tends to be no different than snapshot/milestone) and thus you never know when your kernel might suddenly not boot after merging in the new CM codes. Thus my suggestion is to adopt Omni's based as they tend to be more stable and there's a lot of Omni based ROM but 1 custom kernel. Or be a AOSP kernel which supports ROM like AOSParadox. Lastly, be a CAF kernel that supports a lot of ROM as most of the ROM now although based off CM as their base, they have hopped on to the CAF wagon which is more stable and gives slightly better battery life than CM
Bobbi lim said:
@Andy1911 here's a little suggestion. Add in zzmove governor and don't forget to add in zzmove profiles by @ZaneZam and it'll be awesome!
Another thing I will like you to take note is that although supporting CM can be the easiest but CM nightlies has been so buggy lately (unlike the past which tends to be no different than snapshot/milestone) and thus you never know when your kernel might suddenly not boot after merging in the new CM codes. Thus my suggestion is to adopt Omni's based as they tend to be more stable and there's a lot of Omni based ROM but 1 custom kernel. Or be a AOSP kernel which supports ROM like AOSParadox. Lastly, be a CAF kernel that supports a lot of ROM as most of the ROM now although based off CM as their base, they have hopped on to the CAF wagon which is more stable and gives slightly better battery life than CM
Click to expand...
Click to collapse
Sure,
I will merge CAF sources, or build another Kernel based on CAF. Thanks for your suggestion... But most of the users use CM and not omni, that was the reason i was not woring for omni.
UPDATE : UBERTC will be merged in upcoming build
Regards
Andy
Andy1911 said:
Sure,
I will merge CAF sources, or build another Kernel based on CAF. Thanks for your suggestion... But most of the users use CM and not omni, that was the reason i was not woring for omni.
UPDATE : UBERTC will be merged in upcoming build
Regards
Andy
Click to expand...
Click to collapse
Build one based off CAF and Omni because they're more stable and most people will stay clear of CM due to how buggy they're slowly becoming.
[deleted]
hey. first welcome to opo development. im glad we have a new kernel here.
Second:THIS IS JUST MY OPINION. i d prefer a more simple kernel than the way it seems you re following.
we have 3 or maybe 4 kernels right now that include multiple hotplugs, TONS of features . Synapse and everything you can imagine. and dont get me wrong its good thing to have features. but i think that if you want your kernel to stand out i d try to build a stable optimized kernel. Choose your favorite hotplug your favorites governors. Tune them. and make a simply kernel with great performance and a more down the hood changes.
Its not a great example but i d try to fill the void that Franco Kernel left( yeah i know its apparently not dead and franco says he is gonna update, but still that development is more or less dead).
Like a Boeffla kernel but using different hotplug and different aproaches.
Then again that its just my opinion.
sorry for my bad english
---------- Post added at 03:42 PM ---------- Previous post was at 03:24 PM ----------
you know what . its your kernel, . im gonna get back on android development(just apps this days)( i was building a rom for the g2 last year) . im gonna build my own kernel. so ty for the inspiration men.
Raagh said:
hey. first welcome to opo development. im glad we have a new kernel here.
Second:THIS IS JUST MY OPINION. i d prefer a more simple kernel than the way it seems you re following.
we have 3 or maybe 4 kernels right now that include multiple hotplugs, TONS of features . Synapse and everything you can imagine. and dont get me wrong its good thing to have features. but i think that if you want your kernel to stand out i d try to build a stable optimized kernel. Choose your favorite hotplug your favorites governors. Tune them. and make a simply kernel with great performance and a more down the hood changes.
Its not a great example but i d try to fill the void that Franco Kernel left( yeah i know its apparently not dead and franco says he is gonna update, but still that development is more or less dead).
Like a Boeffla kernel but using different hotplug and different aproaches.
Then again that its just my opinion.
sorry for my bad english
---------- Post added at 03:42 PM ---------- Previous post was at 03:24 PM ----------
you know what . its your kernel, . im gonna get back on android development(just apps this days)( i was building a rom for the g2 last year) . im gonna build my own kernel. so ty for the inspiration men.
Click to expand...
Click to collapse
I totally agree with you. But some people are currently been there who require different features. It cannot be the thing where a single feature is required for all the members. And in case of governers and Hotplugs, totally agree with you. We need a single optimized one. I already have included bioshock and msm hotplug(special edition) in my build. And optimizations, a Ton of them will come in new build tonight... Really thanks fr suggesting me... . But some features like sound control, fastcharge, voltage control, msm limiter, etc are needed. Actually planning to configure hotplug myself. If it goes fine upcoming builds will my own modded hotplug. So wish me atb. And actually my aim was to make a kernel with optimization and lot of mods like AK. So I was planning to build one like AK.
Regards
ANDY
[deleted]
Andy1911 said:
I totally agree with you
. But some people are currently been there who require different features. It cannot be the thing where a single feature is required for all the members. And in case of governers and Hotplugs, totally agree with you. We need a single optimized one. I already have included bioshock and msm hotplug(special edition) in my build. And optimizations, a Ton of them will come in new build tonight... Really thanks fr suggesting me... . But some features like sound control, fastcharge, voltage control, msm limiter, etc are needed. Actually planning to configure hotplug myself. If it goes fine upcoming builds will my own modded hotplug. So wish me atb. And actually my aim was to make a kernel with optimization and lot of mods like AK. So I was planning to build one like AK.
Regards
ANDY
Click to expand...
Click to collapse
Hey!
Welcome to the Dev side of things. I am just dropping a line to say that if you need any help, feel free to shoot me a message. I started out as a regular user and learned from others. I like to pay it forward and return the gesture. So let me know if I can help. Its nice to get other viewpoints and different projects on XDA. It makes us Devs stride to do better to stand out!
Kind Regards,
Zachariah
RenderBroken said:
Hey!
Welcome to the Dev side of things. I am just dropping a line to say that if you need any help, feel free to shoot me a message. I started out as a regular user and learned from others. I like to pay it forward and return the gesture. So let me know if I can help. Its nice to get other viewpoints and different projects on XDA. It makes us Devs stride to do better to stand out!
Kind Regards,
Zachariah
Click to expand...
Click to collapse
Thanks A Lot for your Support. I surely Require Help I will PM you about the issues I have been facing
Thanks
Regards
Andy
@Andy1911
Is this a Marshmallow kernel? Lollipop? Your OP doesn't make any mention of which Android version it's compatible with.
[deleted]
0xE2 said:
"Based on CM13 branch" -> 6.0
Click to expand...
Click to collapse
Ugh, can't believe I couldn't see that huge text. Thanks.
On that note...
Added to OnePlus One index thread:
[INDEX] OnePlus One
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.*/
Code:
If you have anything against me, my projects, this project hurts you,
you don't like this project or you are here just to insult me change thread
because you aren't welcome here.
I won't answer at the useless, spam and flame comments and I will report
them. If you want to troll or ruin a thread this isn't the right one.
Hello Guys, today I'm here with my new and I think the first real Custom Kernel for the Zuk z2/z2 plus.
DarkMoon
Features
Here are the major features of the kernel (feel free to explore Github)
Upstream Linux versions 3.18.31-3.18.58
Upstream patches from CAF (LA.UM.5.5.r1-04900-8x96.0)
Support for overclocking to 2419MHz on big and 1766MHz on little (stock values by default)
Support for the GPU overclocking to 652MHz (stock frequencies as default)
Simple_ondemand set as default GPU governor
CPU governors: interactive, conservative, ondemand, userspace, powersave, performance
Touchboost disabled by default
KCAL color control
Zram
I/O schedulers: bfq, cfq, fiops, maple and noop
Wakelock controls: sensor_ind, Ipa, Netlink, Timerfd, Wlan, Qcom rx, Wlan extscan (all disabled as default)
Vibration Strength percentage control
Fsync
Arch Power
CRC control
Gentle Fair Sleepers control
Power suspend mode: Autosleep, Userspace, LCD Panel, Hybrid (default)
Fingerprint sensor speeded up
TCP algorithms: cubic, highspeed, dctcp, hybia, illinois, lp, reno, scalable, vegas, veno, westwood (default)
F2FS support (latest from here)
Compiled with a Linaro 7.1.1 toolchain built with @The Flash 's script (located here).
Makefile optimizations (check it here)
Graphite
Hides bootloader unlock from SafetyNet (can still fail through other means)
Spectrum Support
Custom Ramdisk
Stock Kernel backup (if you want to restore the stock kernel you just need to flash the zip located here)
Flashed with AnyKernel2 (thanks to @osm0sis)
Downloads:
Current Release (004.1): Download here
Current Release Longtap: Download here
Other Releases:
https://www.androidfilehost.com/?w=files&flid=167771
Don't mirror my builds
Changelogs:
Release 002: Here
Release 003: Here
Release 004:
Kernel completely rebased on the latest caf tag available at the moment (LA.UM.5.5.r1-04300-8x96.0) and then updated to the LA.UM.5.5.r1-04900-8x96.0
Kernel upstreamed to the 3.18.58
Some governors removed (really not even added)
Removed Adreno Idler (we don't need it)
Added some optimizations from the AOSPA op3 kernel
Upstreamed F2FS
Upstreamed SDCARDFS (but the device tree need the support for it)
Overclocked CPU and GPU
Added the spectrum support
Added an abort script for some roms
Check the sources for the rest, I can't remember all
Release 004.1:
Fixed a typo in the ramdisk that bugged the GPU frequency change with the spectrum profiles (thanks to AnjoVingador that reported this problem)
Installation Instructions:
Your bootloader must be unlocked
Download the kernel and flash it in the
twrp and wipe cache and dalvik/art cache if you're doing a dirty flash
If you're doing a clean flash flash ROM, gapps, SuperSU and then the kernel
Current Version Informations:
DarkMoon Kernel Version: Release 004
Linux Kernel Version: 3.18.58
GCC Version: Linaro 7.1.1
Current CAF Tag: LA.UM.5.5.r1-04900-8x96.0
Source Code:
https://github.com/DD3Boh/android_kernel_zuk_msm8996
A thank to:
@FireLord1 [https://GitHub.com/FireLord1]
@KriiX-001 for the Kernel Logo
Fedor917 [ https://GitHub.com/cryscript ]
@davidevinavil [ https://GitHub.Com/Davidevinavil ]
@varotone [ https://GitHub.com/ontherunvaro ]
CallMeSuper [ https://github.com/18712886438 ]
If you like my work donate me, it would be very appreciated:
Donation link:
https://PayPal.me/dd3boh
Zuk z2/z2 plus telegram international group:
https://telegram.me/ZukCustomGoodies
Enjoy
Beautiful bro
Enviado desde mi Z2 Plus mediante Tapatalk
First charge
Enviado desde mi Z2 Plus mediante Tapatalk
Finally a new kernel to play around with. Good work @DD3Boh
Test on D.U march 03/17
So far so good, no bugs from capturing image to capturing video.
For AOSP or stock ROM?
Ritik17 said:
For AOSP or stock ROM?
Click to expand...
Click to collapse
Maybe for all ROM.
I use Citrus CAF ROM, no problem.
When the next version will be released?
Is possible to use the file "zImage" inside DarkMoon-Kernel-z2_plus-Release-002.zip and use
Code:
fastboot flash boot zImage
to flash kernel instead of use TWRP Install method?
Thanks
oh, OC clocks were removed I liked hitting 160k on antutu just for fun haha
SiRiusCb said:
Is possible to use the file "zImage" inside DarkMoon-Kernel-z2_plus-Release-002.zip and use
to flash kernel instead of use TWRP Install method?
Thanks
Click to expand...
Click to collapse
Yes it's possible but I don't suggest that because probably you will have broken wlan. If you want you can try
ar_15 said:
oh, OC clocks were removed I liked hitting 160k on antutu just for fun haha
Click to expand...
Click to collapse
Ahahahah
Anyway I removed them because already weren't working. Maybe I'll add them another time in the future but the problem is to make them working without set them as default. Setting an overclock value as default is something that I don't want to do
Ritik17 said:
For AOSP or stock ROM?
Click to expand...
Click to collapse
Technically for all the custom ROMs nougat, then I heard some people that said it works on the marshmallow ROMs and on the stock ROMs too. I only can grant for the custom ROMs (it seems not the Jaguar... Lol) so I don't know about the zui. If you want to try and then tell us it will be very appreciated.
tlxxxsracer said:
BATTERY:
USB Fast charge (when connected to a USB port)??
When charging isnt it always connected to a usb port...? Any extra heating?
Click to expand...
Click to collapse
I didn't know how to say that. When connected to a USB port of a computer or something like that is the meaning. I haven't hearing issues, others have. I'll try to fix these completely with the next release. I hope you will like the kernel
Does it has any impact in the battery life of the phone ? If so its better or worse ?
DD3Boh said:
Technically for all the custom ROMs nougat, then I heard some people that said it works on the marshmallow ROMs and on the stock ROMs too. I only can grant for the custom ROMs (it seems not the Jaguar... Lol) so I don't know about the zui. If you want to try and then tell us it will be very appreciated.
Click to expand...
Click to collapse
I'm not really a stock rom guy, I always prefer custom rom. I was only confirming whether is it for stock or custom cause I didn't wanted to go through making nandroid backup and etc. I did try the kernel and I liked it, nice work.
Arul Stark said:
Does it has any impact in the battery life of the phone ? If so its better or worse ?
Click to expand...
Click to collapse
No, no impacts at the battery life, just the charging speed changes. It can't damage the battery because with a normally charge it still charge faster
Hey DD3Boh, a bit offtopic since I didn't find the specific thread, but are you still updating Darkness Redefined or now you're only developing this Kernel and Citrus? I saw some people asking about it on zukfans's thread but you seem to be more active here lately.
ar_15 said:
Hey DD3Boh, a bit offtopic since I didn't find the specific thread, but are you still updating Darkness Redefined or now you're only developing this Kernel and Citrus? I saw some people asking about it on zukfans's thread but you seem to be more active here lately.
Click to expand...
Click to collapse
I'm more active there because I won't publish on zukfans anymore. For now there is only the zukfans thread for the DND, with the next update I'll post it here too. I still develop it.
DD3Boh said:
Hello Guys, today I'm here with my new and I think the first real Custom Kernel for the Zuk z2/z2 plus.
DarkMoon
Features:
CPU:
Governors:
zzmoove
blu active
chill
elemental X
impulse
nebula
interactive
conservative
ondemand
userspace
powersave
bioshock
performance
Tuch Boost switch
GPU:
Governors:
spdm bw hyp
cache hwmom
mem latency
bw hwmon
msm vidc vmem+
msm vidc vmem
msm vidc ddr
bw vbif
gpubw mon
msm adreno tz
cpufreq
userspace
powersave
performance
simple ondemand
Adreno Idler:
An efficient workaround for msm adreno tz's overheads by Arter97
THERMAL:
Intellithermal:
An in-kernel replacement for Qualcomm's Thermald by faux123
SCREEN:
Screen's Colors editing
Saturation Intensity
Minimum RGB Value
Grayscale Mode switch
Sreen Hue
Screen Value
Screen Contrast
BATTERY:
USB Fast charge (when connected to a USB port)
MISC:
Vibration Strength
Wakelocks switches:
sendor_ind Wakelock
msm_hsic_host Wakelock
wlan_rx Wakelock
wlan_ctrl Wakelock
wlan Wakelock
BlueSleep Wakelock
INFO:
Linux Kernel version: 3.18.48
DarkMoon Kernel Release: Release 002
GCC: Uber TC 6.x
DOWNLOADS:
Release 001: https://www.androidfilehost.com/?fid=529152257862716201
Release 002:
https://www.androidfilehost.com/?fid=457095661767152450
Changelog Release 002:
https://www.androidfilehost.com/?fid=673368273298945966
SOURCE CODE:
https://github.com/DD3Boh/android_kernel_zuk_msm8996
CONTRIBUTORS:
@miju12 [https://github.com/miju12]
A thank to:
@FireLord1 [https://GitHub.com/FireLord1]
Fedor917 [ https://GitHub.com/cryscript ]
@davidevinavil [ https://GitHub.Com/Davidevinavil ]
@varotone [ https://GitHub.com/ontherunvaro ]
If you like my work donate me, it will be very appreciated:
Donation link: https://PayPal.me/dd3boh
Zuk z2/z2 plus telegram international group: https://telegram.me/ZukCustomGoodies
Enjoy
Click to expand...
Click to collapse
A new update is out. The Release 002. Really it was already out on zukfans but I didn't updated the thread here. Now I'll publish only on XDA so the next update will be always there
READ ALL BEFORE ANYTHING!
ATTENTION
Code:
/*
I'm not (yet) a developer , I'm taking effort to put more choices of kernel for our great community.
This kernel is tweaked for best balance possible, if you want a feature quote me and i will see what i can do,
I will build this kernel when possible on my free time and because of it is a nightly and I will use this thread as a worklog too.
Thank you for using this kernel.
*/
Disclaimer
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Adapt, improve and evolve!
Info:
Guys I created this kernel to Moto G 2013 (Falcon/Peregrine) and Moto G 2014 (Titan/Thea) in other words MSM8226 Motorola SoC baseds to learn, adapt some "unstable and unsafe" things as well to give a new life to my device, the plan is to support all Android versions avaliable for our device, I plan to do a better kernel with time and help of the comunity. This kernel is a nightly I will do it when I have a freetime or LineageOS update their sources or I add new features, it aims to be a rich feature kernel and a "perfection balance" between battery life and performance, this can be a UNSTABLE kernel, my routine will be build,upload and test, so stay tuned! I am open to suggestions. This is a kernel that don't work out-of-the-box the objetive of this kernel is give power to the user.
This kernel DO NOT WORK WITH STOCK MOTOROLA/GOOGLE PLAY EDITION ROM or IDCRISIS or AOSPARADOX.
On post 1:
#1 - Features and installation instructions
#2 - Downloads and kernel Source
#3 - Buglist and to do's
On post 2:
#1 - Changelog
Features (By now and latest one):
Based on 3.4.113 LTS Linux kernel and latest LOS/AOSP/CM/Motorola sources
Kexec hardboot patch (MultiROM support)
Governors: Interactive,Ondemand,Performance,Userspace,Conservative,Powersave
Hotplugs: AutoSMP and Alucard Hotplug
Overclocks and Underclocks (Attention this can be dangerous to your device! you have been warned!):
Overclocked CPU (up to 1.6Ghz),Overclocked GPU (up to 600Mhz) Overclocked RAM and Overclocked Slimbus for better audio
Intellithermal v2 to protect our device from heating
Sound: High performance Headset,Low latency playback Support,24 bits Playback Support,Enabled additional Moto G Exclusive Audio Channels TPA-a6165a2
Screen: DT2W and S2W/S2S, KCAL
GPU:Simple GPU Algorithm and AdrenoIdler
Misc: Init.d support, Fsync on/off, ARCH_Power, Gentle Fair Sleepers, Toggle for some wakelocks, Stereo Call Recording Support, Reclaim RAM from loggers, Powersuspend, State Notifier .
For full features list check my github.
Compiled with Arch Linux up-to-date and UBER Toolchain 4.9 and optimize flags[/COLOR]
Bootlogos
PREVIEWS ONLY CHECK DOWNLOADS SECTION FOR LINKS
Created by me and the others two by @Mattwmaster58:
Silver
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Blue
Red
Downloads
(Folder on AFH) (Please DO NOT MIRROR, if one is down just post in the thread or pm me and i will repair!):
Cyanogenmod/AOSP for Falcon:
CM14.1 (UNIFIED WITH CM13 BY NOW) - CM14.1
CM12.1 - CM12.1
CM11 - NOT YET
Cyanogenmod/AOSP for Peregrine:
CM14.1 (UNIFIED WITH CM13 BY NOW) - CM14.1
CM12.1 - CM12.1
CM11 - NOT YET
Cyanogenmod/AOSP for Titan/Thean (Same defconfig):
CM14.1 (UNIFIED WITH CM13 BY NOW) - CM14.1
CM12.1 - CM12.1
CM11 - NOT YET
NOTE:ALWAYS CHECK LAST PAGES TO SEE WHAT IS GOING ON!!!
LSpeed Profiles (OLD! LSpeed envolved too fast!) - Balance
Bootlogos: ZER0 Byte Bootlogo
Old releases of ZER0 and ZER0 Byte (Reborn) Kernel : AFH
Mirror: Github mirror and how to download
How to install
If you're on other kernel please at least DIRTY FLASH you ROM, thanks.
The kernel:
By recovery:
Using TWRP (Please use the latest one)
1. Put the zip at /sdcard > Reboot to recovery > Install > Chose the kernel zip > Confirm to flash > (optional) Wipe caches > Reboot.
or
By app:
2. Flash it using Flashify or similar app from Playstore.
The kernel scripts backup your current boot.img so if you want to restore just use Flashify or TWRP.
The Bootlogo:
Using TWRP (Please use the latest one)
1. Reboot to recovery > Install > Chose the bootlogo zip > Confirm to flash > Reboot and enjoy.
2. Flash it using Flashify or similar app from Playstore.
3. Extract the zip and on mfastboot (or just fastboot) enter this command: fastboot flash logo logo.bin
Recommendations/Tweaking
Gov Tuner a mod to tune govs based on profiles for better battery life, better performance, or a balance., I have added a lot of sound patchs but A.R.I.S.E. will blow your mind! so if you want a better sound on your Moto G I suggest you A.R.I.S.E the best one in my opinion or just Viper+Dolby. And the best of the best tweaks app LSpeed just download and select a profile from main screen and fell it! or tune it by yourself!
To tweak use Kernel Adiutor from Playstore (or XDA Link), the Kernel Adiutor-Mod (fork with more experimental features) at XDA or Synapse You will need this zip and download Synapse app from Playstore.
Info about tweaking kernel The best guide to it!
Better RAM management for FALCON/PEREGRINE/TITAN/THEA thanks to @Pupet_Master
-Download "Kernel Auditor" from the "Play Store" and open it
-Once inside, Swipe from left to right to show the side menu.
-Tap on "Low Memory Killer"
-Change to these custom settings:
Code:
Foreground Applications: 29mb
Visible applications: 61mb
Secondary Server: 157mb
Hidden Applications 227mb
Content Providers: 87mb
Empty Applications 191mb
-Swipe from left to right again and tap at the option "Virtual Memory"
-Change those settings from there:
Code:
dirty_ratio: 20
dirty_background_ratio: 5
dirty_expire_centisecs: 100
dirty_writeback_centisecs: 300
min_free_kbytes: 4096
oom_kill_allocating_task: 1
overcommit_ratio: 100
swappiness: 100
vsf_cache_pressure: 53
laptop_mode: 0
extra_free_kbytes: 24576
Z-RAM Disksize: 470mb
-Swipe from left to right again and tap at the "Profile" section
-Click at the "+" button and save the current settings on a new profile
-Holdon the new profile and choose the option "apply on boot"[/QUOTE]
This kernel does not ships with a default config, so here it is how to config (an example) a profile for battery/balance/performance:
Battery
Code:
On CPU
CPU Gov - Interactive
Max freq. - 1190Mhz or 1094Mhz
Multicore power save - Aggressive
Alucard Hotplug - ON
On GPU
GPU max freq. - 450Mhz or 320Mhz (if dont play use 320Mhz)
GPU Gov - simple_ondemand or msm_adreno_tz with tweaked adreno idler
On I/O Scheduler
Scheduler - ROW or SIO
-
Balance
Code:
On CPU
CPU Gov - Interactive
Max freq. - 1190Mhz
Multicore power save - Enabled
AutoSMP - ON
On GPU
GPU max freq. - 450Mhz
GPU Gov - msm-adreno-tz
On I/O Scheduler
Scheduler - ROW or ZEN
-
Performance
Code:
On CPU
CPU Gov - Interactive
Max freq. - 1593Mhz
Multicore power save - Disabled
AutoSMP - ON
On GPU
GPU max freq. - 600Mhz
GPU Gov - msm-adreno-tz
On I/O Scheduler
Scheduler - ZEN
Note about some features
Display types WORKING with DT2W/S2S/S2W:
mdss_dsi_mot_inx_720p_video_v0 (TITAN/THEA)
mdss_dsi_mot_cmi_720p_video_v2 (FALCON/PEREGRINE)
Display types NOT WORKING with DT2W/S2S/S2W:
mdss_dsi_mot_jdi_720p_video_v1 (TITAN/THEA)
mdss_dsi_mot_jdi_720p_video_v0 (TITAN/THEA)
mdss_dsi_mot_lgd_720p_video_v0 (FALCON/PEREGRINE)
If you don't have a working DT2W/S2S/S2W or don't like it you can disable it and/or use AcDisplay app or Anbient Display of your ROM instead.
To check which display type you have by going into terminal and type:
su
cat /proc/cmdline
Bugs
None by now, if you encounter one please make a post in this thread with steps to reproduce and if possible a LOGCAT and DMESG. A simple how to help me debug.
To do
Undervolt and Userspace Voltage Controller
OC of 1.8Ghz
More Hotplugs
More Govs
More I/O's (SIOplus,FIFO)
Added all features to all variants
Vibrator Intensity Control
Ram Underclock
Sched & Mutex Tweaks
Stock and GPE variants
WQ_POWER_EFFICIENT
LZO Compression image (Fast boot)
DOLBY_DAP dependency fix
Frandom
Filesystems support:
NTFS Support / EXT 2/3/4 support / F2FS (Most roms only support it at /data)
Optimized ARM RWSEM algorithm
Silence some logs
NEON in kernel mode
Misc Crypt tweaks
LMK tweaks and adaptive
More Security Patchs
Yankactive (Cause reboot at the moment),Yankdemand,Smartmax,Lionhert,Impulse,DanceDance,Bioshock
I/O's: ROW,NOOP,Deadline,CFQ,FIOPS,BFQ,SIO,VR,ZEN
All avaliable TCPs congestions on Android
How to git and build
Setting up and building
Basics of GIT
- How to build my kernel:
Code:
export ARCH=arm
export SUBARCH=arm
export CROSS_COMPILE=/path/to/toolchain/bin/arm-eabi-
make mrproper (cleans config files)
make clean (cleans already builded files)
make falcon_defconfig (or you device_defconfig)
make menuconfig (if you want to tweak the config)
make (I use this too -o2 -j4 CONFIG_DEBUG_SECTION_MISMATCH=y CONFIG_NO_ERROR_ON_MISMATCH=y)
How to cherry pick commits
Basically to cherry pick a commit you have to have it source and branch, this is a simple how to do it
First of all you need to set your upstream since it is a fork of CM/LOS or STOCK source:
Code:
git remote add upstream linkingithub.git
For example
Code:
git remote add upstream https://github.com/CyanogenMod/android_kernel_motorola_msm8226.git
so if you want to cherry pick a commit from me
Code:
git remote add bryanbytez mysourcelink.git
and after that you need to have my source locally but stay calm this wont mess you source
Code:
git fetch -all
To merge upstream changes (From CM/LOS or Motorola)
Code:
git merge upstream/cm-13.0
This will merge upstream cm branch cm-13.0 in your source code.
Misc help:
http://forum.xda-developers.com/showthread.php?t=2319018 (about boot.img, ramdisk and others)
https://stackoverflow.com/questions/2816715/branch-from-a-previous-commit-using-git (Unlike me you can just revert or create another branch based on the commit and not delete the whole source code )
https://stackoverflow.com/questions/4410091/github-import-upstream-branch-into-fork (Import a upstream branch on your fork)
And to revert a git: git revert sha1, example git revert eab5c8fef098548f0f00085196bbf40f41bf8ba1
Source/Credits
If you want to post this on your site or other forum it's okay just post a link to this thread too and the correct credits and if you can, pm me with link so i can see it too, thanks.
The GNU General Public License is a free, copyleft license for software and other kinds of works.
The GPL permits use, share, study and modify.
But this does not mean you should not give the deserved credit to the previous author.
So if you use my source code under GPL you must share with GPL too and quote me in the credits.
CM/LOS/AOSP Based Source
Stock/GPE Based Source
Thanks to:
GOD
The Real Dev's:
Motorola/Lenovo
LineageOS/CyanogenMod/AOSP/CAF Teams
A special thank you to @Kamin4ri to be answering questions from a noob
@hurtsky @pinkflozd @zakee94 @TeamMex (not a team ) @RenderBroken @alin.p @Flashhhh @Shivam Kuchhal @RolanDroid @attack11 @DC07 @frap129 @-decipher- @bedalus @MetalPhoenix45 @srisurya95 @para94 @chijure @Aayushya @neonkat and @faux123 for inspiration and commits (i guess that everyone that i pick a single commit is here... since i don't know yet to pick commits (picking commits automatically add the credits) a big thanks to all !)
@kwoktopus, for the tutorial how to build
And you the user!
If I forget someone please contact me and I will add here! [/FONT]
XDA:DevDB Information
[Kernel][GPL][K-N][Titan][UBER TC]ZER0 Byte Kernel[Nightlys][CM/AOSP], Kernel for the Moto G 2014
Contributors
BryanByteZ
Source Code: https://github.com/BryanByteZero/android_kernel_motorola_msm8226
Kernel Special Features: OC/UC/DT2W/S2W/S2S/Sound Patchs and a lot more, check it!
Version Information
Status: Nightly
Current Stable Version: R3
Stable Release Date: 2017-02-22
Current Beta Version: R4
Beta Release Date: 2017-04-29
Created 2017-04-30
Last Updated 2017-05-01
Changelogs for CM/LOS/AOSP K/L/M/N
Changelogs for CM/AOSP K/L/M/N:
For Falcon and Peregrine
19/11/2016
No more MPDecision and CM PowerHAL
DT2W and S2W/S2S
Optimization Flags
Overclock and Underclock
Alucard Hotplug
AutoSMP Hotplug
Faux Sound 3.5
KCAL v2
High performance and low latency audio headset
KEXEC Hardboot patch
04/02/2017
Up-to-date with LOS source and Linux (now it's 3.4.113 the LTS version)
Intelliplug, AutoSMP and Alucard Hotplugs
Intellithermal
MSM-Limiter (you will need KernelAdiutor-MOD to use this feature)
Toggles for some wakelocks
ARCH_power
Gentle fair sleepers
Stereo call recording support
Reclaim RAM from loggers
Dynamic management of dirty page writebacks, expire and cache pressure
Some GPU patchs
SIO,VR,ZEN and Tripndroid I/O's
Powersuspend, LCD notify and state notifier
Dynamic FSYNC
CPU, GPU and RAM overclock
Simple GPU algorithm and AdrenoIdler
Enhanced audio with Faux Sound and low latency drivers and high performance mode
KCAL
KEXEC Hardboot patch
DT2W/S2S/S2W
Make optimizations
Powered by UBER STOCK Toolchain 4
22/04/2017
LATEST SOURCES
CPU OC/UC
GPU OC/UC
CPU boost
KCAL
faux Sound
High perf headset mode
OC RAM and slimbus
Intellithermal
Simple GPU Algorithm and AdrenoIdler
State notifier and Powersuspend
Alucard and AutoSMP hotplugs
Stereo call recording
Custom I/O's
Stock GOVS
KEXEC Hardboot patch
wakelock blocks
Fsync on/off
Power efficient workqueue
29/4/2017
DT2W/S2S/S2W
Bugs:
None by now,if you encounter one please make a post in this thread with steps to reproduce and if possible a LOGCAT and DMESG.
Reserved
Reserved
DT2W doesn't work, my phone is compatibile as in older kernels it worked
Just installed it on Titan, Ressurrection Remix. 1.6 ghz !!!
Zenzfum000 said:
DT2W doesn't work, my phone is compatibile as in older kernels it worked
Click to expand...
Click to collapse
Did you enabled on KA? It give some error? Which kernel DT2W worked? Which is you display? check note section in OP, please. I used the same "formula" for falcon,peregrine and titan/thea but maybe this last need some special atention.
Thanks.
BryanByteZ said:
Did you enabled on KA? It give some error? Which kernel DT2W worked? Which is you display? check note section in OP, please. I used the same "formula" for falcon,peregrine and titan/thea but maybe this last need some special atention.
Thanks.
Click to expand...
Click to collapse
I've used ex kernel manager, i don't think the problem is on the software side. In marshmallow kernel dt2w worked, is not a fault of yours, i think is nougat
In devolution kernel is not working too
When i try to unlock screen i had a soft reboot
Zenzfum000 said:
I've used ex kernel manager, i don't think the problem is on the software side. In marshmallow kernel dt2w worked, is not a fault of yours, i think is nougat
In devolution kernel is not working too
When i try to unlock screen i had a soft reboot
Click to expand...
Click to collapse
Well sound like that is not supported, in MM you used evolution kernel? Can you grab the output of cat /proc/cmdline in terminal? Thanks!
Sent from my Xiaomi Redmi 4A using XDA Labs
BryanByteZ said:
Well sound like that is not supported, in MM you used evolution kernel? Can you grab the output of cat /proc/cmdline in terminal? Thanks!
Click to expand...
Click to collapse
I'm not a beginner, i know what i'm saying
Dt2w has problems on nougat kernels
Sent from my Moto G 2014 using XDA Labs
Zenzfum000 said:
I'm not a beginner, i know what i'm saying
Dt2w has problems on nougat kernels
Click to expand...
Click to collapse
I'm just asking because I don't own a Titan/Thea/Peregrine but since it have the same SoC same features should work in all.
BTW you can test in a MM?
Sent from my Xiaomi Redmi 4A using XDA Labs
BryanByteZ said:
I'm just asking because I don't own a Titan/Thea/Peregrine but since it have the same SoC same features should work in all.
BTW you can test in a MM?
Click to expand...
Click to collapse
Not now but i think it will don't work on mm too
Sent from my Moto G 2014 using XDA Labs
Zenzfum000 said:
Not now but i think it will don't work on mm too
Click to expand...
Click to collapse
So basically any kernel that have DT2W is not working on N right?
Can you grab me a dmsg and lastkmsg? Maybe I can debug it.
Thanks!
Sent from my Xiaomi Redmi 4A using XDA Labs
BryanByteZ said:
So basically any kernel that have DT2W is not working on N right?
Can you grab me a dmsg and lastkmsg? Maybe I can debug it.
Thanks!
Click to expand...
Click to collapse
Ok, i'll try
Sent from my Moto G 2014 using XDA Labs
Here you are the logs @BryanByteZ
Zenzfum000 said:
Here you are the logs @BryanByteZ
Click to expand...
Click to collapse
Can you say something about the general performance and stability? Does CPU overclocking work without overheating or other issues?
Sent from my Moto G 2014 using XDA Labs
Here You are thanks for working on titan too!
I'm on RR MM at the moment, when trying dt2w/s2w my phone reboots.
Wolfcity said:
Can you say something about the general performance and stability? Does CPU overclocking work without overheating or other issues?
Click to expand...
Click to collapse
General performance is great, i'm using interactive with alucard at maximum 1401mhz, never faced overheating issues :good:
Sent from my Moto G 2014 using XDA Labs
Does OC actually work?
Other developers have tried it before, and realized it was a placebo soon after.
Kernel working great!
But one thing, if I select Dt2w/S2w from kernel auditor.. After that, the device got reboot automatically & settings are changed itself to default settings n kernel auditor..
So pls, implement/improve/repair Dt2w features..
Sent from my Moto G 2014 using Tapatalk
I use Conservative governor, no heating problems.
DT2W crashes/reboots device. I would not bother with DT2W, it just drains battery.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
#include <disclaimer.h>
* Your warranty is now void. *
* No guaranteed this'll explode your device, be careful, follow the instructions ! *
*don't point at me if your alarm dies after flashing this kernel ! *
Introduction
Hello all!
So this is Prototype™ Kernel for Lenovo Z2 Plus on which i was working.Main Purpose of the kernel is to provide balance performance to the user in daily life while giving full freedom to users to control the kernel.So this a short contribution to zuk community from my side hope you all will like it!
Thanks.
*Please read FAQ and installation instructions carefully.
Features
msm 3.18
Kernel rebased over als.
Upto date with linux stable (3.18.128)
Compiled with DTC+GCC9
Governors: Impulse, Darkness, Interactive, Conservative, Ondemand, Powersave, Userspace, Alucard, Nightmare, Chill, Blueactive
Relaxed, and Performance.
I/O Schedulers: Noop, Deadline, Cfq, ROW, Fiops, Bfq, Zen, Sio, Maple and Tripndroid.
F2FS Support
Advance TCP Congestion Control
Dynamic FSync
Boeffla WakeLock Blocker
Sound Control
Power Efficient Work Queue for major drivers and enabled by default.
commits to make cpuboost efficient
Faster app installation time
Simple GPU algorithm
PowerSuspend Drivers
Interactive and tuned for balance performance
State Notifier
Ships with Aroma installer
msm_thermal_simple instead msm_thermal
VDSO implementation
Spectrum supprt
Adreno idler
Fingerprint boost
And Much more.
msm 4.4
Rebased on linux stable tree
Current Kernel version is 4.4.168
Latest CAF tag merged is LA.UM.7.2.r1-05500-sdm660.0
Toolchain used is DTC8+GCC9
Features
EAS
Clang Support
CFQ updates from upstream
Power Efficient WQ
Brought back msm_thermal_simple instead msm_thermal
Fingerprint Boost
Boosting is done through CPU-Boost+Dynamic Schedtune Boost
UC to 1.4 and 1.9
IO schedulers available:cfq,bfq,noop,fiops,sio,zen,deadline
Fsync on/off toogle
Advance TCP Algorithms
Spectrum support
USB Fast charge
Installation instructions
First time:
Reboot to recovery
Flash Prototype kernel.zip
Reboot
Update the kernel:
Reboot to recovery
Flash Prototypekernel.zip
Reboot
Coming from another kernel:
Reboot to recovery
Dirty flash your current ROM
Flash Prototypekernel.zip
Reboot
Download
Sourceforge Folder
FAQ
1. Why the kernel zip is so large?
-> Treble Pie and Treble Oreo version of the kernel are packed in single file.You have to choose your version during installation so choose carefully.
2. How frequently it will get updated?
->Well its not fixed ,most probably it will be updated after every 15 days.But if some major bug is there then there can be quick updates.
3.Do you have any telegram release channel where we will be updated about the news about this kernel?
-> Yes we have telegram channel-https://t.me/prototypereleases
4.Can we request features?
-> Yes you can request features and ill try my best to implement it but no promise
5.I dont have any knowledge about governors and schedulers?
-> Dont worry if you dont have any knowledge just select next in aroma installer
6.Which ROMS are supported ?
-> Treble ROMS of pie and oreo are supported.Further compatibility will expand.
6.My phone heating after booting the kernel ?
-> Yes as the phone boots CPU carries out various tasks which lead to increase load on cpu and thus heating.So it is recommended that after flashing the kernel keep the phone idle for 10 mins and then see the magic
Thanks To/Credits
Code:
@amog787 (My Master)
@dmitrikudas (Helped me to boot my first kernel)
@DD3Boh (Master Dev)
@faizauthor
@davidvinavil
@frap129
@SultanXDA
@yarost
@davidevinavil
@andip71
@Kenny3fcb (Cleared Some Major Doubts)
@Cosmedd
@Flar2
@amarulz
@franciscofranco
@sanketp60 (For thread banner)
@movzx (For aroma installer)
@Pavan_Paps,@Gmp KV,@omkarmodgi and @lonelystag(For testing builds)
And all the authors of commit in my sources
[If i Forgot you by mistake please remind me]
Telegram Channel
@prototypereleases
XDA:DevDB Information
Prototype™ Kernel, Kernel for the Lenovo ZUK Z2 (Plus)
Contributors
Danish1999
Source Code: [url]https://github.com/Danish1999/msm-4.4 [/URL]
Kernel Special Features: Just Special
Version Information
Status: Stable
Current Stable Version: v4
Stable Release Date: 2018-10-29
Created 2018-10-04
Last Updated 2018-12-20
Screenshots
Reserved
Thanks for the kernel! Looking forward to flash it. Will review post few day usage
Interesting. I will try it soon. Hope it suitable with my daily use.
I have flashed it. Let us see how it performs
Sent from my z2_plus using XDA Labs
Why so slow in pubg?
takes forever to start...
Please give faster updates, that's the only hearty request.
---------- Post added at 06:23 PM ---------- Previous post was at 06:21 PM ----------
Sir, can you please add Spectrum app support,it is easy switching between profiles...... ?
Will it work for pe pie??
Pavan420 said:
Will it work for pe pie??
Click to expand...
Click to collapse
Ofcourse
Okay, initial impression.
-Charging rate is fine.
-Pubg gameplay is smooth and this is amazing that it stayed at 40°C for me. I was shocked cuz this was only possible before in Cardinal Rom. Great work dev
-Battery consumption is 13-14% per full length classic match.
- Though the phone doesn't heats as such, but the idle temps are higher than stock Arrow and Moxie ie. >36°C
I haven't done a full charge, so can't really comment in battery.
But this is Greta for initial build. Thanks for this kernel.
Finally a pie kernel. Well managed thermals undoubtedly. Although it is too early to comment. I hope battery lasts. Please move the thread to development section. Also kernel lacks hotplugs, wakelocks, and thermal controls. Also please list the work of each governors as listed on aroma on the thread for easy governor handling. One major missing is option to overclock gpu and cpu both.
PUBG not working
Super fine performance but while on pubg it's taking too long just to load (About 3 mins) then it hangs up at loading screen. I'm on AEX 5.8 rooted.
Kindly Suggest something to resolve this issue. I tried reflashing kernel but it didn't workout.
Thanks again for this Super thing.
I'll add battery backup as soon as possible.
Edit- I have checked with cpu float GPU freq. are not going up.
If this is using aroma for install, can something like ElementalX where you pick the default cpu & gpu clock speeds before installing the kernel possible? Of course setting everything after booting into rom with a kernel manager is fine, but a option to run without a manager would be appreciated
Will try this later today on ArrowOS Pie, as for features Im looking forward to overclocking, thermal and voltage control to be implemented
edit: early benchmark result, with all battery-oriented choice from aroma (darkness governor, noop i/o sched, "No" at playing games). Adreno driver v328 rev3
about the same as a snapdragon 625 according to gb. Gpu performance doesn't seems to be hobbled much
pipyakas said:
If this is using aroma for install, can something like ElementalX where you pick the default cpu & gpu clock speeds before installing the kernel possible? Of course setting everything after booting into rom with a kernel manager is fine, but a option to run without a manager would be appreciated
Will try this later today on ArrowOS Pie, as for features Im looking forward to overclocking, thermal and voltage control to be implemented
edit: early benchmark result, with all battery-oriented choice from aroma (darkness governor, noop i/o sched, "No" at playing games). Adreno driver v328 rev3
about the same as a snapdragon 625 according to gb. Gpu performance doesn't seems to be hobbled much
Click to expand...
Click to collapse
Yep that frequency selection are possible in aroma installer but I not going oc cpu.I'll think about oc gpu
Danish1999 said:
Yep that frequency selection are possible in aroma installer but I not going oc cpu.I'll think about oc gpu
Click to expand...
Click to collapse
Well with how the little cluster's missing 1.56ghz frequency I guessed that asking for cpu oc would be hard although it's obviously the main performance bottleneck and the adreno 530 on a 1080p screen is already fast enough.
Pre-baked undervolting and voltage though would make it I hope? Can predefined uv level be implemented in aroma as well?
pipyakas said:
early benchmark result, with all battery-oriented choice from aroma (darkness governor, noop i/o sched, "No" at playing games). Adreno driver v328 rev3
about the same as a snapdragon 625 according to gb. Gpu performance doesn't seems to be hobbled much
Click to expand...
Click to collapse
Its a known issue. When you upgrade GPU drivers from 2xx on z2, geekbench fails to properly benchmark the device, GPU performance isn't considered. Antutu benchmark doesn't have this issue.
after dirty flashing my rom then flashing the kernel all is going good performance is great but when i play pubg if i try to raise or lower the volume i get flashes in the background of the volume panel . i think its something related to the gpu drivers .
im on aex 6.0 latest
guyz_ahead said:
Finally a pie kernel.
Click to expand...
Click to collapse
Moxie and Nameless are there too!
ahh988 said:
after dirty flashing my rom then flashing the kernel all is going good performance is great but when i play pubg if i try to raise or lower the volume i get flashes in the background of the volume panel . i think its something related to the gpu drivers .
im on aex 6.0 latest
Click to expand...
Click to collapse
Atleast your game is starting mine is just not loading mainscreen. I'm on AEX 5.8.