Related
Hi guys!
I had rooted u9200 on ICS firmware version B100, but I didn't manage to unlock bootloader to install CWM. So I decided to flash update 4.1.1 B508 offical beta firmware. I had to change build.prop to match the B508 version and I succesfully flashed 4.1.1 update. The problem now is that I can't root it. No way, I tried everything, not a chance. Also I can't downgrade because I have to change build.prop again to match the version I'm trying to downgrade to, but since I don't have root access I can't change build.prop. So now I'm stuck on unrooted beta version of 4.1.1.
Plese if anyone has any ideas and suggestions do not hesitate to write.
Out with the old, in with the new
So, I finally menaged to root 4.1.1 and to flash cwm. So now I flashed CM10 4.2.1 and it's working fine, but... When I go to settings/storage I can see my internal memory as "Internal storage" 2.14GB and I can see my sd card as "sd card" 29.78GB, but from any file menager I tried to use the situation is different, I see my internal storage as "sd card" and my real sd card is nowhere to be found, I can't access it from anywhere. The card is working fine, I tried it on my pc, and I used it to install this CM10 I'm on now.
Anyone with similar issues?
Please help me.
Tux2609 said:
So, I finally menaged to root 4.1.1 and to flash cwm. So now I flashed CM10 4.2.1 and it's working fine, but... When I go to settings/storage I can see my internal memory as "Internal storage" 2.14GB and I can see my sd card as "sd card" 29.78GB, but from any file menager I tried to use the situation is different, I see my internal storage as "sd card" and my real sd card is nowhere to be found, I can't access it from anywhere. The card is working fine, I tried it on my pc, and I used it to install this CM10 I'm on now.
Anyone with similar issues?
Click to expand...
Click to collapse
Hi,
I have the exact same problem and have been scouring the internet for answer.
I bought my P1 in Hongkong, so had a Hongkong stock B104 firmware, i used unlockroots software to unlock it successfully, but like you did not put any recovery on it, so have no way to flash a new rom or any recovery. i also like you edited the build.prop file using root explorer and flashed B508 (Jellybean).
1) Can you please tell me in a step by step guide how u managed to get CM10 & recovery on your phone & where u got the software etc.
2) I have backed-up my phone using Hisuite and Hicloud using cload software to the Internet & SD cards, will this be ok or will your procedure erase my SD card and will i be able to restore.
3) How would you rate CM10 compared to B508 firmware, is everything working as it should.
Your help would be much appreciated, and i would be extremely grateful.
Regards
Nil
nilbymouth said:
Hi,
I have the exact same problem and have been scouring the internet for answer.
I bought my P1 in Hongkong, so had a Hongkong stock B104 firmware, i used unlockroots software to unlock it successfully, but like you did not put any recovery on it, so have no way to flash a new rom or any recovery. i also like you edited the build.prop file using root explorer and flashed B508 (Jellybean).
1) Can you please tell me in a step by step guide how u managed to get CM10 & recovery on your phone & where u got the software etc.
2) I have backed-up my phone using Hisuite and Hicloud using cload software to the Internet & SD cards, will this be ok or will your procedure erase my SD card and will i be able to restore.
3) How would you rate CM10 compared to B508 firmware, is everything working as it should.
Your help would be much appreciated, and i would be extremely grateful.
Regards
Nil
Click to expand...
Click to collapse
Hi!
I used this guide to root, unlock bootloader and install cwm (I know the b508 is 4.1.1 but it worked for me): http://betanews.com/2012/11/13/how-to-root-android-4-2/
Download recovery image from here: http://www.mediafire.com/?pdaj3bohegu0vox
ROM is here (if you haven't found it already): http://forum.xda-developers.com/showthread.php?t=1930207
I don't know if you will be able to restore, but I don't see why not. I used titanium backup, you must be careful not to restore any system apps or settings. Also make a full backup from recovery before restoring because it's possible that it gets stuck on boot. Also it will not erase your SD card but it might be wise to use a clear one just in case.
I've been using this ROM for some time now and it works great. The only thing that bothers me is that video recording doesn't work, but I guess this will be solved in new versions.
Tux2609 said:
Hi!
I used this guide to root, unlock bootloader and install cwm (I know the b508 is 4.1.1 but it worked for me): http://betanews.com/2012/11/13/how-to-root-android-4-2/
Download recovery image from here: http://www.mediafire.com/?pdaj3bohegu0vox
ROM is here (if you haven't found it already): http://forum.xda-developers.com/showthread.php?t=1930207
I don't know if you will be able to restore, but I don't see why not. I used titanium backup, you must be careful not to restore any system apps or settings. Also make a full backup from recovery before restoring because it's possible that it gets stuck on boot. Also it will not erase your SD card but it might be wise to use a clear one just in case.
I've been using this ROM for some time now and it works great. The only thing that bothers me is that video recording doesn't work, but I guess this will be solved in new versions.
Click to expand...
Click to collapse
Hi,
Thank you ever so much, i will give this a go and let you know how it goes, by the way the link for the recovery image is not working, do you have any other links or know where or what i should be looking for.
Rgds
nilbymouth said:
Hi,
Thank you ever so much, i will give this a go and let you know how it goes, by the way the link for the recovery image is not working, do you have any other links or know where or what i should be looking for.
Rgds
Click to expand...
Click to collapse
Yeah, most links work for a short period of time.
Here, this is the one I use
Tux2609 said:
Yeah, most links work for a short period of time.
Here, this is the one I use
Click to expand...
Click to collapse
Thanks for that, the tutorial mentions putting the phone in to fastboot, i have tried holding vol up & down buttons with power, phone just reboots.
I saw others saying to first take the battery out, how the heck do you take the battery out of the Ascend P1 (U9200)?
Could you please tell me how you proceeded at this step, also do you have google play working on it?
Would i not be able to flash a recovery image on the phone using AndroidControl app, it has a tab for flashing recovery but did not want to try it without asking if you tried this method?
Thanks in advance.
nilbymouth said:
Thanks for that, the tutorial mentions putting the phone in to fastboot, i have tried holding vol up & down buttons with power, phone just reboots.
I saw others saying to first take the battery out, how the heck do you take the battery out of the Ascend P1 (U9200)?
Could you please tell me how you proceeded at this step, also do you have google play working on it?
Would i not be able to flash a recovery image on the phone using AndroidControl app, it has a tab for flashing recovery but did not want to try it without asking if you tried this method?
Thanks in advance.
Click to expand...
Click to collapse
Turn off the phone, hold the volume down button and then plug in the usb cable. This should turn the phone on and put it into fastboot.
After that just follow the instructions provided in the link above. I got a few error messages in the process but I proceeded with all commands and it worked.
Tux2609 said:
Turn off the phone, hold the volume down button and then plug in the usb cable. This should turn the phone on and put it into fastboot.
After that just follow the instructions provided in the link above. I got a few error messages in the process but I proceeded with all commands and it worked.
Click to expand...
Click to collapse
Have you tried AndroidControl as it seems to have all the files thats mentioned in the tutorial and makes flashing recovery supposedly easy, i wonder if it will work on an unrooted phone.
nilbymouth said:
Have you tried AndroidControl as it seems to have all the files thats mentioned in the tutorial and makes flashing recovery supposedly easy, i wonder if it will work on an unrooted phone.
Click to expand...
Click to collapse
I have and it didn't work for me. You can try it for yourself if you want to. But this tutorial is easy enough for everyone I think, you just type in the commands it says and that's it.
Tux2609 said:
I have and it didn't work for me. You can try it for yourself if you want to. But this tutorial is easy enough for everyone I think, you just type in the commands it says and that's it.
Click to expand...
Click to collapse
UPDATE: I was able to flash the recovery using AndroidControl, i installed the driver first in fastboot mode and then restarted the phone, while still connected to the pc i ran AndroidControl then chose the flashing tab and flashed the recovery using cwm touch recovery, and then flashed with supersu file you gave me, to give me root acess, all went fine and my phone is now rooted with cwm touch recovery.
I still have not upgraded to CM10 as i wanted to see how B508 will be with Google play now working. As i did not have a recovery mode which could flash zip from sdcard, i was unable to flash gapps zip, i have now flashed gapps and all is working fine.
What was the reason you changed to CM10 rom, was the beta version of B508 not very good for you, i would really like to know what the difference is before flashing another rom?
Thank you very much for your help & assistance and your prompt replies.
XDA develepors forum rocks.
nilbymouth said:
UPDATE: I was able to flash the recovery using AndroidControl, i installed the driver first in fastboot mode and then restarted the phone, while still connected to the pc i ran AndroidControl then chose the flashing tab and flashed the recovery using cwm touch recovery, and then flashed with supersu file you gave me, to give me root acess, all went fine and my phone is now rooted with cwm touch recovery.
I still have not upgraded to CM10 as i wanted to see how B508 will be with Google play now working. As i did not have a recovery mode which could flash zip from sdcard, i was unable to flash gapps zip, i have now flashed gapps and all is working fine.
What was the reason you changed to CM10 rom, was the beta version of B508 not very good for you, i would really like to know what the difference is before flashing another rom?
Thank you very much for your help & assistance and your prompt replies.
XDA develepors forum rocks.
Click to expand...
Click to collapse
Hi!
I'm glad to hear you made it. Why I use CM? Well, there really is no good answer to that. I was using CM on all my other phones too, I'm used to it, I like its speed and stability, I like look and feel and also I like it's additional options. That being said, there is one problem not with CM but with Jelly bean in general. Android 4.2 has a different directory structure, due to its new multiuser features. The problem with that is that you can't install apps on sd card and you can't use directory bind to bind data from sd card. So if you wish to play some games on your phone you will be limited by your phone's memory capacity. I hate this, I used to have a lot of big games on my phone and now I can't have more than two at the same time. At the moment I'm reverting back to 4.0.3 ROM just because of that, at least until theres some kind of solution or workaround for this.
Also theres nothing stopping you from playing with other ROM's. Just make a full backup in recovery and you can always go back to the ROM you find most suitable. In fact I would encourage you to download a few ROM's and try them out, see which one you like the most and which one suits your needs the best.
Tux2609 said:
Hi!
I'm glad to hear you made it. Why I use CM? Well, there really is no good answer to that. I was using CM on all my other phones too, I'm used to it, I like its speed and stability, I like look and feel and also I like it's additional options. That being said, there is one problem not with CM but with Jelly bean in general. Android 4.2 has a different directory structure, due to its new multiuser features. The problem with that is that you can't install apps on sd card and you can't use directory bind to bind data from sd card. So if you wish to play some games on your phone you will be limited by your phone's memory capacity. I hate this, I used to have a lot of big games on my phone and now I can't have more than two at the same time. At the moment I'm reverting back to 4.0.3 ROM just because of that, at least until theres some kind of solution or workaround for this.
Also theres nothing stopping you from playing with other ROM's. Just make a full backup in recovery and you can always go back to the ROM you find most suitable. In fact I would encourage you to download a few ROM's and try them out, see which one you like the most and which one suits your needs the best.
Click to expand...
Click to collapse
Thanks for your advice, you & this forum have been nothing short of brilliant, i myself is contemplating going back to ICS 4.0.3 as it also had the option to install apps on to the SD card, as it is my phone memory is almost full which makes even updating apps difficult as there's no more room to even do this.
I've tried certain apps like gemini app manager & driodsail to move apps to the SD card but none of these seem to work. I'm thinking of trying the official B226 firmware from Huawei just to see if it is ok, i know by doing this it will erase the root permissions, as i can't find a rooted version of this firmware and so will need to root again, but now that i have touch recovery on the phone it will be i presume easier to do this.
I hope they have made improvements on B226, because one of the reasons i actually upgraded to JB 4.1.1 was the sound from the stock google music player seemed low in comparison to JB where the sound was a lot better.
Do you think Huawei will release an official Jellybean firmware for this phone?
Any way thanks again, and keep in touch by letting me know how you got on, would be interested to know on what Rom and why and i shall also let you know on anything that i try or use.
Install apps on sd card, jelly bean 4.2
nilbymouth said:
Thanks for your advice, you & this forum have been nothing short of brilliant, i myself is contemplating going back to ICS 4.0.3 as it also had the option to install apps on to the SD card, as it is my phone memory is almost full which makes even updating apps difficult as there's no more room to even do this.
I've tried certain apps like gemini app manager & driodsail to move apps to the SD card but none of these seem to work. I'm thinking of trying the official B226 firmware from Huawei just to see if it is ok, i know by doing this it will erase the root permissions, as i can't find a rooted version of this firmware and so will need to root again, but now that i have touch recovery on the phone it will be i presume easier to do this.
I hope they have made improvements on B226, because one of the reasons i actually upgraded to JB 4.1.1 was the sound from the stock google music player seemed low in comparison to JB where the sound was a lot better.
Do you think Huawei will release an official Jellybean firmware for this phone?
Any way thanks again, and keep in touch by letting me know how you got on, would be interested to know on what Rom and why and i shall also let you know on anything that i try or use.
Click to expand...
Click to collapse
Hey!
I managed to solve the problem with low internal memory on 4.2. I partitioned my sd card with Mini tool partition wizard, made [fat32 ~16Gb] [ext4 ~ 14Gb], and then I used Mounts2SD app from google play to mount my ext partition as internal storage (Reversed Mount option in app). So far everything seems to be working just fine. (I tried the normal mount, just to move data folder to sd-ext but it didn't work).
Tux2609 said:
Hey!
I managed to solve the problem with low internal memory on 4.2. I partitioned my sd card with Mini tool partition wizard, made [fat32 ~16Gb] [ext4 ~ 14Gb], and then I used Mounts2SD app from google play to mount my ext partition as internal storage (Reversed Mount option in app). So far everything seems to be working just fine. (I tried the normal mount, just to move data folder to sd-ext but it didn't work).
Click to expand...
Click to collapse
Hey,
That's great news, i can't even download Mount2SD from google play as it keeps on saying i have insufficient space on internal storage. I have 255mb left surely this app is not bigger than that, so what could be the problem? as i cant even update existing apps. maybe something got messed up and it's either giving the wrong internal storage amount or something, as i was able to update apps from the google play as soon as i rooted and flashed gapps.zip. Now after that first lot i can't seem to download anymore apps or even update them as it's reporting as insufficient storage space and this is with even un-installing some apps. I may have to flash the firmware again to get rid of any crap that was in there and flash recovery/root & gapps as well.
mount sd-ext as internal storage
nilbymouth said:
Hey,
That's great news, i can't even download Mount2SD from google play as it keeps on saying i have insufficient space on internal storage. I have 255mb left surely this app is not bigger than that, so what could be the problem? as i cant even update existing apps. maybe something got messed up and it's either giving the wrong internal storage amount or something, as i was able to update apps from the google play as soon as i rooted and flashed gapps.zip. Now after that first lot i can't seem to download anymore apps or even update them as it's reporting as insufficient storage space and this is with even un-installing some apps. I may have to flash the firmware again to get rid of any crap that was in there and flash recovery/root & gapps as well.
Click to expand...
Click to collapse
Just try to do a full wipe and reflash the rom. I'm still using CM10.1 and it works great. (except the video recording still doesn't work). Be sure to flash the right version of gapps. You can partition your sd card before doing all this, you can even partition it with cwm but it supports the maximum size of 4Gb, so I used mini tool partition wizard (as I mentioned before). When you're done, install mounts2sd from google play, install scripts from there and choose reverse mount option, restart your phone and that should be it, your sd-ext partition is now mounted as internal storage. I strongly recommend class 10 sd cards for this, I'm using one myself and so far haven't experience any lag, even games work perfectly.
Tux2609 said:
Just try to do a full wipe and reflash the rom. I'm still using CM10.1 and it works great. (except the video recording still doesn't work). Be sure to flash the right version of gapps. You can partition your sd card before doing all this, you can even partition it with cwm but it supports the maximum size of 4Gb, so I used mini tool partition wizard (as I mentioned before). When you're done, install mounts2sd from google play, install scripts from there and choose reverse mount option, restart your phone and that should be it, your sd-ext partition is now mounted as internal storage. I strongly recommend class 10 sd cards for this, I'm using one myself and so far haven't experience any lag, even games work perfectly.
Click to expand...
Click to collapse
Thanks mate, i'll give that a go.
Just out of interest now that you have changed the format of your microsd card to ext4, is it still visible as a drive when you connect to the pc,or did you have another program in Windows to make them visible?
nilbymouth said:
Thanks mate, i'll give that a go.
Just out of interest now that you have changed the format of your microsd card to ext4, is it still visible as a drive when you connect to the pc,or did you have another program in Windows to make them visible?
Click to expand...
Click to collapse
Yes, if you connect it as MTP device it shows as u9200 device with two partitions: internal storage (which is sd-ext partition) and sd card.
Tux2609 said:
Yes, if you connect it as MTP device it shows as u9200 device with two partitions: internal storage (which is sd-ext partition) and sd card.
Click to expand...
Click to collapse
Will i loose my cwm touch recovery if i flash the rom again?
nilbymouth said:
Will i loose my cwm touch recovery if i flash the rom again?
Click to expand...
Click to collapse
No.
I tried to install xposed on my brand new zf2. latest stock rom version. stuck in a boot loop. (only saw the warnings to not do so after it was too late -.- ) whats the easiest way to fix this? anyone? I've seen the ways to unbrick, but wondering if there's a simpler way, since I can enter the menu and all, and I've got ADB installed (already rooted via adb) I assume there's a simple way to reflash the firmware?
thanks in advance for any help
EDIT: specifically, if it makes any difference, I used method 3 in the resources all in one thread to root. (1 click root tool) I'd REALLY like a way to remove xposed from the device and restore the boot without losing some files. I had some data on my micro sd card from my old phone, I saved it to the zf2 and when removing the micro sd card, it seems to have broken, I just tried putting my old micro sd card back into my old phone, and I got nothing. so the amount of potential lost data here is rather discouraging. failing that, is there any way to copy data from the device before reflashing the firmware?
things I have done so far: rooted, installed busybox, then tried to install xposed framework
Hi,
2.20.40.160 firmware for Z00A isn't compatible yet with Xposed.
Try this tutorial to restore your phone into the working condition -> http://forum.xda-developers.com/showthread.php?t=3292178
Sent from my GT-I9500
Hoping someone can provide fix. Gapps unresponsive/crashing immediately after auto-update. Standard solutions are a no go(wipe cache/data, dalvik, degrenify, reboot). Have tried everything short of a clean install of system/gapps. No previous issues or crashing. Haven't posted here so my apologies if data is lacking. Let me know what you need. I am running RR 8.1 v6.0.0. Wondering if anyone else has had this issue surface recently.
roottube said:
Hoping someone can provide fix. Gapps unresponsive/crashing immediately after auto-update. Standard solutions are a no go(wipe cache/data, dalvik, degrenify, reboot). Have tried everything short of a clean install of system/gapps. No previous issues or crashing. Haven't posted here so my apologies if data is lacking. Let me know what you need. I am running RR 8.1 v6.0.0. Wondering if anyone else has had this issue surface recently.
Click to expand...
Click to collapse
I'm assuming you don't want to clean install because you have files you want on the device ? If so just boot into TWRP recovery and plug the phone in to PC, pull the files off and clean install.
I am abroad without computer and slow wifi, so was just hoping to avoid clean install as it will be a hassle. Could the fact that I am abroad be a contributing factor? I would guess no, but perhaps you are more knowledgeable. Is there a way to uninstall/reinstall gapps without issue? Have done that in the past and it seems the only way to install gapps is immediately after clean installation, without reboot. Thank you for your response
Phalanx7621 said:
I'm assuming you don't want to clean install because you have files you want on the device ? If so just boot into TWRP recovery and plug the phone in to PC, pull the files off and clean install.
Click to expand...
Click to collapse
I am abroad without computer and slow wifi, so was just hoping to avoid clean install as it will be a hassle. Could the fact that I am abroad be a contributing factor? I would guess no, but perhaps you are more knowledgeable. Is there a way to uninstall/reinstall gapps without issue? Have done that in the past and it seems the only way to install gapps is immediately after clean installation, without reboot. Thank you for your response
roottube said:
I am abroad without computer and slow wifi, so was just hoping to avoid clean install as it will be a hassle. Could the fact that I am abroad be a contributing factor? I would guess no, but perhaps you are more knowledgeable. Is there a way to uninstall/reinstall gapps without issue? Have done that in the past and it seems the only way to install gapps is immediately after clean installation, without reboot. Thank you for your response
Click to expand...
Click to collapse
I'm not sure what would happen of you reinstall gapps, I haven't ever tried without wiping first. Anyone else know ?
Brand new device. Flashed custom OS (Arrow OS and google pixel)- no sound at all. No Youtube sounds, no call sounds, no media sounds, even Bluetooth, even with headphones. Phone are silent absolutely.
Please help.
Thanks in advance, guys!
Dude ask that in the arrow OS Apollo Pro discussion group. They are developers for the Roms and can solve the problem better. However they will require you to clean flash the rom and also the logcat file for your device bug. Hope you know how to get that.
If u still got that issue try things in my topic. maby some of it will help u it is similar case to mine dont think it is arrow os problem because it happened on many xiaomi devices and different updates eaven stock ones - everything is related to update and restarting after it. dunno what cause it yet but there is problem with audio driver.
No sound issue can u help?
Hello Im xda forum user sience many years but on this account im new (lost my old one). I remember flashing pda's, nokias and other ancient hardware :), not an expert but quite experienced user. I had some break with flashing, tempering with...
forum.xda-developers.com
Delete Dalvik/Art Cache with booting (no flash) a no oficial twrp by geoanto555, and the issue will be fixed https://xiaomi.eu/community/threads...redmi-k30s-ultra-thorough-step-by-step.61742/ (here is the link and the steps for boot a custom recovery)
I deleted all except Cust and OTG, but maybe only with Dalvik Cache will be fine. (I had the same problem but not now)
Sorry for my english
Hi All,
Did we find any solution on that matter?
Thanks in advance
The problem has to do with not doing a clean installation, completely clean, surely, when I finally unlocked the phone and installed Lineage, the sound on the phone didn't work, I tried other roms like Pixel Experience and it didn't work either, until I decided to go back to Miui and looking for Xiaomi.EU I came across the geoanto twrp, which will no longer be available now, but any twrp up to the task will do and I deleted absolutely everything except the cust and the problem was solved when I installed Lineage again .
Puruixa said:
The problem has to do with not doing a clean installation, completely clean, surely, when I finally unlocked the phone and installed Lineage, the sound on the phone didn't work, I tried other roms like Pixel Experience and it didn't work either, until I decided to go back to Miui and looking for Xiaomi.EU I came across the geoanto twrp, which will no longer be available now, but any twrp up to the task will do and I deleted absolutely everything except the cust and the problem was solved when I installed Lineage again .
Click to expand...
Click to collapse
Thanks for that, I will try it soon, by the way I've sent you a PM asking you if you can provide more details with links if its possible?
Anyway, thanks for your support on that, I will try it and let you know.
Thanks again
same problem here. this sucks..
Putting the device in a frezzer then reboot makes at least audio work, but mic still broken.
Puruixa said:
The problem has to do with not doing a clean installation, completely clean, surely, when I finally unlocked the phone and installed Lineage, the sound on the phone didn't work, I tried other roms like Pixel Experience and it didn't work either, until I decided to go back to Miui and looking for Xiaomi.EU I came across the geoanto twrp, which will no longer be available now, but any twrp up to the task will do and I deleted absolutely everything except the cust and the problem was solved when I installed Lineage again .
Click to expand...
Click to collapse
Hi! I read your post in xda that you solved your Mi10t pro no sound problem.
If you don't mind can please tell steps to do it?
I used oficial twrp by geoanto555, format data, then wiped everything except cust and otg, then reboot into bootloader.
At bootloader, boot into twrp again, installed rom, then wiped cache and dalvik, reboot into recovery.
At recovery, wipe data, then reboot.
Still no sound at all. When checking our ringtones and choosing any sounds to play them, it shows "error"...
Phone completely no sound, can't listen music, can't hear calls etc...
Thanks
Hi,
I flashed TWRP on my unlocked Redmi Note 8T with MIUI Global 12.5.5. Everything was great until I rebooted it and saw Bluetooth error which pops every time I try to turn Bluetooth on or just randomly during usage of the device. I also tried to re-flas TWRP with Orange fox but it unfortunatelly did not help. Now I have no idea what to do but there are also some other people with this problem (for example:
https://www.reddit.com/r/Xiaomi/comments/y9zsak
).
Does anybody know any solution? Thanks!
Btw Orange fox is for ginko devices, I did not find version for willow
I had the exact same problem when I tried to root my stock rom in ginkgo. I was getting a lot of "app keeps stopping" pop ups, and that also included bt. My bt was completely broken until I changed rom. Also I'm guessing this had happened when I had rooted my phone with magisk, not by flashing recovery itself. Perhaps you could try to uninstall magsik, and see it it resolves the issue for you. If that would be the case, then you would have found your problem, and maybe you can flash a custom rom to safely root your phone.
Thanks for reply, but i did not have magisk flashed on my phone. I only had installed the app, prepared apk file and did nothing in TWRP (Orange fox) , just flashed a recovery with my PC, checked that it is working and rebooted device. Anyway I tried to do it only because of acces to NFC and Gpay which is now blocked.
As you also said, I would like to try custom rom (like LineageOS) because it seems like bad idea to have a stock room on an unlocked phone. Only the problem is how to backup data like data from apps, games etc.
So now it tried one of my ideas, which was to install Magisk (root) and uninstall it but it also did not help (I expected that)
vasik006 said:
Thanks for reply, but i did not have magisk flashed on my phone. I only had installed the app, prepared apk file and did nothing in TWRP (Orange fox) , just flashed a recovery with my PC, checked that it is working and rebooted device. Anyway I tried to do it only because of acces to NFC and Gpay which is now blocked.
As you also said, I would like to try custom rom (like LineageOS) because it seems like bad idea to have a stock room on an unlocked phone. Only the problem is how to backup data like data from apps, games etc.
Click to expand...
Click to collapse
To backup data simply copy your personal files in pc or sdcard. And to backup data in apps, take back-up of only those apps and where you need to backup. Don't take a complete backup using some app. That consumes a lot of space and make the newly rom feel "not so new". Most apps don't require you to take back-up offline these days. I usually backup only my personal files before flashing rom.
Yeah, that's true. But don't you know how to backup data from these "offline" apps? I was trying to solve this also before unpocking bootloader like a year ago but unsuccessfuly.
Also, which rom should I choose? I'm deciding between LineageOS and Pixel experience.
So I have LOS installed but I can´t install other zip files (like Google apps). Im only getting error: signature verification failed while. Im using LOS recovery so where is the problem?
Solved it!
Hey @vasik006 ! I know this is very late and you might have found the solution yourself, but I found the solution to this problem. Since yesterday I was trying to root my ginkgo with twrp, using magisk delta and had exact same issue. Joyose and bluetooth keeps stopping, and don't work. Simply factory reset ( I also formatted data) in twrp, and in next boot bluetooth should work. Then you can simply install the magisk apk and let it do its thing. No need to flash again since it has already made changes to boot file that can't be overriden by resetting phone.
Thanks, this might help someone else with this problem. I have already formatted my phone, installed Lineage OS and everything is ok
For me, the problem with BT and Joyose occurs only with TWRP v3.7.x. I went back to TWRP v3.6.1_9-0 but now backups are not working.
Jatin Verma x821 said:
Hey @vasik006 ! I know this is very late and you might have found the solution yourself, but I found the solution to this problem. Since yesterday I was trying to root my ginkgo with twrp, using magisk delta and had exact same issue. Joyose and bluetooth keeps stopping, and don't work. Simply factory reset ( I also formatted data) in twrp, and in next boot bluetooth should work. Then you can simply install the magisk apk and let it do its thing. No need to flash again since it has already made changes to boot file that can't be overriden by resetting phone.
Click to expand...
Click to collapse
I have the same problem with the Redmi note 8. Did you unroot first or did the factory reset directly? Tks
ennev said:
I have the same problem with the Redmi note 8. Did you unroot first or did the factory reset directly?
Click to expand...
Click to collapse
no need to unroot. simple factory reset the device and you're done.
Jatin Verma x821 said:
To backup data simply copy your personal files in pc or sdcard. And to backup data in apps, take back-up of only those apps and where you need to backup. Don't take a complete backup using some app. That consumes a lot of space and make the newly rom feel "not so new". Most apps don't require you to take back-up offline these days. I usually backup only my personal files before flashing rom.
Click to expand...
Click to collapse
TWRP is invaluable for backing up the system before making changes like theming etc. and I can take a TWRP backup to any of my (all the same) devices and restore the whole thing in just a few minutes. So convenient! I really couldn't imagine life without TWRP. TWRP enables me to clone my device in case of hardware failure. All my settings and all my apps and all my custom configurations which would otherwise take hours/days to setup - BAM! Presto! on the new device and running perfectly.
TWRP + NeoBackup are essential. TWRP as described, and NeoBackup to roll back breaking updates to apps when devs butcher them, break them, and/or just remove really useful features. I also disconnect apps that get ruined by an update from the Play Store so they don't keep coming up when I check for updates.
Alpha_Geek1 said:
TWRP is invaluable for backing up the system before making changes like theming etc. and I can take a TWRP backup to any of my (all the same) devices and restore the whole thing in just a few minutes. So convenient! I really couldn't imagine life without TWRP. TWRP enables me to clone my device in case of hardware failure. All my settings and all my apps and all my custom configurations which would otherwise take hours/days to setup - BAM! Presto! on the new device and running perfectly.
TWRP + NeoBackup are essential. TWRP as described, and NeoBackup to roll back breaking updates to apps when devs butcher them, break them, and/or just remove really useful features. I also disconnect apps that get ruined by an update from the Play Store so they don't keep coming up when I check for updates.
Click to expand...
Click to collapse
I would advise you to read the posts again. They were asking about how to take backup of "personal apps" which twrp can't do, and if they are changing ROM then twrp backup won't be of any use to them. Therefore, whatever you're trying to tell here doesn't really help the discussion.
Jatin Verma x821 said:
I would advise you to read the posts again. They were asking about how to take backup of "personal apps" which twrp can't do, and if they are changing ROM then twrp backup won't be of any use to them. Therefore, whatever you're trying to tell here doesn't really help the discussion.
Click to expand...
Click to collapse
TWRP does backup personal apps and their settings. Once you restore a TWRP backup, you have everything back except media files - images, videos, documents, etc. The launcher icons, the apps, the system settings - everything is a perfect clone which you can restore on a new device (same model, of course).
I actually came across this thread searching to see if others had a problem where merely flashing TWRP caused Bluetooth to crash (and Atmos).
Use OrangeFox
is there anyone use BT-fix-for-PE-20190618.zip to fix this problem ?
I'm on an ROG Phone II with the same issue.
The "fix" is to wipe in TWRP and install Magisk BEFORE you leave for your first boot and NEVER come back to TWRP as the issue will return the second recovery is booted.
s3rv said:
For me, the problem with BT and Joyose occurs only with TWRP v3.7.x. I went back to TWRP v3.6.1_9-0 but now backups are not working.
Click to expand...
Click to collapse
From what I can tell, this is correct. 3.6_XX-X allows me to come and go from TWRP as much as I please without incurring the bug, however, I haven't tested backup though I can't see a reason why they wouldn't work.
Are these existing backups that aren't working or the whole backup function in general?
starkshadow said:
is there anyone use BT-fix-for-PE-20190618.zip to fix this problem ?
Click to expand...
Click to collapse
It looks like this guy didn't have any luck with it either. It may be divice specific
Dredead said:
I'm on an ROG Phone II with the same issue.
The "fix" is to wipe in TWRP and install Magisk BEFORE you leave for your first boot and NEVER come back to TWRP as the issue will return the second recovery is booted.
From what I can tell, this is correct. 3.6_XX-X allows me to come and go from TWRP as much as I please without incurring the bug, however, I haven't tested backup though I can't see a reason why they wouldn't work.
Are these existing backups that aren't working or the whole backup function in general?
It looks like this guy didn't have any luck with it either. It may be divice specific
Click to expand...
Click to collapse
amazing, I have do nothing, just reboot my device, and yesterday the bluetooth also has problem, but today I open bluetooth, it is no problem. I'm still confused about that.
starkshadow said:
amazing, I have do nothing, just reboot my device, and yesterday the bluetooth also has problem, but today I open bluetooth, it is no problem. I'm still confused about that.
Click to expand...
Click to collapse
It seems to be a twrp issue. What version do you have? And what version of magisk do you have?
I have recently flashed miui 12 (android 10) after bricking the phone using qtel. I noticed the Bluetooth problem last week and didn't find a fix. I have twrp 3.6.2 and magisk 25.1. I had twrp 3.7.1 but if failed to decrypt data using pattern so I rolled back to 3.6.2. And I thought that magisk had to do with the Bluetooth problem so I rolled back to 25.1 from 26.
I still can't use the Bluetooth, and I don't have time to reset the phone, I just finished restoring everything
I CAN CONFIRM
go back to the previous twrp 3.6.2 version + wipe factory reset or simply format data solve sucesfuly solve installation issue of Magisk 26.1 or Magisk Delta 25210
Olfason said:
I CAN CONFIRM
go back to the previous twrp 3.6.2 version + wipe factory reset or simply format data solve sucesfuly solve installation issue of Magisk 26.1 or Magisk Delta 25210
Click to expand...
Click to collapse
I can't afford resetting my phone right now , don't have enough time. I'll let it like that for some months.
Edit : I have miui 12.0.6 installed (android 10) and I'm not planning to upgrade since I have much better battery life (even better than every mod I tried). I wander if I flash miui rom from recovery can fix it?
Edit 2: flashing the rom from recovery didn't fix it