So let's talk about the biggest turn off on this phone , not the lack of NFC but the screen resolution , it's not the best and you can learn to adapt to it but here and there the scaling is just bad. Especially for others like my self coming from old flagships with a higher resolution (had an S8 and 720p is quite the downgrade from 1440p).
fortunately enough in developer options there is the option to change how the phone scale by changing the smallest width , mine is set at 480 dp and I like the phone way more than the day I got it ,
share your experience regarding the best settings for the screen scaling !
sounds good, how to do it?
---------- Post added at 01:24 AM ---------- Previous post was at 01:23 AM ----------
... develepor options, didnt read carefully
psycø lucïfer said:
fortunately enough in developer options there is the option to change how the phone scale by changing the smallest width , mine is set at 480 dp and I like the phone way more than the day I got it ,
share your experience regarding the best settings for the screen scaling !
Click to expand...
Click to collapse
Thanks for the sharing man! Love it with 480dp.
It's in Developer Options > Drawing Section > Smallest width
I'm digging 390.
What was the default value ??
360 is default
dragganta said:
360 is default
Click to expand...
Click to collapse
360 seems way to big, makes the phone look like toy, default was 400 something, anyway mine is at 413 and it looks fine
Simran62 said:
360 seems way to big, makes the phone look like toy, default was 400 something, anyway mine is at 413 and it looks fine
Click to expand...
Click to collapse
360 is actually the stock value, it also seems huge to me after setting it at 420
GoelPlz said:
360 is actually the stock value, it also seems huge to me after setting it at 420
Click to expand...
Click to collapse
Ya it was looking huge when i reverted back to 360, so maybe it happened after seeing it at 400+
390 is great.
You can use settings -> display -> GUI size (or interface size, not sure about English term). Values used by system are 320, 360 and 423dp.
now on android 10 increasing the screen's dpi causes the notification bar to cut the battery icon and the clock
Ergeles said:
now on android 10 increasing the screen's dpi causes the notification bar to cut the battery icon and the clock
Click to expand...
Click to collapse
Do you have a screenshot? Maybe it could be solved by increase of the padding.
adb shell settings put secure sysui_rounded_content_padding x
_mysiak_ said:
Do you have a screenshot? Maybe it could be solved by increase of the padding.
adb shell settings put secure sysui_rounded_content_padding x
Click to expand...
Click to collapse
I don't have another phone to show how it looks on the screen, but I've already tried this ADB command, but it looks like it doesn't work on the Mi A3
Ergeles said:
I don't have another phone to show how it looks on the screen, but I've already tried this ADB command, but it looks like it doesn't work on the Mi A3
Click to expand...
Click to collapse
Not sure about Android 10, but it works fine in Android 9.
Return to default value:
Code:
laurel_sprout:/ # settings delete secure sysui_rounded_content_padding
Deleted 1 rows
laurel_sprout:/ # settings get secure sysui_rounded_content_padding
null
Move towards center (experiment with the last number, default is about 8):
Code:
laurel_sprout:/ # settings put secure sysui_rounded_content_padding 10
_mysiak_ said:
Not sure about Android 10, but it works fine in Android 9.
Return to default value:
Code:
laurel_sprout:/ # settings delete secure sysui_rounded_content_padding
Deleted 1 rows
laurel_sprout:/ # settings get secure sysui_rounded_content_padding
null
Move towards center (experiment with the last number, default is about 8):
Code:
laurel_sprout:/ # settings put secure sysui_rounded_content_padding 10
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
https://imgur.com/s0IUO6C
https://imgur.com/u5w0v8M
(I just realized that I don't know how to add a photo: p)
any number above 423 starts cutting the battery and the clock
and the commands didn't work here
Thanks for this! Screen looks much sharper because of this! Could be placebo lol
480 works fine, my bigger turn off is the pixels you can view on the screen, you can note it when you see brighter shades on screen. add to that I'm using a matte screen protector ...and I feel this screen guard only enhances the pixel problem.
Galaxy Tab A 10.1
Min - 320dp
Default - 901dp
Max - 1600dp
393 dpi is best
Related
I changed the screen dpi to 200 but now miui launcher looks weird.
So I'm using adw launcher with 1 extra row and looks nice, however I like the way miui launcher functions, like when I install a app it immediately puts it on desktop, just like the iphone.
Is there any launcher that acts like this and also allows to change number of rows and columns?
this is miui default, folders and other widgets look even weirder
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
adw is perfect
out of interest, how did you change it?
with lcd density, app from market
Naffets said:
out of interest, how did you change it?
Click to expand...
Click to collapse
You change the LCD density string in build.prop to set it permanently, or use lcd density changer from the market to do a temp change.
You can use a tool called "Absolute System" to edit the build.prop easily.
Sent from my GT-I9100 using Tapatalk
you can use launcherpro which allows to change number of rows and columns
and what would exactly be the point in changing it?
may be engwee wants to see more apps at the same time without moving the screen up and down
Jiniko77 said:
and what would exactly be the point in changing it?
Click to expand...
Click to collapse
changing the lcd density has the same same effect as changing the resolution on your pc monitor. the phone will fit more on the display, so smaller icons and text etc...
any of this apps are changing the phone dialer too ?.....???
None of the sammy aps like dialer change with DPI changes, everything looks smaller and a bit crap, you will either need to find a ROM with DPI changes built in for that or there might be a theme you can use maybe.
My theme is built for changed DPI (shameless plug)
Sent from my GT-I9100 using xda premium
da.trute said:
None of the sammy aps like dialer change with DPI changes, everything looks smaller and a bit crap, you will either need to find a ROM with DPI changes built in for that or there might be a theme you can use maybe.
Click to expand...
Click to collapse
Yes, TouchWiz doesn't play nice with DPI changes. Use Go Contacts (includes dialer) for dialer - I haven't found a MULTI-DPI camera replacement yet tho.
Sent from my GT-I9100 using xda premium
Changing LCD Density
Changing the density changes the whole phone - if you set density to a lower number everything will be smaller on the screen and then you can fit more items on the screen. A higher number will make things bigger and fit less.
An unfortunate side effect of changing DPI however is that quite a lot of apps don't like it and will force close when you try and open them. For example, I just set mine to 200dpi and Angry Birds FC's.
The Market is another app that seems to be fairly DPI sensitive, however in my case right now running CM7 nightly the Market is working fine at 200dpi.
Another effect can also be black bands around apps that are not written to scale to screen DPI but rather with hard coded sizes for LDPI/MDPI/HDPI.
Cheers!
ecips said:
Changing the density changes the whole phone - if you set density to a lower number everything will be smaller on the screen and then you can fit more items on the screen. A higher number will make things bigger and fit less.
Click to expand...
Click to collapse
Gotcha!
You've got PM!!!
Big sorry for polluting the thread, but i can't seem to get a hold of ecips
ayk33 said:
you can use launcherpro which allows to change number of rows and columns
Click to expand...
Click to collapse
like I said in my first post, I'm using ADW and it works fine with it, I was looking for a miui like launcher, with all the apps on desk and no app drawer, probably doesn't exist.
While I was on miui rom I didn't encounter problems with the apps I used, this goes from games to standard apps, like the market.
Now I'm on stock and I saw the dialer is small, but no problem otherwise, when I get called the slider works fine.
the advantage is it makes the screen seem like higher res, browser fits a lot more content, holding it next to a sensation it looks the same, one difference I encountered on sensation is a game megajump, doesn't fill out the screen while on sgs2 with dpi change it still does.
it probably looks so good because of the samoled + subpixel density stuff
It makes it look extremely hi-res. I can't, no, WON'T have my phone at stock DPI, ever.
Sent from my GT-I9100 using xda premium
'Nough said...I switched to 200 and i'm in love baby. Only problem...dialler misplaced and camera screwed up. Any ideas?
my ideea is to live with them, my camera app is fine though
restarted phone today.. and it looks so ugly with the initial dpi
engwee said:
my ideea is to live with them, my camera app is fine though
restarted phone today.. and it looks so ugly with the initial dpi
Click to expand...
Click to collapse
yes camera it's fine at 200 dpi in kg5
I seem to be able set up only a small portion of any pic that i choose as my profile photo instead of the whole thing. It feels like there is pixel upper limit like 300x300 or something similar. Any idea guys? Btw im on the stock oxygen 3.2.1 rooted with exposed and gravity box installed.
Thanks
Sent from my ONEPLUS A3000 using Tapatalk
ikaraca said:
I seem to be able set up only a small portion of any pic that i choose as my profile photo instead of the whole thing. It feels like there is pixel upper limit like 300x300 or something similar. Any idea guys? Btw im on the stock oxygen 3.2.1 rooted with exposed and gravity box installed.
Thanks
Click to expand...
Click to collapse
I thought this must be a glitch in mine only because of the screen density I use. Have you changed your dpi? Mine is at 290.
ikaraca said:
I seem to be able set up only a small portion of any pic that i choose as my profile photo instead of the whole thing. It feels like there is pixel upper limit like 300x300 or something similar. Any idea guys? Btw im on the stock oxygen 3.2.1 rooted with exposed and gravity box installed.
Thanks
Sent from my ONEPLUS A3000 using Tapatalk
Click to expand...
Click to collapse
Angadadlakha said:
I thought this must be a glitch in mine only because of the screen density I use. Have you changed your dpi? Mine is at 290.
Click to expand...
Click to collapse
Use "Le DPI Changer" to change dpi and everything will be fine. It have 3 different options to change. if one doesn't work use another option.
Angadadlakha said:
Mine is at 290.
Click to expand...
Click to collapse
Mind sharing screenshot. i wanna see how 290 looks.
.xaos. said:
Use "Le DPI Changer" to change dpi and everything will be fine. It have 3 different options to change. if one doesn't work use another option.
Mind sharing screenshot. i wanna see how 290 looks.
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Though abt the LE Dpi Changer I dont think it works on the oneplus 3 as dpi setting is absent in the buildprop. I changed my dpi using adb command.
adb shell wm density 290 && adb reboot
Update.
Tried LE DPI Changer.
Enabling use Shell WM for setting dpi works like a charm. Changed to 340, updated whatsapp profile pic. It worked fine. Then changed back to 290.
Well it works for me and many others.
Ive attached the screenshots at 290
Yes my dpi was changed to 400. And thanks for the help.
Sent from my ONEPLUS A3000 using Tapatalk
Hi,
I got the same issue. Also posted on Oneplus Forums.
I had earlier tried to use LE DPI Changer..
First, clicked on Set DPI. and then clicked on Edit Build.prop. It then created a New Build.prop and after reboot I ended up in Boot loop. Checking the Build prop from within Recovery showed me only one line which was of LCD.density. All other entries where gone. I had to replace the backup Build,prop and uninstalled the LE DPI Changer app.
Could you guide me how do you get a successful change ? also, cn you confirm this issue was resolved after the DPI changed to lower ?
Thanks.
Edit: Le DPI Changer worked like charm. Though the problem was not resolved. Tried changing it to 400,320,290. Still the image is zoomed.
any ideas ?
If you're like me, you probably find the XZ's default density of 480 makes items far too large and cuts out text. The Googl Pixel, which is also a 5.0" 1080p screen uses a 420dpi. To make your XZ the same:
* Enable developer settings
* Enable ADB over USB
* From a computer, with adb, type:
adb shell wm density 420
The change will be instant, though a reboot is recommended.
CLShortFuse said:
If you're like me, you probably find the XZ's default density of 480 makes items far too large and cuts out text. The Googl Pixel, which is also a 5.0" 1080p screen uses a 420dpi. To make your XZ the same:
* Enable developer settings
* Enable ADB over USB
* From a computer, with adb, type:
adb shell wm density 420
The change will be instant, though a reboot is recommended.
Click to expand...
Click to collapse
Can you add a screenshot comparing both the densities ?
Thank you
chawlasrijan said:
Can you add a screenshot comparing both the densities ?
Thank you
Click to expand...
Click to collapse
i did it !! you can't actually feel the differences. i only understood it through the keyboard and the little gaps on the sides of the dock
CLShortFuse said:
If you're like me, you probably find the XZ's default density of 480 makes items far too large and cuts out text. The Googl Pixel, which is also a 5.0" 1080p screen uses a 420dpi. To make your XZ the same:
* Enable developer settings
* Enable ADB over USB
* From a computer, with adb, type:
adb shell wm density 420
The change will be instant, though a reboot is recommended.
Click to expand...
Click to collapse
This is the greatest thing ever. Thanks heaps!
Any way to shrink the notification text to match? Cheers, mate!
Edit: a restart fixed it - all good! I found 400 to be perfect for me. Thanks again.
I GOT SCREENSHOTS!
The change takes effect immediately so watch your screen closely before pressing enter on terminal.
Reboot after change is still advised.
460 dpi (27% battery)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
420 dpi (29% battery)
440 dpi
Bonus:
The "recognized developer" badge on play store screwed up after a reboot... Just thought it is interesting
How does reducing the density make icons and text appear smaller? Shouldn't it do the opposite? How does this change affect the picture quality of the display (same, worse, better)?
Window Manager density isn't the same as device density in build.prop. There are awkward effects when developers don't use the WM density. Also, you rely on nodpi packages now.
Still, the side effects are rare and IMO the pros greatly outweigh the cons.
CLShortFuse said:
If you're like me, you probably find the XZ's default density of 480 makes items far too large and cuts out text. The Googl Pixel, which is also a 5.0" 1080p screen uses a 420dpi. To make your XZ the same:
* Enable developer settings
* Enable ADB over USB
* From a computer, with adb, type:
adb shell wm density 420
The change will be instant, though a reboot is recommended.
Click to expand...
Click to collapse
Thanks for this. However i noticed noughat has this functionality built in but it seems to only have 3 (Small to Large) settings, whereas the pixels phone have 5 (small to Largest).
Have sony been stupid and just reduced functionality?
There is actually a simpler way. .You can find the same in "Developer Options" on your device with Android 7.0 Nougat, just below the Animation Settings
Mazellat said:
There is actually a simpler way. .You can find the same in "Developer Options" on your device with Android 7.0 Nougat, just below the Animation Settings
Click to expand...
Click to collapse
Thanks but i cant seem to find it in developer options. do yoiu mind sending a screen grab
coleburns said:
Thanks but i cant seem to find it in developer options. do yoiu mind sending a screen grab
Click to expand...
Click to collapse
Settings> Display >view >display size >small, default, big ?
Zewarxx said:
Settings> Display >view >display size >small, default, big ?
Click to expand...
Click to collapse
I am aware of this setting as per my original question. i was referring to the setting under developer options
coleburns said:
Thanks but i cant seem to find it in developer options. do yoiu mind sending a screen grab
Click to expand...
Click to collapse
Sent from my F8332 using Tapatalk
paphonb said:
Sent from my F8332 using Tapatalk
Click to expand...
Click to collapse
Apparently I don't have this option ..
It's 7.0 specific?
lnxcat said:
Apparently I don't have this option ..
It's 7.0 specific?
Click to expand...
Click to collapse
Yes.
Sent from my F8332 using Tapatalk
460 is good 5 icon in Pixel launcher and looks good
I've set mine to 420dp and can have 5 icons per row on stock home launcher , looks loads better
You can alsow change the resolution without root
adb shell wm size 720x1280
adb shell wm density 320
now icon not small but some effects on battery usage
ClementNg23 said:
I GOT SCREENSHOTS!
The change takes effect immediately so watch your screen closely before pressing enter on terminal.
Reboot after change is still advised.
460 dpi (27% battery)
420 dpi (29% battery)
440 dpi
Bonus:
The "recognized developer" badge on play store screwed up after a reboot... Just thought it is interesting
Click to expand...
Click to collapse
What's the theme you using?
pw1nce said:
What's the theme you using?
Click to expand...
Click to collapse
Nova Launcher with Polycon icon pack. Stock ROM when the screenshots were taken.
https://play.google.com/store/apps/details?id=com.teslacoilsw.launcher&hl=en
https://play.google.com/store/apps/details?id=com.thearclabs.polycon&hl=en
Switcher 4K
Hi,
I built a simple app that allow you to quickly switch the virtual resolution between default 2K and 4K without a computer.
Unfortunately, since the command is not available on the userland, the process needs superuser permission to change virtual resolution.
If you somehow manage to break your resolution, especially leading to crash loop of Xperia Home, check on other topics how to restore the original values.
Since the custom feature can be "dangerous" for the reasons above, I added a check when save and switch custom values to avoid any resolution under [email protected] (Z5 Compact default values).
Min Android version: 6.0
Target: 9.0
Screenshot(s):
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Changelog:
Code:
v1.3: Updated to SDK 28 (Android 9.0).
Updated description string with "XZ2".
Removed useless email button.
[COLOR="Red"][B]Uninstall previous versions before installing this one ![/B][/COLOR]
v1.2: Implemented customization button and form. Values are saved in app storage.
v1.1: Implemented App Shortcuts (Android 7.1+).
Switching to 2K now reset to OEM values, not set 1080p ones.
v1.0: Release.
Planned in future releases (low probability..):
Code:
* Tab with buttons in the notification list.
* Widget with buttons, maybe.
* Any idea?
Download:
Grab the APK here or it is available on Play Store.
MD5
Code:
1.0: 16235380d92fff111e8327b3100a07e8
1.1: bb1a9b6130cb1c4633fd237e2015272f
1.2: 6c3d6ece09ea8305c7f4e40d23ad4dd0
1.3: 3d89fec72d3e5804cd46bab417e6c702
Nice! It would make more sense if it said "Xperia Z5/XZ Premium though!
Can you please change? :angel:
FartyParty said:
Nice! It would make more sense if it said "Xperia Z5/XZ Premium though!
Can you please change? :angel:
Click to expand...
Click to collapse
Thanks, I will change it for the next revision.
Hey,
Released v1.1, adding App Shortcuts, switch to 2K now reset to OEM values, and FartyParty's request.
Nice work friend. :good:
Hey,
Released v1.2 that add custom values support. Check the first post.
If anyone have more accurate values about the limit resolutions supported by Xperia Home, let me know I will update the security checks.
Looks good! Thanks !
Dialler crash all the time can't make call
Shellyaffff said:
Dialler crash all the time can't make call
Click to expand...
Click to collapse
Yes, it is one of the goal of this app, being able to switch back to 1080p without a PC to use apps that doesn't support 4K.
The phone app is the most common known issue.
Is the battery consumption less?
Not much for usual usage, I suppose much if you play 3D games.
There is another topic I don't remember where speaking about this.
When set to 4k, the phone app no longer goes. g8141
Used this mod for over a week I sometimes get like a fpash of white light kind of flickering on.screen
Shellyaffff said:
Used this mod for over a week I sometimes get like a fpash of white light kind of flickering on.screen
Click to expand...
Click to collapse
You mean during the resizing ?
Get the screen flashing light and dark like screens messed when it's not though works perfectly. Then suddenly get flickering
Wow looks like weird...
What definition are you using ?
As described looks like a screen issue of your phone.. It happens in 1080p too ?
I saw that the best dpi on the 4k resolution without crashing any app wasn't 807 but 706, 720 or 721, I don't remember exactly sorry
This app do the same job like adb command (wm resolution 2160x3840)?
simondd said:
This app do the same job like adb command (wm resolution 2160x3840)?
Click to expand...
Click to collapse
As far as I know, it does the exact same thing as the ADB command (except through an app).
It said that the newest file couldn't be found (error: 410)?
I tried the older version (1.1) And the program doesn't seem to do anything, is there a way to check?
The whites looks yellowish, like warmer tone. reading mode is off. I got phone this yesterday.
MIUI Global 12.5.6
My last phone was Redmi K30, and this is my first amoled sceen phone.
Was it like that out of the box?
If so it may be a firmware or hardware issue.
If not, 3rd party app like a book reader.
Is "Adaptive Colors" off in Color Scheme Settings?
If yes.. maybe refund/replace your phone, if it's a hardware problem...
Can you take a picture of the device showing the yellow tint? It definitely doesn't sound normal, but could be a software issue
Zinnz said:
Can you take a picture of the device showing the yellow tint? It definitely doesn't sound normal, but could be a software issue
Click to expand...
Click to collapse
the picture can't show the issue, but it is like you set the color temperature to warm or turning on night light/reading mode.
dreamytom said:
Is "Adaptive Colors" off in Color Scheme Settings?
If yes.. maybe refund/replace your phone, if it's a hardware problem...
Click to expand...
Click to collapse
it is off. temperature is at default, and setting it to cool didn't fix it either. I guess I'll ask for a replacement.
If you are talking about white looking yellowish; here's what to do:
1- Go to settings > display > colour scheme
2 - Choose advanced settings
3 - Choose enhanced
4- Go to R (red) set it to about 75% and G (green) to 75% as well - Leave blue at a 100%
5- Reduce both value and contrast by about 5-10% ( just a lite slide )
6- Set Gamma to 0% ( slide it all the way to the left)
7- Save changed and report back the difference.
It's 6am, and screen is slowly reducing the yellow tint. look like this have scheduled reading mode, even though I have it disabled.
Turns out the night mode configuration was from my previous device and restored by google to my new poco f3.
I used SystemUI Tuner to disable the hidden night mode settings.
azeunkn0wn said:
Turns out the night mode configuration was from my previous device and restored by google to my new poco f3.
I used SystemUI Tuner to disable the hidden night mode settings.
Click to expand...
Click to collapse
Hi! I got my Poco F3 yesterday and currently encountering the same problem. I've already downloaded SystemUI tuner and enabled ADB. But where can I turn off this hidden night mode?
Bl4Ck R34Ct0r said:
If you are talking about white looking yellowish; here's what to do:
1- Go to settings > display > colour scheme
2 - Choose advanced settings
3 - Choose enhanced
4- Go to R (red) set it to about 75% and G (green) to 75% as well - Leave blue at a 100%
5- Reduce both value and contrast by about 5-10% ( just a lite slide )
6- Set Gamma to 0% ( slide it all the way to the left)
7- Save changed and report back the difference.
Click to expand...
Click to collapse
Unbelievable, it's really better, white is white.
I just bought this phone, is it a hardware defect ? (should I return it?)
shana1199 said:
Hi! I got my Poco F3 yesterday and currently encountering the same problem. I've already downloaded SystemUI tuner and enabled ADB. But where can I turn off this hidden night mode?
Click to expand...
Click to collapse
I had this problem too, what @azeunkn0wn suggested worked for me (when the screen turned yellow at night)
Without root:
1. Enable ADB like this in the developer option
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2. Reboot the phone to apply the changes
3. Disable night display option with the commands:
- adb shell settings put secure night_display_activated 0
- adb shell settings put secure night_display_auto_mode 0
4. Reboot the phone to apply the changes
And it should be good
Note: if it doesn't work, check also:
Settings - Accessibility - Vision - Color correction - Off
_________
source:
1. https://github.com/appium/appium/issues/13802#issuecomment-587802222
3. https://forum.xda-developers.com/t/...-rootless-and-magisk-o.4130793/#post-83021395
Note: https://c.mi.com/thread-3558799-1-0.html Answer #2
Waitamin said:
Unbelievable, it's really better, white is white.
I just bought this phone, is it a hardware defect ? (should I return it?)
Click to expand...
Click to collapse
I didn't return mine, tweaking it made a huge difference and am happy with it.
cyanGalaxy said:
Is "Adaptive Colors" off in Color Scheme Settings?
If yes.. maybe refund/replace your phone, if it's a hardware problem...
Click to expand...
Click to collapse
i disable adaptive color and yellow tint gone,
thank u very much