Issue:
No BT call.
Broken audio in VOIP (viber,skype,teamspeak etc). Tinyalsa would fix that, but it breaks calls.
Mic key (voice search) works, you need to enable: settings -> system -> hardware keys -> enable custom actions (check) and app switch set to voice search.
To get home key logn press action: settings -> system -> hardware keys -> enable custom actions (check) and home key (long press) set to Recent app switcher
When you upgrade, phone app may not work, you must remove the shourtcut, and readd. (thanks scotte9999)
Sometimes it stuck boot logo (cm,samsung,roger), please remove the battery and wait atleast 5 minutes,
Offline charger, you can leave with removing charger and holding power button for 2 sec, and glide will boot.
Liblight works very simple, when your lcd birghtness low buttons and keyboard light is on. You can use qwertyled or other liblight,read more.
Slow storage performance in some apps.
download
http://dualhoki.vim.hu/bubor/dev/pac_i927_4.3.Build-1_20140225-111215.zip
http://rpi.bubor.hu/bubor/dev/pac_i927_4.3.Build-1_20140225-111215.zip
changelog
20130912: phone encrypt support
20130913: BT LPM support, overclock support
20130921: PACMAN update
20130925: camera and charger
20131002: www/com key fix
20131007: PACMAN update
20131018: keyboard arrow fix
20131028: vibration intesity
20140102: just PACMAN update
20140225: just PACMAN update, I havent tested.
install
factory default
install zip
gapps included in my zip file, you dont need to install any gapps
reserved
can´t swap SDCards
edit /sysrem/build.prob and add:
Code:
# Change to 1 for swapping SD cards
persist.sys.vold.switchexternal=1
below
Code:
# Storage configuration
ro.vold.switchablepair=/storage/sdcard0,/storage/sdcard1
You can use recovery installable zip: http://dualhoki.vim.hu/bubor/dev/swap-internalsd-externelsd.zip
gyroscope fix
power off the phone (better remove battery for sure), put on a desk, power on and wait, it shoud calibrate itself.
Credits:
* tonyp https://github.com/tonyp/android_vendor_google
* Epsylon3 https://github.com/tpruvot/android_device_samsung_i9103
* kick buttowski
* Adam77Root
* yohan4ws
* gtmaster303
* The-Covenant team
* dman3285
* thegreatergood
* spyke555
yippppy downloading right now
thanks bubor, looks great
How do I make the keyboard lights work ?
---------- Post added at 03:18 AM ---------- Previous post was at 03:14 AM ----------
greeneyez15o said:
How do I make the keyboard lights work ?
Click to expand...
Click to collapse
nvmd
Do I need to download gapps for this? Or is it included?
Kombatant said:
Do I need to download gapps for this? Or is it included?
Click to expand...
Click to collapse
included, original gapps doesnt compatible with tegra2 devices.
Thanks for the quick reply man, flashing as we speak; haven't updated my ROM in ages Will report back any findings.
edit: Apart from some text to speech crashes, everything's peachy so far
so far so good gooodwork!
flashed, no problem so far (except the known issues). No lag wake or delayed-until-wake SMS seen, but i've just flashed the ROM for 12 hours so I can say that they are reduced, but i'm not sure if they are fixed or not. I prefer the old style quick setting button, but this is good tho
Wow, I was surprised at how functional this was for how new the thread is.Everything I've tried has worked with no issue (basic functions, data, a2dp bluetooth, sd card, wifi, gps). going to try and Wifi tether and actually trying to use the "phone" functins when I get a chance.
One thing so far, I don't think this has been said, is that the recents takes forever to pop up (like 6-7 seconds!). I tried remapping it away from the home button, but it still didn't speed up.
Also, where do I customise those handy shortcuts in the recents? and wtf is a ribbon?
it looks like there's some problem with the WiFi toggling.
Action: pressing the WiFi button on quick setting panel and the quick pulldown menu
Expected result: the button flipped and show the new icon indicate that the WiFi has been turned on
Actual result: the button flipped, but the icon is still the old one (it's the icon when WiFi is off)
I tried going to setting and press the WiFi button, it switched from "Off" to "On" and stayed there for about 10 seconds, then switched bak to "Off" again.
It's pretty rare 'cause I only met this twice after 2 days using, a reboot will solve the problem.
Tyfighter said:
Wow, I was surprised at how functional this was for how new the thread is.
Click to expand...
Click to collapse
Seconded and signed, this is a quality release from the get go. Cheers man!
Question for you, since I am currently running PAC do I need to do a complete wipe/reset prior to flashing this update?
PghSportsGuy said:
Question for you, since I am currently running PAC do I need to do a complete wipe/reset prior to flashing this update?
Click to expand...
Click to collapse
better, but not must.
Phone app changed, so you must remove shortcuts and readd.
Bug: when you try to use the navbar widgets, the system UI get crash.
Sent from my SGH-I927 using xda app-developers app
Today I got a lot of "Cell Broadcasts" messages, contents are unreadable (only weird symbols), this ended after a reboot, anyone ?
BTW, when plugin in the charger while the phone is off it displays a charging icon (a circle with a battery), normally it will automatically turns on the phone when the battery reaches - let's say - 15%. But to this ROM it doesn't, I have to do a manual reboot.
hi
help
I can not download apps from google play
expl:
facebook could not be download due to an error. (error retrieving information from server . [RPC:S-5:AEC-0])
dadashi.reza said:
hi
help
I can not download apps from google play
expl:
facebook could not be download due to an error. (error retrieving information from server . [RPC:S-5:AEC-0])
Click to expand...
Click to collapse
did you do full wipe install?
bubor said:
did you do full wipe install?
Click to expand...
Click to collapse
yes dear bubor...
I had to flash 4.2.2
4.3 rom after reset stay on rogers logo
A strange thing happened yesterday. My phone OP3 was idle for few hours. When i picked it up, i saw that it had shutdown. On restarting it, I noticed that few of my settings had changed as below
Buttons swap : I had enabled it, but was disabled
Sound: Section System (Touch Sounds, Dial pad tones screen locking sounds) had been enabled from earlier disabled state
Gestures: All gestures disabled
I see no new notifications
I cant pull down the notification panel/tray. only see one line of shortcuts
Developer options menu is present but when i click it, I get message "Developer options are not enabled for this user"
My power long press options were reset to default (without recovery).
I cleared cache from recovery/launcher (oneplus) yet #4,#5,#6 are not fixed.
I found similar problem with solution for marshmallow but it doesnt work for me. http://forums.androidcentral.com/sa...ton-settings-button-dnt-work.html#post5083902
Last option would be a factory reset. Anyone faced similar issue?
PS: I had clean installed OB9 and then OB10 OTA with stock recovery.
Hello,
I have a weird problem with my phone. Few days ago I've drained my battery and swapped it to the fresh one. But after phone booted up everything is broken.
My wallpaper changed to the one i don't know, it even doesn't look like stock one (Screenshot 1).
Notifications doesn't show up. Probably because upper drawer doesn't work now as well (i can slide it down only once, to show me date. But can't slide it down further to change sound profile, wi-fi etc. Screenshot 2).
Home button doesn't work, square button (the one for switching between applications) doesn't work either.
Half of the settings got reset to factory, some of them stayed unchanged but doesn't work anymore. For example, I've had my lock screen protected by pin. It still shows in the settings that I've set pin code, but there is no actual pin lock when I'm locking my phone (Screenshot 3).
Developer options menu says that they "are not available for this user" (Screenshot 4).
Even my QuickCircle case doesn't work anymore.
I have F400L one with Fulmics ROM 7.6 (6.0 Android).
I've tried to dirty flash it (i was on Fulmics 7.5 before). But after flashing new version of ROM everything still the same.
I've tried to wipe Dalvik + Cache, no luck either.
I don't want to do a full wipe, it will be a huge pain it the ass to reinstall and reconfigure all of my apps. Especially ones like Google Authenticator.
Dear community, do you have any suggestions what happened and how i may fix it?
UPDATE:
Found same problem: https://plus.google.com/u/0/+PaulOBrien/posts/8EGNvpY9jQa
Solution is to type this command (through adb or terminal):
am start -n com.google.android.setupwizard/.SetupWizardTestActivity
At this moment, this command resolved probably all of issues occured.
Hi,
I'm running a current Stock-ROM on my OP3, as provided by OnePlus OTA, never flashed something else. Just using the phone out of the box.
Yesterday, I deleted some cache data to free some space on my 99% filled up phone. Then I opened the gallery but not all thumbnails appeared and then it stucked completely. I holded the power button and it switched off. Now when turning the phone on a message appeared saying:
"The dm-verity is not started in enforcing mode"
After a few seconds it changes to the 3 animated points and this never ends. All I can do is switching it off, starting recovery mode or fast mode again with the same behaviour. I tried to connect it with my PC (W10) but it is not showing up.
How can I fix this problem without loosing my data especially my pictures and personal folders. How can I backup my data? I can still see them in recovery mode but how to access them and copy them? I could live with resetting the phone losing all settings and apps, but not my files.
What is your suggestion? Thanks in advance.
Ok, I just tapped on "Reset system setting", lost all apps and settings but it starts again and all my files are still there. Problem solved.
Hello all, I have a weird bug after accepting the OTA to Android 10 two days ago. I noticed that the UI is stuck in immersive mode, meaning the nav bar and status bar disappear after a second or two. I am rooted but have not modified any system files. Went into Custom Restrictions and made sure that there was nothing checked. Not sure what else could be causing this or is there a setting somewhere that I am not finding. I toggled gestures back to 3-button and that didn't do anything either. Thanks
I managed to fix it...
Not sure how or what caused this command to be executed but "settings put global policy_control immersive.full=*" was enabled, had to rerun it without the *
For anybody curious,
https://android.gadgethacks.com/how...-auto-hide-your-pixels-software-keys-0176242/
Thanks