Any way to stop this.. I used the registry to stop it from waking up due to my magnetic case.. i have the notifications to make a noise and flash the led... i dont want it to come out of standby to tell me about an upcoming appt (the dismiss/snooze notice) cause i keep pocket running apps or pocket dialing my sense 2.5 front shortcuts!
ANY HELP would be greatly appreciated!
mrwebsmith said:
Any way to stop this.. I used the registry to stop it from waking up due to my magnetic case.. i have the notifications to make a noise and flash the led... i dont want it to come out of standby to tell me about an upcoming appt (the dismiss/snooze notice) cause i keep pocket running apps or pocket dialing my sense 2.5 front shortcuts!
ANY HELP would be greatly appreciated!
Click to expand...
Click to collapse
Try this: Start > Settings > Sounds & Notifications > Notifications > Event: Reminders > uncheck "Display message on screen."
I hope that solves the problem!
thanks! i will try that and get back to you
UPDATE: damn... this doesnt work... for "reminders" in settings/notifications i only have flash light, play sound, and vibrate selected and the screen/phone wakes up/resumes and if it had been in my pocket or whatever i'd be calling people.. any other ideas?
mrwebsmith said:
thanks! i will try that and get back to you
UPDATE: damn... this doesnt work... for "reminders" in settings/notifications i only have flash light, play sound, and vibrate selected and the screen/phone wakes up/resumes and if it had been in my pocket or whatever i'd be calling people.. any other ideas?
Click to expand...
Click to collapse
Sorry about that. I just noticed myself right now that my phone woke up for a reminder.
Hmm... I don't know, but I think you should get a working screenlocker. I use TouchLockPro (now you can use your zoombar as an unlock bar). I set it up so that when the screen wakes, the phone instantly locks.
If you decide to use TouchLockPro, the settings are a little hard to understand (I followed the Settings instructions in the developer's website). If you need help with the settings, or if you want an example of my settings, feel free to PM me.
try this ..
warlock...thanks for that cab.. but it didnt work...at least not for calendar reminders.. i will test it on txt msgs as that would help as well
sumflipnol: thanks.. i guess i will have to look into screen locks.. its just annoying cause im fine with the "screen lock except for power button" behavior of winmo.. but if it could just stay asleep for the reminders (other than the sound/led/vibrate options) it'd be perfect
ill let you know if that locking program works out for me
hold down the end button
locks the screen wont but dial or open apps when the screen wakes up
cirrob said:
locks the screen wont but dial or open apps when the screen wakes up
Click to expand...
Click to collapse
I believe you're referring to the default Windows Mobile SmartLock (auto-lock). I have that on my phone, and it's not very reliable. My phone sometimes wakes up on my desk, and I notice that Sense2.5 is active (SmartLock obviously failed to auto-launch the WM screenlock). From my week-long experience with TouchLockPro, the screen locks immediately without that small lag, and it's very consistent.
There must be a way!
I'd like to ressurrect this thread to see if anyone has any further ideas.
I also prefer to just use the power-button method of putting my phone into standby rather than mess around with screen locks or anything.
I've disabled wake-up-on-SMS. But it still wakes up whenever there's a reminder for an appointment.
Surely there's a way to stop this behaviour!....
It's an open question, so far...
As many of you, I would like to disable the device wake up for reminders. Same as you, I just want the sound and / or light notification for them.
I've been searching WEB, all XDA forum and my phone registry but I haven't found anything useful for reminders, just for SMS.
The same issue has been posted in other places (for example, http://forum.xda-developers.com/showthread.php?t=615633) but there's no final answer yet.
Definitely, lock screen is not enough, because if the device wakes up and the screen turns on, it can keep on for a long time (caused by the screen being pressed because the phone movement inside the pocket) and battery drains very fast.
Hey guys.
I just contacted Motorola to request some new features be added to the stock ROM (which in my opinion) would be crucial to increasing the functionality and battery levels of the watch.
Don't know if any Motorola Dev's/Engineers are following this site but just in case, I'd love to have these features asap.
Please add more if there is anything I have missed.
1. Have the ability to turn Vibrate OFF while still receiving notifications on the watch
Why ? Because I have my phone in my pocket constantly, and my phone vibrates when a new notification comes up. I dont need my pocket and my wrist vibrating together.
Also, Increase battery life.
2. Need to have the ability to turn off notifications for certain apps. For Example, I want the watch to vibrate when an SMS or Email comes through, but turned off for Messenger, kik, and everything else.
Also, by having this feature, Im sure a developer could write up a small app to install onto the phone which would tell the watch which notifications to vibrate for, and which to just display on the screen.
And again, this will save battery life by turning the vibrate motor off for (in my case) 90% of the notifications coming through.
3. Have a slider to control the level of vibration or the burst of vibration.
Why ? This adds a level of customization to the watch.
Also, I see people complaining that the watch doesn't vibrate enough while in my case, its vibration time is too long. By having the ability to shortening the vibrate time, you also save battery life (if not by much).
By having all 3 features embedded into the ROM, On the average user, it should increase battery life by almost double (if not more).
TRLOS said:
Hey guys.
I just contacted Motorola to request some new features be added to the stock ROM (which in my opinion) would be crucial to increasing the functionality and battery levels of the watch.
Don't know if any Motorola Dev's/Engineers are following this site but just in case, I'd love to have these features asap.
Please add more if there is anything I have missed.
1. Have the ability to turn Vibrate OFF while still receiving notifications on the watch
Why ? Because I have my phone in my pocket constantly, and my phone vibrates when a new notification comes up. I dont need my pocket and my wrist vibrating together.
Also, Increase battery life.
2. Need to have the ability to turn off notifications for certain apps. For Example, I want the watch to vibrate when an SMS or Email comes through, but turned off for Messenger, kik, and everything else.
Also, by having this feature, Im sure a developer could write up a small app to install onto the phone which would tell the watch which notifications to vibrate for, and which to just display on the screen.
And again, this will save battery life by turning the vibrate motor off for (in my case) 90% of the notifications coming through.
3. Have a slider to control the level of vibration or the burst of vibration.
Why ? This adds a level of customization to the watch.
Also, I see people complaining that the watch doesn't vibrate enough while in my case, its vibration time is too long. By having the ability to shortening the vibrate time, you also save battery life (if not by much).
By having all 3 features embedded into the ROM, On the average user, it should increase battery life by almost double (if not more).
Click to expand...
Click to collapse
Pretty neat ideas. I have one id like to add lol. I want to be able to turn off motion detection for the screen. I had this feature on my galaxy gear and it gave me an day and half EXTRA battery with it turned off. We could get similar battery life (3-4 days with average use,custom rom too) if this was disabled. I had to always press the button to turn the screen on to check the time, but notifications still lit the screen up when they came in. Totally worth an extra 24-36 hours of battery . However i like the idea of being able to tap the screen to wake the moto360.
So basically I want motion detection disabled but leave tap to wake on.
Can't you turn off notifications for certain apps in the Android Wear app (mute apps)?
HuStLaZ said:
Can't you turn off notifications for certain apps in the Android Wear app (mute apps)?
Click to expand...
Click to collapse
Im not talking about turning off notifications all together.
I was talking about turning off the vibration for certain apps, but still having the notifications pushed to the Moto360 display.
Number 2 can already be done you can go to the Android Wear App in Setting Click Block App Notification then Pick Whatever App u want to mute
Oops didn't see the last comment
kingcliff00 said:
Number 2 can already be done you can go to the Android Wear App in Setting Click Block App Notification then Pick Whatever App u want to mute
Oops didn't see the last comment
Click to expand...
Click to collapse
Lol
Already found that setting.
Not what I was looking for. lol.
anthonyg45157 said:
Pretty neat ideas. I have one id like to add lol. I want to be able to turn off motion detection for the screen. I had this feature on my galaxy gear and it gave me an day and half EXTRA battery with it turned off. We could get similar battery life (3-4 days with average use,custom rom too) if this was disabled. I had to always press the button to turn the screen on to check the time, but notifications still lit the screen up when they came in. Totally worth an extra 24-36 hours of battery . However i like the idea of being able to tap the screen to wake the moto360.
So basically I want motion detection disabled but leave tap to wake on.
Click to expand...
Click to collapse
I like this idea because sometimes it's hard getting the watch to light up with motion, so turning off that feature for when it does work would be fine.
In my case, I have the phone vibration turned off and rely on the watch to deliver notifications.
My one and only important feature request is the ability to create my own canned response list.
Of course, official support for 3rd party keyboards would be nice as well.
Bluetooth LE Peripheral Mode
I'm not sure if they intend to include Bluetooth LE Peripheral Mode in their Lollipop release. Google chose not to include peripheral mode for the Nexus 5 and Nexus 7, although it is included with the newer Nexus 6 and 9. But for Android Wear, Peripheral Mode would enable a huge number of new and useful apps, that would significantly improve the usefulness of the watch. The simplest one would be a beacon to help you find your watch when you forgot where you left it, but enabling service solicitation would open a whole new world of applications for the watch.
#1 has worked since day one.
I get a notification, my phone remains silent, the watch vibrates. It's in the AW app settings.
according to me, since the watch has a inbuilt mic, a feature can be added that when someone calls, answer from the watch, just speak that you'll call back later & disconnect. this will be helpful if you are driving... no need to pick the phone ...
pratik_193 said:
according to me, since the watch has a inbuilt mic, a feature can be added that when someone calls, answer from the watch, just speak that you'll call back later & disconnect. this will be helpful if you are driving... no need to pick the phone ...
Click to expand...
Click to collapse
Instead of swiping to answer the call, You can just swipe upwards to reject call with similar messages sent automatically
Sent from my SM-N910C using Tapatalk 2
Good list, I have one more. Allow the setting of alarms for only certain days. For example, I would like to be able to set an alarm at 7 PM that goes off only on weekdays and not weekends, as I use this to let me know when I can get into the car pool lane when I am driving back home from work. That alarm is useless on the weekend, so no need for it to be turned on every day.
apgrovas said:
Good list, I have one more. Allow the setting of alarms for only certain days. For example, I would like to be able to set an alarm at 7 PM that goes off only on weekdays and not weekends, as I use this to let me know when I can get into the car pool lane when I am driving back home from work. That alarm is useless on the weekend, so no need for it to be turned on every day.
Click to expand...
Click to collapse
Just select the days you would in alarm setup, do not check saturday and sunday
I am still wondering which watch support Bluetooth peripheral?
As I know LG G watch 5.0.1 do not support it.
if (mBluetoothAdapter.isMultipleAdvertisementSupported()) {
will return false.
on mine the whole notification thing is messed up..
sometimes it will vibrate and pop up when i get a text or email.. but then sometimes it doesnt do anything at all.
hardly ever, does it vibrate when i get a fb IM.. but it pops up and the screen lights up.
maybe they should fix it first before adding anything.
anthonyg45157 said:
Pretty neat ideas. I have one id like to add lol. I want to be able to turn off motion detection for the screen. I had this feature on my galaxy gear and it gave me an day and half EXTRA battery with it turned off. We could get similar battery life (3-4 days with average use,custom rom too) if this was disabled. I had to always press the button to turn the screen on to check the time, but notifications still lit the screen up when they came in. Totally worth an extra 24-36 hours of battery . However i like the idea of being able to tap the screen to wake the moto360.
So basically I want motion detection disabled but leave tap to wake on.
Click to expand...
Click to collapse
Quoting myself because my wish came true!! Props to moto
---------- Post added at 07:58 PM ---------- Previous post was at 07:52 PM ----------
aarons6 said:
on mine the whole notification thing is messed up..
sometimes it will vibrate and pop up when i get a text or email.. but then sometimes it doesnt do anything at all.
hardly ever, does it vibrate when i get a fb IM.. but it pops up and the screen lights up.
maybe they should fix it first before adding anything.
Click to expand...
Click to collapse
Pretty sure vibration is app dependent. Example, 8sms. You can change the vibration length in the settings. If you set your phone to 1000ms vibration when you get a text your phone AND watch will vibrate for 1000ms(or whatever vibration pattern you set) To further my point I would NEVER feel the vibration of Snapchat updates because it was so short. I'm using xposed(gravity box) to change snapchats vibration length and I feel the notification on my watch and phone every time.
I agree 100% google should have a universal setting to be able to change vibration,notification, and screen light up settings.
anthonyg45157 said:
Quoting myself because my wish came true!! Props to moto
Click to expand...
Click to collapse
OK, so how do you turn off the auto-on option?
GuyInDogSuit said:
OK, so how do you turn off the auto-on option?
Click to expand...
Click to collapse
Have some of you even checked all options in the android wear app? let alone even opened it? seriously start looking around and you'll find it.
goa200 said:
Have some of you even checked all options in the android wear app? let alone even opened it? seriously start looking around and you'll find it.
Click to expand...
Click to collapse
I have.
Every once in awhile, my notifications pull-down won't pull down.
If I lock the phone, then unlock it, the pull-down starts working again.
It's been like this through multiple clean OS re-installs.
Am on Magisk 17.3.
I've had more software bugs on the PXL3 than any other phone before, including the PXL1.
I have the same damn problem. It just doesn't work all the time. I also had the issue of bright white screen on double tap to wake. So, I called Google Support for this, and the guy on the other said made me clear the cache of the phone app, force stop it, turn the phone off for 2 mins and then restart for both issues. I even asked him how this relates to the fingerprint sensor not detecting, he replied some stuff that, phone app controls the vibration and the display waking up.
Of course both problems does not occur for me frequently, so after that procedure I did not encounter the white screen problem, but fingerprint gestures were still kinda hit and miss. Although they work pretty good now, less miss count. For me they work when I swipe just the edge of index finger lightly, also if finger is very dry, it doesn't detect.
I tried the pulldown five times while this logcat was running.
I'm on Nova Launcher but think it happened on stock launcher too.
If I am reading on my phone and a call comes in I don't get any visual popup to answer or decline. The phone rings but I have to pull down the notification bar in order to answer.
I usually keep do not disturb on at all times with only favorites allowed through so don't know if it's the problem or something else is.
For example, if one of my kids calls I hear it ring but I have to search/ take extra steps in order to answer the call.
This only seems to happen with the screen on. I believe it works fine when screen is off.
How do I fix this?
Any help would be appreciated.
reaper36 said:
If I am reading on my phone and a call comes in I don't get any visual popup to answer or decline. The phone rings but I have to pull down the notification bar in order to answer.
I usually keep do not disturb on at all times with only favorites allowed through so don't know if it's the problem or something else is.
For example, if one of my kids calls I hear it ring but I have to search/ take extra steps in order to answer the call.
This only seems to happen with the screen on. I believe it works fine when screen is off.
How do I fix this?
Any help would be appreciated.
Click to expand...
Click to collapse
It's in phone settings. See my screenshots.
Mr. Orange 645 said:
It's in phone settings. See my screenshots.
Click to expand...
Click to collapse
Thanks. I actually already had that setting checked.
I ended up finding another setting that seems to have fixed it. Can't remember where I found it but as long as it's working........
Glad you found it, had the same problem and I think I found the setting you did. For anyone else with this problem, in the Do Not Disturb setting, under Hide Notifications, there are settings that can be toggled for both screen on and screen off situations. Adjusting these should fix the issues.
Cheers,