Hello everyone,
I am facing issues with downloading the updates on my galaxy watch. I do see that there was a latest update rolled out by Samsung in few region on December 10th. However, I have not even been able to download the previous update released sometime in June. On checking for updates it just doesn't show anything at tall and sometimes prompts me to check with the bluetooth settings. Can someone tell me if I can manually download the latest update viz. R810XXU1DSL1 and install through ODIN. If that is even possible can someone share the post which shows the steps to follow as well.
Thanks
Apologies if this is a repetitive post, wasn't able to find this query on any of the threads.
Regards,
Chandrahas Sampat
1.
Can you enter this Code and write your infos about Firmware Version on your Device:
Code:
*#1234#
2.
netOdin and some infos and videos are here:
https://forum.xda-developers.com/showpost.php?p=73503787&postcount=150
3.
DSL1 Version is here:
https://forum.xda-developers.com/showpost.php?p=81261659&postcount=133
Choose correct file for your Model...
Best Regards
Related
Hi All,
I've been following this prodigious forum for a long time, and, like many of us, i'm trying to change the default CSC of my galaxy watch 42 LTE.
I followed the procedure via SBD, formally it was successful, but like many of us, the watch did not show the list of countries.
So... this is the idea:
downgrade to first firmware via NetODIN (should be R815FXXU1CRK7), than use the SBD procedure in order to select my CSC (that should go on first firmware) then I proceed via OTA to update the latest available firmware.
This is my actual watch configuration:
AP: R815FXXU1FSL3
CP: R815FXXU1FSL3
CSC: R815FOXA1FSL3
Stock firmware I'm searching for: R815FXXU1CRK7
Should be a Europe free operatore device from DBT, desire to switch to ITV.
... and this is the issue:
I tried quite a lot but I still haven't been able to find the first firmware with which the watch was born, also on the XDA forum, but for the R815F version there doesn't seem to be my specific firmware ... could you help me?
In your opinion could it work this solution? Thanks for the contributions, so as to help the many of us who have the 42 LTE - R815F version.
Thank you,
Strategia
I dig up the subject, I have the same model and in 2 years I only received an update, I live in France but I received it with the csc oxa. I have the exact same firmware as you. And I never received an update.
Hi,
I got SGWA1 SM-R500 already with the following SW versions:
Tizen 4.0.0.7
One UI 1.5
SW: R500XXU1DSL1 / SM-R500NZDAXEZ
Knox: 2.4.0
SE for Tizen: 2.0.0
TIMA: 3.0.0
I searched a lot in this forum for the last 3 days but wasn't able to find all answers I'm searching for. So I would really appreciate if someone can give me a complete set of answers:
I want to use Samsung Pay, which is not available in my region - the Czech Republic. I understood that I need to change the region and probably it will be more complicated because of newest firmware version.
So:
What is the best region for the most up-to-date FW version with possibly all functionality. XAR-USA?
How do I do it? How do I change my region? Downgrade to ASAD version or trying to fiddle with "combination FW"?
Is there a way how to change the region but still receive future OTA or once I flash the firmware with Odin, there is no way back to OTA?
PLEASE, if possible try to describe all steps as detailed as possible.
Thanks a lot, this forum and people here are truly giving our devices superpowers!
I am interested too, how to change region on 4.0.0.7?
I have a little problem with my active 1 after the battery change there was an automatic update in which in the middle of the process the battery ran out and I entered the booting mode and did the recovery then my watch is out of firmware can someone help me please
Hello everybody!
I need the firmware R805FXXU1ESI1 to downgrade and change the CSC of my Galaxy Watch, but unfortunately I only find it in Easy-firmware, and I don't have an account there:
R805FXXU1ESI1 Tizen 3File | Easy Firmware
easy-firmware.com
I need this version exactly, because my region is ZTO and I need this base firmware (OWO).
Thank you very much in advance.
Hi, Maybe some info in this thread ...
New update sm-r805f
Hello NEW UPDATE FOR R805F To update with netOdin see here how to do it https://forum.xda-developers.com/showthread.php?p=78800094 EF FILE EXTRACTOR https://mega.nz/file/40NQ3YaL#JL5cq46ErZFoSFB-fxMmOsKBd44VDcMgUtOl8Ji8hrA 0. This process...
forum.xda-developers.com
I'm planning to downgrade too to activate samsung pay somehow. (EU region) I'll keep searching to see what can be done.
galaxys said:
Hi, Maybe some info in this thread ...
New update sm-r805f
Hello NEW UPDATE FOR R805F To update with netOdin see here how to do it https://forum.xda-developers.com/showthread.php?p=78800094 EF FILE EXTRACTOR https://mega.nz/file/40NQ3YaL#JL5cq46ErZFoSFB-fxMmOsKBd44VDcMgUtOl8Ji8hrA 0. This process...
forum.xda-developers.com
Click to expand...
Click to collapse
As per my understanding, I have to follow these steps:
1. Flash combinational firmware
2. Change CSC using SDB commands
3. Flash stock firmware
4. Install samsung pay
5. Repeat steps 1-3 to change CSC back to the original so that i retain mobile connectivity
@galaxys I have the same watch model but with Tizen 5.5. Would the same old firmware work with my watch also?
salwan.hemant said:
As per my understanding, I have to follow these steps:
1. Flash combinational firmware
2. Change CSC using SDB commands
3. Flash stock firmware
4. Install samsung pay
5. Repeat steps 1-3 to change CSC back to the original so that i retain mobile connectivity
@galaxys I have the same watch model but with Tizen 5.5. Would the same old firmware work with my watch also?
Click to expand...
Click to collapse
Hi, I don't think it would work with Tizen 5.5 but haven't heard of anyone trying it....
galaxys said:
Hi, I don't think it would work with Tizen 5.5 but haven't heard of anyone trying it....
Click to expand...
Click to collapse
Thanks for your early reply otherwise i was thinking of giving it a try.
BTW i found that dialing *#272*IMEI# also change the CSC but did not try because people here are going for flashing firmware due to some reason only. Do you know why shouldn't it work on galaxy watch?
salwan.hemant said:
Thanks for your early reply otherwise i was thinking of giving it a try.
BTW i found that dialing *#272*IMEI# also change the CSC but did not try because people here are going for flashing firmware due to some reason only. Do you know why shouldn't it work on galaxy watch?
Click to expand...
Click to collapse
It may be a Samsung thing for not working, but haven't played with changing CSC...
@galaxys @adfree I could not find Tizen 5.5.0.1 firmware for SM-R805F anywhere on the internet. It was released on 15th march 2021.
Is it not available yet? I am waiting for it...
I unlock My Note 10+ 5g(At&t) SM-N976U from At&t..But it won't give me software update.. It stuck on anroaid 10 one ui 2..and i live in Bangladesh so i can't use At&t for software update..so how can i update my phone to one ui 3 any solution?? Thanks
You won't get automatic updates outside US.
You can download the firmware and flash it yourself using Odin software tool.
There is plenty of threads in this forum that explain the process.
Latest firmware for your model can be found through this thread.
Flashing is well explained here, although it is for another model so don't flash the firmware referenced there.
All at your own risk. Inform yourself well before starting to flash!
OnnoJ said:
You won't get automatic updates outside US.
You can download the firmware and flash it yourself using Odin software tool.
There is plenty of threads in this forum that explain the process.
Latest firmware for your model can be found through this thread.
Flashing is well explained here, although it is for another model so don't flash the firmware referenced there.
All at your own risk. Inform yourself well before starting to flash!
Click to expand...
Click to collapse
Can't Find My phone's model frimware in frija, sammobile,etc etc.. I chaked lot of website but i can't find N976USQU1ASL3 firmware
The first link in my post allows you to find all FWs. You would want the latest U- FW.
Hello guys,
I changed the csc to XAR using sdb and Odin to flash my watch with the older tizen os. And now whenever I try to update my os it tells me that this is the last update found ...
I have the galaxy watch 2018 42 mm model, SM-810
What can I do ?
Thanks in advance,
And best regards,
Alex!
?
Firmware Version on Device?
Easiest way with FULL details... type this code like you would call someone...
*#1234#
Best Regards
Thanks for your fast reply! I somehow managed to have Samsung Pay installed and get the latest Tizen 5.5.0.1 installed! I will share my experience in case someone else is having issues with updating Tizen after downgrading !
Here is how it worked out for me:
First I downgraded my Tizen OS with Odin to the following software:
R810XXU1CSI1 Tizen 4.0.0.4 ( Downloaded from here: https://disk.yandex.ru/d/TPWpD1y1CE6Sig )
Then I used the SDB kit to change my region to XAR. ( You can search how to change the region on your watch in the XDA forum search box ).
Then I googled Samsung Pay watch plug-in apk. ( Downloaded from here: https://www.apkmirror.com/apk/samsung-electronics-co-ltd/samsung-pay-watch-plug-in/ )
Installed it - it showed on my watch and in my Gear App.
So far so good.. but It didnt want to update to Tizen 5. It was stuck on Tizen 4.
So I flashed this firmware with Odin: R810XXU1BSA4 Tizen 4.0.0.1 ( Downloaded from here: https://mega.nz/#!vg8k3AbA!zcUGtSJPzEdo_PKs_8_u0M6evKXfmQysfK4cZHOkJW8 )
And I managed to update the watch with all the updates and Samsung Pay didnt get removed .
P.S. - This is how it worked out FOR ME!! You can try to change the region with the last firmware - it might as well work out for you too !
I hope I helped with my experience. This is firmware only for the SM-R810 watch model! If you flash it on another watch it might get bricked !
And again thanks to @adfree for replying !