Related
Hello community members,
TL;DR no adb, no fastboot, no flashmode, no QDloader (or similar) ... how to unbrick it?
I was trying to force Android to allow lower lcd backlight brightness levels by patching framework-res.apk and I had the edited zip file ready to flash. Then I realized that my Android 7 Ressurection remix ROM (thread) flashed Cyanogenmod recovery, which I don't like. So I decided to reflash TWRP 3.0.2 (link) ( edit: using "fastboot flash boot twrp.img", which was almost fatal mistake) and it has gone almost well. The phone started to boot into recovery mode everytime (and took a long time doing so). So I googled a bit and found this thread which lead me to this thread. I was looking forward to seeing my display brightness at lower than default values, so I probably skipped some security checks and texts with red color, so I flashed the zip with the boot.img replaced. After flashing I chose reboot and nothing happened since.
The problem is I flashed something that was not for my device (extracted boot.img to wrong mmcblk). The command that bricked my phone is (from META-INF/com/google/android/updater-script):
Code:
package_extract_file("boot.img", "/dev/block/mmcblk0p6");
After that it doesn't boot, doesn't light up LED (even when charging), doesn't get detected by PC in any state.
So I have no adb, no fastboot and no flashmode and not even a QDloader or similar mode.
Is there a way to unbrick it?
EDIT: How to unbrick it using JTAG interface? If I find somebody that has the required equipment, what data do I need to give them?
Hey there! Did you manage to solve the issue, because I just got into the same situation after the zip didn't save the corrected partitions but the initial ones... So i ended up without any signs of life in my phone
valkata752 said:
Hey there! Did you manage to solve the issue, because I just got into the same situation after the zip didn't save the corrected partitions but the initial ones... So i ended up without any signs of life in my phone
Click to expand...
Click to collapse
Nope, I found no solution ... even some kind of Qualcomm flashing mode via COM (serial port over USB) does not show up nowhere. I gave up and bought a used S5 mini, which is full of features I appreciate.
I'm gonna keep this Xperia M for some time if some solution comes up.
hi , can you boot into recovery ? ..if yes, i can maybe help
olibub said:
hi , can you boot into recovery ? ..if yes, i can maybe help
Click to expand...
Click to collapse
No, as I said, the phone does not react on anything. I would be able to put it back together if this was possible.
mik13ST said:
No, as I said, the phone does not react on anything. I would be able to put it back together if this was possible.
Click to expand...
Click to collapse
:/ this will be a problem... try look here http://rootmyandroid.org/how-to-unbrick-your-android-device-the-ultimate-guide.html/
and find this article "Unbrick any android device with Once Click Unbrick tool"
mik13ST said:
No, as I said, the phone does not react on anything. I would be able to put it back together if this was possible.
Click to expand...
Click to collapse
can you still access fastboot mode? anyway you need to know first what is exactly partition that you overwrite with boot.img :/
. That was really critical -_-
olibub said:
:/ this will be a problem... try look here http://rootmyandroid.org/how-to-unbrick-your-android-device-the-ultimate-guide.html/
and find this article "Unbrick any android device with Once Click Unbrick tool"
Click to expand...
Click to collapse
Nice looking tutorial, but I cannot find any download link for that One Click Unbrick Tool in that article. I doubt it would work, they are not explaining what it does.
Nicklas Van Dam said:
can you still access fastboot mode? anyway you need to know first what is exactly partition that you overwrite with boot.img :/
. That was really critical -_-
Click to expand...
Click to collapse
No, as I said. The partition that got overwritten was /dev/block/mmcblk0p6. It was overwritten by boot.img from LG OPTIMUS 3D that I link to in the main post.
here you can download unbrick tool https://forum.xda-developers.com/showthread.php?t=1153310
olibub said:
here you can download unbrick tool https://forum.xda-developers.com/showthread.php?t=1153310
Click to expand...
Click to collapse
I don't think this has any chance that it will work.
"This Software:
Will work on all Samsung devices which use Odin3"
Do you know how to use Flashtool?
If so, did you already attempt flashing a ftf via Flashmode (Hold VolDown)?
PhoenixTwoFive said:
Do you know how to use Flashtool?
If so, did you already attempt flashing a ftf via Flashmode (Hold VolDown)?
Click to expand...
Click to collapse
I know what Flashtool is. I know what ftf is. I used it once I think.
But the phone does not boot into flashmode as I mention in the main post.
help, how to get my alioth back from hardbrick / deadphone
alioth already UBL
Buy a new one.
What happened? More details man.
hexisg said:
Buy a new one.
What happened? More details man.
Click to expand...
Click to collapse
failed to flash with fastboot mode, when i was flash it suddenly died completely ;(
Deadley said:
failed to flash with fastboot mode, when i was flash it suddenly died completely ;(
Click to expand...
Click to collapse
Have you unlocked bootloader? What rom did you have and what try to install?
U used Miflash to flash stock rom or what?
We can't help without more exact details. Plug the device in to charge (could've been flashing and run out of battery). Plug into charge for 1hr or so and then try booting into fastboot and connect to PC. Otherwise try booting into EDL mode.
Deadley said:
help, how to get my alioth back from hardbrick / deadphone
alioth already UBL
Click to expand...
Click to collapse
Flash via testpoint. You will need to open your phone cover, service firmware and an authorized account. In other words, you need to go to the service center, pay money and waiting 2-3 days. I ran into this 4 days ago. I received a complete corpse (hard brick) that did not react to anything at all.
I don't really know where to ask this but, has anyone had problems flashing all the way through to stock? I can't seem to get Miflash working properly. So I go through extracting the file. Then go inside, right click on the flash all bat, and run as admin. It goes through the process. But when it gets to flashing 7/9 super sparse, part way through, the fastboot window just goes away and the flash does not finish. I have tried different versions and different tools, but never finishes. Have to flash to Arrow rom or EU rom to get back up and running. Any help would be appreciated. Thanks
bricky23 said:
I don't really know where to ask this but, has anyone had problems flashing all the way through to stock? I can't seem to get Miflash working properly. So I go through extracting the file. Then go inside, right click on the flash all bat, and run as admin. It goes through the process. But when it gets to flashing 7/9 super sparse, part way through, the fastboot window just goes away and the flash does not finish. I have tried different versions and different tools, but never finishes. Have to flash to Arrow rom or EU rom to get back up and running. Any help would be appreciated. Thanks
Click to expand...
Click to collapse
Do you try with another cable?
Maybe the image is corrupted Try redownload the fastboot firmware.
minotavros said:
Have you unlocked bootloader? What rom did you have and what try to install?
Click to expand...
Click to collapse
yes bootloader has been unlocked, from global to EU
hexisg said:
U used Miflash to flash stock rom or what?
Click to expand...
Click to collapse
I used miflash to flash from global to EU
I think it's a flashing error
Robert314 said:
We can't help without more exact details. Plug the device in to charge (could've been flashing and run out of battery). Plug into charge for 1hr or so and then try booting into fastboot and connect to PC. Otherwise try booting into EDL mode.
Click to expand...
Click to collapse
I think it's a flashing error
bricky23 said:
I don't really know where to ask this but, has anyone had problems flashing all the way through to stock? I can't seem to get Miflash working properly. So I go through extracting the file. Then go inside, right click on the flash all bat, and run as admin. It goes through the process. But when it gets to flashing 7/9 super sparse, part way through, the fastboot window just goes away and the flash does not finish. I have tried different versions and different tools, but never finishes. Have to flash to Arrow rom or EU rom to get back up and running. Any help would be appreciated. Thanks
Click to expand...
Click to collapse
but i can't enter fastboot mode, and no twrp is installed
blinoff82 said:
Flash via testpoint. You will need to open your phone cover, service firmware and an authorized account. In other words, you need to go to the service center, pay money and waiting 2-3 days. I ran into this 4 days ago. I received a complete corpse (hard brick) that did not react to anything at all.
Click to expand...
Click to collapse
Has any hardware been replaced? I went to the service center they said they needed to replace the machine
Have you had flash_all and lock selected in MiFlash before flashing Eu from Global?
Deadley said:
Has any hardware been replaced? I went to the service center they said they needed to replace the machine
Click to expand...
Click to collapse
No. Only reflashed via testpoint. It seems to me that they want to deceive you.))
hexisg said:
Have you had flash_all and lock selected in MiFlash before flashing Eu from Global?
Click to expand...
Click to collapse
clean all but keep bootloader unlocked
@blinoff82
How did you bricked yours?
blinoff82 said:
No. Only reflashed via testpoint. It seems to me that they want to deceive you.))
Click to expand...
Click to collapse
I think that's the only way, thank you
Hello, i tried helping my grandmother by installing the global rom on her Xiaomi Mi Pad 5 Pro WIFI, however as it didn't work i tried forcing the rom onto it by flashing it manually using fastboot, after this i am not able to power it on, or reach fastboot. It's just a black screen it doesn't matter how long you hold the power key it's just completely black.. Is there something i can do???? Or is it completely destroyed?
Global ROM is not available for PRO version. Probably you flashed a wrong one. Try flashing back the CN one matches your model.
mkcs said:
Global ROM is not available for PRO version. Probably you flashed a wrong one. Try flashing back the CN one matches your model.
Click to expand...
Click to collapse
Ahh thats the thing, it won't even power on now, i cannot even access fastboot
desyncccccccc said:
Ahh thats the thing, it won't even power on now, i cannot even access fastboot
Click to expand...
Click to collapse
long press "Volume Down" + "Power" for a few seconds at the same time and then release only"Power" once the fastboot logo appears, finally release "Volume Down" to enter the fastboot mode
Its for xiaomi mi5
Maybe helps
Is there anything I can do? Brick help
My Xiaomi mi5 does not turn on. No lights, fastboot is not accessible, resetting it does not do anything. Basically for any combination of buttons that I press, nothing happens and the screen stays black - it is completely dead. However, when I...
forum.xda-developers.com
Keyvannn said:
Its for xiaomi mi5
Maybe helps
Is there anything I can do? Brick help
My Xiaomi mi5 does not turn on. No lights, fastboot is not accessible, resetting it does not do anything. Basically for any combination of buttons that I press, nothing happens and the screen stays black - it is completely dead. However, when I...
forum.xda-developers.com
Click to expand...
Click to collapse
Yeah so the only problem with this is that mine won't even show up even though i have said drivers installed.. I'm starting to think it's hard bricked
Hello, yes same as me. The tablet are in the 9008 edl state when you put it on your computer. there are many flashing tools out there, the problem are the flash authentification from xiaomis side. i prepared a empty pc with windows 10 and loaded the last fastboot image. then i got a telegram contact from a russian guy who was able to use the xiaomi auth procedure, cost me 30 dollar and 3 days to find out this crap
Xiaomi needs a better way to unbrick its devices instead of Authorized Mi Accounts
Xiaomi has locked down the EDL mode on all of its devices, making it nigh impossible to unbrick a device without an Authorized Mi Account. Read on for more!
www.xda-developers.com
desyncccccccc said:
Hello, i tried helping my grandmother by installing the global rom on her Xiaomi Mi Pad 5 Pro WIFI, however as it didn't work i tried forcing the rom onto it by flashing it manually using fastboot, after this i am not able to power it on, or reach fastboot. It's just a black screen it doesn't matter how long you hold the power key it's just completely black.. Is there something i can do???? Or is it completely destroyed?
Click to expand...
Click to collapse
When it's plugged into the PC, is it recognised with "fastboot devices" or "adb devices"?
If it is you should be able to wipe with "fastboot -w" and start again.
Google detailed instructions.
mikefnz said:
When it's plugged into the PC, is it recognised with "fastboot devices" or "adb devices"?
If it is you should be able to wipe with "fastboot -w" and start again.
Google detailed instructions.
Click to expand...
Click to collapse
Unfortunately no, i do not get any response from fastboot whatsoever, there's no device detection in either fastboot or device manager. I even tried on my laptop which is brand new still no sign of life
fritzeman said:
Hello, yes same as me. The tablet are in the 9008 edl state when you put it on your computer. there are many flashing tools out there, the problem are the flash authentification from xiaomis side. i prepared a empty pc with windows 10 and loaded the last fastboot image. then i got a telegram contact from a russian guy who was able to use the xiaomi auth procedure, cost me 30 dollar and 3 days to find out this crap
Click to expand...
Click to collapse
Where would i be able to get in contact with someone like that??
desyncccccccc said:
Unfortunately no, i do not get any response from fastboot whatsoever, there's no device detection in either fastboot or device manager. I even tried on my laptop which is brand new still no sign of life
Click to expand...
Click to collapse
Try different cable & different pc usb slot?
Try flashing using * Xiaomi professional pro tools . Buy credit and all done,
mikefnz said:
Try different cable & different pc usb slot?
Click to expand...
Click to collapse
Unfortunately any cable/pc i try i get the same result, i'm debating wether i should just get a new one for her with global rom instead
desyncccccccc said:
Unfortunately any cable/pc i try i get the same result, i'm debating wether i should just get a new one for her with global rom instead
Click to expand...
Click to collapse
Don't give up yet!
Charge the tablet with another cable that you know works.
Make sure that you have the most up to date version of Platform Tools.
Make sure that when you're in the Command Prompt that you are in the Platform Tools folder.
Check connections with another device....
mikefnz said:
Don't give up yet!
Charge the tablet with another cable that you know works.
Make sure that you have the most up to date version of Platform Tools.
Make sure that when you're in the Command Prompt that you are in the Platform Tools folder.
Check connections with another device....
Click to expand...
Click to collapse
Hello again, i tried with all possible cables and or devices, somehow it still does not show up, i am rather confused and thinking that i might've broke it fully
desyncccccccc said:
Hello again, i tried with all possible cables and or devices, somehow it still does not show up, i am rather confused and thinking that i might've broke it fully
Click to expand...
Click to collapse
Buy an EDL Cable For Qualcomm 9008 Mode for deep flashing
desyncccccccc said:
Hello again, i tried with all possible cables and or devices, somehow it still does not show up, i am rather confused and thinking that i might've broke it fully
Click to expand...
Click to collapse
Have you got the most up to date version of Platform-tools installed and are you checking the connection from a CMD prompt in that Platform-tools folder?
mkcs said:
Buy an EDL Cable For Qualcomm 9008 Mode for deep flashing
Click to expand...
Click to collapse
Could you please link me one of those? I'm over in the EU so maybe they'll be fairly easy to find?
mikefnz said:
Have you got the most up to date version of Platform-tools installed and are you checking the connection from a CMD prompt in that Platform-tools folder?
Click to expand...
Click to collapse
Yeah, i've been doing all of that. I just now found out that there's an EDL cable specifically made for flashing in that mode
Hello, I am a poco f3 user and i've been using this phone for quite a while. till now i never had any problem installing or using custom rom. i was using cr droid and wanted to go for corvus os. after flashing corvus os through twrp my phone never rebooted and device manager showing qualcomm port 9008. after searching i found out i need patched firehose file for no auth flashing but couldn't find any file for poco f3. if anyone could help me with any solution then plz help me. i can't afford online servirces fees cause i'm broke af. so if anyone has any solution then plz help me
how did you manage to put it on QCOM mode? wrong custom rom flashed?
fireclouu said:
how did you manage to put it on QCOM mode? wrong custom rom flashed?
Click to expand...
Click to collapse
at first i was able to go into fastboot mood. then with miflash tool i tried to flash the firmwere but antirollback error given. then i left the phone in that fastboot mood for a while. some times after the screeen was black and i tried to boot into fastboot but nothing happened. so when i plugged it with pc the qcom port notification appered and after searching i found out that my phone was in edl mood
Zaman6234 said:
at first i was able to go into fastboot mood. then with miflash tool i tried to flash the firmwere but antirollback error given. then i left the phone in that fastboot mood for a while. some times after the screeen was black and i tried to boot into fastboot but nothing happened. so when i plugged it with pc the qcom port notification appered and after searching i found out that my phone was in edl mood
Click to expand...
Click to collapse
you can remove antirollback, just edit those checkpoints on notepad it will run fine, be sure to flash correct firmware corresponds to your version and release, mine's global so i choose global
but since your problem is now on edl, well... hmm no one but with authorized mi account can bypass miflash tool. either take it to xiaomi directly if it was covered with warranty hoping to get it fixed
dont fall to 25$ guys, sure yeah they hold the keys but thats soo much
fireclouu said:
you can remove antirollback, just edit those checkpoints on notepad it will run fine, be sure to flash correct firmware corresponds to your version and release, mine's global so i choose global
but since your problem is now on edl, well... hmm no one but with authorized mi account can bypass miflash tool. either take it to xiaomi directly if it was covered with warranty hoping to get it fixed
dont fall to 25$ guys, sure yeah they hold the keys but thats soo much
Click to expand...
Click to collapse
yea right but the thing is that mine was purchased from another country so here xiaomi won't take itas a warranty product. I was hoping ir I could find someone here who has the mi authorized account or tell me how to get one. if it costs me to pay only once for getting a permanent mi authorized account I will definitely go for that
Zaman6234 said:
yea right but the thing is that mine was purchased from another country so here xiaomi won't take itas a warranty product. I was hoping ir I could find someone here who has the mi authorized account or tell me how to get one. if it costs me to pay only once for getting a permanent mi authorized account I will definitely go for that
Click to expand...
Click to collapse
I think I've heard of ppl on telegram offering this.
Zaman6234 said:
Hello, I am a poco f3 user and i've been using this phone for quite a while. till now i never had any problem installing or using custom rom. i was using cr droid and wanted to go for corvus os. after flashing corvus os through twrp my phone never rebooted and device manager showing qualcomm port 9008. after searching i found out i need patched firehose file for no auth flashing but couldn't find any file for poco f3. if anyone could help me with any solution then plz help me. i can't afford online servirces fees cause i'm broke af. so if anyone has any solution then plz help me
Click to expand...
Click to collapse
did you try to flash stock firmware using any qcom toolin windows?
tutibreaker said:
did you try to flash stock firmware using any qcom toolin windows?
Click to expand...
Click to collapse
Hello, I have tried to flash with qfil but it gave an error mostly because of the mi authentication part of the firmware. I searched for some time and found out that I need a patched firehose file to bypass the edl authentication problem. But if U have any Solutions or suggestions then plz tell me. i will try to apply your method
Zaman6234 said:
yea right but the thing is that mine was purchased from another country so here xiaomi won't take itas a warranty product. I was hoping ir I could find someone here who has the mi authorized account or tell me how to get one. if it costs me to pay only once for getting a permanent mi authorized account I will definitely go for that
Click to expand...
Click to collapse
the thing is that you cant get authorized mi account, someone offers it remotely
surely xiaomi centers can help you with that, if youre paying those remote flashers I suggest you take it there hoping to assist you
or just wait for some exploits on miflash to arise but surely that takes time
Goofy ahh locked EDL mode. Sent you a contact person in dm lol
Zaman6234 said:
Hello, I have tried to flash with qfil but it gave an error mostly because of the mi authentication part of the firmware. I searched for some time and found out that I need a patched firehose file to bypass the edl authentication problem. But if U have any Solutions or suggestions then plz tell me. i will try to apply your method
Click to expand...
Click to collapse
I have the exact same problem as you. My F3 is only loading the QCOM port and not loading in to fastboot. Please can you tell what did you do to get it working?
symbiansucks said:
I have the exact same problem as you. My F3 is only loading the QCOM port and not loading in to fastboot. Please can you tell what did you do to get it working?
Click to expand...
Click to collapse
This is my understanding. You have 2 options:
Go to Xiaomi Service Center and let them repair it (worth trying/checking out, even if out-of-warranty I think!).
Or, contacting someone who's got an Authorised Xiaomi Account who'd be able to flash the ROM. That's what I did:
I contacted a group on Telegram, got in contact with the moderator. Paid 23€ over PayPal. Needed to wait a few hours for his technician to become available for me. I had to send him TeamViewer session credentials, so he can remote-connect to my PC. He was then available and connected to my PC. I had prepared with the latest MIUI Fastboot ROM and made sure my phone is connected and detected by Windows as a QCOM device. He downloaded some zipped piece of software, opened it, had to move out the TeamViewer session and came back and entered some kind of a Token into that program. He then used Mi Flash (I don't know if *my* Mi Flash, or from his downloaded zip-file), flashed the ROM and it worked.
Actually, during the flash in Mi Flash, my phone disconnected once, which was my fault though. He got a little annoyed, but he flashed it the second time and it worked.
It sounds very sketchy, but it's what I did, and it worked.
cyanGalaxy said:
This is my understanding. You have 2 options:
Go to Xiaomi Service Center and let them repair it (worth trying/checking out, even if out-of-warranty I think!).
Or, contacting someone who's got an Authorised Xiaomi Account who'd be able to flash the ROM. That's what I did:
I contacted a group on Telegram, got in contact with the moderator. Paid 23€ over PayPal. Needed to wait a few hours for his technician to become available for me. I had to send him TeamViewer session credentials, so he can remote-connect to my PC. He was then available and connected to my PC. I had prepared with the latest MIUI Fastboot ROM and made sure my phone is connected and detected by Windows as a QCOM device. He downloaded some zipped piece of software, opened it, had to move out the TeamViewer session and came back and entered some kind of a Token into that program. He then used Mi Flash (I don't know if *my* Mi Flash, or from his downloaded zip-file), flashed the ROM and it worked.
Actually, during the flash in Mi Flash, my phone disconnected once, which was my fault though. He got a little annoyed, but he flashed it the second time and it worked.
It sounds very sketchy, but it's what I did, and it worked.
Click to expand...
Click to collapse
You didnt have to open your phone and short the pins?
ApexPrime said:
You didnt have to open your phone and short the pins?
Click to expand...
Click to collapse
I did. My phone didn't auto-enter EDL Mode. I've heard that if the Qualcomm SOC detects that the bootloader can't be booted, it automatically alternates to the EDL Mode, which resides on the SOC itself, is read-only, and can't be erased.
Didn't happen for me. My suspicion is that my phone was able to boot into the BL, but couldn't load anything (Fastboot, Recovery, System..), and so it was stuck there instead of in EDL Mode.
I could've bought a Deep Flash Cable, but I didn't. I think I wanted an excuse to open up my phone "What could possibly go wrong?" =)
Hey guys,
I wanted to try out a custom rom, so I unlocked the bootloader of my phone and installed orange fox recovery successfully. Since I somehow uninstalled MIUI in the process of installing orange fox, I downloaded a .zip file containing a custom rom for my device (its called Cherish OS, but that shouldn't be the problem here). Since I wiped the whole internal storage of my phone, I used the "adb push" command to get the according file onto my Xiaomi Mi 11 Lite 5G NE. After installing the .zip file using orange fox, I pressed "reboot". However, my phone just shut down and did not reboot as it was supposed to do. I tried holding down the power button for at least 10 seconds to get it to boot, however the screen remained completely black. Even pressing volume down and power button did not help, the same with power up and power button. Whatever I tried, the screen remained black (no bootlogo etc).
I then charged up my phone, but that did not solve the issue either (before installation it had 47%, so I doubt that the battery died during installation as its a brand new phone).
One thing to notice is that my Windows PC makes a sound when I plug my phone into my Computer, as if I has plugged in a harddrive or something. But I can't get it to show up in the file explorer or with "fastboot devices". So clearly something happens when I turn on my phone, but the screen remains off.
I really hope you can help me to bring my (brandnew) phone back to life!
Thanks in advance.
P.S.: I used an ampmeter to check the charging current, its only around 60mA even though I used the official 33W charging brick.
another hard brick... you should have followed official instructions on how to flash the ROM...
PaperKing13 said:
another hard brick... you should have followed official instructions on how to flash the ROM...
Click to expand...
Click to collapse
So there is absolutely no way of getting it back to life? Can't I flash new firmware of something?
Edit: Okay, so I guess its in EDL mode now, any tips/tutorials on how to flash new firmware?
Lupus3141 said:
So there is absolutely no way of getting it back to life? Can't I flash new firmware of something?
Edit: Okay, so I guess its in EDL mode now, any tips/tutorials on how to flash new firmware?
Click to expand...
Click to collapse
Enter "Fastboot" mode and flash original Firmware from here https://xiaomifirmwareupdater.com/firmware/agate/ ! You can also use Miflash
4rch0 said:
Enter "Fastboot" mode and flash original Firmware from here https://xiaomifirmwareupdater.com/firmware/agate/ ! You can also use Miflash
Click to expand...
Click to collapse
Thank you for your reply, but unfortunately my phone is completely fried. I can't access fastboot mode. Any ideas how to fix this? As I have already mentioned, I guess its in EDL mode and to my knowledge only certified repair shops (or scammy internet advertisments) can resolve this issue.
Thanks in advance!
Lupus3141 said:
Thank you for your reply, but unfortunately my phone is completely fried. I can't access fastboot mode. Any ideas how to fix this? As I have already mentioned, I guess its in EDL mode and to my knowledge only certified repair shops (or scammy internet advertisments) can resolve this issue.
Thanks in advance!
Click to expand...
Click to collapse
How to Exit EDL Mode [Emergency Download Mode] in Android
In this comprehensive tutorial, we will show you the detailed steps to exit the EDL Mode (Emergency Download Mode) in Android
www.droidwin.com
4rch0 said:
How to Exit EDL Mode [Emergency Download Mode] in Android
In this comprehensive tutorial, we will show you the detailed steps to exit the EDL Mode (Emergency Download Mode) in Android
www.droidwin.com
Click to expand...
Click to collapse
[GUIDE] How to bypass authentication and flash in EDL with NO auth for FREE
Thanks to: chaosmaster / k4y0z: GitHub / XDA xyzz / xyz`: GitHub / XDA Dinolek: GitHub / XDA How to install: 1. Download the attached file: VD171_MTK-bypass.zip. 2. Extract the file and open the folder. 3. Run and install python...
forum.xda-developers.com
The tutorial seems to just work with Mediatek processors, however my phone uses Qualcom. Any other links?
Lupus3141 said:
So there is absolutely no way of getting it back to life? Can't I flash new firmware of something?
Edit: Okay, so I guess its in EDL mode now, any tips/tutorials on how to flash new firmware?
Click to expand...
Click to collapse
There's no tutorial unfortunately... You'll have to go to an Authorized Xiaomi Service Center.