Develop Bugs

[Q] screen mirroring

I cannot use screen mirroring keep getting a message that says Unable to start Screen Mirroring because of a hardware issue
any help is appreciated thanks

A152394 said:
I cannot use screen mirroring keep getting a message that says Unable to start Screen Mirroring because of a hardware issue
any help is appreciated thanks
Click to expand...
Click to collapse
You're rooted and using a custom recovery, right?

blindmanpb said:
You're rooted and using a custom recovery, right?
Click to expand...
Click to collapse
Yes that is correct

A152394 said:
Yes that is correct
Click to expand...
Click to collapse
That's why, then.
Flash stock recovery and that should restore screen mirroring.

blindmanpb said:
That's why, then.
Flash stock recovery and that should restore screen mirroring.
Click to expand...
Click to collapse
Where do I get stock recovery from?

blindmanpb said:
That's why, then.
Flash stock recovery and that should restore screen mirroring.
Click to expand...
Click to collapse
Thanks but it didn't work for me...
Anybody have any ideas?

whatllitbenext said:
Thanks but it didn't work for me...
Anybody have any ideas?
Click to expand...
Click to collapse
If your'e on Android 4.3, use this:
http://forum.xda-developers.com/showthread.php?t=2556527
On Android 4.4. it works fine for me, I use it all the time, hope I helped :good:

22sl22 said:
If your'e on Android 4.3, use this:
http://forum.xda-developers.com/showthread.php?t=2556527
On Android 4.4. it works fine for me, I use it all the time, hope I helped :good:
Click to expand...
Click to collapse
Thanks but my GN2 is on 4.3 (Jedi X2 Rom) and it's got not problem mirroring.
It's my GN10.1-2014Ed. on 4.4.2 (Hyperdrive RLS 3.1) that's not connecting...

whatllitbenext said:
Thanks but my GN2 is on 4.3 (Jedi X2 Rom) and it's got not problem mirroring.
It's my GN10.1-2014Ed. on 4.4.2 (Hyperdrive RLS 3.1) that's not connecting...
Click to expand...
Click to collapse
For me, the only that worked:
- once rooted, make sure you get both current status and version (to be checked in download mode) as OFFICIAL (you can use Xposed or similar to do this, different threads can be found on this)
- flash with stock recovery
Hope this can help you as well...

jeje2 said:
For me, the only that worked:
- once rooted, make sure you get both current status and version (to be checked in download mode) as OFFICIAL (you can use Xposed or similar to do this, different threads can be found on this)
- flash with stock recovery
Hope this can help you as well...
Click to expand...
Click to collapse
Thanks @jeje2.
In Xposed I found system status under "Security Hacks" but couldn't find where to change version? Would you please let me know?
Thanks!

whatllitbenext said:
Thanks @jeje2.
In Xposed I found system status under "Security Hacks" but couldn't find where to change version? Would you please let me know?
Thanks!
Click to expand...
Click to collapse
You should try to go over specific Mode / Module (not sure about the English translation). To do this:
- Install Xposed Installer (or similar mode xposed mode installer)
- In Xposed Installer, download the mode "Cosmetics Device Status Normal Modification"
- Then, in the mode menu, select ComesticSysScopeNormalizer (or something that looks like this...) to activate
Restart, flash stock recovery, boot in recovery mode... and cross fingers!
Hope this will work
Best,

Sorry if this is too simple, just afraid of the bricking with Knox, etc. Which Stock Recovery do I use with KitKat after rooting?
Thanks!

offtohavasu said:
Sorry if this is too simple, just afraid of the bricking with Knox, etc. Which Stock Recovery do I use with KitKat after rooting?
Thanks!
Click to expand...
Click to collapse
This one should be fine http://forum.xda-developers.com/showthread.php?t=2727607

jeje2 said:
This one should be fine http://forum.xda-developers.com/showthread.php?t=2727607
Click to expand...
Click to collapse
Worked perfect. Back to screen mirroring!

offtohavasu said:
Worked perfect. Back to screen mirroring!
Click to expand...
Click to collapse
Really happy it did and hopefully it will help some others, I have spent days trying to sort this out

not a rooted device
My tablet isn't rooted & I don't want to root it because it will violate my warranty so is there any other way to get the screen mirroring to work without rooting my device?

sweetthing4523 said:
My tablet isn't rooted & I don't want to root it because it will violate my warranty so is there any other way to get the screen mirroring to work without rooting my device?
Click to expand...
Click to collapse
Normally it should work until you flash a custom recovery. But in this case you already set the knox flag. So, it doesn't matter if you are also rooted or not.
For whom it not worked:
After flashing the stock recovery boot once into recovery mode. For some this helps.

Mine's stock unrooted and i get that error too.

Original CM12S for Yureka" Thanks to CAESAR"

Hi Guys
Here's the official link of CM12S OTA package for Yu Yureka.
Guide:
Step 1: Download the official CM12s ROM for Yu Yureka "cm-12.0-YNG1TAS0W0-tomato-signed.zip" from one of the links above
Step 2: Copy the downloaded file onto the device memory – suggest you to copy it into the root folder
Step 3 : Flashing the OTA using Stock Cyanogen recovery
(To go into recovery: Press Volume up + Volume down + Power button, three buttons at the same time)
(To move up and down in recovery use volume buttons and power button to select)
1. Turn off your device
2. Reboot into stock recovery
3. Select Apply Update
4. Select Choose from internal storage
5. Select the file "cm-12.0-YNG1TAS0W0-tomato-signed.zip". The ROM will be flashed and you should be seeing the Android Bot
6. Once installation is over, go to main page and ‘wipe cache partition‘.
7. Then select Reboot system now
http://builds.cyngn.com/cyanogen-os/tomato/12.0-YNG1TAS0W0-tomato/56deeca328/cm-12.0-YNG1TAS0W0-tomato-signed.zip
I'm not the owner of the link..Original Credit goes to Caesar

thanks a lot.. I ll be making a video on this.. :good:
here it is ..

mythreya said:
Hi Guys
Here's the official link of CM12S OTA package for Yu Yureka.
http://builds.cyngn.com/cyanogen-os/tomato/12.0-YNG1TAS0W0-tomato/56deeca328/cm-12.0-YNG1TAS0W0-tomato-signed.zip
I'm not the owner of the link..Original Credit goes to Caesar
Click to expand...
Click to collapse
I know it's original, but last I heard CM12S was still in the soak test procedure. There may still be unresolved bugs.
Also, is this a 32-bit build or a 64-bit build?

id74em8 said:
I know it's original, but last I heard CM12S was still in the soak test procedure. There may still be unresolved bugs.
Also, is this a 32-bit build or a 64-bit build?
Click to expand...
Click to collapse
Its a 64bit build

mythreya said:
Its a 64bit build
Click to expand...
Click to collapse
Did you find any unresolved issues?
Like small WiFi/Bluetooth/RIL bugs of some sort?
Or is it perfectly safe to be flashed?
I can't take risks, since I won't be able to downgrade my device after flashing it.

id74em8 said:
Did you find any unresolved issues?
Like small WiFi/Bluetooth/RIL bugs of some sort?
Or is it perfectly safe to be flashed?
I can't take risks, since I won't be able to downgrade my device after flashing it.
Click to expand...
Click to collapse
it is perfectly safe to flash it... but after flashing, it lags a little.... and battery drains a lot.. and also heat issue... i would suggest u to wait for OTA update on your phone.

suhasrocz said:
it is perfectly safe to flash it... but after flashing, it lags a little.... and battery drains a lot.. and also heat issue... i would suggest u to wait for OTA update on your phone.
Click to expand...
Click to collapse
Will do so. Thanks

bro its doesn't matter's at all
suhasrocz said:
it is perfectly safe to flash it... but after flashing, it lags a little.... and battery drains a lot.. and also heat issue... i would suggest u to wait for OTA update on your phone.
Click to expand...
Click to collapse
You Can Flash This,because its same update that you will get on phone,
heating issue is normal,(thsi issue is also on kitkat because of proccessor).
And about battery once you fash the Rom ,
Calibrate your battery.:good:

id74em8 said:
Did you find any unresolved issues?
Like small WiFi/Bluetooth/RIL bugs of some sort?
Or is it perfectly safe to be flashed?
I can't take risks, since I won't be able to downgrade my device after flashing it.
Click to expand...
Click to collapse
It is same as OTA update..I installed the same in my mob & 2 of my friends mob..working superb with out any lags..Lags will be there for 15 to 20 min untill the ROM settle but once it is settled..It will be a delicious Lollipop :highfive:

mythreya said:
It is same as OTA update..I installed the same in my mob & 2 of my friends mob..working superb with out any lags..Lags will be there for 15 to 20 min untill the ROM settle but once it is settled..It will be a delicious Lollipop :highfive:
Click to expand...
Click to collapse
So I'm downloading the OTA zip.
Then I'll flash it through CWM. Right?

id74em8 said:
So I'm downloading the OTA zip.
Then I'll flash it through CWM. Right?
Click to expand...
Click to collapse
Nope U can't flash through CWM recovery...to install the CM12S u need to be on Stock Recovery

mythreya said:
Nope U can't flash through CWM recovery...to install the CM12S u need to be on Stock Recovery
Click to expand...
Click to collapse
Oh poop. I'm screwed. Now what do I do

Is stock recovery necessary?

sal_rc said:
Is stock recovery necessary?
Click to expand...
Click to collapse
Stock Recovery & Stock Rom is compulsory for CM12S

id74em8 said:
Oh poop. I'm screwed. Now what do I do
Click to expand...
Click to collapse
Just revert to Stock Recovery & Stock ROM..Download Stock Recovery & ROM from Below link & install it
Stock Reovery : http://d-h.st/FSH
Stock ROM : http://forums.yuplaygod.com/threads/official-factory-images-and-flashing-tools-kitkat-32-bit-only.2178/

[HOW TO] Rooting Flashing Custom Recovery & Kernal

Hello Mates!
Since there is hardly any detailed guide as to how to Root, Flashing custom kernel & Recovery I decided to make a detailed guide that might help you.
Disclaimer:
Following this will void your warranty
This method will trip Knox and Samsung pay may not work (Until some Dev might come up with better method)
The steps mentioned here are was tested but in case if it didn't work I or the developers take no responsibility so use it on your own risk
Click to expand...
Click to collapse
Prerequisites
Odin v3.10.7
USB Drivers
Phil Recovery & Arter97 Kernal or TWRP Recovery
Super SU
Supported Devices:
g920fi
g920skl
g920tw8
g925fi
g925skl
g925tw8
g928fci (You can flash this on Indian firmware as well)
g928skl
g928tw8
So let's start
Backup your device before following this guide
First download and install the USB driver from the above link
Download Odin and unpack to a folder
Download Phil Recovery from Arter97 Kernel thread (recommended)
Download Arter97 Kernel & SuperSU and copy them to your device
Enable Developers option in your phone
Go to Settings -> Above device ->Software Info and tap on Build number 10 times to enable Developers Mode
Then Go to Settings & Developers option and Make sure "USB Debugging" is enabled & "OEM Unlock" is enabled
Flashing Recovery:
Now let's reboot the device into Download Mode
Power off the device.
Press Volume Down + Home + Power button at the same time and hold them.
Now open Odin and connect your device to your PC (Sometimes it might take some time for the Odin to detect the device)
Once Odin detects your device choose AP button and select the recovery file you downloaded (File name with extension .tar.md5)
Now go to the options tab and make sure everything else is unchecked expect F. Reset Time
Now click on Start to Flash the custom recovery
Once it's completed your see "PASS" in a green box on top left corner of Odin
Congratulations! You have successfully flashed your Custom Recovery
Flashing Kernel & Rooting
Now let's reboot the device in Recovery mode
Holding Power +Volume Up+ Home key for a couple of seconds.
Once you are in Recovery it's recommend to take a backup
Now Flash the Kernel (It will remove Knox)
Once you Flashed the Kernel, Flash SuperSU
Congratulations! You have successfully rooted your device.
You are facing any issues? Please post your question so I or one of our community members will help you out.
Update:
For Android Marshmallow you could use Chainfire's CF Root. For SM-G928C visit https://autoroot.chainfire.eu/ or download it from here
Also you could check Dr. Ketan's Root and Deep sleep fix guide: here
Update 27th March 2016:
Seems like the some of the root methods out there is hit and miss like CF Auto Root etc. But seems like lot of people reported rooting with SkyHigh Kernel seems to working.
SkyHigh Kernel

@ShyamSasi
That's brilliant...it will help a lot of people out and stop a lot of silly questions lol. Now only for some Roms or deodexed stock lol for xposed.
Sent from my SM-G928F using Tapatalk

nice write up. you might want to note that after the recovery is flashed. do not reboot the device system. i did it twice on accident and both times, because after the flash, it stays in download mode. the system re-installed the stock recovery. so what i did was hold: vol down, home and power to reboot back into download mode then from there i hit vol up to cancel. then as soon as the phone is about to reboot, i did the: vol up + home + power button combo to boot into the new recovery. *my phone didn't let me boot into recovery from download mode.

tatoo069sv said:
@ShyamSasi
That's brilliant...it will help a lot of people out and stop a lot of silly questions lol. Now only for some Roms or deodexed stock lol for xposed.
Sent from my SM-G928F using Tapatalk
Click to expand...
Click to collapse
Thank you
swift2fly said:
nice write up. you might want to note that after the recovery is flashed. do not reboot the device system. i did it twice on accident and both times, because after the flash, it stays in download mode. the system re-installed the stock recovery. so what i did was hold: vol down, home and power to reboot back into download mode then from there i hit vol up to cancel. then as soon as the phone is about to reboot, i did the: vol up + home + power button combo to boot into the new recovery. *my phone didn't let me boot into recovery from download mode.
Click to expand...
Click to collapse
Yes I understand. That's why I asked you uncheck everything from Odin i.e. Auto reboot option. Thanks for the tip. I'm sure this will help out.

i have this model they are not root yet ??
Edge+ Model SM-G928G

Does it work with the Canadian g928w8. Thanks much.

ShyamSasi said:
Thank you
Yes I understand. That's why I asked you uncheck everything from Odin i.e. Auto reboot option. Thanks for the tip. I'm sure this will help out.
Click to expand...
Click to collapse
i had Auto Reboot un-checked. so after the flash it just stays on download mode. therefore i did the steps that i had previously mentioned.

x.Orville.x said:
i have this model they are not root yet ??
Edge+ Model SM-G928G
Click to expand...
Click to collapse
I have G928G model and I used g928fci to root.
flutos said:
Does it work with the Canadian g928w8. Thanks much.
Click to expand...
Click to collapse
I'm not sure mate, seems like it's not listed. Browse around the kernel thread to see if anyone has reported flashing a compatible kernel.
swift2fly said:
i had Auto Reboot un-checked. so after the flash it just stays on download mode. therefore i did the steps that i had previously mentioned.
Click to expand...
Click to collapse
Ah alright. Thanks for sharing it.

Is SM-928F supported?

ShyamSasi said:
I have G928G model and I used g928fci to root.
(...)
Ah alright. Thanks for sharing it.
Click to expand...
Click to collapse
Same here. G928G model (Brazil, not India, different basebands), seems to work perfectly with F, C and I version.

sergio.custodio said:
Same here. G928G model (Brazil, not India, different basebands), seems to work perfectly with F, C and I versions.
Click to expand...
Click to collapse
Thanks!

Is possible used The same method to root s6 edge+ that s6 edge normal?

guta12 said:
Is possible used The same method to root s6 edge+ that s6 edge normal?
Click to expand...
Click to collapse
I don't believe so. So far the research I did S6 Edge could use a app to root but that doesn't support Android 5.1.1 version. Until they support 5.1.1 we have to use this method.

guta12 said:
Is possible used The same method to root s6 edge+ that s6 edge normal?
Click to expand...
Click to collapse
i can confirm that the steps are the same for the s6 edge, the kernel and required files are different. Just search and you will find it. I know this because i previously had the s6 edge (international) on 5.1.1

So this question sounds kinda dumb for me...
With this method I can root my SM-G928F right?
Does it wipe my phone?
Sorry for those questions but it's my first Samsung Phone.
-Lychee

xLychee said:
So this question sounds kinda dumb for me...
With this method I can root my SM-G928F right?
Does it wipe my phone?
Sorry for those questions but it's my first Samsung Phone.
-Lychee
Click to expand...
Click to collapse
Yes! It will root G928F.
No, it will not wipe the phone.

Thank you very much, then I will proceed and enjoy my adblocker again.
Another quite dumb question: Is F928fci the right kernel version / recovery for my device?
-Lychee
EDIT: Yes it is, reading helps alot.

is there anything for the mac?

JazzyStahh said:
is there anything for the mac?
Click to expand...
Click to collapse
There is Odin version ported for MAC http://forum.xda-developers.com/showthread.php?t=2598203 but I am not sure if it's compatible with Edge+

ShyamSasi said:
I have G928G model and I used g928fci to root.
I'm not sure mate, seems like it's not listed. Browse around the kernel thread to see if anyone has reported flashing a compatible kernel.
Ah alright. Thanks for sharing it.
Click to expand...
Click to collapse
Wherw i can find it i can see it
Sent from my SM-G928G using Tapatalk

Help with device?

Got the lg g3 andriod version 6.0, software version d85230h, looking to root, know you cant do it marshmellow. Anyone know how to do it?. I tryed to downgrade but i cant go into download mode.

I personally downgraded to Lollipop using LGUP and a KDZ file. Then used the One Click Root (Newest Root Method in General section) and installed AutoRec to get an old TWRP version, then updated TWRP with a bumped 3.0.3.0. All good to go!

do you have a link to a tutorial on how to do that?

adzcache said:
I personally downgraded to Lollipop using LGUP and a KDZ file. Then used the One Click Root (Newest Root Method in General section) and installed AutoRec to get an old TWRP version, then updated TWRP with a bumped 3.0.3.0. All good to go!
Click to expand...
Click to collapse
you have a link to the tutorials for this?

No I just searched through the G3 forums here and read other people's posts.
1. Get LGUP and your KDZ, then downgrade.
2. Find a thread called 'Newest Root Method' in the General section and follow that thread - it's easy to do.
3. Dig up the AutoRec tool for you variant and install TWRP - Then upgrade TWRP, there is a thread with TWRP 3.0.3.0 in the G3 Android Development section.
Good luck.

adzcache said:
No I just searched through the G3 forums here and read other people's posts.
1. Get LGUP and your KDZ, then downgrade.
2. Find a thread called 'Newest Root Method' in the General section and follow that thread - it's easy to do.
3. Dig up the AutoRec tool for you variant and install TWRP - Then upgrade TWRP, there is a thread with TWRP 3.0.3.0 in the G3 Android Development section.
Good luck.
Click to expand...
Click to collapse
but i cant put my phone into download mode

Crunch99 said:
but i cant put my phone into download mode
Click to expand...
Click to collapse
Huh, not sure how I can help with that, should be able to hold volume up with the phone powered off and plug into your PC for download mode.

adzcache said:
Huh, not sure how I can help with that, should be able to hold volume up with the phone powered off and plug into your PC for download mode.
Click to expand...
Click to collapse
yea that doesnt work for me, i hold up on the volume and then plug the phone in

adzcache said:
Huh, not sure how I can help with that, should be able to hold volume up with the phone powered off and plug into your PC for download mode.
Click to expand...
Click to collapse
\
got it in download mode, done everything just an error. which kdz and dll did you use?

Crunch99 said:
\
got it in download mode, done everything just an error. which kdz and dll did you use?
Click to expand...
Click to collapse
You can use one of these.
http://storagecow.eu/index.php?dir=Xda/LG+G3/Stock/Canada+D852/MM+6.0/
Do you want a guide on how to downgrade,Root and also install TWRP?

Sotiris02 said:
You can use one of these.
http://storagecow.eu/index.php?dir=Xda/LG+G3/Stock/Canada+D852/MM+6.0/
Do you want a guide on how to downgrade,Root and also install TWRP?
Click to expand...
Click to collapse
got the downgrade one and rooted, just need the guide on twrp

Crunch99 said:
got the downgrade one and rooted, just need the guide on twrp
Click to expand...
Click to collapse
Here you go
https://forum.xda-developers.com/lg-g3/general/root-twrp-marshmallow-d855-30b-t3286268

Sotiris02 said:
Here you go
https://forum.xda-developers.com/lg-g3/general/root-twrp-marshmallow-d855-30b-t3286268
Click to expand...
Click to collapse
im on kit-kat now because i had to root, so is it the same steps?

Crunch99 said:
im on kit-kat now because i had to root, so is it the same steps?
Click to expand...
Click to collapse
Well yes auto rec works with every version of android till marshmallow.
Download that rar,unrar it flash TWRP with Autorec(app included in rar) in some words,follow that guide.
But if autorec doesn't work go over here and you will find and a kitkat version.

Sotiris02 said:
Well yes auto rec works with every version of android till marshmallow.
Download that rar,unrar it flash TWRP with Autorec(app included in rar) in some words,follow that guide.
Click to expand...
Click to collapse
perfect thanks

Sotiris02 said:
Well yes auto rec works with every version of android till marshmallow.
Download that rar,unrar it flash TWRP with Autorec(app included in rar) in some words,follow that guide.
But if autorec doesn't work go over here and you will find and a kitkat version.
Click to expand...
Click to collapse
installed CM13 and lost my root, dont think there is a way i can root again

Crunch99 said:
installed CM13 and lost my root, dont think there is a way i can root again
Click to expand...
Click to collapse
You have Root, go to Settings→About phone→click a lot of times Build number,till it shows "You have enabled development settings".Then go back at the nain screen of settings and you will see this "Developer opinions",click that and scroll down.You will see "Root Access" click on that and enable it.
Greetings.

Need help with update.

I have a rooted Honor 8 pro (DUK-L09C675B130), with an update in queue but everytime I download the update the phone boots into TWRP and it is not able to flash it. I searched for threads to unroot the phone (or get the old recovery) but I didn't find any solid answer. Also, when I try to enter recovery using the button combination Huawei E recovery shows up instead of TWRP. And TWRP is unable to flash anything, be it an official update or custom files. Any kind of assistance is appreciated. Thank you!

You have SuerSU or magisk?!

PalakMi said:
You have SuerSU or magisk?!
Click to expand...
Click to collapse
I have phh's SuperUser.

devilrulz4ever said:
I have phh's SuperUser.
Click to expand...
Click to collapse
Can you try to reflash your firmware to reset everything?

sniperlife:D said:
Can you try to reflash your firmware to reset everything?
Click to expand...
Click to collapse
From where do i get the firmware?
Most firmwares I saw here are for other build numbers.

devilrulz4ever said:
From where do i get the firmware?
Most firmwares I saw here are for other build numbers.
Click to expand...
Click to collapse
I just checked. You're right. Can't find it too.