Hello Mates!
Since there is hardly any detailed guide as to how to Root, Flashing custom kernel & Recovery I decided to make a detailed guide that might help you.
Disclaimer:
Following this will void your warranty
This method will trip Knox and Samsung pay may not work (Until some Dev might come up with better method)
The steps mentioned here are was tested but in case if it didn't work I or the developers take no responsibility so use it on your own risk
Click to expand...
Click to collapse
Prerequisites
Odin v3.10.7
USB Drivers
Phil Recovery & Arter97 Kernal or TWRP Recovery
Super SU
Supported Devices:
g920fi
g920skl
g920tw8
g925fi
g925skl
g925tw8
g928fci (You can flash this on Indian firmware as well)
g928skl
g928tw8
So let's start
Backup your device before following this guide
First download and install the USB driver from the above link
Download Odin and unpack to a folder
Download Phil Recovery from Arter97 Kernel thread (recommended)
Download Arter97 Kernel & SuperSU and copy them to your device
Enable Developers option in your phone
Go to Settings -> Above device ->Software Info and tap on Build number 10 times to enable Developers Mode
Then Go to Settings & Developers option and Make sure "USB Debugging" is enabled & "OEM Unlock" is enabled
Flashing Recovery:
Now let's reboot the device into Download Mode
Power off the device.
Press Volume Down + Home + Power button at the same time and hold them.
Now open Odin and connect your device to your PC (Sometimes it might take some time for the Odin to detect the device)
Once Odin detects your device choose AP button and select the recovery file you downloaded (File name with extension .tar.md5)
Now go to the options tab and make sure everything else is unchecked expect F. Reset Time
Now click on Start to Flash the custom recovery
Once it's completed your see "PASS" in a green box on top left corner of Odin
Congratulations! You have successfully flashed your Custom Recovery
Flashing Kernel & Rooting
Now let's reboot the device in Recovery mode
Holding Power +Volume Up+ Home key for a couple of seconds.
Once you are in Recovery it's recommend to take a backup
Now Flash the Kernel (It will remove Knox)
Once you Flashed the Kernel, Flash SuperSU
Congratulations! You have successfully rooted your device.
You are facing any issues? Please post your question so I or one of our community members will help you out.
Update:
For Android Marshmallow you could use Chainfire's CF Root. For SM-G928C visit https://autoroot.chainfire.eu/ or download it from here
Also you could check Dr. Ketan's Root and Deep sleep fix guide: here
Update 27th March 2016:
Seems like the some of the root methods out there is hit and miss like CF Auto Root etc. But seems like lot of people reported rooting with SkyHigh Kernel seems to working.
SkyHigh Kernel
@ShyamSasi
That's brilliant...it will help a lot of people out and stop a lot of silly questions lol. Now only for some Roms or deodexed stock lol for xposed.
Sent from my SM-G928F using Tapatalk
nice write up. you might want to note that after the recovery is flashed. do not reboot the device system. i did it twice on accident and both times, because after the flash, it stays in download mode. the system re-installed the stock recovery. so what i did was hold: vol down, home and power to reboot back into download mode then from there i hit vol up to cancel. then as soon as the phone is about to reboot, i did the: vol up + home + power button combo to boot into the new recovery. *my phone didn't let me boot into recovery from download mode.
tatoo069sv said:
@ShyamSasi
That's brilliant...it will help a lot of people out and stop a lot of silly questions lol. Now only for some Roms or deodexed stock lol for xposed.
Sent from my SM-G928F using Tapatalk
Click to expand...
Click to collapse
Thank you
swift2fly said:
nice write up. you might want to note that after the recovery is flashed. do not reboot the device system. i did it twice on accident and both times, because after the flash, it stays in download mode. the system re-installed the stock recovery. so what i did was hold: vol down, home and power to reboot back into download mode then from there i hit vol up to cancel. then as soon as the phone is about to reboot, i did the: vol up + home + power button combo to boot into the new recovery. *my phone didn't let me boot into recovery from download mode.
Click to expand...
Click to collapse
Yes I understand. That's why I asked you uncheck everything from Odin i.e. Auto reboot option. Thanks for the tip. I'm sure this will help out.
i have this model they are not root yet ??
Edge+ Model SM-G928G
Does it work with the Canadian g928w8. Thanks much.
ShyamSasi said:
Thank you
Yes I understand. That's why I asked you uncheck everything from Odin i.e. Auto reboot option. Thanks for the tip. I'm sure this will help out.
Click to expand...
Click to collapse
i had Auto Reboot un-checked. so after the flash it just stays on download mode. therefore i did the steps that i had previously mentioned.
x.Orville.x said:
i have this model they are not root yet ??
Edge+ Model SM-G928G
Click to expand...
Click to collapse
I have G928G model and I used g928fci to root.
flutos said:
Does it work with the Canadian g928w8. Thanks much.
Click to expand...
Click to collapse
I'm not sure mate, seems like it's not listed. Browse around the kernel thread to see if anyone has reported flashing a compatible kernel.
swift2fly said:
i had Auto Reboot un-checked. so after the flash it just stays on download mode. therefore i did the steps that i had previously mentioned.
Click to expand...
Click to collapse
Ah alright. Thanks for sharing it.
Is SM-928F supported?
ShyamSasi said:
I have G928G model and I used g928fci to root.
(...)
Ah alright. Thanks for sharing it.
Click to expand...
Click to collapse
Same here. G928G model (Brazil, not India, different basebands), seems to work perfectly with F, C and I version.
sergio.custodio said:
Same here. G928G model (Brazil, not India, different basebands), seems to work perfectly with F, C and I versions.
Click to expand...
Click to collapse
Thanks!
Is possible used The same method to root s6 edge+ that s6 edge normal?
guta12 said:
Is possible used The same method to root s6 edge+ that s6 edge normal?
Click to expand...
Click to collapse
I don't believe so. So far the research I did S6 Edge could use a app to root but that doesn't support Android 5.1.1 version. Until they support 5.1.1 we have to use this method.
guta12 said:
Is possible used The same method to root s6 edge+ that s6 edge normal?
Click to expand...
Click to collapse
i can confirm that the steps are the same for the s6 edge, the kernel and required files are different. Just search and you will find it. I know this because i previously had the s6 edge (international) on 5.1.1
So this question sounds kinda dumb for me...
With this method I can root my SM-G928F right?
Does it wipe my phone?
Sorry for those questions but it's my first Samsung Phone.
-Lychee
xLychee said:
So this question sounds kinda dumb for me...
With this method I can root my SM-G928F right?
Does it wipe my phone?
Sorry for those questions but it's my first Samsung Phone.
-Lychee
Click to expand...
Click to collapse
Yes! It will root G928F.
No, it will not wipe the phone.
Thank you very much, then I will proceed and enjoy my adblocker again.
Another quite dumb question: Is F928fci the right kernel version / recovery for my device?
-Lychee
EDIT: Yes it is, reading helps alot.
is there anything for the mac?
JazzyStahh said:
is there anything for the mac?
Click to expand...
Click to collapse
There is Odin version ported for MAC http://forum.xda-developers.com/showthread.php?t=2598203 but I am not sure if it's compatible with Edge+
ShyamSasi said:
I have G928G model and I used g928fci to root.
I'm not sure mate, seems like it's not listed. Browse around the kernel thread to see if anyone has reported flashing a compatible kernel.
Ah alright. Thanks for sharing it.
Click to expand...
Click to collapse
Wherw i can find it i can see it
Sent from my SM-G928G using Tapatalk
Related
Hi guys
Today i buy a galaxy tab 3 sm-T210R
1 - how to root it?
2 - the stock firmware is 4.1.2 , what is the latest stock firmware for it?pls give me a link.
3 - does this device support simcard?
4 - one of my friend told me that it is locked.what that it means?how to know that it is lock or unlock?how to unlock it?
Thanks
muiacir said:
Hi guys
Today i buy a galaxy tab 3 sm-T210R
1 - how to root it?
2 - the stock firmware is 4.1.2 , what is the latest stock firmware for it?pls give me a link.
3 - does this device support simcard?
4 - one of my friend told me that it is locked.what that it means?how to know that it is lock or unlock?how to unlock it?
Thanks
Click to expand...
Click to collapse
1. http://forum.xda-developers.com/showthread.php?t=2437219
2. You have the latest firmware - http://www.samsungis.com/Firmwares/SM-T210R.html.
3. No, the device does not support a simcard.
4. The device is WiFi only and is not locked. Phones in the US are locked to specific carriers. To unlock the phone means to allow the phone to work on any carrier.
Brian D said:
1. http://forum.xda-developers.com/showthread.php?t=2437219
2. You have the latest firmware - http://www.samsungis.com/Firmwares/SM-T210R.html.
3. No, the device does not support a simcard.
4. The device is WiFi only and is not locked. Phones in the US are locked to specific carriers. To unlock the phone means to allow the phone to work on any carrier.
Click to expand...
Click to collapse
The topic for tw recovery and another topic for cwm recovery did not work and i still have the stock recovery.
Is there another way to root the device with no installung the pre-rooted firmware? I want the stock firmware
muiacir said:
The topic for tw recovery and another topic for cwm recovery did not work and i still have the stock recovery.
Is there another way to root the device with no installung the pre-rooted firmware? I want the stock firmware
Click to expand...
Click to collapse
The recovery and root works, you must unchecked the auto reboot by odin, after flashing boot manuly with the 3 combo keys into the revovery andflash the xxxroot.zip.
muiacir said:
The topic for tw recovery and another topic for cwm recovery did not work and i still have the stock recovery.
Is there another way to root the device with no installung the pre-rooted firmware? I want the stock firmware
Click to expand...
Click to collapse
All of my posted recoveries work fine. You didn't follow the directions close enough. Make sure you flash the universal root.zip once you get the recovery working. If not, it will re-install the stock recovery automatically.
Please explain how you are trying to add TWRP or CWM to your device. Do not leave out any details. This what we can see if you are missing a step. It should be a very simple process if the steps are followed correctly (as mentioned above). So please explain how you are doing it and what tools you are using.
Thanks
Brian D said:
1. http://forum.xda-developers.com/showthread.php?t=2437219
2. You have the latest firmware - http://www.samsungis.com/Firmwares/SM-T210R.html.
3. No, the device does not support a simcard.
4. The device is WiFi only and is not locked. Phones in the US are locked to specific carriers. To unlock the phone means to allow the phone to work on any carrier.
Click to expand...
Click to collapse
gr8nole said:
All of my posted recoveries work fine. You didn't follow the directions close enough. Make sure you flash the universal root.zip once you get the recovery working. If not, it will re-install the stock recovery automatically.
Click to expand...
Click to collapse
Brian D said:
Please explain how you are trying to add TWRP or CWM to your device. Do not leave out any details. This what we can see if you are missing a step. It should be a very simple process if the steps are followed correctly (as mentioned above). So please explain how you are doing it and what tools you are using.
Thanks
Click to expand...
Click to collapse
Thanks guys
1 - i go into download mode
2 - i open the odin v3.07(in win 8 that all the usb drivers were installed)
3 - then i connect the device to the computer via cable
4 - in the odin , the device added succesfully.
5 - i add the .tar file into pda and then uncheck the auto-reboot and f-partition
6 - i press start and it succesfully insralled(the odein said res ok and a green color upright said pass)
7 - i fo not go to the os , i directlly pres home and lower volme and power and directlly go to the recovery but still the recovery is stock recovery
muiacir said:
Thanks guys
1 - i go into download mode
2 - i open the odin v3.07(in win 8 that all the usb drivers were installed)
3 - then i connect the device to the computer via cable
4 - in the odin , the device added succesfully.
5 - i add the .tar file into pda and then uncheck the auto-reboot and f-partition
6 - i press start and it succesfully insralled(the odein said res ok and a green color upright said pass)
7 - i fo not go to the os , i directlly pres home and lower volme and power and directlly go to the recovery but still the recovery is stock recovery
Click to expand...
Click to collapse
I think step 7 is where you might be going wrong. Again, I THINK, I could be mistaken. But I would say start the tablet in normal mode before attempting to go into recovery. After the tablet starts, go ahead and shut it down. Then try and go into recovery mode.
Also, did you start Odin as an administrator? It sounds like you are OK in that regard as you got it going and loading. But if you are still having problems then try executing Odin as administrator.
Which .tar file are you loading? Is it one of the recovery files such as TWRP or CWM?
The only other thing might be the version of recovery you are trying to load. Make sure it works with your tab and firmware. I am sure you have already checked that, but just in case you forgot.
Brian D said:
I think step 7 is where you might be going wrong. Again, I THINK, I could be mistaken. But I would say start the tablet in normal mode before attempting to go into recovery. After the tablet starts, go ahead and shut it down. Then try and go into recovery mode.
Also, did you start Odin as an administrator? It sounds like you are OK in that regard as you got it going and loading. But if you are still having problems then try executing Odin as administrator.
Which .tar file are you loading? Is it one of the recovery files such as TWRP or CWM?
The only other thing might be the version of recovery you are trying to load. Make sure it works with your tab and firmware. I am sure you have already checked that, but just in case you forgot.
Click to expand...
Click to collapse
Ok i will test that(going to recovery after going to os)
What version should i use? I tested both of the tw and cwm
muiacir said:
Ok i will test that(going to recovery after going to os)
What version should i use? I tested both of the tw and cwm
Click to expand...
Click to collapse
In your number 7, you should be holding volume up to get into recovery. When you see the Tab 3 logo, release the power button but continue holding home and volume up until you get into recovery.
Sent from my SCH-I605
gr8nole said:
In your number 7, you should be holding volume up to get into recovery. When you see the Tab 3 logo, release the power button but continue holding home and volume up until you get into recovery.
Sent from my SCH-I605
Click to expand...
Click to collapse
My fault ..... i mean volume up but still stock recovery
muiacir said:
My fault ..... i mean volume up but still stock recovery
Click to expand...
Click to collapse
I'm not sure wath you are doing wrong.
Here are a link to a vid from Tomsgt , " How to install TWRP and root", when you are following the step you can root you Tab.
http://m.youtube.com/watch?feature=youtu.be&v=BDShwBHRjUE
Step one download full 5.1.1. Firmware from here LATEST OH6
https://www.androidfilehost.com/?fid=24052804347812539 thanks to @stangdriver44
Step 2 use odin 3.10. or smartswitch and flash full firmware if you need the link to latest odin let me know and I will post it
Step 3 Let phone boot up.... Turn off phone and go into download mode again, You do this by pressing
VOLUME DOWN, POWER, HOME BUTTON at the same time......... from here you go and flash this file thru odin one more time let it boot up, It might restart a couple of times since is rooting and you will have ROOT on 5.1.1
https://mega.co.nz/#!gwYkyDoT!T8KMjBvb5nXqmzlW6Jd0y-Yey0vx_DHUWOjxsWWgxz4 thanks @g.lewarne for this
Step 4- Which will be your Last step, This will be to get a custom recovery twrp on your device, You will need this if you want to flash any other roms, or files, If you want just root this step is not necessary........ So here we go same steps turn phone off and boot into download mode, and odin flash this file
And we got working TWRP v.2.8.7.1 thanks to @Aou
CONGRATULATIONS YOU ARE NOW ROOTED.............. ONLY CONTINUE IF YOU WANT TO FLASH TWRP A CUSTOM RECOVERY YOU MOST HAVE A 925T TMOBILE EDGE
Aou said:
Deleted & re-uploaded v9. It's working now, and just tested it: https://mega.co.nz/#!QBsXxLpb!QBP9zNinaHGaavn__EOn6vEyyehnutyFQ9ELwcfhEFU
The complete thread for twrp http://forum.xda-developers.com/tmo...recovery-twrp2-8-6-0-g925t-5-1-1-of6-t3143002
Click to expand...
Click to collapse
Flash this thru ODIN
I recommend to wipe your phone and start fresh for smoother performance but that is all up to you guys
gdmlaz said:
Step one download full 5.1.1. Firmware from here
http://forum.xda-developers.com/newthread.php?do=newthread&f=4196
Step 2 use odin 3.10. and flash full firmware if you need the link to latest odin let me know and I will post it
Step 3 Let phone boot up.... Turn off phone and go into download mode again, You do this by pressing
VOLUME DOWN, POWER, HOME BUTTON at the same time......... from here you go and flash this file thru odin one more time let it boot up, It might restart a couple of times since is rooting and you will have ROOT on 5.1.1
https://www.androidfilehost.com/?fid=24052804347764978 thanks @mikeyinid for this
Last step let twrp working same step turn phone up, boot into download mode, and odin flash this file
http://forum.xda-developers.com/showpost.php?p=61548356&postcount=570 thanks to @bigbiff for this
I recommend to wipe your phone and start fresh for smoother performance but that is all up to you guys
Click to expand...
Click to collapse
Actually credit for the rooted kernel goes to @g.lewarne, but thank you!
mikeyinid said:
Actually credit for the rooted kernel goes to @g.lewarne, but thank you!
Click to expand...
Click to collapse
will update thanks
gdmlaz said:
I'm getting stuck on a blackscreen for twrp so wait for this till i figure it out
Click to expand...
Click to collapse
So, go ahead and root but don't flash TWRP yet?
mzimmer88 said:
So, go ahead and root but don't flash TWRP yet?
Click to expand...
Click to collapse
Yea root works perfect..... Twrp I believe is for th 920 which gets us stuck in a black screen........ will have to wait for a working twrp for the edge
gdmlaz said:
Yea root works perfect..... Twrp I believe is for th 920 which gets us stuck in a black screen........ will have to wait for a working twrp for the edge
Click to expand...
Click to collapse
Okay, do you know if a factory reset will cause me to lose root? My battery is awful after the 5.1.1 OTA...
mzimmer88 said:
Okay, do you know if a factory reset will cause me to lose root? My battery is awful after the 5.1.1 OTA...
Click to expand...
Click to collapse
I believe it will...... You could just factory reset and then odin flash the 2nd file and you will have root back no big deal
https://www.androidfilehost.com/?fid=24052804347764978
ok problem I did steps above and root is good, but when I tried recovery im in black screen how to get out?? HELP
edit: never mind I found my way out
edit 2: I guess if I had read 100 % of above I would've seen that we still waiting on working twrp
1) Will this trip knox?
2) Will this work for the non-edge S6?
ipaq_101 said:
will this trip knox?
Click to expand...
Click to collapse
yes
lrmdaddy said:
ok problem I did steps above and root is good, but when I tried recovery im in black screen how to get out?? HELP
edit: never mind I found my way out
Click to expand...
Click to collapse
Yea do not flash TWRP I edited the first post..... Only way I found out how to get out of the black screen is reflashing the full firmware on top..... Or you could flash stock 5.1.1 recovery if you have it available
gdmlaz said:
Yea do not flash TWRP I edited the first post..... Only way I found out how to get out of the black screen is reflashing the full firmware on top..... Or you could flash stock 5.1.1 recovery if you have it available
Click to expand...
Click to collapse
all I did to get out of the dark of put phone into dl mode then out of dl mode and now is all good in s6 edge land...so if I under stand, we have root for s6 edge just no recovery?? im going to try twrp v2 just to see what happens
lrmdaddy said:
all I did to get out of the dark of put phone into dl mode then out of dl mode and now is all good in s6 edge land...so if I under stand, we have root for s6 edge just no recovery?? im going to try twrp v2 just to see what happens
Click to expand...
Click to collapse
yea exactly just root no recovery..... That will get you into another black-screen recoveries have to be matched to your android version...... if you can't get out of the black screen like before flash full firmware it won't wipe
gdmlaz said:
yea exactly just root no recovery..... That will get you into another black-screen recoveries have to be matched to your android version...... if you can't get out of the black screen like before flash full firmware it won't wipe
Click to expand...
Click to collapse
flashing firm ware now our v2 didn't work, I had try
I keep getting a security notice notification on top it's very annoying anybody know how to get rid of it
Do I need to download the 5.1.1 file if I am already on the official tmobile firmware of 5.1.1
rfgarza8 said:
Do I need to download the 5.1.1 file if I am already on the official tmobile firmware of 5.1.1
Click to expand...
Click to collapse
If you are not having problems with your OTA update you could just flash the 2nd file and you will have root..... Sometimes you have to flash it more than once...... If you are getting poor battery life I would suggest doing a factory reset and starting fresh
winco209 said:
I keep getting a security notice notification on top it's very annoying anybody know how to get rid of it
Click to expand...
Click to collapse
Same here trying to figure out how to make it stop
Using titanium uninstall smartswitch and securitylogagent and you won't get the notifications
If you want to keep smartswitch install this one that is modded after
http://forum.xda-developers.com/showpost.php?p=60155030&postcount=2905
gdmlaz said:
Same here trying to figure out how to make it stop
Using titanium uninstall smartswitch and securitylogagent and you won't get the notifications
Click to expand...
Click to collapse
Uninstall security log then it's fixed
I get this error: Custom Binary (Boot) Blocked by FAP Lock.
Anyone else getting this? How do I circumvent?
Here is the full and complete untouched Samsung MM DPD1-COKC-COJ5-COI5 stock Odin flash G928T
firmwares for the Samsung Galaxy S6 Edge Plus Phone
Here is a FAST download link for the LATEST Odin flash G928T MM DPD1 official Samsung G928T firmware for your pleasure:
https://www.androidfilehost.com/?fid=24499762636004597
Here is a FAST download link for the LATEST Odin flash G928T COKC official Samsung G928T firmware for your pleasure:
https://www.androidfilehost.com/?fid=24337548750880895
Here is a FAST download link for the previous Odin flash G928T COJ5 official Samsung G928T firmware for your pleasure:
https://www.androidfilehost.com/?fid=24052804347853145
Here is a FAST download link for the latest Odin 3.10.7 which is required:
https://www.androidfilehost.com/?fid=24052804347810352
Here is a FAST download link for SuperSU 2.46:
https://www.androidfilehost.com/?fid=24052804347812570
Here is a FAST download link for the latest update of SuperSU 2.71:
https://www.androidfilehost.com/?fid=24499762636003371
Here is a FAST download link to the latest update of TWRP 3.0.2 custom recovery:
(Please Note: Flash this using Odin)
https://www.androidfilehost.com/?fid=24499762636003370
Here is a FAST download link to the official release of TWRP 2.8.7.1 custom recovery with fixed OTG:
(Please Note: Flash this using Odin)
https://www.androidfilehost.com/?fid=24052804347812572
Here is a FAST download link to the official release of TWRP 2.8.7.1 custom recovery with fixed OTG:
(Please Note: this is the IMG version of TWRP for those of you who use Flashify)
https://www.androidfilehost.com/?fid=24052804347812573
Here is the link to @jovy23 's custom kernel thread where you can find the proper kernel for root access
http://forum.xda-developers.com/tmo...ernel-stock-modified-kernel-touchwiz-t3229557
Easy step by step instructions for those of you who don't know how to Odin flash firmware:
Download the Stock Firmware you need.
Unzip the firmware into an empty folder on your desktop
Download Odin 3.10.7
Unzip Odin into the same folder containing the firmware
Go into settings>about & keep tapping the "build number" until it tells you that you have Developers options
Go back to Settings>Developers options and make sure that "OEM unlock" has a check mark next to it
In Settings>Developers options be sure to enable "USB Debugging"
(Optional) Go to Settings>Backup and reset - then click on Factory data reset (This will wipe internal sdcard)
Power down the phone using the power button
Unplug the USB cable
Open the folder you created and open Odin (its a window application)
Select the "AP" slot in Odin and then navigate and select the firmware TAR file
Put the phone into Download Mode by pressing Power/VolumeDown/Home keys at the same time
When the phone is going into download mode and asks if you want to continue press volume up
Connect USB cable from the computer to the phone and be sure the the "COM:X" lights up in Odin
Once you do all the above successfully click START in Odin
Please Note: Odin flashing firmware does NOT format/wipe your internal sdcard.
=================================================================
Here is a little trick I just learned which might interest many of you:
If anyone has a problem going directly from "download mode" into "recovery mode" then here
is a way you can do it. I have never seen any posts about this procedure before but it works!
Press both of the volume keys, home key and the power button for about 15 seconds more or less
then as soon as the screen goes black let go of the volume down key and the phone will go directly
into recovery mode where you can power off the phone for a fresh power on or power down.
Give it a try a couple times, you have to be careful to look at the 4 buttons making sure that your
fingers are actually on all 4 buttons before pressing them at the same time, letting go of only the
volume down button as soon as you see the black screen, then the phone goes into recovery mode..
.
===================================================================
All Credits for the stock-modified kernel goes to @jovy23
All Credits for the firmware goes to: @samsung
All Credits for twrp custom recovery goes to: @bigbiff and @Dees_Troy
All Credits for the SuperSU goes to: @Chainfire
All Credits for this post goes to me @Misterjunky (LOL)
Good luck and have a great day everyone!
Misterjunky said:
Here is the full and complete untouched official BOH6 odin flash firmware
for the Samsung Galaxy S6 Edge Plus Phone (TMB-G928TUVU1BOH6)
Here is a FAST download link for the BOH4 firmware for your pleasure:
https://www.androidfilehost.com/?fid=24052804347812494
Here is a FAST download link for the latest Odin 3.10.7 which is required:
https://www.androidfilehost.com/?fid=24052804347810352
Here is a FAST download link for SuperSU 2.46:
https://www.androidfilehost.com/?fid=24052804347812570
Here is a link to the official release of TWRP 2.8.7.1 custom recovery with fixed OTG:
All Credits for the firmware goes to @samsung
All Credits for twrp custom recovery goes to @bigbiff and @Dees_Troy
All Credits for the SuperSU goes to @Chainfire
Good luck and have a great day everyone!
Click to expand...
Click to collapse
Thanks man but forgot the link to the TWRP 2.8.7.1
Error post
Thanks a lot for the files Sir.
Why do you have twrp / SU there? Can we root with this?
re: Root / Recovery
tozfeekum said:
Why do you have twrp / SU there? Can we root with this?
Click to expand...
Click to collapse
Sure you can root, thanks to @arter97 we have been able to root and flash
custom recovery for our G928T / N920T phones for over a week now.
Check out his thread to find out how to do it. it's easy:
http://forum.xda-developers.com/s6-edge-plus/development/arter97-kernel-galaxy-s6-edge-plus-t3189913
Have a great day!
thx the supersu how do we flash it odin or twrp?
re: flashing SuperSU
raw2000j said:
thx the supersu how do we flash it odin or twrp?
Click to expand...
Click to collapse
You flash supersu using twrp.
Good luck,
Have a great weekend!
I have a problem when I install twrp it come up fine but when hit reboot into system it keeps rebooting my phone and never comes on any ideas?I have odined stock like 5 times keeps happening every time I retry procedure
What is the odin 2.46 reference? That will confuse a lot of new users.
---------- Post added at 02:36 AM ---------- Previous post was at 02:32 AM ----------
Does this update work with no issues?
re: odin
tymansdaddy said:
What is the odin 2.46 reference? That will confuse a lot of new users.
---------- Post added at 02:36 AM ---------- Previous post was at 02:32 AM ----------
Does this update work with no issues?
Click to expand...
Click to collapse
Odin's version # was a typo error, it's all fixed now!
The Odin version is 3.10.7
(the only fully compatible odin for our phones)
Thanks for letting me know.
I flashed the TWRP provided here and ow I am stuck in bootloop. Need help.
ClassickWORLD said:
I flashed the TWRP provided here and ow I am stuck in bootloop. Need help.
Click to expand...
Click to collapse
Happened to me had to install arters kernel then it booted up
Sent from my SM-G928T using Tapatalk
Do I have to use TWRP or can I use PhilZ since I have that installed already? Thanks.
re: philz recovery
spooky71 said:
Do I have to use TWRP or can I use PhilZ since I have that installed already? Thanks.
Click to expand...
Click to collapse
Philz would work fine too, I just happen to like twrp a lot better.
Have a great day!
Sorry for being a nube..... Two questions, will this trip the know warranty? and will I continue to receive OTA updates with this? Sorry again for being a newbie.
re: knox
killfist said:
Sorry for being a nube..... Two questions, will this trip the know warranty? and will I continue to receive OTA updates with this? Sorry again for being a newbie.
Click to expand...
Click to collapse
Odin flashing official samsung firmware does not trip knox.
Flashing kernels and recoveries will trip knox.
After rooting your phone you will not get OTA updates.
Good luck!
Have a great day!
Thank you very much!!
So if I flash twrp knox will trip??
Edit: Yep trips, and thank you. I got stuck in a boot loop with Twrp and Arter. I had to sideload the kernel. Thank you for this easy post with all the files in one place!!!
Misterjunky said:
Philz would work fine too, I just happen to like twrp a lot better.
Have a great day!
Click to expand...
Click to collapse
Is that why you didn't put a download link for Philz recovery
re: philz recovery
starscrean212 said:
Is that why you didn't put a download link for Philz recovery
Click to expand...
Click to collapse
Yes it is, I would not advise anyone to flash anything
which I would not flash and use myself.
I thought we were talking about philosophy recovery...
Have a great day!
Good afternoon . sorry for my english writing an interpreter because of Belarus.
The problem, in my i747 screen does not respond to touch, after the installation cm13, all done correctly and according to the instructions, and after flashing when the phone beeps, the same does not go in recovery in odin mode. And now I do not know him Thu wasps do.
Flash the stock rom using Odin. You have i747 or i747m? You can confirm the model in Odin mode.
Re: Help
Tegra56 said:
Good afternoon . sorry for my english writing an interpreter because of Belarus.
The problem, in my i747 screen does not respond to touch, after the installation cm13, all done correctly and according to the instructions, and after flashing when the phone beeps, the same does not go in recovery in odin mode. And now I do not know him Thu wasps do.
Click to expand...
Click to collapse
@Tegra56
You may have to provide some more information about your device before we can start to identify the problem:
1. Have you checked the md5sum on the ROM you are using? (To make sure you did not get a bad download)
2. Is you device rooted?
3. What is your Bootloader/Modem Version #? [Settings-About Phone-Baseband Version: ( I747UCUFNJ2- this is the latest)]
4. Have you installed a custom recovery?(TWRP; CWM; Phil's Touch)
If you can provide this information I will try to assist with the problem.
edit: If you can't get into your settings follow @audit13 instructions in Post#2 and we will proceed from there.
audit13 said:
Flash the stock rom using Odin. You have i747 or i747m? You can confirm the model in Odin mode.
Click to expand...
Click to collapse
he does not go in odin mod
CoperaN said:
@Tegra56
You may have to provide some more information about your device before we can start to identify the problem:
1. Have you checked the md5sum on the ROM you are using? (To make sure you did not get a bad download)
2. Is you device rooted?
3. What is your Bootloader/Modem Version #? [Settings-About Phone-Baseband Version: ( I747UCUFNJ2- this is the latest)]
4. Have you installed a custom recovery?(TWRP; CWM; Phil's Touch)
If you can provide this information I will try to assist with the problem.
edit: If you can't get into your settings follow @audit13 instructions in Post#2 and we will proceed from there.
Click to expand...
Click to collapse
1 Firmware has been checked md5
2 firmware has rights root
3 This I can not say. as the phone will not turn on, it was i747
4 Was installed TWRP
Did you install cm13 for the d2att? Sounds like the incorrect ROM may have been flashed to the phone.
Re: Help
Tegra56 said:
1 Firmware has been checked md5
2 firmware has rights root
3 This I can not say. as the phone will not turn on, it was i747
4 Was installed TWRP
Click to expand...
Click to collapse
Ok @Tegra56
I noticed in your reply to @audit13 that you cannot get into Odin. But does the phone get into stock recovery mode?
Did you make a backup (with TWRP) of the ROM you used before flashing cm13 ? fingers-crossed
If you did, try restoring this backup first.
audit13 said:
Did you install cm13 for the d2att? Sounds like the incorrect ROM may have been flashed to the phone.
Click to expand...
Click to collapse
Yes, I downloaded it for cm13 for the d2att
CoperaN said:
Ok @Tegra56
I noticed in your reply to @audit13 that you cannot get into Odin. But does the phone get into stock recovery mode?
Did you make a backup (with TWRP) of the ROM you used before flashing cm13 ? fingers-crossed
If you did, try restoring this backup first.
Click to expand...
Click to collapse
unfortunately I did not make a copy
It may not help but have you tried using a USB jig to force the phone into download mode?
http://www.xda-developers.com/need-a-samsung-usb-jig-build-your-own/
Tegra56 said:
unfortunately I did not make a copy
Click to expand...
Click to collapse
Ok, Here is where the fun begins!!... First we must know what your bootloader/modem # is right now. This is very Important.
Based on the information you have provided thus far, it seems to me that your firmware was out of date when you flashed the custom ROM. My suggestion to you, would be to do a clean install (Wipe) of this ROM: http://d-h.st/sV2 You can Read More about it here: http://forum.xda-developers.com/showthread.php?t=2390147 It's a Custom KitKat ROM, just so you can boot into something, the recommended gapps for this ROM have been discontinued, but you can try "Open Gapps" Choose the 4.4 -Nano Package: http://opengapps.org/
If you were running KitKat 4.4.2 chances are, you might be updated to at least I747UCUEMJB in which case they are 3 incremental firmware updates left for your device. However updating firmware should only be done using Odin so we must try the above alternative first and then work on getting Odin to work with your device. Good Luck.
edit: I just noticed you said the phone won't turn on!!....
If you have TWRP installed then you will have to hold down the "Volume up" , "Power" and "Home" buttons, release the power button(Keep holding the other two) once you feel the device vibrate, when you see the android logo you may release the other two, TWRP recovery should boot.
audit13 said:
It may not help but have you tried using a USB jig to force the phone into download mode?
http://www.xda-developers.com/need-a-samsung-usb-jig-build-your-own/
Click to expand...
Click to collapse
No, I do not even know if such a method, after the holidays try
I'm new to this kind of phone, so i have 7.0 android and i want 8.0 android! Model is A3 2017 a320fl.
What i need to do to sucsessfuly upgrade? (Sorry for broken english)
Just go into settings, tap Software and Update and search for updates.
Otherwise, install a custom ROM.
Simon1511 said:
Just go into settings, tap Software and Update and search for updates.
Otherwise, install a custom ROM.
Click to expand...
Click to collapse
I used some old tutorial how to do that! But thanks anyway! ??
Simon1511 said:
Just go into settings, tap Software and Update and search for updates.
Otherwise, install a custom ROM.
Click to expand...
Click to collapse
Whats the best way to install twrp and get root on this device?
RootingPro-18 said:
Whats the best way to install twrp and get root on this device?
Click to expand...
Click to collapse
Download TWRP for your device and flash it through Odin.
For rooting I recommend magisk.
I also recommend to read through some guides.
Simon1511 said:
Download TWRP for your device and flash it through Odin.
For rooting I recommend magisk.
I also recommend to read through some guides.
Click to expand...
Click to collapse
Okey! But i can't exit download mode after twrp flashing!
RootingPro-18 said:
Okey! But i can't exit download mode after twrp flashing!
Click to expand...
Click to collapse
Did you checked auto reboot in odin?
If not, just hold down Volume down + Power Button for about 7 seconds, the device will reboot
Simon1511 said:
Did you checked auto reboot in odin?
If not, just hold down Volume down + Power Button for about 7 seconds, the device will reboot
Click to expand...
Click to collapse
I will try that! Thanks