HwOTA7 + HwOTA8 for Huawei P10 Lite1. On the phone, make a backup of all data (since during the upgrade all data will be erased). This is an obligatory condition.
2. Unlock your bootloader: (There´s no way around it (unfortnuately), but after the procedure your device will be locked again, so don´t worry!). The device will make a factory reset, so once again, BACKUP your files!!!!!!!!!!
3. Enable ‘USB debugging’ and ‘OEM Unlock’ option from setting>developer option>. To enable Developer Options, go to About phone and tap the Build Number 7 times.
4. You must download three zip-archives with a full "Full OTA" firmware on which you want to flash (If you look through in the FF (FirmwareFinder), you see there are 4 archives for China and 3 for other locations. You must to download for the version what model and location you will have after the firmware);
5. Add the downloaded files to the folder "HWOTA\Update" and run the .cmd file, it will rename them automatically according to the template:
- update_data_full_public.zip to update_data_public.zip
- update_full_....zip to update_all_hw.zip
- update.zip don't rename
and will be repack firmware (only HwOTA8)!!!
6. After run the universal batch file update.bat in the "HWOTA" folder, which will provide an opportunity to choose the required work option (change firmware/rebranding (change location)). FOLLOWING INSTRUCTIONS ON THE SCREEN OF THE MONITOR - the entire process is accompanied by prompts.
At the end of the process, everything should work fine... Be prepared, the bootloader will be locked after changing the location or firmware as a FullOTA.
7. If suddenly it turned out "bootloop" - go into the stock Recovery and make wipe.
PS: To change the firmware using the SD card, you need to create a folder "HWOTA" on the SD card and copy three firmware archives with the changed names (see above). In the batch file select item 1 "SDCard HWOTA directory"
HwOTA_WARSAW.zip
Short video tutorial for upgrade of any version authorized or unauthorized in phone P10 Lite Thanks @Alexxxx1
HwOTA8 method for rollback from EMUI 8 to Emui 5 - Huawei P10 lite Thanks @Alexxxx1
If you like my work, you can thank TeamMT PayPal
PPS: Sorry for my English!!!
used this to update my phone, to oreo... but no twrp works now, recovery fails to boot! so... no way to get root xD
Locked Bootloader
GizmoTheGreen said:
used this to update my phone, to oreo... but no twrp works now, recovery fails to boot! so... no way to get root xD
Click to expand...
Click to collapse
If you read the instructions, the bootloader will be locked after the process is completed, therefore, you're gonna have to unlock it and reflash the custom recovery that you had before
---------- Post added at 10:43 PM ---------- Previous post was at 10:11 PM ----------
vovan1982 said:
HwOTA for Huawei P10 Lite1. On the phone, make a backup of all data (since during the upgrade all data will be erased). This is an obligatory condition.
2. Unlock your bootloader: (There´s no way around it (unfortnuately), but after the procedure your device will be locked again, so don´t worry!). The device will make a factory reset, so once again, BACKUP your files!!!!!!!!!!
3. Enable ‘USB debugging’ and ‘OEM Unlock’ option from setting>developer option>. To enable Developer Options, go to About phone and tap the Build Number 7 times.
4. You must download three zip-archives with a full "Full OTA" firmware on which you want to flash (If you look through in the FF (FirmwareFinder), you see there are 4 archives for China and 3 for other locations. You must to download for the version what model and location you will have after the firmware);
5. Add the downloaded files to the folder "HWOTA\Update" and run the .cmd file, it will rename them automatically according to the template:
- update_data_full_public.zip to update_data_public.zip
- update_full_....zip to update_all_hw.zip
- update.zip don't rename
6. After run the universal batch file update.bat in the "HWOTA" folder, which will provide an opportunity to choose the required work option (change firmware/rebranding (change location)). FOLLOWING INSTRUCTIONS ON THE SCREEN OF THE MONITOR - the entire process is accompanied by prompts.
At the end of the process, everything should work fine... Be prepared, the bootloader will be locked after changing the location or firmware as a FullOTA.
7. If suddenly it turned out "bootloop" - go into the stock Recovery and make wipe.
PS: To change the firmware using the SD card, you need to create a folder "HWOTA" on the SD card and copy three firmware archives with the changed names (see above). In the batch file select item 1 "SDCard HWOTA directory"
HwOTA.zip
PPS: Sorry for my English!!!
Click to expand...
Click to collapse
Hello!
I need your help with the update.bat file
When I try to execute the file, it just shows a cmd screen for a couple of seconds and nothing happens
what am I possibly doing wrong?
Plus, theres no instrutions for pluggin the phone into the PC, what I being doing its plug in it on bootloader mode
I hope you can understand me, english is not my mother language.
And thank you in advance
EDIT: Forget it man, I make it work, I just copied the HWOTA directory to C: and it works
So far i just used the update firmware option and everything is working
GizmoTheGreen said:
used this to update my phone, to oreo... but no twrp works now, recovery fails to boot! so... no way to get root xD
Click to expand...
Click to collapse
Hi, of couse, on Oreo not TWRP. TWRP from Nougat does not work.
kristoff_andxp said:
If you read the instructions, the bootloader will be locked after the process is completed, therefore, you're gonna have to unlock it and reflash the custom recovery that you had before
---------- Post added at 10:43 PM ---------- Previous post was at 10:11 PM ----------
Hello!
I need your help with the update.bat file
When I try to execute the file, it just shows a cmd screen for a couple of seconds and nothing happens
what am I possibly doing wrong?
Plus, theres no instrutions for pluggin the phone into the PC, what I being doing its plug in it on bootloader mode
I hope you can understand me, english is not my mother language.
And thank you in advance
EDIT: Forget it man, I make it work, I just copied the HWOTA directory to C: and it works
So far i just used the update firmware option and everything is working
Click to expand...
Click to collapse
Yes, I can understand you. You did the right thing, way to HwOTA as short as possible.
vovan1982 said:
Hi, of couse, on Oreo not TWRP. TWRP from Nougat does not work.
Click to expand...
Click to collapse
so need to wait for twrp port... ok ^^
kristoff_andxp said:
If you read the instructions, the bootloader will be locked after the process is completed, therefore, you're gonna have to unlock it and reflash the custom recovery that you had before
Click to expand...
Click to collapse
1. it was not locked. and even if it was I can easily unlock it.
2. I flashed the recovery succesfully, it just gives an error when trying to enter it
so, need new twrp for oreo...
GizmoTheGreen said:
so need to wait for twrp port... ok ^^
1. it was not locked. and even if it was I can easily unlock it.
2. I flashed the recovery succesfully, it just gives an error when trying to enter it
so, need new twrp for oreo...
Click to expand...
Click to collapse
The greater question is: can be the bootloader locked after Oreo update ?
Eurofighter_ty said:
The greater question is: can be the bootloader locked after Oreo update ?
Click to expand...
Click to collapse
Don't know, I'm not going to try
My Bootloader is Unlocked after successful installation.
But why my PC says the prone is PRA-LX1 instead of WAS-LX1?
GizmoTheGreen said:
Don't know, I'm not going to try
Click to expand...
Click to collapse
Did u relocked bootloader?
Alexxxx1 said:
Did u relocked bootloader?
Click to expand...
Click to collapse
no. it did not relock bootloader automatically and I want it unlocked. also afraid of brick if I lock it with this rom.
GizmoTheGreen said:
no. it did not relock bootloader automatically and I want it unlocked. also afraid of brick if I lock it with this rom.
Click to expand...
Click to collapse
Yes, with this method bootloader stay unlock same as on p10 plus, but if you can enter in stock recovery no afraid of any brick if you relock bootloader.
Poslato sa VKY-L29 uz pomoć Tapatoka
for anyone wondering, I solved Magisk installation on oreo!
use .app extractor to get the RAMDISK image, patch it with magisk app on the phone. then use fastboot to install to ramdisk partition, like so
Code:
fastboot flash ramdisk patched_image.img
hope this helps
GizmoTheGreen said:
for anyone wondering, I solved Magisk installation on oreo!
use .app extractor to get the RAMDISK image, patch it with magisk app on the phone. then use fastboot to install to ramdisk partition, like so
Code:
fastboot flash ramdisk patched_image.img
hope this helps
Click to expand...
Click to collapse
Did you try it? Someone said he wasn't able to do it.
Jaizu said:
Did you try it? Someone said he wasn't able to do it.
Click to expand...
Click to collapse
yes I have magisk working
now that I think about it I tried earlier with the kernel image as well, there is no "boot" image.
maybe you need to do both kernel and ramdisk images seperately
either way, magisk working here, I already replaced the emojis
GizmoTheGreen said:
yes I have magisk working
now that I think about it I tried earlier with the kernel image as well, there is no "boot" image.
maybe you need to do both kernel and ramdisk images seperately
either way, magisk working here, I already replaced the emojis
Click to expand...
Click to collapse
So, what's the first impressions of Emui 8?
Sent from my WAS-LX1 using Tapatalk
GizmoTheGreen said:
yes I have magisk working
now that I think about it I tried earlier with the kernel image as well, there is no "boot" image.
maybe you need to do both kernel and ramdisk images seperately
either way, magisk working here, I already replaced the emojis
Click to expand...
Click to collapse
Mind sharing patched .img files? What device model are you using?
GizmoTheGreen said:
so need to wait for twrp port... ok ^^
1. it was not locked. and even if it was I can easily unlock it.
2. I flashed the recovery succesfully, it just gives an error when trying to enter it
so, need new twrp for oreo...
Click to expand...
Click to collapse
On P10 Lite with Oreo worked TWRP with P Smart Oreo.
vovan1982 said:
On P10 Lite with Oreo worked TWRP with P Smart Oreo.
Click to expand...
Click to collapse
Got a link?
vovan1982 said:
On P10 Lite with Oreo worked TWRP with P Smart Oreo.
Click to expand...
Click to collapse
If you mean that: http://www.mediafire.com/file/icpfjhw9eysjlao/FIGO321.img (TWRP-3.2.1-0 for Huawei P Smart)
I've not test yet if it's fully comatible, but you can enter into TWRP and seems to works.
Reboot into fastboot and enter the command:
fastboot flash recovery_ramdisk FIGO321.img
recovery_ramdisk partition in Android 8 is the Recovery
Hello guys,
I have a lot of problems with my cust partition and as moving the files from the cust partition to another phone works, I need the files of the cust partition from someone on any global MIUI 9 based on android 8.1.0 (REDMI NOTE 5 PRO / 5 GLOBAL)
Please upload it to something and share it
It will save my device and fix the problems
Guide:
1. Boot to twrp
2. go to the file explorer of twrp
3. go to the root of the device
4. go to the cust folder and copy everything from there to your internal storage and move it to your PC via MTP
5. add the files to a zip file and upload it
Thanks and have a good day!
Just flash cust.img via fastboot. You can get it on any fastboot rom
devcon69 said:
Just flash cust.img via fastboot. You can get it on any fastboot rom
Click to expand...
Click to collapse
I need this for another phone, so unfortunately I cant do that
hi everyone
I got the official firmware
How to install?
1.Download firmware
2.Put the file in the phone directory
3. Open system update, select local update
Warning！
1.Please backup your data！
2.imei cannot be recognized correctly
##Back to oxygen os can be restored
##The official said the later ota repair
3.Flashing into coloros will generate a new partition
my_product
my_engineering
my_stock
my_heytap
my_company
my_carrier
my_region
my_preload
my_manifest
After you return to oxygen os，You can use fastboot to clear these partitions
For example
fastboot resize-logical-partition my_product 0
Download link：
click me
Thanks a lot.
Sorry, I am new to Oneplus and flashing stuff. What does going back and forth to Color and Oxygen do exactly?
Thanks
I download the file you privde but it says can not be installed, any comments? thx
akm4100 said:
I download the file you privde but it says can not be installed, any comments? thx
Click to expand...
Click to collapse
Please provide a screenshot.
jizzboss said:
Please provide a screenshot.
Click to expand...
Click to collapse
Same as i have
Any solution to install ColorOS?
Help i get same error when trying to install color os i would like to test it..
GinoTonny said:
Any solution to install ColorOS?
Click to expand...
Click to collapse
You can, for that you need to flash android 12 dp 1, from there you can flash color os coz that dp is based on color os and has color os recovery. But sim is not getting recognised and showing wrong about details. For dp1 you need flash as per instructions, otherwise you may brick
Is anyone can post efs backup of mi 11x
Is anyone can give backup of efs partition of mi 11x because my imei nunber is been erased due to flashing in edl mode by selecting efs partition erase
Loading Google Docs
entekss said:
Loading Google Docs
Click to expand...
Click to collapse
Thanks
Unknown007891 said:
Thanks
Click to expand...
Click to collapse
How you use this bro to get your imei back because I tried to restore my imei using this in qfil but it doesn't seems to be working it's shows connecting always i made my qcn with help of this by editing imei in it through a software but how to flash it
soravang81 said:
How you use this bro to get your imei back because I tried to restore my imei using this in qfil but it doesn't seems to be working it's shows connecting always i made my qcn with help of this by editing imei in it through a software but how to flash it
Click to expand...
Click to collapse
Bro i did a lot of research on this and have come to the conclusion that you need to be in diagnostic mode in order to edit the qcn file. Your phone must be rooted. Check out the following link to find out more (Skip to step 3). Please tell me if you were able to change your imei or not. Thanks.
Xiaomi Diag Port Enable For New Xiaomi Phones | Enable Diag Mode Xiaomi - 99Media Sector
Xiaomi Diag Port Enable For New Xiaomi Phones | Enable Diag Mode Xiaomi In today’s post, we are going to
www.99mediasector.com
My phone was stuck on fastboot But I followed these explanations and my phone was fixed
Then I tried to flash recovery and root But I ran into system problems
And I wanted to flash it again with the same explanations
But this second time nothing appeared on the phone no recovery no fastboot
Only black screen and vibration when I press buttons
And now the device just enters edi mode
Note: I tried to flash it several times, and the same problem. I feel like it died
Restore backup that you made before first flashing. For this go to QFilHelper folder and rename Backup folder to Flash. Then open QfilHelper.exe and enter 6
ogreee said:
Restore backup that you made before first flashing. For this go to QFilHelper folder and rename Backup folder to Flash. Then open QfilHelper.exe and enter 6
Click to expand...
Click to collapse
The problem is that I did not create a backup because my files were damaged from the ground up
I was looking for you, the Russian forum contains links that I cannot download from :3
Akame-iq said:
I was looking for you, the Russian forum contains links that I cannot download from :3
Click to expand...
Click to collapse
In that case, if you didn't make a backup, you shouldn't have flashed the phone at all. Now I don't know how to help you
ogreee said:
In that case, if you didn't make a backup, you shouldn't have flashed the phone at all. Now I don't know how to help you
Click to expand...
Click to collapse
Why don't you give me your backup 3336
Akame-iq said:
Why don't you give me your backup 3336
Click to expand...
Click to collapse
Because your pcb ( board ) number and IMEI will broken if you flash my backup
Make a backup at least now. Repeat the backup process exactly in the video, right up to the location of the files on the desktop.
ogreee said:
Because your pcb ( board ) number and IMEI will broken if you flash my backup
Make a backup at least now. Repeat the backup process exactly in the video, right up to the location of the files on the desktop.
Click to expand...
Click to collapse
I created a backup But I don't think this will help me
I was thinking of creating your own backup for me and i skipping your number and IMEI Am I right or not ؟
damn :3
Akame-iq said:
I was thinking of creating your own backup for me and i skipping your number and IMEI Am I right or not ؟
Click to expand...
Click to collapse
I don't know what partition contains your pcb number, so I asked you make your backup even for bricked phone . For imei it's modemst partition
When you download backup, copy lun5_modemst1.bin and lun5_modemst2.bin files from your backup folder to my backup folder
gtme_backup.zip
drive.google.com
Also, your bootloader must be unlocked because my backup have root
The bootloader is already unlocked
Can you tell me if this region is Russian or European?
ogreee said:
I don't know what partition contains your pcb number, so I asked you make your backup even for bricked phone . For imei it's modemst partition
When you download backup, copy lun5_modemst1.bin and lun5_modemst2.bin files from your backup folder to my backup folder
gtme_backup.zip
drive.google.com
Also, your bootloader must be unlocked because my backup have root
Click to expand...
Click to collapse
brooooooo i loveeee youuuuuu
It worked. Thank you from the bottom of my heart
Akame-iq said:
The bootloader is already unlocked
Can you tell me if this region is Russian or European?
brooooooo i loveeee youuuuuu
It worked. Thank you from the bottom of my heart
Click to expand...
Click to collapse
lun5_modemst1.bin and lun5_modemst2.bin did you change these files? I also didn't take backup of my rom
ogreee said:
I don't know what partition contains your pcb number, so I asked you make your backup even for bricked phone . For imei it's modemst partition
When you download backup, copy lun5_modemst1.bin and lun5_modemst2.bin files from your backup folder to my backup folder
gtme_backup.zip
drive.google.com
Also, your bootloader must be unlocked because my backup have root
Click to expand...
Click to collapse
How to restore this?