Hi I've been looking for a stock Rom (Update.App) for Mediapad 2.8.0 802L.
I bought the tablet just a few weeks ago and installed an official update but then the tablet started acting weird. I believe that the update wasn't somehow successful.
I contacted Huawei but all they said was to have it send for repair, which takes time.
So I decided to flash it with an available official update file (I used a 801L update from Huawei Support). Now, it works fine, but if I could I want to get an official update file for my model.
I searched everywhere but no luck. So if anyone knows a place to download a stock update file for 802L, would you kindly let me know?
Or if someone can share it, that would work, too.
Thanks!
Leonroar said:
Hi I've been looking for a stock Rom (Update.App) for Mediapad 2.8.0 802L.
I bought the tablet just a few weeks ago and installed an official update but then the tablet started acting weird. I believe that the update wasn't somehow successful.
I contacted Huawei but all they said was to have it send for repair, which takes time.
So I decided to flash it with an available official update file (I used a 801L update from Huawei Support). Now, it works fine, but if I could I want to get an official update file for my model.
I searched everywhere but no luck. So if anyone knows a place to download a stock update file for 802L, would you kindly let me know?
Or if someone can share it, that would work, too.
Thanks!
Click to expand...
Click to collapse
I just found it! I've posted a new thread here.
I had done the same thing - flashed the 801L ROM on my 802L, and you should be OK for the most part.
If you want to try something quicker and less tedious than a reflash, I've attached the official build.prop and phone.prop files from my phone for both B003 and B005 builds; you can rename them to build.prop and phone.prop and drop them into /system while still keeping your 801L build (don't forget to reboot), and that should make your phone think that it is once more an 802L instead of showing "801L" as the device model in "Settings"->"About tablet".
http://consumer.huawei.com/my/support/downloads/index.htm
Keyword Huawei M2-801L
omaga said:
http://consumer.huawei.com/my/support/downloads/index.htm
Keyword Huawei M2-801L
Click to expand...
Click to collapse
But that's the 801L ROM; OP said he wanted the 802L ROM :cyclops:
My mistake, u are so right
----------------------------------------------------------------------------
Download link here: https://www.androidfilehost.com/?fid=7161016148664789606 (2021-08-05)
** CROSSHATCH (PIXEL 3 XL) FILE MISSING FOR 2021-08-05!! ALL OTHERS ARE GOOD.
Older Releases (not sure why I'm bothering, since newer releases will install fine on older A11 system versions, but whatever):
https://www.androidfilehost.com/?fid=14943124697586362458 (2021-07-05)
https://www.androidfilehost.com/?fid=14943124697586348210 (2021-06-05)
https://www.androidfilehost.com/?fid=2188818919693794137 (2021-05-05)
https://www.androidfilehost.com/?fid=2188818919693776406 (2021-04-05)
https://www.androidfilehost.com/?fid=17248734326145747020 (2021-03-05)
https://www.androidfilehost.com/?fid=17248734326145727328 (2021-02-05)
https://www.androidfilehost.com/?fid=17248734326145726589 (2021-01-05)
Edge Sense Plus has been hidden from the Play Store by the original dev, and I believe it won't show up unless you've previously added it to your account before it was officially discontinued. As far as most of us can tell, everything seems to still work fine (for now), but I've also seen a few people ask about the app scattered across these threads across the different Pixel devices. So here is a download link to the latest version of the APK.
Edge Sense Plus v1.32.0 APK: https://www.androidfilehost.com/?fid=7161016148664805712
Again, please don't expect any support from the dev since the mod has been discontinued by the original dev. Also, I'm not sure if you'll be able to unlock the pro features, nor what will happen if you attempt to pay for the pro license. Basic functionality, however, should work fine, at least for now. Also, it seems the app no longer properly recognizes whether the Magisk / Xposed mod is correctly installed, so it will likely always give you an error when you open it. Just hit ignore.
EDIT MARCH 2, 2021: THE ACTIVE EDGE MOD / EDGE SENSE PLUS PROJECT HAS OFFICIALLY BEEN RE-CONTINUED BY JAN'S DUDE, THE LEGENDARY TEAM VIPER MEMBER, MIKHAIL (@mikalovtch)!! NO NEED FOR ME TO CONTINUE MAKING THESE - PLEASE REFER TO THE MAGISK MANAGER REPO FOR FUTURE UPDATES. IT WAS FUN WHILE IT LASTED!!
SINCE IT HASN'T YET BEEN UPDATED AS OF TODAY THOUGH, I RAN MY SCRIPT AND BUILT FOR ALL PIXEL 3 / 3A / 4 VARIANTS AND UPDATED MY MODULE. PLEASE REFER TO DOWNLOAD LINK BELOW.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
(now updated to also install for 3 / 3 XL / 3a / 3a XL as well)
ONLY WORKS FOR PIXEL 4 XL "CORAL" AND PIXEL 4 "FLAME"!!!!
(WON'T EVEN INSTALL ON OTHER DEVICES, SO DON'T BOTHER)
tl;DR - A continuation of the "[Discontinued]Active Edge Mod for Pixel devices" Magisk module on the Magisk Module Repository, discontinued and last released for 2020-12-05 patch level. This is simply the same exact mod applied to the 2021-01-05 patch level. PLEASE DO NOT BOTHER THE ORIGINAL DEV FOR ANY SUPPORT - THIS IS AN UNOFFICIAL MOD.
As my wife and I love and can't live without, and basically purchased Pixel 4's, for the ability to retain the (advanced, custom) squeeze function that we've become so accustomed to over our years with the HTC U11 and U12+, I've modded the current month's SystemUIGoogle.apk file with the Active Edge Mod with the developer's permission. Please DO NOT bother him with any support requests and/or questions. Edge Sense Plus (the app itself) continues to work perfectly fine as far as I'm aware, and I only aim to continue keeping the Active Edge Magisk mod up to date for as long as I have the ability to do so. Also note that the Xposed Active Edge mod will continue to work in its capacity to remap short squeeze functions, though unfortunately since 01-2021 update we lose the long squeeze functionality without an updated Magisk module.
Since I've already done the work for our phone models, I decided to share it with you all. We really love this mod, and it brings back those sweet memories of the good ol' HTC days.
Again, PLEASE DO NOT ask the official developer for any support for this mod - this is an UNOFFICIAL continuation of his work!
Cheers, and long live Edge Sense Plus!
----------------------------------------------------
* Like I said, the original Edge Sense Plus dev gave me permission to modify and share this with you guys. This is just the base Active Edge / Edge Sense Plus magisk mod with no extras. This targets SystemUIGoogle.apk, and so will not play nicely with many of Tulsadiver's mods. Though if you're a regular user of his mods, you'll probably notice he often slipstreams the Active Edge mod option into his mods and offers separate packages - you'll need to refer to them if you use his mods.
All I wanted to do was bring Edge Sense Plus's advanced functionality back to our devices, updated to play nicely with the newest security patch levels. This is literally just an unofficial continuation of the Active Edge Mod that used to be offered on the Magisk Download Repository (now marked as [Discontinued]). AGAIN, PLEASE DON'T BOTHER J TO THE 4N (OR TULSADIVER FOR THAT MATTER) FOR ANY SUPPORT - THIS IS AN UNOFFICIAL MOD!
NOTE: Download link in the OP will install mod for the current patch level down to January 2021. It will detect your current patch level and install the correct file. For earlier system builds from 2020 and prior, please use the official discontinued module on the Magisk Manager repo. I did not clone the entire Active Edge Mod repository; my unofficial repository only hosts January 2021 and later builds.
Changes:
I know, I know... I said I was done with releasing my Unofficial Active Edge Mod installer, yet here's another month's update. I might keep doing it for those that update immediately and want it a bit sooner, so long as it's fortunate enough to happen on a day when I'm able to do it relatively quickly. Since I'm building these anyway and sending them over to the dev, for now, to upload to the official Magisk repo, for now I don't mind also updating it here a bit sooner. Anyway, more on this below and some of the headache involved moving forward...
04-05-2021: Soooo... the script I wrote to churn these out as quickly as possible as Google releases the updates, relied on system image dumps on GitRip... unfortunately the domain was seized by the FBI (lol) and so it looks like the old dumper is no longer updating his Android dumps repo on GitRip. Fortunately, mikalovtch pointed me over to a new source that hosts such system dumps, and I was able to get these done relatively quickly afterwards. OP is updated with the 04-05-2021 installer now!
03-02-2021: Meant to post an update a week or two ago. Noticed the magisk module on the official Magisk repo now says [RE-CONTINUED], so there really isn't much need for me to continue updating this anymore! As a final gift, I ran my batch builder script and built the modded apk's for all variants for the 2021-03-05 patch level, and download link for the module installer is in the OP.
02-02-2021: February 2021 mod is now uploaded. Updated installer is in the link in the OP.
02-01-2021: Modified and uploaded modded SystemUIGoogle.apk files for 3 / 3 XL / 3a / 3a XL to GitHub repository. Updated Magisk installer slightly to accommodate this, and removed a few unnecessary lines. Won't make any difference if you already installed the first release.
is there a chance for the unlocked active edge app? would also pay for it but is unfortunately no longer possible
IchiroKatsu said:
is there a chance for the unlocked active edge app? would also pay for it but is unfortunately no longer possible
Click to expand...
Click to collapse
Sorry, but I can't help you with that. Like I mentioned, I'm not at all affiliated with the original developers. However, I would encourage you to check out the dev's telegram - maybe they can help you there.
sorry, but i can't use it with edge sense plus. after flash modul via magisk, edge sense plus
announced 'magisk module required'.
fRuzzy said:
sorry, but i can't use it with edge sense plus. after flash modul via magisk, edge sense plus
announced 'magisk module required'.
Click to expand...
Click to collapse
using
Can you make sure the module is activated in Magisk Manager? If you updated to February patch level, depending on the order you did everything, the module might be disabled and greyed out. Also, you're using a Pixel 4 XL (or 3 or 3a) right? Also did you reboot after flashing?
fRuzzy said:
sorry, but i can't use it with edge sense plus. after flash modul via magisk, edge sense plus
announced 'magisk module required'.
Click to expand...
Click to collapse
Click on ignore
i5lee8bit said:
using
Can you make sure the module is activated in Magisk Manager? If you updated to February patch level, depending on the order you did everything, the module might be disabled and greyed out. Also, you're using a Pixel 4 XL (or 3 or 3a) right? Also did you reboot after flashing?
Click to expand...
Click to collapse
i'm using pixel 4xl, rooted, January patch level. thanks for create share this mod
IchiroKatsu said:
Click on ignore
Click to expand...
Click to collapse
i did it, thanks you
I ended up releasing for April 2021 firmware as well... I was going to stop, but this month was a bit complicated due to the closure of GitRip, requiring some tweaks to my build script. More details in 2nd post. Anyway, I figured I'll keep releasing my unofficial version anyway, at least for the time being. I'm basically using my script to build these really quickly in an automated fashion and sending them to the dev, who then updates the Magisk repo. So the official version on the Magisk repo won't take very long to get updated anyway, but maybe for those that like to update as soon as it drops may find this thread useful.
Gah! Everything was working fine on my Pixel 3, but I just installed the updated official Active Edge module that was released today, and I'm borked. Phone either bootloops or goes to the "corrupted" screen. Am I really going to have to factory reset and start over?
Edit...Whew! What a pain. It wouldn't even get through the stock firmware flashing process successfully until I manually flashed the stock boot image to both slots first. After that I was able to boot to stock, then reboot to safe mode, re-flashing the Magisk patched image along the way, then reboot with modules disabled and get everything working again.
Has anybody successfully flashed the new Active Edge module? I'm afraid to try again, but I do miss my squeeze for flashlight.
Hey guys, sorry about this month. I'm actually not sure because I didn't generate the files this month. Been so busy with fixing up the new house I haven't communicated with the dev yet this month; heck I haven't even updated my wife's Pixel either. Anyway, I'll take a look as soon as I can (probably won't be til at earliest tomorrow) and compare the hash checksums to see if maybe there was a silly mistake somewhere. Sorry for those that ran into problems, but I'm glad you got it all sorted out! Stay tuned for hopefully some good news and an update....
CSX321 said:
Gah! Everything was working fine on my Pixel 3, but I just installed the updated official Active Edge module that was released today, and I'm borked. Phone either bootloops or goes to the "corrupted" screen. Am I really going to have to factory reset and start over?
Edit...Whew! What a pain. It wouldn't even get through the stock firmware flashing process successfully until I manually flashed the stock boot image to both slots first. After that I was able to boot to stock, then reboot to safe mode, re-flashing the Magisk patched image along the way, then reboot with modules disabled and get everything working again.
Has anybody successfully flashed the new Active Edge module? I'm afraid to try again, but I do miss my squeeze for flashlight.
Click to expand...
Click to collapse
I had the same issue after @mikalovtch updated the repo module.
I was able to adb shell in while at the white spinning G screen before the phone rebooted to corrupted message. Once in went into /data/adb/modules and rm -rf the ESP mod.
Went through this twice then notified him in the Telegram channel.
I've mostly reverted to just using ESP in non root mode (hide it from Magisk) since usually by the time we get a working mod it is time for monthly update again. It sucks to not have long squeeze, but double works (kind of a pain to pull off reliably though).
I appreciate the time that the devs put in to keeping this going, and sometimes when I'm too busy to update monthly I can still get a month or two of use from it.
Anybody try V.82 module yet?
OP updated... though Pixel 3 XL is missing. All others should work fine. If I noticed sooner that mikalovtch had already updated the official repo, I probably would have skipped, but whatever... Feel free to use the unofficial one or the official one.
newkydawg said:
Anybody try V.82 module yet?
Click to expand...
Click to collapse
Apologies again to everyone. I literally didn't get a chance to start building the files until tonight... only to realize it looks like Mikhail already updated the official repo with fixed files. Have you (or has anybody) tried the updated module yet? The comment on GitHub says that blueline and crosshatch were fixed.
Btw, unfortunately the dumps I usually source the SystemUIGoogle.apk files from didn't dump crosshatch (3 XL), or blueline (3) this month, so I manually pulled the file from the Pixel 3. But I still don't have the Pixel 3 XL file. Again, this was all before I noticed he had updated the official repo again and luckily it looks like he already took care of them. I know we're heading towards the end of the month already, but late is better than never I suppose... Can't wait til these bigger, more urgent new house projects are over with! This last week was basically dealing with 3 brand new toilets, but poorly placed water supply lines... and not realizing the new ones wouldn't fit til after one of the old ones was already taken out and thrown in the garbage. Among a million other projects... FUN!! I can't wait til I can get more than 3-4 hours of sleep in a row again, D:
i5lee8bit said:
Mikhail already updated the official repo with fixed files. Have you (or has anybody) tried the updated module yet? The comment on GitHub says that blueline and crosshatch were fixed.
Click to expand...
Click to collapse
Yes, the official v82 works on blueline. I appreciate the work you and Mikhail put into this!
I can relate on your house renovation work. I just went through one on our master bedroom and bath last year. It wasn't planned, but made necessary after the bath flooded when the tub drain seal failed. :-/ Since so much work had to be done anyway, we did some more things, including replacing faucets and the toilet.
So should we just grab the Edge Sense Plus apk online? Because it's no longer on the Play Store.
blksith0 said:
So should we just grab the Edge Sense Plus apk online? Because it's no longer on the Play Store.
Click to expand...
Click to collapse
It didn't show up for me when I searched either, but when I go here I can at least see this page with an "Installed" button:
https://play.google.com/store/apps/details?id=eu.duong.edgesenseplus
CSX321 said:
It didn't show up for me when I searched either, but when I go here I can at least see this page with an "Installed" button:
https://play.google.com/store/apps/details?id=eu.duong.edgesenseplus
Click to expand...
Click to collapse
Oh interesting. For me it's just a 404 page.
blksith0 said:
Oh interesting. For me it's just a 404 page.
Click to expand...
Click to collapse
Strange. I cleared my browser cache, and it still shows up. Are you signed into your Google account in your browser? I noticed that I get a 404 if I open it in incognito mode.
Hello,
First of all, yes I've read a lot on the subject and that's why I'm coming here because I'm getting confused.
Reason why I want to update magisk all of a sudden is: google pay no longer works, and I use it a lot so I really want it to work.
It used to work with magisk 23 (magisk hidden and google pay added to the list, as well as Google framework services and play store) but is stopped last night: I woke up to a warning saying my device doesn't meet security requirements. Clearing cache and data didn't help.
Since then I've read a lot on updating magisk (from the official website, to posts here and elsewhere) but what I don't get is: my phone is already rooted, do I really need a boot.img that I'll have to patch using magisk 25?
Can't I simply update magisk from 23 to 25 and it will work?
Thank you in advance for your help
Possibly related https://forum.xda-developers.com/t/discussion-google-pay-magisk-discussion-thread.3906703/page-129
Thank you, I've read that thread and I guess I'll address the Google pay question later, since I'm not on magisk 25.
Any input on my question?
Solved using this post:
Magisk General Support / Discussion
This is the place for general support and discussion regarding "Public Releases", which includes both stable and beta releases. All information, including troubleshoot guides and notes, are in the Announcement Thread
forum.xda-developers.com