Hey guys can someone help understand this error. I've taken a screen shot of it
It seems that this error is causing my Samsung members to be in French.
Another issue is software version showing XEF/XEF/VAU. Which is linked to the whole French language thing.
I've tried flashing using the original Vodafone firmware but doesn't seem to overwrite the current XEF revision
a bit more detail would help; you have what model with what firmware and trying to install what firmware?
Hi sorry for the lack of info
So originally I had purchased a note 10 plus sm-n975f model from Vodafone Australia. During the course of flashing using Odin it seems I may have flashed a BTU firmware which has made the default language French. I have since tried to flash original Vodafone Au firmware using home CSC and CSC however this error pops up. It seems it won't over write the CSC
rhath127 said:
Hi sorry for the lack of info
So originally I had purchased a note 10 plus sm-n975f model from Vodafone Australia. During the course of flashing using Odin it seems I may have flashed a BTU firmware which has made the default language French. I have since tried to flash original Vodafone Au firmware using home CSC and CSC however this error pops up. It seems it won't over write the CSC
Click to expand...
Click to collapse
If worst comes to worst...or just for ease, look into the app SamKey. Will allow you to change your csc without root.
Sent from my [device_name] using XDA-Developers Legacy app
Related
Hello from a newbie & sorry if this has been covered elsewhere, but I can't seem to find it anywhere for the 2014 edition.
I've bought a 32Gb LTE Note 10.1 2014 edition from Hong Kong and needless to say it comes with a heavily biased Chinese version of the operating system, now having read other fora, I have managed to understand how to flash the device using Odin, however I was after a UK (BTU) version of the rom, but what I have got is the Spanish one.
OK, I have no problem with it as I have changed all of the settings to use UK English, but I am looking for a way to change the CSC code to from PHE (Spanish) to BTU (UK) so that I can get any firmware updates for it.
The one thing I want to do is keep it as near to stock condition as possible, namely I don't want to root it (is that what it's called?).
Can someone please advise me how to do this please.
Thanks.
If you know how to flash the thing, just get a Spanish firmware from sammy mobile and flash it
I've also ordered a 605 from HK. I intend to flash this firmware.
I bought the P605 from Germany and it is unlocked but T Mobile branded. Can I flash the UK firmware ?
Thanks,
Halldor
Halldor said:
I bought the P605 from Germany and it is unlocked but T Mobile branded. Can I flash the UK firmware ?
Thanks,
Halldor
Click to expand...
Click to collapse
Sure
Gesendet von meinem GT-I9505 mit Tapatalk
@Ben81.
That despite it saying it's a BTU firmware isn't. It's the one I downloaded and is the Spanish one (PHE), I really do wish that those who provide these firmwares ensure that when they say it's from the UK it IS from the UK and when you do the flash it gives you the correct CSC code, when you plug it into Kies.
Thanks for the info. Will probably still flash that as it'll be better than the Chinese one!
EDIT: Installed it and can confirm it gives a PHE code.
Hye guys, not sure if this has been answered before - I did try and search all around for answers.
I have a note 10 + purchased in Australia - due to the delay in carrier updates I flashed a UK firmware (though the same SM-N975 firmware) for quicker updates.
However now that I have flashed back to my AU firmware - it seems the vendor file has been overridden and is locked possibly. As everytime I install a new firmware the set up screen shows in French until I switch the language to English AU. Once set up everything works fine apart from Samsung Members app - it shows in French which I now believe is due to the vendor file being locked?
Ive tried to odin flash Userdata with the Home CSC and CSC but no luck.
Any insight would help
thank you
Change CSC with Samkey.
Sent from my SM-N976B using Tapatalk
When i switched csc from ITL (italian) to THL (Thailand) samsung members changed from italian to Thailand even though i have english(uk) as the only language installed, even samsung pay and some others
Hello,
i bought a Note 10 plus 5G in Germany from mobil24 on Ebay. It works fine with my Telekom Sim.
But ther is a App called Start from Vodafone that i cannot uninstall.
Is there a way to delete/uninstall this app ?
Software
basis N976BXXS1ASJ8
build PPR1.180610.011.N976BXXS1ASJ6
anbieter SA0MC_SM-N976B_OVF_VOD_PP_015
RFCM90CF9RF
VOD/VOD/VOD
Thanks
Sebastian Neumann
Sebi1960 said:
Hello,
i bought a Note 10 plus 5G in Germany from mobil24 on Ebay. It works fine with my Telekom Sim.
But ther is a App called Start from Vodafone that i cannot uninstall.
Is there a way to delete/uninstall this app ?
Software
basis N976BXXS1ASJ8
build PPR1.180610.011.N976BXXS1ASJ6
anbieter SA0MC_SM-N976B_OVF_VOD_PP_015
RFCM90CF9RF
VOD/VOD/VOD
Thanks
Sebastian Neumann
Click to expand...
Click to collapse
It is part of the Vodafone firmware . You would have to flash unbranded firmware to remove the app . Is the phone network locked ?
If its doing no harm you can leave it there and just ignore it
The phone has no Simlock :
1 x Samsung Galaxy Note 10+ Plus 5G SM-N976B 256GB Aura Glow without Simlock New OVP
Will i get all regular Updates from Samsung (like Android 10) or do i get the updates from Vodafone ?
I´m confused.
Thanks
In Germany there are a couple of branded Firmwares out which are provider based.
You own a vodafone Note10+ which means you get OTA (Over the Air) Updates from a Samsung based by the provider overworked Firmware (normaly monthly).
You have the possibillity to remove the app via ADB or you can unbrand it with a open UK Firmware Countrycode BTU (no provider stuff on it).
Your current countrycode should be VD2 (Vodafone Germany).
If you are able to read german there is one big forum in Germany for android devices, take a look at android-hilfe.
if there is no simlock on the device, its also not against a law to 'rebrand' it with an other firmware.
Before starting this take a closer look here or in other forums to inform you about flashing an Samsung Firmware with a tool called odin (for Windows).
you can download the newest firmwares on sites like sammobile.com.
But don't do it hastily until you've read your way into the matter!
This is my Firmware. Could I flash DBT or DTM without problems ?
The unbranded Firmware for Germany is DTM ?
1. Don,'t know if this will work without any problems, if you can read and understand German take a look on the Android Hilfe forum there is a thread discribing unbranding.
https://www.android-hilfe.de/forum/...anding-auch-beim-note-10-moeglich.929549.html
2. Open Germany is DBT (which stands for debitel, now mobilcom debitel).
DTM is Deutsche Telekom which is also branded
On the other side, all this to only get rid of one app...
Have you tried to deactivate the app under settings - apps - three-point-menu (upper right corner) - show system apps.
Then Navigate to the app and tap on deactivate in app settings
since a couple of years branding (in Germany) is shrinked to one or two provider apps.
Also OTA Updates are nearly as fast as for the Open Germany DBT.
My last action in rebranding was on an Galaxy S7 so I can not say if debranding the Note10+ from VD2 to DBT works with out problems and afterwards fully access to OTA Updates.
Sent from my SM-N950F using XDA Labs
Hello,
thanks for all this information.
I did get a Update for the phone already. It was the Securitypatch 1. November 2019.
I have a Deutsche Telekom Sim in the phone. It works without problems .
So i will get Android 10 sometime OTA with my Telekom Sim too ?
It´s not possible to stop and deactivate this App.
Thanks again for your help.
Sure you will get Android 10 also with this card, as soon it was released here in Germany for VD2
Sent from my Samsung SM-N975F using XDA Labs
Hello,
i looked at Androidhilfe.de and followed the instructions at the thread https://www.android-hilfe.de/forum/...anding-auch-beim-note-10-moeglich.929549.html.
I used SamFirm to find a BTU Firmware (2019-10-30). I flashed it with Odin (normal CSC )
and got a clean phone.
Now my note 10 + 5g is debranded. No more Vodafone App. I´m on XEF/XEF/VOD now.
Today there was again a newer Verson of BTU Firmware (2019-11-13)
I flashed that with Odin3 3.13.3 using homeCSC .
My phone got updatet with no dataloss.
So my problem is solved
Thanks again for helping.:good:
Had a similar problem with my DTM (Telekom) branded Note10+.
Just flash the newest DBT FW with the home csc and you'll get the unbranded version without vodafone apps.
Also you'll get updates much faster.
siedenburg said:
Had a similar problem with my DTM (Telekom) branded Note10+.
Just flash the newest DBT FW with the home csc and you'll get the unbranded version without vodafone apps.
Also you'll get updates much faster.
Click to expand...
Click to collapse
Is there a DBT Firmware for the Note 10+ 5G
I didn´t find one yet.
I had to search a bit, but couldn't find an unbranded version for the german market.
Also it could be difficult to get 5G with a different country firmware because it's new, regulations and stuff.
But you could flash at leats the DTM firmware, so you'll get telekom preinstalled apps
https://www.sammobile.com/samsung/g...e/SM-N976B/DTM/download/N976BXXS1ASJ6/299627/
Hi to all.
Last week I got A50. During first boot of system I didnt inserted SIM card ant it seems that it triggered installing firmware for diferent region. Im located in Serbia but firmware is for Turkey and I have many apps on turkish language without posibility to change language in those apps.
Is any method to change CSC?
Thanks in advance!
Ok, no answer yet. Maybe to precise my question,
Could someone tell me which files I need to use to change my current CSC Turkey to lets say Israel CSC ILO.
I suppose it could be done with Odin but which versions of firmware...
Thanks
Alexxxx1 said:
Ok, no answer yet. Maybe to precise my question,
Could someone tell me which files I need to use to change my current CSC Turkey to lets say Israel CSC ILO.
I suppose it could be done with Odin but which versions of firmware...
Thanks
Click to expand...
Click to collapse
Did you learn how to do?
Sent from my [device_name] using XDA-Developers Legacy app
Nope, Im totaly disapointed in comunity in section for model A50. There is no answers, there is no tutorials, there is no custom roms except two of them, and I will probably sell this phone.
Regards
Sent from my SM-A505F using Tapatalk
you should download https://www.sammobile.com/samsung/galaxy-a50/firmware/SM-A505F/TUR/download/A505FDDU4BTC9/330469/ this version, and use odin to flash it in your phone. Keep the sim in the phone for the process, because with that it will verify you are in turkey.
Although in odin the process may work if you use the HOME_CSC file to keep the data of your phone intact, i would suggest using the other file, because with that you'll have a fresher device
Hi All,
I have read that to debrand a Samsung Galaxy S20 phone (mine is SM-G981B) you can't just do a straight flash with Odin using debranded firmware and that you instead need to first change the CSC using SamKey. However my issue is that the CSC for the carrier my phone is currently on (United Kingdom EE) seems to be the same as debranded firmware (United Kingdom BTU). You can see here: sammobile.com/samsung/galaxy-s20/firmware/SM-G981B/BTU they both have the same CSC (G981BOXM1ATCT).
I also came across this guide: samsungsfour.com/tutorials/how-to-install-stock-rom-on-galaxy-s20-s20-plus-s20-ultra-s20-5g.html for debranding, however without any other sources to back it up, I am a bit reluctant to try it out in case it causes any issues.
Any help with this would be greatly appreciated thanks.
Rave7 said:
Hi All,
I have read that to debrand a Samsung Galaxy S20 phone (mine is SM-G981B) you can't just do a straight flash with Odin using debranded firmware and that you instead need to first change the CSC using SamKey. However my issue is that the CSC for the carrier my phone is currently on (United Kingdom EE) seems to be the same as debranded firmware (United Kingdom BTU). You can see here: sammobile.com/samsung/galaxy-s20/firmware/SM-G981B/BTU they both have the same CSC (G981BOXM1ATCT).
I also came across this guide: samsungsfour.com/tutorials/how-to-install-stock-rom-on-galaxy-s20-s20-plus-s20-ultra-s20-5g.html for debranding, however without any other sources to back it up, I am a bit reluctant to try it out in case it causes any issues.
Any help with this would be greatly appreciated thanks.
Click to expand...
Click to collapse
Mate, all you need to do is change the csc to BTU in order to debrand. EVR and BTU csc are part of the same multi csc, however change your csc to BTU if you do not want any carrier bloatware or boot image etc.
So the only way to debrand is to use samkey? There is not a free/not payed alternative?
west2cool said:
Mate, all you need to do is change the csc to BTU in order to debrand. EVR and BTU csc are part of the same multi csc, however change your csc to BTU if you do not want any carrier bloatware or boot image etc.
Click to expand...
Click to collapse
Thank you very much, I'll give that a go.
denzel09 said:
So the only way to debrand is to use samkey? There is not a free/not payed alternative?
Click to expand...
Click to collapse
Denzel09, you can buy a single SamKey credit on eBay for £2.25 just to let you know. Search for SamKey, sort by cheapest and set "Item Location" to Worldwide.