Develop Bugs

[q] asking about phone brick!

When I finish restore my back up, I reboot my phone and it get brick (JUGG 5.0)!!! I cannot even press any button to turn the screen on!! Already try with different charger, battery and sim card also!! Does someone have any idea please!!

Try the long power button press. Press the power button and hold it for like 10 seconds (Maybe more, it always feels more then 10 seconds). The phone should vibrate 3 times and then you release.
If that doesn't work, then see if you can get into download mode and get Odin to recognize your phone.

I already try, I press it nearly 1 minute, but the screen doesn't turn on!

what exactly are you doing? you were making a backup in cwm, it finished and then you rebooted?

I flash a new Rom, but I don't like it. So I use Darkside Superwipe to wipe all cache and data of that Rom so that I can do the back up. After the back up process is finished,(I see everything runs well). I reboot the phone and it gets brick.

gunbreak said:
I flash a new Rom, but I don't like it. So I use Darkside Superwipe to wipe all cache and data of that Rom so that I can do the back up. After the back up process is finished,(I see everything runs well). I reboot the phone and it gets brick.
Click to expand...
Click to collapse
I am not quite understanding. You made backup, or did you restore a backup that you previously made? Anyways, If the phone wont boot try to put in in dl mode and odin it back to stock.

xcrazydx said:
I am not quite understanding. You made backup, or did you restore a backup that you previously made? Anyways, If the phone wont boot try to put in in dl mode and odin it back to stock.
Click to expand...
Click to collapse
Oh I understand u, I restore my back up. How can I put it in the mode that you say? I can't even turn the screen on can you please help me!

gunbreak said:
Oh I understand u, I restore my back up. How can I put it in the mode that you say? I can't even turn the screen on can you please help me!
Click to expand...
Click to collapse
Before you try to odin it, can you get into cwm by holding the volume up, down, and power. Release power when first samsung logo appears. stay holding vol buttons until cwm pops up. can you get into this?

xcrazydx said:
Before you try to odin it, can you get into cwm by holding the volume up, down, and power. Release power when first samsung logo appears. stay holding vol buttons until cwm pops up. can you get into this?
Click to expand...
Click to collapse
No, it doesn't work. All the buttons freeze now

You most likely are hard bricked, but you still have a slight chance to get into download mode. Not sure how you managed a brick by restoring a backup, but I'll try to help.
Ok, you are going to need the drivers for your phone. http://www.mediafire.com/file/6onrjbyd46j4lhj/T-Mobile_t989_GSII_ADB_Drivers.zip
You need odin as well, download it. http://www.mediafire.com/?u868rqz4qn0ta34
These links were provided by KonstantinKeller
Go here http://www.sammobile.com/firmware/ and make an account. I use sammobile because it contains everything in one shot. No need to get radio and crap from other places. After you make an account go to firmware section and type t989 in the search box. download the t989uvkid. ASSUMING YOU HAVE AMERICAN T989
After you have completed the download you are going to need to unzip it with 7zip to extract the tar.
Plug the USB cable into your computer, without plugging it into your phone.
Hold VOL UP + VOL DOWN while plugging in the USB cable to your phone. Stop holding buttons when the ''Warning'' appears.
Press Volume UP and start ODIN (Run as Admin on Vista and 7, just to be safe)
Click PDA and locate the MD5 file you extracted earlier.
WAIT FOR ODIN TO RECOGNIZE YOUR PHONE. THE COM PORT WILL TURN YELLOW AND HAVE A NUMBER
MAKE SURE NOTHING BUT AUTO REBOOT IS CHECKED!!!!!!!
Press 'Start' and be patient. It will take a few minutes because it is a large file.
phone will reboot automatically.
If you can't get the phone to be recognized try different usb ports or a different computer if you have another. This may not work at all, considering it sounds like you are hard bricked. Good luck!

I should download T989UVKID or T989UVKL1? I think my phone get android 2.3.6

gunbreak said:
I should download T989UVKID or T989UVKL1? I think my phone get android 2.3.6
Click to expand...
Click to collapse
it won't matter. if you want the newest grab kL1

Window told me "no driver found" after I already installed the samsung driver!

gunbreak said:
Window told me "no driver found" after I already installed the samsung driver!
Click to expand...
Click to collapse
Delete that driver setup and use kies. http://www.samsung.com/us/kies/

I think it already died, no driver found again. I try in device manager, it appears as Samsung Android ADB interface, but nothing appears on my screen it's such a hard brick....

gunbreak said:
I think it already died, no driver found again. I try in device manager, it appears as Samsung Android ADB interface, but nothing appears on my screen it's such a hard brick....
Click to expand...
Click to collapse
Just do this and see if it goes into DL mode.
Plug the USB cable into your computer, without plugging it into your phone.
Hold VOL UP + VOL DOWN while plugging in the USB cable to your phone. Stop holding buttons when the ''Warning'' appears.
If not, you have 2 options
Send to this guy for jtag repair for $50 http://mobiletechvideos.mybigcommerce.com/
OR warranty it through samsung

I should warranty it through Samsung or ask for replacement phone through Tmobile? (I have insurance in my plan). I wonder if Tmobile find out my phone is rooted and I have to pay for the replacement phone. Do you have any idea?

gunbreak said:
I should warranty it through Samsung or ask for replacement phone through Tmobile? (I have insurance in my plan). I wonder if Tmobile find out my phone is rooted and I have to pay for the replacement phone. Do you have any idea?
Click to expand...
Click to collapse
You can go to the tmobile store and tell them it wont turn on. you wont need your insurance plan, the phone carries a warranty against defects for 1 year. Just play dumb and say it wont turn on and demand a new phone.

Do u have any idea if Tmobile check the phone or not?

gunbreak said:
Do u have any idea if Tmobile check the phone or not?
Click to expand...
Click to collapse
They can't tell anything if it's hard bricked. You're fine man, Get a new one.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2

sgw hard brick

hi all, my sgw hard brick because i wrong flash kernel, any idea to unbrick.
I had tried this method , but still cant power on.
1. Unplug your phone from usb
2. Take out battery (and mini sd and sim)
3. Plug usb back into phone.
4. Hold down up and down volume keys while putting battery back into the phone.

WOW..!! You got it bro..!!
I also had a HardBrick and I'm very confused how to unbrick my SGW.
I'm looking for many thread and post about unbrick the HardBrick, but I just got same answer.
so., Solution for your problem is "Change the PDA/MainBoard"

Theres a solution on that.. just search here..

skylai82 said:
hi all, my sgw hard brick because i wrong flash kernel, any idea to unbrick.
I had tried this method , but still cant power on.
1. Unplug your phone from usb
2. Take out battery (and mini sd and sim)
3. Plug usb back into phone.
4. Hold down up and down volume keys while putting battery back into the phone.
Click to expand...
Click to collapse
eza azami said:
WOW..!! You got it bro..!!
I also had a HardBrick and I'm very confused how to unbrick my SGW.
I'm looking for many thread and post about unbrick the HardBrick, but I just got same answer.
so., Solution for your problem is "Change the PDA/MainBoard"
Click to expand...
Click to collapse
hi bro, u r correct, I go samsung service center, answer is change main board. design too bad, may be main samsung factory no send out how to re-flash phone for all samsung service center.
And samsung android system without fastboot / hboot. maybe only jtagbox can help us.
sad sad... no more support samsung, I ready change to suppot miui phone xiaomi2. cheap and powerfull hardware the android system support fastboot like sony and htc.
pre-order now...

skylai82 said:
hi bro, u r correct, I go samsung service center, answer is change main board. design too bad, may be main samsung factory no send out how to re-flash phone for all samsung service center.
And samsung android system without fastboot / hboot. maybe only jtagbox can help us.
sad sad... no more support samsung, I ready change to suppot miui phone xiaomi2. cheap and powerfull hardware the android system support fastboot like sony and htc.
pre-order now...
Click to expand...
Click to collapse
http://androidforums.com/vibrant-tips-tricks/223806-guide-fixing-bricks-odin-errors.html
NO-BOOT BRICKS
This is where your phone does NOT turn on, no combo of buttons works and power button does nothing.
DO THIS ONLY WHEN YOU PLUG IN YOUR PHONE AND NOTHING SHOWS UP ON THE SCREEN!!! If else, follow the steps from above.
This method is basically same as above, EXCEPT the way you get into Download Mode as your phone is HARD BROKEN.
1. Download all the files required in the "SOFT BRICKS" section of this post.
2. Remove everything from your phone (SD card, sim, battery).
3. Plug your phone into your computer WITHOUT the battery, as you have already taken it out in the last step.
4. Press and HOLD vol. up and vol. down.
5. As you are HOLDING these buttons, reattach your battery.
6. You should be in Download Mode.
7. Unplug phone from USB
8. Follow steps 4-8 from the "SOFT BRICKS" section.
Troubleshooting:
-Odin stuck at some random process?
*Switch to another odin
*Make sure you did NOT check repartition, if you did, just repeat all the steps over again, of course for the downloading parts, obviously.
-Phone not responsive?
*Try the hard brick section right under
-Phone stuck at Galaxy S logo screen?
*Put it in to DL mode, and run Odin again, it's just a bad install.
-All three ODIN is nonfunctional, stuck or giving "FAILED" errors?
*DO NOT CLOSE ODIN ONCE IT HAS FAILED!
*Unplug your phone
*Replug in your phone, get it into DL mode
* Unplug once it is in DL mode
*Replug and ODIN should recognize your phone
*Leave all the settings the same, then click "Start" again.

skylai82 said:
http://androidforums.com/vibrant-tips-tricks/223806-guide-fixing-bricks-odin-errors.html
NO-BOOT BRICKS
This is where your phone does NOT turn on, no combo of buttons works and power button does nothing.
DO THIS ONLY WHEN YOU PLUG IN YOUR PHONE AND NOTHING SHOWS UP ON THE SCREEN!!! If else, follow the steps from above.
This method is basically same as above, EXCEPT the way you get into Download Mode as your phone is HARD BROKEN.
1. Download all the files required in the "SOFT BRICKS" section of this post.
2. Remove everything from your phone (SD card, sim, battery).
3. Plug your phone into your computer WITHOUT the battery, as you have already taken it out in the last step.
4. Press and HOLD vol. up and vol. down.
5. As you are HOLDING these buttons, reattach your battery.
6. You should be in Download Mode.
7. Unplug phone from USB
8. Follow steps 4-8 from the "SOFT BRICKS" section.
Troubleshooting:
-Odin stuck at some random process?
*Switch to another odin
*Make sure you did NOT check repartition, if you did, just repeat all the steps over again, of course for the downloading parts, obviously.
-Phone not responsive?
*Try the hard brick section right under
-Phone stuck at Galaxy S logo screen?
*Put it in to DL mode, and run Odin again, it's just a bad install.
-All three ODIN is nonfunctional, stuck or giving "FAILED" errors?
*DO NOT CLOSE ODIN ONCE IT HAS FAILED!
*Unplug your phone
*Replug in your phone, get it into DL mode
* Unplug once it is in DL mode
*Replug and ODIN should recognize your phone
*Leave all the settings the same, then click "Start" again.
Click to expand...
Click to collapse
Is this method worked with you ?

you hold the wrong button..
while you plugin the charge/usb cable, hold power button+vol down(not both up&down,only down)+home button then put again your battery..
if it still like that just go to ssc..
Sent from my GT-I8150 using Tapatalk 2

stpdkid said:
you hold the wrong button..
while you plugin the charge/usb cable, hold power button+vol down(not both up&down,only down)+home button then put again your battery..
if it still like that just go to ssc..
Sent from my GT-I8150 using Tapatalk 2
Click to expand...
Click to collapse
Try already.. also no working....

skylai82 said:
Try already.. also no working....
Click to expand...
Click to collapse
Send for phone repair shop, repair price RM150.00
Shop girl told me change Main board, actual no! imei number still same.

skylai82 said:
Send for phone repair shop, repair price RM150.00
Shop girl told me change Main board, actual no! imei number still same.
Click to expand...
Click to collapse
Means u got cheated with a software solution since imei no change which means same board?

egagah said:
Means u got cheated with a software solution since imei no change which means same board?
Click to expand...
Click to collapse
yes.

skylai82 said:
yes.
Click to expand...
Click to collapse
Oops what happened here ? I thought I wanted to share a solution...NVM

[Q] Did a MEGA WIPE on SGH-I747 and have completely deleted everything. Plz help?

I would like to apologize in advance if I posted in the wrong category (I think it's the right category). As the title says I have done a mega wipe with my Samsung Galaxy S3 (SGH-I747) and completely removed the OS along with the System Recovery and everything. It is basically just the phone and nothing inside. When I plug it in the computer, my windows OS makes a sound signaling it detected a device but then nothing happens. I do see a red light turning on my Galaxy S3, I think it says it's charging. Tried accessing the recovery mode, but no luck.... So my question is...is there any way to reflash an OS? Thank you so much XDA!!

If you can get to download mode, you can use Odin to flash a rom. Why would you wipe the recovery partition?

You need some JTAG action.

strawhatluffy28 said:
I would like to apologize in advance if I posted in the wrong category (I think it's the right category). As the title says I have done a mega wipe with my Samsung Galaxy S3 (SGH-I747) and completely removed the OS along with the System Recovery and everything. It is basically just the phone and nothing inside. When I plug it in the computer, my windows OS makes a sound signaling it detected a device but then nothing happens. I do see a red light turning on my Galaxy S3, I think it says it's charging. Tried accessing the recovery mode, but no luck.... So my question is...is there any way to reflash an OS? Thank you so much XDA!!
Click to expand...
Click to collapse
Hi My friend this is happened for me b4 and this what I did
1- take your battery out for about 5 Minutes.
2- Download Odin and The firmware orginal no rooting no custom recovery ** I started with ICS from Samsung-update.com***
3- Start Odin Don't add firmware yet.
4- Put your phone in Download mode by holding Volum down+ home+power and when the screen come push volum up to go to download mode.
5- Now connect your phone to PC and Odin will see your phone on which com.
6- Now add the Firmware by clicking on PDA when it say ready just click start on odin.
7- You are back on orginal Rom ( No root or Custom recovery) and you can go from there.
Good Luck
IF I Help Hit Thank Botton

saj222 said:
You need some JTAG action.
Click to expand...
Click to collapse
I can't even access the Download mode part , is there a thread that could point me in the right direction for JTAG? (wtv that is :S) Thanks!

strawhatluffy28 said:
I can't even access the Download mode part , is there a thread that could point me in the right direction for JTAG? (wtv that is :S) Thanks!
Click to expand...
Click to collapse
JTAG repair is done to your phone by an expert with special equipment. You would need to bring your phone to them or ship it off to be fixed. Google '(your city) Jtag repair' . No boot but still having a sound from connecting to PC is a good sign that your bootloader is corrupted.

If the computer makes as noise when you plug it in, try for download mode... Even If the screen of the phone doesn't turn on try to connect and use Odin, sometimes Odin will pick it up...
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

[Q] can't use recovery mode.

Hello my friends.
I got a Galaxy Note II here - but my sister decided to play with it and now its locked on the 'too many wrong patterns screen'.
To make things even worst i haven't associated it with a google account (i recently bought it from a friend of mine).
When i try to hard-reset it the phone goes to the famous android logo with red exclamation - i think he rooted the phone and didn't told me.
Anyway when i get on this screen if i press the 'back' key on the phone i can access the 'Android System Recovery' - but i can't select any option.
I know i should use vol up/down to scrool betweeen options and power to select - but i press power and nothing happens.
Tried also pressing the menu button - nothing happened also.
Another problem is, for some reason i don't know the phone won't connect to my computer - only in charge mode.
Tried tons of things lots of times but it isn't showing up no matter what i do.
I tried also to call me from another phone and get in any menu - but when i do that i can only select normal options (send an sms, refuse call, accept).
I would like to hear suggestions from you guys since i've ran out of resources - i don't know what else i can do in order to recover the phone.
Thanks in advance
additional note: i just know its model is i9220+
It accepts WCDMA and a GSM SIM.
Pablo

oh yeah
those are the things i readed in order to find *ANY* solution:
http://forum.xda-developers.com/showthread.php?t=1420273
http://forum.xda-developers.com/showthread.php?t=1946968
http://forum.xda-developers.com/showthread.php?t=817703
http://forum.xda-developers.com/showthread.php?t=997974
http://forum.xda-developers.com/showthread.php?t=1266172
http://forum.xda-developers.com/showthread.php?t=1266172

if you don't have any important stuff on the phone...why don't you just flash it with stock firmware using Odin?? in download mode?
Sent from my GT-N7105 using Tapatalk 4

dead soul said:
if you don't have any important stuff on the phone...why don't you just flash it with stock firmware using Odin?? in download mode?
Sent from my GT-N7105 using Tapatalk 4
Click to expand...
Click to collapse
This is what i want.
But my computer do not detect the phone so i can't go into download mode.
I don't have anything important there - not worried about what is on its memory.
like i said when i plug the phone into the computer it only starts charging and nothing more.
is there 'any trick' i can try heh ?
ps: i installed kies, uinstalled, installed samsung usb drivers, installed, etc...well what i mean is that i tried most of those tricks to get the phone detected but no success - maybe flashing directly from my SD ?
also - i 'suspect' my phone is that n7100 . since i don't have its manual and can't access its menu either i just suspect because its from brazil and those n7100 models are like 'international'.

pablobhz said:
This is what i want.
But my computer do not detect the phone so i can't go into download mode.
I don't have anything important there - not worried about what is on its memory.
like i said when i plug the phone into the computer it only starts charging and nothing more.
is there 'any trick' i can try heh ?
ps: i installed kies, uinstalled, installed samsung usb drivers, installed, etc...well what i mean is that i tried most of those tricks to get the phone detected but no success - maybe flashing directly from my SD ?
also - i 'suspect' my phone is that n7100 . since i don't have its manual and can't access its menu either i just suspect because its from brazil and those n7100 models are like 'international'.
Click to expand...
Click to collapse
ok from how you are explaining stuff I'm not sure if you understand the flashing procedure thoroughly and risk involved
1. flashing can be risky
2. you need to download Odin example version 1.8
3. when your phone just powers on you need to know the EXACT model number example N7105 or N7100 or any other version..this is very important as if you flash a wrong firmware you could destroy your phone completely
4. find a stock ROM for your phone on xda or at samfirmware.com
5. install Samsung drivers or install Samsung kies but while Odin is on Samsung kies services must be closed
6. keep your phone in download mode by switching off your phone then HOLD CENTER/HOME BUTTON + VOLUME DOWN + POWER BUTTON
7. your phone may warn you and I believe may ask you to press volume up button to continue
8. then you are now in download mode.
9.open Odin
10. connect your phone to your pc via USB cable..give it time to register/install itself as a new hardware..etc etc as you may see new hardware detected pop up if running on Windows
10. a yellow COM port will appear on Odin showing the phone is connected
11. place the stock ROM file on the PDA section UNTICK REPARTITION , TICK REBOOT
12. this should flash your phone....however my procedure is a vague way of how to go about it... you may need to see a detailed step by step procedure on XDA if you are new to this.
I take no responsibility for any damages...I hope you almost everything we do here on XDA had risks involved
or the safer option take to a Samsung repair center!!
Sent from my GT-N7105 using Tapatalk 4

To get into download mode all you need to do is turn of the phone and hold power home volume down until you see the warning sign.
Sent from my SAMSUNG-SGH-I317 using xda premium

Put device on download mod and tell us what information it displays
You need not to connect device with PC to get downbload mode. Do this.
Vol Down + Home + Power
then vol up in warning screen to finally get download mod.

dr.ketan said:
Put device on download mod and tell us what information it displays
You need not to connect device with PC to get downbload mode. Do this.
Vol Down + Home + Power
then vol up in warning screen to finally get download mod.
Click to expand...
Click to collapse
Okay
when i put the device into download mode (vol down + home + power) - it goes to a 'factory mode'
then options i have here are:
Full Test
Item Test
Test Report
Clear eMMC
Version
Reboot
And i can't choose any of 'em , no matter what i press.
Same happens when i go into recovery mode.
For getting into recovery o mode i i press the following combination: vol up + home + power
Then i get the android logo when a red exclamation - but when i press the 'back' button i can get into the "Android System Recovery <3e>", where i have the following options:
Reboot System Now
apply update from sdcard
apply update from cache
wipe data/factory reset
wipe cache partition
backup user data
restore user data
and same thing - i can't select any of 'em - no matter what button combination i press.
I tried plugging the phone into three computers none of 'em detected the phone.
Sometimes after many power on/off the computer detects it but instantly loses also - its something very quickly.
I can't get into any of the menus of the phone since i'm stuck in the 'too many wrong patterns' screen and i have no associated google account.
Also when i plug the phone in the pattern screen the only thing it says its about charging - nothing about plug in usb or anything like that.
I'm a bit used with flashing (did it a lot on my RAZR XT910) and i know all risks.
I've also found out my note ii is model GT-N7100 (this is the one sold in brazil) - i couldn't get its manual but my bet is going to be this - samsung service center won't repair the phone without the fiscal coupon .
I'll try more and keep this post update - but if anyone got an hint about this just tell me
Thanks in advance
Pablo

Your device seems to be clone one and not original N7100.
Have you purchased from authorized centre?
Sent from my GT-N7100 using xda premium

Your device is not a Samsung phone, you said as much in your first post.
Asking us to help is pointless, you need to talk to other clone owners and see what they have done.

muppetmania said:
Your device is not a Samsung phone, you said as much in your first post.
Asking us to help is pointless, you need to talk to other clone owners and see what they have done.
Click to expand...
Click to collapse
Oh okay.
I tought it also but wasn't sure.
I'm really sorry for taking your time
It was looking like Samsung because of its back
There's an stick with:
MODEL: i9220+
FCC ID: A3L SHI9220+
For information call: 1 888 987 4357
Bluetooth
CE01688
IMEI
and Made in Korea
There are also entries to:
WCDMA SIM
GSM SIM
and SD Card
But when i power it on there's nothing related to Samsung in fact - i never get anything related to Samsung.
Only android logo like a rocket.
It seems to be running an android 4.1 because of the interface
Anyway i'll see what i can do and thanks in advance for all the help
Again, sorry for taking your time.
Pablo
EDIT:
A Thhread talking about my phone:
http://forum.xda-developers.com/showthread.php?t=1909516
It seems its a Note II Clone really.
I'll keep searching information around XDA and google.
Again, thanks in advance

Needs help to unbrick my note 8

USB seems disconnected during loading system to note 8 n5110 and as a result, it stocks at "Firmware upgrade encourtered an issue. Please select recovery mode in Kies and try again". It showed no response to power key and home key. Is there any hope to reload the boot and related files to the device again for unbrick and how? Thanks a lot.

dlwei said:
USB seems disconnected during loading system to note 8 n5110 and as a result, it stocks at "Firmware upgrade encourtered an issue. Please select recovery mode in Kies and try again". It showed no response to power key and home key. Is there any hope to reload the boot and related files to the device again for unbrick and how? Thanks a lot.
Click to expand...
Click to collapse
So are you able to power the device on and off currently? Are you able to get into download mode?

CCallahan said:
So are you able to power the device on and off currently? Are you able to get into download mode?
Click to expand...
Click to collapse
I cannot power on and off the device. I can get into download mode, but odin cannot find the device in this mode.

dlwei said:
I cannot power on and off the device. I can get into download mode, but odin cannot find the device in this mode.
Click to expand...
Click to collapse
Just curious but how are you turning it on? Physically connecting the battery?
Make sure you have the Samsung device driver installed on the PC. Also might try it on another PC if you have that option and see if Odin can connect to device.
If Odin will not work might try using Heimdall: http://forum.xda-developers.com/showthread.php?t=755265

CCallahan said:
Just curious but how are you turning it on? Physically connecting the battery?
Make sure you have the Samsung device driver installed on the PC. Also might try it on another PC if you have that option and see if Odin can connect to device.
If Odin will not work might try using Heimdall: http://forum.xda-developers.com/showthread.php?t=755265
Click to expand...
Click to collapse
As I said, I cannot turn it on or off. It is on when it has power. Yes, you are right, the battery is solided on the device, so I cannot take the battery off.
I have samsung decive driver installed on my PC. Without going into download mode, the PC and Odin at least can find the device, although PC only recognized it as a moderm.

dlwei said:
As I said, I cannot turn it on or off. It is on when it has power. Yes, you are right, the battery is solided on the device, so I cannot take the battery off.
I have samsung decive driver installed on my PC. Without going into download mode, the PC and Odin at least can find the device, although PC only recognized it as a moderm.
Click to expand...
Click to collapse
Might try Heimdall and see if you have any luck with that. Link is in my previous post. Otherwise, not sure what you can do besides taking the tablet in for repair.
**Gave you your first "Thanks" just to get you started. **

CCallahan said:
Might try Heimdall and see if you have any luck with that. Link is in my previous post. Otherwise, not sure what you can do besides taking the tablet in for repair.
**Gave you your first "Thanks" just to get you started. **
Click to expand...
Click to collapse
It finally works using another PC. :highfive::highfive::highfive::highfive::highfive::highfive::highfive:

I'm facing the same issue , how did u get into download mode

Download Mode
Verymalignant said:
I'm facing the same issue , how did u get into download mode
Click to expand...
Click to collapse
First, Tablet needs to be switched off. Then, press "Power" and "Volume Down" buttons together. Once the screen lightens, release the buttons and follow the instructions on the screen.
In case you need to go to recovery mode, press "Power" and "Volume Up" buttons together (also the tablet must be switched off first).

I bricked mine trying to go back to stock rom ?