Related
I just got moto 360 and the time is wrong on the watch how can i get it to the correct time its currently 8 mins off.
restart
humpty123 said:
I just got moto 360 and the time is wrong on the watch how can i get it to the correct time its currently 8 mins off.
Click to expand...
Click to collapse
I had the same problem and restarted my device. At first it displayed the same (incorrect) time, but then it quickly changed to the correct time. Mine was about 20mins ahead.
not fixed...
melscheld said:
I had the same problem and restarted my device. At first it displayed the same (incorrect) time, but then it quickly changed to the correct time. Mine was about 20mins ahead.
Click to expand...
Click to collapse
A few hours post-restart and it looks like the time is off again. It seems to be a cumulative effect...
Fix
humpty123 said:
I just got moto 360 and the time is wrong on the watch how can i get it to the correct time its currently 8 mins off.
Click to expand...
Click to collapse
I had the same issue - got mine a few days ago - after reading the post here I did a full device reset and set it up again with my phone. Been going for about a day and no issues. I wonder if it was an issues with having the new update right out of the box. Who knows. But if your having this issue a quick reset and setup and no issues. Will repost if something changes.
Moto 360: consistently wrong time now
alandashby said:
I had the same issue - got mine a few days ago - after reading the post here I did a full device reset and set it up again with my phone. Been going for about a day and no issues. I wonder if it was an issues with having the new update right out of the box. Who knows. But if your having this issue a quick reset and setup and no issues. Will repost if something changes.
Click to expand...
Click to collapse
I've had my Moto 360 for over a week now ... love it, recommend it to everyone I know
But I'm having the same problem now. My watch just won't keep time, and it's getting worse and worse (i.e. farther off of the real time). Everything else seems fine - I still get notifications so I know the watch is paired to my phone correctly, my phone's time is set by the carrier and remains correct throughout the day, etc. But now my Moto 360 will "slip" forwards in time by over 20 minutes! I have to double-check the time on my phone every time I check on my watch now, which needless to say is not a very good feature in a watch.
Restarting the watch and reconnecting in Android Wear does fix the time syncronization, but having to reboot my watch a couple times a day is not very desirable obviously. I've reset my watch (Reset device in settings) twice now, rebooted my phone, wiped Android Wear's settings on my phone and uninstalled then reinstalled it - same thing, incorrect time on my watch after anywhere from 1 to 6 hours.
It was perfectly fine when I first got it, and perfectly fine (even better!) after the update. It would be marginally less awful if I could re-sync the time without having to restart my watch, but disconnecting via Android Wear and/or turning Bluetooth off then on again, un-pairing the watch then re-pairing it, etc., all have no effect for me. Super lame :crying:
If I could manually set the time, I could deal with that.
I have time problems as well, but only....
chimpster said:
I've had my Moto 360 for over a week now ... love it, recommend it to everyone I know
But I'm having the same problem now. My watch just won't keep time, and it's getting worse and worse (i.e. farther off of the real time). Everything else seems fine - I still get notifications so I know the watch is paired to my phone correctly, my phone's time is set by the carrier and remains correct throughout the day, etc. But now my Moto 360 will "slip" forwards in time by over 20 minutes! I have to double-check the time on my phone every time I check on my watch now, which needless to say is not a very good feature in a watch.
Restarting the watch and reconnecting in Android Wear does fix the time syncronization, but having to reboot my watch a couple times a day is not very desirable obviously. I've reset my watch (Reset device in settings) twice now, rebooted my phone, wiped Android Wear's settings on my phone and uninstalled then reinstalled it - same thing, incorrect time on my watch after anywhere from 1 to 6 hours.
It was perfectly fine when I first got it, and perfectly fine (even better!) after the update. It would be marginally less awful if I could re-sync the time without having to restart my watch, but disconnecting via Android Wear and/or turning Bluetooth off then on again, un-pairing the watch then re-pairing it, etc., all have no effect for me. Super lame :crying:
If I could manually set the time, I could deal with that.
Click to expand...
Click to collapse
My time-problems comes only when I load any of the clockfaces from "Facer", then it goes a whole hour off.
Some watch faces do not move the hour hand until the second hand advances thru the full hour. Could that be the case?
I got the same problem!!
It was 15 mins ahead and all the sudden the time was corrected by itself...
humpty123 said:
I just got moto 360 and the time is wrong on the watch how can i get it to the correct time its currently 8 mins off.
Click to expand...
Click to collapse
Just restart the watch. Once it pairs again, the time will be set correctly.
sreymj said:
Just restart the watch. Once it pairs again, the time will be set correctly.
Click to expand...
Click to collapse
This is not a solution?? You can't look at the watch and not be able to trust the time, without checking your phone to see if it's right?? then sync again. It's a watch!!! It's it's core job. It should be able to be trusted to be right!!!
Mine has been out between 5 and 15 mins 3 times in the last 2 days, always fast. So not a refresh of screen issue.
I use Facer too, but even when I swipe to a standard watch face they are out too, until I do some sysnc with the phone.
I'm going to keep on a standard watch face today, and see what happens. Can't it really be facer? surly it just report the time on the device, will not change anything??
i have reported to Moto too, they know of no issue. Suggest everyone does the same.
On moto forum too;
https://forums.motorola.com/posts/75d3867b9d
Reads like it's a bug in latest firmware. Anyone got confirmation from Moto of this?
I just read on Android Forums that this may be related to wifi router software being out of date. YMMV.
I just got my phone last week and it is my first Samsung. I love the phone. I decided to get serious with the S Health app and it is already driving me crazy.
There seems to be very little information on how to use or troubleshoot this app. This morning, it would not even recognize it was a new day and the pedometer would not kick in. Suddenly it did and started working. It seems like there should be a refresh button to tell the app, hey, it is a new day. Or, hey, it should just know by the clock that it is a new day. I even restarted my phone and then starting jumping around with it in my hand. Grrr.
Also, there is no way to record sleep. Is this function only available with the watch??
JDTS said:
I just got my phone last week and it is my first Samsung. I love the phone. I decided to get serious with the S Health app and it is already driving me crazy.
There seems to be very little information on how to use or troubleshoot this app. This morning, it would not even recognize it was a new day and the pedometer would not kick in. Suddenly it did and started working. It seems like there should be a refresh button to tell the app, hey, it is a new day. Or, hey, it should just know by the clock that it is a new day. I even restarted my phone and then starting jumping around with it in my hand. Grrr.
Also, there is no way to record sleep. Is this function only available with the watch??
Click to expand...
Click to collapse
You can only monitor the sleep with what they call a "wearable" a watch or device with the compatible sensor and that works with the phone.
Edit:
Also there was a large update last week I believe that removed some features, blended others, changed the settings and bugs etc based on your carrier model. Maybe check to see if yours is updated to clear out bugs. You could also clear the app manager data and cache to "start over" with the app and perhaps fix issues you're having.
Thank you for the info. The pedometer started working this morning pretty easily. I am also getting a gear fit watch today.
I am curious whether anyone else is having this problem as I cannot find anything about it online. I have an issue that my Pixel XL starts turning DND mode on and off repeatedly with no interaction from me. It cycles back and forth every second or so and the DND icon comes and goes from the notification bar as it does this. This also seems to run down the battery and heat up the phone. No clearing out of applications seems to fix this but if I reboot the phone it goes away. I should also note that I find my Pixel goes into DND mode all the time unintentionally . About half the time I take it out to make a call I see that DND is on. This happens even when it is not cycling like this repeatedly. Anyone else having problems like this?
Are they any DND rules setup that might be triggering? Do you have any other automation app installed, like Tasker, that could be causing thisre
I have seen this happen on my phone a few times - during the day, which is against the schedule that I set. It's not often enough to bother me, but it is somewhat worrisome.
These bugs man!
also experienced it. i wondered if it was impacted by android wear because i dont see it when i dont have my watch on.
i also noticed it goes into that DND mode when you make a call. so maybe it's not coming out of it when you hang up
DND is flaky
dr_gibberish said:
I am curious whether anyone else is having this problem as I cannot find anything about it online. I have an issue that my Pixel XL starts turning DND mode on and off repeatedly with no interaction from me. It cycles back and forth every second or so and the DND icon comes and goes from the notification bar as it does this. This also seems to run down the battery and heat up the phone. No clearing out of applications seems to fix this but if I reboot the phone it goes away. I should also note that I find my Pixel goes into DND mode all the time unintentionally . About half the time I take it out to make a call I see that DND is on. This happens even when it is not cycling like this repeatedly. Anyone else having problems like this?
Click to expand...
Click to collapse
I tried using DND when i first got the phone but it was inconsistent and flaky.
Went back to silence premium and havent had any issues since.
i have the same problem, but also using android wear.. very odd.
I also have a smartwatch connected. Perhaps the bug is related to Android Wear.
nabbed said:
I also have a smartwatch connected. Perhaps the bug is related to Android Wear.
Click to expand...
Click to collapse
So that's really interesting. I have a first gen Asus Zenwatch and I removed the Zenwatch Manager app late last week and the problem appears to have stopped. I still get the occasional DND turning on when I don't think I have activated it, but the cycling back and forth appears to have stopped. I should also note that I apparently got an upgrade to the watch firmware last week (it said upgrading when I woke up) so this could have resolved the issue as well. Regardless it does not seem to have happened in several days.
Android wear related I'm sure. When I go to hit volume down it says dnd- android wear
Sent from my Pixel XL using Tapatalk
Im using android wear and i am seeing the same problem.
Same here. Huawei watch.
Sent from my Pixel XL using XDA-Developers mobile app
Only notice it when on phone call. Zenwatch 2. But, currently my watch isn't paired with phone.
Happens with Samsung Gear Fit 2 as well.
Sent from my Pixel XL using XDA Labs
Here to add to the Android wear list, using an LG urbane.
Someone in another thread suggested deleting the three default automatic rules for do not disturb. I did that a couple days ago and haven't had the problem since. I have an Android Wear watch connected too.
Happens to me also, while connected to my Misfit Ray.
Hello all,
It seems i have a issue with my 6 month old Galaxy Watch 46mm, 1 week after the ONE UI update, all sensors (accelerometer, gyro and HR sensor) stopped working, only the ambient light sensor was working.
So i had no more step counter, turn your wrist to wake the screen (the one i missed the most), HR monitor, nothing.
After couple of restarts, 3 factory resets and waiting for 2 days, all sensors started working again.
Everything was fine for 1 week.
And now since 3 days ago the issue reappeared. no restarts, factory resets, hard restarts helped, till now.
What I noticed is if the Watch is powered OFF and charging the screen rotates accordingly, but if it is powered ON, the screen remains in the same position as it is on your hand, it does not turn 90 degrees.
So for me it seems to be a software/firmware bug.
Does anyone else have this issue?
How did you solve it?
Thanks
Hi,
i have similar problem on my GWA (SM-R500).
Now its four days and many restarts/Factory resets since my sensors died...
I was on Vacation/camping when my last HR reading history shows it happens while sleeping... I've noticed this next day when going for a walk and no notifications go to my watch (i've set to send notifications to watch only when wearing and not using phone). Then noticed that HR sensor is not blinking (set to always on). So i've tried to switch on manual and it starts measuring but in the end shows a "generic" error message (Can't read, try again) - no "dirty sensor" or similar messages... https://www.youtube.com/watch?v=9zo4pOisX_k
Now when i'm at home and searching for help and found this thread. So i've edited my Watchface to test other sensors (accelerometer, gyro) and they dont show any movement either...
I've tried even switch different options in the menus (like detecting workouts, sensors authorisations, etc) what i've found that helped others, but no avail...
According to Galaxy Wearable app i'm runing latest FW
OneUI v1.0
Tizen 4.0.0.3
FW R500XXU1BSD3
a new 15 MB update seems to be comming out,
Samsung’s changelog for the update read:
• Improved system reliability
• Disabled automatic sync of alarm from paired smartphone or watch
• Improved tracking for swim
maybe it will also make our sensors alive again ?
Question is when it will be out in EU
no clue, is it only for US? i am in Europe/Romania also
btw, my sensors started workin for 1 whole day, then went dead again, and now for the last 5 days, they are working 1 hour in 24 hours...which is kind of nice ?? just kidding
It looks like its update only for your (R800) type of watch... My R500 don't have any new update since April...
I'm thinking if there is some way to downgrade Samsung Health because last day it drain my battery in 22 hours, so i think problem is there...
BRazvy said:
a new 15 MB update seems to be comming out,
Samsung’s changelog for the update read:
• Improved system reliability
• Disabled automatic sync of alarm from paired smartphone or watch
• Improved tracking for swim
maybe it will also make our sensors alive again ?
Click to expand...
Click to collapse
Well, it really screwed up the floor count. There's another thread on this here but I normally don't get any counts. Today without climbing any floors at all, I have 173 floors.
I've tried Samsung's CZ Tech support and they responded, that this problem (at least my version) is really caused by last update of SHealth app, they know about it, but sadly there is no way to rollback to previous version, se we must only wait for new update
BRazvy said:
a new 15 MB update seems to be comming out,
Samsung’s changelog for the update read:
• Improved system reliability
• Disabled automatic sync of alarm from paired smartphone or watch
• Improved tracking for swim
maybe it will also make our sensors alive again
Click to expand...
Click to collapse
True that
---------- Post added at 12:45 PM ---------- Previous post was at 12:44 PM ----------
ententeak said:
It looks like its update only for your (R800) type of watch... My R500 don't have any new update since April...
I'm thinking if there is some way to downgrade Samsung Health because last day it drain my battery in 22 hours, so i think problem is there...
Click to expand...
Click to collapse
Yep, my friend has the same problem
whenever i reset my watch to factory settings, the latest samsung health version appears as an update, but i left it with the older version for days, and it still didn't help, are we talking about a much earlyer version?
BRazvy said:
whenever i reset my watch to factory settings, the latest samsung health version appears as an update, but i left it with the older version for days, and it still didn't help, are we talking about a much earlyer version?
Click to expand...
Click to collapse
Thats why i said "At least my version". I have different model (Galaxy Watch Active vs Galaxy Watch 46mm) than you, but similar error...
BTW: today i've wakeup with them "dead" - after 1 day and 10 hours in "battery saver mode" was battery drained from 100% to 0% mostly by SHealth app..
ententeak said:
I've tried Samsung's CZ Tech support and they responded, that this problem (at least my version) is really caused by last update of SHealth app, they know about it, but sadly there is no way to rollback to previous version, se we must only wait for new update
Click to expand...
Click to collapse
ententeak said:
Thats why i said "At least my version". I have different model (Galaxy Watch Active vs Galaxy Watch 46mm) than you, but similar error...
BTW: today i've wakeup with them "dead" - after 1 day and 10 hours in "battery saver mode" was battery drained from 100% to 0% mostly by SHealth app..
Click to expand...
Click to collapse
seems you will get the update also:
https://www.reddit.com/r/GalaxyWatch/comments/cgplgu/new_update_on_my_gwa/
Sadly not yet available in CZ
ententeak said:
Sadly not yet available in CZ
Click to expand...
Click to collapse
got the update 2 days ago, installed it,but nothing changed...
but about 1 week ago, i deleted the Alti-Barometer widget and then uninstalled the Alti-Barometer App thatcomes from the factory, and after several restarts everything started working, except for the floor count, which i can leave without, other sensors still working after 1 week, without any issues
also tested this again after the SW Update from 2 days ago, watch reset, tried to configure Alti Barometer app, sensors crashed, deleted Alti-Barometer app, 5 restarts plus several shutdowns later, everything started working again
so i am 99% happy now, maybe this post will help others
P.S. also with latest Samsung Health App installed, everything besides floor count works fine.
Good to know & glad it's sorted! Cheers
i "forced" that update with changing CSC code from XEZ (CZ) to XAR (US) and get the Tizen 4.0.0.5 update and no luck either... (Changing XAR to XEZ was a little pain in the ass because they use different WiFi bands so i've needed to reconfigure my router to be able to connect to sdb)
and GWA don't have Alti-barometer preinstalled, so i've tried to install it, calibrate (via GPS), tried to measure pressure (no data), tried few restarts with no luck... Now, when Alti-Bar uninstalled, i'm trying more restarts without change...
The sensors are dead even in the service menu (*#0*#)
(BTW: i've got since my last reply 2 days working, one day not and then 5 days in a row when it worked. Then dead again, so i've tried that CSC-updated method...)
Hi all.
I bought a Galaxy Watch 46mm in April 2019 and updated recently :
SM-R800
One UI 1.0
Tizen 4.0.0.4
R800XXU1CSE1
For my part I have the following problem: the number of floors climbed is completely wrong for several weeks now. I do not know if it's from the One UI 1.0 version but when i bought it it worked fine.
So according to you it comes from Samsung Health and not the OS, firmware?
Have you tried to go back on updating the watch by trying to flash it with a previous version?
My watch is still under warranty samsung.
It was sent for repair and they changed the brightness sensor which of course did not change anything !
Attached a screenshot of my watch : you can see 72 floors climbed on the 05/08/2019...
Thank you for your feedback.
I have the sensor issues (HR, lift-to-wake, step count, et al) for almost two months now. countless reboots didn't fix my problem. I then read somewhere that completely switching off the watch, or turning it to 'watch only' mode for 2-3 days fixes the problem. I did just that and voila! Everything works fine. UNTIL, I went to the gym and recorded my workout. I stopped recording my workout and all sensors died again. Followed the process once again, made sure not to record my workout again but it auto detected it this time and died again. I'll turn on my watch again over the weekend to see if the issue auto-fixes again, but I think I have identified atleast one thing that causes this incredibly annoying issue!
EDIT: I've read a lot of people (both on this thread and otherwise) mentioning how the Health app is the culprit. Does anybody have an apk of a previous version to test out this theory?
I give a shot to the "Watch-only mode"... and after few minutes in that mode, turned back on and its working
Edit: it was working for almost same time as it was turned off :/
BTW: I was asking at Samsung's support if there is some way how to rollback (at least like on any android phone - uninstall all updates for default apps) and she say there is no other way than "Factory settings"
If u uninstall Alti Barometer app all works except floor counts. But if u live in building on 4th floor when u go to the apartment gyro sensors goes off and stop working. The same situation is when u go down from 4th floor. Then u must restart GW (on ground or apartment) to start sensors working. Frustrated.
Almost every Samsung android phone I've own has this problem after using it for a period of time. I've had the note 10+ since launch and the dreaded issue has return.
For some apps, I would tap the notification for the app. It would take a few minutes before the app will open.
Anyone has this issue?
I've had it on my note8, Note9 and now the note10+.
Hard reset will fix it but I don't want to reset and start again..
Continuation from note 8 thread: https://forum.xda-developers.com/galaxy-note-8/help/app-lag-clicking-notification-t3781356/page2
I don't have this issue.
Some people prefer to perform an hard reset as soon as they got the phone, before starting using it for the first time ; maybe they had some issues like yours at first, then wanted to avoid them.
Personally I didn't got any at first run.
That's odd, I have not experienced what you say in any of my samsung devices dating from my beloved S3 to this note10+
Yes..i am so confuse why it happens.. When the phone is new or just had a hard reset.. I don't have the issue.. Over time I always get it.
I also have this issue and it's incredibly annoying. Apps will take a full minute to open after being tapped on from the notifications banner. I too have had all but one Note product since the original (skipped the 2nd gen), but this is the first I can recall this issue happening. I'm also experiencing the issue of Google Play store apps getting stuck at 99% or 100% and not installing for 10 minutes or longer.
Is it all apps or certain apps only? Are you running stock or rooted? Exynos or Snapdragon? I haven't seen this issue shown up in a while, but have had it happen on Android devices in general in the past.
aarick said:
Almost every Samsung android phone I've own has this problem after using it for a period of time. I've had the note 10+ since launch and the dreaded issue has return.
For some apps, I would tap the notification for the app. It would take a few minutes before the app will open.
Anyone has this issue?
I've had it on my note8, Note9 and now the note10+.
Hard reset will fix it but I don't want to reset and start again..
Continuation from note 8 thread: https://forum.xda-developers.com/galaxy-note-8/help/app-lag-clicking-notification-t3781356/page2
Click to expand...
Click to collapse
Aaron J said:
I also have this issue and it's incredibly annoying. Apps will take a full minute to open after being tapped on from the notifications banner. I too have had all but one Note product since the original (skipped the 2nd gen), but this is the first I can recall this issue happening. I'm also experiencing the issue of Google Play store apps getting stuck at 99% or 100% and not installing for 10 minutes or longer.
Click to expand...
Click to collapse
I don't have this issue, but as @dhorgas, more info would be helpful if it's a problem that can easily be fixed.
Two have the issue here, It could be a common app both of you are running.
lennie said:
I don't have this issue, but as @dhorgas, more info would be helpful if it's a problem that can easily be fixed.
Two have the issue here, It could be a common app both of you are running.
Click to expand...
Click to collapse
It seems to be related to pendingIntent type notifications as if I tap a notifications that is a collapsed version of all the notifications, the app will load instantly. Have a look at this video I created:
(I didn’t include the tap showing on screen unfortunately, will attempt to do another video next time)
Initial tap was when the notification is collapsed for reolink and that will just open up the app. Happens instantly.
I close the app, expanded the notification and click on specific notification
The app doesn’t open until 8 minutes + later towards the end of the video.
Issue is happening across a fair few apps so I doubt it's common app..
I also have the issue of delayed notifications as discussed here:
https://eu.community.samsung.com/t5...ue-affecting-all-range-of-Samsung/td-p/738070
dhorgas said:
Is it all apps or certain apps only? Are you running stock or rooted? Exynos or Snapdragon? I haven't seen this issue shown up in a while, but have had it happen on Android devices in general in the past.
Click to expand...
Click to collapse
Stock on exynos
Aaron J said:
I also have this issue and it's incredibly annoying. Apps will take a full minute to open after being tapped on from the notifications banner. I too have had all but one Note product since the original (skipped the 2nd gen), but this is the first I can recall this issue happening. I'm also experiencing the issue of Google Play store apps getting stuck at 99% or 100% and not installing for 10 minutes or longer.
Click to expand...
Click to collapse
Have the same issue with the play store. One way to speed it up is to force close play store... Then reopen it..
The app will redownload and should install this time.. Not always..
Quick update: Got fed up and did a factory reset and restored everything. Everything's working fine now. Obviously that's a last resort, but so far it's the only solution I've seen.
aarick said:
It seems to be related to pendingIntent type notifications as if I tap a notifications that is a collapsed version of all the notifications, the app will load instantly. Have a look at this video I created:
(I didn’t include the tap showing on screen unfortunately, will attempt to do another video next time)
Initial tap was when the notification is collapsed for reolink and that will just open up the app. Happens instantly.
I close the app, expanded the notification and click on specific notification
The app doesn’t open until 8 minutes + later towards the end of the video.
Issue is happening across a fair few apps so I doubt it's common app..
I also have the issue of delayed notifications as discussed here:
https://eu.community.samsung.com/t5...ue-affecting-all-range-of-Samsung/td-p/738070
Click to expand...
Click to collapse
Wow. That would drive me crazy. Try backup, hard reset and restore like @Aaron J did and see if that fixes the issue.
lennie said:
Wow. That would drive me crazy. Try backup, hard reset and restore like @Aaron J did and see if that fixes the issue.
Click to expand...
Click to collapse
Yes.. It will fix it.. But it's temporary..
The issue won't happen straight away.. It takes a few weeks/months and will return.. It has happened to me from the note 8, note 9 and now note 10+.
Initially everything will be good and fast.. Then eventually issue will return..
So need to try to get to the root of it..
Aaron J said:
Quick update: Got fed up and did a factory reset and restored everything. Everything's working fine now. Obviously that's a last resort, but so far it's the only solution I've seen.
Click to expand...
Click to collapse
Hope the issue doesn't return for you.. It always returns for me..
I have been dealing with 3 issues in my phone:
-delayed notifications
-slow app opening when tapping notifications
-apps installation through play store delayed after download
So recent development, I have been following this thread on Samsung forums regarding delayed notifications
https://eu.community.samsung.com/t5...ting-all-range-of-Samsung/td-p/738070/page/28
Have tried all the fixes which has given minor relief..
But the last suggestion to disable dynamic lock on windows 10 seems to have fixed the issue for me. Early days but all 3 issues have not reoccured yet today.. Usually my Samsung reminders will not show until I reboot. But today been good so far.
Apps install instantly and apps open from notifications straight away..
Will report back in a few days if anything changes..
aarick said:
I have been dealing with 3 issues in my phone:
-delayed notifications
-slow app opening when tapping notifications
-apps installation through play store delayed after download
So recent development, I have been following this thread on Samsung forums regarding delayed notifications
https://eu.community.samsung.com/t5...ting-all-range-of-Samsung/td-p/738070/page/28
Have tried all the fixes which has given minor relief..
But the last suggestion to disable dynamic lock on windows 10 seems to have fixed the issue for me. Early days but all 3 issues have not reoccured yet today.. Usually my Samsung reminders will not show until I reboot. But today been good so far.
Apps install instantly and apps open from notifications straight away..
Will report back in a few days if anything changes..
Click to expand...
Click to collapse
So ... did this do it? I've been dealing with this for a LONG time. My Note 8 started this crap after the 9 'upgrade', motivated me to get a new Note 10. A few months later, the SAME exact problem is cropping up.
Slow notification reactions, stuck installs, notifications coming in repeatedly, notifications coming in late all at once.
If this isn't resolved soon, my next phone will definitely not be a Samsung.
nokster said:
So ... did this do it? I've been dealing with this for a LONG time. My Note 8 started this crap after the 9 'upgrade', motivated me to get a new Note 10. A few months later, the SAME exact problem is cropping up.
Slow notification reactions, stuck installs, notifications coming in repeatedly, notifications coming in late all at once.
If this isn't resolved soon, my next phone will definitely not be a Samsung.
Click to expand...
Click to collapse
Yes, my issue is gone now. Try removing windows dynamic lock and unpair your phone from your laptop if you have this setup.
If not, try slowly removing other Bluetooth devices.
For me, a Bluetooth yeelock also caused the delay to return..I have to reboot each time after using the lock to get it back to normal.
I also think a plantronics desktop headset was also causing the issue as I was getting the lag everytime I reach home since removing windows dynamic lock. I have since unplugged it and unpaired. So far been good for a few weeks now.
I heard this issue wasn't specific to Samsung but might be an Android issue..i think it started with Android 9.0 as you have mentioned as I never had this issue when I was using the note 8 before one ui.. But note 9 and 10+ both had issues..
Similar issue mentioned on pixel phone support:
https://support.google.com/pixelphone/thread/5024453?hl=en
aarick said:
Yes, my issue is gone now. Try removing windows dynamic lock and unpair your phone from your laptop if you have this setup.
If not, try slowly removing other Bluetooth devices.
For me, a Bluetooth yeelock also caused the delay to return..I have to reboot each time after using the lock to get it back to normal.
I also think a plantronics desktop headset was also causing the issue as I was getting the lag everytime I reach home since removing windows dynamic lock. I have since unplugged it and unpaired. So far been good for a few weeks now.
I heard this issue wasn't specific to Samsung but might be an Android issue..i think it started with Android 9.0 as you have mentioned as I never had this issue when I was using the note 8 before one ui.. But note 9 and 10+ both had issues..
Similar issue mentioned on pixel phone support:
https://support.google.com/pixelphone/thread/5024453?hl=en
Click to expand...
Click to collapse
I don't have Dynamic Lock set up, nor do any of my computers have bluetooth enabled. BUT I do have this cursed Plantronics PLT W8200 series headset that has been nothing but buggy since I got it. Not surprised if this is the cause. I just unpaired it - fingers crossed.
I hope that's it because otherwise, it's just 2 other pretty crucial devices I have paired.
nokster said:
I don't have Dynamic Lock set up, nor do any of my computers have bluetooth enabled. BUT I do have this cursed Plantronics PLT W8200 series headset that has been nothing but buggy since I got it. Not surprised if this is the cause. I just unpaired it - fingers crossed.
I hope that's it because otherwise, it's just 2 other pretty crucial devices I have paired.
Click to expand...
Click to collapse
Would be good to hear if this fixes your issue. Please make sure you reboot after unpairing too and if possible completely unplug the plantronics as I think it might try to connect to your phone still (but fail) and potentially still bring the issue back as my yeelock doesn't even show up as a paired device, the app just sends msg to it via bluetooth and I still have delays after using it.
Keep us updated...
aarick said:
Would be good to hear if this fixes your issue. Please make sure you reboot after unpairing too and if possible completely unplug the plantronics as I think it might try to connect to your phone still (but fail) and potentially still bring the issue back as my yeelock doesn't even show up as a paired device, the app just sends msg to it via bluetooth and I still have delays after using it.
Keep us updated...
Click to expand...
Click to collapse
So after the weekend of having the Plantronics headset un-paired, it *seems* better. Hopefully it stays that way.