The last post i write a EdXposed module to enable Soli.
Now I'm write a Magisk module to enable Soli without restart zygote,and reboot the device will keep Soli to enabled.
Please go to github and download this module ,the url is https://github.com/demj1206170/EnableSoli
and feedback if there have any issues.
I download the file and flashed by Magsik i got failed " This zip in not a Magsik Module
I am new in root+Magsik game
Pixel4XL - Oct
DinarQ8 said:
I download the file and flashed by Magsik i got failed " This zip in not a Magsik Module
I am new in root+Magsik game
Pixel4XL - Oct
Click to expand...
Click to collapse
If the error states that it's not a Magisk zip, or invalid zip in TWRP, the zip is not packaged correctly. Open up the zip and you'll likely see a folder (probably named something like <nameofmodule>-master or similar, or something completely different). Take all the contents of that folder and repack it to the root of the zip and try flashing it again.
dengxm said:
If the error states that it's not a Magisk zip, or invalid zip in TWRP, the zip is not packaged correctly. Open up the zip and you'll likely see a folder (probably named something like <nameofmodule>-master or similar, or something completely different). Take all the contents of that folder and repack it to the root of the zip and try flashing it again.
Click to expand...
Click to collapse
Thank you so much work great [emoji1360]
Sent from my Pixel 4 XL using Tapatalk
DinarQ8 said:
I download the file and flashed by Magsik i got failed " This zip in not a Magsik Module
I am new in root+Magsik game
Pixel4XL - Oct
Click to expand...
Click to collapse
i download the release file and flush it, no issue occured. Did you download this file from release page?
fortunedemj said:
i download the release file and flush it, no issue occured. Did you download this file from release page?
Click to expand...
Click to collapse
Just now i see i downloaded wrong file something name clone file this file not flashing. After edit the file i see there a original file on the site flashing without any issues [emoji4]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my Pixel 4 XL using Tapatalk
Works great! I had to repackage the zip contents into a new zip folder but after that, no problem with the Magisk flashing. Thanks for the effort
i try to enable by this models
but nothing
i had edxpose models and disabled it and try to insall the magisk models and after flashing and reboot didnt work
do i need to uinstall the xdpose app and models and riru core and riru edxpsosed
thanks
or maby i clone wrong the files
hello, i repackaged the zip file but it is still saying that it is not a magisk module. Is there a specific program for repackaging or am i missing something?
Not working for me.
It's installed with no problem, but when I reboot, the Motion Sense is still disabled.
By the way, the following command still works.
Code:
setprop pixel.oslo.allowed_override true
setprop persist.pixel.oslo.allowed_override true
setprop ctl.restart zygote
dotcink said:
Not working for me.
It's installed with no problem, but when I reboot, the Motion Sense is still disabled.
By the way, the following command still works.
Code:
setprop pixel.oslo.allowed_override true
setprop persist.pixel.oslo.allowed_override true
setprop ctl.restart zygote
Click to expand...
Click to collapse
U can do this with magisk Hide props conf.
U should install this module, then install terminal, type :
Su
Props
Add new props (u should choose it from the list)
Add only this: pixel.oslo.allowed_override true
Reboot / profit
lapapunk said:
U can do this with magisk Hide props conf.
U should install this module, than install terminal, type :
Su
Props
Add new props (u should choose it from the list)
Add only this: pixel.oslo.allowed_override true
Reboot / profit
Click to expand...
Click to collapse
It works, thank you!:good:
lapapunk said:
U can do this with magisk Hide props conf.
U should install this module, then install terminal, type :
Su
Props
Add new props (u should choose it from the list)
Add only this: pixel.oslo.allowed_override true
Reboot / profit
Click to expand...
Click to collapse
This works perfectly fine and it's clean cut. Thanks.
ozikat12 said:
This works perfectly fine and it's clean cut. Thanks.
Click to expand...
Click to collapse
what magisk module should we use ??
nexusTHIRTEEN said:
what magisk module should we use ??
Click to expand...
Click to collapse
I've screen shot the required modules. Install Terminal apps and run the set prop command mentioned above thread.
ozikat12 said:
I've screen shot the required modules. Install Terminal apps and run the set prop command mentioned above thread.
Click to expand...
Click to collapse
EdXposed always bootloops my device !
nexusTHIRTEEN said:
EdXposed always bootloops my device !
Click to expand...
Click to collapse
Install only props and busybox modules! Its all that u need for soli
lapapunk said:
Install only props and busybox modules! Its all that u need for soli
Click to expand...
Click to collapse
Hi, I installed busybox and magiskhide props config but after that can you please provide a step by step description of what's next? I want to know where I went wrong. Thanks.
DinarQ8 said:
Thank you so much work great [emoji1360]
Sent from my Pixel 4 XL using Tapatalk
Click to expand...
Click to collapse
Hi, I also got failed " This zip in not a Magsik Module." Can you explain how exactly you bypassed this?
onlyguynamedniles said:
Hi, I also got failed " This zip in not a Magsik Module." Can you explain how exactly you bypassed this?
Click to expand...
Click to collapse
This the correct file. But not work with Security Feb
Install v 1.1 from Edxposed
Sent from my Pixel 4 XL using Tapatalk
View attachment 4942519
Related
For D802 Only
I have modified One Root Script ROOT KitKat / Lollipop firmware that for One Click ROOT+TWRP D802 Support firmware 30a/30d.
It can be use in other firmware version of D802
Download Link:
LGG2-D802-OneClickRootRecoveryV1.1.zip
http://bit.ly/1Ij1soU
If you like my work, want to support development and have few coins spare .You can Press button DONATE TO ME
How to install
Backup Data on SDCARD Before doing everything
AFTER SCRIPT FINISHED IT WILL BE REBOOT TO RECOVERY AUTOMATICLY
1. Make sure you are enable USB Debuging Mode . See this Method > Enable Debugging Mode
2. Plug G2 into computer
3. Run OneClick_ROOT_RECOVERY.bat
4. Enjoy ROOT+TWRP on Lollipop Firmware
Normally If doesn't work for people please checking port that connecting between device and computer or checking LG driver and Re-run script again or use Manual method
What does the automate script do ?
(For people can't use automate script we have to use manually ROOT+TWRP)
Make sure you are enable USB Debuging Mode . See this Method > Enable Debugging Mode
1. Pushing all stuff files
Run file
Command Prompt.bat
Click to expand...
Click to collapse
It will be show command DOS windows
C:\Users\M\Desktop\cc\LG Root Script\LGG2-D80230a-OneClickRootRecovery>
Click to expand...
Click to collapse
Using command as below to push files to device
adb.exe push busybox /data/local/tmp/ && adb.exe push lg_root.sh /data/local/tmp/ && adb.exe push UPDATE-SuperSU-v2.46.zip /data/local/tmp/
adb.exe push aboot.img /data/local/tmp/aboot.img
adb.exe push laf.img /data/local/tmp/laf.img
adb.exe push boot.img /data/local/tmp/boot.img
adb.exe push recovery.img /data/local/tmp/recovery.img
Click to expand...
Click to collapse
2. Reboot to Download mode
3. When enter to Download mode successfully.We need to send command to connect device with computer
Send_Command.exe \\.\COM_PATH
Click to expand...
Click to collapse
COM_PATH . we can find with ports.bat command
Ex.
C:\Users\M\Desktop\cc\LG Root Script\LGG2-D80230a-OneClickRootRecovery>ports.bat
C:\Users\M\Desktop\cc\LG Root Script\LGG2-D80230a-OneClickRootRecovery>reg query HKLM\hardware\devicemap\SERIALCOMM
HKEY_LOCAL_MACHINE\hardware\devicemap\SERIALCOMM
\Device\LGANDNETMDM0 REG_SZ COM3
\Device\LGANDNETDIAG1 REG_SZ COM4
Click to expand...
Click to collapse
A command that send to device when connecting to computer with Download Mode is
C:\Users\M\Desktop\cc\LG Root Script\LGG2-D80230a-OneClickRootRecovery>Send_Command.exe \\.\COM4
Click to expand...
Click to collapse
4. When we see this prompt
C:\Users\M\Desktop\cc\LG Root Script\LGG2-D80230a-OneClickRootRecovery>Send_Command.exe \\.\COM4
Author : blog.lvu.kr
SPECIAL COMMAND : ENTER, LEAVE
#
Click to expand...
Click to collapse
Try to use this command to ROOT+TWRP
# sh /data/local/tmp/lg_root.sh dummy 1 /data/local/tmp/UPDATE-SuperSU-v2.46.zip /data/local/tmp/busybox
Click to expand...
Click to collapse
5. When we see this message
ui_print - Disabling OTA survival
ui_print - Removing old files
ui_print - Placing files
ui_print - Post-installation script
ui_print - Unmounting /system and /data
ui_print - Done !
Please press Ctrl+C, and then type N and ENTER to reboot.
#
Click to expand...
Click to collapse
Try to use LEAVE command to restart device.
#LEAVE
Click to expand...
Click to collapse
6. Enjoy ROOT+TWRP
ขอบคุณครับ
For. any question that want to ask me in private Please Leave a question in facebook group
https://www.facebook.com/groups/1420724551528661/
......... DON'T INBOX TO ME .........
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Original Script
[Guide] Root LG firmwares (KitKat / Lollipop) - One click script by @avicohh
Ok
Tested on 32g Spain Vodafone 30d Rom and works like a charm, thanks
Led Zeppelin said:
Tested on 32g Spain Vodafone 30d Rom and works like a charm, thanks
Click to expand...
Click to collapse
I will be update my script for One Click ROO+TWRP.
That would be awesome
would be awesome!!
somboons said:
I will be update my script for One Click ROO+TWRP.
Click to expand...
Click to collapse
waiting just for that.. thanks :fingers-crossed::highfive::victory:
OMERZEN said:
waiting just for that.. thanks :fingers-crossed::highfive::victory:
Click to expand...
Click to collapse
Link online.
Feedback to me.
What khappens now to ur flashable rooted v30a and v30d
legola said:
What khappens now to ur flashable rooted v30a and v30d
Click to expand...
Click to collapse
Bump stock kernel is different .I want to people use compatible kernel.
somboons said:
Feedback to me.
Click to expand...
Click to collapse
This downgrade laf and aboot to v20?
4Freedom said:
This downgrade laf and aboot to v20?
Click to expand...
Click to collapse
this is a concept.
Great job man! Root & Recovery on Lollipop with LG G2 D802 is easy to do now!
somboons said:
this is a concept.
Click to expand...
Click to collapse
Okay, so now we have kitkat bootloader and kitkat "downlaod mode" on lollipop.
Between, about recovery, MUST we use only bumped version?
And every rom is compatible now?
4Freedom said:
Okay, so now we have kitkat bootloader and kitkat "downlaod mode" on lollipop.
Between, about recovery, MUST we use only bumped version?
And every rom is compatible now?
Click to expand...
Click to collapse
I answered you on all this points: http://forum.xda-developers.com/showpost.php?p=59882657&postcount=2
again: kk bootloader=> only bumped recovery/kernel
only rom with bumped kernel work on KK bootloader
6ril1 said:
only rom with bumped kernel work on KK bootloader
Click to expand...
Click to collapse
How can i understand if a rom has a bumped kernel?
Like official cm12?
And thanks for everything
i have a problem it say Couldn't open the port \\:\ COM3 after the phone enter in download mode
remio33 said:
i have a problem it say Couldn't open the port \\:\ COM3 after the phone enter in download mode
Click to expand...
Click to collapse
Screen shot please
I'm stuck at :
special command : ENTER , LEAVE
#
I did the root script once ,but wanted recovery ... maybe the other root script from avicohh is interfering ?
How to uninstall the supersu completely ,because it worked with the avicohh script, but i wanted recovery too so trying to install your script now ?
Kuoi said:
I'm stuck at :
special command : ENTER , LEAVE
#
I did the root script once ,but wanted recovery ... maybe the other root script from avicohh is interfering ?
How to uninstall the supersu completely ,because it worked with the avicohh script, but i wanted recovery too so trying to install your script now ?
Click to expand...
Click to collapse
Can you copy of log that show on command dos to me?
This script working very well for me.
somboons said:
Can you copy of log that show on command dos to me?
This script working very well for me.
Click to expand...
Click to collapse
Trying the avihocc script now ,but as expected ... same , stuck on #
I think the first install of supersu with avihocc script interfered with yours , so now i think i have to do the installation of the rom again to test if it was
Hi All,
As with my previous devices I've always looked out for the useless but still cool, screen off animation (remember the CRT animation on the old phones? ) as it has not yet been created for our device our only other option is to use Xposed.
Thanks to @zst123 for creating the Xposed module.
Cheers :good:
I've tested this to work with LeeDroid, however it should work on any other ROM running android 6.0.XXX
Requirements
Root Access
A device running Android 6.0.XXX Marshmallow
A custom recovery (TWRP)
1. Go here and download this http://forum.xda-developers.com/attachment.php?attachmentid=3383776&d=1435601440
This is the alpha apk
2. Go here and download this http://dl-xda.xposed.info/framework/sdk23/arm64/xposed-v81-sdk23-arm64.zip
This is the framework
3. Go here and download this http://dl-xda.xposed.info/framework/uninstaller/xposed-uninstaller-20150831-arm64.zip
This is the Xposed uninstaller just in case you want to remove it.
You now have everything you'll need for now
4. Install the Alpha APK and reboot to recovery.
5. Once in recovery, flash the Xposed Framework, once installed, reboot system, this may take a while, a few minutes is not uncommon.
Once back in the android system, you'll find that it indexes all your apps, this is normal, allow it to finish.
6. Open the Xposed Alpha app and click download.
7. Search for and download the ScreenOffAnimation module and enable it under modules within the Xposed app.
8. Reboot your device.
9. Open the ScreenOffAnimation app and enable an animation. Reboot, again this may take a few minutes although it should be quicker than the framework reboot, no application indexing should take place.
10. Done and Enjoy
You will need to reboot to fully implement any new changes to this app, it also hasn't been updated for a while so the current version is v1.3, however it is functional and should work as expected.
You might be able to squeeze this whole process with maybe a few less reboots, however this is how I first did it and how it worked for me so it should (if you follow to the letter) work for you
At the time of writing the versions used are as follows.
Alpha APK v3.0alpha4
Framework v80sdk23 for ARM64 devices.
ScreenOffAnimation v 1.3
Any questions, please ask and I'll do what I can to assist.
why do you link to an old xposed framework v84 is available since May 4 or 5
JEANRIVERA said:
why do you link to an old xposed framework v84 is available since May 4 or 5
Click to expand...
Click to collapse
Didn't know mate [emoji6] I know it works. Haven't tried the newer one yet. Is there actually a difference?
I know the affects on your phone is minimal with this version, will get around to trying it, also I've copied this from my old thread on the 6P so will get around to updating it when I can.
I'm getting an "Unfortunately, Xposed Installer has stopped" error :/
I renamed the XposedInstaller_3.0_alpha4.zip to XposedInstaller_3.0_alpha4.apk, and installed it the normal way.
I'm using Xposed framework v84 (intalled by using TWRP)
htc-hd2 said:
I'm getting an "Unfortunately, Xposed Installer has stopped" error :/
I renamed the XposedInstaller_3.0_alpha4.zip to XposedInstaller_3.0_alpha4.apk, and installed it the normal way.
I'm using Xposed framework v84 (intalled by using TWRP)
Click to expand...
Click to collapse
Hi HTC, I personally haven't installed v84 as of yet so I can't comment on its functionality. Once I have I'll comment here however why are you renaming the file? It shouldn't make a difference. AFAIK anyway.
Yea this doesn't work. At least with 84. I try to click on preview animation but does nothing.
Ndaoud360 said:
Yea this doesn't work. At least with 84. I try to click on preview animation but does nothing.
Click to expand...
Click to collapse
And have you rebooted?
dladz said:
And have you rebooted?
Click to expand...
Click to collapse
Yes
Edit: rebooted a second time and it worked
Ndaoud360 said:
Yes
Edit: rebooted a second time and it worked
Click to expand...
Click to collapse
Yea you need to reboot after alterations. After the first it should take without.. I just installed it with the version I said to download and it still functions, can you clarify that it works with 84?
I'll continue with version 80 for the time being and see if the battery is affected any more than it was on my Nexus 6P which was extremely minimal.
I've also noticed that android pay opens as expected.
I'm currently using LD with systemless root.
Update, with v 80, no excessive drain at all, I'm on exactly what I was on prior to installing it, will test overnight. I'm guessing 2% overnight.
htc-hd2 said:
I'm getting an "Unfortunately, Xposed Installer has stopped" error :/
I renamed the XposedInstaller_3.0_alpha4.zip to XposedInstaller_3.0_alpha4.apk, and installed it the normal way.
I'm using Xposed framework v84 (intalled by using TWRP)
Click to expand...
Click to collapse
Haha htc I only just realised, youve renamed a zip to an apk? That's not going to install mate, Im guessing youve got a zip which will be the framework, that needs to be installed in recovery, then install the alpha build via the phone using a file manager.
Or just follow my guide.
All 3 files are (when I download them) .zip files.
The "the alpha apk" (XposedInstaller_3.0_alpha4.zip) will not (as you suggest in point 4) install as .zip file!
The Xposed Framework has been installed/flashed (as suggested in point 5) by using recovery.
htc-hd2 said:
All 3 files are (when I download them) .zip files.
The "the alpha apk" (XposedInstaller_3.0_alpha4.zip) will not (as you suggest in point 4) install as .zip file!
The Xposed Framework has been installed/flashed (as suggested in point 5) by using recovery.
Click to expand...
Click to collapse
Wrong. The first file you download is the APK. Not a zip.
1. Go here and download this http://forum.xda-developers.com/attachment.php?attachmentid=3383776&d=1435601440
This is the alpha apk
Why did you think this was a zip file?
I just downloaded it from the OP and it's an apk, so not sure what you're talking about mate.
When I download the file its offered as .zip (maybe a Windows 10 / IE11 problem?)
---------- Post added at 04:23 PM ---------- Previous post was at 04:15 PM ----------
Proof
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
htc-hd2 said:
When I download the file its offered as .zip (maybe a Windows 10 / IE11 problem?)
---------- Post added at 04:23 PM ---------- Previous post was at 04:15 PM ----------
Proof
Click to expand...
Click to collapse
Download it from your phone mate..
To be honest, always download from the source of the device if it can be installed from that device. In this case a PC is not needed.. I imagine that if I downloaded this from my PC it would also be an apk.. Not sure why you're getting a zip.
If you open the zip on your pc what's inside it?
I have several phones here. So downloading to pc is easier for me to install it to the other phones.
Inside the zip file I see the apk layout. Ie. Assets, META- INF, res, androidManifest.xml. Basicly an .apk file.
That's why I renamed the zip to .apk
Problem for me is not installing the file. Problem is that it crashes when running it.
Anyway... I'm going to install a custom rom later this week, so problem will be solved.
htc-hd2 said:
I have several phones here. So downloading to pc is easier for me to install it to the other phones.
Inside the zip file I see the apk layout. Ie. Assets, META- INF, res, androidManifest.xml. Basicly an .apk file.
That's why I renamed the zip to .apk
Problem for me is not installing the file. Problem is that it crashes when running it.
Anyway... I'm going to install a custom rom later this week, so problem will be solved.
Click to expand...
Click to collapse
That is not the APK mate. You've downloaded the wrong file..
Sorry I'm not sure how many different ways i can say it. The original file I posted is an apk.
And I do not know how many different ways I can say this, but they all download as a zip file for me in IE.
That's it. I'm out of here..
1. Install AML and ViperFX
2. Reboot.
3. Launch Viper and install the driver.
4. Without running Viper:
- From the archive AML.rar
replace post-fs-data.sh along the path /data/adb/modules/AML
- From the archive Viper.rar
replace post-fs-data.sh along the path /data/adb/modules/VIPER4AndroidFX
5. Reboot.
6. Done.
Note.
1) My PowerAmp does not work correctly.
2) If there is a clock offset in the status bar then install the module selinux_enforce.zip
Spoiler: Screenshot
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[email protected] said:
1. Install AML and ViperFX
2. Reboot.
3. Launch Viper and install the driver.
4. Without running Viper:
- From the archive AML.rar
replace post-fs-data.sh along the path /data/adb/modules/AML
- From the archive Viper.rar
replace post-fs-data.sh along the path /data/adb/modules/VIPER4AndroidFX
5. Reboot.
6. Done.
Note.
1) My PowerAmp does not work correctly.
2) If there is a clock offset in the status bar then install the module selinux_enforce.zip
Spoiler: Screenshot
View attachment 5544989View attachment 5544991
Click to expand...
Click to collapse
Thanks. Can't extract your .rar files, seem corrupted
Bepi Mosto said:
corrupted
Click to expand...
Click to collapse
reload
Finally working in OOS12 thanks!
P.S for some reason the folder directories to copy the files were:
data/adb/modules/aml
and
data/adb/modules/ViPER4AndroidFX
Figured it out when getting directory does not exit when trying the paths given in first post
TY for this. I had it working 100% on Android 11, but figured I was lost on 12. Only issue I've had is it constantly thinks I'm connected to my car radio's BT after I disconnect, so profiles aren't perfect, but I missed V4Android. Sound quality is night vs day.
Hi there,
after several other methods this one helped me to solve the driver problem. Thanks for that!
Still I have the problem that NEON is not activated. Is there any solution to be found anywhere?
I am using the Oneplus Nord 2T with Oxygen OS Android 12.
EDIT: found solution.
This worked fine for me on OOS13, it works in all apps when the legacy mode is on. However after doing this whole procedure, Dolby Atmos no longer works (at least on the integrated speakers, which is what I only tested)
Didn't work. After replacing files Viper driver is installed loop (OnePlus 10 Pro, OOS 13, C20 (EU))
Arcide said:
This worked fine for me on OOS13, it works in all apps when the legacy mode is on. However after doing this whole procedure, Dolby Atmos no longer works (at least on the integrated speakers, which is what I only tested)
Click to expand...
Click to collapse
Did anyone else have this issue and any clue on how to solve it?
Hey guy i installed viper works but when i try to use the Convolver and than i click on impulse response. I get this message on the bottom. Anyway to fix this.
The presets install into a different folder. You have to manually move them over to where Viper is telling you it can't find them. Oddly enough, I had to use Terminal to move them. Even Root Explorer with SU permissions got a r/w denial.
MStrawder said:
The presets install into a different folder. You have to manually move them over to where Viper is telling you it can't find them. Oddly enough, I had to use Terminal to move them. Even Root Explorer with SU permissions got a r/w denial.
Click to expand...
Click to collapse
i Wnet into the folder and i have everytinh there took a screen shot of it.
Am i doing something wrong
I believe its a weird permissions error. There's a guide to getting these to work in the main Viper4Android thread here on XDA.
MStrawder said:
I believe its a weird permissions error. There's a guide to getting these to work in the main Viper4Android thread here on XDA.
Click to expand...
Click to collapse
Would you be able to link to that fix please.
Also i removed viper and verytime it asks me to install drivers and i do and when i reboot start viper it asks me to do it again. Sorry a little frustrated
Viper4Android That's the thread. Its towards the end. As far as troubleshooting, I can only recommend removing all of the modules and starting from scratch. The steps at the top of this thread worked perfectly for me.
MStrawder said:
Viper4Android That's the thread. Its towards the end. As far as troubleshooting, I can only recommend removing all of the modules and starting from scratch. The steps at the top of this thread worked perfectly for me.
Click to expand...
Click to collapse
Someone recommened to install the dolby app and it would work going to try it and let you know.
MStrawder said:
Viper4Android That's the thread. Its towards the end. As far as troubleshooting, I can only recommend removing all of the modules and starting from scratch. The steps at the top of this thread worked perfectly for me.
Click to expand...
Click to collapse
So far nothing i have done has fixed the impulse problem says its not there but the files are in there.
I don't have the link, but Google for Viper4Android 2.7 profiles. A guy has a GitHub page where he's updated them all to work with Viper 2.7. I remember having to download those as the old profiles didn't seem to be recognized.
MStrawder said:
I don't have the link, but Google for Viper4Android 2.7 profiles. A guy has a GitHub page where he's updated them all to work with Viper 2.7. I remember having to download those as the old profiles didn't seem to be recognized.
Click to expand...
Click to collapse
So afterman trys i was able to get the convolver and impulse response to work. One last question on my old one plus 7 pro i have viper installed with a rom on it and i have this layout wanted to know where i could find this version. Also Its the same version i am using but the layout is different.
I can't spot a difference in the two images. It won't enable though until you toggle the Master Power button to on.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
isn't it yet to be sold and aquired?
more_than_hater said:
isn't it yet to be sold and aquired?
Click to expand...
Click to collapse
I believe it is out in China already
JPower123 said:
I believe it is out in China already
Click to expand...
Click to collapse
Yes, it is out in China and launching on Feb 7 here in India! I'm interested in this phone...
Wasim_Bu said:
Yes, it is out in China and launching on Feb 7 here in India! I'm interested in this phone...
Click to expand...
Click to collapse
What about USA? EU?
luckychukiye said:
What about USA? EU?
Click to expand...
Click to collapse
Pretty sure it's also Feb 7 for USA, not sure about EU, but probs same
I am also waiting for India, to install OOS.
What is kernelSU? I'm wondering if Magisk works on it, it SHOULD being that it's just a patched boot image. But I'm curious to know
H4X0R46 said:
What is kernelSU? I'm wondering if Magisk works on it, it SHOULD being that it's just a patched boot image. But I'm curious to know
Click to expand...
Click to collapse
GitHub - tiann/KernelSU: A Kernel based root solution for Android
A Kernel based root solution for Android. Contribute to tiann/KernelSU development by creating an account on GitHub.
github.com
luckychukiye said:
What about USA? EU?
Click to expand...
Click to collapse
It's launching on Feb 7th for USA and UK!
huangsijun17 said:
GitHub - tiann/KernelSU: A Kernel based root solution for Android
A Kernel based root solution for Android. Contribute to tiann/KernelSU development by creating an account on GitHub.
github.com
Click to expand...
Click to collapse
A new root solution? Does Magisk not work on the OnePlus 11 or are they both viable options? I'm confused now.
H4X0R46 said:
A new root solution? Does Magisk not work on the OnePlus 11 or are they both viable options? I'm confused now.
Click to expand...
Click to collapse
A new root solution, can run with Magisk at the same time.
Because when I just got the phone, there was no TWRP and ZIP flashing package. I'm having a hard time installing Magisk directly. But after I gave Magisk Manager Root permission with KernelSU, I installed Magisk directly.
huangsijun17 said:
A new root solution, can run with Magisk at the same time.
Because when I just got the phone, there was no TWRP and ZIP flashing package. I'm having a hard time installing Magisk directly. But after I gave Magisk Manager Root permission with KernelSU, I installed Magisk directly.
Click to expand...
Click to collapse
When you root with magisk. You need to unlock the bootloader. Then install magisk manager app. Pull your stock boit.img from stock firmware and put it on phone. Open magisk manager and select install then patch boot.img . Then copy the generated image magisk patched image to computer adb folder. Then reboot phone to fastboot. On computer type fastboot boot (name of patched boot.img).img phone will reboot and have root. Go back to magisk and select direct install then reboot.
toolhas4degrees said:
When you root with magisk. You need to unlock the bootloader. Then install magisk manager app. Pull your stock boit.img from stock firmware and put it on phone. Open magisk manager and select install then patch boot.img . Then copy the generated image magisk patched image to computer adb folder. Then reboot phone to fastboot. On computer type fastboot boot (name of patched boot.img).img phone will reboot and have root. Go back to magisk and select direct install then reboot.
Click to expand...
Click to collapse
No. I never exported boot.img or boot_init.img from my phone. There is also no unpacking payload.bin to extract them. After installing KernelSU and KernalSU Manager, I use KernelSU to give Magisk Manager a root privilege. Magisk Manager will automatically install Magisk.
In addition, Magisk needs to patch boot_init.img in devices pre-installed with Android 13, and the flash command is also fastboot flash boot_inti boot_init.img.
huangsijun17 said:
View attachment 5804063
Click to expand...
Click to collapse
Hi,
can you pleaaase try this app if it works with root or no??
CIB Egypt Mobile Banking - Apps on Google Play
The CIB Mobile Banking app is designed to meet all your banking needs.
play.google.com
loshabih said:
Hi,
can you pleaaase try this app if it works with root or no??
CIB Egypt Mobile Banking - Apps on Google Play
The CIB Mobile Banking app is designed to meet all your banking needs.
play.google.com
Click to expand...
Click to collapse
Three interfaces: GKI supported, GKI not supported and already installed. In addition, for devices that do not support GKI, it is also possible to compile the kernel yourself.
huangsijun17 said:
View attachment 5811645
View attachment 5811647View attachment 5811651
Three interfaces: GKI supported, GKI not supported and already installed. In addition, for devices that do not support GKI, it is also possible to compile the kernel yourself.
Click to expand...
Click to collapse
thanks for your reply,
my main question was if you have kernelSU can you try the app that i mentioned and see if it works or no?
other question can you share any tutorial how to build GKI kernel ?
loshabih said:
thanks for your reply,
my main question was if you have kernelSU can you try the app that i mentioned and see if it works or no?
other question can you share any tutorial how to build GKI kernel ?
Click to expand...
Click to collapse
I installed Magisk and KernelSU at the same time, so I can't test the APP for you. But in theory, KernelSU uses a whitelist system, and unauthorized software cannot detect the existence of the su file.
loshabih said:
thanks for your reply,
my main question was if you have kernelSU can you try the app that i mentioned and see if it works or no?
other question can you share any tutorial how to build GKI kernel ?
Click to expand...
Click to collapse
For devices that support GKI 2.0, you can directly download the corresponding version of boot.img from Github Action to flash in.
huangsijun17 said:
I installed Magisk and KernelSU at the same time, so I can't test the APP for you. But in theory, KernelSU uses a whitelist system, and unauthorized software cannot detect the existence of the su file.
Click to expand...
Click to collapse
can you lock the bootloader while you have kernelSU? as the app is checking the bootloader status?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
KernelSU for Nubia Z17 Based on Android 13
Overview of KernelSU
KernelSU is working in Linux kernel mode, it has more control over userspace applications.
Only App that is granted root permission can access `su`, other apps cannot perceive su.
KernelSU supports modify /system systemlessly by overlayfs, it can even make system writable.
More information: KernelSU Official Website
If you do not use modules or only use simple modules, KernelSU is not detected by default. You don't need to worry about hiding root, because the default is hiding.
(As shown in Figure 3, "Zygisk on KernelSU" module will let you loss hidden root.)
Choose one of the two download methods
Download(Github release)(stable)
Kernel HERE (Include a default one and a permissive one for GSI user)
Manager APK HERE (just download apk like this KernelSU_v0.5.7_10866-release.apk)
Notice that: I tested the Github release kernel and I wrote the system I used.
Please use the same system
(Optinal, but if you have bug may be your system is not match to my kernel)
Download(not recommend)(GitHub actions)(latest)
Kernel HERE
Manager APK HERE
Install Guide
Backup your boot.img, If something wrong, flash your original boot.img. You can get it in /dev/block/by-name/boot or your ROM.zip.
For nubia z17 (nx563j), It may work on
LineageOS 20.0(may work)
PixelExperiencePlus13(I tested)
other ROMs based on LineageOS 20.0 kernel(may work)
Use TWRP flash the kernel(boot.img) given by me.
OR use "fastboot flash boot boot.img" flash the kernel(boot.img) given by me.
Install the KernelSU's manager.apk.
Enjoy it.
Thanks
LineageOS Project
KernelSU Official Website
BugReport
@Dispossible
酷安@霁月难逢彩云亦散
sorry can i get a link to directly downloading?
and also for manager ...
and [email protected] ......
would also thank you ...
don't know why my old member name is now shown..0157horst you know
0157horst said:
sorry can i get a link to directly downloading?
Click to expand...
Click to collapse
I will add a easier download guide
Dispossible said:
I will add a easier download guide
Click to expand...
Click to collapse
maybe a new hoster not git you know
0157horst said:
maybe a new hoster not git you know
Click to expand...
Click to collapse
Add sourceforge download link.
How do you install the lsposed module? Like magisk but flash in kernelsu?
dd805bb said:
How do you install the lsposed module? Like magisk but flash in kernelsu?
Click to expand...
Click to collapse
As shown in figure 3.
Use zygisk on kernelsu https://github.com/Dr-TSNG/ZygiskOnKernelSU/releases
And lsposed on zygisk (zygisk version) (not riru) https://github.com/LSPosed/LSPosed/releases
Dispossible said:
As shown in figure 3.
Use zygisk on kernelsu https://github.com/Dr-TSNG/ZygiskOnKernelSU/releases
And lsposed on zygisk (zygisk version) (not riru) https://github.com/LSPosed/LSPosed/releases
Click to expand...
Click to collapse
Do you get a systemless host module running? Looking for how to get Adaway up and running.
dd805bb said:
Do you get a systemless host module running? Looking for how to get Adaway up and running.
Click to expand...
Click to collapse
Maybe the same as Magisk. I install a host module to prevent MIUI update, it just for test. I just copy a module randomly from another phone.
Is it also work on OneUI 5.1? I have that kernel name: 5.15.41-android 13-8-25800099-abS918BXXU1AWC8 #1 Fri Mar 24 09:14:54 UTC 2023
My device is Samsung Galaxy S23 Ultra
Thanks in advance
dd805bb said:
Do you get a systemless host module running? Looking for how to get Adaway up and running.
Click to expand...
Click to collapse
Have you found a solution?
nicky-xda said:
Have you found a solution?
Click to expand...
Click to collapse
Module for KSU
@dd805bb @nicky-xda @theoneofgod
Here is the same module as in the picture.
download and edit /system/etc/hosts in the module, and install the module.
RealMooni said:
Is it also work on OneUI 5.1? I have that kernel name: 5.15.41-android 13-8-25800099-abS918BXXU1AWC8 #1 Fri Mar 24 09:14:54 UTC 2023
My device is Samsung Galaxy S23 Ultra
Thanks in advance
Click to expand...
Click to collapse
Releases · tiann/KernelSU
A Kernel based root solution for Android. Contribute to tiann/KernelSU development by creating an account on GitHub.
github.com
go to this release link.
download the AnyKernel3-android13-5.15.78_2022-05.zip this one. and use TWRP to flash it.
请教：刷谷歌官方的GSI：gsi_gms_arm64-exp-UPB2.230407.014.A1-10066424-22683335 ，也会出现开机红色警告，为什么？
Ask: Google official GSI: gsi_gms_arm64-exp-UPB2.230407.014.A1-10066424-22683335, there will be a red warning when booting, why?
Tims Fong said:
请教：刷谷歌官方的GSI：gsi_gms_arm64-exp-UPB2.230407.014.A1-10066424-22683335 ，也会出现开机红色警告，为什么？
Ask: Google official GSI: gsi_gms_arm64-exp-UPB2.230407.014.A1-10066424-22683335, there will be a red warning when booting, why?
Click to expand...
Click to collapse
我也不知道，你动boot分区了吗？这个boot开其他系统可以吗？
I don't know. Do you edit the boot partition？This boot partition can boot other GSI rom？
Dispossible said:
我也不知道，你动boot分区了吗？这个boot开其他系统可以吗？
I don't know. Do you edit the boot partition？This boot partition can boot other GSI rom？
Click to expand...
Click to collapse
这个文件boot_permissive，只要是A13 phh GSI，都可以起到permissive的作用,且不会出现开机红色警告。对于Nippon GSI和谷歌A14 GSI，没有刷这个文件，也会出现开机红色警告，我想这个与permissive无关。
This file boot_permissive, as long as it is A13 phh GSI, can play the role of permissive, and there will be no red warning when booting. For Nippon GSI and Google A14 GSI, if this file is not flashed, there will be a red warning when booting up. I think this has nothing to do with permissive.