Hello! I want to send SMS through my accounting software using A2 Lite. This requires modem driver to be installed so that my phone is connected to the software. Where do I get modem driver for A2 lite?
Related
Hello my friends.
I'm here to ask for your help, could someone please help me.
I have a Samsung Galaxy Note 10.1 2014 edition SM-P601 (wifi + 3G) variant, it has installed Android 5.1.1 Lollipop.
From the settings menu i already notice that my tablet has a Kenya (AFR) Firmware.
At this point i have bad wifi connections and bad GSM internet connections. The signal is very weak, and the speeds are always arround 1mbps / 2mbps / 6mpbs.
I assume that changing the firmware to another version, should fix my problem.
The situation is that i can't flash any other stock firmware or custom firmware. Even i can't flash any recovery (TWRP or CWM) in my device.
When i start the flash process in ODIN, some errors occurs. i get stucked on "Get PIT for Mapping..." and the process stops.
I can't do anything on my tablet.
Product Name : lt033gxx
Product Code : SM-P6010ZWEAFR
Original CSC Code : AFR
Firmw CSS Code : AFR
Active CSC Code: AFR
CSC Country : Kenya / AE
BL Version : P601XXSDPK1
PDA Version : P601XXSDPK1
CSC Version : P601OJVDPI1
Modem : P601XXUDPC1
How can i pass this issue, i want to flash or a custom rom or another stock rom (like the russian's (SER) one).
Best regards from Portugal.
TM
so much views.... and nobody can help me... :crying:
I've flashed my tablet lots of time using either ODIN or TWRP, and I've never encountered something like this. Perhaps you should try finding the full release of stock firmware for p601? The one that also has the bootloader, partition table, whatever, that also has files attachable to ODIN's BL, AP, CSC etc. I'm using P600, I have the full actual firmware release that I can flash using ODIN, in case something goes really badly, where it basically deletes everything and installs fresh software, partitions and all. Resets all to stock of course, but fixes every single problem. Works all the time I need it to. However, in case you do have such a release, have you tried using ODIN from another computer?
See, apparently there's an issue, in which you have to connect the tablet using a USB 2.0 port (black colored), rather than 3.0 (blue colored). It's related to drivers, specifications, or whatever thingamagic beneath the carpet, but I always flash and connect using 2.0 port, on a Windows 7 PC. USB 3.0 gives me lots of issues, such as device not recognised, random disconnection etc.
Another suggestion, in addition to connecting using port 2.0 from another computer, is to use a different ODIN version? Try searching for releases that are used/recommended by developers of the device.
Finnaly, i just got my tablet flashing again.
I just resolved those problems.
I tested using my other PC, with other O.S (windows 7) other diferent pc, and the flashing process worked like a charm
PS: i always use 2.0 usb ports.
But my wifi and gsm connections speeds remains the same, i continue to have very bad and weak connections speeds.
I don't know how to resolve this issue. Maybe replacement the wifi and gsm boards or antennas may resolve the issues....
Hi, I bought my device with global stable 8.5 rom with officially unlocked bootloader with replaced imei (Turkey Problems).
Installed miui 9 developer beta without problem (xiaomitool)
Downloaded 9 stable recovery virsion and installed with Setting, system updates, select package...
Device booted but no sim or no wifi network. So I cannot pass mi cloud account validation.
I can flash twrp and all fastboot versions of xiaomi roms.
Xiaomi roms can boot but I can not pass mi cloud step.
RR, mokee roms installed succesfully but they don't boot.
I have QCN file backup but I can not restore it because I can not take phone to diag mode over twrp.
Is this problem related to QCN file, any suggestions ?
same problem here
You could try with a usb type c to ethernet adapter to pass activation.
Strange Problem you ve got
Hey! I wanted to ask if you found a fix for your issue since I am having the same problem now after updating my phone.
Ty
Mokee and RR will probably work if you format phone by typing yes in twrp after installing the zip
el3c said:
You could try with a usb type c to ethernet adapter to pass activation.
Strange Problem you ve got
Click to expand...
Click to collapse
How it is work?
Hi. I have this problem. Sometimes bluetooth works. Others when i switch on the bluetot automatically switch off again
I was on xiaomi. Eu 30 aug, tried to downgrade to global with twrp and i get bricked
Then i flash with edl the fastboot developer rom with miflash, next flash twrp and reinstall xiaomi. Eu and now i have this issue.(see video)
Can help me please, someone have also this problem? Thanks
https://mega.nz/#!5pshBQ5I!b7U3WNF2-NfMvgW1owYJpHWCDH3J16J_x2hgE4W2bnM
jorgeepelos said:
Hi. I have this problem. Sometimes bluetooth works. Others when i switch on the bluetot automatically switch off again
I was on xiaomi. Eu 30 aug, tried to downgrade to global with twrp and i get bricked
Then i flash with edl the fastboot developer rom with miflash, next flash twrp and reinstall xiaomi. Eu and now i have this issue.(see video)
Can help me please, someone have also this problem? Thanks
https://mega.nz/#!5pshBQ5I!b7U3WNF2-NfMvgW1owYJpHWCDH3J16J_x2hgE4W2bnM
Click to expand...
Click to collapse
What are you trying to do with Bluetooth? What is the current firmware you are using?
I had issues with EU rom before connecting my firbit. Then I realised when I delete the device from BT settings and let the firbit app add it back it works fine. I think there is a bug in the firmware for BT cause I found other people commenting similar issues.
I have the same problem! Bought my Max3 128GB/6GB from Tradingshenzen with Xiaomi EU preinstalled. I reflashed it (but did not try anything with Mi Flash) and sometimes BT doesn't work.
Sometimes using CIT and testing Bluetooth functionality fixes it - but only until the next reboot. If bluetooth works after reboot it does only until i go into flight mode. After switching flight mode off bluetooth is broken until the next reboot.
Really strange and i hope this is not a hardware issue.
After Bluetooth worked all day I had the phone in flight mode and charging over night and Bluetooth is broken again. Two reboots and the test menu fixed it for now.
Can anyone with a working global ROM with correct modem post its broadband version please?
Hi guys,
I need help. I have been using my Mi 10t pro for a year now. Currently, I am having problems with it. First, it kept on restarting. after that I lost all network signal on sim 1 and sim 2. I currently running on Global firmware 12.5.4. I am not a gamer so this phone has not been thermally abused. any advise on how to deal with this?
Update: I tried to hard reset. it did not work. still having the same problem
Hello,
following the installation of OxygenOS 12 beta 1,2,3 when I check the automatic connection 5g, 4g, 3g, ... the connection is not stable it switches between no network, double sim logo, restoration of the 5g connection and the phone ended up shutting down and restarting. when I am in automatic connection 4g, 3g, ... the phone works fine. if a solution exists thank you.
MSM tool.
I've got the same last week.
First I tried downgrade rom. 1,2 times. The third time flashed correct and I was back on 11. But the shutdown was still there.
MSM tool did the job. My phone works again.
Hello
What I MSM tool ? It's an APK download?
ambares said:
Hello
What I MSM tool ? It's an APK download?
Click to expand...
Click to collapse
its a tool used for when your phone is bricked and need it to return to stock stable Oxygen os with locked bootloader