Develop Bugs

How to permanently disable T-Mobile My Account?

every time i restart it comes back.. anybody know how to delete it or permanently disable it? Root or nonRoot method? Thanks!

mcguinness89 said:
every time i restart it comes back.. anybody know how to delete it or permanently disable it? Root or nonRoot method? Thanks!
Click to expand...
Click to collapse
Hi, you can uninstall any don't want using Titanium Backup if your phone is Rooted. I don't think there is a way to do it with a non-Rooted phone., hope this help!

settings --> applications manager --> T-Mobile My Account --> uninstall updates
Once you have done that you go to
settings --> applications manager --> all --> T-Mobile My Account --> Disable

shadydvl said:
Hi, you can uninstall any don't want using Titanium Backup if your phone is Rooted. I don't think there is a way to do it with a non-Rooted phone., hope this help!
Click to expand...
Click to collapse
True! Forgot about that, thanks
settings --> applications manager --> T-Mobile My Account --> uninstall updates
Once you have done that you go to
settings --> applications manager --> all --> T-Mobile My Account --> Disable
Click to expand...
Click to collapse
this method doesn't work i tried that of course. It only works until you restart the phone

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It works for me so far. Are you trying to get rid of that status bar up top?
Sent from my SGH-T889 using Tapatalk 2

Do you really want to disable the app or just rid of it from the notification bar? If so, just long press it in the notification bar till a little menu pops up saying app info. Click on that and then unmark "Show notifications"
Sent from my SGH-T889 using Tapatalk 2

The "turn off" button on my Samsung Savant with Android 4.4.2 just worked
The T-Mobile My Account app on my Samsung Savant with Android 4.4.2 was using more battery than any other app. I pressed the turn off button under "settings", "application manager", accepted the warning message that doing so might break things, and it just worked. T-Mobile My Account has not come back when I restarted my phone. (It is not obvious how to turn the app back on, but I have not looked hard.) I can still connect to the T-Mobile network. My phone's battery life seems considerably longer. Battery use when the phone is idle and in airplane mode with the WiFi radio also turned off is now under 0.5% per hour. I did not root my phone. I can check my data usage by placing a call to #WEB# (#932#) now that the app is no longer displaying that information for me. I am -- so far -- delighted with the results of removing this app. I am not an expert on T-Mobile internals-- so I do not know who should expect to have an experience similar to mine.

I had this app disabled in my note 4 & then needed to re-enable it for a day when my alt choice app had a problem until it was updated, now no matter what I do the disable button is greyed out. not rooted & wasn't when it worked the first time. Suggestions?

If you are rooted, then rename the .apk to something else (like ....apk.bak).

Terminal Emuator + NoBloat Free work best for me coz of the "Backup & Uninstall" option. With that i remove all those bloatware apps especially KNOX Files & still back them up thou u can delete permanently .

SOLVED on Android 5.1.1 - Disabling (not just hiding notifications)T-Mobile MyAccount
mcguinness89 said:
every time i restart it comes back.. anybody know how to delete it or permanently disable it? Root or nonRoot method? Thanks!
Click to expand...
Click to collapse
This worked for my non-rooted Galaxy S6 Edge running 5.1.1. Download Debloater to your PC. Plug in your device from your PC. Select Filter, and type "com.tmobile.pr.mytmobile," or any derivation of the name (i.e., "my"). Select the file and check the box. Click on Apply. You're all set. It is DISABLED and hidden. I watched the icon in the notification bar disappear as soon as I clicked Apply. It hasn't returned. If you need it later, you can uncheck the box and click Apply. For step by step, visit You Tube "Best Debloater Tool for Your Android Device"
American Spectator

tb21666 said:
needed to re-enable it for a day when my alt choice app had a problem?
Click to expand...
Click to collapse
NotAvantSavant said:
The T-Mobile My Account app on my Samsung Savant with Android 4.4.2
Click to expand...
Click to collapse
mcguinness89 said:
every time i restart it comes back.. anybody know how to delete it or permanently disable it? Root or nonRoot method? Thanks!
Click to expand...
Click to collapse
If any of you need a way to natively check your data usage minus Binge-On without the app installed, check out my thread: T-mobile My Account w/ Binge-On Alternative
I also show how to integrate data usage with Tasker.
Hope you enjoy

[Q] [Stock rooted 4.1.2] I can't set my phone on 4G (LTE)

Hi XDA members !
I need your help about an issue I encountered on my Optimus G E975.
I'm French, my carrier is Free and I recently activated the 4G (LTE) option proposed in my plan, no problem.
I then wanted to enable the 4G network mode in my stock ROM, here comes the problem !
The LG's ROM only let me choose between 2G, 2G/3G or 3G networks. My phone is compatible, my APN are ok, Free's settings are ok too... So I decided to modify the build.prop file to force the 4G choice. I edited those lines :
- ro.telephony.default_network (changed value from 9 to 10, referring to a Google Code thread)
- telephony.lteOnCdmaDevice=1 into telephony.lteOnGsmDevice=1
I can now choose 2G/3G/4G setting and it seems to be working, but after each reboot, it doesn't stay checked and goes back to "2G/3G".
Can you help me please ?

xandersx said:
Hi XDA members !
I need your help about an issue I encountered on my Optimus G E975.
I'm French, my carrier is Free and I recently activated the 4G (LTE) option proposed in my plan, no problem.
I then wanted to enable the 4G network mode in my stock ROM, here comes the problem !
The LG's ROM only let me choose between 2G, 2G/3G or 3G networks. My phone is compatible, my APN are ok, Free's settings are ok too... So I decided to modify the build.prop file to force the 4G choice. I edited those lines :
- ro.telephony.default_network (changed value from 9 to 10, referring to a Google Code thread)
- telephony.lteOnCdmaDevice=1 into telephony.lteOnGsmDevice=1
I can now choose 2G/3G/4G setting and it seems to be working, but after each reboot, it doesn't stay checked and goes back to "2G/3G".
Can you help me please ?
Click to expand...
Click to collapse
Well, in any case, this is not a big problem.. You can also enter the secret code which i dont remember now, and force LTE, without any build.prop line. The problem is i dont remember the secret code menu.
EDIT: *#*#4636#*#*. Tap the first option, and scroll down. You will see a list. Tap and select LTE or 4G. Reboot and try if it works.

nch26 said:
Well, in any case, this is not a big problem.. You can also enter the secret code which i dont remember now, and force LTE, without any build.prop line. The problem is i dont remember the secret code menu.
EDIT: *#*#4636#*#*. Tap the first option, and scroll down. You will see a list. Tap and select LTE or 4G. Reboot and try if it works.
Click to expand...
Click to collapse
I just tried your idea. After *#*#4636#*#*, selected the first option ("Phone informations"), that displays the page with my phone infos but it's not accessible because of a pop-in saying "The application does not work on this device."
I can't do anything...

xandersx said:
I just tried your idea. After *#*#4636#*#*, selected the first option ("Phone informations"), that displays the page with my phone infos but it's not accessible because of a pop-in saying "The application does not work on this device."
I can't do anything...
Click to expand...
Click to collapse
Its weird since your phone is same like me...

nch26 said:
Its weird since your phone is same like me...
Click to expand...
Click to collapse
I tried flashing the .KDZ file compatible with my phone, no more success...
I'll keep me searching for a solution, it's frustrating to have a 4G-ready phone without 4G.

xandersx said:
I tried flashing the .KDZ file compatible with my phone, no more success...
I'll keep me searching for a solution, it's frustrating to have a 4G-ready phone without 4G.
Click to expand...
Click to collapse
Sorry for no solution !

nch26 said:
Sorry for no solution !
Click to expand...
Click to collapse
No problem, thanks for your try

I have the same problem. The 4G option just wont stick!
I'm on stock 4.1.2 and have not changed anything - had the 4G option from the get go. I also can't access the "secret menu" when typing in *#*#4636#*#* - I'm getting the same error.
Been looking for a solution for days, but nothing. Talked to LG - they suggested to reset the APN and then do a factory restore of the phone if that did not work.
Anybody found a solution?

nch26 said:
Well, in any case, this is not a big problem.. You can also enter the secret code which i dont remember now, and force LTE, without any build.prop line. The problem is i dont remember the secret code menu.
EDIT: *#*#4636#*#*. Tap the first option, and scroll down. You will see a list. Tap and select LTE or 4G. Reboot and try if it works.
Click to expand...
Click to collapse
bullcrap why is not working ?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

GalaxySIIII said:
bullcrap why is not working ?
Click to expand...
Click to collapse
Dont support on your optimus g variant.

nch26 said:
Dont support on your optimus g variant.
Click to expand...
Click to collapse
there must be different code then

Hi guys!
It's been a while since my last message here.
Just back to say my problem was solved by a little OTA update which probably brings valid LTE/4G configuration for my carrier (Free).
Today, I'm facing the same problem but on the GEE 3 ROM freshly flashed. Things are progressing but some problems stay the same x).
I'll contact devs about those problems.

[Q] unlock AWS on Tab S 8.4 LTE

I just got my new Samsung T705 but it didn't work with my carrier WIND which uses AWS frequencies, do you know if there is away to unlock these bands on the Tab S T705

Hakams said:
I just got my new Samsung T705 but it didn't work with my carrier WIND which uses AWS frequencies, do you know if there is away to unlock these bands on the Tab S T705
Click to expand...
Click to collapse
i have been trying to discover if we can unlock the american lte frequencies through software only & ran across a thread online which allows u to enable/disable individual bands...i will see if i can hunt down the original post as i wouldnt want to claim the fame if it works for u but try this
!. dial *#0011# which will take u to service mode
2. press the 3-dot menu button then hit back (NOT the hard button)...do this again & u will end up at the main menu
3. choose selection [2] ue setting & information, then [1] setting, followed by [1] protocol , next [2] nas, after that [1] network control
4. finally pick [4] band selection & this will bring u to the page where u want to be...just remember that an asterick means its selected
always use "3 dot menu-back" & NOT the physical buttton...dont forget to press the '"apply band configuration" when you're done & then "menu-end"

THEDEVIOUS1 said:
i have been trying to discover if we can unlock the american lte frequencies through software only & ran across a thread online which allows u to enable/disable individual bands...i will see if i can hunt down the original post as i wouldnt want to claim the fame if it works for u but try this
!. dial *#0011# which will take u to service mode
2. press the 3-dot menu button then hit back (NOT the hard button)...do this again & u will end up at the main menu
3. choose selection [2] ue setting & information, then [1] setting, followed by [1] protocol , next [2] nas, after that [1] network control
4. finally pick [4] band selection & this will bring u to the page where u want to be...just remember that an asterick means its selected
always use "3 dot menu-back" & NOT the physical buttton...dont forget to press the '"apply band configuration" when you're done & then "menu-end"
Click to expand...
Click to collapse
Thank for this very useful information, WIND uses AWS, with bands 1700/2100, I selected those frequency when I was in the menu and made sure to press apply band configuration, i restarted the device, but still not registering on WIND network. however now for the first time I see the network signal strength full. Did I miss anything?

Hakams said:
Thank for this very useful information, WIND uses AWS, with bands 1700/2100, I selected those frequency when I was in the menu and made sure to press apply band configuration, i restarted the device, but still not registering on WIND network. however now for the first time I see the network signal strength full. Did I miss anything?
Click to expand...
Click to collapse
The only other thing i can think of would be in "settings-connections-more networks-mobile networks" and choosing network operators which will bring up a list of all available service in the area....it will take about 30 seconds to find them so be patient. U can also try the network mode option in the same menu...the last thing i would suggest is to remove then re-insert the sim and/or try a known working one

preferred_network_mode
Any idea where the list of device available network modes are kept? I remember seeing it (possibly xml or db) somewhere in /system (a very long time ago).
I wish to try and add all available options to a Synapse control and write the preferred (selected ) network mode to:
/data/data/com.android.providers.settings/databases > global > preferred_network_mode xx
Basically require a number that represents each type of network mode for our device. ie
Anyone have any insight ?
Cheers,
UITA

Deleted
Deleted

jack_ssl said:
Still LTE Option Not Showing Help Me :laugh:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Click to expand...
Click to collapse
Sometimes changing your ROM CSC to that of your carrier locale will give more options in settings (providing they are available). Don't forget changing CSC will factory reset device.

Deleted

jack_ssl said:
You Said , I Need To Reset My Device ... Then I Am Able To Get / View LTE Option On The Mobile Network Mode ... Corrrect ?
Click to expand...
Click to collapse
Read again, particularly the first line

Please Help Me
UpInTheAir said:
Read again, particularly the first line
Click to expand...
Click to collapse
Deleted

jack_ssl said:
I Can't Understand . Please Explain ...
Click to expand...
Click to collapse
If you ROM allows, sometimes changing your ROM CSC to that of your carrier locale will give more options in settings
You can Google for suitable CSC
If you change CSC, it will factory reset your device.

UpInTheAir said:
If you ROM allows, sometimes changing your ROM CSC to that of your carrier locale will give more options in settings
You can Google for suitable CSC
If you change CSC, it will factory reset your device.
Click to expand...
Click to collapse
Thanks ....

http://forum.xda-developers.com/showthread.php?t=3036751
Could be of some use??

Rooted Hotspot on MM[Updated 5/11/2016]

Rooted only:
Download app: http://d-h.st/ppAR
Make sure unknown sources is checked
Install
open app
Enable native hotstop
Reboot
done
OLD:
Backup
Download sqlite editor from playstore
Open app
Open menu
open database
by browsing.
Then go to data/data/com.android.providers.telephony
Databases
Click Telephony.db press select at the bottom
select carriers
click data in tabs
Edit only n.ispsn apns 4 in all click edit to the left
Scroll down to Type and add ",dun" without " or spaces after mms
Click ok on each after changing
Reboot
Some changes were changed from the OP to work on edge plus.
Thanks for info from (Sham-roc)

MonkeyAround said:
Rooted only
Backup
Download sqlite editor from playstore
Open app
Open menu
open database
by browsing.
Then go to data/data/com.android.providers.telephony
Databases
Click Telephony.db press select at the bottom
select carriers
click data in tabs
Edit only n.ispsn apns 4 in all click edit to the left
Scroll down to Type and add ",dun" without " or spaces after mms
Click ok on each after changing
Reboot
Some changes were changed from the OP to work on edge plus.
Thanks for info from (Sham-roc)
Click to expand...
Click to collapse
Well Easier way is to is after rooted is to install Galaxy Tools you can find it in the note 5 sprint area ad install and select enable hotspot and it will reboot and your done . been on root and xposed since the mm tar was first posted and everything is still running smooth.
Click to expand...
Click to collapse

mystahsouljahboy said:
Well Easier way is to is after rooted is to install Galaxy Tools you can find it in the note 5 sprint area ad install and select enable hotspot and it will reboot and your done . been on root and xposed since the mm tar was first posted and everything is still running smooth.
Click to expand...
Click to collapse
Do you know how to get Hotspot toggle back in notification panel.
Click to expand...
Click to collapse

MonkeyAround said:
...............
Scroll down to Type and add ",dun" without " or spaces after mms
Click to expand...
Click to collapse
hi!
please show screenshot
with these changes
thanks

Did all this, changed the 4 entries with no spaces or ". Rebooted, It launched hotspot at first, then about 15 seconds past and it shut down with the "subscribe" pop up. Checked the database again and everything is changed how I changed it. Very weird. I'm using the latest build on the S6 Edge+ from sprint. Below is a screenshot of my database, did I do something wrong? And yes I'm fully rooted!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

intristin said:
Did all this, changed the 4 entries with no spaces or ". Rebooted, It launched hotspot at first, then about 15 seconds past and it shut down with the "subscribe" pop up. Checked the database again and everything is changed how I changed it. Very weird. I'm using the latest build on the S6 Edge+ from sprint. Below is a screenshot of my database, did I do something wrong? And yes I'm fully rooted!
Click to expand...
Click to collapse
Just make it easy on your self, install GT Tools. Did this last week while on vacation and had no issues with it.
Sent from my SM-G928P using XDA-Developers mobile app

Beandip-Javier said:
Just make it easy on your self, install GT Tools. Did this last week while on vacation and had no issues with it.
Sent from my SM-G928P using XDA-Developers mobile app
Click to expand...
Click to collapse
I got Galaxy Tools 3.1.5 with the 3.1.8 update from that guy in the note forums and all I get a upgrade loop and nothing happens.

Gt did the trick, some reason modding manually doesn't save after reboot. Still can't get Hotspot toggles.

Can anyone give me the link of GT?

albaniandroid said:
Can anyone give me the link of GT?
Click to expand...
Click to collapse
http://d-h.st/ppAR

bluetooth mac 00:00:46:00:00:01

Anyone with MIUI 11 Indonesia fw - Android 10 version got the bluetooth problem?
I have two Redmi Note 8 Pro and both got same bluetooth mac 00:00:46:00:00:01.

anyone?

Have you tried changing the Bluetooth codec settings under developer options? There are a couple other settings there that probably won't change the mac but can't hurt to try?

Seems the nvram data is corrupted.
Lucky the IMEI & wifi mac are intact.
Is there any way to edit this BT mac using SN Writer Tool?
I have a difficulty to find the required database file for SN Write Tools.

Maybe something is corrupted, but on both phones?
Have you tried flashing a different ROM? That would prove if the issue is in the NVRAM data.
I haven't seen any other entries about issues with the mac address on any of the other forums either.

wang1chung said:
Maybe something is corrupted, but on both phones?
Have you tried flashing a different ROM? That would prove if the issue is in the NVRAM data.
I haven't seen any other entries about issues with the mac address on any of the other forums either.
Click to expand...
Click to collapse
Yeah, strangely on both phones.
I tried Global ROM (was Indonesian ROM) but still the same.
Plus I think there's strange hardware issue when it's left cold on table overnight then I reboot it, it can't detect any SIM till another reboot.

There is an Xposed module that allows you to change it, but I think it won't work on Q. Aside from that, might have to wait for someone else to chime in.

wang1chung said:
There is an Xposed module that allows you to change it, but I think it won't work on Q. Aside from that, might have to wait for someone else to chime in.
Click to expand...
Click to collapse
could you please do me a favor?
enable Second Space then reboot then check the Bluetooth MAC.
seems there's a bug in the Android 10 ver.
also if I enable Dual Apps, there's another bug (present in Poco F1 as well) like in the screenshot, the name of all app is null.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
thanks so much.

Crescendo Xenomorph said:
could you please do me a favor?
enable Second Space then reboot then check the Bluetooth MAC.
seems there's a bug in the Android 10 ver.
also if I enable Dual Apps, there's another bug (present in Poco F1 as well) like in the screenshot, the name of all app is null.
thanks so much.
Click to expand...
Click to collapse
I'm running Android 9, did you still want me to verify the Bluetooth Mac before and after enabling second space?
Your attached screenshot is illegible

ah if you still on Android 9 then no.
coz Android 9 got no such problem.
wait, I uploaded new screenshot in the attachment.

FIXED USING THIS METHOD: https://forum.xda-developers.com/showthread.php?t=2695909
Bluetooth MAC address fix:
1. Using FX File Explorer with Root abilities, navigate to /mnt/vendor/nvdata/APCFG/APRDEB/BT_Addr then copy it to your PC.
2. Then open up the file by using Hex Editor.
3. To fix a static MAC address, just simply type in your MAC address on the first row (0000) from column (00-05). That is what your MAC address should be (Edit both files with the same MAC address). After you have modified it, put it back in the exact location and remember to change permission.
Note by me: Use FX Explorer to put the file back to device, it can set the SELinux part correctly & exactly like the original. You only need to match the rw permission with the original permission.
BLUETOOTH MAC OF OUR DEVICE IS 1 number greater than WIFI MAC. So if your wifi mac is 01:01:01:01:01:01, your bluetooth mac should be 01:01:01:01:01:02.