Can't connect Active2 to Essential PH-1 - Samsung Galaxy Watch

So I just got my Active2 and I have the Essential PH-1 running Android 10 fully stock with Sprint and it says that my phone isn't compatible with mobile service for this watch, when I try to connect it. Have all updated and required Samsung apps as far as I know.
Tizen 4.0.0.6
Software Ver. R825USQU1ASHH
It works fine and pairs with Bluetooth and everything else in the Wearables app but LTE. Can't connect to mobile data service with my phone. Am I out of luck with compatibility? Any advice?

There is a problem with watch and Android 10. There is a topic, look for it.

Yes I read that thread. The Wearables app works fine on my phone, and bluetooth connections work fine. I just can't enable mobile service connection between my phone and the watch. I was hoping there was a way to connect them so I could make calls and texts.
I didn't want to set it up standalone so that I don't have to deal with 2 different phone numbers.

Related

Connecting to Note 3 via bluetooth

I seem to have a problem connecting my new 10.5" tab s to my Verizon note 3 via bluetooth. It shows that they are paired but when I click connect it acts like it will connect for about 3 seconds (it says connecting...) then just goes back to saying paired. The dude at the Samsung display in Best Buy claimed these 2 devices simply cannot connect through bluetooth which didn't seem right. Tonights?
What I've tried so far: obviously restarting both devices and completely unpairing them as well to no avail...
AndroidFTW11 said:
I seem to have a problem connecting my new 10.5" tab s to my Verizon note 3 via bluetooth. It shows that they are paired but when I click connect it acts like it will connect for about 3 seconds (it says connecting...) then just goes back to saying paired. The dude at the Samsung display in Best Buy claimed these 2 devices simply cannot connect through bluetooth which didn't seem right. Tonights?
What I've tried so far: obviously restarting both devices and completely unpairing them as well to no avail...
Click to expand...
Click to collapse
It isn't right. I have a Note 3 also but with Sprint. I don't have any problem connecting. I would assume it is not the carrier that is causing the problem. It is well known that the Samsung reps at BB know absolutely nothing about their products. I also assume you tried shutting BT off on both devices then re-activating them? Is NFC on on your note? If it is try shutting that off as the slate is not NFC capable and it may be interfering. Just some suggestions.
I have a Note 3 as well from sprint and haven't had an issue connecting via bluetooth. I'll take a look around to see if anyone else is having this issue. Hopefully you'll be able to resolve it.
I did a factory wipe on my phone thinking that may help but was unsuccessful. Those of you who are able to connect your phone and tab, can you use the Internet connection from the phone using bt on the tab?
Update number 2...I factory wiped the tablet too and still no luck. It automatically wants to connect for Internet access and if I have the tab connectrd to WiFi it says it can't connect to bluetooth for tethering if WiFi is connected. Turning off WiFi does nothing...
I have the ATT Note 3 and am able to connect to my Tab S with Bluetooth. On both devices it only says paired. The only time it said connecting is when I initially paired the two devices, once paired the "connecting" was replaced by "paired". I can't find anywhere it says connected yet I am able to send files back and forth between the two via Bluetooth. I don't use Bluetooth to tether so not sure if that is where it's supposed to say connected. Sorry if we're talking about two different things, just trying to help.
Sent from my SM-T800 using Tapatalk
Well I feel stupid now haha. I can't connect to use Bluetooth for an Internet connection as I was attempting, but I can send and receive files to and from the tab and phone.

[Q] Connection Issues

I am having problems keeping the watch connected to my phone. Android Wear will report it's connecting... then disconnect very quickly. It will repeat this cycle over and over. On the watch, it shows a little cloud icon with a slash thru it, pulling up Google Now reports the watch is disconnected.
My phone reports it is paired with the watch via bluetooth and the radio is turned on. I tried changing my wifi access to use my 5G radio instead of 2.4 but that didn't help. No other bluetooth devices are paired with my phone or with my watch. Phone is a Galaxy Note 2 running Android 4.4.2. Any suggestions that I can try?
I have this as well with my GS4.
are you having this issue when the phone is near you or like say across the house from you?
I got my watch yesterday.
Problem occured with out of the box firmware (4.4.4). I manage to reconnect and connect last enough to update to 5.0.2. ANd there I was hoping it will be good. But unfrontunately no. I still have the problem.
I have a galaxy note 4 (N910F) on Lollipop. I reset factory my phone and the watch. I have stil random disconnections. And when disconnected, It is hard to made the watch reconnect. Didn't have any problem with my LH watch R.
Kind of disappointed by the Moto 360 (a colleague with a one plus one and the same watch doesn't have such problems.
Really don't know mess things up.
What a burden to have to reset the watch each time we need to connect to a new mobile / reconnect to the current one.
They should have add an option to connect / disconnect

How to use your laptop as a phone?

Hi guys,
I'm looking for a software which will allow me to connect any android phone to a Windows laptop or a PC and then use the Windows device as a phone - to make & receive calls and to send/review/reply to messages.
This is already implemented in a lot of vehicles when you pair the phone and then call/answer through the car's UI. I'm looking for the same thing but using a Windows device (laptop, PC - with Bluetooth) like the car in the example.
Can you advise me about such a software?
Thanks!
Solution found!
I found a solution for Samsung devices and it's called SideSync. It's a Samsung app for the phone and a pc version with Windows and Mac support. It allows you to do everything on the PC which is great.
Since I recently switched from HOX to Galaxy S6 Active it works great for me. Don't know about other phones thought. It may be restricted to Samsung devices only? You can try and advise if it works for you.

App Gree+ (air conditioners) on Mi Mix 2

Hi friends, I have a curious problem. On my Gree brand air conditioners the application recognizes and allows you to remotely control air conditioners only if I am connected with Wi-Fi. If instead I am connected with 4G it tells me that the machines are not connected. The app works like this: I created an account and then added it to the account (cloud). From the phone of my girlfriend, xiaomi redmi note 5, instead everything works very well even with the 4G connection. It is as if from my phone the Gree server was not reachable. I've already tried resetting android network settings without success. How do you think I can solve? My phone has root (magisk manager). Thanks in advance for the help you can give me.
bricca said:
Hi friends, I have a curious problem. On my Gree brand air conditioners the application recognizes and allows you to remotely control air conditioners only if I am connected with Wi-Fi. If instead I am connected with 4G it tells me that the machines are not connected. The app works like this: I created an account and then added it to the account (cloud). From the phone of my girlfriend, xiaomi redmi note 5, instead everything works very well even with the 4G connection. It is as if from my phone the Gree server was not reachable. I've already tried resetting android network settings without success. How do you think I can solve? My phone has root (magisk manager). Thanks in advance for the help you can give me.
Click to expand...
Click to collapse
Probably Gree's issue. Some apps may not be optimized for each devices
Hi, the strangest thing is that until a few days ago I could connect to air conditioners remotely (4G). Suddenly it stopped working. I tried also from samsung galaxy tab 10 tablet but even from there it doesn't connect. Could there be any network settings to verify? Something that prevents devices from reaching the server? Thank you.
Resolved. This is an update of the app that creates this problem. Returning to the previous version works. Thank you.

Mi11 Ultra Chinese Miui13 Bluetooth connected but app does not

So the phone is synced with the watch and it has worked but it gets disconnected and then the Samsung or wearOS does not connect anymore although the Bluetooth is connected.
Any idea what's going on here?
Only restart to the phone would make the Samsung app reconnect.
u can try samsung accessory service app

Categories

Resources