Before I want to say big thank you to Nankun for porting miui 11 for v30 and also another big thank you to Xiao Vic for maintenance and sharing the rom.
Also thanks to Hendavi for testing on the T-Mobile h932 to figure a way to make this time work on it
Warning: I am not responsible for any damage cause. Read instructions carefully before. I am not the creator of this rom, neither the maintainer. I am just sharing for our passion.
IMPORTANT: VENDOR PARTITION NEEDED BEFORE FLASHING!
Make sure you have VENDOR PARTITION on your device before flashing the rom or else you will get boot loop or brick. You can check the forum for how to enable vendor partition or treble on your device.
Don't flash gapps or else it will break setup. If you want Google applications, use the old method of installing gapps on miui by searching and downloading gapps installer apk file from xiaomi forum or anywhere else to get play store, contact sync and other Google services.
If you are facing bootloaps or brick after installation even when you have vendor partition, just reboot to twrp and make factory reset and reboot again.
It won't boot if you're on stock oreo, since the rom needs pie files to work properly. Make sure you're coming from stock pie rom or have once update to stock pie before installing any AOSP rom as current rom. If you're coming from AOSP pie or Android 10, make back up and flash rom after vendor partition is created.
The rom will boot on all v30 series except for Canada H933 only. If you have this H933 version, you need to convert to US998 before trying r else you will get hard brick.
Those on T-Mobile H932 should do these things. First you will need to boot the miui 10 first, by downloading the miui 10 backup zip file from the main download link and download the file miui 8.22 file and unzip it. After unzipping, place the file in the backup folder under twrp folder in the SD, then restore in twrp recovery and reboot. After rebooting, you can enjoy the miui 10 which works fully for T-Mobile h932 or if you want to update to miui 11, just download the second backup file from the link with T-Mobile H932 only, and follow the same process to restore the files then reboot. But please make sure you still have the vendor partition first before trying any of this.
INSTRUCTIONS
1. Download the rom and places it on your device sd.
2. Reboot to twrp and make back up of your current rom if incase anything, then you restore back.
3. Wipe system, data, vendor, caches then go back to flash rom zip.
4. Reboot to system then enjoy.
Bugs.
HiFi dac don't work. And NFC also don't work. Also double touch to wake don't work for now.
Aside portrait mode of xiaomi camera don't work and it will break the cam app.
Aside these everything works smoothly and stable.
Download Rom
https://jxjjxy-my.sharepoint.com/:f...9LkEhTgcSMfWYBaX3nttEhBOviTHnuQ5jZog?e=ADbORQ
T-Mobile H932 only( just unzip and restore as backup file)
https://drive.google.com/file/d/19pIBMb2W6HJ9PFcj31UVkrEXsFM-CP_C/view?usp=drive_open
Gapps installer
https://mega.nz/#!L89jQCYA!B1N4akqsDN4w4QIKYtaKWKVC8rjLDx25f0vPTZY_9fE
Vendor Partition zip file.
https://mega.nz/#!G9lQWSjL!m1U4b4DA2nXEa7VEQyG_peZfJiPd11vTl0hoFqnINFo
Use this file for creating vendor Partition by flash in twrp.
Make backup first before flashing.
Flash zip, go to wipe and advance, select resize partition, then select vendor, choose where you want to create the vendor partition from( system recommend, and also the size should be 512 and above)
After creating the vendor partition, reboot recovery and format system, vendor and caches. Now you can flash rom.
Good afternoon and thank you for sharing this with us. I have two questions for you. I followed your instructions and regarding to wiping vendor, my phone doesn't allow it to be wiped. Also when I tried to install the rom, I was receiving no os installed when trying to reboot my phone. I redownloaded the rom and and transferred to zip card in hoping that will make a difference in install. Is there a way to bypass vendor wipe or is that needed? Thank you again for adding Miui and many thanks for the porting. I have loved MIUI as long as I had android.
mcarden2006 said:
Good afternoon and thank you for sharing this with us. I have two questions for you. I followed your instructions and regarding to wiping vendor, my phone doesn't allow it to be wiped. Also when I tried to install the rom, I was receiving no os installed when trying to reboot my phone. I redownloaded the rom and and transferred to zip card in hoping that will make a difference in install. Is there a way to bypass vendor wipe or is that needed? Thank you again for adding Miui and many thanks for the porting. I have loved MIUI as long as I had android.
Click to expand...
Click to collapse
You can't wipe vendor because you don't have the partition. Download the partition file from the below link and flash via twrp. After that, go to wipe, Advance, resize partition, the select vendor and then create a vendor part. You can either create it from the data partition or system partition but I recommend system. The size should be from 512 above not below. After creating the partition, go back to wipe and then wipe system, vendor and caches, then you can now flash the rom.
File link below ?
https://mega.nz/#!G9lQWSjL!m1U4b4DA2nXEa7VEQyG_peZfJiPd11vTl0hoFqnINFo
Any screenshots? Original lg camera works? Based on aosp or stock?
lic3ns3d said:
Any screenshots? Original lg camera works? Based on aosp or stock?
Click to expand...
Click to collapse
I haven't try lg camera but Gcam works perfectly well.
lic3ns3d said:
Any screenshots? Original lg camera works? Based on aosp or stock?
Click to expand...
Click to collapse
It's a ported rom but it contains stock pie blobs
Awesome. I will try it now.
Got some good news, more good news, great news, and some bad news. The good news is with the zip file provided it installed perfectly. The more good news is the setup was easy. The great news is the camera worked perfectly portrait and landscape. The bad news is trying to figure out how to change everything to English. One thing I discovered is do not install gapps stock with the ROM. It will crash it or it did with me. Awesome port and thank you.
mcarden2006 said:
Got some good news, more good news, great news, and some bad news. The good news is with the zip file provided it installed perfectly. The more good news is the setup was easy. The great news is the camera worked perfectly portrait and landscape. The bad news is trying to figure out how to change everything to English. One thing I discovered is do not install gapps stock with the ROM. It will crash it or it did with me. Awesome port and thank you.
Click to expand...
Click to collapse
Why are you flashing gapps? I don't see anything in the instructions about doing that.
Sent from my LG-US998 using Tapatalk
Very very nice, hope will be future update
---------- Post added at 07:23 AM ---------- Previous post was at 07:22 AM ----------
Btw what firmware? Pie or oreo?
kenbo111 said:
Why are you flashing gapps? I don't see anything in the instructions about doing that.
Sent from my LG-US998 using Tapatalk
Click to expand...
Click to collapse
I tried to flash gapps to get google working for syncing purposes and install some of my favorite apps. I tried the local miui app store to download the playstore but the server is extremely slow in my area. About 2 hours and the rom was still downloading the updates prior to installing the selected apps. The rom itself is extremely smooth and running the way MIUI is expected to run without a glitch. I am just wondering if the miui store is downloading using my cellular data instead of my 400M internet.
Start point Stock Oreo Or Stock Pie ¡????
Amosika said:
You can't wipe vendor because you don't have the partition. Download the partition file from the below link and flash via twrp. After that, go to wipe, Advance, resize partition, the select vendor and then create a vendor part. You can either create it from the data partition or system partition but I recommend system. The size should be from 512 above not below. After creating the partition, go back to wipe and then wipe system, vendor and caches, then you can now flash the rom.
File link below
https://mega.nz/#!G9lQWSjL!m1U4b4DA2nXEa7VEQyG_peZfJiPd11vTl0hoFqnINFo[/QUOTE
Start point Stock Oreo Or Stock Pie ¡????
What is the TWRP Recommendad for flash this rom ?
---------- Post added at 05:21 AM ---------- Previous post was at 05:04 AM ----------
Amosika said:
It's a ported rom but it contains stock pie blobs
Click to expand...
Click to collapse
I´m stuck in Mi logo
---------- Post added at 05:21 AM ---------- Previous post was at 05:21 AM ----------
Amosika said:
It's a ported rom but it contains stock pie blobs
Click to expand...
Click to collapse
I´m stuck in Mi logo
Click to expand...
Click to collapse
Imam mustofa said:
Very very nice, hope will be future update
---------- Post added at 07:23 AM ---------- Previous post was at 07:22 AM ----------
Btw what firmware? Pie or oreo?
Click to expand...
Click to collapse
its pie, and there are updates but not weekly
Yeriorlando said:
Amosika said:
You can't wipe vendor because you don't have the partition. Download the partition file from the below link and flash via twrp. After that, go to wipe, Advance, resize partition, the select vendor and then create a vendor part. You can either create it from the data partition or system partition but I recommend system. The size should be from 512 above not below. After creating the partition, go back to wipe and then wipe system, vendor and caches, then you can now flash the rom.
File link below
https://mega.nz/#!G9lQWSjL!m1U4b4DA2nXEa7VEQyG_peZfJiPd11vTl0hoFqnINFo[/QUOTE
Start point Stock Oreo Or Stock Pie ¡????
What is the TWRP Recommendad for flash this rom ?
---------- Post added at 05:21 AM ---------- Previous post was at 05:04 AM ----------
I´m stuck in Mi logo
---------- Post added at 05:21 AM ---------- Previous post was at 05:21 AM ----------
I´m stuck in Mi logo
Click to expand...
Click to collapse
did you create the vendor to enable treble on your phone? if not the enable vendor on your phone else it wont boot
Click to expand...
Click to collapse
Yeriorlando said:
Amosika said:
You can't wipe vendor because you don't have the partition. Download the partition file from the below link and flash via twrp. After that, go to wipe, Advance, resize partition, the select vendor and then create a vendor part. You can either create it from the data partition or system partition but I recommend system. The size should be from 512 above not below. After creating the partition, go back to wipe and then wipe system, vendor and caches, then you can now flash the rom.
File link below
https://mega.nz/#!G9lQWSjL!m1U4b4DA2nXEa7VEQyG_peZfJiPd11vTl0hoFqnINFo[/QUOTE
Start point Stock Oreo Or Stock Pie ¡????
What is the TWRP Recommendad for flash this rom ?
---------- Post added at 05:21 AM ---------- Previous post was at 05:04 AM ----------
I´m stuck in Mi logo
---------- Post added at 05:21 AM ---------- Previous post was at 05:21 AM ----------
I´m stuck in Mi logo
Click to expand...
Click to collapse
you must be on stock pie, if stuck go back to twrp and do factory reset then boot again
Click to expand...
Click to collapse
If you in pie and not having vendor partition, well you need flash oreo twrp(v3.2.x.x) then go ahead for vendor installation, link = https://mega.nz/#!G9lQWSjL!m1U4b4DA2nXEa7VEQyG_peZfJiPd11vTl0hoFqnINFo
And than flash pie twrp(v3.3.x.x) reboot recovery and go ahead for Miui Rom
Btw DT2WA doesn't work, also Chinese bloatware js here, very smoth rom
Imam mustofa said:
If you in pie and not having vendor partition, well you need flash oreo twrp(v3.2.x.x) then go ahead for vendor installation, link = https://mega.nz/#!G9lQWSjL!m1U4b4DA2nXEa7VEQyG_peZfJiPd11vTl0hoFqnINFo
And than flash pie twrp(v3.3.x.x) reboot recovery and go ahead for Miui Rom
Btw DT2WA doesn't work, also Chinese bloatware js here, very smoth rom
Click to expand...
Click to collapse
He will fix DT2WA in the next update and also add always on, he said it drivers issue and he forgot to fix that. Also he is planning on porting global version for global users so let's stay tuned. I will share the next update when it is ready.
Amosika said:
He will fix DT2WA in the next update and also add always on, he said it drivers issue and he forgot to fix that. Also he is planning on porting global version for global users so let's stay tuned. I will share the next update when it is ready.
Click to expand...
Click to collapse
Also there's no gapps or play store
Imam mustofa said:
Also there's no gapps or play store
Click to expand...
Click to collapse
You have to use the old method of installing gapps on the miui Chinese rom. Use miui gapps installer apk which you can Google for it. It's works and you will get all your contacts and things back from Google play store.
Yeriorlando said:
Amosika said:
You can't wipe vendor because you don't have the partition. Download the partition file from the below link and flash via twrp. After that, go to wipe, Advance, resize partition, the select vendor and then create a vendor part. You can either create it from the data partition or system partition but I recommend system. The size should be from 512 above not below. After creating the partition, go back to wipe and then wipe system, vendor and caches, then you can now flash the rom.
File link below
https://mega.nz/#!G9lQWSjL!m1U4b4DA2nXEa7VEQyG_peZfJiPd11vTl0hoFqnINFo[/QUOTE
Start point Stock Oreo Or Stock Pie ¡????
What is the TWRP Recommendad for flash this rom ?
---------- Post added at 05:21 AM ---------- Previous post was at 05:04 AM ----------
I´m stuck in Mi logo
---------- Post added at 05:21 AM ---------- Previous post was at 05:21 AM ----------
I´m stuck in Mi logo
Click to expand...
Click to collapse
I was able to get mine fixed by format data, then wipe everything, and reboot recovery before installing miui 11. Everything works beautifully.
Click to expand...
Click to collapse
Related
I flashed a new ROM after an annoying bug from the previous ROM,then I installed some applications (including busybox),restarted it without problems,but after the next restart it was bootlooping (I don't know why,I didn't installed any other application after the first restart).I did a factory reset,I wiped the data,cache,dalvik cache,but it was still bootlooping.I wiped it again and I tried to flash another ROM (and yes,they were all compatible with my phone,and I respected the instructions,I flashed a lot of ROMs before),but,again,it was bootlooping.I wiped it one more time,and I performed a nandroid restore (from another ROM),but it was still bootlooping.WTF?I have never experienced a thing like this.Should I try to flash a ROM (stock,GioPro) with Odin?What if it would still bootloop?What should I do?
BTW:I don't know if this is important,but before I preformed the nandroid restore,I accidentally made a backup (it was made very fast),and I noticed that the date was messed up(showing year 1970).It says that it has only 16mb and the only folder existing in /system is lost+found.However,I can see my boot animation
Sorry for the eventually spelling mistakes.
ODIN
aveq8 said:
I flashed a new ROM after an annoying bug from the previous ROM,then I installed some applications (including busybox),restarted it without problems,but after the next restart it was bootlooping (I don't know why,I didn't installed any other application after the first restart).I did a factory reset,I wiped the data,cache,dalvik cache,but it was still bootlooping.I wiped it again and I tried to flash another ROM (and yes,they were all compatible with my phone,and I respected the instructions,I flashed a lot of ROMs before),but,again,it was bootlooping.I wiped it one more time,and I performed a nandroid restore (from another ROM),but it was still bootlooping.WTF?I have never experienced a thing like this.Should I try to flash a ROM (stock,GioPro) with Odin?What if it would still bootloop?What should I do?
BTW:I don't know if this is important,but before I preformed the nandroid restore,I accidentally made a backup (it was made very fast),and I noticed that the date was messed up(showing year 1970).It says that it has only 16mb and the only folder existing in /system is lost+found.However,I can see my boot animation
Sorry for the eventually spelling mistakes.
Click to expand...
Click to collapse
Flash A stock rom with odin 4.42 and start from scratch! :highfive: :fingers-crossed:
waqaswasil said:
Flash A stock rom with odin 4.42 and start from scratch! :highfive: :fingers-crossed:
Click to expand...
Click to collapse
I flashed GioPro 1.6 (I know it's old),it worked,but I couldn't see the settings app,so I copied one from CM 7.2 with adb,and guess what? It bootlooped.Even after I wiped data and cache (I can't wipe dalvik because of CWM 5.0.2.7) and now I can't even see the boot animation,it just restarts after "Galaxy Gio".Tomorrow I will try to flash the stock one(enough with flashes for today).Can you send me the link for the stock rom(I can't find it)?
aveq8 said:
I flashed GioPro 1.6 (I know it's old),it worked,but I couldn't see the settings app,so I copied one from CM 7.2 with adb,and guess what? It bootlooped.Even after I wiped data and cache (I can't wipe dalvik because of CWM 5.0.2.7) and now I can't even see the boot animation,it just restarts after "Galaxy Gio".Tomorrow I will try to flash the stock one(enough with flashes for today).Can you send me the link for the stock rom(I can't find it)?
Click to expand...
Click to collapse
Dont Worry, It Will Be Fixed
Just Do This:
1. Download A Good Custom Rom (Like Maclaw's CM9 As I Am Using This Right Now)
2. Download CWM 6.0.3.2 By MMB Team
3. Flash CWM Like You Would Flash A ROM
4. Reboot Recovery, Now You Will See The New Recovery With Greenish Background
5. Go To "Mounts And Storages" And Format System
6. Go To "Install ZIP From SD Card" And Flash The Rom
7. Now "Wipe Data/Factory Reset"
8. Reboot System Now
Your Phone Will Be Fixed If You Follow All The Instructions.
Link For CWM 6.0.3.2 By MMB Team:
https://moltenmotherboard.googlecode.com/files/cwm-6.0.3.2-ext4only.zip
---------- Post added at 07:43 AM ---------- Previous post was at 07:29 AM ----------
Or Do This:
1. Go To "Mount And Storages" And Try To Mount System/Data/Cache
0. If You cant mount even one of them download and flash this (https://moltenmotherboard.googlecode.com/files/EXT4-formatter.zip) with your existing recovery and then flash any rom (dont flash any old rom as they use RFS File System All of the newer ROMS Use ext4 FileSystem) :laugh: :good: :highfive:
---------- Post added at 07:48 AM ---------- Previous post was at 07:43 AM ----------
or if you want to flash stock rom with odin, download stock roms from here for your region:
http://www.sammobile.com/firmwares/1/
(You need to register an account to download files from sammobile) :laugh::laugh:
waqaswasil said:
Dont Worry, It Will Be Fixed
Just Do This:
1. Download A Good Custom Rom (Like Maclaw's CM9 As I Am Using This Right Now)
2. Download CWM 6.0.3.2 By MMB Team
3. Flash CWM Like You Would Flash A ROM
4. Reboot Recovery, Now You Will See The New Recovery With Greenish Background
5. Go To "Mounts And Storages" And Format System
6. Go To "Install ZIP From SD Card" And Flash The Rom
7. Now "Wipe Data/Factory Reset"
8. Reboot System Now
Your Phone Will Be Fixed If You Follow All The Instructions.
Link For CWM 6.0.3.2 By MMB Team:
https://moltenmotherboard.googlecode.com/files/cwm-6.0.3.2-ext4only.zip
---------- Post added at 07:43 AM ---------- Previous post was at 07:29 AM ----------
Or Do This:
1. Go To "Mount And Storages" And Try To Mount System/Data/Cache
0. If You cant mount even one of them download and flash this (https://moltenmotherboard.googlecode.com/files/EXT4-formatter.zip) with your existing recovery and then flash any rom (dont flash any old rom as they use RFS File System All of the newer ROMS Use ext4 FileSystem) :laugh: :good: :highfive:
---------- Post added at 07:48 AM ---------- Previous post was at 07:43 AM ----------
or if you want to flash stock rom with odin, download stock roms from here for your region:
http://www.sammobile.com/firmwares/1/
(You need to register an account to download files from sammobile) :laugh::laugh:
Click to expand...
Click to collapse
Thanks,I will try.Is CM7 fine?It's less laggy for me.And if it is,should I use the "ext4 formatter"?because now it's rfs
Flash your default firmware or download a compatible rom
Sent from my GT-S7562 using xda app-developers app
aveq8 said:
Thanks,I will try.Is CM7 fine?It's less laggy for me.And if it is,should I use the "ext4 formatter"?because now it's rfs
Click to expand...
Click to collapse
first flash ext4 formatter and then the rom
Yup CM7 has less lag and better battery life as compared to CM9/10/11:laugh:
waqaswasil said:
first flash ext4 formatter and then the rom
Yup CM7 has less lag and better battery life as compared to CM9/10/11:laugh:
Click to expand...
Click to collapse
It worked!I hope it doesn't bootloop again after installing some applications -_-
aveq8 said:
It worked!I hope it doesn't bootloop again after installing some applications -_-
Click to expand...
Click to collapse
Seems like I asked for too much.Who needs applications,anyway?I don't mind reflashing the ROM after installing one...
aveq8 said:
Seems like I asked for too much.Who needs applications,anyway?I don't mind reflashing the ROM after installing one...
Click to expand...
Click to collapse
Just Dont Try To Change System Apps With Apps That Are Not Compatible and use a good custom rom. Some Best Custom ROMS are:
CM7 By MMB Team (and all others based on it)
CM9 By Maclaw Studio
CM10.1 By Mardon
:silly:
waqaswasil said:
Just Dont Try To Change System Apps With Apps That Are Not Compatible and use a good custom rom. Some Best Custom ROMS are:
CM7 By MMB Team (and all others based on it)
CM9 By Maclaw Studio
CM10.1 By Mardon
:silly:
Click to expand...
Click to collapse
I didn't.I installed the same apps that I had before it was bricked.I will try again without installing any app.
EDIT:I followed the same instructions more than once (tried to wipe everything),tried 3-4 different ROMs but it's still bootlooping.Also,I noticed the following error in CWM "can't format unknown volume /emmc".I think I should buy a new phone,lol...
There's Still Hope!!!
aveq8 said:
I didn't.I installed the same apps that I had before it was bricked.I will try again without installing any app.
EDIT:I followed the same instructions more than once (tried to wipe everything),tried 3-4 different ROMs but it's still bootlooping.Also,I noticed the following error in CWM "can't format unknown volume /emmc".I think I should buy a new phone,lol...
Click to expand...
Click to collapse
Download A stock rom for you region from the link that i gave and flash it via ODIN V4.42
Search For A Tutorial and if you cant under it, just reply and i will post an easier one (step-by-step guide) for you :victory:
No more development from me.
XDA:DevDB Information
TWRP for the Hauwei P10 Lite, Tool/Utility for the Huawei P10 Lite
Contributors
Meticulus
Source Code: http://github.com/Meticulus
Version Information
Status: Testing
Created 2017-12-05
Last Updated 2018-01-18
Good work!!
You guys ready for custom ROMs?
This is my WAS-LX3 Running my Pure AOSP for HI6250 Devices! Installation is a bit tricky but I'll fix that up soon!
Great work!
Just tested it on my P10 lite(was-lx1c432), and it works.
Thanks for your work. I haven't tried it yet. I'm waiting for your custom Rom.
With Devcheck system info (search in playstore) I saw that my device is compatible.
Hi, I flashed it on my WAS-LX1C432 but it freezes at the screen where it asks about allowing modifications to the system partition. The build from the other thread works though, apart from decryption.
Cannot wait to get aosp good work!!
Ra2rd said:
Cannot wait to get aosp good work!!
Click to expand...
Click to collapse
Stock decryption not working here either
I have not found any easy way to get back to stock...
When i tried to flash the zip with the other TWRP build, i got error 7 : This build is for Washington, not for Warsaw.
So, i flashed the img with fastboot and it works.
Also after allowing modifications at first boot of TWRP, i don't get that msg anymore.
With the other build i had to allow it everytime i booted TWRP.
I have WAS-LX1AC432
waaagh313ph4n7 said:
Hi, I flashed it on my WAS-LX1C432 but it freezes at the screen where it asks about allowing modifications to the system partition. The build from the other thread works though, apart from decryption.
Click to expand...
Click to collapse
Touch unresponssive happened to also. I've just rebooted into recovery again. Solved.
This build works like a charm
Encryption of data will be always a problem on kirin devices ...
[email protected]@[email protected] said:
When i tried to flash the zip with the other TWRP build, i got error 7 : This build is for Washington, not for Warsaw.
So, i flashed the img with fastboot and it works.
Also after allowing modifications at first boot of TWRP, i don't get that msg anymore.
With the other build i had to allow it everytime i booted TWRP.
I have WAS-LX1AC432
Click to expand...
Click to collapse
Washington? Which device is Washington?... Other twrp is port from Washington?
WAS-TL10C01B220 cmcc/cn is work.
Tnx
Meticulus said:
Washington? Which device is Washington?... Other twrp is port from Washington?
Click to expand...
Click to collapse
I forgot to make a pic. That's what i remember. Maybe I saw or did something wrong.
Edit :
Found this with Google
https://www.frequencycheck.com/models/Az88E/huawei-p10-lite-dual-sim-lte-was-lx3-huawei-washington
[email protected]@[email protected] said:
I forgot to make a pic. That's what i remember. Maybe I saw or did something wrong.
Edit :
Found this with Google
https://www.frequencycheck.com/models/Az88E/huawei-p10-lite-dual-sim-lte-was-lx3-huawei-washington
Click to expand...
Click to collapse
Oh geez I didn't know about Washington. I thought all P10 Lite was Warsaw...:silly:
Meticulus said:
Oh geez I didn't know about Washington. I thought all P10 Lite was Warsaw...:silly:
Click to expand...
Click to collapse
Me too.
With your twrp build I tried to flash the recovery again. The zip file. And this time I didn't get any errors.
How's the progress on your rom?
I would be happy to test it.
[email protected]@[email protected] said:
Me too.
With your twrp build I tried to flash the recovery again. The zip file. And this time I didn't get any errors.
How's the progress on your rom?
I would be happy to test it.
Click to expand...
Click to collapse
The ROM is pretty good. I'm just concerned about ppl being able to go back to stock. Because the ROM is not a daily driver yet..,
Rear cam video capture not working.
Little laggies happen during ui animation.
Edit: If you are confident you can get back to stock if you need to pm me.
Any Other Testers?
If there is anyone else who is confident they can get back to stock via the 'dload' method and would like to test AOSP for the P10 Lite, pm me.
Worked for me. I needed to do a full wipe in TWRP first. ( i wiped data too, dunno if it was needed)
Flashed open gapps 7.1 pico.
There is no browser or file manager included in the rom.
So after setting up playstore, download a file manager if you need to access your ext sdcard.
Flashed supersu in twrp and have root too.
---------- Post added at 06:42 PM ---------- Previous post was at 06:15 PM ----------
Restored my apps and data with titanium Backup.
Working fine.
Maybe create a new topic for this ROM?
I made a TWRP backup. Selected everything except /cache.
With 3 button dload method i was able to go back to stock rom.
Unlocked bootloader again, flashed TWRP and then tried to restore the backup.
Got a 255 error. So i did a full wipe and formatted /data.
After this succesfully restored the backup and phone booted normally with everything intact.
So, internal storage is not encrypted in TWRP.
Rom is pretty smooth. Didn't encouter any issues. Except the known bugs.
Finger print is working, GPS too.
Didn't test NFC or dual sim.
Will use this rom and see how it goes.
edit :
Made a "tap and pay" payment in the supermarket. So NFC is working.
[email protected]@[email protected] said:
Worked for me. I needed to do a full wipe in TWRP first. ( i wiped data too, dunno if it was needed)
Flashed open gapps 7.1 pico.
There is no browser or file manager included in the rom.
So after setting up playstore, download a file manager if you need to access your ext sdcard.
Flashed supersu in twrp and have root too.
---------- Post added at 06:42 PM ---------- Previous post was at 06:15 PM ----------
Restored my apps and data with titanium Backup.
Working fine.
Maybe create a new topic for this ROM?
Click to expand...
Click to collapse
I'll create new topic for this 2morrow...:highfive:
I just found out today that actually lg v30 can support miui 10 by using treble.
If anyone interested please take a look at how to flash treble and vendor partition by @SGCMarkus thumb up for him
This thread is created for people who are not sure what is treble supported.
You can find ton of diffrent port rom.
Follow his guide
https://forum.xda-developers.com/lg-v30/how-to/guide-how-to-repartition-vendor-how-to-t3789787
Attach screen shot is prove I flash it to my lg v30 and working well with lte yes wifi yes Bluetooth yes everything.
After you done repartition go to this link you can find tons of rom there
https://forum.xda-developers.com/project-treble/trebleenabled-device-development
Edit : the info at my screenshot write snapdragon 6++ is just for display but I'm still running 835
@Saxithon comments ? has anything changed meanwhile ?
What is still broken ?
zacharias.maladroit said:
@Saxithon comments ? has anything changed meanwhile ?
What is still broken ?
Click to expand...
Click to collapse
As what I notice only when sliding the brightness the screen flicker and read mode/night mode is unuseable
darkidz555 said:
As what I notice only when sliding the brightness the screen flicker and read mode/night mode is unuseable
Click to expand...
Click to collapse
So it's still there, thx for that,
there supposedly there were also issues with sound and other bits I can't currently remember,
thus asking Saxithon who wrote about that before
miui10
good find man im running its nice.
They got some fix about brightness slider and sound crackling in their telegram group and they posted h2os rom as well join their telegram group and they currently port Samsung TouchWiz from note 8.
Have a look
darkidz555 said:
I just found out today that actually lg v30 can support miui 10 by using treble.
If anyone interested please take a look at how to flash treble and vendor partition by @SGCMarkus thumb up for him
This thread is created for people who are not sure what is treble supported.
You can find ton of diffrent port rom.
Follow his guide
https://forum.xda-developers.com/lg-v30/how-to/guide-how-to-repartition-vendor-how-to-t3789787
Attach screen shot is prove I flash it to my lg v30 and working well with lte yes wifi yes Bluetooth yes everything.
After you done repartition go to this link you can find tons of rom there
https://forum.xda-developers.com/project-treble/trebleenabled-device-development
Edit : the info at my screenshot write snapdragon 6++ is just for display but I'm still running 835
Click to expand...
Click to collapse
I'm trying this tonight.. I finally was able to create a working vendor partition with a flashable zip.. The guide refuse to work for me.. I tried everything from every page in the repartition thread.. I kept getting error 7 failed to mount system.. I'll share to people struggling with the PC method.. The zip can add or remove vendor partition from twrp.. It ask if you want to use system or data partition to create vendor.. And you can make it 512mb or 800mb.. I used data partition to create and 800mb just in case and it worked.. System failed to mount and install anything, every time from the repartition thread .. Or if I chose to repartition System in twrp zip, system failed to mount installing anything.. Thanks for sharing.. I appreciate you and others hard work.. I'm experimenting with easier methods of going from stock to GSI without PC..
lowkeyst4tus said:
I'm trying this tonight.. I finally was able to create a working vendor partition with a flashable zip.. The guide refuse to work for me.. I tried everything from every page in the repartition thread.. I kept getting error 7 failed to mount system.. I'll share to people struggling with the PC method.. The zip can add or remove vendor partition from twrp.. It ask if you want to use system or data partition to create vendor.. And you can make it 512mb or 800mb.. I used data partition to create and 800mb just in case and it worked.. System failed to mount and install anything, every time from the repartition thread .. Or if I chose to repartition System in twrp zip, system failed to mount installing anything.. Thanks for sharing.. I appreciate you and others hard work.. I'm experimenting with easier methods of going from stock to GSI without PC..
Click to expand...
Click to collapse
I had the same issues. Ended up having to lgup back to stock and root. Do you mind sharing where you found script or did yoi create it?
Who-Lep said:
I had the same issues. Ended up having to lgup back to stock and root. Do you mind sharing where you found script or did yoi create it?
Click to expand...
Click to collapse
Yes I'll share link.. I didn't create it.. I message the creator to get us a version that strictly repartition data.. I lost count how many times I started over trying to get a working vendor partition.. It's universal also.. Arm and arm64 only.. Read instructions before flashing.. https://forum.xda-developers.com/axon-7/development/tool-party-v0-1-vendor-partition-t3831517
good news. I wait for someone good to cook the Rom for good. maybe flash with twrp
lowkeyst4tus said:
Yes I'll share link.. I didn't create it.. I message the creator to get us a version that strictly repartition data.. I lost count how many times I started over trying to get a working vendor partition.. It's universal also.. Arm and arm64 only.. Read instructions before flashing.. https://forum.xda-developers.com/axon-7/development/tool-party-v0-1-vendor-partition-t3831517
Click to expand...
Click to collapse
Cool, thank you!
Edit: did you need to install the treble twrp?
Who-Lep said:
Cool, thank you!
Edit: did you need to install the treble twrp?
Click to expand...
Click to collapse
No.. Not to install.. But to use and format vendor you do.. I flashed a treble ROM last nite and it flashed perfectly.. The issue I had was with all the options it needs to be in front or behind system or vendor partition.. It ask you where to put it.. I got a 3rd option picking the wrong location for vendor.. Don't pick it! Use hardware keys to start over.. Even though it will mount and flash.. Twrp need it to be in front or behind system or data partition to boot.. It kept booting back to recovery for me.. Then when I try flashing party to remove vendor, I got a message that since vendor in the wrong location twrp can't reverse the process.. The only way to reverse it is with kdz or manually restoring gpt with repartition thread restore method.. I used that method to manually create the gpt backup..
lowkeyst4tus said:
No.. Not to install.. But to use and format vendor you do.. I flashed a treble ROM last nite and it flashed perfectly.. The issue I had was with all the options it needs to be in front or behind system or vendor partition.. It ask you where to put it.. I got a 3rd option picking the wrong location for vendor.. Don't pick it! Use hardware keys to start over.. Even though it will mount and flash.. Twrp need it to be in front or behind system or data partition to boot.. It kept booting back to recovery for me.. Then when I try flashing party to remove vendor, I got a message that since vendor in the wrong location twrp can't reverse the process.. The only way to reverse it is with kdz or manually restoring gpt with repartition thread restore method.. I used that method to manually create the gpt backup..
Click to expand...
Click to collapse
Thanks again, I will try tonight and said you used data partition?
Who-Lep said:
Thanks again, I will try tonight and said you used data partition?
Click to expand...
Click to collapse
Correct.. I made it 800mb.. It will ask if you want 512mb or 800mb..
---------- Post added at 10:32 PM ---------- Previous post was at 09:53 PM ----------
Who-Lep said:
Thanks again, I will try tonight and said you used data partition?
Click to expand...
Click to collapse
Make sure to flash compatible treble ROM before GSI.. I dont want to find out what happens if I flash GSI without treble ROM.. I've had several softbricks with other stuff..
lowkeyst4tus said:
Correct.. I made it 800mb.. It will ask if you want 512mb or 800mb..
---------- Post added at 10:32 PM ---------- Previous post was at 09:53 PM ----------
Make sure to flash compatible treble ROM before GSI.. I dont want to find out what happens if I flash GSI without treble ROM.. I've had several softbricks with other stuff..
Click to expand...
Click to collapse
Same here, thanks for the heads up. I think the only available treble rom would be the Los 15.1.
I'm looking to install Miui. Did you get the rom from the link that you posted?
What camera app are you using?
Installed a gsi rom on Ls998 (LG V30+) converted to us998, created vendor partion, flashed treble twrp, flashed trebelized Los 15.1. went over to the GSI rom section of link provided on first page, chose the rom I wanted (Pixel dust pie), extracted the .Img from xz, flashed the .Img successfully and booted, got a couple UI crashes and rebooted, it wouldn't boot after that, tried several times to boot into GSI but it just hung at the boot animation. Is this normal? (I've since then went into twrp and flashed trebelized Los again)
LG V30 Sprint LS998-30A ROMHi!
This Rom is 99% Stock. Most recent TWRP should first be installed. Then you can install this Rom and have Oreo with working TWRP.
This zip is created from the original KDZ.. It is made by me flashing my back to factory zip to lose TWRP and root and taking the OTA and then using lgup to dump all the partitions and then making a flashable zip. It contains almost the complete 30A firmware, but the partition table rewriting part and recovery image is removed. I changed the system.img, so you do not have to reinstall TWRP (recovery-from-boot.p deleted) when ROM is booted. I also changed the partition size of system.img, so the vendorized people can install this too without having problems because of a too small system partition. This is a continuation of westwood24's idea and work, I've updated it to the newest fw version and edited / advanced it a bit. I followed his idea and made this for users who can not take OTA's because they have Custom Recovery / Root installed.
Features
[*]Stock build made from official KDZ
Made from me taking OTA and dumping Partitions
Stock Build.prop (only 2 extra lines added for DTS, full weather lockscreen)
[*]Unrooted
Latest Canary Magisk Pre-installed (19.4 -087b451e (19308))
system.img modified to keep TWRP
System image size shrunk for being able to flash this on a smaller system partition, mainly caused by vendorizing
Removed dm-verity
Removed rctd (LG's root checker tool daemon)
Enabled opt-encrypt, it's your choice now if you want to encrypt your phone, it's no more forced. TWRP now is capable of decryption (both AOSP and stock) since a few versions
Installation
What you need
Unlocked Bootloader [How to do]
Working TWRP installed (should be installed already, otherwise you wouldn't need this zip )[Link to newest unofficial TWRP]
[*]When you need Root, Latest Magisk [Download]
No Longer Needed on 30a
NOTES
Starting with 30a
Please make a full twrp backup in case anything goes wrong. if after installing you lose your texts or your launcher changes back to the default stock launcher or some other weird bug like that, restoring just your DATA backup will fix it. If after flashing 30a you experience random reboots immediately after booting, DO NOT worry. This same thing happened to me and i believe that its just finishing the update with sprint. When this happened to me, I could see the Finishing Update notification in the pull down. My device rebooted about 3 times and in some cases became extremely laggy and i had to force reboot by holding vol up and power button . After the 3rd boot everything settled down and became stable and no reboots since.
LATEST ZIP
john-fawkes.com LS99830a.zip [Click to Download]
OLDER ZIPS
AFH ZIPS [Download]
How to install
When you are still on Nougat,
you should start fresh: Reboot to recovery using button combo or reboot app (needs root; btw, Magisk offers this possibility too: Menu -> Modules -> three dot menu top right - Reboot to recovery)
Then flash this TWRP.img via image flashing function in TWRP, reboot to recovery again (for fully working new recovery) and do a backup, then copy this backup to your PC.
Then initiate a factory reset. Wipe your system partition too in TWRP advanced wiping menu, copy the 30A firmware zip to your SD and install it. Reboot and enjoy
From Oreo:
For clean install: Factory reset and wipe system
You can also keep your data by simply dirty flashing the zip. *Be aware that problems may occur, maybe you need to do a factory reset to start fresh*
Flash the 30A zip, then Magisk zip when you need root, then reboot to System = you're DONE
P.S.: could be, that you first need to boot up your fresh install and set it up before you can flash magisk.No Longer Needed on 30a. Just Flash 30a Zip.
At the first time you boot to system, it can be TWRP says No OS installed. You can ignore it.
If TWRP asks if you want to install SU, hit no (in newest TWRP SU is disabled, and the option to install the TWRP app is disabled too.)
Rom Version
Android Version: 8.0 Oreo
Android security patch level: 2019-08-1
Don´t forget to hit the thanks-button if you like this zip! :good:
You want to help me with a [donation?] Not asking for it, I have fun doing this for you, but feel free...
Now this is what I like to see right here.bout to leave havoc in start flashing this asap I miss stock anyways thanks @JohnFawkes
Deandre7452 said:
Now this is what I like to see right here.bout to leave havoc in start flashing this asap I miss stock anyways thanks @JohnFawkes
Click to expand...
Click to collapse
Your welcome lol. Took me forever to do this. Had to backup and then wipe data then flash factoryls998 zip from sprint thread, then take Ota, the use lgup to dump all partitions then kdz to us99820e to root again then create flashable zip. I've tested it and it boots just fine
I can add this to WTF instructions tonight -- to join the Verizon and AT&T stock firmware TWRP-FLASHABLE zips already listed.
Thanks for you, @seadersn and @david.542569 efforts in making the North America stock firmware TWRP-FLASHABLE zip ROMs.
JohnFawkes said:
Your welcome lol. Took me forever to do this. Had to backup and then wipe data then flash factoryls998 zip from sprint thread, then take Ota, the use lgup to dump all partitions then kdz to us99820e to root again then create flashable zip. I've tested it and it boots just fine
Click to expand...
Click to collapse
Damn my brother you went through the struggle ? do not remind me, because I went through some before flashing stocks and roms with converting.
---------- Post added at 07:21 PM ---------- Previous post was at 07:19 PM ----------
ChazzMatt said:
I can add this to WTF instructions tonight -- to join the Verizon and AT&T stock firmware TWRP-FLASHABLE zips already listed.
Thanks for you, @seadersn and @david.542569 efforts in making the North America stock firmware TWRP-FLASHABLE zip ROMs.
Click to expand...
Click to collapse
Chazz I see you have a lot of update to do
ChazzMatt said:
I can add this to WTF instructions tonight -- to join the Verizon and AT&T stock firmware TWRP-FLASHABLE zips already listed.
Thanks for you, @seadersn and @david.542569 efforts in making the North America stock firmware TWRP-FLASHABLE zip ROMs.
Click to expand...
Click to collapse
Sounds good :good: btw if anyone hears about us998 kdz updates please let me know. That's next on the list. While I'm waiting on that I'm going to finish the magisk module for @Whiskeyomega audio mod. Got permission from him to not only turn it into a Magisk module but im using xmlstarlet to do it. Xmlstarlet is a xml parser. It allows on the fly editing of xml files. This will allow the device to keep its original mixer_paths xml and my module just add the modifications in. This is extremely useful since whisky and myself both have seen LG deploy multiple mixer paths xmls. Why? No idea. Every regions mixer_paths is different. Not by much. But in my head patching is ALWAYS better than replacing :good::good:
@mattgyver please delete the 2 posts
JohnFawkes said:
@mattgyver please delete the 2 posts
Click to expand...
Click to collapse
:crying: This place is the Krypton to my Superman. I have no power here. I'm just a regular user in "this neck of the woods". You'll need to report the posts so the mods for the LG forums see them to delete them. Really, though, replacing content of the posts with "deleted" has the same effect.
Thanks man!
I have been having too many weird problems on my 21A and was about to do a wipe and clean flash of that one from back in May, and wasn't looking forward to it. I've been using the same system partition for probably 3 months without resetting anything.
I'm excited now that I can flash an updated version instead, now! Ill try it in the next 2-3 days and let you know if anything feels odd (I don't suspect that since you say it's about 100% stock).
Thanks again for your work, and taking the time to upload a TWTP flashable version :good:
.
Sent from my LG-LS998 using XDA Labs
Thanks! Looking forward to flashing this.. haven't flashed anything since 21A... You think dirty flash is ok??
Lurien said:
Thanks! Looking forward to flashing this.. haven't flashed anything since 21A... You think dirty flash is ok??
Click to expand...
Click to collapse
should be yes
Ive been running it over a full day now, debloated and tweaked a bit. RCS and VoLTE is working after ##72786# and a PRL and profile update.
I don't have any obvious issues, thanks again!
Sent from my LG-LS998 using XDA Labs
syndre said:
Ive been running it over a full day now, debloated and tweaked a bit. RCS and VoLTE is working after ##72786# and a PRL and profile update.
I don't have any obvious issues, thanks again!
Click to expand...
Click to collapse
Dirty flash?
Lurien said:
Dirty flash?
Click to expand...
Click to collapse
I did a clean flash and restored my apps from google (first boot up) and then used titanium backup to restore app data for the ones that needed it.
syndre said:
I did a clean flash and restored my apps from google (first boot up) and then used titanium backup to restore app data for the ones that needed it.
Click to expand...
Click to collapse
Thank for the reply. May I ask what rom you were running? Thanks..
Lurien said:
Thank for the reply. May I ask what rom you were running? Thanks..
Click to expand...
Click to collapse
Before this one I was using the stock Sprint 21A ROM that @JWnSC shared in his US998 to LS998 guide here.
I never could get an AOSP ROM to work the way I wanted on a LG V-series phone, even though I still try every 2-3 months, going back probably 4 years. Especially now that Sprint has RCS and VoLTE activated on their Network, I don't see an AOSP ROM on this device working with those two things functioning any time soon, if ever. That and the DAC not being perfect are the reasons I'm still on stock LG.
I wouldn't ever recommend an LG V-phone to anyone on Sprint who plans on using it as a daily driver with AOSP. Those LTE features will probably never be supported.
.
syndre said:
Before this one I was using the stock Sprint 21A ROM that @JWnSC shared in his US998 to LS998 guide here.
I never could get an AOSP ROM to work the way I wanted on a LG V-series phone, even though I still try every 2-3 months, going back probably 4 years. Especially now that Sprint has RCS and VoLTE activated on their Network, I don't see an AOSP ROM on this device working with those two things functioning any time soon, if ever. That and the DAC not being perfect are the reasons I'm still on stock LG.
I wouldn't ever recommend an LG V-phone to anyone on Sprint who plans on using it as a daily driver with AOSP. Those LTE features will probably never be supported.
.
Click to expand...
Click to collapse
Thanks for the reply. I'm also running that same 21A ROM.. I figured a dirty flash would be ok,.. according to the OP dirty flash should be fine.. will try in the next few days.. As far as AOSP ROMS I've stayed away from them after reading about all those issues.. I've never been a huge fan of AOSP ROMS but in the the past I've tried them out on other phones just to flash and try something new...
I have not seen any mention of this yet, but I would like to mention the fact that that most of the major LG stock apps have updates to them on apkmirror. Camera, QMemo, LGHealth, LGBackup, FMRadio, SmartWorld, Gallery3D v7.0 and a few others.
I install these apks then use LP to integrate them into /system . You must put magisk into core only mode when you integrate the updates into the ROM, otherwise you'll just get errors like "not enough space on target".
I actually made TWRP flashable zips for all these updated apps so that you can just flash them in recovery and not worry about having to "integrate" anything. If there's enough interest in these zips from others, I can upload them to a cloud somewhere and share them with everyone.
.
Sent from my LG-LS998 using XDA Labs
Compared to 21a, is this worth the risk? Does it have a new radio? Could someone post their baseband?
---------- Post added at 10:29 PM ---------- Previous post was at 09:50 PM ----------
I seem to have lost LTE on a dirty flash ... Is there something else I have to do with the Sprint modem? Baseband is Def different
Perhaps I am just getting bad LTE reception today, but I am only getting 3g...odd
islandfever said:
Compared to 21a, is this worth the risk? Does it have a new radio? Could someone post their baseband?
---------- Post added at 10:29 PM ---------- Previous post was at 09:50 PM ----------
I seem to have lost LTE on a dirty flash ... Is there something else I have to do with the Sprint modem? Baseband is Def different
Perhaps I am just getting bad LTE reception today, but I am only getting 3g...odd
Click to expand...
Click to collapse
I've been running this for a little over a week now and I dirty flashed between us998 20e ls998 21a and this 26a and I've had lte with all 3 the entire time. Haven't switched to 3g once
Hello !!!
Gsi Rom for realme Q
This is the best version for realme Q.Works well, but fingerprint error, hope someone can fix it
Installation Instructions:
1. Download the GSI from the links above, and uncompress it.
2. Wipe Data, Dalvik, and Cache,system . No wipe vendor
3. Remove Magisk if it was previously installed, by using its uninstaller script. Magisk files are stored in the kernel image, and in the /data/adb folder, which are left untouched when wiping data and flashing the GSI. Another option is to flash your stock rom and manually delete the content of the /data/adb folder.
4. Flash the GSI to system partition (AB devices : flashing a vbmeta.img file for your device may also be required).
5. Boot and perform a factory reset.
6. (Optional) Reboot and flash Magisk, and maybe additional files.
7. Reboot and Enjoy.
If you want to update rom, you can also always try to dirty flash, i.e. wipe Dalvik and Cache (not Data) and flash System image. But if you experience a strange behavior, a clean flash may be required
Note : if flash Gapps you need resize system in teamwin,then flash gapps
Which vendor to use?
1. Always use your actual device's vendor
2. Always use OEM unmodified vendor, not some custom vendor
3. This includes boot.img. boot.img and vendor MUST BE the same version.
Rom download :
Link download android 9 rr7.0 : https://drive.google.com/file/d/1--pQfJlNR2V9OEFeLCoT--tmftT8OFGZ/view?usp=drivesdk
link download android 10 AOSP : Download
Link download Rom Msm 9 : Download
How to fix bug any rom:
Link download fix lag,fix bt audio,fix mtp,fix power rom havoc,magisk stable for android Q and more ..
Folder click here
Great, found your thread on telegram, this is what I need, I am fed up with Color OS
It's not half bad but there are two major problems with the ROM. First it seems it can't read exfat 128 GB as card which is a shame for I won't format it to inferior fat32 to lose all my stuff. Second, whenever I set a screen lock, no matter what kind of it'll tell me that I entered incorrect code. Means I cannot lock the screen with any kind of security measure. I could solve the external as card issue by flashing lineage os boot.img but I couldn't the screen lock issue. Aside these I have no problem. Testing other gsi ROMs.
Edit.: No. Screen lock isn't rom but vendor issue. I accidentally wiped vendor partition before flashing the image.
greenys' said:
It's not half bad but there are two major problems with the ROM. First it seems it can't read exfat 128 GB as card which is a shame for I won't format it to inferior fat32 to lose all my stuff. Second, whenever I set a screen lock, no matter what kind of it'll tell me that I entered incorrect code. Means I cannot lock the screen with any kind of security measure. I could solve the external as card issue by flashing lineage os boot.img but I couldn't the screen lock issue. Aside these I have no problem. Testing other gsi ROMs.
Edit.: No. Screen lock isn't rom but vendor issue. I accidentally wiped vendor partikon before flashing the image.
Click to expand...
Click to collapse
I will note that people do not wipe vendor
29y6145 said:
I will note that people do not wipe vendor
Click to expand...
Click to collapse
I just noticed that I didn't wipe vendor either. It's not even in the wipeable section if you try advanced wipe. For some reason if I go from one gsi to another lock screen password/pattern will not work. I have to flash stock zip first, then wipe data, system, cache, davlik and at last flash gsi image. Between going from one gsi to another you have to do this in order to keep lock screen password function. Right now I'm struggling with Magisk Safetynet. Any good method to bypass?
greenys' said:
I just noticed that I didn't wipe vendor either. It's not even in the wipeable section if you try advanced wipe. For some reason if I go from one gsi to another lock screen password/pattern will not work. I have to flash stock zip first, then wipe data, system, cache, davlik and at last flash gsi image. Between going from one gsi to another you have to do this in order to keep lock screen password function. Right now I'm struggling with Magisk Safetynet. Any good method to bypass?
Click to expand...
Click to collapse
I realized that. Today I tested android Q on realme Q, it worked. I cannot set the screen password, the system only allows swiping. I am looking into this problem.
29y6145 said:
I realized that. Today I tested android Q on realme Q, it worked. I cannot set the screen password, the system only allows swiping. I am looking into this problem.
Click to expand...
Click to collapse
Flashing stock vendor img solved the issue on my device. Although I tried AOSP Pie not Q.
update android 10 and permissiver for andoid 10
Update Installation Instructions .
Hi, awesome thread, congrats to you @29y6145.
I see now that you added two more ROMs, the AOSP10 and the MSM-Xtended 9. Any of them are more stable than the others? I was looking for stability in the entire OS and Camera that any other thing.
By the way, Why you remove the links to TWRP and Permissiver_v5?
I installed the Resurrection Remix 7.0.2 and see that doesn't have Magisk by default. I should install Magisk via your TWRP built-in Magisk installer or from the official Magisk website?
Tmv_Josue said:
Hi, awesome thread, congrats to you @29y6145.
I see now that you added two more ROMs, the AOSP10 and the MSM-Xtended 9. Any of them are more stable than the others? I was looking for stability in the entire OS and Camera that any other thing.
By the way, Why you remove the links to TWRP and Permissiver_v5?
I installed the Resurrection Remix 7.0.2 and see that doesn't have Magisk by default. I should install Magisk via your TWRP built-in Magisk installer or from the official Magisk website?
Click to expand...
Click to collapse
I am editing some posts, and will re upload important files.
Both of the 2 Roms you speak are fine. I will give you a tutorial about the Havoc rom.
I have upload permissiver #1
29y6145 said:
I am editing some posts, and will re upload important files.
Both of the 2 Roms you speak are fine. I will give you a tutorial about the Havoc rom.
I have upload permissiver #1
Click to expand...
Click to collapse
Did you manage to pass safetynet with gsi?
greenys' said:
Did you manage to pass safetynet with gsi?
Click to expand...
Click to collapse
You try
@29y6145
This Petnoire's_SafetyNet_Spoofer_magisk.zip should be used instead of the Realme5ProColorOSMagiskFixBETA.zip?
Or both should be flashed?
Tmv_Josue said:
@29y6145
This Petnoire's_SafetyNet_Spoofer_magisk.zip should be used instead of the Realme5ProColorOSMagiskFixBETA.zip?
Or both should be flashed?
Click to expand...
Click to collapse
You use Petnoire's_SafetyNet_Spoofer_magisk or module safeynet in magisk .
Im use module safety in magisk It works perfectly.
@29y6145
What is exactly the name of that Magisk's Safety module that you mentioned?
I searched in Magisk and only found hackintosh5's SafetyPatch and Didgeridoohan's MagiskHide Props Config.
Is any of them?
My realme Q device has unlocked BL and installed TWRP, while using lineage oS 16 Android P, how to refresh this Android Q GSI image? Is it refreshed directly with TWRP REC?
@TrancyMeng.
*Any ROM in IMG format should be flashed trought Fatboot, but you need to wipe the other installation first, in adb run this to enter in TWRP:
adb reboot recovery
Then in TWRP:
*Wipe > System, Data, Cache, Dalvik
*Reboot > BootLoader (Fastboot)
Then in Fastboot/Bootloader run this command:
fastboot flash system romNAME.img
Reboot to recovery/TWRP and flash:
Permissiver_v5.zip
After refresh the Andrews Q GSI ROM, why the speaker will have a current sound, and call and play the local media file will not. How to troubleshise the patch to do it? Can you trouble with you to provide a patch for the repair sound?
THREAD CLOSED!
@29y6145 Please consult the inbox of your private messages.