Has anyone found one that works with 3T? I just received my TruSheild Ultra Clear and it's a joke. I need to find another one that actually fits.
ghettopops said:
Has anyone found one that works with 3T? I just received my TruSheild Ultra Clear and it's a joke. I need to find another one that actually fits.
Click to expand...
Click to collapse
OnePlus 3 / OnePlus 3T Screen Protectors, TWIN PACK of Orzly 2.5D Pro-Fit V2 Tempered Glass Screen Protector for Original 2016 Model Oneplus THREE & OnePlus 3T Version - Transparent with BLACK Rim https://www.amazon.co.uk/dp/B01LWOYYYZ/ref=cm_sw_r_cp_apa_VRjpybVYKVJ8M
Watched a few videos on this one to see if cases interfere with the edges but they dont.
LMcR92 said:
OnePlus 3 / OnePlus 3T Screen Protectors, TWIN PACK of Orzly 2.5D Pro-Fit V2 Tempered Glass Screen Protector for Original 2016 Model Oneplus THREE & OnePlus 3T Version - Transparent with BLACK Rim https://www.amazon.co.uk/dp/B01LWOYYYZ/ref=cm_sw_r_cp_apa_VRjpybVYKVJ8M
Watched a few videos on this one to see if cases interfere with the edges but they dont.
Click to expand...
Click to collapse
Ordered from American Amazon lol. Thanks for the heads up. Think I saw this one before but was weirded out by the blacked out top and bottom. Just want a decent Protector.
I have a similar protector to that orzley, black rim too, but sports a different brand.
It's what it you think, glass surface, covers the front of the phone, leaves just enough for a case. The only problem or non problem depending on how you look at it, is if you line up the home button with the top speaker and front camera, then it partially covers up the navigation buttons, and completely covers up the notification LED. I typically have these turned off anyway, but it bothers me a little that the cutouts aren't exact. If someone can tell me they are, then I'll buy me some as well.
Let us know how the orzly v2 protector is like, as I have heard it's the best out there for 3/3t
Orzly v2. Great screen protector. You can see the diference!
I got the one from OnePlus.
justibasa said:
I got the one from OnePlus.
Click to expand...
Click to collapse
Buddy got the OnePlus Tempered and it looks worse than mine for sizing.
I agree I ordered one from one plus thinking they would have the right fit and finish, well I was wrong have a 2mm gap on both sides.... Smh way to go one plus
Sent from my ONEPLUS A3000 using Tapatalk
pamposmouskos said:
Orzly v2. Great screen protector. You can see the diference!
Click to expand...
Click to collapse
In a lot of revies people mention a rainbow effect with the v2, because the glue is only on the side of the tempered glass.
Do you have that issue as well?
No. The only think is the dot matrix in direct sunlight but i can leave with that
Have found the exact same problem from a few manufacturers.
Here is a quick image of one that I took, I believe this is an iTec 9H.
Not sure if you can see but it is laid over the top of the one that comes on the 1+3T as default.
hxxps://drive.google.com/file/d/0B0tJilDJmoKXWUtndllyTmpXVEU/view?usp=sharing
Can anyone confirm if the Orzly v2 will fit/play nice with a Rhinoshield bumper?
I'm using the Orzly v2. It's the closest you will get to a perfect full screen tempered glass with no lift when using a case or changing cases. Yes it has dot matrix in certain angles, and the rainbow effect is very minimal. It's a lot better than the other ones I tried.
@charlieb620 Thanks, just received mine today. I can confirm that the fit is most excellent on phone and works well with Ringke Fusion Clear. I will also say that the rainbow effect is present and most visible with screen off. It is basically where I would swipe when browsing and swiping up and down(right side centerish) Seems like its a patch of Glass not sticking and swirls when I press down on it.
Am I the only one who hates screen protectors, which don't stick entirely?
It makes the screen look really really bad. Is there no screen protector, which doesn't have black bars, has epoxy all around and doesn't feature huge gaps on the sides?
To delete, tk
pamposmouskos said:
Orzly v2. Great screen protector. You can see the diference!
Click to expand...
Click to collapse
Does it have a dot matrix and rainbow effect?
Whats the side profile like?
I have a protector that looks similar, however somehow dust has managed to find itself under the screen, well after it was perfectly applied. I was a fool to remove the protector that came standard with the 3T
Orzly v2
Pro
Excellent cut
Look nice
Con
Matrix Screen off
Screen is brigh when off
Stick only on edges
I just realized this.
I bought a cheap tempered glass online only to found out that it was 1mm smaller than the display. This would be really awkward to have two lines (of that glass) on your display when the screen turned on. I complained to the seller about it but he didn't reply to me yet.
Then I bought a new one which perfectly fit the size of the display. I know it won't be full size because of the phone glass curvature. After installing it, the all 4 sides of the glass edge didn't stick. Although it wasn't very visible when the screen turned on, but I worry that some dust will get in there.
Now I know that the curve of the phone glass starts at 2mm inside of the display. So getting a glass protector smaller than the screen size will give you an annoying vertical physical lines, getting a glass that fit the display will give you a halo effect because the edge didn't stick.
I do have a standard plastic screen protector, but I haven't use that yet. I hope that one doesn't give me nightmares.
Use 2.5d tempered glass.
I've been using a case and glass screen protector (they actually arrived before my phablet) for a while now and really like both.
The case is titled "Xiaomi Mi MAX 2 Case Cover 6.44 inch hard Plastic Cases untra thin Protective Shell Back Cover", and that's it's accurate -- I don't think it provides any protection at all on the front. It's also only notched in three corners rather than all four, but it's the thinnest case I've ever used. I quite like it; the power button is also textured. (Here for $5.)
The screen protector ("LEPHEE Xiaomi Mi Max 2 Tempered Glass Film") is a slightly more mixed bag; the customer service is very nice and polite and offered to ship me a replacement, but they shipped the wrong one. Still, the quality is excellent; I haven't used a glass screen protector before, but I was impressed at how easily it went on compared to plastic ones. (Here for $3.)
I attached a few pictures of the phablet with one or the other or both if anyone's interested. My Mi Max 2 is black, and so is the case, but the screen protector is trimmed in a gold color -- I kind of like the look, though I'd still prefer black.
Are there any issues with rainbow effects on the screen protector? I have another full screen protector which has problems with such in the middle of the screen.
I haven't noticed any, but I'm no sure -- normally I have plastic protectors, which seem very different.
They also did ship me a replacement in black, and it works great.
3DD said:
Are there any issues with rainbow effects on the screen protector? I have another full screen protector which has problems with such in the middle of the screen.
Click to expand...
Click to collapse
agreed. i removed mine for the same reason. very annoying and gave a cheap grey tint to screen while off.
ldrn said:
I've been using a case and glass screen protector (they actually arrived before my phablet) for a while now and really like both.
The case is titled "Xiaomi Mi MAX 2 Case Cover 6.44 inch hard Plastic Cases untra thin Protective Shell Back Cover", and that's it's accurate -- I don't think it provides any protection at all on the front. It's also only notched in three corners rather than all four, but it's the thinnest case I've ever used. I quite like it; the power button is also textured. (Here for $5.)
The screen protector ("LEPHEE Xiaomi Mi Max 2 Tempered Glass Film") is a slightly more mixed bag; the customer service is very nice and polite and offered to ship me a replacement, but they shipped the wrong one. Still, the quality is excellent; I haven't used a glass screen protector before, but I was impressed at how easily it went on compared to plastic ones. (Here for $3.)
I attached a few pictures of the phablet with one or the other or both if anyone's interested. My Mi Max 2 is black, and so is the case, but the screen protector is trimmed in a gold color -- I kind of like the look, though I'd still prefer black.
Click to expand...
Click to collapse
I have this cover, this back cover is so good
i guess this better than from other back covers
i suggest to everyone
Hi Guys.. any suggestions for the best full tempered glass available at ASIA or Aliexpress? been having a hard time choosing which one that has adhesive at the middle and responsive, and most compatible on any cases
look for 5D and similar names,
Im using this
https://es.aliexpress.com/item/Gert...para-Xiao-mi-A1-6-5x-para-el/32848554909.html
The only one Ive found with full adhesive mid, no annoying dots, glass feeling and nice curved edges (still a little gap in the joints getting dirt but with a case it looks like there is the original phone)
i uploaded some pics in another post if you want to check
Althoufh needs some care during attachment, this one fits really perfectly:
Luanke Ultra-thin Durable Tempered Glass for Xiaomi Mi A1 - BLACK https://gearbest.app.link/AIiyFztEJM
The surface of my new Mi Max 3 is much less "slippery" than the screen on my Mi MIX so I became curious whether it uses the same Gorilla glass as the MIX. However, when I search, I notice that none of the specs given for the Mi Max 3 on any web site say what type of screen glass it uses. Tradingshenzhen sent me a screen protector with the phone, but I've never used a screen protector before. I actually find the screen surface on the Mi Max 3 to be a bit 'sticky' and so I'm considering using the screen protector.
I would like to make an informed decision, however, so if anyone knows what type of glass is on the Mi Max 3, and whether it has an oleophobic and or scratch resistant coating, could you please let me know?
Thanks.