Related
So i just received my Spigen SGP Anti-fingerprint ultra fine screen protector and Skinomi DryTech HTC One X Skin protector today.
For those thinking of getting both or either one of these, here are my first impression...
I'm returning the Skinomi DryTech, doesn't fit right. The cutout for the rear 5-pin and speaker holes doesn't fit properly. It covers one of the gold pins and part of the speaker holes. The camera cutout a bit too big. Maybe i'm just too fussy, but i'm so used to BestSkinsEver type of fit, very minimal gaps and very close precise fit. Guess i'll have to wait for BSE to come out with HOX skins. I've given up on Invisibleshield ever since they added Zagg to their name, quality just wasn't the same.
Next, Spigen SGP Anti-Fingerprint Ultra fine Screen Protector Steinheil enhanced optical hard coated film. It doesn't cover the whole screen just the middle flat part. Although i'm not really happy with the fit, i'm keeping them until i find a better alternative.
I'll try post some pics, but the only camera i have now is the HOX camera..
update (12th May 2012):
Received the replacement full body skin from Skinomi, fits better but still not aligned 100% so they sending me another replacement.
Decide to try the Skinomi's DryTech Screen protector that came with the full body kit.. it fits to the edges of the curved surface, slightly rubbery feel, but not as bad as other skins i've tried. few micro bubbles right after installation, seems like the bubbles slowly disappearing. Will try it out a few weeks and update my views.
I don't think we'll ever find a traditional type of screen protector to cover the screen 100% because of the curvature of the edges. Best coverage would be from a flexible wet application screen protector ala BSE or IS. Downside would be the sticky orange peel texture.
I also received my SGP Ultra Fine Screen Protector today. I'm not opening it or keeping it. It has a matte appearance which isn't for me. I'll have to sell it on eBay or something. How much should I ask for?
scotty2012 said:
I also received my SGP Ultra Fine Screen Protector today. I'm not opening it or keeping it. It has a matte appearance which isn't for me. I'll have to sell it on eBay or something. How much should I ask for?
Click to expand...
Click to collapse
I think u can return them for a full refund if u haven't opened it.
I'm thinking of getting Seidio Ultimate Screen Guard - Fingerprint Reducing and HD.
http://www.seidioonline.com/htc-one-x-fingerprint-reducing-and-hd-screen-guard-p/spm3htnxl-2.htm
According to the product description:
- Covers the front face of your device, including the screen and the proximity sensor with cut-outs for the home button, speaker and camera
I've listed it on eBay here
cyben76 said:
I'm returning the Skinomi DryTech, doesn't fit right. The cutout for the rear 5-pin and speaker holes doesn't fit properly. It covers one of the gold pins and part of the speaker holes. The camera cutout a bit too big. Maybe i'm just too fussy, but i'm so used to BestSkinsEver type of fit, very minimal gaps and very close precise fit. Guess i'll have to wait for BSE to come out with HOX skins. I've given up on Invisibleshield ever since they added Zagg to their name, quality just wasn't the same.
Click to expand...
Click to collapse
I think Skinomi has acknowleged that some of their screen protectors don't fit the back see here:
http://forum.xda-developers.com/showpost.php?p=25267093&postcount=97
Apparantly after emailing them, Azzatar has been sent a replacement that should fit better. I'd try that.
digitalallstar said:
I don't think we'll ever find a traditional type of screen protector to cover the screen 100% because of the curvature of the edges. Best coverage would be from a flexible wet application screen protector ala BSE or IS. Downside would be the sticky orange peel texture.
Click to expand...
Click to collapse
^^this
only a wet applicating one is gonna cover close to 100% of the screen
Just to add the SGP doesn't even cover 100% of the flat part. Top to bottom acceptable, though there is a slight gap of about 1mm. Side coverage it only covers the part of the screen where the LCD is, with about 8mm gap, 4mm on each side before the glass starts to curve.
Hard to prove my point when i can't take a pic...
cyben76 said:
Just to add the SGP doesn't even cover 100% of the flat part. Top to bottom acceptable, though there is a slight gap of about 1mm. Side coverage it only covers the part of the screen where the LCD is, with about 8mm gap, 4mm on each side before the glass starts to curve.
Hard to prove my point when i can't take a pic...
Click to expand...
Click to collapse
I think it's less noticeable if the protector dimensions are perfectly aligned with the LCD, the edge disappears when the phone is on, but very obvious when the phone is off. My wife has a Optimus 2X, which has a even wider curved bezel, and the screen protector is sized exactly to the display also.
I agree with the others that hard screen protectors won't fit to the edge of glass, unless they come pre-molded to the screen curvature, and this might not be possible with this type of material.
Anyone tried these guys:
http://www.ebay.co.uk/sch/i.html?_n...ll+body&_osacat=0&_trksid=p3286.c0.m270.l1313
Those who wish to see the problem i have with Skinomi Drytech Skin can check this thread:
http://forum.xda-developers.com/showthread.php?t=1622123
Apparently same prob with Zagg InvisibleShield, i don't have a camera other then that on my HOX so i use other people pics... hhehe
Spigen faq page for the screen protectors
Why is the HTC One X Steinheil Series cut smaller than the display size?
Due to the curved screen of the HTC One X, dry application films cannot adhere to curved edges. Over time, the edges will bubble and attract dust and lint which will ultimately make the screen protector unusable. Cutting the screen protector to fit the maximum display area that is not curved ensures that the screen protector will protect your device's display longer without bubbling.
expertzero1 said:
Spigen faq page for the screen protectors
Why is the HTC One X Steinheil Series cut smaller than the display size?
Due to the curved screen of the HTC One X, dry application films cannot adhere to curved edges. Over time, the edges will bubble and attract dust and lint which will ultimately make the screen protector unusable. Cutting the screen protector to fit the maximum display area that is not curved ensures that the screen protector will protect your device's display longer without bubbling.
Click to expand...
Click to collapse
yup, but never expected it to cover such a small surface area. Thought it would at least cover till the edge just before the curve surface starts.
Sent from my HTC One X using XDA
cyben76 said:
yup, but never expected it to cover such a small surface area. Thought it would at least cover till the edge just before the curve surface starts.
Sent from my HTC One X using XDA
Click to expand...
Click to collapse
+1
This is exactly what I have found with screen protectors that I have bought from eBay. They are far too narrow and am quite sure that making them wider would not adversely effect it.
It seems that there is a 'single manufacturing standard size' template, which then the majority of companies have adopted to base their One X screen protectors on.
I had SGP screen protector, it only covered the visible part of the screen. I ordered Skinomi DryTech at the same time, but the full body skin did not fit well. I used the SGP got about 2 weeks, then just today decided to installs the Skinomi DryTech screen protector, it fits the screen right to the edges. It feels slightly rubbery, but not as bad some of the previous ones I had, the orange peel is not that obvious. Just fresh instal there are a few micro bubbles, I'll wait few days and see how it .
As for the Skinomi full body skin, I'm still waiting for a 2nd replacement, the first replacement did not fit that good as well.
Sent from my HTC One X using XDA
Guys did any anybody try the original htc screen protector?
http://www.handtec.co.uk/product.php/6535/htc-one-x-screen-protector---2-piece--sp-p730-
Remember reading up on the original screen protector, it does not cover the whole screen and people were saying it was similar quality to the cheapo £3 ones from ebay.
I'm looking for a new screen protector for my 3T. Here's my requirements:
Tempered glass
Doesn't let dust get under it over time
Doesn't keep me from seeing pixels along the edges (rules out OnePlus 3/3T Curved Tempered Glass Screen Protector; see https://youtu.be/rVtWOmDrVGU?t=119)
Covers up the entire display area (rules out OnePlus 3/3T Tempered Glass Screen Protector; see my attached photo)
Works with at least one of the big protective cases like Otterbox Case for OnePlus 3/3T, Spigen Neo Hybrid OnePlus 3 Case / OnePlus 3T Case with Flexible Inner Protection and Reinforced Hard Bumper Frame for OnePlus 3 2016 - Gunmetal, or OnePlus 3T / OnePlus 3 Case, TUDIA Slim-Fit HEAVY DUTY [MERGE] EXTREME Protection / Rugged but Slim Dual Layer Case for OnePlus 3T, OnePlus 3 (Matte Black)
Are there any screen protectors that meet all of these criteria?
the unicorn..gl
Doesn't exist.. that I've seen.
Sigh... Why did OnePlus have to curve the screen? :crying:
Yeah,there's no good tempered glass protector. The only option is a plastic protector.
B3501 said:
Yeah,there's no good tempered glass protector. The only option is a plastic protector.
Click to expand...
Click to collapse
Yeah, it's looking that way. I really don't want to go that route because plastic has next to no impact protection.
I have the Orzly tempered glass protector, no issues here... Recommend it
dsdavis6 said:
I have the Orzly tempered glass protector, no issues here... Recommend it
Click to expand...
Click to collapse
It comes off eventually,you get the rainbow effect and dust eventually gets underneath it as it only sticks to the edges.
I bought a couple of cheap ones off eBay that go around the home button and speaker. Don't even notice it's on most of the time. I get a little oil spill type effect but that's only when the screens off and not noticeable unless I look for it. Think the key is getting it really stuck down. When I first put it on I ended up with tobacco underneath it from my pocket but carefully took it off and reapplied it and so far it's been fine. Had it on about 2 months maybe 6 weeks and it's been great
I'm having the same issue as you. I'm not sure which tempered glass screen protector to use..
After a little search, it seems like the issue with the official curved screen protector from OnePlus has been fixed. I'm gonna bite the bullet and just go for that once, since it's "official". Will report back with images.
exb0 said:
After a little search, it seems like the issue with the official curved screen protector from OnePlus has been fixed.
Click to expand...
Click to collapse
Where'd you see that? I'm under the impression that they said they were going to fix it, but all they ended up doing was adding a disclaimer about the problem to the description page.
Hey everyone,
I bought the curved tempered glass and it was so so so bad I removed it 1 minute after using it.
When you put your finger on the fingerprint sensor, I get the feeling that i'm putting my finger into a hole.
The feeling I get when I look at the screen, its the same as if my phone was outside a window...
It was expensive and I'm not using it. Tried to refund it and the support didnt allowed it.
The curved tempered glass does protect the whole phone into a point that it kills the whole feeling you get when
the phone is naked.
Please do not buy it!
I bought recently the normal tempered glass but I still didnt received it.
When it arrives I'll give some news.
I received these today and applied the first one perfectly. I can't tell there is anything on the screen. They do not attract smudges anymore than the phone's glass which is good.
I am more so trying to protect against micro scratches so do not necessarily need the better protection of glass.
OnePlus 3 / OnePlus 3T Screen Protectors, Multi-Pack of 5 Orzly Transparent Screen Guards Sheets for the ONE PLUS THREE SmartPhone (Original 2016 Mode https://www.amazon.com/dp/B01H7BTSM0/ref=cm_sw_r_cp_apap_8PbcRUUQS3tVw
Sent from my ONEPLUS A3000 using Tapatalk
Using the orzly v2 glass and its cool. Yes you can see the dot matrix in direct sunlight, yes you get random rainbow in in hot/humid places. But overall its usually clear and perfect. If you use a case it just blends in and although the extra height is daunting on the home button at first, after a month I can say I can't even tell anymore, not obtrusive at all.
Experience with official tempered glass protector
So just to share my experience with the official curved tempered glass protector from oneplus after using it for some weeks.
I'm using it with the Otterbox case and it does work well together overall. It did happen very rarely that an edge was pushed off by the case when the phone was in my pocket. The visibility of the edges of the screen is impaired, but not to the point that I find it disturbing in every day usage.
So my point is, overall this combination works well and provides good protection while adding reasonable bulk. I think it's a very solid choice as of now.
dsdavis6 said:
I have the Orzly tempered glass protector, no issues here... Recommend it
Click to expand...
Click to collapse
Yup, quite happy with that. But I'm not 100% persuaded that's actually tempered glass. I managed to get it chipped just by holding it in my pocket with some coins (I assume, as I never dropped it). Nothing major, but never happened with any other glass screen protector before. So, guess that's still going to provide some level of protection but wouldn't trust it too much for major protection.
Apart from that, that's ok for the price.
IMHO
Has anyone tried:
https://www.ultimateshield.co.uk/collections/oneplus-3t-3
SlyUK said:
Has anyone tried:
https://www.ultimateshield.co.uk/collections/oneplus-3t-3
Click to expand...
Click to collapse
It seems to have the same problem as the official OnePlus full-coverage protector where you lose some edge pixels, according to the 3-star review on the white model.
I'm on my 2nd Orzly V2 now and it's not too bad. I have limited rainbow affect which is only visible under fluorescent lights and the touch sensitivity is generally OK. It's not great by any means but it's adequate, will protect the screen and is the best out of a poor lot.
Make by my self based on polyurethane film
Since there is only a thread for the Nillkin cases and tempered glass I thought it would be nice to have some thread for the accessories in general.
Until this day I tried 3 cases, two screen protectors (films) and two tempered glass protectors.
Case No. 1 ) Slim, silicone case http://www.ebay.com/itm/Transparent-Clear-Silicone-Slim-Gel-Case-For-Huawei-Honor-9/112446352466?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m2749.l2649 - Very slim and light case made from nice silicone BUT the protection when dropped would be none. It's not made 100% precisely and since it's silicone it doesn't look any good on the back where it creates bubbles. I've ordered this as the first case to have at least some protection. Nice thing is they include free screen protector but the quality isn't very good - doesn't cover the whole display (I'm not talking about edge-to-edge) and there are 2mm gaps on each side and when the display is on it looks terrible. 2/5
Case No. 2) Nillkin Super Frosted http://www.ebay.com/itm/For-HUAWEI-Honor-9-NILLKIN-Super-Frosted-Shield-Hard-Plastic-Back-Covers-Cases-/152596952252?var=&hash=item23877cb4bc:m:mtNLCAV-KRHaAK2TUOYLPTg - very nice case, really sturdy BUT I have few complaints - it's kinda slippery on the sides but this will go away after some use maybe and the bottom side around jack, charging port and speaker is a bit sharp and if you're holding the phone with the little finger on the bottom it't not really comfortable. Besides that it's really nice case for the price but I expected a bit more. But once again for the price it's more than OK. 4/5
Case No. 3) TPU Shockproof case with "carbon" http://www.ebay.com/itm/Luxury-Carbon-Fiber-Slim-Shockproof-Soft-TPU-Back-Case-For-Huawei-Honor-9-Magic/112325496837?ssPageName=STRK%3AMEBIDX%3AIT&var=412748326145&_trksid=p2060353.m2749.l2649 - as you can imagine, there is absolutely no carbon at all, just some kind of "sticker" or what it is. Nevermind, this case is the best of the three. Really nice case made from TPU, sturdy, should have the best drop protection and fits just perfectly. There is a small "rim" around the screen that should protect the screen from scratches when the phone is "face down". 5/5
Screen protector (film) No. 1) Nillkin Super Clear Protective Film - in terms of size the best screen protector I've had. Obviously it's not edge-to-edge but it does cover the whole display with gaps on the edges BUT the display is fully protected so thumbs up for me. In terms of "anti-fingerprint" it's nowhere close to the display or the back but is much better than some noname protector I've got with TPU case. Overall very nice screen protector for free but I'm still waiting for the Nillkin H+ tempered glass and some noname edge-to-edge tempered glass. 4/5
Tempered glass No. 1) Edge-to-edge blue 2.5D tempered glass http://www.ebay.com/itm/9H-2-5D-Full-Cover-Real-Tempered-Glass-Screen-Protective-Film-For-Huawei-honor-9/152593109357?ssPageName=STRK%3AMEBIDX%3AIT&var=452016649496&_trksid=p2060353.m2749.l2649 - really nice tempered glass (2 pcs) for the price. It has the adhesive only on the top, bottom and the sides but the application was very easy and the glass holds on even with any of tested cases. It has some "dots" in the screen area so I got no rainbow effect whatsoever. The blue color is a bit different from the original color od the phone but it's not a problem since you have your phone in a case. Overall for the price pretty good. 4/5
Tempered glass No. 2) Normal tempered glass Caliber (bought in CZE) - not edge-to-edge, doesn't cover the whole screen, gaps on the sides. Overall sh*t. 1/5
Still waiting for the Nillkin H+ tempered glass.
Nilkin Amazing H+ Pro is No Go
Got the 0.2mm H+ Pro. It's cover the display area for like 99%, with-out just about 0.5mm on each side, after all still the best.
BUT. The silicon layer doesn't hold the tempered glass on both sides, looks like the phone display curve started a bit earlier than its needed for the protector.
It doesn't stick to the display, making it looks like ****, with 3mm frame from each side. Top/bottom sides stick OK, all the way to edges.
So Nilkin Amazing H+ Pro is No Go for me.
Well, got it yesterday so I'm still waiting to try it but not sure if wan't to :laugh:
cases
sooooo, I bought these from tvc mall. They were so cheap that I bought three different ones with the intent of disposing of whichever were poor. Thing is, they are all good in their own way. The plain bumper is just very slimline. The rugged looking one is cool as it has a stand in landscape mode, and the wallet is exceptional quality, given the price. All three fit perfectly, but the plain bumper makes the power and volume buttons so much more tactile. The rugged one looks really cheap in silver, perhaps black would have been a good choice. As i wasn't expecting much from the wallet one, I also oredered the nilkin wallet but that hasn't arrived yet.
https://www.tvc-mall.com/details/dr...r-9-auspicious-dragon-black-sku10174840d.html
https://www.tvc-mall.com/details/fo...casing-with-kickstand-black-sku10174919a.html
https://www.tvc-mall.com/details/ma...ot-for-huawei-honor-9-black-sku10175044a.html
https://www.tvc-mall.com/details/ni...se-for-huawei-honor-9-black-sku10174916a.html
I have also ordered the ultimate sheild screen protector, which is edge to edge, in black as I think it will make an excellent contrast to the silver rear of the handset....which wont be visible when the (absolutely necessary) bumper is fitted!
Ultimate sheild screen protector
.... And the ultimate sheild protector turned up. It is excellent. A word of caution, unless this is fitted absolutely perfectly, it will render one or both of the capacitance keys inoperable. This happened to me as i fitted the sheild a fraction of a millimetre to the right. I carefully removed and replaced it with more accuracy.
Here is a pic of the black sheild fitted to my silver H9, and a photo of the plain bumper fitted from my previous post. Svelt but rugged!
After a couple of hours of use I can say that there has been no loss of sensitivity on the screen or capacitive buttons, but on darker details and the blacks, it does look like the screen is behind a sheet of glass. You will know what i mean if you have used a screen protector which bonds over its entirety, whereas this one has a mild adhesive at the top and bottom of the protector, where the bezels are. A small price to pay i think to protect my new device. It is mostly noticeable in bright light, not so much in low light. And I love the new black look of the bezels with the silver fingerprint sensor still visible.
Right, so, some more hours on....the ultimate sheild has begun to show its flaws. Towards the middle of the screen there is now what i can only describe as a "woodgrain" effect. This could be caused by tiny amounts of moisture getting between the screen and protector, which I guess there is nothing to stop that happening. They offered a refund for dissatisfaction so I guess I will be chasing that up. Pfffft. So disappointed.....
Is there a smart cover for it ?!
Just bought the TPU Shockproof case and it is amazing! It's a very good quality and it doesn't makes the phone feel like a toy.
I really like it and definitely recommend it!
NotoriousNick said:
Just bought the TPU Shockproof case and it is amazing! It's a very good quality and it doesn't makes the phone feel like a toy.
I really like it and definitely recommend it!
Click to expand...
Click to collapse
Can you upload a photo of the phone with the case applied?! That would be awesome
The nilkin "sparkle series" wallet turned up. Its awful. Unlike the cheap wallet I purchased, which remains closed under magnetism, the nilkin just falls open and feels poorer quality.
The Ipaky bumper with the clear perspex back is, however, very nice. The only caveat, it sits flush with the screen so offers no protection if you decide to place your device screen down.
I'm waiting for the smart cover case, if it didn't come fast, I'll go with a skin.
I have bought an honor 9 few days ago. Somebody could suggest me a screen protector that cover whole display? With 3D display is so difficult find a good screen protector....
danygold95 said:
I have bought an honor 9 few days ago. Somebody could suggest me a screen protector that cover whole display? With 3D display is so difficult find a good screen protector....
Click to expand...
Click to collapse
Here you go
https://www.ultimateshield.co.uk/collections/honor-9
PalakMi said:
Here you go
https://www.ultimateshield.co.uk/collections/honor-9
Click to expand...
Click to collapse
Thanks.
I don't like this type of tempered glass (i know that is the only solution for cover 3d display without space).
So, someone has tested "invisible film screen protector"?
danygold95 said:
Thanks.
I don't like this type of tempered glass (i know that is the only solution for cover 3d display without space).
So, someone has tested "invisible film screen protector"?
Click to expand...
Click to collapse
I didn't test, I will try it once I get my honor 9
PalakMi said:
I didn't test, I will try it once I get my honor 9
Click to expand...
Click to collapse
:good:
If someone else has tried this protective film, please give us a feedback.
Did someone try the Mofi screen protector? According to a review on Aliexpress it has minimal space at both sides.
I've seen ones from ultimate shield, I'm considering getting one.
PalakMi said:
I've seen ones from ultimate shield, I'm considering getting one.
Click to expand...
Click to collapse
Good luck with that. Did you read my earlier post? As the protector does not actually sit on the screen, due to the adhesive around the edges, it is susceptible to the "rainbow effect" which i think is caused by humidity between screen and protector. It seemed to manifest itself after the phone had been in my pocket and warmed up. I don't have an overly sweaty crotch.....
Anyhow, they apologised and promptly sent a replacement and the same happened again.
By all means give it a go and they will refund you without issue.
1) Most screen protectors do not fit the view 20. The description might claim it fits View 20 and Nova 4 but in reality it will not. Most do not include the cut-out for sensor and camera, and do not cover the screen fully. To be sure the protector fits, get Olixar tempered glass, which is specifically made for Honor View 20. It's more pricey, but well worth the money.
2) Do not buy hard plastic covers for the device. View 20 is full-glass phone and hard plastic covers provide no real protection to it. Get a soft TPU one.
3) Camera lens protection is also recommended, as the lenses touch the surface you place it on, and also very easily scratch. You can get one from amazon for 10 dollars.
4) In a nutshell, there are a ton of accessories available that are supposedly usable for View 20 but in fact aren't. And most importantly, this phone is super prone to scratches so please protect it all around.
You don't need a screen protector, as the View 20 comes with one pre-applied. The phone also comes with a soft plastic case in the box, which when used raises the lens of the camera off the surface.
All the points you've made seem to be totally covered by the items you get straight out of the phone's box.
Flobbity said:
You don't need a screen protector, as the View 20 comes with one pre-applied. The phone also comes with a soft plastic case in the box, which when used raises the lens of the camera off the surface.
All the points you've made seem to be totally covered by the items you get straight out of the phone's box.
Click to expand...
Click to collapse
First of all, the Global Model does not include a case.
Second, the screen protector is incredibly thin and made of soft plastic. It provides very little cover at all. Third, when you put your phone in your pocket, the camera glass will scratch.
I bought the olixar screen protector. Like the one I bought previously there is no cut out for the camera, even though it was shown in the ad on Amazon
Sent from my PCT-L29 using Tapatalk
I have a Mofi screen protector. It is fantastic at preventing fingerprints. It is, indeed a hard, tempered glass screen protector. It is edged in black, which matches up to the phone's small bezels. There is also a small black circle around the camera notch. I'm happy with it, especially comparing it to the smudgy, original plastic screen protector that came on the phone.
As far as cases go, I've also gotta hand it to Mofi - perfect fit and prefer the fabric cases. I cannot stand the fingerprint prone clear cases. I tried another one, in addition to the one that came with the phone, and I just cannot do it.
I usually got Spigen cases for my phones and Whitestone Dome glass, but since this is a flat screen, there will be no Whitestone this time.
I mean, I don't miss it too much because it's really, really expensive. But I do need a good alternative now with this phone.
What screen protector did you guys buy, and which of them worked great? I want to have FULL coverage with good adhesion.
Casewise, well, just post whatever works great.
Ps.: Glass wise I found Nillkin has a few on their website, but I have my doubts.
I got the Nillkin case and glass, quality-wise quite good
and ordered this as a backup .mytrendyphone.eu/shop/full-cover-xiaomi-mi-10t-pro-5g-tempered-glass-screen-protector-261932p.html
LightSmok said:
I got the Nillkin case and glass, quality-wise quite good
and ordered this as a backup .mytrendyphone.eu/shop/full-cover-xiaomi-mi-10t-pro-5g-tempered-glass-screen-protector-261932p.html
Click to expand...
Click to collapse
Thank you, placing my order. I hate how the stock case wont even protect the camera 'hump' lmao. Got some time though, have a week until unlock is done.
I ordered a Nillkin Amazing H+PRO. Have that one on my Mi Mix 2S so went with it again.
I don't plan to buy any case since I actually like the one that comes with the phone.
Seems to me that the Xiaomi cover is slightly higher than the camera so when you have it on the table the camera is not touching the table so perhaps it does protect the camera a little bit but I am not sure.
I regret buying a screen protector, should have just let the pre applied factory film be on the phone. When I installed the screen protector there was a white dot inside a air bubble which was annoying so I removed the protector and removed that white dot but then when I put the protector back on there was more bubbles and a black dot appeared in the middle of the screen so I ended up buying a new tempered glass protector but from a different brand. So disappointed because when I applied it to my Mi Mix 2S it was perfect, no bubbles or anything.