Can't install Samsung pay on Galaxy watch - Samsung Galaxy Watch

I got Galaxy watch in Germany and I am trying to enable Samsung pay on it but I had no success with it.
What I've managed to discover is that Samsung pay on galaxy watch for Germany is not installed and I think I should change the region to do it but I can't do that either. I have followed instructions from this thread:
"https://forum.xda-developers.com/smartwatch/gear-sport/changing-region-samsung-gear-sport-r600-t3771324"
But I can't even connect to my watch.
Can somebody please help? Samsung pay on my watch is one of the main reasons I have the smart watch and I would really like to make it work.

I have exactly the same problem. The previous ways of changing the region are not valid for this device.

Had the exact same issue : struggled for 1 hour trying to connect without any success...
For me the problem was my wifi AP : I disconnected both my laptop and my Galaxy Watch from my home wifi then connected to my AndroidAP instead... and suddendly voilààààààà ! I got connection working and the rest worked like a charm.
(Galaxy Watch 42mm)

MikeGyver said:
Had the exact same issue : struggled for 1 hour trying to connect without any success...
For me the problem was my wifi AP : I disconnected both my laptop and my Galaxy Watch from my home wifi then connected to my AndroidAP instead... and suddendly voilààààààà ! I got connection working and the rest worked like a charm.
(Galaxy Watch 42mm)
Click to expand...
Click to collapse
Can you send me the procedure that you have used, please.
And let me know if you have followed it to the letter or you've done something different.

Me too...in Germany it can't work

Related

[Q] iPega Wireless Bluetooth 3.0 Controller Help needed

Hello,
I am struggling to get the iPega Wireless Bluetooth 3.0 controller working on my emulators. I can pair the device through the Nibiru software which comes with it and it will play the games which you can get via google store. However if i try to pair the device via bluetooth without the nibiru software running it sees it but once you click on the device all i get is to enter a pin code, then it goes to incorrect password or pin and then the pairing fails. I have tried this on my galalxy note one and my girlfriends Galaxy Ace 2. There is no where to enter a pin on the phone and obviously not on the joystick side. What am I doing wrong been at it for 3 days now, going mad. Will someone talk me through the procedure step by step, any help appreciated.
http://forum.xda-developers.com/showthread.php?t=2033780&page=51
spellcaster1972 said:
Hello,
I am struggling to get the iPega Wireless Bluetooth 3.0 controller working on my emulators. I can pair the device through the Nibiru software which comes with it and it will play the games which you can get via google store. However if i try to pair the device via bluetooth without the nibiru software running it sees it but once you click on the device all i get is to enter a pin code, then it goes to incorrect password or pin and then the pairing fails. I have tried this on my galalxy note one and my girlfriends Galaxy Ace 2. There is no where to enter a pin on the phone and obviously not on the joystick side. What am I doing wrong been at it for 3 days now, going mad. Will someone talk me through the procedure step by step, any help appreciated.
Click to expand...
Click to collapse
I can also only use the ipega with nibiru. Very frustrating to when seeing all the YouTube videos explaining how well it works without it....
I have found this thread that might help. I will let you know of it works for me

Note 8 not conecting via Wifi with other pcs

Hello everyboddy,
I dont know the correct name of this tecnology, but i will be succinct. I use ES File Explorer(app) to see videos im my other tablets direct from my computer and this always works very smoth, fast and perfect with my other 3 tablets (2 Asus and 1 Acer) and one Smartphone(Sony). This week i bought a Note 8 wifi and nothing works, but only with Note 8. ES File Explorer cannot play (only access) PC stuff, I tried Samsung Link and it cannot do anything too. From my large number of attempts, what i realized is the wifi conection direct through Note 8 and PC works only for few seconds or kbits.
The same action works great with my other tablets. I only can understand there is something diferent with Note 8 that is not allowing me to conect direct through wifi.
The folders shared is protected with password, but I removed password and not work. Again, the exact same steps works fine with my other 4 Androids but not with Note 8.
Ps. Direct conection via wifi with pc have much higher transference rate, that why its best than any other.
Can someone help me? Why Note 8 is diferent? I can explain anything too. Thanks in advance,
#duplicate post

Connecting to Note 3 via bluetooth

I seem to have a problem connecting my new 10.5" tab s to my Verizon note 3 via bluetooth. It shows that they are paired but when I click connect it acts like it will connect for about 3 seconds (it says connecting...) then just goes back to saying paired. The dude at the Samsung display in Best Buy claimed these 2 devices simply cannot connect through bluetooth which didn't seem right. Tonights?
What I've tried so far: obviously restarting both devices and completely unpairing them as well to no avail...
AndroidFTW11 said:
I seem to have a problem connecting my new 10.5" tab s to my Verizon note 3 via bluetooth. It shows that they are paired but when I click connect it acts like it will connect for about 3 seconds (it says connecting...) then just goes back to saying paired. The dude at the Samsung display in Best Buy claimed these 2 devices simply cannot connect through bluetooth which didn't seem right. Tonights?
What I've tried so far: obviously restarting both devices and completely unpairing them as well to no avail...
Click to expand...
Click to collapse
It isn't right. I have a Note 3 also but with Sprint. I don't have any problem connecting. I would assume it is not the carrier that is causing the problem. It is well known that the Samsung reps at BB know absolutely nothing about their products. I also assume you tried shutting BT off on both devices then re-activating them? Is NFC on on your note? If it is try shutting that off as the slate is not NFC capable and it may be interfering. Just some suggestions.
I have a Note 3 as well from sprint and haven't had an issue connecting via bluetooth. I'll take a look around to see if anyone else is having this issue. Hopefully you'll be able to resolve it.
I did a factory wipe on my phone thinking that may help but was unsuccessful. Those of you who are able to connect your phone and tab, can you use the Internet connection from the phone using bt on the tab?
Update number 2...I factory wiped the tablet too and still no luck. It automatically wants to connect for Internet access and if I have the tab connectrd to WiFi it says it can't connect to bluetooth for tethering if WiFi is connected. Turning off WiFi does nothing...
I have the ATT Note 3 and am able to connect to my Tab S with Bluetooth. On both devices it only says paired. The only time it said connecting is when I initially paired the two devices, once paired the "connecting" was replaced by "paired". I can't find anywhere it says connected yet I am able to send files back and forth between the two via Bluetooth. I don't use Bluetooth to tether so not sure if that is where it's supposed to say connected. Sorry if we're talking about two different things, just trying to help.
Sent from my SM-T800 using Tapatalk
Well I feel stupid now haha. I can't connect to use Bluetooth for an Internet connection as I was attempting, but I can send and receive files to and from the tab and phone.

[Q] Connection Issues

I am having problems keeping the watch connected to my phone. Android Wear will report it's connecting... then disconnect very quickly. It will repeat this cycle over and over. On the watch, it shows a little cloud icon with a slash thru it, pulling up Google Now reports the watch is disconnected.
My phone reports it is paired with the watch via bluetooth and the radio is turned on. I tried changing my wifi access to use my 5G radio instead of 2.4 but that didn't help. No other bluetooth devices are paired with my phone or with my watch. Phone is a Galaxy Note 2 running Android 4.4.2. Any suggestions that I can try?
I have this as well with my GS4.
are you having this issue when the phone is near you or like say across the house from you?
I got my watch yesterday.
Problem occured with out of the box firmware (4.4.4). I manage to reconnect and connect last enough to update to 5.0.2. ANd there I was hoping it will be good. But unfrontunately no. I still have the problem.
I have a galaxy note 4 (N910F) on Lollipop. I reset factory my phone and the watch. I have stil random disconnections. And when disconnected, It is hard to made the watch reconnect. Didn't have any problem with my LH watch R.
Kind of disappointed by the Moto 360 (a colleague with a one plus one and the same watch doesn't have such problems.
Really don't know mess things up.
What a burden to have to reset the watch each time we need to connect to a new mobile / reconnect to the current one.
They should have add an option to connect / disconnect

[Q] screen mirroring not working, hardware problem?

Hello everyone, I just bought a Samsung smart tv with screen mirroring feature and my note 4, my wife old note tablet connects with no problems, but my note 10.1 2014 edition gives me "unable to connect because of an hardware problem" message. I am not rooted, I have the U.S wifi edition. patch did not help either.
does anybody have a solution please. going crazy. spent arm and a leg for a smart Samsung TV and can not do a simple task.
Have same problem connecting to Sony cinema system. S4 connects with screen mirrowing but note note 2014 with same Android version gives connecting error. If I find solution I will let you know.
Sent from my SM-P600 using Tapatalk
Also having Mirroring issues
I also have a Samsung Galaxy Note 10.1 (2014 Edition) that is having issues with mirroring. I have an older TV and purchased a Netgear Push2TV device PTV3000 for wireless mirroring. When I try to connect to the Netgear device the Tablet usually fails to connect and displays the "unable to connect because of a hardware problem". I have been able to get it to connect, however, if I reboot the tablet, but if you disconnect and try to reconnect it will display the same error message.
Even if you do get it to connect it will drop out like clockwork about every 3-5 minutes. I tried to stream a movie to it and locked up every 3-5 minutes all the way through over and over. The movie will just freeze and then the tablet It will display something like "lost connection to the server " and you can report or reconnect. It will reconnect and start back where it left off, but quit again in 3-5 minutes. Very frustrating for a brand new 600 dollar device.
This is most likely a software problem if you don't have any trouble with your wifi connection.
I do not have any reason to believe my WIFI has any issues. I can stream the movie to the Samsung Tablet without any problem, it's only when I try to use the mirroring that problems occur. Also, I was able to mirror using the exact same setup with an android phone I had laying around that's about 3 years old and was able to 1) connect to the Push2TV much more readily 2) stream the movie without it locking up every 3-5 minutes.
I just bought a brand new Samsung smart TV 7250 series. Exact same problem. P600, US, totally stock. Not even root.
Sent from my XT1060 using Tapatalk
mikejj24 said:
I also have a Samsung Galaxy Note 10.1 (2014 Edition) that is having issues with mirroring. I have an older TV and purchased a Netgear Push2TV device PTV3000 for wireless mirroring. When I try to connect to the Netgear device the Tablet usually fails to connect and displays the "unable to connect because of a hardware problem". I have been able to get it to connect, however, if I reboot the tablet, but if you disconnect and try to reconnect it will display the same error message.
Even if you do get it to connect it will drop out like clockwork about every 3-5 minutes. I tried to stream a movie to it and locked up every 3-5 minutes all the way through over and over. The movie will just freeze and then the tablet It will display something like "lost connection to the server " and you can report or reconnect. It will reconnect and start back where it left off, but quit again in 3-5 minutes. Very frustrating for a brand new 600 dollar device.
Click to expand...
Click to collapse
I just got the ptv3000, updated the firmware, and can connect no problems, except for the fact that it only mirrors a corner of my screen (only 1080p out of 1600p of the tab). I just can't figure out what to do. Yet I also saw that others had got it working. Why is it difficult with this tab.
scarlettwings said:
I just got the ptv3000, updated the firmware, and can connect no problems, except for the fact that it only mirrors a corner of my screen (only 1080p out of 1600p of the tab). I just can't figure out what to do. Yet I also saw that others had got it working. Why is it difficult with this tab.
Click to expand...
Click to collapse
So you got that working except the resolution issue right? To help others can you please share info of your device?
Which version of the tablet? (4g, 3g or wifi)
Rooted or not?
Stock or custom rom?
SM-P601 cihazımdan Tapatalk kullanılarak gönderildi
Samsung Tablet unable to screen share ...FIXED
mikejj24 said:
I also have a Samsung Galaxy Note 10.1 (2014 Edition) that is having issues with mirroring. I have an older TV and purchased a Netgear Push2TV device PTV3000 for wireless mirroring. When I try to connect to the Netgear device the Tablet usually fails to connect and displays the "unable to connect because of a hardware problem". I have been able to get it to connect, however, if I reboot the tablet, but if you disconnect and try to reconnect it will display the same error message.
Even if you do get it to connect it will drop out like clockwork about every 3-5 minutes. I tried to stream a movie to it and locked up every 3-5 minutes all the way through over and over. The movie will just freeze and then the tablet It will display something like "lost connection to the server " and you can report or reconnect. It will reconnect and start back where it left off, but quit again in 3-5 minutes. Very frustrating for a brand new 600 dollar device.
Click to expand...
Click to collapse
Hi There, No need to worry. Please read below the fix.
Alright, here is the Fix for this. Please spread the word if this works for you. Because it worked for me. I didn't discover this solution so I can't take credit for this. Here it goes:
1. On your Note Pro/Tab Pro find All Share Cast from Samsung and UnInstall all the updates. Then click Force Close, all of this should be done in Application Manager.
2. Restart your Note Pro/Tab Pro (Very Important)
3. Using two fingers pull down the main screen from top down to unveil the controls menu. Touch Screen Sharing while the Miracast or other screen sharing service (Wifi Direct etc) is activated on Your TV.
4. Let it auto find it and auto connect..........Viola!
uncensoredtr said:
So you got that working except the resolution issue right? To help others can you please share info of your device?
Which version of the tablet? (4g, 3g or wifi)
Rooted or not?
Stock or custom rom?
SM-P601 cihazımdan Tapatalk kullanılarak gönderildi
Click to expand...
Click to collapse
Hi, I have the P605 with 4G, unrooted and on stock 4.3.
imagine cars said:
Hello everyone, I just bought a Samsung smart tv with screen mirroring feature and my note 4, my wife old note tablet connects with no problems, but my note 10.1 2014 edition gives me "unable to connect because of an hardware problem" message. I am not rooted, I have the U.S wifi edition. patch did not help either.
does anybody have a solution please. going crazy. spent arm and a leg for a smart Samsung TV and can not do a simple task.
Click to expand...
Click to collapse
Hi try this.delete all share cast dongle s/w update version which is 1.2.3717 uninstall this.maybe it will help.i have the same problem on my note 3 N9000 non rooted device.if it help you please let me know.
Have p600 WiFi and tried fix and got same result. I select device, tries to connect, and returns can't connect after awhile.
Sent from my SM-P600 using Tapatalk
So I contacted Samsung customer support regarding this problem.
The first contact, they required me to do a factory reset, so in order to go any farther, I did that.
Once that was done, and the problem still existed, even before doing any updates or anything, I contacted Samsung Support again.
This time, they told me that I would have to send it in for repair at my expense (because mine is out of warranty; which pisses me off, because it was less than 3 weeks out of warranty.) Mind you, they never could tell me what the cost would be.
So apparently, I'm just not going to be able to screen cast from my SAMSUNG tablet to my SAMSUNG TV... even though screencasting from my Moto X works perfectly fine...
I do have squaretrade, but I'm not sure I want to claim that warranty just because of some screen mirroring not working...
Screen Mirroring Issue FIXED!!
Enzymaticracer said:
So I contacted Samsung customer support regarding this problem.
The first contact, they required me to do a factory reset, so in order to go any farther, I did that.
Once that was done, and the problem still existed, even before doing any updates or anything, I contacted Samsung Support again.
This time, they told me that I would have to send it in for repair at my expense (because mine is out of warranty; which pisses me off, because it was less than 3 weeks out of warranty.) Mind you, they never could tell me what the cost would be.
So apparently, I'm just not going to be able to screen cast from my SAMSUNG tablet to my SAMSUNG TV... even though screencasting from my Moto X works perfectly fine...
I do have squaretrade, but I'm not sure I want to claim that warranty just because of some screen mirroring not working...
Click to expand...
Click to collapse
Please read my response on the previous page.
chief10rules said:
Please read my response on the previous page.
Click to expand...
Click to collapse
The instructions didn't help chief. My tablet doesn't even have all share cast installed. Thanks for the idea though.
Enzymaticracer said:
The instructions didn't help chief. My tablet doesn't even have all share cast installed. Thanks for the idea though.
Click to expand...
Click to collapse
stock rom should have it. are you using a custom rom?
Nope, fully stock. Not even rooted. Is there some other name for it?
Sent from my XT1060 using Tapatalk
Enzymaticracer said:
Nope, fully stock. Not even rooted. Is there some other name for it?
Sent from my XT1060 using Tapatalk
Click to expand...
Click to collapse
That's strange. try flashing latest stock rom for your device via odin. You can download it from sammobile
SM-P601 cihazımdan Tapatalk kullanılarak gönderildi
If I had the time I'd be happy to try, but I need this tablet for work right now, and I finally just got everything set back up from when I had to factory reset over the weekend. Maybe when I have the time in the future.
Thanks
All Share Cast replaced by Samsung Link
chief10rules said:
Hi There, No need to worry. Please read below the fix.
Alright, here is the Fix for this. Please spread the word if this works for you. Because it worked for me. I didn't discover this solution so I can't take credit for this. Here it goes:
1. On your Note Pro/Tab Pro find All Share Cast from Samsung and UnInstall all the updates. Then click Force Close, all of this should be done in Application Manager.
2. Restart your Note Pro/Tab Pro (Very Important)
3. Using two fingers pull down the main screen from top down to unveil the controls menu. Touch Screen Sharing while the Miracast or other screen sharing service (Wifi Direct etc) is activated on Your TV.
4. Let it auto find it and auto connect..........Viola!
Click to expand...
Click to collapse
All Share Cast has been replaced by Samsung Link. Screen Mirror works in Chromecast app on S5 and Note 10.1 (2014) but uses the network so has some lag. Screen Mirror works with Microsoft Display Adapter on S5 without network or lag but get the hardware error on stock Note 10.1 (2014). Tried the All Share Cast Patch and that did not work either. Still looking.

Categories

Resources