[ROM][OFFICIAL][gts4lvwifi][10] LineageOS 17.1 - Samsung Galaxy Tab S5e ROMs, Kernels, Recoveries,

[ROM][OFFICIAL][gts4lvwifi][10] LineageOS 17.1 - Samsung Galaxy Tab S5e ROMs, Kernels, Recoveries,

-- bit more friendly stock -> lineage instructions --
1. Unlock the bootloader
- Connect to WiFi network
- Enable OEM Unlock in developer options
- Turn off the tablet
- Boot to download mode manually by plugging in USB and holding all the buttons for few seconds
- Follow instructions on the screen
2. Connect to WiFi network and make sure OEM Unlock in developer options is still checked
3. Flash custom VBMeta image ( https://dl.twrp.me/gts4lvwifi/vbmeta.tar.html ) in Odin ( use AP slot )
4. After flashing VBMeta, boot to stock. It'll likely ask you to wipe data, if so do that
5. Connect to WiFi network and make sure OEM Unlock in developer options is still checked
6. Now you can flash TWRP ( https://dl.twrp.me/gts4lvwifi ) in Odin ( use AP slot once again ), for convenience you can hold volume up while flashing it so that you boot to recovery right after it's flashed
7. Install Lineage × whatever else you need ( gapps, addon-su, ... )
8. Format data
9. Reboot ( make sure to not install TWRP app when TWRP asks you to )
---
Also Odin download for those who can't find it on their own https://build.nethunter.com/samsung-tools/Odin_3.13.1.zip
( sha1sum 1057496afa34bfdf7e77caf0b99207dca77fcb2d )

Builds 20200824+ depend on Android 10 firmware, and thus from now on the recovery will abort the installation if you're still on Android 9 one.
You can update the firmware by flashing following Odin package: https://github.com/luk1337/gts4lv-fw/releases/tag/T720XXS2CUA3.
After the firmware update you should be able to flash newer builds.

Well.. that was faster than expected. Thank you very much for your dedication.
Which gapps are you currently using or recommending? Opengapps doesn't seem to have gapps for 10 yet.
Also any special instructions for flashing when coming from your previous los16 rom?

LuK1337 said:
LineageOS is a free, community built, aftermarket firmware distribution of Android 10, which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Instructions :
Download the latest build and gapps
Reboot to recovery
Flash the latest build and gapps
Reboot
Downloads :
Builds :
https://www.androidfilehost.com/?w=files&flid=299579
http://downloads.codefi.re/jdcteam/luk/lineage-17_0/gts4lvwifi
https://sourceforge.net/projects/luk-lineageos/files/gts4lvwifi/lineage-17.0
Reporting Bugs
DO NOT Report bugs if you're running a custom kernel or you installed Xposed
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
If it is a random reboot, grab /proc/last_kmsg. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
If the problem disappears after running "setenforce 0" from a root shell, grab /data/misc/audit/audit.log
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. Please also do not report known issues. Any bug not reported in the bug report format below may be ignored.
Code:
What is your--
LineageOS version:
LineageOS Download url:
Gapps version:
Did you--
wipe:
restore with titanium backup:
reboot after having the issue:
Are you using--
a task killer:
a non-stock kernel:
other modifications:
Provide any additional information (observations/frequency of problem/last version it worked on/etc) as needed:
XDA:DevDB Information
[ROM][UNOFFICIAL][gts4lvwifi][10] LineageOS 17.0, ROM for the Samsung Galaxy Tab S5e
Contributors
LuK1337
Source Code: https://github.com/LineageOS
ROM OS Version: Windows 8 Mobile
Version Information
Status: Testing
Created 2019-09-24
Last Updated 2019-09-24
Click to expand...
Click to collapse
Wow!!!! Thanks op!

andre0005 said:
Well.. that was faster than expected. Thank you very much for your dedication.
Which gapps are you currently using or recommending? Opengapps doesn't seem to have gapps for 10 yet.
Also any special instructions for flashing when coming from your previous los16 rom?
Click to expand...
Click to collapse
Apparently https://sourceforge.net/projects/opengapps/files/arm64/beta/ works.

I had the opportunity to test the image yesterday as kind of a preview. After killing the setup wizzard, it worked really great. The switch from LOS 16 to 17 was easy.
Rooting had to be done with magisk (current stable was fine) as Luk told me that superSU probably won't work.
I eventually reverted to LOS 16 mainly because of personal discomfort. No Trebuchet, some settings dialogues not (yet) ported and Titanium Backup did not work (there were no buttons displayed - could not even press the problems? button as it was not there ). I personally decided to wait a bit until I will return to LOS 17 on that device.

That was fast. You got me

inka$$o said:
I had the opportunity to test the image yesterday as kind of a preview. After killing the setup wizzard, it worked really great. The switch from LOS 16 to 17 was easy.
Rooting had to be done with magisk (current stable was fine) as Luk told me that superSU probably won't work.
I eventually reverted to LOS 16 mainly because of personal discomfort. No Trebuchet, some settings dialogues not (yet) ported and Titanium Backup did not work (there were no buttons displayed - could not even press the problems? button as it was not there ). I personally decided to wait a bit until I will return to LOS 17 on that device.
Click to expand...
Click to collapse
Did you perform a full wipe before flashing?
Also how did you 'kill' the setup wizard?

There is an issue with twrp decrypting storage on Los 17. Is this more than likely a twrp issue?
I also can't install apps, probably because no access to SD card.

suzook said:
There is an issue with twrp decrypting storage on Los 17. Is this more than likely a twrp issue?
Click to expand...
Click to collapse
TWRP issue.

LuK1337 said:
TWRP issue.
Click to expand...
Click to collapse
Apps won't install from play store also
Unfortunately I can't download anything, since SD card is encrypted. Guess I will go back to Los 16. Thanks anyway op.

suzook said:
Apps won't install from play store also
Unfortunately I can't download anything, since SD card is encrypted. Guess I will go back to Los 16. Thanks anyway op.
Click to expand...
Click to collapse
>Apps won't install from play store also
Format data; reboot and they should install fine now.

LuK1337 said:
>Apps won't install from play store also
Format data; reboot and they should install fine now.
Click to expand...
Click to collapse
Will give it a shot.

andre0005 said:
Did you perform a full wipe before flashing?
Also how did you 'kill' the setup wizard?
Click to expand...
Click to collapse
I started with my device running LOS16 already. If you're coming from stock, you should stick to the instructions for the LOS16 installation in the other thread - just use instead of LOS16 image the LOS17 image.
If you have already LOS16 on the device:
-> Boot to Recovery
-> install LOS 17 image
-> if desired stable Magisk for rooting
-> if desired these openGAPPS (was told to use them - they worked fine)
-> FORMAT data (wipe doesn't do the trick, as it doesn't do it when installing LOS 16)
After facing the problem with the setup wizzard I was told to simply delete it.
Boot to Recovery, mount system partition and open the terminal.
The command is:
rm -rf /system/priv-app/SetupWizard
After that, the wizard is gone and you can boot to system. You'll have to manually go through the settings to set up everything though.

Are there any launchers other than the included that work with the new gesture navigation?

andre0005 said:
Are there any launchers other than the included that work with the new gesture navigation?
Click to expand...
Click to collapse
No.

OK, got it set up properly with the format data. Just a couple things. Black theme doesn't work, and immersive mode force crashes settings app when trying to access it. Not complaining, just letting you know.

suzook said:
OK, got it set up properly with the format data. Just a couple things. Black theme doesn't work, and immersive mode force crashes settings app when trying to access it. Not complaining, just letting you know.
Click to expand...
Click to collapse
Use a standalone dark theme toggle, not 'Style' one.

@LuK1337 Thanks a lot for the build. Time to buy the Tablet.
One Question:
 @LuK1337 or anyone, are the corners rounded like that of the stock ROM or are the corners sharp?

Related

[ROM][10.0.0_r41]LineageOS 17.1 for Moto E5 Play (James) + Recovery [64Bit]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS is a free, community-built, aftermarket firmware distribution of Android 6, which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review.
What's working :
Audio
Bluetooth
Camera
Display
Encryption
Face unlock
GPS
RIL (calls, SMS, Data)
Sensors
Video Playback
Wi-Fi
Known issues:
You tell me the rest
Report bugs:
DO NOT Report bugs if you're running a custom kernel or you installed Xposed
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
If the problem disappears after running "setenforce 0" from a root shell, grab /data/misc/audit/audit.log
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. Please also do not report known issues.
Code:
What is your--
LineageOS version:
LineageOS Download url:
Gapps version:
Did you--
wipe:
restore with titanium backup:
reboot after having the issue:
Are you using--
a task killer:
a non-stock kernel (Ignore):
other modifications:
Provide any additional information (observations/frequency of problem/last version it worked on/etc) as needed:
DO NO POST BUGS WITHOUT LOGS AND PROPER STEPS TO REPRODUCE THE ISSUE
Follow Instructions Carefully otherwise you will get error :
fastboot boot ofoxSAR.img (ONLY BOOT IT!! TOO BIG TO FLASH!)
-- OR --
fastboot boot twrp-james-bootonly.img (ONLY BOOT IT!)
-- then --
Wipe -> ADVANCED -- select system + vendor -> SWIPE TO WIPE
reboot bootloader
fastboot boot the recovery of your choice again
-- then --
Format data, Wipe cache & dalvik-cache
Flash ROM, Gapps 10 arm64 pico together (Download Gapps from downloads section)
Done-Reboot Now
Enjoy the clean Rom
64bit Downloads:
ROM:
Moto E5 Play (James) XT-1921
RECOVERY: twrp-james-bootonly.img
GAPPS: Gapps 10 arm64
Source code:
ROM: https://github.com/ForkLineageOS/android
KERNEL: https://github.com/HyperTeam/android_kernel_motorola_msm8937/tree/lineage-17.1
CREDITS:
LineageOS
Team Hyper
CAF
Special thanks to @deadman96385 (Sean Hoyt) for donating me a device :highfive:
Special thanks to @SykkNyzz for testing and donating me a similar device :highfive:
DONATIONS:
Please consider donating if you enjoy my work. It will be used for server expenses, Ty
Paypal donation link: https://www.paypal.me/brickjungle
XDA:DevDB Information
LineageOS-James, ROM for the Moto E5 Play
Contributors
whodat711, karthick mostwanted, JarlPenguin, electimon, wiktor140
Source Code: http://github.com/LineageOS
ROM OS Version: Android 10
ROM Kernel: Linux 3.x
Version Information
Status: Alpha
Created 2020-11-24
Last Updated 2020-11-24

whodat711 said:
LineageOS is a free, community-built, aftermarket firmware distribution of Android 6, which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review.
What's working :
Audio
Bluetooth
Camera
Display
Encryption
Face unlock
GPS
RIL (VoLTE calls, SMS, Data)
Sensors
Video Playback
Wi-Fi
Known issues:
You tell me the rest
Report bugs:
DO NOT Report bugs if you're running a custom kernel or you installed Xposed
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
If the problem disappears after running "setenforce 0" from a root shell, grab /data/misc/audit/audit.log
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. Please also do not report known issues.
Code:
What is your--
LineageOS version:
LineageOS Download url:
Gapps version:
Did you--
wipe:
restore with titanium backup:
reboot after having the issue:
Are you using--
a task killer:
a non-stock kernel (Ignore):
other modifications:
Provide any additional information (observations/frequency of problem/last version it worked on/etc) as needed:
DO NO POST BUGS WITHOUT LOGS AND PROPER STEPS TO REPRODUCE THE ISSUE
Follow Instructions Carefully otherwise you will get error :
fastboot boot ofoxSAR.img (ONLY BOOT IT!! TOO BIG TO FLASH!)
Format data, Wipe cache & dalvik-cache
Flash ROM, Gapps 10 arm64 together (Download Gapps from downloads section)
Done-Reboot Now
Enjoy the clean Rom
64bit Downloads:
ROM:
Moto E5 Play (James) XT-1921
RECOVERY: https://www.androidfilehost.com/?fid=4349826312261800880
GAPPS: Gapps 10 arm64
Source code:
ROM: https://github.com/ForkLineageOS/android
KERNEL: https://github.com/HyperTeam/android_kernel_motorola_msm8937/tree/lineage-17.1
CREDITS:
LineageOS
Team Hyper
CAF
@phhusson
Special thanks to SykkNyzz for testing and donating me a device :highfive:
DONATIONS:
Please consider donating if you enjoy my work. It will be used for server expenses, Ty
Paypal donation link: https://www.paypal.me/karthick0698
UPI: [email protected] (do mention device name while donating) PM for any other mode of transaction
XDA:DevDB Information
LineageOS-James, ROM for the Moto E5
Contributors
whodat711, karthick mostwanted, JarlPenguin, electimon, wiktor140
Source Code: http://github.com/LineageOS
ROM OS Version: Android 10
ROM Kernel: Linux 3.x
Version Information
Status: Alpha
Created 2020-11-24
Last Updated 2020-11-24
Click to expand...
Click to collapse
Great you are great thanks for such a brilliant work you had done.

welcome

im on rjames and fingerprint sensor not working for me + please tell me how to disable the n/a thing

and the "face unlock" uses the back camera and not the front and even if you filp it over and do it , it doesnt work

Thank you so much it all worked like a charm!!!

Thanks, two issues for me XT1921-1 (Comcast)
1. fingerprint sensor is not found
2. face unlock use the back camera instead of the front one
other than those all other works fine.
did try to rebuild lineage using OPs GitHub source, but kept getting this error:
FAILED: ninja: 'out/target/product/james/kernel', needed by 'out/target/product/james/boot.img', missing and no known rule to make it

dogplant said:
im on rjames and fingerprint sensor not working for me + please tell me how to disable the n/a thing
Click to expand...
Click to collapse
you can flash a white background logo.bin to cover the n/a message
GitHub - eriktim/moto-bootlogo: Modify the Motorola Moto Series' boot logo
Modify the Motorola Moto Series' boot logo. Contribute to eriktim/moto-bootlogo development by creating an account on GitHub.
github.com

Thanks for this! No issues installing on the XT1921-3. So far I'm really pleased with the performance over stock, so much snappier, and this is much better than the unofficial 15.1 build from a couple years ago. Using gapps-pico.
XT1921-3 (T-mobile)
Issues:
The Camera works, with some issues. Not dealbreakers for me, because if you care about cameras this is absolutely not the phone to be using anyway.
Overall, I believe the front a rear cameras and lights are reversed, which is why the face unlock is the rear camera. Camera shows this as well - prior to taking a photo, selfie mode will show the actual photo (i.e. not mirrored), and the rear camera will always show a mirrored photo. On both stock and open camera, mirroring selfies will only mirror photos taken from the rear camera.
The camera also does not rotate correctly. If you rotate the photo 90 degrees, the image will rotate 180 degrees.
Flashlight only works on the front light.

Getting stuck at face unlock it wont let me bypass the face unlock setup

Any update on this rom please

would love to see a rom with low memory flag enabled, so we can run it as an android go. this phone has only 2G memory, I have opengapp pico, and it already using 1.5G memory

Please help us at @whodat711

Issue I ran into:
- Camera is reversed. It is difficult to get past the initial setup that really wants to use face unlock and getting it to work when you have to use the rear camera is difficult. It also uses the wrong camera when you pull up the camera app. I don't see a way to get it to use the opposite camera.

Hi to everyone and thank to whodat.
I am new on this area but i want to try to install this rom on my device.
Someone could point me to a manual or detailed instructions for beginners?
Also , is inevitable to flash Gapps? i was thinking in obtain all my apps from F-droid

pepito1312 said:
Hi to everyone and thank to whodat.
I am new on this area but i want to try to install this rom on my device.
Someone could point me to a manual or detailed instructions for beginners?
Also , is inevitable to flash Gapps? i was thinking in obtain all my apps from F-droid
Click to expand...
Click to collapse
Instructions at OP

Have new build but having trouble uploading to AFH
will post on tg

download 64bit TWRP (Too big to flash to recovery partition)
twrp-james-bootonly.img
drive.google.com
fastboot boot twrp-james-bootonly.img
lineage-17.1-20210201-UNOFFICIAL-james.zip
drive.google.com
wipe -> advanced -> select system + select vendor
wipe -> format data - type yes
reboot bootloader
fastboot boot twrp-james-bootonly.img
flash rom
flash gapps (optional)
reboot system
setup ROM
Enjoy!

whodat711 said:
download 64bit TWRP (Too big to flash to recovery partition)
twrp-james-bootonly.img
drive.google.com
fastboot boot twrp-james-bootonly.img
lineage-17.1-20210201-UNOFFICIAL-james.zip
drive.google.com
wipe -> advanced -> select system + select vendor
wipe -> format data - type yes
reboot bootloader
fastboot boot twrp-james-bootonly.img
flash rom
flash gapps (optional)
reboot system
setup ROM
Enjoy!
Click to expand...
Click to collapse
I guessed the camera is fixed ,yeeepiieee

whodat711 said:
download 64bit TWRP (Too big to flash to recovery partition)
twrp-james-bootonly.img
drive.google.com
fastboot boot twrp-james-bootonly.img
lineage-17.1-20210201-UNOFFICIAL-james.zip
drive.google.com
wipe -> advanced -> select system + select vendor
wipe -> format data - type yes
reboot bootloader
fastboot boot twrp-james-bootonly.img
flash rom
flash gapps (optional)
reboot system
setup ROM
Enjoy!
Click to expand...
Click to collapse
WhatsApp unable to play video

Doing new build now , hopefully fixed that issue
Also including my custom kernel in build now.
Will update links when build is done.

[ROM][UNOFFICIAL][RAMDISK][11] LineageOS 18.1 for Galaxy S10e/S10/S10+/S10 5G Exynos

Requirements:
Any Q or R based firmware installed on your device.
Pre-Install Instructions
Warning: The following instructions will unlock the bootloader and wipe all userdata on the device.
Connect the device to a Wi-Fi network.
Enable Developer Options by pressing the “Build Number” option in the “Settings” app within the “About” menu
From within the Developer options menu, enable OEM unlock.
Power off the device, and boot it into download mode:
With the device powered off, hold Volume Down + Bixby and connect USB cable to PC.
Now, click the button that the onscren instructions coorelate to “Continue” and/or “Unlock Bootloader”.
Your device will reboot, you may now unplug the USB cable from your device.
The device will demand you format userdata, please follow the onscreen instructions to do so.
Run through Android Setup skipping everything you can, then connect the device to a Wi-Fi network.
Re-enable Development settings by clicking the “Build Number” option 10 times, in the “Settings” app within the “About” menu, and verify that “OEM Unlock” is still enabled in the “Developer options” menu.
Installing LineageOS for the first time
Flash lineage recovery
Only the provided lineage recovery will be supported,
using TWRP might result in a possible data loss!!
If using Odin rename the lineage recovery image for your model to recovery.img and add it to a .tar archive using e.g 7zip.
If using Heimdall use: heimdall flash --RECOVERY recovery.img --no-reboot
Boot lineage recovery
IMPORTANT: Do not boot into system again before booting recovery, or system will restore stock recovery!
If using Odin untick auto-reboot before flashing.
After flashing reboot by pressing Volume Down and Power for approximately 7 seconds,
immediately hold Volume Up, Bixby and Power to boot recovery
IMPORTANT: As of OneUI 3 your device needs to be connected to a PC via USB cable in order to be able to
boot recovery via Volume Up, Bixby and Power.
Factory reset using Factory reset -> Format data/factory reset
Warning: Unlike TWRP this will also erase internal storage!
Sideload LineageOS by enabling sideload via Apply Update -> Apply from ADB
Then run adb sideload <path to your lineage.zip> on your PC
Optional:
Sideload GApps and magisk by repeating above step
with their zip/apk
Magisk
As this ROM has a working ramdisk sideloading the magisk apk is enough, just as it is
on every other device, no bootimage with magisk included or installing to recovery is needed!

Features
SELinux enforcing
AES-256-XTS FBE encryption
Latest Linux 4.14.x kernel
All cameras are working
Ramdisk is working
Dolby atmos is working
Known issues
VoLTE/VoWiFi
You tell me

Thanks for providing sources and the doing the hardwork to bring up the device, could you also provide what firmware version is required?
Also a simple guide for flashing firmware, would be helpful.

mcgi5sr2 said:
Thanks for providing sources and the doing the hardwork to bring up the device, could you also provide what firmware version is required?
Also a simple guide for flashing firmware, would be helpful.
Click to expand...
Click to collapse
Both Q and R firmwares should work
I'll add that and a guide for updating firmware later

Thank you so much for your work!
Can you provide a little more information about what's working and what bugs people might expect? I believe many are wondering about SELinux status and camera (quality and if all are usable).

DerSteppo said:
Thank you so much for your work!
Can you provide a little more information about what's working and what bugs people might expect? I believe many are wondering about SELinux status and camera (quality and if all are usable).
Click to expand...
Click to collapse
Sure I can add that too, SELinux is enforcing and all cameras are working (on beyond1lte at least)

Is this the new version of Modpunk's Lineage OS 17.1, so with selinux enforced and encrypted?

counti said:
Is this the new version of Modpunk's Lineage OS 17.1, so with selinux enforced and encrypted?
Click to expand...
Click to collapse
This is based on new trees but indeed reuses some stuff from old whatawurst trees.
But yes it's also FBE encrypted and enforcing.

Linux4 said:
Sure I can add that too, SELinux is enforcing and all cameras are working (on beyond1lte at least)
Click to expand...
Click to collapse
Thank you so much and keep up the great work!

Linux4 said:
This is based on new trees but indeed reuses some stuff from old whatawurst trees.
But yes it's also FBE encrypted and enforcing.
Click to expand...
Click to collapse
Is it possible to upgrade from Modpunk's Lineage OS 17.1? With TWRP from Modpunk?

counti said:
Is it possible to upgrade from Modpunk's Lineage OS 17.1? With TWRP from Modpunk?
Click to expand...
Click to collapse
No, sorry
And TWRP won't be supported at all here, see Post #2

Linux4 said:
No, sorry
And TWRP won't be supported at all here, see Post #2
Click to expand...
Click to collapse
But Lineage Recovery has no backup function right? that's a pity, How do you make backups?

counti said:
But Lineage Recovery has no backup function right? that's a pity, How do you make backups?
Click to expand...
Click to collapse
Do it with some app like https://f-droid.org/en/packages/dk.jens.backup/ ?
Or disable FBE encryption if you are fine with that and use TWRP ...
As long as FBE is enabled you'll eventually corrupt your /data partition by using TWRP.

is it possible to use samsung camera on aosp roms? i have s10e unfortunately can't focus on zgcam and it has color shifts in some cases. i want to flash aosp but cant find a proper camera app

hi_s10e said:
is it possible to use samsung camera on aosp roms? i have s10e unfortunately can't focus on zgcam and it has color shifts in some cases. i want to flash aosp but cant find a proper camera app
Click to expand...
Click to collapse
Not possible to use Samsung camera on any AOSP ROMS unfortunately

@Linux4 Thanks for you nice work, really appreciate it.
I was waiting for an update on Modpunks 17.1 version. Now it seams it is dead and no official LineageOS builds exist to regularly update that version. It's a bit annoying to format and set up the OS all over again every half a year or so. So do you intend to push your work to become an official version?

wora92 said:
@Linux4 Thanks for you nice work, really appreciate it.
I was waiting for an update on Modpunks 17.1 version. Now it seams it is dead and no official LineageOS builds exist to regularly update that version. It's a bit annoying to format and set up the OS all over again every half a year or so. So do you intend to push your work to become an official version?
Click to expand...
Click to collapse
I'm thinking about doing it in the future, but can't promise anything

cgirerd said:
Not possible to use Samsung camera on any AOSP ROMS unfortunately
Click to expand...
Click to collapse
thank you

is there anyway to make volte work ?

[ROM][13][UNOFFICIAL] LineageOS 20 - microG [OnePlus Nord/avicii]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

You care a lot about privacy and security? You want an up to date LineageOS build that will not hold you back in regards of user experience?
Then LineageOS 20 microG edition is right for you! (Non-microG vanilla LineageOS version also available).
Click to expand...
Click to collapse
LineageOS is a free, community built, aftermarket firmware distribution of Android 13, which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review.
What's working :
Boots
RIL
Fingerprint
Wi-Fi
Bluetooth
Camera
Audio
Sensors
Flash
GPS
Alert Slider
NFC
DT2W
Known issues :
-
Versions :
There are 2 versions available:
-LineageOS 20 with microG (includes microG, FDroid and AuroraStore)
-LineageOS 20 vanilla (no Gapps / nothing added)
In order to prevent problems please use the recovery image included in this release!
Instructions :
-Download the ROM and recovery image
-Boot into bootloader: adb reboot bootloader
-Boot the recovery image: fastboot boot recovery.img
-Format data / do a factory reset in recovery
-Go to Apply update and choose Apply from ADB
-Sideload the rom: adb sideload rom.zip
Please note:
in order to enable push notifications open up microG services core,
set up your Google account and enable device registration & cloud messaging.
Downloads :
-Recovery image: *Link*
-LineageOS 20 with microG included: *Link*
-LineageOS 20 vanilla (no Gapps included): *Link*
Android OS version: 13
Build author/ROM Maintainer: @MajorP93, @KakatkarAkshay
Kernel Source: *Link*
Device Tree: *Link*
Based on: LineageOS
Status: Stable
Current Stable Version: 20
Stable Release Date: Updated monthly
Created: 2023-01-22
Last Updated: 2023-02-20
Telegram Group: *Link*
Special Thanks:
- to the LineageOS and microG team
- @KakatkarAkshay for putting in awesome work towards bringing up OOS12 firmware based trees.

HOW TO GET GAPPS IN THE VANILLA VERSION OF THIS ROM:
Reference: *Link*
Follow these steps:
-Download Gapps from here: *Link* (MindTheGapps-13.0.0-arm64)
-Boot into bootloader: adb reboot bootloader
-Boot the recovery image: fastboot boot recovery.img
-Format data / do a factory reset in recovery
-Go to Apply update and choose Apply from ADB
-Sideload the vanilla version of the rom: adb sideload rom.zip
-Reboot into recovery: click advanced --> reboot to recovery (!important do not start LineageOS yet)
-Go to Apply update again and choose Apply from ADB
-Sideload the Gapps package you just downloaded: adb sideload gapps.zip, when prompted select "install anyway" after the "signature verification" message.
UPDATING THE ROM:
Unless I say the opposite in the update announcement, this ROM can be updated using the dirty flash method.
In order to do so, follow these steps:
-Download the new version of the ROM you are using (microG/vanilla)
-Reboot into recovery: adb reboot recovery
-DO NOT CLICK ON FACTORY RESET / WIPE DATA
-Flash the Zip-File of the new ROM: adb sideload rom.zip
Important: if you are using the vanilla version of the ROM,
you have to re-flash Gapps after updating and before starting LineageOS:
-Reboot into recovery: click advanced --> reboot to recovery
-Go to Apply update again and choose Apply from ADB
-Download Gapps from the link above
-Sideload the Gapps package you just downloaded: adb sideload gapps.zip, when prompted select "install anyway" after the "signature verification" message.

I was waiting for this clean Lineage port, but i need to make sure that everything works before i give it a go. I only have a single phone and i need pretty much eveything to work (NFC, Camera with decent quality, banking apps and AOD).
I will keep my eye on this thread. Thank you.

Thank you so much.
If I install your microG version now, will I be able to dirty flash the version from https://lineage.microg.org/ when it becomes official?

sorin000 said:
I was waiting for this clean Lineage port, but i need to make sure that everything works before i give it a go. I only have a single phone and i need pretty much eveything to work (NFC, Camera with decent quality, banking apps and AOD).
I will keep my eye on this thread. Thank you.
Click to expand...
Click to collapse
I am using this build as a daily driver myself and so far everything works well.
As for camera quality: the stock LineageOS camera app is not really good but in the microG version of this build you can install GCam without any issues.

uhuhuh said:
Thank you so much.
If I install your microG version now, will I be able to dirty flash the version from https://lineage.microg.org/ when it becomes official?
Click to expand...
Click to collapse
In that case formating data (full wipe) would be required. LineageOS has a preinstalled backup tool which makes it easier for you to import your data after a full wipe.
On a side note: it can take a while for this becoming official since LineageOS only accept source-built-kernels. This build here uses the stock prebuilt kernel from OnePlus because OnePlus released buggy kernel sources (NFC broken).
IMO working NFC is important which is why I will start working on making this official once the NFC functionality get's fixed in OnePlus kernel sources.

MajorP93 said:
View attachment 5402769
LineageOS is a free, community built, aftermarket firmware distribution of Android 11, which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review.
What's working :
Boots
RIL
Fingerprint
Wi-Fi
Bluetooth
Camera
Audio
Sensors
Flash
GPS
Alert Slider
NFC
Known issues :
DT2W
Versions :
There are 2 versions available:
LineageOS 18.1 with microG (includes microG, FDroid and AuroraStore)
LineageOS 18.1 vanilla (no GApps / nothing added)
In order to prevent problems please use the recovery image included in this release!
Instructions :
-Download the ROM and recovery image
-Boot into bootloader: adb reboot bootloader
-Flash the recovery image: fastboot flash recovery recovery.img
-Format data / do a factory reset in recovery
-Reboot into recovery: fastboot reboot recovery
-Go to Apply update and choose Apply from ADB
-Sideload the rom: adb sideload rom.zip
Please note:
in order to enable push notifications open up microG services core,
set up your Google account and enable device registration & cloud messaging.
Downloads :
-Recovery image: *Link*
-LineageOS 18.1 with microG included (recommended): *Link*
-LineageOS 18.1 without additions: *Link*
Android OS version: 11
Build author/ROM Maintainer: @MajorP93
Kernel Source: Stock Prebuilt Kernel
Based on: LineageOS
Status: Stable
Current Stable Version: 18.1
Stable Release Date: Updated monthly
Created: 2021-09-05
Last Updated: 2021-09-05
Special Thanks:
- to the LineageOS and microG team
- @KakatkarAkshay for maintaning PixelExperience avicii device tree on which this build is heavily based on.
- @zephiK for introducing me to the Android development world.
Click to expand...
Click to collapse
It's great to see a new ROM for the device , especially one that focuses on privacy . Thanks OP , for this awesome new addition to the Nord community , I'll definitely try it out soon !

hi! im found an issue when i flash gapps.. on screen, appear error 70. idk why recovery shows this..

CrazyLyte said:
hi! im found an issue when i flash gapps.. on screen, appear error 70. idk why recovery shows this..
Click to expand...
Click to collapse
Hi!
Did you use OpenGApps Pico and followed the instructions in exact order?
It is important to reboot to recovery after installing LineageOS vanilla und then flash GApps.

MajorP93 said:
Hi!
Did you use OpenGApps Pico and followed the instructions in exact order?
It is important to reboot to recovery after installing LineageOS vanilla und then flash GApps.
Click to expand...
Click to collapse
yes.. it says storage space is insufficient

CrazyLyte said:
yes.. it says storage space is insufficient
Click to expand...
Click to collapse
Thanks for reporting back!
I took the instructions from the official LineageOS wiki and did not test GApps extensively since I only use microG.
I will test this and create an update this week where GApps will work.
In the meantime you can use microG if you want.
It also gives you the ability to use Google stuff.
//EDIT: you can also try BitGApps, those are like OpenGApps Pico but smaller.
I updated the GApps instructions accordingly.
If you want to try those please start over again with the instructions.

MajorP93 said:
Thanks for reporting back!
I took the instructions from the official LineageOS wiki and did not test GApps extensively since I only use microG.
I will test this and create an update this week where GApps will work.
In the meantime you can use microG if you want.
It also gives you the ability to use Google stuff.
Click to expand...
Click to collapse
ty a lot! i wait for next release! anyway, good job.. it is very smooth and fod is pretty fast! im looking forward

long awaited 18.1 is here . downloading right away. as you mentioned Dt2w is not working ..can we try stormbreaker kernel on this rom to enable it?
Also can ROM be flashed with OrFox recovery

MajorP93 said:
Thanks for reporting back!
I took the instructions from the official LineageOS wiki and did not test GApps extensively since I only use microG.
I will test this and create an update this week where GApps will work.
In the meantime you can use microG if you want.
It also gives you the ability to use Google stuff.
//EDIT: you can also try BitGApps, those are like OpenGApps Pico but smaller.
I updated the GApps instructions accordingly.
If you want to try those please start over again with the instructions.
Click to expand...
Click to collapse
same problem. ive tried also with nikgapps core (more smaller).. is a problem for the rom

5fusion said:
long awaited 18.1 is here . downloading right away. as you mentioned Dt2w is not working ..can we try stormbreaker kernel on this rom to enable it?
Click to expand...
Click to collapse
Hey!
I can not ensure that all parts of the ROM will work using Stormbreaker kernel but you can sure try!
CrazyLyte said:
same problem. ive tried also with nikgapps core (more smaller).. is a problem for the rom
Click to expand...
Click to collapse
Thanks for reporting back, I am working on a new release right now in which flashing of GApps will be fixed.

Great job, I found a little bug, when I try to use an app with fingerprint acces the finger print doesn't work

MajorP93 said:
Thanks for reporting back, I am working on a new release right now in which flashing of GApps will be fixed.
Click to expand...
Click to collapse
thanks for your job! when u push new, i flash it immediately

UPDATE 2021-09-07
Changelog:
-LineageOS 18.1 vanilla version: support for flashing GApps has been added (tested and verified with OpenGApps Pico) --> please refer to the instructions above (flashing GApps)
--> Download link in original post has been updated

MajorP93 said:
UPDATE 2021-09-07
Changelog:
-LineageOS 18.1 vanilla version: support for flashing GApps has been added (tested and verified with OpenGApps Pico) --> please refer to the instructions above (flashing GApps)
--> Download link in original post has been updated
Click to expand...
Click to collapse
ty a lot! i have a question.. u use tg? my idea is to create a group for los 18.1 and talk about it (also test the test buids and other as bugs)
so, we can help u to mantain the project up with no bugs pretty important.. let me know, if u want do this. thx in advance

CrazyLyte said:
ty a lot! i have a question.. u use tg? my idea is to create a group for los 18.1 and talk about it (also test the test buids and other as bugs)
so, we can help u to mantain the project up with no bugs pretty important.. let me know, if u want do this. thx in advance
Click to expand...
Click to collapse
Thanks for the suggestion!
I like the idea!
I think this can help with testing while working on making this an official port one day and also help with making this project bigger.
I will see what I can do in this regard when I have the time (set up the group etc.)
Best regards

[ROM][OFFICIAL][gts4lv|gts4lvwifi][12] LineageOS 19

LuK1337 said:
LineageOS is a free, community built, aftermarket firmware distribution of Android 12, which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project, with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS GitHub organization. And if you would like to contribute to LineageOS, please visit our Gerrit Code Review. You can also view the changelog for a full list of changes & features.
Instructions :
https://wiki.lineageos.org/devices/gts4lvwifi/install
Downloads :
https://www.androidfilehost.com/?w=files&flid=332252
http://downloads.codefi.re/jdcteam/luk/lineage-19_0/gts4lvwifi
https://sourceforge.net/projects/luk-lineageos/files/gts4lvwifi/lineage-19.0
Reporting Bugs
DO NOT Report bugs if you're running a custom kernel, or you installed Xposed
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
If it is a random reboot, grab /sys/fs/pstore/console-ramoops and /sys/fs/pstore/dmesg-ramoops-0. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. Please also do not report known issues. Any bug not reported in the bug report format below may be ignored.
Code:
What is your--
LineageOS version:
LineageOS Download url:
Gapps version:
Did you--
wipe:
restore with titanium backup:
reboot after having the issue:
Are you using--
a task killer:
a non-stock kernel:
other modifications:
Provide any additional information (observations/frequency of problem/last version it worked on/etc) as needed:
Click to expand...
Click to collapse
Omg, thank you!

Amazing! Thank you!

Yes!

Installed and runs just fine Just interestingly, after flashing nikgapps core there were no Gapps after booting... But flame gapps work ok
Thanks the Dev for bringing A12 for us! 🤝🏻

Lord Sithek said:
Installed and runs just fine Just interestingly, after flashing nikgapps core there were no Gapps after booting... But flame gapps work ok
Thanks the Dev for bringing A12 for us! 🤝🏻
Click to expand...
Click to collapse
Do i need to format data of only with factory reset i can flash

apokit said:
Do i need to format data of only with factory reset i can flash
Click to expand...
Click to collapse
I wiped and formatted everything except MicroSD card, then flahsed latest firmware available in Odin (https://github.com/luk1337/gts4lv-fw/releases/tag/T720XXU2DUL1), then flashed all necessary stuff in TWRP

Brightness slider not showing on notification center even set to show always
LineageOS version: 19.0
LineageOS Download url: https://www.androidfilehost.com/?w=files&flid=332252
Gapps version: MindTheGapps 12 arm64 http://downloads.codefi.re/jdcteam/javelinanddart/gapps
Did you--
wipe: yes, cache system data
restore with titanium backup: no
reboot after having the issue: yes
Are you using--
a task killer: no
a non-stock kernel: no
other modifications: Lineage Recovery

whiteyaksa said:
Brightness slider not showing on notification center even set to show always
LineageOS version: 19.0
LineageOS Download url: https://www.androidfilehost.com/?w=files&flid=332252
Gapps version: MindTheGapps 12 arm64 http://downloads.codefi.re/jdcteam/javelinanddart/gapps
Did you--
wipe: yes, cache system data
restore with titanium backup: no
reboot after having the issue: yes
Are you using--
a task killer: no
a non-stock kernel: no
other modifications: Lineage Recovery
View attachment 5526051View attachment 5526049
Click to expand...
Click to collapse
Don't report missing features, I'm well aware they're missing.

whiteyaksa said:
Brightness slider not showing on notification center even set to show always
Click to expand...
Click to collapse
Brightness slider is available on mine.
Edit:
I dont have wifi available though. I click wifi button and it switches off immediately. Im going to install via odin rather than twrp and if that doesnt work, Ill post a bug report with logcat.
Fixed the broken wifi by flashing https://github.com/luk1337/gts4lv-fw/releases/tag/T720XXU2DUD7 this vb meta data in AP slot of ODIN.
@LuK1337 : los19, EXCELLENT!! WHOOHOO!! Thanks buddy!!!
If you want any testing, let me know...

Can you please release Lineage Recovery 19.0? Thank you

whiteyaksa said:
Can you please release Lineage Recovery 19.0? Thank you
Click to expand...
Click to collapse
Not sure if it makes sense to release recovery images separately, but if you want up-to-date recovery (that also passes signature check for these builds), then simply toggle "Update recovery" in system updater preferences, and it should automatically flash it.

LuK1337 said:
Not sure if it makes sense to release recovery images separately, but if you want up-to-date recovery (that also passes signature check for these builds), then simply toggle "Update recovery" in system updater preferences, and it should automatically flash it.
Click to expand...
Click to collapse
the updater crashes when i save this option

whiteyaksa said:
the updater crashes when i save this option
Click to expand...
Click to collapse
Oh? Can you take a logcat?
EDIT: Actually nvm, it's probably just SELinux anyway. You can set do adb root + adb shell setprop persist.vendor.recovery_update true instead.

LuK1337 said:
Oh? Can you take a logcat?
EDIT: Actually nvm, it's probably just SELinux anyway. You can set do adb root + adb shell setprop persist.vendor.recovery_update true instead.
Click to expand...
Click to collapse
I did this and reflashed the LOS 19.0 image, restart to the recovery and it's still 18.1

Hi, thank you for amazing work. In portrait mode quick settings looks like this. Any suggestions.
Your browser is not able to display this video.

Forgive me the stupid question but can I do a dirty flash from the official lineage 18?

XRed_CubeX said:
Forgive me the stupid question but can I do a dirty flash from the official lineage 18?
Click to expand...
Click to collapse
You should be able to. Flash L-OS and gapps straight afterward. Optionally magisk if you need so

Ok thanks for the tip

XRed_CubeX said:
Ok thanks for the tip
Click to expand...
Click to collapse
Remember to take a backup first and update your firmware

[ROM][OFFICIAL] LineageOS 20 for Galaxy S10e/S10/S10+/S10 5G Exynos

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS is a free, community built, aftermarket firmware distribution of Android 13, which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Instructions:
Follow the instructions on the wiki page for your device https://wiki.lineageos.org/devices/#samsung
Only the provided lineage recovery will be supported, using TWRP might result in a possible data loss!
Note: You may use Odin instead of Heimdall, for this you will need to rename the recovery image to recovery.img and pack it into a tar archive.
Downloads:
Builds: https://download.lineageos.org
Firmware: Included in the build
GApps: https://wiki.lineageos.org/gapps.html
Reporting Bugs
DO NOT Report bugs if you're running a custom kernel or you installed Xposed
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
If it is a random reboot, grab /proc/last_kmsg. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
If the problem disappears after running "setenforce 0" from a root shell, grab /data/misc/audit/audit.log
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. Please also do not report known issues. Any bug not reported in the bug report format below may be ignored.
Code:
What is your--
LineageOS version:
LineageOS Download url:
Gapps version:
Did you--
wipe:
restore with titanium backup:
reboot after having the issue:
Are you using--
a task killer:
a non-stock kernel:
other modifications:
Provide any additional information (observations/frequency of problem/last version it worked on/etc) as needed:
Support
Telegram group
Contributors
Linux4
Source Code: https://github.com/LineageOS
Kernel source: https://github.com/LineageOS/android_kernel_samsung_exynos9820
LineageOS is a free, community built, aftermarket firmware distribution of Android 11, which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Instructions:
Follow the instructions on the wiki page for your device https://wiki.lineageos.org/devices/#samsung
Only the provided lineage recovery will be supported, using TWRP might result in a possible data loss!
Note: You may use Odin instead of Heimdall, for this you will need to rename the recovery image to recovery.img and pack it into a tar archive.
Downloads:
Builds: https://download.lineageos.org
GApps: https://wiki.lineageos.org/gapps.html
Reporting Bugs
DO NOT Report bugs if you're running a custom kernel or you installed Xposed
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
If it is a random reboot, grab /proc/last_kmsg. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
If the problem disappears after running "setenforce 0" from a root shell, grab /data/misc/audit/audit.log
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. Please also do not report known issues. Any bug not reported in the bug report format below may be ignored.
Code:
What is your--
LineageOS version:
LineageOS Download url:
Gapps version:
Did you--
wipe:
restore with titanium backup:
reboot after having the issue:
Are you using--
a task killer:
a non-stock kernel:
other modifications:
Provide any additional information (observations/frequency of problem/last version it worked on/etc) as needed:
Support
Telegram group
Contributors
Linux4
Source Code: https://github.com/LineageOS
Kernel source: https://github.com/LineageOS/android_kernel_samsung_exynos9820

reserved

reserved

Finally, nice to see official rom, is volte and vowifi supported

I've been on this since it first showed up on the lineage site and it's rock solid. Thanks for keeping our devices relevant!

alexdonwarez said:
Finally, nice to see official rom, is volte and vowifi supported
Click to expand...
Click to collapse
afaik both depends on samsung's proprietary stuff and no AOSP ROM has it.

I am interested in some features, namely double tap to sleep, tap to wake, raise to wake, and a fully working cam. Could you give me some info on these?
Thanks a lot!

sjeps said:
I am interested in some features, namely double tap to sleep, tap to wake, raise to wake, and a fully working cam. Could you give me some info on these?
Thanks a lot!
Click to expand...
Click to collapse
Dt2s - yes
T2w - yes
R2w - not afaik
Cam works fine, but I prefer gcam.

Thanks a lot for the reply!
Regarding the camera, I found that with some other ROMs the camera stutters during the shooting, and also the slow-motion isn't working at all
This is true for Gcam as well (in other roms)
The only stable camera I found is the stock one, e.g. in OneUi 5 adapted ROM
d3viou5 said:
Dt2s - yes
T2w - yes
R2w - not afaik
Cam works fine, but I prefer gcam.
Click to expand...
Click to collapse

sjeps said:
Thanks a lot for the reply!
Regarding the camera, I found that with some other ROMs the camera stutters during the shooting, and also the slow-motion isn't working at all
This is true for Gcam as well (in other roms)
The only stable camera I found is the stock one, e.g. in OneUi 5 adapted ROM
Click to expand...
Click to collapse
I'm using:
MGC_8.1.101_A9_GV2b_ruler.apk
No stuttering and slow motion (both speeds) works fine.
Worst case is some blown out highlights look neon blue, but this is rare. I think that may be a gcam processing issue over anything else.

thanks for developing OS 20 for S10, moved from os 19 recently, everything works ok but a bit disappointed to see that calls volume and notifications volume are combined, impossible to set volume level separately (as was in OS 19), any chance to change this in the future?

Hi,
I'm trying to upgrade my S10 beyond1lte from 19.1 to 20, but I have errors during installation and /vendor partition seams to be corrupted after installation (impossible to mount /vendor) :
I've tried to manualy decompress and comvert to img vendor.new.dat.br which is in lineage-20.0-2023MMDD-nightly-beyond1lte-signed.zip, but there is a probleme to open img (file corrupted ?).
When I took an other lineage zip (ie lineage-20.0-20230612-nightly-starlte-signed.zip for starlte), there is no problem to decompress, convert and open vendor.img.
Can you please verify vendor image which is in lineage-20.0-2023MMDD-nightly-beyond1lte-signed.zip (problem present for all zip available in download) ?
Thanks

A huge thanks to @Linux4 and the LOS team! I've been using it for a week and it's great, as usual

Hi.
I would like to see the changelog, but the link doesn't work.

[email protected] said:
Hi.
I would like to see the changelog, but the link doesn't work.
Click to expand...
Click to collapse
LineageOS 20.0 Changelog
LineageOS 20.0 Changelog. This page is listing the official changes and downloads for LineageOS 20.0 (Android 13 13).
www.lineageoslog.com

Develop Bugs

welcome