I tried to root my phone some time ago. In the middle of the process somewhere the screen went black and nothing worked anymore, maybe I followed the wrong Thread for this.
I could connect to Qualcom and tried all blank-flashes.bat I've found. All ended up with errors e. g.
**** Log buffer [000001] 2019-09-15_20:19:37 ****
[ 0.000] Opening device: \\.\COM6
[ 0.002] Detecting device
[ 0.005] ...cpu.id = 94 (0x5e)
[ 0.006] ...cpu.sn = xxx
[ 0.006] Opening singleimage
[ 0.007] Loading package
[ 0.013] ...filename = pkg.xml
[ 0.017] Loading programmer
[ 0.018] ...filename = programmer.elf
[ 0.018] Sending programmer
[ 0.177] Handling things over to programmer
[ 0.177] Identifying CPU version
[ 0.182] Waiting for firehose to get ready
[ 23.429] ReadFile() failed, GetLastError()=0
[ 23.532] ReadFile() failed, GetLastError()=0
[ 39.398] ReadFile() failed, GetLastError()=0
[ 39.504] ReadFile() failed, GetLastError()=0
[ 55.362] ReadFile() failed, GetLastError()=0
[ 55.468] ReadFile() failed, GetLastError()=0
[ 67.097] Waiting for firehose to get ready
[ 71.316] ReadFile() failed, GetLastError()=0
[ 71.418] ReadFile() failed, GetLastError()=0
[ 87.270] ReadFile() failed, GetLastError()=0
[ 87.375] ReadFile() failed, GetLastError()=0
[103.226] ReadFile() failed, GetLastError()=0
[103.327] ReadFile() failed, GetLastError()=0
[119.189] ReadFile() failed, GetLastError()=0
[119.291] ReadFile() failed, GetLastError()=0
[130.938] ...MSM8998 unknown
[130.941] Determining target secure state
[130.951] Waiting for firehose to get ready
[135.151] ReadFile() failed, GetLastError()=0
[135.253] ReadFile() failed, GetLastError()=0
[151.103] ReadFile() failed, GetLastError()=0
[151.208] ReadFile() failed, GetLastError()=0
[167.066] ReadFile() failed, GetLastError()=0
[167.170] ReadFile() failed, GetLastError()=0
[183.034] ReadFile() failed, GetLastError()=0
[183.137] ReadFile() failed, GetLastError()=0
[194.774] ...secure = no
[194.859] Initializing storage
[194.863] Waiting for firehose to get ready
[199.003] ReadFile() failed, GetLastError()=0
[199.106] ReadFile() failed, GetLastError()=0
[214.970] ReadFile() failed, GetLastError()=0
[215.070] ReadFile() failed, GetLastError()=0
[230.931] ReadFile() failed, GetLastError()=0
[231.033] ReadFile() failed, GetLastError()=0
[246.885] ReadFile() failed, GetLastError()=0
[246.986] ReadFile() failed, GetLastError()=0
[258.618] Configuring device...
[258.627] Waiting for firehose to get ready
[262.845] ReadFile() failed, GetLastError()=0
[262.947] ReadFile() failed, GetLastError()=0
[278.805] ReadFile() failed, GetLastError()=0
[278.909] ReadFile() failed, GetLastError()=0
[294.770] ReadFile() failed, GetLastError()=0
[294.871] ReadFile() failed, GetLastError()=0
[310.733] ReadFile() failed, GetLastError()=0
[310.834] ReadFile() failed, GetLastError()=0
[322.475] Waiting for firehose to get ready
[326.694] ReadFile() failed, GetLastError()=0
[326.795] ReadFile() failed, GetLastError()=0
[342.660] ReadFile() failed, GetLastError()=0
[342.762] ReadFile() failed, GetLastError()=0
[358.622] ReadFile() failed, GetLastError()=0
[358.728] ReadFile() failed, GetLastError()=0
[374.585] ReadFile() failed, GetLastError()=0
[374.688] ReadFile() failed, GetLastError()=0
[386.336] Waiting for firehose to get ready
[390.548] ReadFile() failed, GetLastError()=0
[390.650] ReadFile() failed, GetLastError()=0
[406.516] ReadFile() failed, GetLastError()=0
[406.621] ReadFile() failed, GetLastError()=0
[422.472] ReadFile() failed, GetLastError()=0
[422.572] ReadFile() failed, GetLastError()=0
[438.433] ReadFile() failed, GetLastError()=0
[438.536] ReadFile() failed, GetLastError()=0
[450.166] Waiting for firehose to get ready
[454.392] ReadFile() failed, GetLastError()=0
[454.497] ReadFile() failed, GetLastError()=0
[470.358] ReadFile() failed, GetLastError()=0
[470.461] ReadFile() failed, GetLastError()=0
[486.349] ReadFile() failed, GetLastError()=0
[486.458] ReadFile() failed, GetLastError()=0
[502.281] ReadFile() failed, GetLastError()=0
[502.383] ReadFile() failed, GetLastError()=0
[514.012] Initializing storage
[514.017] Waiting for firehose to get ready
[518.246] ReadFile() failed, GetLastError()=0
[518.347] ReadFile() failed, GetLastError()=0
[534.206] ReadFile() failed, GetLastError()=0
[534.308] ReadFile() failed, GetLastError()=0
[550.170] ReadFile() failed, GetLastError()=0
[550.272] ReadFile() failed, GetLastError()=0
[566.135] ReadFile() failed, GetLastError()=0
[566.236] ReadFile() failed, GetLastError()=0
[577.864] Configuring device...
[577.866] Waiting for firehose to get ready
[582.096] ReadFile() failed, GetLastError()=0
[582.201] ReadFile() failed, GetLastError()=0
[598.050] ReadFile() failed, GetLastError()=0
[598.151] ReadFile() failed, GetLastError()=0
[614.015] ReadFile() failed, GetLastError()=0
[614.117] ReadFile() failed, GetLastError()=0
[629.975] ReadFile() failed, GetLastError()=0
[630.081] ReadFile() failed, GetLastError()=0
[641.801] Waiting for firehose to get ready
[645.938] ReadFile() failed, GetLastError()=0
[646.042] ReadFile() failed, GetLastError()=0
[661.894] ReadFile() failed, GetLastError()=0
[661.997] ReadFile() failed, GetLastError()=0
[677.852] ReadFile() failed, GetLastError()=0
[677.957] ReadFile() failed, GetLastError()=0
[678.087] ReadFile() failed, GetLastError()=0
[693.811] ReadFile() failed, GetLastError()=0
[693.916] ReadFile() failed, GetLastError()=0
[705.559] Waiting for firehose to get ready
[709.768] ReadFile() failed, GetLastError()=0
[709.870] ReadFile() failed, GetLastError()=0
[725.723] ReadFile() failed, GetLastError()=0
[725.825] ReadFile() failed, GetLastError()=0
[741.682] ReadFile() failed, GetLastError()=0
[741.784] ReadFile() failed, GetLastError()=0
[757.639] ReadFile() failed, GetLastError()=0
[757.741] ReadFile() failed, GetLastError()=0
[769.382] Waiting for firehose to get ready
[773.602] ReadFile() failed, GetLastError()=0
[773.703] ReadFile() failed, GetLastError()=0
[789.566] ReadFile() failed, GetLastError()=0
[789.669] ReadFile() failed, GetLastError()=0
[805.532] ReadFile() failed, GetLastError()=0
[805.637] ReadFile() failed, GetLastError()=0
[821.490] ReadFile() failed, GetLastError()=0
[821.591] ReadFile() failed, GetLastError()=0
[833.223] Waiting for firehose to get ready
[837.447] ReadFile() failed, GetLastError()=0
[837.552] ReadFile() failed, GetLastError()=0
[853.411] ReadFile() failed, GetLastError()=0
[853.511] ReadFile() failed, GetLastError()=0
[869.377] ReadFile() failed, GetLastError()=0
[869.477] ReadFile() failed, GetLastError()=0
[885.332] ReadFile() failed, GetLastError()=0
[885.435] ReadFile() failed, GetLastError()=0
[897.062] Configuring device...
[897.066] Waiting for firehose to get ready
[901.290] ReadFile() failed, GetLastError()=0
[901.393] ReadFile() failed, GetLastError()=0
[917.254] ReadFile() failed, GetLastError()=0
[917.355] ReadFile() failed, GetLastError()=0
[933.214] ReadFile() failed, GetLastError()=0
[933.315] ReadFile() failed, GetLastError()=0
[949.177] ReadFile() failed, GetLastError()=0
[949.279] ReadFile() failed, GetLastError()=0
[960.912] Waiting for firehose to get ready
[965.140] ReadFile() failed, GetLastError()=0
[965.245] ReadFile() failed, GetLastError()=0
[981.092] ReadFile() failed, GetLastError()=0
[981.195] ReadFile() failed, GetLastError()=0
[997.049] ReadFile() failed, GetLastError()=0
[997.151] ReadFile() failed, GetLastError()=0
[1013.017] ReadFile() failed, GetLastError()=0
[1013.118] ReadFile() failed, GetLastError()=0
[1024.734] Waiting for firehose to get ready
[1028.975] ReadFile() failed, GetLastError()=0
[1029.077] ReadFile() failed, GetLastError()=0
[1044.939] ReadFile() failed, GetLastError()=0
[1045.044] ReadFile() failed, GetLastError()=0
[1060.902] ReadFile() failed, GetLastError()=0
[1061.006] ReadFile() failed, GetLastError()=0
[1076.862] ReadFile() failed, GetLastError()=0
[1076.965] ReadFile() failed, GetLastError()=0
[1088.596] Waiting for firehose to get ready
[1092.829] ReadFile() failed, GetLastError()=0
[1092.931] ReadFile() failed, GetLastError()=0
[1108.792] ReadFile() failed, GetLastError()=0
[1108.896] ReadFile() failed, GetLastError()=0
[1124.756] ReadFile() failed, GetLastError()=0
[1124.857] ReadFile() failed, GetLastError()=0
[1140.720] ReadFile() failed, GetLastError()=0
[1140.824] ReadFile() failed, GetLastError()=0
[1152.450] ERROR: do_package()->do_recipe()->do_configure()->fh_send()->get_fh()->no response
[1152.450] Check qboot_log.txt for more details
[1152.450] Total time: 1152.450s
[1152.450] There were some hiccups in backup and restore.
[1152.451] Please save the following files and see a Bootloader member.
[1152.451] 1) ./qboot_log.txt
[1152.451] 2) ./backup_0xxxx4_2019-09-15_202252.img
[1152.451]
[1152.451]
[1152.451] qboot version 3.85
[1152.451]
[1152.451] DEVICE {
[1152.451] name = "\\.\COM6",
[1152.451] flags = "0x64",
[1152.451] addr = "0x28FD74",
[1152.451] sahara.current_mode = "0",
[1152.451] api.buffer = "0x2540020",
[1152.451] cpu.serial = "xxx",
[1152.451] cpu.id = "94",
[1152.451] cpu.sv_sbl = "0",
[1152.451] cpu.name = "MSM8998",
[1152.451] storage.type = "UFS",
[1152.451] sahara.programmer = "programmer.elf",
[1152.451] module.firehose = "0x484800",
[1152.451] cpu.ver = "0",
[1152.451] cpu.vername = "unknown",
[1152.451] api.bnr = "0x496110",
[1152.451] }
[1152.451]
[1152.451]
[1152.451] Backup & Restore {
[1152.451] num_entries = 31,
[1152.451] restoring = "false",
[1152.451] restore_error = "not started",
[1152.451] entries[00] = { skipped = 0, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="cid"},
[1152.451] entries[01] = { skipped = 0, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="frp"},
[1152.451] entries[02] = { skipped = 0, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="hw"},
[1152.451] entries[03] = { skipped = 0, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="misc"},
[1152.451] entries[04] = { skipped = 0, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="persist"},
[1152.451] entries[05] = { skipped = 0, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="utags"},
[1152.451] entries[06] = { skipped = 0, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="devinfo"},
[1152.451] entries[07] = { skipped = 1, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="abl_a"},
[1152.451] entries[08] = { skipped = 1, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="cmnlib_a"},
[1152.451] entries[09] = { skipped = 1, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="cmnlib64_a"},
[1152.451] entries[10] = { skipped = 1, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="devcfg_a"},
[1152.451] entries[11] = { skipped = 1, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="hyp_a"},
[1152.451] entries[12] = { skipped = 1, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="keymaster_a"},
[1152.451] entries[13] = { skipped = 1, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="tz_a"},
[1152.451] entries[14] = { skipped = 1, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="storsec_a"},
[1152.451] entries[15] = { skipped = 1, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="prov_a"},
[1152.451] entries[16] = { skipped = 1, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="rpm_a"},
[1152.451] entries[17] = { skipped = 1, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="pmic_a"},
[1152.451] entries[18] = { skipped = 1, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="xbl_a"},
[1152.451] entries[19] = { skipped = 1, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="abl_b"},
[1152.451] entries[20] = { skipped = 1, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="cmnlib_b"},
[1152.451] entries[21] = { skipped = 1, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="cmnlib64_b"},
[1152.451] entries[22] = { skipped = 1, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="devcfg_b"},
[1152.451] entries[23] = { skipped = 1, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="hyp_b"},
[1152.451] entries[24] = { skipped = 1, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="keymaster_b"},
[1152.451] entries[25] = { skipped = 1, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="tz_b"},
[1152.451] entries[26] = { skipped = 1, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="storsec_b"},
[1152.451] entries[27] = { skipped = 1, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="prov_b"},
[1152.451] entries[28] = { skipped = 1, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="rpm_b"},
[1152.451] entries[29] = { skipped = 1, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="pmic_b"},
[1152.451] entries[30] = { skipped = 1, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="xbl_b"},
[1152.451] simg = {
[1152.451] filename = "backup_0xxxx_2019-09-15_202252.img",
[1152.451] entries[00] = { size = 557888, name = "programmer.elf" },
[1152.451] }
[1152.451] }
[1152.451]
Anyone any ideas what the problem is? It's a german unbranded model.
Thanks in advance!
BrickingsSoFunny said:
I tried to root my phone some time ago. In the middle of the process somewhere the screen went black and nothing worked anymore, maybe I followed the wrong Thread for this.
I could connect to Qualcom and tried all blank-flashes.bat I've found. All ended up with errors e. g.
**** Log buffer [000001] 2019-09-15_20:19:37 ****
[ 0.000] Opening device: \.\COM6
[ 0.002] Detecting device
[ 0.005] ...cpu.id = 94 (0x5e)
[ 0.006] ...cpu.sn = xxx
[ 0.006] Opening singleimage
[ 0.007] Loading package
[ 0.013] ...filename = pkg.xml
[ 0.017] Loading programmer
[ 0.018] ...filename = programmer.elf
[ 0.018] Sending programmer
[ 0.177] Handling things over to programmer
[ 0.177] Identifying CPU version
[ 0.182] Waiting for firehose to get ready
[ 23.429] ReadFile() failed, GetLastError()=0
[ 23.532] ReadFile() failed, GetLastError()=0
[ 39.398] ReadFile() failed, GetLastError()=0
[ 39.504] ReadFile() failed, GetLastError()=0
[ 55.362] ReadFile() failed, GetLastError()=0
[ 55.468] ReadFile() failed, GetLastError()=0
[ 67.097] Waiting for firehose to get ready
[ 71.316] ReadFile() failed, GetLastError()=0
[ 71.418] ReadFile() failed, GetLastError()=0
[ 87.270] ReadFile() failed, GetLastError()=0
[ 87.375] ReadFile() failed, GetLastError()=0
[103.226] ReadFile() failed, GetLastError()=0
[103.327] ReadFile() failed, GetLastError()=0
[119.189] ReadFile() failed, GetLastError()=0
[119.291] ReadFile() failed, GetLastError()=0
[130.938] ...MSM8998 unknown
[130.941] Determining target secure state
[130.951] Waiting for firehose to get ready
[135.151] ReadFile() failed, GetLastError()=0
[135.253] ReadFile() failed, GetLastError()=0
[151.103] ReadFile() failed, GetLastError()=0
[151.208] ReadFile() failed, GetLastError()=0
[167.066] ReadFile() failed, GetLastError()=0
[167.170] ReadFile() failed, GetLastError()=0
[183.034] ReadFile() failed, GetLastError()=0
[183.137] ReadFile() failed, GetLastError()=0
[194.774] ...secure = no
[194.859] Initializing storage
[194.863] Waiting for firehose to get ready
[199.003] ReadFile() failed, GetLastError()=0
[199.106] ReadFile() failed, GetLastError()=0
[214.970] ReadFile() failed, GetLastError()=0
[215.070] ReadFile() failed, GetLastError()=0
[230.931] ReadFile() failed, GetLastError()=0
[231.033] ReadFile() failed, GetLastError()=0
[246.885] ReadFile() failed, GetLastError()=0
[246.986] ReadFile() failed, GetLastError()=0
[258.618] Configuring device...
[258.627] Waiting for firehose to get ready
[262.845] ReadFile() failed, GetLastError()=0
[262.947] ReadFile() failed, GetLastError()=0
[278.805] ReadFile() failed, GetLastError()=0
[278.909] ReadFile() failed, GetLastError()=0
[294.770] ReadFile() failed, GetLastError()=0
[294.871] ReadFile() failed, GetLastError()=0
[310.733] ReadFile() failed, GetLastError()=0
[310.834] ReadFile() failed, GetLastError()=0
[322.475] Waiting for firehose to get ready
[326.694] ReadFile() failed, GetLastError()=0
[326.795] ReadFile() failed, GetLastError()=0
[342.660] ReadFile() failed, GetLastError()=0
[342.762] ReadFile() failed, GetLastError()=0
[358.622] ReadFile() failed, GetLastError()=0
[358.728] ReadFile() failed, GetLastError()=0
[374.585] ReadFile() failed, GetLastError()=0
[374.688] ReadFile() failed, GetLastError()=0
[386.336] Waiting for firehose to get ready
[390.548] ReadFile() failed, GetLastError()=0
[390.650] ReadFile() failed, GetLastError()=0
[406.516] ReadFile() failed, GetLastError()=0
[406.621] ReadFile() failed, GetLastError()=0
[422.472] ReadFile() failed, GetLastError()=0
[422.572] ReadFile() failed, GetLastError()=0
[438.433] ReadFile() failed, GetLastError()=0
[438.536] ReadFile() failed, GetLastError()=0
[450.166] Waiting for firehose to get ready
[454.392] ReadFile() failed, GetLastError()=0
[454.497] ReadFile() failed, GetLastError()=0
[470.358] ReadFile() failed, GetLastError()=0
[470.461] ReadFile() failed, GetLastError()=0
[486.349] ReadFile() failed, GetLastError()=0
[486.458] ReadFile() failed, GetLastError()=0
[502.281] ReadFile() failed, GetLastError()=0
[502.383] ReadFile() failed, GetLastError()=0
[514.012] Initializing storage
[514.017] Waiting for firehose to get ready
[518.246] ReadFile() failed, GetLastError()=0
[518.347] ReadFile() failed, GetLastError()=0
[534.206] ReadFile() failed, GetLastError()=0
[534.308] ReadFile() failed, GetLastError()=0
[550.170] ReadFile() failed, GetLastError()=0
[550.272] ReadFile() failed, GetLastError()=0
[566.135] ReadFile() failed, GetLastError()=0
[566.236] ReadFile() failed, GetLastError()=0
[577.864] Configuring device...
[577.866] Waiting for firehose to get ready
[582.096] ReadFile() failed, GetLastError()=0
[582.201] ReadFile() failed, GetLastError()=0
[598.050] ReadFile() failed, GetLastError()=0
[598.151] ReadFile() failed, GetLastError()=0
[614.015] ReadFile() failed, GetLastError()=0
[614.117] ReadFile() failed, GetLastError()=0
[629.975] ReadFile() failed, GetLastError()=0
[630.081] ReadFile() failed, GetLastError()=0
[641.801] Waiting for firehose to get ready
[645.938] ReadFile() failed, GetLastError()=0
[646.042] ReadFile() failed, GetLastError()=0
[661.894] ReadFile() failed, GetLastError()=0
[661.997] ReadFile() failed, GetLastError()=0
[677.852] ReadFile() failed, GetLastError()=0
[677.957] ReadFile() failed, GetLastError()=0
[678.087] ReadFile() failed, GetLastError()=0
[693.811] ReadFile() failed, GetLastError()=0
[693.916] ReadFile() failed, GetLastError()=0
[705.559] Waiting for firehose to get ready
[709.768] ReadFile() failed, GetLastError()=0
[709.870] ReadFile() failed, GetLastError()=0
[725.723] ReadFile() failed, GetLastError()=0
[725.825] ReadFile() failed, GetLastError()=0
[741.682] ReadFile() failed, GetLastError()=0
[741.784] ReadFile() failed, GetLastError()=0
[757.639] ReadFile() failed, GetLastError()=0
[757.741] ReadFile() failed, GetLastError()=0
[769.382] Waiting for firehose to get ready
[773.602] ReadFile() failed, GetLastError()=0
[773.703] ReadFile() failed, GetLastError()=0
[789.566] ReadFile() failed, GetLastError()=0
[789.669] ReadFile() failed, GetLastError()=0
[805.532] ReadFile() failed, GetLastError()=0
[805.637] ReadFile() failed, GetLastError()=0
[821.490] ReadFile() failed, GetLastError()=0
[821.591] ReadFile() failed, GetLastError()=0
[833.223] Waiting for firehose to get ready
[837.447] ReadFile() failed, GetLastError()=0
[837.552] ReadFile() failed, GetLastError()=0
[853.411] ReadFile() failed, GetLastError()=0
[853.511] ReadFile() failed, GetLastError()=0
[869.377] ReadFile() failed, GetLastError()=0
[869.477] ReadFile() failed, GetLastError()=0
[885.332] ReadFile() failed, GetLastError()=0
[885.435] ReadFile() failed, GetLastError()=0
[897.062] Configuring device...
[897.066] Waiting for firehose to get ready
[901.290] ReadFile() failed, GetLastError()=0
[901.393] ReadFile() failed, GetLastError()=0
[917.254] ReadFile() failed, GetLastError()=0
[917.355] ReadFile() failed, GetLastError()=0
[933.214] ReadFile() failed, GetLastError()=0
[933.315] ReadFile() failed, GetLastError()=0
[949.177] ReadFile() failed, GetLastError()=0
[949.279] ReadFile() failed, GetLastError()=0
[960.912] Waiting for firehose to get ready
[965.140] ReadFile() failed, GetLastError()=0
[965.245] ReadFile() failed, GetLastError()=0
[981.092] ReadFile() failed, GetLastError()=0
[981.195] ReadFile() failed, GetLastError()=0
[997.049] ReadFile() failed, GetLastError()=0
[997.151] ReadFile() failed, GetLastError()=0
[1013.017] ReadFile() failed, GetLastError()=0
[1013.118] ReadFile() failed, GetLastError()=0
[1024.734] Waiting for firehose to get ready
[1028.975] ReadFile() failed, GetLastError()=0
[1029.077] ReadFile() failed, GetLastError()=0
[1044.939] ReadFile() failed, GetLastError()=0
[1045.044] ReadFile() failed, GetLastError()=0
[1060.902] ReadFile() failed, GetLastError()=0
[1061.006] ReadFile() failed, GetLastError()=0
[1076.862] ReadFile() failed, GetLastError()=0
[1076.965] ReadFile() failed, GetLastError()=0
[1088.596] Waiting for firehose to get ready
[1092.829] ReadFile() failed, GetLastError()=0
[1092.931] ReadFile() failed, GetLastError()=0
[1108.792] ReadFile() failed, GetLastError()=0
[1108.896] ReadFile() failed, GetLastError()=0
[1124.756] ReadFile() failed, GetLastError()=0
[1124.857] ReadFile() failed, GetLastError()=0
[1140.720] ReadFile() failed, GetLastError()=0
[1140.824] ReadFile() failed, GetLastError()=0
[1152.450] ERROR: do_package()->do_recipe()->do_configure()->fh_send()->get_fh()->no response
[1152.450] Check qboot_log.txt for more details
[1152.450] Total time: 1152.450s
[1152.450] There were some hiccups in backup and restore.
[1152.451] Please save the following files and see a Bootloader member.
[1152.451] 1) ./qboot_log.txt
[1152.451] 2) ./backup_0xxxx4_2019-09-15_202252.img
[1152.451]
[1152.451]
[1152.451] qboot version 3.85
[1152.451]
[1152.451] DEVICE {
[1152.451] name = "\.\COM6",
[1152.451] flags = "0x64",
[1152.451] addr = "0x28FD74",
[1152.451] sahara.current_mode = "0",
[1152.451] api.buffer = "0x2540020",
[1152.451] cpu.serial = "xxx",
[1152.451] cpu.id = "94",
[1152.451] cpu.sv_sbl = "0",
[1152.451] cpu.name = "MSM8998",
[1152.451] storage.type = "UFS",
[1152.451] sahara.programmer = "programmer.elf",
[1152.451] module.firehose = "0x484800",
[1152.451] cpu.ver = "0",
[1152.451] cpu.vername = "unknown",
[1152.451] api.bnr = "0x496110",
[1152.451] }
[1152.451]
[1152.451]
[1152.451] Backup & Restore {
[1152.451] num_entries = 31,
[1152.451] restoring = "false",
[1152.451] restore_error = "not started",
[1152.451] entries[00] = { skipped = 0, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="cid"},
[1152.451] entries[01] = { skipped = 0, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="frp"},
[1152.451] entries[02] = { skipped = 0, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="hw"},
[1152.451] entries[03] = { skipped = 0, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="misc"},
[1152.451] entries[04] = { skipped = 0, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="persist"},
[1152.451] entries[05] = { skipped = 0, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="utags"},
[1152.451] entries[06] = { skipped = 0, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="devinfo"},
[1152.451] entries[07] = { skipped = 1, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="abl_a"},
[1152.451] entries[08] = { skipped = 1, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="cmnlib_a"},
[1152.451] entries[09] = { skipped = 1, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="cmnlib64_a"},
[1152.451] entries[10] = { skipped = 1, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="devcfg_a"},
[1152.451] entries[11] = { skipped = 1, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="hyp_a"},
[1152.451] entries[12] = { skipped = 1, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="keymaster_a"},
[1152.451] entries[13] = { skipped = 1, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="tz_a"},
[1152.451] entries[14] = { skipped = 1, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="storsec_a"},
[1152.451] entries[15] = { skipped = 1, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="prov_a"},
[1152.451] entries[16] = { skipped = 1, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="rpm_a"},
[1152.451] entries[17] = { skipped = 1, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="pmic_a"},
[1152.451] entries[18] = { skipped = 1, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="xbl_a"},
[1152.451] entries[19] = { skipped = 1, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="abl_b"},
[1152.451] entries[20] = { skipped = 1, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="cmnlib_b"},
[1152.451] entries[21] = { skipped = 1, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="cmnlib64_b"},
[1152.451] entries[22] = { skipped = 1, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="devcfg_b"},
[1152.451] entries[23] = { skipped = 1, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="hyp_b"},
[1152.451] entries[24] = { skipped = 1, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="keymaster_b"},
[1152.451] entries[25] = { skipped = 1, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="tz_b"},
[1152.451] entries[26] = { skipped = 1, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="storsec_b"},
[1152.451] entries[27] = { skipped = 1, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="prov_b"},
[1152.451] entries[28] = { skipped = 1, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="rpm_b"},
[1152.451] entries[29] = { skipped = 1, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="pmic_b"},
[1152.451] entries[30] = { skipped = 1, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="xbl_b"},
[1152.451] simg = {
[1152.451] filename = "backup_0xxxx_2019-09-15_202252.img",
[1152.451] entries[00] = { size = 557888, name = "programmer.elf" },
[1152.451] }
[1152.451] }
[1152.451]
Anyone any ideas what the problem is? It's a german unbranded model.
In your device manager does your Z2 Force show up as Qualcomm 9008?
Have you tried switching USB cables?
Have you tried switching USB ports on your PC?
Is your bootloader unlocked? Did you get the unlock code from Moto?
When you were attempting to root your device, did you fastboot boot TWRP to flash the installer zip?
Sent from my Z2 Force using XDA Labs
Click to expand...
Click to collapse
fast69mopar said:
BrickingsSoFunny said:
I tried to root my phone some time ago. In the middle of the process somewhere the screen went black and nothing worked anymore, maybe I followed the wrong Thread for this.
I could connect to Qualcom and tried all blank-flashes.bat I've found. All ended up with errors e. g.
**** Log buffer [000001] 2019-09-15_20:19:37 ****
[ 0.000] Opening device: \.\COM6
[ 0.002] Detecting device
[ 0.005] ...cpu.id = 94 (0x5e)
[ 0.006] ...cpu.sn = xxx
[ 0.006] Opening singleimage
[ 0.007] Loading package
[ 0.013] ...filename = pkg.xml
[ 0.017] Loading programmer
[ 0.018] ...filename = programmer.elf
[ 0.018] Sending programmer
[ 0.177] Handling things over to programmer
[ 0.177] Identifying CPU version
[ 0.182] Waiting for firehose to get ready
[ 23.429] ReadFile() failed, GetLastError()=0
[ 23.532] ReadFile() failed, GetLastError()=0
[ 39.398] ReadFile() failed, GetLastError()=0
[ 39.504] ReadFile() failed, GetLastError()=0
[ 55.362] ReadFile() failed, GetLastError()=0
[ 55.468] ReadFile() failed, GetLastError()=0
[ 67.097] Waiting for firehose to get ready
[ 71.316] ReadFile() failed, GetLastError()=0
[ 71.418] ReadFile() failed, GetLastError()=0
[ 87.270] ReadFile() failed, GetLastError()=0
[ 87.375] ReadFile() failed, GetLastError()=0
[103.226] ReadFile() failed, GetLastError()=0
[103.327] ReadFile() failed, GetLastError()=0
[119.189] ReadFile() failed, GetLastError()=0
[119.291] ReadFile() failed, GetLastError()=0
[130.938] ...MSM8998 unknown
[130.941] Determining target secure state
[130.951] Waiting for firehose to get ready
[135.151] ReadFile() failed, GetLastError()=0
[135.253] ReadFile() failed, GetLastError()=0
[151.103] ReadFile() failed, GetLastError()=0
[151.208] ReadFile() failed, GetLastError()=0
[167.066] ReadFile() failed, GetLastError()=0
[167.170] ReadFile() failed, GetLastError()=0
[183.034] ReadFile() failed, GetLastError()=0
[183.137] ReadFile() failed, GetLastError()=0
[194.774] ...secure = no
[194.859] Initializing storage
[194.863] Waiting for firehose to get ready
[199.003] ReadFile() failed, GetLastError()=0
[199.106] ReadFile() failed, GetLastError()=0
[214.970] ReadFile() failed, GetLastError()=0
[215.070] ReadFile() failed, GetLastError()=0
[230.931] ReadFile() failed, GetLastError()=0
[231.033] ReadFile() failed, GetLastError()=0
[246.885] ReadFile() failed, GetLastError()=0
[246.986] ReadFile() failed, GetLastError()=0
[258.618] Configuring device...
[258.627] Waiting for firehose to get ready
[262.845] ReadFile() failed, GetLastError()=0
[262.947] ReadFile() failed, GetLastError()=0
[278.805] ReadFile() failed, GetLastError()=0
[278.909] ReadFile() failed, GetLastError()=0
[294.770] ReadFile() failed, GetLastError()=0
[294.871] ReadFile() failed, GetLastError()=0
[310.733] ReadFile() failed, GetLastError()=0
[310.834] ReadFile() failed, GetLastError()=0
[322.475] Waiting for firehose to get ready
[326.694] ReadFile() failed, GetLastError()=0
[326.795] ReadFile() failed, GetLastError()=0
[342.660] ReadFile() failed, GetLastError()=0
[342.762] ReadFile() failed, GetLastError()=0
[358.622] ReadFile() failed, GetLastError()=0
[358.728] ReadFile() failed, GetLastError()=0
[374.585] ReadFile() failed, GetLastError()=0
[374.688] ReadFile() failed, GetLastError()=0
[386.336] Waiting for firehose to get ready
[390.548] ReadFile() failed, GetLastError()=0
[390.650] ReadFile() failed, GetLastError()=0
[406.516] ReadFile() failed, GetLastError()=0
[406.621] ReadFile() failed, GetLastError()=0
[422.472] ReadFile() failed, GetLastError()=0
[422.572] ReadFile() failed, GetLastError()=0
[438.433] ReadFile() failed, GetLastError()=0
[438.536] ReadFile() failed, GetLastError()=0
[450.166] Waiting for firehose to get ready
[454.392] ReadFile() failed, GetLastError()=0
[454.497] ReadFile() failed, GetLastError()=0
[470.358] ReadFile() failed, GetLastError()=0
[470.461] ReadFile() failed, GetLastError()=0
[486.349] ReadFile() failed, GetLastError()=0
[486.458] ReadFile() failed, GetLastError()=0
[502.281] ReadFile() failed, GetLastError()=0
[502.383] ReadFile() failed, GetLastError()=0
[514.012] Initializing storage
[514.017] Waiting for firehose to get ready
[518.246] ReadFile() failed, GetLastError()=0
[518.347] ReadFile() failed, GetLastError()=0
[534.206] ReadFile() failed, GetLastError()=0
[534.308] ReadFile() failed, GetLastError()=0
[550.170] ReadFile() failed, GetLastError()=0
[550.272] ReadFile() failed, GetLastError()=0
[566.135] ReadFile() failed, GetLastError()=0
[566.236] ReadFile() failed, GetLastError()=0
[577.864] Configuring device...
[577.866] Waiting for firehose to get ready
[582.096] ReadFile() failed, GetLastError()=0
[582.201] ReadFile() failed, GetLastError()=0
[598.050] ReadFile() failed, GetLastError()=0
[598.151] ReadFile() failed, GetLastError()=0
[614.015] ReadFile() failed, GetLastError()=0
[614.117] ReadFile() failed, GetLastError()=0
[629.975] ReadFile() failed, GetLastError()=0
[630.081] ReadFile() failed, GetLastError()=0
[641.801] Waiting for firehose to get ready
[645.938] ReadFile() failed, GetLastError()=0
[646.042] ReadFile() failed, GetLastError()=0
[661.894] ReadFile() failed, GetLastError()=0
[661.997] ReadFile() failed, GetLastError()=0
[677.852] ReadFile() failed, GetLastError()=0
[677.957] ReadFile() failed, GetLastError()=0
[678.087] ReadFile() failed, GetLastError()=0
[693.811] ReadFile() failed, GetLastError()=0
[693.916] ReadFile() failed, GetLastError()=0
[705.559] Waiting for firehose to get ready
[709.768] ReadFile() failed, GetLastError()=0
[709.870] ReadFile() failed, GetLastError()=0
[725.723] ReadFile() failed, GetLastError()=0
[725.825] ReadFile() failed, GetLastError()=0
[741.682] ReadFile() failed, GetLastError()=0
[741.784] ReadFile() failed, GetLastError()=0
[757.639] ReadFile() failed, GetLastError()=0
[757.741] ReadFile() failed, GetLastError()=0
[769.382] Waiting for firehose to get ready
[773.602] ReadFile() failed, GetLastError()=0
[773.703] ReadFile() failed, GetLastError()=0
[789.566] ReadFile() failed, GetLastError()=0
[789.669] ReadFile() failed, GetLastError()=0
[805.532] ReadFile() failed, GetLastError()=0
[805.637] ReadFile() failed, GetLastError()=0
[821.490] ReadFile() failed, GetLastError()=0
[821.591] ReadFile() failed, GetLastError()=0
[833.223] Waiting for firehose to get ready
[837.447] ReadFile() failed, GetLastError()=0
[837.552] ReadFile() failed, GetLastError()=0
[853.411] ReadFile() failed, GetLastError()=0
[853.511] ReadFile() failed, GetLastError()=0
[869.377] ReadFile() failed, GetLastError()=0
[869.477] ReadFile() failed, GetLastError()=0
[885.332] ReadFile() failed, GetLastError()=0
[885.435] ReadFile() failed, GetLastError()=0
[897.062] Configuring device...
[897.066] Waiting for firehose to get ready
[901.290] ReadFile() failed, GetLastError()=0
[901.393] ReadFile() failed, GetLastError()=0
[917.254] ReadFile() failed, GetLastError()=0
[917.355] ReadFile() failed, GetLastError()=0
[933.214] ReadFile() failed, GetLastError()=0
[933.315] ReadFile() failed, GetLastError()=0
[949.177] ReadFile() failed, GetLastError()=0
[949.279] ReadFile() failed, GetLastError()=0
[960.912] Waiting for firehose to get ready
[965.140] ReadFile() failed, GetLastError()=0
[965.245] ReadFile() failed, GetLastError()=0
[981.092] ReadFile() failed, GetLastError()=0
[981.195] ReadFile() failed, GetLastError()=0
[997.049] ReadFile() failed, GetLastError()=0
[997.151] ReadFile() failed, GetLastError()=0
[1013.017] ReadFile() failed, GetLastError()=0
[1013.118] ReadFile() failed, GetLastError()=0
[1024.734] Waiting for firehose to get ready
[1028.975] ReadFile() failed, GetLastError()=0
[1029.077] ReadFile() failed, GetLastError()=0
[1044.939] ReadFile() failed, GetLastError()=0
[1045.044] ReadFile() failed, GetLastError()=0
[1060.902] ReadFile() failed, GetLastError()=0
[1061.006] ReadFile() failed, GetLastError()=0
[1076.862] ReadFile() failed, GetLastError()=0
[1076.965] ReadFile() failed, GetLastError()=0
[1088.596] Waiting for firehose to get ready
[1092.829] ReadFile() failed, GetLastError()=0
[1092.931] ReadFile() failed, GetLastError()=0
[1108.792] ReadFile() failed, GetLastError()=0
[1108.896] ReadFile() failed, GetLastError()=0
[1124.756] ReadFile() failed, GetLastError()=0
[1124.857] ReadFile() failed, GetLastError()=0
[1140.720] ReadFile() failed, GetLastError()=0
[1140.824] ReadFile() failed, GetLastError()=0
[1152.450] ERROR: do_package()->do_recipe()->do_configure()->fh_send()->get_fh()->no response
[1152.450] Check qboot_log.txt for more details
[1152.450] Total time: 1152.450s
[1152.450] There were some hiccups in backup and restore.
[1152.451] Please save the following files and see a Bootloader member.
[1152.451] 1) ./qboot_log.txt
[1152.451] 2) ./backup_0xxxx4_2019-09-15_202252.img
[1152.451]
[1152.451]
[1152.451] qboot version 3.85
[1152.451]
[1152.451] DEVICE {
[1152.451] name = "\.\COM6",
[1152.451] flags = "0x64",
[1152.451] addr = "0x28FD74",
[1152.451] sahara.current_mode = "0",
[1152.451] api.buffer = "0x2540020",
[1152.451] cpu.serial = "xxx",
[1152.451] cpu.id = "94",
[1152.451] cpu.sv_sbl = "0",
[1152.451] cpu.name = "MSM8998",
[1152.451] storage.type = "UFS",
[1152.451] sahara.programmer = "programmer.elf",
[1152.451] module.firehose = "0x484800",
[1152.451] cpu.ver = "0",
[1152.451] cpu.vername = "unknown",
[1152.451] api.bnr = "0x496110",
[1152.451] }
[1152.451]
[1152.451]
[1152.451] Backup & Restore {
[1152.451] num_entries = 31,
[1152.451] restoring = "false",
[1152.451] restore_error = "not started",
[1152.451] entries[00] = { skipped = 0, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="cid"},
[1152.451] entries[01] = { skipped = 0, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="frp"},
[1152.451] entries[02] = { skipped = 0, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="hw"},
[1152.451] entries[03] = { skipped = 0, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="misc"},
[1152.451] entries[04] = { skipped = 0, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="persist"},
[1152.451] entries[05] = { skipped = 0, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="utags"},
[1152.451] entries[06] = { skipped = 0, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="devinfo"},
[1152.451] entries[07] = { skipped = 1, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="abl_a"},
[1152.451] entries[08] = { skipped = 1, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="cmnlib_a"},
[1152.451] entries[09] = { skipped = 1, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="cmnlib64_a"},
[1152.451] entries[10] = { skipped = 1, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="devcfg_a"},
[1152.451] entries[11] = { skipped = 1, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="hyp_a"},
[1152.451] entries[12] = { skipped = 1, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="keymaster_a"},
[1152.451] entries[13] = { skipped = 1, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="tz_a"},
[1152.451] entries[14] = { skipped = 1, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="storsec_a"},
[1152.451] entries[15] = { skipped = 1, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="prov_a"},
[1152.451] entries[16] = { skipped = 1, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="rpm_a"},
[1152.451] entries[17] = { skipped = 1, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="pmic_a"},
[1152.451] entries[18] = { skipped = 1, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="xbl_a"},
[1152.451] entries[19] = { skipped = 1, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="abl_b"},
[1152.451] entries[20] = { skipped = 1, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="cmnlib_b"},
[1152.451] entries[21] = { skipped = 1, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="cmnlib64_b"},
[1152.451] entries[22] = { skipped = 1, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="devcfg_b"},
[1152.451] entries[23] = { skipped = 1, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="hyp_b"},
[1152.451] entries[24] = { skipped = 1, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="keymaster_b"},
[1152.451] entries[25] = { skipped = 1, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="tz_b"},
[1152.451] entries[26] = { skipped = 1, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="storsec_b"},
[1152.451] entries[27] = { skipped = 1, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="prov_b"},
[1152.451] entries[28] = { skipped = 1, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="rpm_b"},
[1152.451] entries[29] = { skipped = 1, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="pmic_b"},
[1152.451] entries[30] = { skipped = 1, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="xbl_b"},
[1152.451] simg = {
[1152.451] filename = "backup_0xxxx_2019-09-15_202252.img",
[1152.451] entries[00] = { size = 557888, name = "programmer.elf" },
[1152.451] }
[1152.451] }
[1152.451]
Anyone any ideas what the problem is? It's a german unbranded model.
In your device manager does your Z2 Force show up as Qualcomm 9008?
Have you tried switching USB cables?
Have you tried switching USB ports on your PC?
Is your bootloader unlocked? Did you get the unlock code from Moto?
When you were attempting to root your device, did you fastboot boot TWRP to flash the installer zip?
Sent from my Z2 Force using XDA Labs
Click to expand...
Click to collapse
Hello,
thanks for you answer.
I tried from different PCs Windows and Linux, I think I also tried different cables on the different machines. Not sure, maybe I should try another cable. But I have two. Not sure, if I used only one or two.
I always had "Sahara" errors... not all that long as the one above.
And yes I had the code from Motorola and the bootloader was unlocked properly. I had also TWRP installed and extracted one of the final ZIPs on the Motorola..
It's been Months ago, so I don't remember exactly, which it was.
Click to expand...
Click to collapse
You r not using USB 3.0 right...?
Dany XP said:
You r not using USB 3.0 right...?
Click to expand...
Click to collapse
Exactly. Do you also think it's an USB problem, altough the phone is recognized?
https://forum.xda-developers.com/showpost.php?p=77623934&postcount=5
BrickingsSoFunny said:
Exactly. Do you also think it's an USB problem, altough the phone is recognized?
Click to expand...
Click to collapse
If you are using USB 3.0, that's your problem. I had the same problem too, even if I could "fastboot devices" successfully. Besides that command, I couldn't do basically any flashing...
41rw4lk said:
https://forum.xda-developers.com/showpost.php?p=77623934&postcount=5
Click to expand...
Click to collapse
Thank you both for your answers.
I found the above thread before and followed it.
I tried 2 different machines. One new Linux Machine Centos 7 and an older Windows 7 Machine, on *all* USB Ports (some USB 3, some USB 2) with 2 different OEM Cables from the original Z2 Kit.
The result is always the same. An error. Last result is from Linux machine:
[[email protected]]# ./blank-flash.sh
Motorola qboot utility version 3.85
[ 0.000] Opening device: /dev/ttyUSB0
[ 0.000] Detecting device
[ 0.003] ...cpu.id = 94 (0x5e)
[ 0.003] ...cpu.sn = 31xxx
[ 0.003] Opening singleimage
[ 0.003] Loading package
[ 0.006] ...filename = pkg.xml
[ 0.008] Loading programmer
[ 0.008] ...filename = programmer.elf
[ 0.008] Sending programmer
[ 0.141] Handling things over to programmer
[ 0.141] Identifying CPU version
[ 0.144] Waiting for firehose to get ready
[ 5.687] Target NAK!
[ 5.687] ...fh.attrs.Verbose is set to 0
[ 5.687] ...Chip serial num: 4xxx
[ 5.687] ...Supported Functions: program configure nop getvar dump firmwarewrite patch setbootablestoragedrive ufs emmc power benchmark read getstorageinfo getsha256digest erase peek poke
[ 5.687] ...ERROR: XML not formed correctly. Expected a < character at loc 0
[ 8.688] Target NAK!
[ 8.688] ...fh.attrs.Verbose is set to 0
[ 8.688] ...Chip serial num: 4xxx
[ 8.688] ...Supported Functions: program configure nop getvar dump firmwarewrite patch setbootablestoragedrive ufs emmc power benchmark read getstorageinfo getsha256digest erase peek poke
[ 8.688] ...ERROR: XML not formed correctly. Expected a < character at loc 0
[ 11.688] Target NAK!
[ 11.688] ...fh.attrs.Verbose is set to 0
[ 11.688] ...Chip serial num: 4xxx
[ 11.688] ...Supported Functions: program configure nop getvar dump firmwarewrite patch setbootablestoragedrive ufs emmc power benchmark read getstorageinfo getsha256digest erase peek poke
[ 11.688] ...ERROR: XML not formed correctly. Expected a < character at loc 0
Maybe I've got a general problem, I didn't see?
1. I download the ZIP from the mentioned thread blankflash_from_NDX26.183-15_17.zip
2. I extract it and go to the directory
3. I start the blank-flash.sh or blank-flash.bat (without any options)
4. I connect my phone. On windows it ist at once recognized an the blankflash starts... on linux it takes some tries but it is on most ports properly recognized then the procedure starts (see above)
5. I'm stuck in various errors.
Any help would be appreciated.
I've never ran it on linux, just win7. I would suggest uninstalling all moto and qualcomm drivers. Reboot your pc. Install both drivers again and reboot. Connect your phone and give it time to recognize your device, install, and settle. Run the blankflash.bat as an admin. If that doesn't work, unplug the phone, start blankflash, hold vol dwn and replug and wait for the process to start. If no luck still, move to another usb port and try again. Some people have had only one usb port that would work for them, some had to use a whole other machine. This phone is *****y about ports.
41rw4lk said:
I've never ran it on linux, just win7. I would suggest uninstalling all moto and qualcomm drivers. Reboot your pc. Install both drivers again and reboot. Connect your phone and give it time to recognize your device, install, and settle. Run the blankflash.bat as an admin. If that doesn't work, unplug the phone, start blankflash, hold vol dwn and replug and wait for the process to start. If no luck still, move to another usb port and try again. Some people have had only one usb port that would work for them, some had to use a whole other machine. This phone is *****y about ports.
Click to expand...
Click to collapse
You both were right. Seemed to be a connection problem, running the DOS-prompt as Administrator did the trick. Thank you for your patience.
So meanwhile my Z2 Force shows a booting screen again.
----------------------------------
Update:
Meanwhile I installed Lineage OS Recovery and tried to flash latest Version (arm64) lineage-16.0-20190923-nightly-nash-signed.zip
Result: After ADB sideloading the zip, the phone is bricked again.
Same using TWRP. Another hint?
Thank you and best regards!
I got the same bricked issue. Have tried both nougat and oreo blankflashes,changing PC,changing cables,changing ports and all was failed. I attached logs from both blankflashes.
Just flash pie -19 version on both slots, erase modemst 1 and 2 and boot one time to official Pie. Here it has worked, but I don't know why. Maybe it's needed first boot Pie, then erase modemst 1 and 2 again and then boot again to Pie. I would say you have to test it out. That is, what I can say to help. Hope it helps.
huatz84 said:
I got the same bricked issue. Have tried both nougat and oreo blankflashes,changing PC,changing cables,changing ports and all was failed. I attached logs from both blankflashes.
Click to expand...
Click to collapse
I installed the blankflash from
https://forum.xda-developers.com/showpost.php?p=77623934&postcount=5
Running the DOS-Prompt as Administrator
Start-Button -> type "cmd" then press Strg+Shift+Enter
did the trick, after that the script works fine.
Since I got various Errors from all the same problem, I think it is mostly USB Connection or a permission problem.
BrickingsSoFunny said:
I installed the blankflash from
https://forum.xda-developers.com/showpost.php?p=77623934&postcount=5
Running the DOS-Prompt as Administrator
Start-Button -> type "cmd" then press Strg+Shift+Enter
did the trick, after that the script works fine.
Since I got various Errors from all the same problem, I think it is mostly USB Connection or a permission problem.
Click to expand...
Click to collapse
I have tried running as administrator on both of my PCs. Using different cable and I even have used Xiaomi deep flash cable which I used to use to boot edl on Xiaomi devices. Nothing worked. I've switched to Realme 3 Pro. But, I still keep my Z2 Force and I'm waiting for a method to revive it.
Sent from my RMX1851 using XDA Labs
no blankflash available for Pie?
portox said:
no blankflash available for Pie?
Click to expand...
Click to collapse
I'm also waiting for it since both blankflashes failed on my Z2 Force.
Related
Just got a XT1789-01 from a friend whos daughters phone just abruptly stopped working. No signs of life, except when plugged in to a computer I see the QLoader 9008 driver load. I tried some blank flash that says to bring the booloader back but it did nothing but say Generic Error. The tool does seem to detect the phone though.
Any ideas? The girl that uses this phone is like 10 so I know its not been tampered with software wise to cause this.
Motorola devices are not my cup of tea when it comes to flashing.
Thanks!
https://forum.xda-developers.com/showpost.php?p=76850077&postcount=6
At the bottom of the post is a link for qualcomm diag drivers, signed for windows.
Attached is the unbrick.zip, use the drivers mentioned above though. Basically unplug your phone and install the drivers, reboot pc and plug in, wait for the drivers to recognize and settle, then blankflash. Afterwards you'll be in a clean bootloader. Flash the latest firmware for your variant. This thread has instructions and links for flashing firmwares, just make sure it's for your variant. You can also try using the lmsa tool mentioned in post #275 to flash the firmware needed.
41rw4lk said:
https://forum.xda-developers.com/showpost.php?p=76850077&postcount=6
At the bottom of the post is a link for qualcomm diag drivers, signed for windows.
Attached is the unbrick.zip, use the drivers mentioned above though. Basically unplug your phone and install the drivers, reboot pc and plug in, wait for the drivers to recognize and settle, then blankflash. Afterwards you'll be in a clean bootloader. Flash the latest firmware for your variant. This thread has instructions and links for flashing firmwares, just make sure it's for your variant. You can also try using the lmsa tool mentioned in post #275 to flash the firmware needed.
Click to expand...
Click to collapse
Thanks. But I still get "FAILED General error" on the blank flash.
C:\1>.\qboot.exe blank-flash
Motorola qboot utility version 3.85
[ -0.000] Opening device: \\.\COM4
[ 0.001] Detecting device
[ 0.004] ...cpu.id = 94 (0x5e)
[ 0.004] ...cpu.sn = 3695693525 (0xdc47ced5)
[ 0.004] Opening singleimage
[ 0.005] Loading package
[ 0.007] ...filename = pkg.xml
[ 0.008] Loading programmer
[ 0.008] ...filename = programmer.elf
[ 0.008] Sending programmer
[ 0.016] ReadFile() failed, GetLastError()=0
[ 0.342] Unexpected command, expecting 3 or 18 or 4, got 1 instead.
[ 0.344] ERROR: sahara_download()->general error
[ 0.344] Check qboot_log.txt for more details
[ 0.345] Total time: 0.346s
FAILED: qb_flash_singleimage()->sahara_download()->general error
C:\1>pause
Press any key to continue . . .
hyelton said:
Thanks. But I still get "FAILED General error" on the blank flash.
C:\1>.\qboot.exe blank-flash
Motorola qboot utility version 3.85
[ -0.000] Opening device: \\.\COM4
[ 0.001] Detecting device
[ 0.004] ...cpu.id = 94 (0x5e)
[ 0.004] ...cpu.sn = 3695693525 (0xdc47ced5)
[ 0.004] Opening singleimage
[ 0.005] Loading package
[ 0.007] ...filename = pkg.xml
[ 0.008] Loading programmer
[ 0.008] ...filename = programmer.elf
[ 0.008] Sending programmer
[ 0.016] ReadFile() failed, GetLastError()=0
[ 0.342] Unexpected command, expecting 3 or 18 or 4, got 1 instead.
[ 0.344] ERROR: sahara_download()->general error
[ 0.344] Check qboot_log.txt for more details
[ 0.345] Total time: 0.346s
FAILED: qb_flash_singleimage()->sahara_download()->general error
C:\1>pause
Press any key to continue . . .
Click to expand...
Click to collapse
Try holding pwr+vol down, then execute the bat file
Same exact error
hyelton said:
Same exact error
Click to expand...
Click to collapse
I've only had to use that once and I didn't run into problems. Double check that the right driver is installed in your device manager, make sure you're running admin prompt (best from the folder so the path is all set). Try executing the command then plug in your phone. Make sure you're using a 2.0 usb port off the mobo and not a hub or 3+ port. Outside of those suggestions I can't help, I don't know the error correlation. I know some had issues getting to to go, but ultimately it was "things just clicked and worked this time" scenario.
The post where you got the drivers has links to unbricking guides, check those if needed.
41rw4lk said:
I've only had to use that once and I didn't run into problems. Double check that the right driver is installed in your device manager, make sure you're running admin prompt (best from the folder so the path is all set). Try executing the command then plug in your phone. Make sure you're using a 2.0 usb port off the mobo and not a hub or 3+ port. Outside of those suggestions I can't help, I don't know the error correlation. I know some had issues getting to to go, but ultimately it was "things just clicked and worked this time" scenario.
The post where you got the drivers has links to unbricking guides, check those if needed.
Click to expand...
Click to collapse
Yeah drivers are correct, laptop and desktop both usb 2.0 and 3.0 has been tried. Different usb cables, I’m assuming something has went wrong with this phone. As it’s never been tampered with. So I’ll give it a few more goes before giving up on it.
Sent from my iPhone using Tapatalk
which blank flash did you try N or O?
Same here, I think we need an updated blankflash
**** Log buffer [000001] 2019-03-14_20:10:40 ****
[ 0.000] Opening device: \\.\COM3
[ 0.004] Detecting device
[ 0.008] ...cpu.id = 94 (0x5e)
[ 0.008] ...cpu.sn = 4062057235 (0xf21e1313)
[ 0.009] Opening singleimage
[ 0.015] Loading package
[ 0.027] ...filename = pkg.xml
[ 0.037] Loading programmer
[ 0.040] ...filename = programmer.elf
[ 0.040] Sending programmer
[ 0.100] ReadFile() failed, GetLastError()=0
[ 0.370] Unexpected command, expecting 3 or 18 or 4, got 1 instead.
[ 0.454] ERROR: sahara_download()->general error
[ 0.457] Check qboot_log.txt for more details
[ 0.475] Total time: 0.489s
[ 0.485]
[ 0.485] qboot version 3.85
[ 0.485]
[ 0.485] DEVICE {
[ 0.485] name = "\\.\COM3",
[ 0.485] flags = "0x64",
[ 0.485] addr = "0x28FD64",
[ 0.485] sahara.current_mode = "0",
[ 0.485] api.buffer = "0x2525020",
[ 0.485] cpu.serial = "4062057235",
[ 0.485] cpu.id = "94",
[ 0.485] cpu.sv_sbl = "15",
[ 0.485] cpu.name = "MSM8998",
[ 0.485] storage.type = "UFS",
[ 0.485] sahara.programmer = "programmer.elf",
[ 0.485] api.bnr = "0x475FF8",
[ 0.485] }
[ 0.485]
[ 0.485]
[ 0.485] Backup & Restore {
[ 0.485] num_entries = 0,
[ 0.485] restoring = "false",
[ 0.485] backup_error = "not started",
[ 0.485] restore_error = "not started",
[ 0.485] }
[ 0.485]
Same problem here!
I think that I need some updated blankflash files. I have tried to found in 4PDA, but the link was removed, the file name was "blankflash_SPRINT_8.0.0_OCXS27.109-48-6.zip" or " blankflash_VZW_8.0.0_ODXS27.109-34-12_12.zip". I have a xt1789-05, dual sim, but I think these files can save me! Anyone have these files? Thanks.
i have this error, can you help me?
[ 0.000] Opening device: \\.\COM5
[ 0.000] ERROR: device_open()->error opening device
[ 0.000] Check qboot_log.txt for more details
[ 0.000] Total time: 0.001s
[ 0.001]
[ 0.001] qboot version 3.85
[ 0.001]
[ 0.001] DEVICE {
[ 0.001] name = "\\.\COM5",
[ 0.001] flags = "0x60",
[ 0.001] addr = "0x62FD54",
[ 0.001] api.bnr = "0x1D2D70",
[ 0.001] }
[ 0.001]
[ 0.001]
[ 0.001] Backup & Restore {
[ 0.001] num_entries = 0,
[ 0.001] restoring = "false",
[ 0.001] backup_error = "not started",
[ 0.001] restore_error = "not started",
[ 0.001] }
[ 0.001]
XxeAgLeAnGeLxX said:
i have this error, can you help me?
[ 0.000] Opening device: \\.\COM5
[ 0.000] ERROR: device_open()->error opening device
[ 0.000] Check qboot_log.txt for more details
[ 0.000] Total time: 0.001s
[ 0.001]
[ 0.001] qboot version 3.85
[ 0.001]
[ 0.001] DEVICE {
[ 0.001] name = "\\.\COM5",
[ 0.001] flags = "0x60",
[ 0.001] addr = "0x62FD54",
[ 0.001] api.bnr = "0x1D2D70",
[ 0.001] }
[ 0.001]
[ 0.001]
[ 0.001] Backup & Restore {
[ 0.001] num_entries = 0,
[ 0.001] restoring = "false",
[ 0.001] backup_error = "not started",
[ 0.001] restore_error = "not started",
[ 0.001] }
[ 0.001]
Click to expand...
Click to collapse
I was experiencing this exact same issue when running the blankflash. I ran it several times only to receive the same error over and over.
Did you put your device into EDL Mode or did it happen after a bad flash?
Do you know if your bootloader is still intact? Do you know how to exit EDL Mode to get back to the bootloader?
Here is what you do...
Since you are in EDL Mode trying to run the blankflash, get everything set up like you are about to run the blankflash again. Connect your device and verify it is connected in the Device Manager. Press and Hold Volume Down + Power and double-click the file to run the blankflash. Continue holding the Volume Down + Power while attempting to run the blankflash and if your bootloader is still intact this will take you back into the bootloader. It may take a few attempts to get back. Just keep holding the Volume Down + Power and double clicking the blankflash file until it takes you back to the bootloader.
Now, this is assuming that your bootloader is still intact. If it is and you can get back to the bootloader then you can run a flash-all for your device that matches the software you were running and get your device back to an operational state. Good luck.
pekenolucas said:
I think that I need some updated blankflash files. I have tried to found in 4PDA, but the link was removed, the file name was "blankflash_SPRINT_8.0.0_OCXS27.109-48-6.zip" or " blankflash_VZW_8.0.0_ODXS27.109-34-12_12.zip". I have a xt1789-05, dual sim, but I think these files can save me! Anyone have these files? Thanks.
Click to expand...
Click to collapse
Follow this guide it has worked for many. Make sure you read it all first, and make sure your phone is in edl mode. Your phone will have a blank screen but you'll see HS-USB QLoader 9008 in your device manager when connected to your pc.
https://forum.xda-developers.com/showpost.php?p=77623934&postcount=5
Blank flash after reomal of battery works
hyelton said:
Just got a XT1789-01 from a friend whos daughters phone just abruptly stopped working. No signs of life, except when plugged in to a computer I see the QLoader 9008 driver load. I tried some blank flash that says to bring the booloader back but it did nothing but say Generic Error. The tool does seem to detect the phone though.
Any ideas? The girl that uses this phone is like 10 so I know its not been tampered with software wise to cause this.
Motorola devices are not my cup of tea when it comes to flashing.
Thanks!
Click to expand...
Click to collapse
Dear remove battery and then blank flash it will work
Hi. Sorry my english)
I bought a phone on Ali. I tried to install LOS16, but after flashing the phone became a black screen and QUSB_BULK.
The phone was Android 8.0.0 retcn.
When I try to restore blankflash_oreo, I get the following errors:
Code:
**** Log buffer [000001] 2019-05-01_23:10:10 ****
[ 0.000] Opening device: \\.\COM7
[ 0.002] Detecting device
[ 0.005] ...cpu.id = 94 (0x5e)
[ 0.005] ...cpu.sn = 2549234984 (0x97f23d28)
[ 0.005] Opening singleimage
[ 0.006] Loading package
[ 0.009] ...filename = pkg.xml
[ 0.011] Loading programmer
[ 0.012] ...filename = programmer.elf
[ 0.012] Sending programmer
[ 0.084] ReadFile() failed, GetLastError()=0
[ 0.390] Unexpected command, expecting 3 or 18 or 4, got 1 instead.
[ 0.390] ERROR: sahara_download()->general error
[ 0.391] Check qboot_log.txt for more details
[ 0.391] Total time: 0.391s
[ 0.391]
[ 0.391] qboot version 3.85
[ 0.391]
[ 0.391] DEVICE {
[ 0.391] name = "\\.\COM7",
[ 0.391] flags = "0x64",
[ 0.391] addr = "0x28FD64",
[ 0.391] sahara.current_mode = "0",
[ 0.391] api.buffer = "0x2145020",
[ 0.391] cpu.serial = "2549234984",
[ 0.391] cpu.id = "94",
[ 0.391] cpu.sv_sbl = "0",
[ 0.391] cpu.name = "MSM8998",
[ 0.391] storage.type = "UFS",
[ 0.391] sahara.programmer = "programmer.elf",
[ 0.391] api.bnr = "0x2085FF8",
[ 0.391] }
[ 0.391]
[ 0.391]
[ 0.391] Backup & Restore {
[ 0.391] num_entries = 0,
[ 0.391] restoring = "false",
[ 0.391] backup_error = "not started",
[ 0.391] restore_error = "not started",
[ 0.391] }
[ 0.391]
Please share blankflash on 1789-05 for 8.0.0
https://forum.xda-developers.com/showpost.php?p=77623934&postcount=5
Thanks, but not work
Code:
F:\1789-05\blankflash_from_NDX26.183-15_17>.\qboot.exe blank-flash
Motorola qboot utility version 3.85
[ 0.000] Opening device: \\.\COM6
[ 0.001] Detecting device
[ 0.004] ...cpu.id = 94 (0x5e)
[ 0.004] ...cpu.sn = 2549234984 (0x97f23d28)
[ 0.004] Opening singleimage
[ 0.005] Loading package
[ 0.008] ...filename = pkg.xml
[ 0.010] Loading programmer
[ 0.011] ...filename = programmer.elf
[ 0.011] Sending programmer
[ 0.164] Handling things over to programmer
[ 0.164] Identifying CPU version
[ 0.166] Waiting for firehose to get ready
[ 29.142] ReadFile() failed, GetLastError()=0
[ 45.246] ReadFile() failed, GetLastError()=0
[141.851] ReadFile() failed, GetLastError()=0
[156.494] Waiting for firehose to get ready
[174.054] ReadFile() failed, GetLastError()=0
[190.155] ReadFile() failed, GetLastError()=0
[206.257] ReadFile() failed, GetLastError()=0
[217.966] ...MSM8998 unknown
[217.966] Determining target secure state
[217.968] Waiting for firehose to get ready
[222.356] ReadFile() failed, GetLastError()=0
Make sure you have the drivers installed, use a 2.0 usb port off the mobo. It can be finicky, so check your cable, check your drivers, use another port. It'll work. Some have had luck by unplugging the phone, starting the script, holding vol dwn, and replugging the phone. It can be finicky, just try it again.
I try more and more, but still not work.
I try: win vista x32, win 8.1 x64, win 10 x 64,
two cables, stock and other,
drivers qualcomm x32 and x64,
desktop and notebook, other port.
I try:
blankflash_from_NDX26.183-15_17
blankflash_oreo
blankflash_SPRINT_8.0.0_OCXS27.109-48-6
I don't know what to try yet.
MarkNsk87 said:
I try more and more, but still not work.
I try: win vista x32, win 8.1 x64, win 10 x 64,
two cables, stock and other,
drivers qualcomm x32 and x64,
desktop and notebook, other port.
I try:
blankflash_from_NDX26.183-15_17
blankflash_oreo
blankflash_SPRINT_8.0.0_OCXS27.109-48-6
I don't know what to try yet.
Click to expand...
Click to collapse
Idk if anyone has been successful using the oreo blankflash, the one I linked to has been used successfully many times, so use that one. Verify that the proper driver is assigned to the phone in your device manager, and make sure you're using an administrator cmd prompt. Might try uninstalling the drivers, reboot pc, reinstall drivers, reboot pc, plug in the phone and let everything recognize and settle, verify drivers in device manager, open admin prompt and go for it with the ndx (nougat) blankflash.
I reinstalled the driver, rebooted and tried to execute the command under the administrator, the log changed a little, but still unsuccessfully
Code:
**** Log buffer [000001] 2019-05-02_13:23:28 ****
[ 0.000] Opening device: \\.\COM3
[ 0.000] Detecting device
[ 12.844] ReadFile() failed, GetLastError()=0
[ 13.372] ...cpu.id = 94 (0x5e)
[ 13.372] ...cpu.sn = 2549234984 (0x97f23d28)
[ 13.372] Opening singleimage
[B][ 13.372] ERROR: error opening singleimage[/B]
[ 13.388] Check qboot_log.txt for more details
[ 13.388] Total time: 13.388s
[ 13.388]
[ 13.388] qboot version 3.85
[ 13.388]
[ 13.388] DEVICE {
[ 13.388] name = "\\.\COM3",
[ 13.388] flags = "0x64",
[ 13.388] addr = "0x28FD64",
[ 13.388] sahara.current_mode = "3",
[ 13.388] api.buffer = "0x25DB020",
[ 13.388] cpu.serial = "2549234984",
[ 13.388] cpu.id = "94",
[ 13.388] cpu.sv_sbl = "0",
[ 13.388] api.bnr = "0x5D2F78",
[ 13.388] }
[ 13.388]
[ 13.388]
[ 13.388] Backup & Restore {
[ 13.388] num_entries = 0,
[ 13.388] restoring = "false",
[ 13.388] backup_error = "not started",
[ 13.388] restore_error = "not started",
[ 13.388] }
[ 13.388]
Blankflash did not work because of the Motorola_Mobile_Drivers_v6.4.0 drivers, I don’t know how they interfere, but because of them there were errors reading the device and the blankflash did not work.
I worked on my body with blankflash_from_NDX26.183-15_17 - and this is a Verizon bout campaign, judging by the information in the bootloader.
Important all have brick: uninstall Motorola_Mobile_Drivers, before you start blankflash!
Don't wory Mark. I think I have the same gold retcn version of 1789-05. I tried flash some versions of LOS 15 and 16, always ends with Qualcomm mode. For me works blankflash from nougat, but only when battery is less than 10%. When my phone is fully charged, when I try blankflash the phone reconnect to pc. Take me a few evenings to figure it out. Works with Motorola drivers and Qualcomm certificate driver installed in the same time.
Now I have stock EU 8.0 and radio from retcn.
Works everything except Smart lock.
Good luck.
Wysłane z mojego Moto Z (2) przy użyciu Tapatalka
I get this error, can someone help me?
[ 0.000] Opening device: \\.\COM7
[ 0.003] Detecting device
[ 0.006] ...cpu.id = 94 (0x5e)
[ 0.007] ...cpu.sn = 2357123697 (0x8c7eda71)
[ 0.007] Opening singleimage
[ 0.008] Loading package
[ 0.013] ...filename = pkg.xml
[ 0.015] Loading programmer
[ 0.017] ...filename = programmer.elf
[ 0.017] Sending programmer
[ 0.181] Handling things over to programmer
[ 0.182] Identifying CPU version
[ 0.185] Waiting for firehose to get ready
[ 3.642] ...MSM8998 2.1
[ 3.804] Determining target secure state
[ 3.987] ...secure = yes
[ 4.334] Configuring device...
[ 4.361] Skipping UFS provsioning as target is secure
[ 4.362] Configuring device...
[ 5.938] Target NAK!
[ 5.939] ...ERROR: Failed to initialize (open whole lun) UFS Device slot 0 partition 1
[ 5.939] ...ERROR: Failed to open the device 3 slot 0 partition 1
[ 5.940] ...INFO: Device type 3, slot 0, partition 1, error 0
[ 5.940] ...WARN: Set bootable failed to open 3 slot 0, partition 1, error 0
[ 5.940] ERROR: do_package()->do_recipe()->NAK
[ 5.942] Check qboot_log.txt for more details
[ 5.943] Total time: 5.946s
FAILED: qb_flash_singleimage()->do_package()->do_recipe()->NAK
Thank you
41rw4lk said:
https://forum.xda-developers.com/showpost.php?p=77623934&postcount=5
Click to expand...
Click to collapse
thanks this method heleped me
you need a blank flash updated for your bootloader, theres at least 5 updates on oreo (OTA UPDATES), then you will need the latest blankflash compatible, maybe the Oreo blank flash that you found here is older than your bricked bootloader. (Sorry for my bad english)
iurd2007 said:
you need a blank flash updated for your bootloader, theres at least 5 updates on oreo (OTA UPDATES), then you will need the latest blankflash compatible, maybe the Oreo blank flash that you found here is older than your bricked bootloader. (Sorry for my bad english)
Click to expand...
Click to collapse
This is a bit of an old post, and I assume those issues are resolved, not sure who you're addressing. As far as oreo blankflash, there is one but as far as I know no one has had success with it. The one that I post frequently uses nougat believe it or not, but it has worked many many times even on oreo and there is no reason to mess with what works. Especially when it comes to blankflashing, it's usually your last chance to resolve the problem.
41rw4lk said:
This is a bit of an old post, and I assume those issues are resolved, not sure who you're addressing. As far as oreo blankflash, there is one but as far as I know no one has had success with it. The one that I post frequently uses nougat believe it or not, but it has worked many many times even on oreo and there is no reason to mess with what works. Especially when it comes to blankflashing, it's usually your last chance to resolve the problem.
Click to expand...
Click to collapse
To blankflash Oreo , you need oreo blankflash, but the last version. There is a oreo (soak test) but not the official stock. But recently someone post the final blankflash for the latest OTA.
iurd2007 said:
To blankflash Oreo , you need oreo blankflash, but the last version. There is a oreo (soak test) but not the official stock. But recently someone post the final blankflash for the latest OTA.
Click to expand...
Click to collapse
You're mistaken. I won't argue the point, by all means do what you will.
41rw4lk said:
You're mistaken. I won't argue the point, by all means do what you will.
Click to expand...
Click to collapse
Ok...
Hi, looking for a kind soul who can provide me with some insight or direction.
My Phone:
Moto Z2 Force XT1789-04 AT&T
Carrier unlocked with unlock code from AT&T to use T-Mobile SIM
Updated to either Build number: OCXS27.109-47-20 or Build number: OCXS27.109-47-23 using LMSA (not OTA)
Official build, never tried to root it
My Circumstance:
I was using fingerprint unlock and my login attempts were failing.
In a brief moment of frustration, and stupidity, I repeatedly retried FP unlock (probably 10+ times)
Display went dim and phone became unresponsive, and ultimately turned into a brick with no way to power on; nothing displayed when plugged in to charge.
My Attempts to Fix:
After trying various button reset options with no success, I plugged my phone into my PC and saw QUSB_BULK
Further searching led me to https://forum.xda-developers.com/showpost.php?p=77623934&postcount=5 (thanks 41rw4lk)
I installed the Qualcomm driver and got Qualcomm HS-USB QDLoader 9008 to show up in Device Manager.
I tried blank-flash.bat using blankflash_from_NDX26.183-15_17 (again, thanks, 41rw4lk)
Here is the output from the batch command:
Code:
c:\Downloads\MOTOZ2FORCE\blankflash_from_NDX26.183-15_17>blank-flash.bat
c:\Downloads\MOTOZ2FORCE\blankflash_from_NDX26.183-15_17>.\qboot.exe blank-flash
Motorola qboot utility version 3.85
[ -0.000] Opening device: \\.\COM4
[ -0.000] Detecting device
[ 0.016] ...cpu.id = 94 (0x5e)
[ 0.016] ...cpu.sn = 1009594148 (0x3c2d2f24)
[ 0.016] Opening singleimage
[ 0.016] Loading package
[ 0.016] ...filename = pkg.xml
[ 0.016] Loading programmer
[ 0.016] ...filename = programmer.elf
[ 0.016] Sending programmer
[ 0.176] Handling things over to programmer
[ 0.176] Identifying CPU version
[ 0.176] Waiting for firehose to get ready
[ 3.200] ...MSM8998 2.1
[ 3.200] Determining target secure state
[ 3.200] ...secure = yes
[ 3.247] Configuring device...
[ 3.263] Skipping UFS provsioning as target is secure
[ 3.263] Configuring device...
[ 4.824] Target NAK!
[ 4.824] ...ERROR: Failed to initialize (open whole lun) UFS Device slot 0 partition 1
[ 4.824] ...ERROR: Failed to open the device 3 slot 0 partition 1
[ 4.824] ...INFO: Device type 3, slot 0, partition 1, error 0
[ 4.824] ...WARN: Set bootable failed to open 3 slot 0, partition 1, error 0
[ 4.824] ERROR: do_package()->do_recipe()->NAK
[ 4.824] Check qboot_log.txt for more details
[ 4.824] Total time: 4.824s
FAILED: qb_flash_singleimage()->do_package()->do_recipe()->NAK
Here is the device info from the log:
Code:
[ 4.824] qboot version 3.85
[ 4.824]
[ 4.824] DEVICE {
[ 4.824] name = "\\.\COM4",
[ 4.824] flags = "0x144",
[ 4.824] addr = "0x62FD54",
[ 4.824] sahara.current_mode = "0",
[ 4.824] api.buffer = "0x29C4020",
[ 4.824] cpu.serial = "1009594148",
[ 4.824] cpu.id = "94",
[ 4.824] cpu.sv_sbl = "0",
[ 4.824] cpu.name = "MSM8998",
[ 4.824] storage.type = "UFS",
[ 4.824] sahara.programmer = "programmer.elf",
[ 4.824] module.firehose = "0x6D91C8",
[ 4.824] api.firehose = "0x721F50",
[ 4.824] cpu.ver = "513",
[ 4.824] cpu.vername = "2.1",
[ 4.824] fh.max_packet_sz = "1048576",
[ 4.824] fh.storage_inited = "1",
[ 4.824] }
So, best as I can decipher, the blank-flash is failing because it cannot create a filesystem on the internal memory.
I read something about A/B slots, but I'm starting to lose my way.
Am I done for?
Thanks for looking. Truly appreciate the folks in this community.
Wait! Am I using a Nougat blank-flash? Do I need an Oreo blank-flash? Is there one available for the XT1789-04?
lobbybee said:
Wait! Am I using a Nougat blank-flash? Do I need an Oreo blank-flash? Is there one available for the XT1789-04?
Click to expand...
Click to collapse
See if there is one on
https://mirrors.lolinet.com/firmware/moto
Sent from my Moto E (4) using Tapatalk
The Nougat blankflash is fine. The phone shipped with a Nougat pbl and the way I understand it is that can't be modified or upgraded, it can be reflashed with the same, but that's it. Don't quote me on that though. As for an Oreo blankflash, there is one, but I've never heard any success stories from it and Nougat has always done the trick.
I've seen that error before, it is speculated that maybe the storage is failing, but I don't know if anyone has ever been able to say 'yes, your storage is no good and that's why you get this error' etc. It maybe very well be the case and I'm not sure if those who have faced that error have been able to recover.
What version of windows are you running? Have you tried running as an admin, using different ports?
If you are on Win10 have you tried going old school and disabling integrity checks and turning test signing on? Win10 isn't very friendly when it comes to our phone, we recommend Win7 and command prompt, not powershell. So if you're using Win10 and haven't done the above, it's worth a shot.
41rw4lk said:
What version of windows are you running? Have you tried running as an admin, using different ports?
Click to expand...
Click to collapse
Previously on Win10 as Admin from CMD window.
Also just tried on Win7, per suggestion, with the same results.
I used 3 different USB2 ports on the PC, iterated through 3 different USB-C cables.
I found the --debug=2 flag for qboot.exe and started digging through the output. Now it's got me wondering:
1) Why is it specifying UFS instead of eMMC? Phonemore.com specs says it's UFS 2.1
2) It appears to be skipping storage initialization because "target is secure." Is blankflash failing b/c my bootloader was not unlocked before it bricked?
3) Should I look into using QFIL to manually configure the reinitialization of the file system, whether UFS or eMMC?
lobbybee said:
Previously on Win10 as Admin from CMD window.
Also just tried on Win7, per suggestion, with the same results.
I used 3 different USB2 ports on the PC, iterated through 3 different USB-C cables.
I found the --debug=2 flag for qboot.exe and started digging through the output. Now it's got me wondering:
1) Why is it specifying UFS instead of eMMC? Phonemore.com specs says it's UFS 2.1
2) It appears to be skipping storage initialization because "target is secure." Is blankflash failing b/c my bootloader was not unlocked before it bricked?
3) Should I look into using QFIL to manually configure the reinitialization of the file system, whether UFS or eMMC?
Click to expand...
Click to collapse
I believe the pbl is loaded before bootloader lock is detected, hence the reason it was able to exploit and unlock booloaders. Obviously we all can agree that something is failing when it comes to initializing the UFS storage it needs to write to. Whether it is corrupted, dead, or something else... I'm not knowledgeable enough to answer that. You might explore around with QFIL since it has an option in settings to select storage type, emmc or ufs. What you do from here on out is all you. I'd make sure you have your drivers installed and do only what is necessary to get back to a bootloader where you can flash a clean stock firmware. Keep us posted with your results and good luck.
Hi,
At the risk of sounding retarded or like I have not searched and read through so many forums I could almost quote them verbatim... I am having trouble unbricking my Moto G7 Play... I've followed dadgum near every guide I've found here and other places... Somewhere along the path to unbricking my device the CPU board ID of my device changed which has a few phone guru friends scratching their heads... Now instead of getting communication errors I am getting the following from the blank-flash.bat when I run it... Maybe I've overlooked the issue in my weeks of searching... Any leads or ideas would be greatly appreciated.
C:\G7PlayBlankFlash>.\qboot.exe blank-flash
Motorola qboot utility version 3.86
[ -0.000] Opening device: \\.\COM5
[ 0.016] Detecting device
[ 17.442] ReadFile() failed, GetLastError()=0
[ 19.255] ...cpu.id = 186 (0xba)
[ 19.255] ...cpu.sn = 1196350551 (0x474edc57)
[ 19.255] Opening singleimage
[ 19.271] Loading package
[ 19.271] Failed identify board. Wrong package?
[ 19.271] ERROR: error loading package
[ 19.286] Check qboot_log.txt for more details
[ 19.286] Total time: 19.286s
FAILED: qb_flash_singleimage()->error loading package
The following is the original device information obtained by LMSA which is the root cause for my phone being bricked in the first place.
[ 11.065] name = "\\.\COM5",
[ 11.065] flags = "0x64",
[ 11.065] addr = "0x62FD54",
[ 11.065] sahara.current_mode = "0",
[ 11.065] api.buffer = "0x29D0020",
[ 11.065] cpu.serial = "255476381",
[ 11.065] cpu.id = "204",
[ 11.065] cpu.sv_sbl = "0",
[ 11.065] cpu.name = "SDM636",
[ 11.065] storage.type = "eMMC",
[ 11.065] sahara.programmer = "programmer.elf",
[ 11.065] api.bnr = "0x2911CA8",
Thanks again in advance for any assistance that could be provided.
Wes Satterwhite
NinjaMonkey1183 said:
Hi,
At the risk of sounding retarded or like I have not searched and read through so many forums I could almost quote them verbatim... I am having trouble unbricking my Moto G7 Play... I've followed dadgum near every guide I've found here and other places... Somewhere along the path to unbricking my device the CPU board ID of my device changed which has a few phone guru friends scratching their heads... Now instead of getting communication errors I am getting the following from the blank-flash.bat when I run it... Maybe I've overlooked the issue in my weeks of searching... Any leads or ideas would be greatly appreciated.
C:\G7PlayBlankFlash>.\qboot.exe blank-flash
Motorola qboot utility version 3.86
[ -0.000] Opening device: \\.\COM5
[ 0.016] Detecting device
[ 17.442] ReadFile() failed, GetLastError()=0
[ 19.255] ...cpu.id = 186 (0xba)
[ 19.255] ...cpu.sn = 1196350551 (0x474edc57)
[ 19.255] Opening singleimage
[ 19.271] Loading package
[ 19.271] Failed identify board. Wrong package?
[ 19.271] ERROR: error loading package
[ 19.286] Check qboot_log.txt for more details
[ 19.286] Total time: 19.286s
FAILED: qb_flash_singleimage()->error loading package
The following is the original device information obtained by LMSA which is the root cause for my phone being bricked in the first place.
[ 11.065] name = "\\.\COM5",
[ 11.065] flags = "0x64",
[ 11.065] addr = "0x62FD54",
[ 11.065] sahara.current_mode = "0",
[ 11.065] api.buffer = "0x29D0020",
[ 11.065] cpu.serial = "255476381",
[ 11.065] cpu.id = "204",
[ 11.065] cpu.sv_sbl = "0",
[ 11.065] cpu.name = "SDM636",
[ 11.065] storage.type = "eMMC",
[ 11.065] sahara.programmer = "programmer.elf",
[ 11.065] api.bnr = "0x2911CA8",
Thanks again in advance for any assistance that could be provided.
Wes Satterwhite
Click to expand...
Click to collapse
It says you're using a snapdragon 636 which, the only device in our family with that CPU is the Moto G7 Plus. Try using the blank flash file for the "Lake". I've attached it below.
Spaceminer said:
It says you're using a snapdragon 636 which, the only device in our family with that CPU is the Moto G7 Plus. Try using the blank flash file for the "Lake". I've attached it below.
Click to expand...
Click to collapse
Still receiving error...
C:\G7PlayBlankFlash>blank-flash.bat
C:\G7PlayBlankFlash>.\qboot.exe blank-flash
Motorola qboot utility version 3.86
[ 0.000] Opening device: \\.\COM5
[ 0.003] Detecting device
[ 24.989] ReadFile() failed, GetLastError()=0
[ 26.743] ...cpu.id = 186 (0xba)
[ 26.754] ...cpu.sn = 1196350551 (0x474edc57)
[ 26.758] Opening singleimage
[ 26.764] Loading package
[ 26.780] Failed identify board. Wrong package?
[ 26.786] ERROR: error loading package
[ 26.795] Check qboot_log.txt for more details
[ 26.803] Total time: 26.805s
FAILED: qb_flash_singleimage()->error loading package
C:\G7PlayBlankFlash>pause
Press any key to continue . . .
C:\G7PlayBlankFlash>
Its as if my cpu id changed and qboot is not recognizing the cpu as snapdragon 636 any longer.
Thanks again,
Wes
NinjaMonkey1183 said:
Still receiving error...
C:\G7PlayBlankFlash>blank-flash.bat
C:\G7PlayBlankFlash>.\qboot.exe blank-flash
Motorola qboot utility version 3.86
[ 0.000] Opening device: \\.\COM5
[ 0.003] Detecting device
[ 24.989] ReadFile() failed, GetLastError()=0
[ 26.743] ...cpu.id = 186 (0xba)
[ 26.754] ...cpu.sn = 1196350551 (0x474edc57)
[ 26.758] Opening singleimage
[ 26.764] Loading package
[ 26.780] Failed identify board. Wrong package?
[ 26.786] ERROR: error loading package
[ 26.795] Check qboot_log.txt for more details
[ 26.803] Total time: 26.805s
FAILED: qb_flash_singleimage()->error loading package
C:\G7PlayBlankFlash>pause
Press any key to continue . . .
C:\G7PlayBlankFlash>
Its as if my cpu id changed and qboot is not recognizing the cpu as snapdragon 636 any longer.
Thanks again,
Wes
Click to expand...
Click to collapse
Try reflashing the bank flash for the G7 Play and see if it works now.
Spaceminer said:
Try reflashing the bank flash for the G7 Play and see if it works now.
Click to expand...
Click to collapse
E:\UNBRICK G7 Play\blankflashg7play\blankflash>.\qboot.exe blank-flash
< waiting for device >
Motorola qboot utility version 3.86
[ 0.000] Opening device: \\.\COM5
[ 0.003] Detecting device
[ 0.007] ...cpu.id = 186 (0xba)
[ 0.008] ...cpu.sn = 1196350551 (0x474edc57)
[ 0.009] Opening singleimage
[ 0.024] Loading package
[ 0.030] Failed identify board. Wrong package?
[ 0.031] ERROR: error loading package
[ 0.032] Check qboot_log.txt for more details
[ 0.032] Total time: 0.033s
FAILED: qb_flash_singleimage()->error loading package
E:\UNBRICK G7 Play\blankflashg7play\blankflash>pause
Press any key to continue . . .
Same results over and over... anymore Ideas? is there a way I can completely reformat the phone completely?
NinjaMonkey1183 said:
E:\UNBRICK G7 Play\blankflashg7play\blankflash>.\qboot.exe blank-flash
< waiting for device >
Motorola qboot utility version 3.86
[ 0.000] Opening device: \\.\COM5
[ 0.003] Detecting device
[ 0.007] ...cpu.id = 186 (0xba)
[ 0.008] ...cpu.sn = 1196350551 (0x474edc57)
[ 0.009] Opening singleimage
[ 0.024] Loading package
[ 0.030] Failed identify board. Wrong package?
[ 0.031] ERROR: error loading package
[ 0.032] Check qboot_log.txt for more details
[ 0.032] Total time: 0.033s
FAILED: qb_flash_singleimage()->error loading package
E:\UNBRICK G7 Play\blankflashg7play\blankflash>pause
Press any key to continue . . .
Same results over and over... anymore Ideas? is there a way I can completely reformat the phone completely?
Click to expand...
Click to collapse
The best thing I can think of is, reinstall Motorola's USB drivers, then try following this post. The blank flash files need to be in the same folder as the qpst binaries.
Esperimenta este amigo??
https://forum.xda-developers.com/attachment.php?attachmentid=4985183&d=1585912069
Solution!!!
I finally managed to get back to fastboot...
I believe I used the .rar blankflash above (spanish post)
I had no luck with linux nor windows, what I finally did that worked:
---Extract that .rar, "BlackFlash-MotoG7Power"... to the Desktop (Windows 10)
------ That's right. G7 Power. Yet - I'm giving instructions for the g7 PLAY. Infuriating.
---Open command prompt as administrator
---CD to the Desktop
---Run blank-flash.bat
This worked the first time I tried it. I literally was at something like 60 hours of effort towards unbricking my xt1952-4, and this is what worked. I'm relieved, very relieved, but I'm so fed up with everything that didn't work/not knowing WHY it didn't work... Eh, I guess I ought to just take the win...
New rescue tool from Motorola (LMSA) fixes hard bricks
Google search LMSA download and get the new rescue tool from Moto..it wrjs great. I used it to save my G7 play
devine3035 said:
Google search LMSA download and get the new rescue tool from Moto..it wrjs great. I used it to save my G7 play
Click to expand...
Click to collapse
This is now called rescue and smart assistant but you have to be on stock software or it wont work
krbzzr said:
Solution!!!
I finally managed to get back to fastboot...
I believe I used the .rar blankflash above (spanish post)
I had no luck with linux nor windows, what I finally did that worked:
---Extract that .rar, "BlackFlash-MotoG7Power"... to the Desktop (Windows 10)
------ That's right. G7 Power. Yet - I'm giving instructions for the g7 PLAY. Infuriating.
---Open command prompt as administrator
---CD to the Desktop
---Run blank-flash.bat
This worked the first time I tried it. I literally was at something like 60 hours of effort towards unbricking my xt1952-4, and this is what worked. I'm relieved, very relieved, but I'm so fed up with everything that didn't work/not knowing WHY it didn't work... Eh, I guess I ought to just take the win...
Click to expand...
Click to collapse
Holy crap!!!! Your post just saved my new G7! Yes that's right. It's a G7 and I used that blankflash from the spanish post which is for the G7 Power. And why did I try that? Because your G7 Play and my G7 both showed a CPU id of 186 in blankflash mode. So it was like ... what else do I have to lose at that point?
And like with your device, it worked on mine the first time I tried it!
NinjaMonkey1183 said:
E:\UNBRICK G7 Play\blankflashg7play\blankflash>.\qboot.exe blank-flash
< waiting for device >
Motorola qboot utility version 3.86
[ 0.000] Opening device: \\.\COM5
[ 0.003] Detecting device
[ 0.007] ...cpu.id = 186 (0xba)
[ 0.008] ...cpu.sn = 1196350551 (0x474edc57)
[ 0.009] Opening singleimage
[ 0.024] Loading package
[ 0.030] Failed identify board. Wrong package?
[ 0.031] ERROR: error loading package
[ 0.032] Check qboot_log.txt for more details
[ 0.032] Total time: 0.033s
FAILED: qb_flash_singleimage()->error loading package
E:\UNBRICK G7 Play\blankflashg7play\blankflash>pause
Press any key to continue . . .
Same results over and over... anymore Ideas? is there a way I can completely reformat the phone completely?
Click to expand...
Click to collapse
Hi!
Can anybody help me to un-brick my rather new Moto G7 power (XT1955-4)?
I tried to install a LineageOS 17.1 custom ROM, but to say the truth I did not really understand what I was doing. I managed to unlock the phone and to install TWRP. Then I tried to get LOS on the phone by running "adb sideload lineage-17.1-xxxx.zip"; this ended with an error message I forget to save (something about cache not found, I think). Best of all, I tried to reboot from TWRP then, and whooops: the phone was hard bricked (no reaction at all to any of the buttons, nothing on the screen).
Since I still can see the phone in EDL mode, I tried to blankflash it as described in various places in this forum. I used the following files
blankflash_ocean_PDOS29.114-134-2.zip
blankflash_sdm632_PDOS29.114-134-9.zip
BlankFlash-MotoG7power-OCEAN-SDM632-PPOS29.114-134-10.rar
but I always end up with the same error message (and yes, I have tried it 1000 times pressing all possible combinations of buttons):
**** Log buffer [000001] 2020-06-15_15:56:17 ****
[ 0.000] Opening device: /dev/ttyUSB0
[ 0.000] Detecting device
[ 0.003] ...cpu.id = 186 (0xba)
[ 0.003] ...cpu.sn = 905333054 (0x35f6493e)
[ 0.003] Opening singleimage
[ 0.061] Loading package
[ 0.063] ...filename = singleimage.pkg.xml
[ 0.064] Loading programmer
[ 0.066] ...filename = programmer.mbn
[ 0.066] Sending programmer
[ 0.343] Handling things over to programmer
[ 0.343] Identifying CPU version
[ 0.346] Waiting for firehose to get ready
[ 3.350] ...MSM8953 1.0
[ 3.350] Determining target secure state
[ 3.352] ...secure = yes
[ 3.375] Configuring device...
[ 4.687] ERROR: do_package()->do_recipe()->do_configure()->bad response
[ 4.687] Check qboot_log.txt for more details
[ 4.687] Total time: 4.687s
[ 4.687]
[ 4.687] qboot version 3.40
[ 4.687]
[ 4.687] DEVICE {
[ 4.687] name = "/dev/ttyUSB0",
[ 4.687] flags = "0x140",
[ 4.687] addr = "0x96FEC958",
[ 4.687] serial_nix.device_pathname = "/sys/bus/usb/devices/1-1.2/1-1.2:1.0/ttyUSB0",
[ 4.687] sahara.current_mode = "0",
[ 4.687] api.buffer = "0x7F5E6787A010",
[ 4.687] cpu.serial = "905333054",
[ 4.687] cpu.id = "186",
[ 4.687] cpu.sv_sbl = "0",
[ 4.687] cpu.name = "MSM8953",
[ 4.687] storage.type = "eMMC",
[ 4.687] sahara.programmer = "programmer.mbn",
[ 4.687] module.firehose = "0x1D23250",
[ 4.687] api.firehose = "0x1D2F010",
[ 4.687] cpu.ver = "256",
[ 4.687] cpu.vername = "1.0",
So: Is there anything I can do? I really would hate it to throw away this nice phone!
Many thanks for your help!!!
P.S.: I am sorry if my description of what I did is not very accurate, but I am really a newbie in this business
Did you have the latest security update ? Did u flash the the ab partition zip before flashing the rom
roadkill42 said:
Did you have the latest security update ? Did u flash the the ab partition zip before flashing the rom
Click to expand...
Click to collapse
About the update: I am not sure, but I do not think so - I started with my hard bricking activities as soon as I got the phone
And no, I did not flash the ab partition zip before flashing the rom - this was not mentioned in the tutorial I followed.
shaka12 said:
About the update: I am not sure, but I do not think so - I started with my hard bricking activities as soon as I got the phone
And no, I did not flash the ab partition zip before flashing the rom - this was not mentioned in the tutorial I followed.
Click to expand...
Click to collapse
Yep it is go to tellagran group g7 power discussion group. Everything u need is there
Hi folks! I'm also stuck with a hard bricked Moto G7Power (ocean), same variant as the author.
To tell things in order, I started 6 months ago with my Ocean, which I unlocked and put on Lineage17.1 with MicroG back then. I updated it till the latest 17.1 (I was scared of switching to 18.1 because of the partition changes).
This morning my phone just went into a bootloop (boot animation endless, sometimes going to the PIN screen, then restarting right away).
My phone was still detected normally in adb and fastboot.
I did the following:
1. full backup on SD card via TWRP & copy internal storage to my PC
2. Copied latest Lineage lineage-18.1-20210621-microG-ocean.zip to SD card and tried to flash from TWRP (after system/data/cache wipe) --> failed (ERROR 1: xlDownloadOperationExecutionError)
3. Tried to flash it with a TWRP I booted via fastboot (this is how I had installed Lineage17.1 successfully in first place several months ago) --> same error
4. Tried to sideload it --> hang (damn sideload is not very reliable). This is obviously where things started to really go wrong. As nothing moved anymore, I pulled the cable while the phone was stuck at the first line of flashing (still at 0 percent)
5. I then flashed the latest TWRP version twrp-3.5.2_10-0-ocean
6. Tried to flash stock ROM XT1955-4_OCEAN_RETEU_9.0_PPOS29.114-134-13_cid50 with these instructions (fastboot way) https://forum.xda-developers.com/t/guide-flashing-motorola-firmware.4042039/ --> failed (invalid partition system). From now on I realized I had no more partitions and the bootloader changed to a nearly blank one with changed serial number
7. I followed the advice from the index in order to blank flash with blankflash_from_PDOS29.114-134-2 --> always got the same error (multiple "waiting for firehose", then "Error do package>do recipe...) I did multiple tries with different USB slots, different cable pulls, Power button hold lengths,.... I also tried to blankflash without the SD card (one user reported that helped) --> nothing
I have checked the drivers are correctly installed (Qualcomm 9008 shows up as COM4 when I put the phone in EDL via fastboot oem blankflash ). I also tried LMSA (which didn't recognize the device).
As I don't have a phone for now, I obviously have no more access to the telegram group.
How can I get a blankflash to work in order to recover partitions? If I manage to do that, I feel confident about flashing stock firmware and then Lineage again...
@sd_shadow any ideas?
Here is my current fastboot getvar all:
Code:
C:\adb\Minimal ADB and Fastboot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: MBM-2.1-ocean_retail-0ff20295b20-200403
(bootloader) product: ocean
(bootloader) board: ocean
(bootloader) secure: yes
(bootloader) hwrev: PVT1
(bootloader) radio: 2
(bootloader) storage-type: emmc
(bootloader) emmc: 64GB MICRON S0J9N8 RV=08 PV=10 FV=0000000000000004
(bootloader) ram: 4GB MICRON LP3 DIE=8Gb M5=FF M6=01 M7=00 M8=5F
(bootloader) cpu: SDM632
(bootloader) serialno: 14b6c5f9
(bootloader) cid: 0xDEAD
(bootloader) channelid: 0x00
(bootloader) uid: 0000000000000000000000000000
(bootloader) securestate: oem_locked
(bootloader) iswarrantyvoid: n/a
(bootloader) max-download-size: 536870912
(bootloader) reason: Volume down key pressed
(bootloader) imei:
(bootloader) meid:
(bootloader) date:
(bootloader) sku:
(bootloader) carrier_sku:
(bootloader) battid:
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time:
(bootloader) ro.build.fingerprint:
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full:
(bootloader) ro.build.version.qcom:
(bootloader) version-baseband:
(bootloader) kernel.version:
(bootloader) sbl1.git: sbl1.git
(bootloader) rpm.git: rpm.git
(bootloader) tz.git: tz.git
(bootloader) devcfg.git: devcfg.git
(bootloader) keymaster.git: keymaster.git
(bootloader) cmnlib.git: cmnlib.git
(bootloader) cmnlib64.git: cmnlib64.git
(bootloader) prov.git: prov.git
(bootloader) aboot.git: MBM-2.1-ocean_retail-0ff20295b20-200403
(bootloader) frp-state: no protection (err)
(bootloader) ro.carrier:
(bootloader) current-slot:
(bootloader) running-boot-lun: must + g->mlen
(bootloader) running-slot:
(bootloader) slot-suffixes: _a
(bootloader) slot-count: 1
(bootloader) slot-successful:_a: INVALID
(bootloader) slot-successful:_b: INVALID
(bootloader) slot-bootable:_a: INVALID
(bootloader) slot-bootable:_b: INVALID
(bootloader) slot-retry-count:_a: unknown
(bootloader) slot-retry-count:_b: unknown
all: listed above
finished. total time: 0.260s
hereunder the log from the blankflash tries (example):
Code:
[ -0.000] Opening device: \\.\COM14
[ -0.000] Detecting device
[ 0.010] ...cpu.id = 186 (0xba)
[ 0.010] ...cpu.sn = 1169894566 (0x45bb2ca6)
[ 0.010] Opening singleimage
[ 0.010] Loading package
[ 0.010] ...filename = singleimage.pkg.xml
[ 0.020] Loading programmer
[ 0.020] ...filename = programmer.mbn
[ 0.020] Sending programmer
[ 0.320] Handling things over to programmer
[ 0.320] Identifying CPU version
[ 0.330] Waiting for firehose to get ready
[ 30.873] ReadFile() failed, GetLastError()=0
[ 30.893] ReadFile() failed, GetLastError()=0
[ 62.336] Waiting for firehose to get ready
[122.573] ...MSM8953 unknown
[122.573] Determining target secure state
[122.573] Waiting for firehose to get ready
[182.829] ...secure = no
[182.869] Initializing storage
[182.879] Waiting for firehose to get ready
[243.105] Configuring device...
[243.105] Waiting for firehose to get ready
[303.351] Waiting for firehose to get ready
[363.597] Waiting for firehose to get ready
[423.843] Waiting for firehose to get ready
[484.066] Initializing storage
[484.076] Waiting for firehose to get ready
[544.312] Configuring device...
[544.312] Waiting for firehose to get ready
[604.549] Waiting for firehose to get ready
[664.775] Waiting for firehose to get ready
[725.019] Waiting for firehose to get ready
[785.255] Waiting for firehose to get ready
[845.481] Configuring device...
[845.481] Waiting for firehose to get ready
[905.717] Waiting for firehose to get ready
[966.083] Waiting for firehose to get ready
[1026.310] Waiting for firehose to get ready
[1086.748] ERROR: do_package()->do_recipe()->do_configure()->buffer_read()->device_read()->IO error
[1086.748] Check qboot_log.txt for more details
[1086.748] Total time: 1086.748s
[1086.748] There were some hiccups in backup and restore.
[1086.758] Please save the following files and see a Bootloader member.
[1086.758] 1) ./qboot_log.txt
[1086.758] 2) ./backup_0x45BB2CA6_2021-06-30_014542.img
[1086.758]
[1086.768]
[1086.768] qboot version 3.40
[1086.768]
[1086.768] DEVICE {
[1086.768] name = "\\.\COM14",
[1086.768] flags = "0x64",
[1086.768] addr = "0x28FE6C",
[1086.768] sahara.current_mode = "0",
[1086.768] api.buffer = "0x630020",
[1086.768] cpu.serial = "1169894566",
[1086.768] cpu.id = "186",
[1086.768] cpu.sv_sbl = "0",
[1086.768] cpu.name = "MSM8953",
[1086.768] storage.type = "eMMC",
[1086.768] sahara.programmer = "programmer.mbn",
[1086.768] module.firehose = "0x481580",
[1086.768] cpu.ver = "0",
[1086.768] cpu.vername = "unknown",
[1086.768] api.bnr = "0x48D860",
[1086.768] }
[1086.768]
[1086.768]
[1086.768] Backup & Restore {
[1086.768] num_entries = 27,
[1086.768] restoring = "false",
[1086.768] restore_error = "not started",
[1086.768] entries[00] = { skipped = 0, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="cid"},
[1086.768] entries[01] = { skipped = 0, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="frp"},
[1086.768] entries[02] = { skipped = 0, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="hw"},
[1086.768] entries[03] = { skipped = 0, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="misc"},
[1086.768] entries[04] = { skipped = 0, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="persist"},
[1086.768] entries[05] = { skipped = 0, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="persist2"},
[1086.768] entries[06] = { skipped = 0, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="utags"},
[1086.768] entries[07] = { skipped = 0, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="devinfo"},
[1086.768] entries[08] = { skipped = 0, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="sp"},
[1086.768] entries[09] = { skipped = 1, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="aboot_a"},
[1086.768] entries[10] = { skipped = 1, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="cmnlib_a"},
[1086.768] entries[11] = { skipped = 1, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="cmnlib64_a"},
[1086.768] entries[12] = { skipped = 1, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="devcfg_a"},
[1086.768] entries[13] = { skipped = 1, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="keymaster_a"},
[1086.768] entries[14] = { skipped = 1, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="tz_a"},
[1086.768] entries[15] = { skipped = 1, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="rpm_a"},
[1086.768] entries[16] = { skipped = 1, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="prov_a"},
[1086.768] entries[17] = { skipped = 1, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="sbl1_a"},
[1086.768] entries[18] = { skipped = 1, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="aboot_b"},
[1086.768] entries[19] = { skipped = 1, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="cmnlib_b"},
[1086.768] entries[20] = { skipped = 1, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="cmnlib64_b"},
[1086.768] entries[21] = { skipped = 1, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="devcfg_b"},
[1086.768] entries[22] = { skipped = 1, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="keymaster_b"},
[1086.768] entries[23] = { skipped = 1, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="tz_b"},
[1086.768] entries[24] = { skipped = 1, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="rpm_b"},
[1086.768] entries[25] = { skipped = 1, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="prov_b"},
[1086.768] entries[26] = { skipped = 1, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="sbl1_b"},
[1086.768] simg = {
[1086.768] filename = "backup_0x45BB2CA6_2021-06-30_014542.img",
[1086.768] entries[00] = { size = 405264, name = "programmer.mbn" },
[1086.768] }
[1086.768] }
WildZammi said:
Hi folks! I'm also stuck with a hard bricked Moto G7Power (ocean), same variant as the author.
To tell things in order, I started 6 months ago with my Ocean, which I unlocked and put on Lineage17.1 with MicroG back then. I updated it till the latest 17.1 (I was scared of switching to 18.1 because of the partition changes).
This morning my phone just went into a bootloop (boot animation endless, sometimes going to the PIN screen, then restarting right away).
My phone was still detected normally in adb and fastboot.
I did the following:
1. full backup on SD card via TWRP & copy internal storage to my PC
2. Copied latest Lineage lineage-18.1-20210621-microG-ocean.zip to SD card and tried to flash from TWRP (after system/data/cache wipe) --> failed (ERROR 1: xlDownloadOperationExecutionError)
3. Tried to flash it with a TWRP I booted via fastboot (this is how I had installed Lineage17.1 successfully in first place several months ago) --> same error
4. Tried to sideload it --> hang (damn sideload is not very reliable). This is obviously where things started to really go wrong. As nothing moved anymore, I pulled the cable while the phone was stuck at the first line of flashing (still at 0 percent)
5. I then flashed the latest TWRP version twrp-3.5.2_10-0-ocean
6. Tried to flash stock ROM XT1955-4_OCEAN_RETEU_9.0_PPOS29.114-134-13_cid50 with these instructions (fastboot way) https://forum.xda-developers.com/t/guide-flashing-motorola-firmware.4042039/ --> failed (invalid partition system). From now on I realized I had no more partitions and the bootloader changed to a nearly blank one with changed serial number
7. I followed the advice from the index in order to blank flash with blankflash_from_PDOS29.114-134-2 --> always got the same error (multiple "waiting for firehose", then "Error do package>do recipe...) I did multiple tries with different USB slots, different cable pulls, Power button hold lengths,.... I also tried to blankflash without the SD card (one user reported that helped) --> nothing
I have checked the drivers are correctly installed (Qualcomm 9008 shows up as COM4 when I put the phone in EDL via fastboot oem blankflash ). I also tried LMSA (which didn't recognize the device).
As I don't have a phone for now, I obviously have no more access to the telegram group.
How can I get a blankflash to work in order to recover partitions? If I manage to do that, I feel confident about flashing stock firmware and then Lineage again...
@sd_shadow any ideas?
Here is my current fastboot getvar all:
Code:
C:\adb\Minimal ADB and Fastboot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: MBM-2.1-ocean_retail-0ff20295b20-200403
(bootloader) product: ocean
(bootloader) board: ocean
(bootloader) secure: yes
(bootloader) hwrev: PVT1
(bootloader) radio: 2
(bootloader) storage-type: emmc
(bootloader) emmc: 64GB MICRON S0J9N8 RV=08 PV=10 FV=0000000000000004
(bootloader) ram: 4GB MICRON LP3 DIE=8Gb M5=FF M6=01 M7=00 M8=5F
(bootloader) cpu: SDM632
(bootloader) serialno: 14b6c5f9
(bootloader) cid: 0xDEAD
(bootloader) channelid: 0x00
(bootloader) uid: 0000000000000000000000000000
(bootloader) securestate: oem_locked
(bootloader) iswarrantyvoid: n/a
(bootloader) max-download-size: 536870912
(bootloader) reason: Volume down key pressed
(bootloader) imei:
(bootloader) meid:
(bootloader) date:
(bootloader) sku:
(bootloader) carrier_sku:
(bootloader) battid:
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time:
(bootloader) ro.build.fingerprint:
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full:
(bootloader) ro.build.version.qcom:
(bootloader) version-baseband:
(bootloader) kernel.version:
(bootloader) sbl1.git: sbl1.git
(bootloader) rpm.git: rpm.git
(bootloader) tz.git: tz.git
(bootloader) devcfg.git: devcfg.git
(bootloader) keymaster.git: keymaster.git
(bootloader) cmnlib.git: cmnlib.git
(bootloader) cmnlib64.git: cmnlib64.git
(bootloader) prov.git: prov.git
(bootloader) aboot.git: MBM-2.1-ocean_retail-0ff20295b20-200403
(bootloader) frp-state: no protection (err)
(bootloader) ro.carrier:
(bootloader) current-slot:
(bootloader) running-boot-lun: must + g->mlen
(bootloader) running-slot:
(bootloader) slot-suffixes: _a
(bootloader) slot-count: 1
(bootloader) slot-successful:_a: INVALID
(bootloader) slot-successful:_b: INVALID
(bootloader) slot-bootable:_a: INVALID
(bootloader) slot-bootable:_b: INVALID
(bootloader) slot-retry-count:_a: unknown
(bootloader) slot-retry-count:_b: unknown
all: listed above
finished. total time: 0.260s
hereunder the log from the blankflash tries (example):
Code:
[ -0.000] Opening device: \\.\COM14
[ -0.000] Detecting device
[ 0.010] ...cpu.id = 186 (0xba)
[ 0.010] ...cpu.sn = 1169894566 (0x45bb2ca6)
[ 0.010] Opening singleimage
[ 0.010] Loading package
[ 0.010] ...filename = singleimage.pkg.xml
[ 0.020] Loading programmer
[ 0.020] ...filename = programmer.mbn
[ 0.020] Sending programmer
[ 0.320] Handling things over to programmer
[ 0.320] Identifying CPU version
[ 0.330] Waiting for firehose to get ready
[ 30.873] ReadFile() failed, GetLastError()=0
[ 30.893] ReadFile() failed, GetLastError()=0
[ 62.336] Waiting for firehose to get ready
[122.573] ...MSM8953 unknown
[122.573] Determining target secure state
[122.573] Waiting for firehose to get ready
[182.829] ...secure = no
[182.869] Initializing storage
[182.879] Waiting for firehose to get ready
[243.105] Configuring device...
[243.105] Waiting for firehose to get ready
[303.351] Waiting for firehose to get ready
[363.597] Waiting for firehose to get ready
[423.843] Waiting for firehose to get ready
[484.066] Initializing storage
[484.076] Waiting for firehose to get ready
[544.312] Configuring device...
[544.312] Waiting for firehose to get ready
[604.549] Waiting for firehose to get ready
[664.775] Waiting for firehose to get ready
[725.019] Waiting for firehose to get ready
[785.255] Waiting for firehose to get ready
[845.481] Configuring device...
[845.481] Waiting for firehose to get ready
[905.717] Waiting for firehose to get ready
[966.083] Waiting for firehose to get ready
[1026.310] Waiting for firehose to get ready
[1086.748] ERROR: do_package()->do_recipe()->do_configure()->buffer_read()->device_read()->IO error
[1086.748] Check qboot_log.txt for more details
[1086.748] Total time: 1086.748s
[1086.748] There were some hiccups in backup and restore.
[1086.758] Please save the following files and see a Bootloader member.
[1086.758] 1) ./qboot_log.txt
[1086.758] 2) ./backup_0x45BB2CA6_2021-06-30_014542.img
[1086.758]
[1086.768]
[1086.768] qboot version 3.40
[1086.768]
[1086.768] DEVICE {
[1086.768] name = "\\.\COM14",
[1086.768] flags = "0x64",
[1086.768] addr = "0x28FE6C",
[1086.768] sahara.current_mode = "0",
[1086.768] api.buffer = "0x630020",
[1086.768] cpu.serial = "1169894566",
[1086.768] cpu.id = "186",
[1086.768] cpu.sv_sbl = "0",
[1086.768] cpu.name = "MSM8953",
[1086.768] storage.type = "eMMC",
[1086.768] sahara.programmer = "programmer.mbn",
[1086.768] module.firehose = "0x481580",
[1086.768] cpu.ver = "0",
[1086.768] cpu.vername = "unknown",
[1086.768] api.bnr = "0x48D860",
[1086.768] }
[1086.768]
[1086.768]
[1086.768] Backup & Restore {
[1086.768] num_entries = 27,
[1086.768] restoring = "false",
[1086.768] restore_error = "not started",
[1086.768] entries[00] = { skipped = 0, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="cid"},
[1086.768] entries[01] = { skipped = 0, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="frp"},
[1086.768] entries[02] = { skipped = 0, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="hw"},
[1086.768] entries[03] = { skipped = 0, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="misc"},
[1086.768] entries[04] = { skipped = 0, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="persist"},
[1086.768] entries[05] = { skipped = 0, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="persist2"},
[1086.768] entries[06] = { skipped = 0, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="utags"},
[1086.768] entries[07] = { skipped = 0, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="devinfo"},
[1086.768] entries[08] = { skipped = 0, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="sp"},
[1086.768] entries[09] = { skipped = 1, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="aboot_a"},
[1086.768] entries[10] = { skipped = 1, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="cmnlib_a"},
[1086.768] entries[11] = { skipped = 1, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="cmnlib64_a"},
[1086.768] entries[12] = { skipped = 1, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="devcfg_a"},
[1086.768] entries[13] = { skipped = 1, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="keymaster_a"},
[1086.768] entries[14] = { skipped = 1, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="tz_a"},
[1086.768] entries[15] = { skipped = 1, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="rpm_a"},
[1086.768] entries[16] = { skipped = 1, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="prov_a"},
[1086.768] entries[17] = { skipped = 1, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="sbl1_a"},
[1086.768] entries[18] = { skipped = 1, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="aboot_b"},
[1086.768] entries[19] = { skipped = 1, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="cmnlib_b"},
[1086.768] entries[20] = { skipped = 1, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="cmnlib64_b"},
[1086.768] entries[21] = { skipped = 1, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="devcfg_b"},
[1086.768] entries[22] = { skipped = 1, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="keymaster_b"},
[1086.768] entries[23] = { skipped = 1, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="tz_b"},
[1086.768] entries[24] = { skipped = 1, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="rpm_b"},
[1086.768] entries[25] = { skipped = 1, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="prov_b"},
[1086.768] entries[26] = { skipped = 1, backup_tried = 0, backup_failed = 0, restore_tried = 0, restore_failed = 0, name ="sbl1_b"},
[1086.768] simg = {
[1086.768] filename = "backup_0x45BB2CA6_2021-06-30_014542.img",
[1086.768] entries[00] = { size = 405264, name = "programmer.mbn" },
[1086.768] }
[1086.768] }
Click to expand...
Click to collapse
With the dead cid, and invalid a/b slots
Blankflash is the only option that I know of
Look for a newer blankflash.
There is a Window app for Telagram
sd_shadow said:
With the dead cid, and invalid a/b slots
Blankflash is the only option that I know of
Look for a newer blankflash.
There is a Window app for Telagram
Click to expand...
Click to collapse
Thanks a lot! The problem was actually the blankflash I tried (Android 9, while the phone had already been on Android 10).
With the more recent blankflash blankflash_from_QCO30.85-18 I managed to get partitions back and recover a normal bootloader and serial number. Just baseband is still gone...
I have reflashed TWRP 3.5.2 now (so recovery is back) and I'm currently downloading the latest RETEU firmware from lolinet (which I will try to flash via fastboot).
Once that is done, I should be back to stock. Then I can do a full backup, flash copy_ab again and then switch back to Lineage (I'd rather install 18.1 directly) via TWRP, is that right?
So, after flashing TWRP, I flashed the XT1955-4_OCEAN_RETEU_10_QPOS30.52-29-7-6_cid50 stock firmware via Fastboot (bat file mode from Root Junkie's video here https://forum.xda-developers.com/t/guide-flashing-motorola-firmware.4042039/ ).
Nevertheless, I still have no baseband and when I try to boot to system, it still bootloops.
On Slot A, I now have RETEU stock ROM, and on the B slot seems to be the rests of my former Lineage17.1 (in any case the custom boot logo appears during boot loop). So I bootloop on both slots.
The device also bootloops when I try to boot recovery. For getting into recovery I must do
Code:
fastboot boot twrp.img
Normally, stock ROM was supposed to "heal" the bootloop thing, wasn't it?
Can anyone help me out on the next steps?
To put it in a nutshell: after flashing stock ROM, I have these symptoms:
1. baseband: <not found> in fastboot getvar all (but IMEI1 is ok)
2. stuck on bootlogo on slot A system (stock)
3. stuck on bootlogo when booting into recovery on slot A
4. Bootloop on slot B (looks like my prior lineage bootlogo)
5. Booting into TWRP recovery from slot B gets stuck on Teamwin startup screen with version number (only fastbooting the TWRP image va PC works)
EDIT: After reflashing stock ROM once again, things miraculously became better: Now I can boot again to stock on slot A
But: I can't flash any recovery nor even boot one via fastboot (hangs on bootlogo). I have activated USB debugging again on the new stock ROM before trying. Device is found in fastboot mode correctly.
fastboot getvar all shows this in the end:
Code:
(bootloader) frp-state: no protection (0)
(bootloader) ro.carrier: reteu2
(bootloader) current-slot: a
(bootloader) running-boot-lun: 0
(bootloader) running-slot: _a
(bootloader) slot-suffixes: _a,_b
(bootloader) slot-count: 2
(bootloader) slot-successful:_a: Yes
(bootloader) slot-successful:_b: No
(bootloader) slot-bootable:_a: Yes
(bootloader) slot-bootable:_b: Yes
(bootloader) slot-retry-count:_a: 6
(bootloader) slot-retry-count:_b: 0
EDIT2: I still can't flash Lineage, I always get Error 28 (kDownloadOperationExecutionError). Booting TWRP from fastboot works, flashing TWRP from this fastbooted TWRP works, but booting into recovery still doesn't work. Any advice to get me further?