I'm trying to understand how to flash the ATT Firmware on my phone. Its been years since ive done any flashing so please bare with me. I downloaded ODIN 3.12
downloaded firmware from SAMobile
used the AP BL CP HOME CSC
but always fails. on setup connection ... Can someone walk me through the process please. Thanks a bunch
shiftkenny said:
I'm trying to understand how to flash the ATT Firmware on my phone. Its been years since ive done any flashing so please bare with me. I downloaded ODIN 3.12
downloaded firmware from SAMobile
used the AP BL CP HOME CSC
but always fails. on setup connection ... Can someone walk me through the process please. Thanks a bunch
Click to expand...
Click to collapse
check your other post
Related
hello.
usually when I have a few flash the phone I like to leave the factory, which I put the factory oxa with partition marked in 5 files odin with pit, bootloader, code, modem (LJ2) and csc.
I've never had trouble oxa install the factory and I have done more than 20 times since upgrading to M16 (4.3) I have been unable to do the operation because when I have uploaded files to download odin and phone wire as I give to start the SET PARTITION makes an instant and I FAIL throws.
windows thereupon losing throws me Connect message pc / phone.
I've tried with two different pcs and does the same, they know they can be happening? the fault of the new base? I must do to stop factory new phone?
thank you very much
xavivts said:
hello.
usually when I have a few flash the phone I like to leave the factory, which I put the factory oxa with partition marked in 5 files odin with pit, bootloader, code, modem (LJ2) and csc.
I've never had trouble oxa install the factory and I have done more than 20 times since upgrading to M16 (4.3) I have been unable to do the operation because when I have uploaded files to download odin and phone wire as I give to start the SET PARTITION makes an instant and I FAIL throws.
windows thereupon losing throws me Connect message pc / phone.
I've tried with two different pcs and does the same, they know they can be happening? the fault of the new base? I must do to stop factory new phone?
thank you very much
Click to expand...
Click to collapse
Can SWe downgrade from 4.3 to 4.1.2?
lidootn said:
Can SWe downgrade from 4.3 to 4.1.2?
Click to expand...
Click to collapse
with cwm downgrade if you can make a nandroid backup, but I do it with odin to restore the factory.
regards
You can try to download default samsung firmware from sammobile and use Odin to install the firmware. For me it works.
Keanys said:
You can try to download default samsung firmware from sammobile and use Odin to install the firmware. For me it works.
Click to expand...
Click to collapse
Sure, thats better way xavivts.
Keanys said:
You can try to download default samsung firmware from sammobile and use Odin to install the firmware. For me it works.
Click to expand...
Click to collapse
Fataldose said:
Sure, thats better way xavivts.
Click to expand...
Click to collapse
thanks for your replies mates!!
I do not understand what is the difference of the files that I flash with factory oxa the samsung firmware.
I understand that the firmware in samfirmware there is only one file within a zip to put in pda only and oxa factory has 5 it is mentioned in the first post to leave the factory.
or you mean that first flash of a file and then the oxa factory?
thank you very much:laugh:
i"ve been stuck with this problem from a day now not able to downgrade . it gives me an error. and then tells me to connect to kies for recovery . if i try to flsh the 4.3 rom i'm not able to .after a system restart[comp] i'm able to boot 4.3 again can someone help me out :crying:
Vish2030 said:
i"ve been stuck with this problem from a day now not able to downgrade . it gives me an error. and then tells me to connect to kies for recovery . if i try to flsh the 4.3 rom i'm not able to .after a system restart[comp] i'm able to boot 4.3 again can someone help me out :crying:
Click to expand...
Click to collapse
recover through kies...............
happened to me also when i tried downgrading and raised my warranty void to 1
u cant downgrade as of now if u r on mk5
Whenever I was upgrading to a Kitkat custom Rom.
I faced Boot loop issues.
I upgraded my bootloader to DN3 V5 via ODIN but still the same bootloop issue.
I thought of restarting from scratch and while i connected my note2 via odin I used PIT_N7100_16GB_20121102.pit (pit file) and N7100XXDMG1_N7100ODDDMG1_INU_Prerooted in PDA file I am stuck in
"sboot.bin nand write start failed"...
Please help...
In download mode its showing
"Product Name: GT-N7100
"Current Binary: Samsung Official
System Status: Custom
Knox Warranty Void:1
AP SWREV: A2
SW REV. Check Fail. Device:2 Binary:1
Waiting for a wayout to start using my note2
Thanks a ton in advance...
net.susovan said:
....
I thought of restarting from scratch and while i connected my note2 via odin I used PIT_N7100_16GB_20121102.pit (pit file) and N7100XXDMG1_N7100ODDDMG1_INU_Prerooted in PDA file I am stuck in
"sboot.bin nand write start failed"...
Please help...
...
Click to expand...
Click to collapse
What you are trying above MUST fail, cause downgrading is NOT possible.
Flash newest firmware instead, this is a real start from the beginning, afterwards flash a new custom recovery and you will be able to successfully run any custom rom around here.
Thanks Androidwizzard
Androidwizzard said:
What you are trying above MUST fail, cause downgrading is NOT possible.
Flash newest firmware instead, this is a real start from the beginning, afterwards flash a new custom recovery and you will be able to successfully run any custom rom around here.
Click to expand...
Click to collapse
I am dowloading N7100XXUFND3_N7100ODDFND2_INU.zip from SAM mobile.Will flash it with ODIN.Keeping my finger crossed :angel:
Please let me know if NEED to flash the same Pit file as mentioned above?
Sorry for being a lot Noob
net.susovan said:
I am dowloading N7100XXUFND3_N7100ODDFND2_INU.zip from SAM mobile.Will flash it with ODIN.Keeping my finger crossed :angel:
Please let me know if NEED to flash the same Pit file as mentioned above?
Sorry for being a lot Noob
Click to expand...
Click to collapse
You will flash original firmware for your region, so no need for PIT, just flash firmware tab PDA/AP
And it worked like a charm
Bingo.....:good:
Took 2 days to download but I have the stock Odin flash package (BL, AP, CP, CSC, BL) if anyone needs it, also just the stock RC1 as a ROM.
G925TUVS6FRC1_G925TTMB6FRC1
I'll upload it if anyone needs it
Also twrp-3.2.2-0-zeroltetmo.img.tar works and SuperSU-v2.82-201705271822.zip to root it, any questions just ask.
Hello, this update bricked a family member's phone and flashing the tar on AP mode appears successful but the phone is still stuck in download mode (normal boot produces black screen)
Can you upload the BL, AP, CP, CSC, BL files? Thank you!
---------- Post added at 02:29 AM ---------- Previous post was at 02:18 AM ----------
winmouser said:
Hello, this update bricked a family member's phone and flashing the tar on AP mode appears successful but the phone is still stuck in download mode (normal boot produces black screen)
Can you upload the BL, AP, CP, CSC, BL files? Thank you!
Click to expand...
Click to collapse
BTW the phone is the 32gb version, not sure if the CSC file will affect the partition size during reflash.
sirtweak0 said:
Took 2 days to download but I have the stock Odin flash package (BL, AP, CP, CSC, BL) if anyone needs it, also just the stock RC1 as a ROM.
G925TUVS6FRC1_G925TTMB6FRC1
I'll upload it if anyone needs it
Also twrp-3.2.2-0-zeroltetmo.img.tar works and SuperSU-v2.82-201705271822.zip to root it, any questions just ask.
Click to expand...
Click to collapse
yes i have a few questions...I was trying to fix FRP on a family members S6 Edge who had forgotten her login info and followed the wrong video. now i have a soft-bricked "error has occurred...use the emergency recovery function..." screen and I am very comfortable using Odin so I would rather fix the problem this way.
will your files restore my softbrick? i found another post that explains how to deal with the FRP issue, and talked about using a "combination firmware" but I have no idea what that means. i would believe that given all the files you have that a full restore should be possible, so if you think so I would very much appreciate you uploading them.
advTHANKSance!
OK I have officially screwed up...
So it was all going smoothly flashing a tweaked custom rom and twrp successfully and then I decided to back to stock...
I accidentally (ok maybe not so accidentally) flipped the OEM unlock switch and now I am locked out of my phone since I still had the custom binary on the phone.
I tried to flash the latest stock firmware for the s9 BTU found from samfirm but odin seemed to have not liked the firmware or something and it gave me an a red message on the odin mode screen.
When I try to flash everything at once I get "REV Failed Check (Bootloader)"
When I try to flash just AP I get "REV Failed Check (Kernel)"
At the moment when I boot up I get the message telling me to use emergency software recovery but Smart Switch does not seem to recognise the device either in the emergency recovery page however it does try to connect on the home page.
I'm not too sure what to do, any help would be nice?
Thank you
You cannot downgrade the bootloader, check which version your phone has in Download mode (BL: xx) and check which version the firmware you are flashing has G960FXXU1BRF8
*Detection* said:
You cannot downgrade the bootloader, check which version your phone has in Download mode (BL: xx) and check which version the firmware you are flashing has G960FXXU1BRF8
Click to expand...
Click to collapse
OK I think I have found the BL version from the line that says...
"RP SWREV B:2 K:2 S:2"
But what firmware has the BL Version 2? They all seem to have a BL version of 1 from what you've said?
If there are no firmware which match this, what do I do? Is my phone redundant?
Delks123 said:
OK I think I have found the BL version from the line that says...
"RP SWREV B:2 K:2 S:2"
But what firmware has the BL Version 2? They all seem to have a BL version of 1 from what you've said?
If there are no firmware which match this, what do I do? Is my phone redundant?
Click to expand...
Click to collapse
OK
I saw on another thread that was replied to about the Hong Kong version having been already upgraded to BL 2 so I am going to give flashing that a go and I will report back.
Delks123 said:
OK
I saw on another thread that was replied to about the Hong Kong version having been already upgraded to BL 2 so I am going to give flashing that a go and I will report back.
Click to expand...
Click to collapse
Yea you'll either have to do something like that, or wait for your region firmware to have it's BL updated
Tried it out with a BL2 BTU firmware from SamMobile and the flash went smoothly however now I'm stuck in a bootloop when I'm trying to boot up.
I know this could be anything but I can't get any form of logs as the only mode I have is Odin mode available to me...
The way I flashed it was by doing BL first followed by AP, CP then CSC separately with auto reboot and one other one checked that was instructed by SamMobile. I tried to do them together but I keep getting an error of not being able to read a line.
What should my next step be?
What could be the reason for this bootloop as according to Odin the flash went well?
Thanks in advance
Delks123 said:
Tried it out with a BL2 BTU firmware from SamMobile and the flash went smoothly however now I'm stuck in a bootloop when I'm trying to boot up.
I know this could be anything but I can't get any form of logs as the only mode I have is Odin mode available to me...
The way I flashed it was by doing BL first followed by AP, CP then CSC separately with auto reboot and one other one checked that was instructed by SamMobile. I tried to do them together but I keep getting an error of not being able to read a line.
What should my next step be?
What could be the reason for this bootloop as according to Odin the flash went well?
Thanks in advance
Click to expand...
Click to collapse
You might need to check "Repartition" in ODIN only, flash all 4 parts at the same time, use CSC and not HOME_CSC
Make sure you are using ODIN 3.13.1
Oh yea forgot the update...
I got it working, I think I unchecked repartition and auto reboot whilst flashing all of them together to get it working
So yea this is now solved
Hey guys. Got my ATT fold today and would like to flash the 'unlocked' firmware onto it. I've downloaded the newest ODIN file and the U1 file for firmware. I have my phone in download mode and connected to the PC.
I can launch ODIN and load the files but when I attempt to run the program I get a error message...FAIL SHA256 Is Invalid. If I hit start again I get...Complete Write Operation Failed.
Any help? Thanks.
Did u installed drivers ?
Can you link me to the unlocked firmware I want to flash mine also
Would like to see updates on this as well. On the fence of getting the att fold if I can flash u1 firmware
I just flashed mine hou need the patched Odin. Let me know if you need any help
svickory, I tried to download the patched Odin but seems like the download link is dead. Can you send me the patches Odin if have it? Thx
harsaphes said:
Hey guys. Got my ATT fold today and would like to flash the 'unlocked' firmware onto it. I've downloaded the newest ODIN file and the U1 file for firmware. I have my phone in download mode and connected to the PC.
I can launch ODIN and load the files but when I attempt to run the program I get a error message...FAIL SHA256 Is Invalid. If I hit start again I get...Complete Write Operation Failed.
Any help? Thanks.
Click to expand...
Click to collapse
Are you trying to flash "U1"-firmware to an "U"-device?
THAT's the problem: NOT possible!
actually U1 to U is possible using patched Odin. I just did the conversion using an Odin version that I used for a Note 9 that I had. i can't remember where I got it from but here's a thread that has the same version (per the file name) that I used: https://forum.xda-developers.com/android/software/patched-odin-3-13-1-t3762572
Hello,
Where can I download the firmware?
Edut: found it in another section. Thanks anyways.