Related
hi guys im new to the lg g3 (well any lg phone) just a couple of questions
from what ive read there isnt many roms due to the locked bootloader will the bootloader be unlocked in the future?
i have the D855 uk vodafone model is they a working TWRP or CWR for the g3?
ive rooted so does this mean i can at least remove some bloteware?
thanks guys sorry for questions :victory:
from what ive read there isnt many roms due to the locked bootloader will the bootloader be unlocked in the future?
Probably yes, if the @thecubed and others beat the protection (last post - http://forum.xda-developers.com/ver...3-vs98510b-t2890349/post55729952#post55729952)
i have the D855 uk vodafone model is they a working TWRP or CWR for the g3?
There is only Tethered version and I would not recommend to use it. It's for advanced users only and it's not a "real" recovery. More on http://forum.xda-developers.com/lg-g3/general/recovery-twrp-2-7-1-3-t2831668
ive rooted so does this mean i can at least remove some bloteware?
Yes, you can... , or freeze it. If you will the cause softbrick, use LG Flash Tool 2014 and flash in NORMAL mode latest stock ROM you used or use LG PC Suite. After this you need to re-root it. (http://forum.xda-developers.com/lg-g3/general/guide-unroot-ota-using-lg-pc-suite-pc-t2802286)
shaarky said:
from what ive read there isnt many roms due to the locked bootloader will the bootloader be unlocked in the future?
Probably yes, if the @thecubed and others beat the protection (last post - http://forum.xda-developers.com/ver...3-vs98510b-t2890349/post55729952#post55729952)
i have the D855 uk vodafone model is they a working TWRP or CWR for the g3?
There is only Tethered version and I would not recommend to use it. It's for advanced users only and it's not a "real" recovery. More on http://forum.xda-developers.com/lg-g3/general/recovery-twrp-2-7-1-3-t2831668
ive rooted so does this mean i can at least remove some bloteware?
Yes, you can... , or freeze it. If you will the cause softbrick, use LG Flash Tool 2014 and flash in NORMAL mode latest stock ROM you used or use LG PC Suite. After this you need to re-root it. (http://forum.xda-developers.com/lg-g3/general/guide-unroot-ota-using-lg-pc-suite-pc-t2802286)
Click to expand...
Click to collapse
thanks for the replys if the bootloader doesnt get unlocked then thats going to destroy the g3 for development isnt it
is they a way to flash latest stock rom and get off the vodafone branded rom so i at least get all the latest OTAs?
Not sure I understand you question, but if you mean, whether you will be able to update the phone via OTA in the future, it depends.
If not or if it will not work, unroot your phone, install OTA and the re-root and you should be fine.
But still - all of that is already described in dedicated threads, don't be afraid to take a look around. :fingers-crossed:
As for the development - I guess when it will not get unlocked, it will be from my perspective one of the most wasted money on Android phone for many.
http://forum.xda-developers.com/lg-g3/general/petition-possibility-to-unlock-t2832032 --> https://www.change.org/p/lg-electro...opportunity-to-unlock-bootloader-in-lg-phones (actually just ~8500 of us)
shaarky said:
Not sure I understand you question, but if you mean, whether you will be able to update the phone via OTA in the future, it depends.
If not or if it will not work, unroot your phone, install OTA and the re-root and you should be fine.
But still - all of that is already described in dedicated threads, don't be afraid to take a look around. :fingers-crossed:
Click to expand...
Click to collapse
lol sorry what i ment is im on a vodafone branded firmware now and i wanted to flash a unbranded latest uk stock rom so it will be first to get OTA as branded firmwares can be a bit behind is it possible?
thanks again:good:
I don't think so, but someone else should confirm it.
Eg. you can download FW based on IMEI (http://lg-firmware-rom.com/download-firmware.php?f=YOUR_IMEI_HERE), not based on whether it's branded or not.
But still you have option to use the tools like LG Flash Tool 2014 and simply flash latest firmware you want (for your variant)
shaarky said:
I don't think so, but someone else should confirm it.
Eg. you can download FW based on IMEI (http://lg-firmware-rom.com/download-firmware.php?f=YOUR_IMEI_HERE), not based on whether it's branded or not.
But still you have option to use the tools like LG Flash Tool 2014 and simply flash latest firmware you want (for your variant)
Click to expand...
Click to collapse
hi im downloading latest firmware from here http://forum.xda-developers.com/showthread.php?t=2799647
so can i flash this via lg flash tool or is this not a KDZ?
brockyneo said:
hi im downloading latest firmware from here http://forum.xda-developers.com/showthread.php?t=2799647
so can i flash this via lg flash tool or is this not a KDZ?
Click to expand...
Click to collapse
Also have a look in here http://forum.xda-developers.com/showthread.php?t=2791761
I am on three UK but I flashed v10j a long time ago and am happy with it.
Sent from my LG-D855 using Tapatalk
brockyneo said:
hi im downloading latest firmware from here http://forum.xda-developers.com/showthread.php?t=2799647
so can i flash this via lg flash tool or is this not a KDZ?
Click to expand...
Click to collapse
I know its confusing but you can only flash TOT files with that tool - if you get your FW via the imei cause its a KDZ, for KDZ flashing you need to use this tool...
http://forum.xda-developers.com/showthread.php?t=2785089
So I have been trying to install Cyanogenmod 14, but I am kind of new to this, so I will probably seem pretty stupid. I basically tried to install it but forgot to unlock my bootloader. It was messed up, but I got help to install 2.20.40.184, so it works again. Now, however, I still want to install cyanogenmod 14. Partly because I for some reason don't get the OTA updates (I live in Denmark, where the Zenfone 2 isn't sold, so that may be it), so I've been stuck on lollipop since I got the phone. I don't even get a software update section under settings. So after all this, I tried to unlock the bootloader with the official app that you can download from the Asus website, however, when I do that, I get an error message saying "This device model is not supported". So looking for manual ways to root, I only found one that works with marshmallow, and when I download a ROM for marshmallow, I don't get the notification about an available software update. I also cannot enter recovery mode.
Hope this made sense, and that I posted it in the right place. Thank you!
Asus Zenfone 2
ZE551ML
Z00AD
WW_2.20.40.184
Look for raw file .196 LP from RealYoti on here
Flash it in boot loader, with AFTool
You may have a china firmware converted to WW.
Once you flash try unlock ..or update from sd card to M ...Check my signature for flashing in AFT , also clues in downgrade link for how to write M to be recognised after a reboot for updating
If not got Chinese original serial you should be fine
Then when upgraded to M , Modder tool should be ok for unlocking bl in M
Then you can install 14.1
Hi, thank you very much for your reply.
Should I flash the raw file .196 even though I am using .184 right now? And which of the links in your signature is for flashing with AFtool (and where do I get AFTool?)
I have no idea if I have a chinese firmware converted to WW. Sorry, I am new to this xD
Yes, I am planning to use the modder tool once I have managed to update to Marshmallow.
Thank you very much
I have a question that might be simple to answer, but i need confirmation because i don't want to brick my device recklessly.
When i got my Moto Z play, i immediatley unlocked it, flashed TWRP and installed LineageOS. So my device (including bootloader and baseband) are still on the state it arrived i guess. But my OS ist the newest LineageOS (so android 7.1.2).
My Moto Z play is an XT1635-02 32GB (bootloader adds P7 as variant), software channel must be RETEU.
My bootloader is C0.14 (from 2016-07-11)
and my baseband is M8953_10208.08.04-47e (bootloader says M8953_10208.08.04.47R ADDISON_ROW_CUST)
Are there newer versions of baseband (which might more important) and booloader? And can i flash them without problems?
Just flashing the NON-HLOS.bin in fastboot and i'm fine? Can i also use the 7.0-modem from RETAIL?
Sorry, these questions might be dumb and too careful for old users, but i'm only used to nexus devices and i am scared of bricking my Z play! Nexus factory images always had baseband and bootloader version written in the filename so it was easy to find out if you need to update. In addition there was just one "software channel" which made it hard to brick a device or flash something wrong.
McFlypants said:
I have a question that might be simple to answer, but i need confirmation because i don't want to brick my device recklessly.
When i got my Moto Z play, i immediatley unlocked it, flashed TWRP and installed LineageOS. So my device (including bootloader and baseband) are still on the state it arrived i guess. But my OS ist the newest LineageOS (so android 7.1.2).
My Moto Z play is an XT1635-02 32GB (bootloader adds P7 as variant), software channel must be RETEU.
My bootloader is C0.14 (from 2016-07-11)
and my baseband is M8953_10208.08.04-47e (bootloader says M8953_10208.08.04.47R ADDISON_ROW_CUST)
Are there newer versions of baseband (which might more important) and booloader? And can i flash them without problems?
Just flashing the NON-HLOS.bin in fastboot and i'm fine? Can i also use the 7.0-modem from RETAIL?
Sorry, these questions might be dumb and too careful for old users, but i'm only used to nexus devices and i am scared of bricking my Z play! Nexus factory images always had baseband and bootloader version written in the filename so it was easy to find out if you need to update. In addition there was just one "software channel" which made it hard to brick a device or flash something wrong.
Click to expand...
Click to collapse
I'm running the original bootloader and baseband from 6.0.1 without any issue, so I would suggest leaving it.
I don't want to get on the wrong side of you but that wasn't my question.
I wanted to know this because i'm not sure if i get the most out of my phone with an older baseband. I can't use VoLTE for example which possibly is activated with a newer baseband. Or it might improve the signal.
McFlypants said:
I don't want to get on the wrong side of you but that wasn't my question.
I wanted to know this because i'm not sure if i get the most out of my phone with an older baseband. I can't use VoLTE for example which possibly is activated with a newer baseband. Or it might improve the signal.
Click to expand...
Click to collapse
Well I'll suggest you only flash the baseband that comes with your specific firmware, if you flash the baseband from another firmware package you will end up without a IMEI and you'll have a expensive brick, which you will send to me so I can use the screen to get my mzp working again. That will be payment for warning you
Good one, flashallthetime
Back in, uh, I think Atrix time or even HTC Desire it was normal to flash/change radio baseband. It supposed to improve radio, prolong battery life... In reality, most of the time didn't do anything, sometimes broke something...
So in theory, you can do that. Should be fine but I wouldn't recommend.
If you have to, to get VoLTE, I would make a backup of the current rom, follow guide to flash back to stock and then restore backup. But be extremely careful, so many users over here bricked their devices. As far as I can see, downgrading and the accepting OTA.
Sent from my LG-V940n using Tapatalk
flashallthetime said:
Well I'll suggest you only flash the baseband that comes with your specific firmware, if you flash the baseband from another firmware package you will end up without a IMEI and you'll have a expensive brick, which you will send to me so I can use the screen to get my mzp working again. That will be payment for warning you
Click to expand...
Click to collapse
Good idea, please return it to me afterwards if it's working! :good:
Hello, today i recived an LG G7, but it has firmware brand (TIM)
I was wondering if I changed the firmware with another one, would I get the automatic updates via ota?
Thanks
I bought a TIM branded device, flashed stock 10k OPEN kdz and I don't think the OTA is working
i have the same issue, someone can help?
frenkio said:
Hello, today i recived an LG G7, but it has firmware brand (TIM)
I was wondering if I changed the firmware with another one, would I get the automatic updates via ota?
Thanks
Click to expand...
Click to collapse
I also had tim and when I switched to no brand I stopped receiving ota and also lg bridge no longer updates my phone. I now use LGUP every time there is an update and do a manual upgrade. The lg bridge update log says the phone fails an imei test so I believe there's no other way to update for me and probably for you too.
Sneppahtihs said:
I bought a TIM branded device, flashed stock 10k OPEN kdz and I don't think the OTA is working
Click to expand...
Click to collapse
I bought G7 TIM branded and I flashed EU open kdz. Even though I dont see any branded apps or stuff, in software info I still see 10q-222-01. Do u know how to make it EU Open?
torrat95 said:
I bought G7 TIM branded and I flashed EU open kdz. Even though I dont see any branded apps or stuff, in software info I still see 10q-222-01. Do u know how to make it EU Open?
Click to expand...
Click to collapse
That's the same thing mine is showing, isn't 10q open?
Sneppahtihs said:
That's the same thing mine is showing, isn't 10q open?
Click to expand...
Click to collapse
If it was pure open stock, it shouldn't show that "222-01" thing in software info. It should be "EUR-XX". And I can't make it that way. I'm wondering if anybody achieved it.
Same issue..received a Tim branded G7 so installed GBR open firmware from LG fan now all good no branding just no OTA UPDATES..Anyone know of a fix for this save flashing every new update.?
Any help/information much appreciated....
I’m going to try and flash the Italy open rom if there is one...see if that makes any difference..
What is the Italy code? Is it ITC?
So i flashed a few open firmwares..ITC and GBR open latest ones and earleir releases and none would OTA update only flashing back to origanal TIM firmware did it update OTA.
So its put up with branding etc and get all ota updates or flash a EU open firmware and keep doing this with every update.
frenkio said:
Hello, today i recived an LG G7, but it has firmware brand (TIM)
I was wondering if I changed the firmware with another one, would I get the automatic updates via ota?
Thanks
Click to expand...
Click to collapse
No, only with hands through lgup
So is there any way for users to istall an open F.W so you don’t have network branding or bloatware
And still receive the OTA updates?and security patches
I know it don’t really make a massive difference but the branding and boot screen really winds me up for some reason..
I could send device back as I purchased in the uk thinking it would be a uk phone but it’s Italian..still says LG-G710EM so I guess it’s the Euro variant..
guys, for LMG710EM which firmware should i flash to remove brand?
thanks in advance
opetany said:
guys, for LMG710EM which firmware should i flash to remove brand?
thanks in advance
Click to expand...
Click to collapse
Any that’s an open for your regional area...
Be aware if you do this you will no longer receive OTA updates.
I'm asking because i'm fresh in this topic (and generally in android) and i prefer to ask before i do something wrong.
Yes, i know that i will no longer receive OTA updates what is quite logic, but manual update via LGup isn't a big problem for me. Just less convenience.
So, for Poland, firmware G710EM10q_00_OPEN_EU_OP_1219.kdz should be okay, yes? and one more question, the process of updating via LGup looks like normal firmware updating (keeping the configuration and data) or like clean firmware flashing?
opetany said:
I'm asking because i'm fresh in this topic (and generally in android) and i prefer to ask before i do something wrong.
Yes, i know that i will no longer receive OTA updates what is quite logic, but manual update via LGup isn't a big problem for me. Just less convenience.
So, for Poland, firmware G710EM10q_00_OPEN_EU_OP_1219.kdz should be okay, yes? and one more question, the process of updating via LGup looks like normal firmware updating (keeping the configuration and data) or like clean firmware flashing?
Click to expand...
Click to collapse
Yes that’s an okay firmware for Poland and yes LGUP wipes and gives clean install each time I’ve used it..there maybe a way to upgrade once you have initial new firmware as you don’t want issues so clean install is best to start then investigate upgrade for next time.
When should 9.0 roll out? the G8 already released with it...
mikelt89 said:
When should 9.0 roll out? the G8 already released with it...
Click to expand...
Click to collapse
Christmas maybe.?
sas007 said:
Yes that’s an okay firmware for Poland and yes LGUP wipes and gives clean install each time I’ve used it..there maybe a way to upgrade once you have initial new firmware as you don’t want issues so clean install is best to start then investigate upgrade for next time.
Click to expand...
Click to collapse
Everything went well, thanks for your help!
Can I flash this variant (SM-G990U) over to the ATT, or even a stock unlocked firmware?
The goals are to enable WiFi calling, and remove the metro splash screen.
I cannot root the device as my work requires official firmware.
I am open to suggestions on what is best. I have not tinkered with flashing in quite some time.
U could try to root phone and use safynet fix if your apps requie official firmware non root. if you have (when i check model) standard S21FE phone with branding from ATT (?) you could flash stock rom with odin. I don't know where u from but you could flash your stock firmware for example for spain distribution.
I was able to flash the phone with stock firmware, changed csc to ATT and all works well now. This place has gone downhill. I remember when almost immediate replies to help. Now, not so much. Thanks for trying.