Related
Okay, I'm aware that we're able to flash GT-N7105, AT&T, T-Mobile, and other GSM ROMs on our phones, but would it be possible to flash a completely stock one (from one of the variants) via ODIN, flash the proper CSC and modem and the device status not be "modified"? Also, if so, would it be possible to receive OTA updates, then (because I assume it'd be necessary), reflash CSC/modem as updates roll out?
Or should I just shut up and try to get an authentic GT-N7105? -____- I just want one that doesn't have bloatware, a SIM lock, and can be updated as often as they're rolled out. I was playing around with the aforementioned idea on my backup T889, but I don't know enough to come to a conclusion. I'm running a GT ROM, flashed the recovery back to stock, and unrooted, but it still says modified, so....
Anyone?
Hello,
I just bought my first Galaxy device (had a CDMA LG for a while, and I have a Nexus Tablet), and I am looking at how to get this new phone set up right. I bought my i747 retail, so I was unable to unlock it. However, now I'm struggling with finding the right method for upgrading, rooting, etc. I know nothing about knox or any of these Samsung intricacies. Could someone please give me a little guidance on how to go about getting to the OS and status that I'm looking for? This is what I've done so far:
Came unrooted with 4.1.2 stock rom
Unlocked using legit unlock code
Tried OTA updates, but none were available (must be because of unlock)
Rooted w/ ODIN using 4.1.1 file based of MrRobinson method. (http://forum.xda-developers.com/showthread.php?t=1739426)
Now I keep getting popups like process. ... .acore,media, etc. stopped.
I'm looking to ideally get a custom recovery (either CWM or TWRP, whichever is better) and either kitkat Touchwiz or possibly kitkat nexus stock (I read somewhere that it was possible). Also, i just bought it, and have the code still, so I don't mind deleting everything if needed. Regardless, I'd like the ability to get it back to pure stock with no flash counter (I have a manufacturer's warranty I want to use if need be).
Could someone please just give me a little guidance? I'm pretty capable with rooting, etc., so you'd only need to lead me to other threads, etc. that will take me where I want to go. Thank you very much.
Before flashing or doing anything else, confirm the bootloader on your phone. Download and install the Samsung Phone Info app from the playstore and post your bootloader.
audit13 said:
Before flashing or doing anything else, confirm the bootloader on your phone. Download and install the Samsung Phone Info app from the playstore and post your bootloader.
Click to expand...
Click to collapse
Well, the bad news is I already flashed using MrRobinson's instructions, and now my phone is barely workable, as things like process.android.media and Touchwiz keep crashing. I was able to install the info app though, and my bootloader is listed as I747UCDLK3. Thanks again though, and let me know what else you need from me.
I recommend starting over by flashing the stock AT&T 4.1.1 firmware from sammobile. Once flashed, boot the phone and make sure your phone is sim unlocked. If it isn't sim unlocked, unlock it using the free method or your unlock code.
http://www.sammobile.com/firmwares/database/SGH-I747/
After sim unlocking, run OTA updates until you have the latest stock AT&T ROM on your phone. Upgrading the phone's bootloader and modem is the easiest way to do it for someone that is new to the phone and custom ROMs.
audit13 said:
I recommend starting over by flashing the stock AT&T 4.1.1 firmware from sammobile. Once flashed, boot the phone and make sure your phone is sim unlocked. If it isn't sim unlocked, unlock it using the free method or your unlock code.
http://www.sammobile.com/firmwares/database/SGH-I747/
After sim unlocking, run OTA updates until you have the latest stock AT&T ROM on your phone. Upgrading the phone's bootloader and modem is the easiest way to do it for someone that is new to the phone and custom ROMs.
Click to expand...
Click to collapse
Thank you, but wouldn't OTA updates install Knox, which would basically void my warranty if I tried to flash anything after that? And, I've checked for OTA updates twice, once on 4.1.2 and on 4.1.1, and both times it said my software was up to date.
I spoke with StoneyJSG about my situation, and he suggested that I go to stock 4.1, root w/ saferoot, then flash a kitkat custom rom without Knox through TWRP. That way, I could use triangle away and flash stock unrooted if I needed to send it in.
Although, I'm not sure if I should do that, as I thought I read that you need to update the radio and bootloader first before you can install a custom kitkat rom from jelly bean, but I'm still not entirely sure how that works.
The most recent release of many custom ROMs will not work but you may not have a signal without an updated modem and you should not be running updated modems on an older bootloader. Doing this could brick your phone.
With a rooted system, OTA updates will not work.
Thank you again for helping walk me through the minutia around this phone.
I think I have a much better understanding of everything now. I read the following article on Knox (http://omegadroid.co/wanted-knox-void-warranty-0x1/) and with an understanding of that, I get now that there is no way to load any custom rom on 4.3 or higher without losing my warranty.
So, basically my options are to stay at 4.1 and flash whatever, using triangle away to erase my tracks. Or, I could update to 4.3, but only be able to use saferoot/towelroot, otherwise I'd trip the warranty void. But, if all I did use was towelroot (no custom recovery or rom), then I could just unroot the phone using the full unroot option in SuperSU and send it on in for service if needed, right?
Also, I did unroot my phone and did a factory reset, so it's back at 4.1.1 and unrooted. Yet, I still do not see any software updates available from Samsung. I even plugged it into Kies, and nothing (http://i.imgur.com/E0xPGpf.png). Does anyone know why this could be? Does it have something to do with my not having a carrier for the phone yet? I'm sorry for all the questions, but I do appreciate your help.
jateed said:
Thank you again for helping walk me through the minutia around this phone.
I think I have a much better understanding of everything now. I read the following article on Knox (http://omegadroid.co/wanted-knox-void-warranty-0x1/) and with an understanding of that, I get now that there is no way to load any custom rom on 4.3 or higher without losing my warranty.
So, basically my options are to stay at 4.1 and flash whatever, using triangle away to erase my tracks. Or, I could update to 4.3, but only be able to use saferoot/towelroot, otherwise I'd trip the warranty void. But, if all I did use was towelroot (no custom recovery or rom), then I could just unroot the phone using the full unroot option in SuperSU and send it on in for service if needed, right?
Also, I did unroot my phone and did a factory reset, so it's back at 4.1.1 and unrooted. Yet, I still do not see any software updates available from Samsung. I even plugged it into Kies, and nothing (http://i.imgur.com/E0xPGpf.png). Does anyone know why this could be? Does it have something to do with my not having a carrier for the phone yet? I'm sorry for all the questions, but I do appreciate your help.
Click to expand...
Click to collapse
What is your cell service? If not AT&T, you will never get OTA.
Whether you get OTA can vary from carrier to carrier and phone to phone in my opinion.
I have a Rogers HTC One X that gets OTA updates from HTC even though I am on the Bell network.
I have a Bell S3 that is running on the Rogers network and it receives OTA updates from Bell even though it has a Rogers sim card in the phone.
I have a Telus Moto G running on the Bell network and it received the Telus KK OTA update while connected to the Bell network.
audit13 said:
Whether you get OTA can vary from carrier to carrier and phone to phone in my opinion.
I have a Rogers HTC One X that gets OTA updates from HTC even though I am on the Bell network.
I have a Bell S3 that is running on the Rogers network and it receives OTA updates from Bell even though it has a Rogers sim card in the phone.
I have a Telus Moto G running on the Bell network and it received the Telus KK OTA update while connected to the Bell network.
Click to expand...
Click to collapse
Well, I have an AT&T model which I unlocked and will be putting on Cricket at the end of the week (when my plan month is set to end). Right now there's no SIM in it, and I've been doing everything over wifi. I looked up whether the carrier had something to do with the OTAs, and I was told that Samsung sent the updates out, not AT&T, so I figured that the carrier info was irrelevant. I now wonder what my options are.
Can I manually flash 4.3 stock without tripping the knox warranty void?
Does Towelroot/Xposed framework trip the Knox void flag?
If I can update to 4.3/4.4 and root without tripping the knox flag, I might just manually update and just run towelroot and xposed to modify my OS the best I can until my warranty runs out.
If I can't root it at all once I'm on 4.3+, then I'll just sit on 4.1.1 for a few months until I can't stand it anymore and just void the warranty anyway.
Thanks again everyone. This whole knox/binary counter thing is not something I dealt with on my CDMA LG or Nexus, so I was totally in the dark about how it all worked. This is also my first GSM phone, so all those intricacies are new to me too. Once I know about manually flashing stock and running towelroot/xposed, I think I'll be in good shape.
Flashing the stock 4.3 ROM should not trip the counter as long as you do not need to install a custom recovery to flash it.
Apparently, the latest KK stock ROM cannot be rooted using Towelroot.
If you want a custom ROM, use one that will work with a 4.1.1 bootloader and modem. Once on 4.3 or higher, it's a little harder to recover from a soft brick.
audit13 said:
Flashing the stock 4.3 ROM should not trip the counter as long as you do not need to install a custom recovery to flash it.
Apparently, the latest KK stock ROM cannot be rooted using Towelroot.
If you want a custom ROM, use one that will work with a 4.1.1 bootloader and modem. Once on 4.3 or higher, it's a little harder to recover from a soft brick.
Click to expand...
Click to collapse
Excellent. If I did flash stock, i would just use ODIN, then factory reset to wipe the caches. And that's good to know about the KK rom, as I would probably update straight to 4.4 if at all (I've read a lot of bad things about 4.3 on the S3), but not if it means I cannot root safely and cleanly.
I'll check out the custom roms for 4.1.1. I know that flashing the rom and/or a custom recovery will trip the binary counter, but I can just use triangle away to clean that up. Do you know if there is a list of custom 4.1.1/4.1.2 roms somewhere, or do I need to scour the older threads here?
Thank you very much audit13 (thanks to StoneyJSG and pre4speed as well). You have been immensely helpful and really brought me up to speed on everything surrounding S3 customization. Needless to say it's way more complicated than what I've dealt with from LG and Google/Asus. (I mean, i could root my nexus with a single click using Wugfresh's toolkit)
4.1.1 is the only complete stock ROM that AT&T released for flashing via Odin.
4.3 ROMS and higher were prepared by XDA members for flashing in either a custom recovery or Odin.
audit13 said:
4.1.1 is the only complete stock ROM that AT&T released for flashing via Odin.
4.3 ROMS and higher were prepared by XDA members for flashing in either a custom recovery or Odin.
Click to expand...
Click to collapse
Oh, so what other way can you flash a stock rom, if not through ODIN or a custom recovery? Regardless, it seems as though I really should not dive into 4.3+ until I'm ready to concede that my warranty is over. There are just too many potential pitfalls and headaches.
On the lighter side, I've found a few 4.1.2 based custom roms that have some promise. I'm going to post them here in case anyone has opinions on them, or if someone else in my situation sees this thread and wants to go custom 4.1 too:
Hyperdrive RLS16
http://forum.xda-developers.com/showthread.php?t=2176793
Slim Bean-d2
http://forum.xda-developers.com/showthread.php?t=1865262
Jedi Academy
http://www.teamandroid.com/2013/12/...oid-412-jedi-academy-jelly-bean-custom-rom/2/
Jelly ‘Beans’
http://www.teamandroid.com/2013/04/...ndroid-412-att-galaxy-s3-sgh-i747-custom-rom/
I was also torn when I got my s3 that was running 4.1.2. I downgraded to 4.1.1, sim unlocked the phone, used it on stock 4.1.2 for about a week to make sure everything was working, hardware wise, upgraded to stock 4.4.2, installed a custom recovery and a custom ROM. I wasn't too concerned about the warranty since I got the phone as a free upgrade and had no intention of using the s3 as my daily phone. I kept it as a backup until my niece needed and phone and then it went to her. It's been over a year and there are still no problems with the phone.
Hi there,
I have the Samsung Galaxy Tab S 8.4 LTE version, which I purchased through Ebay - I believe it came from Asia somewhere as it showed up with an international adapter for the power supply. It was sold as a "Verizon" model - I ditched that sim card and have been using it with Bell Mobility in Canada.
Recently, I tried to update my firmware using the latest version of Samsung Kies and I'm running Windows 10 latest version. For some reason Kies needs to reinstall the USB driver before performing the update to the firmware and this causes Windows 10 to crash without fail. (This is also happening to my Note 3 - Samsung informs me Kies is not compatible with Windows 10 although it seems to work for everything else - just not the update). Kies doesn't seem to care that I already have the latest drivers installed.
I can't update via the tablet because my device has been "modified" - rooted.
Finally I went to Sammobile for the firmware, however I can't find any US firmware for a compatible carrier under SM-T705. I am debating flashing the Bell Canada firmware, but the model is listed as SM-T705W. In case this is not ok and I need to revert to the original, I'm hoping someone can help me identify my build? The samsung agent offered to identify it but once she discovered it was from outside Canada she said she had no information. So much for Samsung International!
Please help! I'm having battery issues and I'm hoping updated firmware will help, plus I would like to have the latest version of Android. Thanks!
If you're in Canada then just flash the Canadian firmware.
ashyx said:
Cellular south is us
Region XAR
Click to expand...
Click to collapse
Hi there, forgive me for being thick, but how do you tell it's Cellular south, and what do you mean by region XAR? I'm sure that the fellow I bought this unit from flashed US firmware, however I can't find it on the Sammobile site - in fact I can't find any US carrier firmware listed for this model.
As mentioned above, I did find Bell mobility (Canada) firmware listed for the SM-T705W but nothing for the SM-T705.
Further explanation greatly appreciated!
LostinCanada said:
Hi there, forgive me for being thick, but how do you tell it's Cellular south, and what do you mean by region XAR? I'm sure that the fellow I bought this unit from flashed US firmware, however I can't find it on the Sammobile site - in fact I can't find any US carrier firmware listed for this model.
As mentioned above, I did find Bell mobility (Canada) firmware listed for the SM-T705W but nothing for the SM-T705.
Further explanation greatly appreciated!
Click to expand...
Click to collapse
You can flash any firmware for that model, so just flash the Canadian firmware, no point in flashing a us firmware.
ashyx said:
You can flash any firmware for that model, so just flash the Canadian firmware, no point in flashing a us firmware.
Click to expand...
Click to collapse
Ok great. I would like to locate the US firmware though for future use. I travel alot in the US and in the event I need a different carrier's modem... Are the US carriers listed somewhere else or am I blind? http://www.sammobile.com/firmwares/search/SM-T705/
Thanks!
LostinCanada said:
Ok great. I would like to locate the US firmware though for future use. I travel alot in the US and in the event I need a different carrier's modem... Are the US carriers listed somewhere else or am I blind? http://www.sammobile.com/firmwares/search/SM-T705/
Thanks!
Click to expand...
Click to collapse
You have root so install twrp from the development section and do a full back up of your current system.
You can then restore as you please.
Seems no US firmware for the t705.
ashyx said:
You have root so install twrp from the development section and do a full back up of your current system.
You can then restore as you please.
Seems no US firmware for the t705.
Click to expand...
Click to collapse
LOL... ok now I have another problem. I had already downloaded the Bell mobility file from Sammobile and hadn't seen this response - in the meantime I hooked up with Odin and my download failed twice - I don't get it. I just did my Note 3 10 minutes ago without any issues. Rebooted device and odin between both attempts.
Thoughts?
Don't flash anything until you make that full backup with TWRP, trust me it will save a massive headache should you need it.
Download Flashfire from the link below then set your date back to August, run Flashfire then load up the firmware, select the Flash firmware package option.
From the partitions list select system.img and boot.img only.
Under the reboot options select download mode then hit the flash button.
Once it has flashed and booted to download mode you will need to flash a lollipop bootloader (assuming you are flashing lollipop?)
You will find them in the bootloader thread.
After that just reboot the tablet, it will take about ten minutes for it to fully boot.
http://likewaphd.in/filewap-1-load/...2015/FlashFire_Pro_v0.21_-_Likewap.apk-0.html
Uh... ok you lost me early on. I downloaded the file - how do I install it? I remember using the TWRP thing several phones back when I was messing with custom ROMs. I had a problem with recovery and since then have never gone this route - I've been happy with stock rom and root - installed using Odin... sortof the KISS principle.
I can try TWRP, but could you dumb down the instructions a bit - as I mentioned, I'm a bit thick - particularly with some of the terminology! LOL
This is the file I downloaded - yes, Lollipop - I don't understand why I have the Odin Fail - google isn't helping me understand either. I have root, USB debugging is enabled and I followed the same steps as with my Note 3 - the message said write fail.
http://www.sammobile.com/firmwares/download/52301/T705WVLU2BOE4_T705WOYA2BOE4_BMC/ Is this what you mean by bootloader?
TWRP - flash with odin then boot into twrp using POWER + HOME + VOL UP - http://forum.xda-developers.com/gal...p-2-8-6-1-unofficial-sm-t800-805-807-t3074633
Bootloader - http://forum.xda-developers.com/showthread.php?t=3099362
ashyx said:
TWRP - flash with odin then boot into twrp using POWER + HOME + VOL UP - http://forum.xda-developers.com/gal...p-2-8-6-1-unofficial-sm-t800-805-807-t3074633
Bootloader - http://forum.xda-developers.com/showthread.php?t=3099362
Click to expand...
Click to collapse
Ok but those "bootloaders" are custom ROMS are they not? And I don't see my device on the TWRP site - I have the LTE version, it only shows Wifi.
Really all I want to install the Bell stock firmware (assuming it is indeed compatible - SM-T705 vs SM-T75W) I linked to from the Sammobile site and then do Chainfire's auto-root.
Why isn't Odin writing the firmware to my device? I've never had this issue before and I don't see what I might have done differently with this device - it's the first time I've tried to update it, but I had no trouble rooting it with the chainfire auto-root.
LostinCanada said:
Ok but those "bootloaders" are custom ROMS are they not? Really all I want to install the Bell stock firmware (assuming it is indeed compatible - SM-T705 vs SM-T75W) I linked to from the Sammobile site and then do Chainfire's auto-root.
Why isn't Odin writing the firmware to my device? I've never had this issue before and I don't see what I might have done differently with this device - it's the first time I've tried to update it.
Click to expand...
Click to collapse
No they are bootloaders they are required to boot the firmware , roms are the os.
Odin won't flash because certain devices will refuse to flash another regions firmware.
My advice to you is to flash the lollipop bootloader first, to make sure it will flash then flash the firmware with flashfire.
Obviously make the twrp backup first.
ashyx said:
No they are bootloaders they are required to boot the firmware , roms are the os.
Odin won't flash because certain devices will refuse to flash another regions firmware.
My advice to you is to flash the lollipop bootloader first, to make sure it will flash then flash the firmware with flashfire.
Obviously make the twrp backup first.
Click to expand...
Click to collapse
Ok I flashed the bootloader, and then I tried to flash the firmware with Odin again but it still won't do it - write fail again. I've never used flashfire - windows 10 won't open it...
UDATE: Ok I read to transfer the file to the download folder on the tablet, and then install on tablet. So I did that, but when I click on the icon it doesn't run. How the heck do I use this to install the firmware update?
Figured out the date bit, ran Flashfire.... problems during the install - got stuck in boot loop - tried a factory reset - that didn't work... stuck in loop. I think I'm bricked....
Left the default settings in place - very little in the way of instructions - read the bit about not trying to write over protected settings...
And got this:
You're not bricked as long as the tablet starts up and you can boot to Download mode.
I've seen that error with corrupt downloads so not sure why you're getting it.
Reboot to download mode. Just hold POWER + HOME + VOL DOWN until the device restarts and boots to download mode.
Doesn't matter if it's boot looping.
Reflash TWRP and restore the backup you made earlier. You will be back to where you started.
At this point I think the best option is to flash a custom lollipop rom.
There is a very good one I use on my t805 which is practically stock with a bit of bloatware removed.
Its in the development section called sweetrom.
At least one positive is that you were able to flash the lollipop bootloader, so upgrade is not impossible.
I'm definitely able to get to download mode - I was surprised that the factory recovery mode didn't work. I'm wondering if the file from sammobile is corrupted - I used the same file with Flashfire - now I think Odin was trying to save me. I'm downloading the same file again fresh, and it looks like Telus and possibly the other Canadian variants are the same - unless it's the same corrupted file.
I just hope the problem isn't because my phone identifies itself as a straight SM-T705. That is why I asked about that point earlier. There are plenty of straight 1705 options available - just don't know which country would be compatible - particularly for the modem.
I didn't understand how to use TWRP and I've had problems with it in the past (recovery) when I did figure out how to use it and was messing with custom ROMS a couple of years ago. I would really like to get myself back in order with a proper stock ROM and root. This tablet belongs in my car and right now I just want it to work properly - I'm using Torque to resolve some ongoing engine issues and it will suck if I have to go back to using the small screen on my Note 3.
If there is any way to figure out which of those countries for the 705 are compatible with Canadian carriers, in case this Bell firmware is defunct, that would be appreciated.
As well, is that bootloader going to cause any problems with stock firmware? I've already flashed it - does stock firmware come with bootloaders included?
OK before I go any further with this I need you to install twrp and make that back up. Twrp is now very stable.
Twrp will back up some very important partitions namely the Efs and modem. Don't take this warning lightly. The amount of people that have soft bricked their device because they didn't do this.
Boot into twrp then simply select the backup option and make sure the partitions on the left are ticked particularly boot,
Efs and modem.
Now as regards which firmware.
I would forget about installing the Canadian firmware.
It looks like this firmware will only install specifically on a Canadian device.
It doesn't really matter which firmware from which region you install as they are pretty much all the same except for the carrier ones which just add more bloat and some csc specific stuff.
Just go for an international rom. You've already flashed a bootloader from one of these roms so that proves you can flash.
Use odin to flash.
If you have connection issues afterwards then all you need do is restore your modem backup with TWRP.
That's why it's important you do this.
Follow these instructions and we will get you up and running.
Whole again!
Whole again!
For the record, I read elsewhere that it is NOT recommended to flash other letter variants of a model. In the meantime I downloaded all four Sammobile Canadian Carrier files and they appear to be the exact same file and all install attempts failed For anyone else with an actual SM-705W I read in this thread: http://forum.xda-developers.com/galaxy-tab-s/general/t705-lollipop-t3099945 a fellow Canadian was having a problem with those same files. Dunno what happened with him in the end, however I tried one more W file I found elsewhere that appeared to be different but it failed as well.
Based on the comments in the above thread, I flashed the Hong Kong variant for the SM-705 from Sammobile - apparently it was the first firmware widely available and users from several countries posted they had used it successfully. So far it seems to be working ok - after flashing it, I did a factory reset on the device as was also recommended in the above thread. Sure hope the battery life will be better than before - love this tablet but I've never seen a device drain so rapidly! CF-Auto Root restored!
As a side note my Ebay seller did reply to my origins query and was helpful once he realized I wasn't complaining about the device and wanting to return it... LOL. Apparently my unit originated in Singapore and arrived with that firmware along with a Verizon SIM which I never tested. As long as the OS is smooth, and the modem compatible, and unless someone advises a better country variant, I guess I'll stick with this one.
Now just need to get Torque reconfigured!
I need help, I don't know wtf I was thinking, my sprint s6 is on CPF4 and sim UnLocked, I was going to upgrade to PL3, with Odin, run CF-Auto Root Next, Then TWRP, Then Flash TDH-JR v1.0 .... I Ran CF-Autoroot First like a idiot, I'm rooted on CPF4, tried to go ahead and remain calm and used Flashify to Flash TWRP, only to get stock recovery and if it worked was going to stay on CPF4 and figure something out but, this phone is Sim Unlocked, and I'm starting to worrying I'm going to lose it
UPDATE: SOLVED , NOW ROCKIN DEBLOATED. JAH, ITS BADASS, INSTALLING BLACKED OUT EVERYTHING RIGHT NOW!!! QUESTIONS JUST ASK, OR ILL BE BACK TO TELL WHAT I DID WRONG
Ps: HAHA AND IM STILL UNLOCKED USING METROPCS
Did you get sorted out or do you still need help? Typically if you update an unlocked phone's firmware, you will be locked again and will need to unlock. Not what you want to hear, I am sure, but that is as much as I know on the topic.
not for me. I am using an unlocked S6 Sprint now outside US and have been updating firmware so many times, the phone wont be locked again UNLESS you change the CSC (SPR, XAS...).
yaibakt said:
not for me. I am using an unlocked S6 Sprint now outside US and have been updating firmware so many times, the phone wont be locked again UNLESS you change the CSC (SPR, XAS...).
Click to expand...
Click to collapse
Interesting and I did not know that. How would the OP know if it was safe to upgrade? Check that his current (or prior version, not sure where he is in the process) was SPR and then proceed to use a TAR that was the same?
koop1955 said:
Interesting and I did not know that. How would the OP know if it was safe to upgrade? Check that his current (or prior version, not sure where he is in the process) was SPR and then proceed to use a TAR that was the same?
Click to expand...
Click to collapse
Not necessary either.
I did tried to download different tar files of the same Sprint firmware version which are SPR, XAS,... and guess what? They are exactly the same, even every bit.
That means, OP could flash any csc tar file, as long as its for s6 sprint (g920p***** tar file). The phone stays unlocked still.
The only thing that locked my s6 back was when i used Samsung phone info app to change the CSC. The phone rebooted and locked. I had to unlocked it again and it costed me some bucks...
How did you unlock your phone?
Hello guys,
For some reason, my phone shows that my SIM is locked ( I was on RR 6.0). I need to flash the 4.1.1 firmware for Koodo to unlock the SIM.
Can anyone send me a link for this firmware?
Thank you!
You don't need Koodo to unlock the sim. Just flash the stock LJ2 firmware with Odin and use the dialler menu to permanently network unlock the phone.
https://forum.xda-developers.com/showthread.php?t=2014982
Maybe this will work: http://rapidgator.net/file/0207e341...yos.com/samsung-galaxy-note-2-stock-firmware/
I know it's been a long time, but did this procedure actually WORK? AFAIK, Koodo Note 2s never came with less than KitKat, and we all know that Samsung has blocked downgrading though its bootloader starting then.
The reason I ask is I'm looking for a spare phone for mine as a backup and can't seem to find one on which I can load my Jellybean 4.1.2 CM based phone image.
Well this an interesting post, I have a similar problem, I have 2 exact Note 2 phones one with custom firmware (4.1.1) one without, I would like to copy/clone the stock firmware to my other (as I somehow managed to delete the stock firmware on it)
Now I have made a backup with TWRP and copied it to the other phone but TWRP refuses to install it, it tries to install and gets most of the way but at the very end I get the 255 error "install failed"
Why can't I copy/ install this backup?
Do I need to to use some other recovery software or make a backup some other way.
Thanks
Old faithful said:
I know it's been a long time, but did this procedure actually WORK? AFAIK, Koodo Note 2s never came with less than KitKat, and we all know that Samsung has blocked downgrading though its bootloader starting then.
The reason I ask is I'm looking for a spare phone for mine as a backup and can't seem to find one on which I can load my Jellybean 4.1.2 CM based phone image.
Click to expand...
Click to collapse
The note 2 sgh-i317m was used by Telus, Rogers, and Bell.
This downgrade method works. I've used it to network unlock four note 2 models.
The stock 4.1.1 firmware from sammobile.com did not contain a bootloader file which allowed me to flash it using Odin on a phone running a stock 4.4.2 rom.
audit13 said:
The note 2 sgh-i317m was used by Telus, Rogers, and Bell.
This downgrade method works. I've used it to network unlock four note 2 models.
The stock 4.1.1 firmware from sammobile.com did not contain a bootloader file which allowed me to flash it using Odin on a phone running a stock 4.4.2 rom.
Click to expand...
Click to collapse
Man, if this really works it's going to solve all my problems. Are you saying you can flash the 4.1.x ROM on top of the the 4.4.2 bootloader (presumably one could deselect the bootloader from the 4.1.x ROM if it was included - sorry I'm quite rusty at this, haven't used Odin in years), so that the phone may be running ICS or JB despite having a 4.4.2 encrypted (locked) bootloader?
The idea is being able to load Clockworkmod recovery and from it, the rooted 4.1.2 backup on my external sd card...
Sorry if it's been asked before and if I may be confused - Thing is, I haven't done this type of tweaking in 5 years
I could flash a stock 4.1.1 ROM from sammobile.com on top of a stock 4.4.2 ROM because the stock 4.1.1 ROM didn't contain a bootloader. I did this to use the menu method to network unlock the sgh-i317m; however, the phone cannot stay on a stock 4.1.1 ROM with a 4.4.2 bootloader because the phone cannot connect to a cellular network with this 4.1.1 ROM/4.4.2 bootloader combination. After I unlocked the phone, I either re-flashed a stock 4.4.2 ROM or a new custom ROM.
The bootloader on the Canadian Note 2 was never locked the way it was with some USA carriers.
audit13 said:
The bootloader on the Canadian Note 2 was never locked the way it was with some USA carriers.
Click to expand...
Click to collapse
Are you saying the Koodo/Rogers.... 4.4.2 Note 2 bootloader is NOT locked on our phones, ergo, that I could downgrade to 4.1.1 including its bootloader successfully?! If so I'm set, I could purchase a used one on kijiji and simply reload my old Bell based ROM backup on it I simply look for a way to load my 5 year old Rooted ROM onto a newer version of the phone. I have on it apps that won't run on 4.4.2 that I sorely miss on my tablet (which runs 4.4.4)
The bootloader is not locked which allows for the installation of TWRP and cwm but it cannot be downgraded.
audit13 said:
The bootloader is not locked which allows for the installation of TWRP and cwm but it cannot be downgraded.
Click to expand...
Click to collapse
In other words it does allow for installing the 4.1.1 ROM for unlocking the phone, but it can't can't actually be used with the 4.1.1 ROM... What if I simply reinstalled the 4.4.2 modem, wouldn't that work?
I now I'm asking quite a lot - but in my case if I haven't been able to find a used phone that hadn't been at some point 'upgraded' and consequently became shackled (I've been looking for over a year now) in which case I might as well mourn it and move on to a new phone and start the fight for freedom all over again Honestly, I've grown tired of having to fight for the basic right of ownership against the relentless push for slavery that is the general trend in technology, to force people away from freedom of using the software they prefer and force them into a system where they must follow the dictates of corporate giants so perfectly exemplified by the cell phone, computer and browser based service industry.
Like Frederick Douglass famously said "Power concedes nothing without a demand. It never had and never will"... In other words if you want freedom and true control, you MUST FIGHT the providers and the manufacturers whose prime interest is to keep you enslaved
Installing the 4.4.2 modem will install but the stock 4.1.1 dialer doesn't work with a 4.4.2 modem and 4.4.2 bootloader from what I recall. It's been a long time since I had a note 2.