Question for the US owners of the N975F/DS - Samsung Galaxy Note 10+ Questions & Answers

This is a question for all of those US users of the N975F/DS model. How does the phone reception/data reception, carrier aggregation, voice calling, LTE etc. perform on this model with the main US carriers? (Verizon, TMo, US Cellular, Sprint, ATT).
Getting an idea before I spring for one.

I answered this elsewhere. Using 975f/DS on ATT. In the main the device is fine. Sometimes I have dead spots, where, even though I see 5 bars, I don't have data. NO VoLTE which is annoying as data drops to H when I'm on a call. Bit I value the flexibility of dual SIM so it's a trade off. Plus you can but them on eBay for $899 at the moment!

Related

Let me get this straight - So TP2 is not a true "world phone"?

I'm a little green when it comes to 3G stuff, but please correct me if I am wrong...
Yes, you can put foreign SIM cards in US TP2's but not get 3G coverage in Europe. On the other hand from what I have read, European TP2's (even the unbranded ones) will not work with 3G is the US.
And if I am wrong... can someone please point me to a TP2 that will work on 3G networks in most of the world?
Or does one have to have two TP2's to enjoy 3G.. one for the US, and one for Europe, etc.?
quid246 said:
I'm a little green when it comes to 3G stuff, but please correct me if I am wrong...
Yes, you can put foreign SIM cards in US TP2's but not get 3G coverage in Europe. On the other hand from what I have read, European TP2's (even the unbranded ones) will not work with 3G is the US.
And if I am wrong... can someone please point me to a TP2 that will work on 3G networks in most of the world?
Or does one have to have two TP2's to enjoy 3G.. one for the US, and one for Europe, etc.?
Click to expand...
Click to collapse
Where have you heard that a NA TP2 won't work with 3G in EU?
The only limitation I'm aware of is a NA TP2 won't work w/ NA GSM 3G.
Oh SoS said:
Where have you heard that a NA TP2 won't work with 3G in EU?
The only limitation I'm aware of is a NA TP2 won't work w/ NA GSM 3G.
Click to expand...
Click to collapse
Until someone hacks it
I can't remember where I read it. But someone said if you wanted 3G in Europe, better to get a Euro unbranded model.
So perhaps this is under the assumption that it isn't hacked... not sure.
Slightly, off-topic Q but rather than start a new thread.... once a HardSPL is out for both the CDMA and GSM TP2's... will they effectively be "equal" devoces?
I really would like to pick-up a TP2 in the next few days... I like the VZ unit, but it's CDMA and since I travel quite a bit, really prefer and need more of a GSM phone, but don't like the TMO as no 3.5mm jack.
quid246 said:
I can't remember where I read it. But someone said if you wanted 3G in Europe, better to get a Euro unbranded model.
So perhaps this is under the assumption that it isn't hacked... not sure.
Slightly, off-topic Q but rather than start a new thread.... once a HardSPL is out for both the CDMA and GSM TP2's... will they effectively be "equal" devoces?
I really would like to pick-up a TP2 in the next few days... I like the VZ unit, but it's CDMA and since I travel quite a bit, really prefer and need more of a GSM phone, but don't like the TMO as no 3.5mm jack.
Click to expand...
Click to collapse
The Verizon unit already has international GSM bands unlocked, AND international (2100MHz 3G). If you've been a Verizon customer for 60 days or more you can call them up and get an unlock code for free and use any SIM card in your phone so you can get a cheap prepaid SIM and not pay the high Verizon roaming costs. There's also a small (I'd say around 25%) chance that the NA 3G bands will be found/unlocked, but at this point who really knows if they are there or not.
Actually the Telus CDMA TP2 supports the European 3G bands but not the American ones becuase technically you will be using it in North America on CDMA and outside America on GSM. So its the other way around
It seems that if you have the Sprint TP2 that it won't register at all on US GSM networks, but comes unlocked by default.
On Verizon (which I have) a simple phone call to support they'll give you the unlock code and you're good to go. I use an Orange (UK) Sim in mine just fine in the US and others in other forums have reported that using US SIM's from TMobile/AT&T work fine also in the US.
--chris
TP2 = best 'World' phone I've ever owned.
quid246 said:
I'm a little green when it comes to 3G stuff, but please correct me if I am wrong...
Yes, you can put foreign SIM cards in US TP2's but not get 3G coverage in Europe. On the other hand from what I have read, European TP2's (even the unbranded ones) will not work with 3G is the US.
And if I am wrong... can someone please point me to a TP2 that will work on 3G networks in most of the world?
Or does one have to have two TP2's to enjoy 3G.. one for the US, and one for Europe, etc.?
Click to expand...
Click to collapse
I have an unbranded HTC factory TP2, and it works in 3G mode anywhere I take it that has the 3G network... and I travel all over the US/Caribbean and back to EU/UK. Have not found one spot it hasn't worked (inlcduing some of the very obscure Carib countries), and I like the fact that it automatically picks up HS when within range without having to change any settings.
Just have to make sure that your provider gives you a 3G SIM (most of them are these days) and that you have the 3G service enabled on your account in the respective country.
Many people say they can't pick it up yet don't have it on their account, or think that their EU provider will automatically provide it as part of the roaming service... which is not a good assumption to make.
TyTanIc said:
I have an unbranded HTC factory TP2, and it works in 3G mode anywhere I take it that has the 3G network... and I travel all over the US/Caribbean and back to EU/UK. Have not found one spot it hasn't worked (inlcduing some of the very obscure Carib countries), and I like the fact that it automatically picks up HS when within range without having to change any settings.
.
Click to expand...
Click to collapse
3G in North America? I doubt that. The phone does not support North American 3G bands. Are you sure it was 3G in North America??
Man, this is all confusing... I swear somebody has to come up with an HTML table of what phones work with what and where and stickify it.
Can people just put this to bed already!!!
The Sprint (North America) TP2 is suppossed to be used on CDMA in the US and GSM worldwide, hence the GSM radio is unlocked for outside America GSM use. This is how it comes default. If that is so hard to grasp, then there is no hope for some, sadly.
As for the title, the TP2 is a world phone, it works in the US (and North Ameria) on CDMA and elsewhere unlocked on GSM. That to me is the true definition of a World phone from a U.S CDMA perspective (and especially moreso as this is the CDMA version).
To put it in perspective, a Sprint customer (in this case, moi) gets the best of CDMA in the U.S and when traveling to visit his sister in High Wycombe in the U.K (like i'll be doing this Autumm) gets to pop in a PAYG U.K sim in the same phone and use it while over there. This phone doesn't get any "worldlier" to me than this scenario!!
Is the O.P attempting to specifically define a dual mode CDMA/GSM-unlocked World phone as not world phone because it's locked by default from doing GSM in it's primary market which happens to be CDMA (and in this case Sprint)?
This is not rocket science folks, it really isn't.
LordLugard said:
Is the O.P attempting to specifically define a dual mode CDMA/GSM-unlocked World phone as not world phone because it's locked by default from doing GSM in it's primary market which happens to be CDMA (and in this case Sprint)?
Click to expand...
Click to collapse
Point taken. It's just that with that same Sprint phone (correct me if I am wrong), you can't travel to Canada pop in a Rogers SIM card and get Rogers 3G.
Wouldn't the phone want to swing towards it's CDMA cousin, Telus or Bell?
mmmhhh86 said:
3G in North America? I doubt that. The phone does not support North American 3G bands. Are you sure it was 3G in North America??
Click to expand...
Click to collapse
AT&T 3G runs on 850/1900 GSM, the TP2 supports both of those bands, how would it not work with 3G on AT&T in the US?
T-Mobile runs 3G on 1700/2100 GSM bands, both of which aren't included on the TP2, as far as my research has lead me to believe.
Basically while it may be a quad band GSM phone, it is only a dual band 3G device. It comes in two flavours - UMTS 900+2100 or UMTS 1900+850
The 900/2100 version is far more common than 850/1900
.mak said:
AT&T 3G runs on 850/1900 GSM, the TP2 supports both of those bands, how would it not work with 3G on AT&T in the US?
T-Mobile runs 3G on 1700/2100 GSM bands, both of which aren't included on the TP2, as far as my research has lead me to believe.
Click to expand...
Click to collapse
It supports those bands for HSDPA CDMA not GSM 3G
Network 3G EVDO Rev A (800/1900 MHz), UMTS/HSPA (2100 MHz), GSM/ EDGE (850/900/1800/1900 MHz)
This is the Telus version btw
quid246 said:
Point taken. It's just that with that same Sprint phone (correct me if I am wrong), you can't travel to Canada pop in a Rogers SIM card and get Rogers 3G.
Wouldn't the phone want to swing towards it's CDMA cousin, Telus or Bell?
Click to expand...
Click to collapse
"it Depends"
The US CDMA phone operates in 3 modes.
1 CDMA Only
2 GSM Only
3 'Global' (whatever it can find).
If you have it in Global it will generally take the CDMA local carrier over anything else. However, not always. I've had mine switch to GSM for a bit then go back to CDMA. But mine is Verizon and unlocked so it works everywhere in the US and I also have a UK sim card in it. So I'm a little 'different'.
But, in any case, you can tell the phone which mode to use if you want. All upto you.
--chris
(verizon TP2)
here we go again... (tp2 3g na)
"I have an unbranded HTC factory TP2, and it works in 3G mode anywhere I take it that has the 3G network... and I travel all over the US/Caribbean and back to EU/UK. Have not found one spot it hasn't worked (inlcduing some of the very obscure Carib countries), and I like the fact that it automatically picks up HS when within range without having to change any settings."
So, maybe he's wrong. But either way...
You wanna know why this keeps coming up again and again?
(not because we're all dumb and thick headed, which we may very well be)
But,
Because we just have trouble imagining them hardware "band amplifier" hobbling the hardware when it's so much easier to do it somewhere in firmware.
We all know that the less you fiddle with the hardware for multi-region functionality the less you have to fiddle with the production line and fiddling with the production line is the Last Thing a manufacturer wants to do.
Someone even once said that there wasn't room in the Rhodium platform for quad band data support. But now we're expecting the tilt 2 to do just that.
So, all protestations aside, those of us who paid ~700 us clams for this beauty, and who like the kbd layout.
And who have like me (as quite the Early Adopter), forked out for an sx56, sx66, 8135, x7510((quad band data)
Just feel a leetle wee bit of a sense, dare I say it, of Entitlement for the TP2 to be enabled into a fully world wide phone.
So we keep hunting, and digging, and dreaming, and .... posting.....
well here is my two cents i have the original unlocked euro version of the tp2 and all i get in the us it edge. it is really impossible to get 3g in the US (2100) because this version of the phone literally does not have the attena for it. and so that you can see all the different types of tp2s and the technical and physical differences between them here is a link: http://pdadb.net/index.php?m=pdacom...&id3=1792&id4=1829&id5=1766&id6=1989&id7=1751
drae1980 said:
well here is my two cents i have the original unlocked euro version of the tp2 and all i get in the us it edge. it is really impossible to get 3g in the US (2100) because this version of the phone literally does not have the attena for it. and so that you can see all the different types of tp2s and the technical and physical differences between them here is a link: http://pdadb.net/index.php?m=pdacom...&id3=1792&id4=1829&id5=1766&id6=1989&id7=1751
Click to expand...
Click to collapse
3g in the USA must be on the 1700 band then, as thats the only gsm band that the euro version doesn't support.
Euro version
GSM850, GSM900, GSM1800, GSM1900, UMTS900, UMTS2100
TMOUS version
GSM850, GSM900, GSM1800, GSM1900, UMTS1700, UMTS2100
Anyone know of a good site to order a prepaid SIM card? I plan on using my VZW TP2 in Spain and France. I was also wondering if I should or could disable data and use my TP2 with Garmin XT so I don't get nailed for data usage. Your thoughts would be appreciated...
Mugs

Telus TP2 Radio(s)

Exactly what cellular radios does this phone [Telus TP2] have?
My carrier [Telus] has recently completed their 3G overlay, and I'm still showing "EV".
Should I be talking to them about fixing this, or...?
It was (is?) my understanding that this phone was fully 3G capable.
Can someone help me with this?
As far as I can tell, my phone should support the Telus overlay of HSPA on their CDMA network, however I'm showing "EV" an my network type on the notification bar.
I visited a Telus store, and talked to a rep, who just babbled to me about how my SIM was "registered" as a CDMA phone, and therefore I couldn't use HSPA.
>_>
Thoughts?
EDIT: The rep also fed me this convoluted bullsh*t about how when I'm roaming, I'll be able to be on HSPA networks, so I'll get better bandwidth roaming than on my home network...
Wow no one knows the answer to this?
I've searched, and there's no answer, per se, just descriptions of Telus' technology and the antennae in the TP2, which seems to indicate that the TP2 should be able to get on the Telus HSPA network...
I have a SIM-unlocked Telus Touch Pro2 I bought off Craigslist, figuring it'd be good to go when the HSPA network rolled out (Only four months later!). As I understand it, the telus model can make and receive calls on quad-band GSM frequencies, but only use EDGE speeds for data. Has to do with the firmware for the chipset inside the phone. The only HSPA 3G band the phone can use is 2100 Mhz, which is the bad used in Europe, not Canada. It's a major piss-off, especially when a month ago the stores made this out to be the top-of-the-line phone, perfect for ever and ever.
It would seem that should Telus decide to plug in some firmware upgrades, they could activate the new 3G bands, but why bother? We've already signed away our souls to the company.
Who knows, maybe they'll fix it when they release Windows 6.5 for our rig. Because that's on the top of the to-do list, right?
Well there are new radios that we could flash...would that change anything?
Now I may be misinformed but I think that the Telus version is a CMDA phone with GSM capabilites on some frequencies. I do not think it will work on HSPA in Canada as they use different frequencies (850 and 1900). This is why so many people were waiting for the ATT version to come out as it uses those frequencies.
Remember GSM does not equal 3G.
What I would like to know is whether the distinction between 3G and GSM is on the hardware side, firmware side, or software side. Telus would have you assume it's all the hardware's fault, but I'm not sure on that one.
From everything I have read its the chip in the phone that isnt programmed/capable of doing the frequencies required. It may actually be a second chip but I cant confirm that. Other posts have stated that there wont be a software fix to "unlock the frequencies" needed.
GSM is a cellular line and 3G is a data connection.
I just purchased an At&t Tilt 2 unlocked for use on Telus 3G+ network. The Telus Touch Pro 2 is a CDMA , Quadband GSRM and UMTS/HSDPA 2100. The Telus TP2 will only work with EVDO data on the Telus network. If you unlock it for use with Rogers it will work on GSRM with Edge data. That is why I have ordered the At&t Tilt 2. Unfortunately Telus won't honour my unlimited data plan and say it is only for EVDO and that I have to change to one of their current plans to have HSDPA. Like all of the networks, they get your money one way or the other. I'm pleased that with the Tilt 2 I am free to switch providers here in Canada and still get 3G as well as when I travel in Europe.

Unlocked Issues

I have an HTC TouchPro 2 that I bought from T-Mobile here in the US. While I now have an account with T-Mobile, I was able to get this with no contractual committment. I also happen to have an AT&T Fuze with an account at AT&T. Originally, I wanted to move my cell service to T-Mobile, as I can get the same service for about $30-$40 less per month from T-Mobile than I pay AT&T. However, I have discovered that T-Mobile does not have nearly the data network speed that AT&T does. I can get 3G from T-Mobile, but not nearly as widely as I can with my AT&T phone and service. Consequently, I would like to convert the phone to AT&T. I have unlocked the phone, and upon moving the SIM card from the Fuze to the TP2 I can make AT&T calls with my AT&T number, but moving the SIM card doesn't get me connected to the AT&T data network. I finally figured out how to connect, but I can't get 3G to work.
Does anyone know how to solve this problem?
AT&T and T-Mobile use different 3G frequencies. So your T-Mobile TP2 is not compatible with AT&T 3g frequencies. The best you will get with your AT&T sim in there is EDGE.
Same problem in Oz...
Telstra uses Next-g network - 850Mhz...
Everyone else uses 3G - 900Mhz...
We have the Touchpro 2 Model 7373 (3G) and the 7381 (Next-G)...
Telstra sim in a 7373 variant means edge service but another carrier uses 3G.
Vice Versa in a 7381 model...
Bloody annoying... Should use ALL frequencies, that would be easier, especially as it say 850 - 1800 Mhz on the band page...
Oh, well....
Not exactly what I had hoped to hear. Thanks for the answer. I guess my next step should be to see if there is any hope for T-Mobile to improve their data coverage.

International Note 5 N920i on AT&T

Because I hate the idea of having a neutered AT&T Note 5, I bought an international variant (N920i). It appears the LTE bands are all compatible between the two. I will let everyone know how it turns out. If you already have experience with this, let me know.
EDIT: Yes, N920i works without any modification on AT&T
When does it arrive?
Thats very interesting.
from my SAMSUNG-SM-N920A using XDA Free mobile app
First half of this week hopefully!
Please keep us posted.
@alaskajoel Le us know if you have any signal issues.
The T Mobile S6 Edge on AT&T network gave me some issues. Calls would take 30 seconds to dial out and phone did not ring a bunch.
martinezma99 said:
@alaskajoel Le us know if you have any signal issues.
The T Mobile S6 Edge on AT&T network gave me some issues. Calls would take 30 seconds to dial out and phone did not ring a bunch.
Click to expand...
Click to collapse
Will do. Should be in my hands tomorrow.
Here goes. N920i 64GB
EDIT:
LTE Working with attnextgenphone APN. Made a few phone calls, received one, and so far no odd problems.
I don't see the LTE on the signal bar are you sure it's on LTE?
---------- Post added at 05:02 PM ---------- Previous post was at 04:48 PM ----------
May I ask where you purchased this version?
eroracing said:
I don't see the LTE on the signal bar are you sure it's on LTE?
---------- Post added at 05:02 PM ---------- Previous post was at 04:48 PM ----------
May I ask where you purchased this version?
Click to expand...
Click to collapse
LTE showing up on the signal bar is a Domestic device visual. International versions Show E (edge) 3G, H+ (Faux G) and 4G for LTE.
If you are still unconvinced, my service mode presently shows I am on LTE Band 4. Download speeds at 40mbps this evening. No carrier aggregation unfortunately, but I also didn't have it on my Nexus 6 or the GS6.
I purchased the phone from a seller in Hong Kong via Ebay.
Awesome! Enjoy!
Yep, just like the International S6 G920I that supported AT&T LTE
Sent from my SD4930UR using XDA Premium 4 mobile app
This is excellent news. How much did you pay for that bad boy? Please go to dev settings and see if "allow OEM unlock" is in the options. Thank you.
seh6183 said:
This is excellent news. How much did you pay for that bad boy? Please go to dev settings and see if "allow OEM unlock" is in the options. Thank you.
Click to expand...
Click to collapse
~$900 USD. OEM Unlock is an available option in Developer Options.
I thought I'd give this thread a small bump as I'm about to pull the trigger on an international N920I as well.
My question stems from simply being new to importing phones and having to pay attention to bands. I have bene following this thread closely, and it seems as though the N920I performs well on the AT&T network, but is it the same as if I had bought one from AT&T? I ask only because it was just mentioned that this phone does not have Carrier Aggregation.
I'm not certain what carrier aggregation is (I looked it up on google but couldn't find much to answer my question). Does this mean that it will perform more slowly on US networks?
Also a final question, if anyone is willing to answer it. What is the region-locking situation on this phone? I have read mixed reports about people being stuck with phones that they cannot use because it was not activated with a compatible SIM, and some people that say they have had no problem. I don't want to drop $900 on this device and not be able to use it.
Diraan said:
I thought I'd give this thread a small bump as I'm about to pull the trigger on an international N920I as well.
My question stems from simply being new to importing phones and having to pay attention to bands. I have bene following this thread closely, and it seems as though the N920I performs well on the AT&T network, but is it the same as if I had bought one from AT&T? I ask only because it was just mentioned that this phone does not have Carrier Aggregation.
I'm not certain what carrier aggregation is (I looked it up on google but couldn't find much to answer my question). Does this mean that it will perform more slowly on US networks?
Also a final question, if anyone is willing to answer it. What is the region-locking situation on this phone? I have read mixed reports about people being stuck with phones that they cannot use because it was not activated with a compatible SIM, and some people that say they have had no problem. I don't want to drop $900 on this device and not be able to use it.
Click to expand...
Click to collapse
My data speeds and reception have been the same as my nexus 6 and girlfriend's GS6 (purchased from AT&T.) Carrier aggregation allows for next generation LTE, but I have yet to own a phone, AT&T branded or otherwise, that supports it in my area. It might just be that there is no support for it in my city, but I'll be in Chicago In a few weeks and will try to investigate it there.
I can't speak to the region locking. All I know is my phone was completely sealed and worked 100% right out of the box with only putting in an AT&T SIM card.
alaskajoel said:
My data speeds and reception have been the same as my nexus 6 and girlfriend's GS6 (purchased from AT&T.) Carrier aggregation allows for next generation LTE, but I have yet to own a phone, AT&T branded or otherwise, that supports it in my area. It might just be that there is no support for it in my city, but I'll be in Chicago In a few weeks and will try to investigate it there.
I can't speak to the region locking. All I know is my phone was completely sealed and worked 100% right out of the box with only putting in an AT&T SIM card.
Click to expand...
Click to collapse
Thank you for the quick reply. I think I'll put in an order right now.
Samsung Pay
I'm glad to hear that the N920I works on AT&T on the LTE band. I considered getting the International version. However, there is something else that I am concerned about...and that is Samsung Pay that will be coming late September. I believe carriers have to allow (or configure) Samsung Pay to work. For example, Verizon may not be supporting it, at least that's what's traveling around the net. Also when I had the International Galaxy S3 on AT&T, Google Wallet didn't work, it only worked on AT&T versions at that time. Unfortunately, we won't know until Samsung Pay is available, but I wonder if it will work on the N920I?
Awesome news. can you please tell me if VOLTE works on AT&T or if you even had the option for HD calling? Settings should be found under data options.
Thanks in advance.
For those wondering, if you use an N920I on AT&T, there are a few things you should know.
1. Since this is an international model, the signal indicators are different than what we're used to seeing in the US. The SM-N920I shows the following indicators for mobile data:
E - This means you have a 2G/EDGE connection
3G - This means you have a UMTS connection with no HSPA
H+ - This means you have an HSPA+/Faux 4G connection
4G - This means you have an LTE connection
2. Phone calls will not work over LTE (VoLTE), and, by extension, HD Voice doesn't work either. The VoLTE and HD Voice components are proprietary software that is only built into the AT&T-specific ROM on the SM-N920A.
3. The phone DOES support carrier aggregation (otherwise known as LTE-Advanced), but not on AT&T's bands. Considering that the SM-N920I is intended for retail in Australia, New Zealand, and Singapore, the baseband firmware is tweaked to do carrier aggregation on band pairs that are common among carriers in that part of the world.
So, what does this all mean? If you want a phone that has support for all the bleeding-edge technologies on AT&T's network (VoLTE, HD Voice, LTE-A), then you have no other choice but to buy an AT&T-branded SM-N920A. However, if you want faster updates, no carrier bloat, no carrier branding, an unlockable bootloader, and don't mind sacrificing the whiz-bang stuff on the network side of things, then an SM-N920I will work just fine. Put your SIM card in, you'll get LTE data on all of AT&T's available bands, and you'll be able to make and receive calls over the HSPA+ network. You're just not going to have all the latest carrier-marketed bells and whistles that you'd get if you bought a proper AT&T-branded SM-N920A.
At this point, I *should* rant about how stupid it is that Samsung refuses to sell SIM-free, unlocked versions of their phones via US retail channels. That's what forces us to go through these 3rd party importers to get the international models that aren't really tweaked for the US carriers. Alas, I'm not going to go down that road, though. It's a tempest in a teapot.
oldblue910 said:
1. Since this is an international model, the signal indicators are different than what we're used to seeing in the US. The SM-N920I shows the following indicators for mobile data:
Click to expand...
Click to collapse
Translation: On the 920i/c, the signal indicators follow the international standard of "4G" being "LTE", and not the AT&T/TMO marketing fiction of "4G" being what everyone else calls "3.5G".
As for the rest of your points, I have to wonder how well deployed VoLTE is on AT&T (and I don't think AT&T has even started LTE-A yet, have they?)
I live in a somewhat rural area, and I'm just thrilled I have LTE.. which beats the "no signal" I get with other carriers. I don't know that I've ever experienced VoLTE. (Then again, I can't remember the last time I actually had a voice conversation with my phone.)
oldblue910 said:
At this point, I *should* rant about how stupid it is that Samsung refuses to sell SIM-free, unlocked versions of their phones via US retail channels. That's what forces us to go through these 3rd party importers to get the international models that aren't really tweaked for the US carriers. Alas, I'm not going to go down that road, though. It's a tempest in a teapot.
Click to expand...
Click to collapse
Oh, but why not?! We really need some more activity in the AT&T Note5 section.

LG G710EAW on T-Mobile. Crossflash?

Hello all!
I have an LG G7 from India, model G710EAW. I moved to the US from Canada and the phone isn't entertaining T-Mobile or ATT SIM cards. When I insert them, service works for a little bit and then immediately switches to "Emergency calls only". T-Mobile's website says my phone IMEI is compatible with its service.
The strange thing is that the phone has two SIMs from Canada roaming - one on the T-Mobile network and another on ATT. No issues whatsoever. And when I check the bands in Engineering Mode, I can see one roaming SIM running on LTE Band-4 on T-Mobile. The other roaming SIM is switching between LTE Band-2 and LTE Band-5 on ATT.
T-Mobile uses bands 2,4,5 mainly, and ATT uses 2,4,5 among other bands.This leads me to believe it's some kind of a network restriction preventing my phone from latching onto these networks directly.
I've made tons of calls to T-Mobile and ATT so I'm no longer interested in pursuing them with this.
I'm wondering if cross-flashing a different firmware might help fix this issue. I remember reading on this subreddit that the Google FI firmware may work for T-Mobile bands. I'm not sure I understood that correctly.
Can someone confirm if that's possible? Does this make sense? I'm hesitant to buy a new replacement phone when my G7 works so well.
Thanks!

Categories

Resources