Exactly what cellular radios does this phone [Telus TP2] have?
My carrier [Telus] has recently completed their 3G overlay, and I'm still showing "EV".
Should I be talking to them about fixing this, or...?
It was (is?) my understanding that this phone was fully 3G capable.
Can someone help me with this?
As far as I can tell, my phone should support the Telus overlay of HSPA on their CDMA network, however I'm showing "EV" an my network type on the notification bar.
I visited a Telus store, and talked to a rep, who just babbled to me about how my SIM was "registered" as a CDMA phone, and therefore I couldn't use HSPA.
>_>
Thoughts?
EDIT: The rep also fed me this convoluted bullsh*t about how when I'm roaming, I'll be able to be on HSPA networks, so I'll get better bandwidth roaming than on my home network...
Wow no one knows the answer to this?
I've searched, and there's no answer, per se, just descriptions of Telus' technology and the antennae in the TP2, which seems to indicate that the TP2 should be able to get on the Telus HSPA network...
I have a SIM-unlocked Telus Touch Pro2 I bought off Craigslist, figuring it'd be good to go when the HSPA network rolled out (Only four months later!). As I understand it, the telus model can make and receive calls on quad-band GSM frequencies, but only use EDGE speeds for data. Has to do with the firmware for the chipset inside the phone. The only HSPA 3G band the phone can use is 2100 Mhz, which is the bad used in Europe, not Canada. It's a major piss-off, especially when a month ago the stores made this out to be the top-of-the-line phone, perfect for ever and ever.
It would seem that should Telus decide to plug in some firmware upgrades, they could activate the new 3G bands, but why bother? We've already signed away our souls to the company.
Who knows, maybe they'll fix it when they release Windows 6.5 for our rig. Because that's on the top of the to-do list, right?
Well there are new radios that we could flash...would that change anything?
Now I may be misinformed but I think that the Telus version is a CMDA phone with GSM capabilites on some frequencies. I do not think it will work on HSPA in Canada as they use different frequencies (850 and 1900). This is why so many people were waiting for the ATT version to come out as it uses those frequencies.
Remember GSM does not equal 3G.
What I would like to know is whether the distinction between 3G and GSM is on the hardware side, firmware side, or software side. Telus would have you assume it's all the hardware's fault, but I'm not sure on that one.
From everything I have read its the chip in the phone that isnt programmed/capable of doing the frequencies required. It may actually be a second chip but I cant confirm that. Other posts have stated that there wont be a software fix to "unlock the frequencies" needed.
GSM is a cellular line and 3G is a data connection.
I just purchased an At&t Tilt 2 unlocked for use on Telus 3G+ network. The Telus Touch Pro 2 is a CDMA , Quadband GSRM and UMTS/HSDPA 2100. The Telus TP2 will only work with EVDO data on the Telus network. If you unlock it for use with Rogers it will work on GSRM with Edge data. That is why I have ordered the At&t Tilt 2. Unfortunately Telus won't honour my unlimited data plan and say it is only for EVDO and that I have to change to one of their current plans to have HSDPA. Like all of the networks, they get your money one way or the other. I'm pleased that with the Tilt 2 I am free to switch providers here in Canada and still get 3G as well as when I travel in Europe.
Related
I'm new here and I enjoyed this site very much. I have one problem with my TP2. Somehow, 3G network is not working after I installed Hard-SPL and unlocked T-Mobile TP2 switch to AT&T sim card. Everything is working fine with AT&T's sim card I was able to made phone calls, received, SMS, and web browsing. ATT 's 3G network is available around my home, but I can not get 3G on TP2 instead a EDGE network. Can unlocked TP2 handle AT&T's 3G network? or a .cab file I can download to fix this?
idk for sure but i think t mobile uses a different frequency for 3g from at&t so if they are you are stuck with edge speeds on at&t man sorry
I have the tmobile TP2 and i can confirm from talking with ATT that the phone does support ATT BUT i was unable to use the phone on 3g. The phone DOES support the signals for 3g but am still unable to access the towers in my area. I think the phone may be hard set to look at tmobile towers, is there any way i could reset the device to open up its tower usage? Hopefully i can get an answer but no tmobile TP2 users arent screwed in the US we just need to find a fix
It was my understanding that the tmobile tp2 does NOT have 850/1900mhz 3g on it. It does have aws 1700 for sure. Not sure about 2100mhz though for overseas.
This issue has been covered many times in the numerous AT&T threads on this board.
I'm sorry to tell you that the T-Mobile TP2 hardware radio was limited to using 3G over the 1700/900Hz frequencies, while AT&T currently uses 1900/850Hz only. It's unlikely that any change can be made to the radio software wise to fix this issue.
Just to make things clear the issue has nothing to do with Hard SPL or custom roms.
T-Mobile UMTS 1700/2100 Mhz
T-Mobile 3G runs on UMTS 1700 up and 2100 down. Unless you have a device that runs on those specific frequencies, EDGE is the best you can do with T-Mobile if you opt to run on their service.
ATT offers UMTS or 3G using 850mhz(the old TDMA band) and 1900mhz. While T-mobile offers HSDPA (technically 3.5g part of the UMTS specification) using 1700MHz for uplink and 2100MHz downlink.
Because HSDPA is part of the UMTS spec, it’s backward compatable. However, you have the limiting factor beging that the frequencies the individual carriers use to transmit the data.
Europe and Asia’s 3G runs on 1900/2100mhz. North and south America is supposed to use the (AWS) 3G spec using 1700/2100mhz
ATT didn’t want to wait, like T-mobile is doing, for homeland security to vacate those frequencies and launched on 850/1900mhz instead
ace.app said:
ATT didn’t want to wait, like T-mobile is doing, for homeland security to vacate those frequencies and launched on 850/1900mhz instead
Click to expand...
Click to collapse
I heard that t-mobile did not have enough spectrum in many areas to launch 3g in its existing 1900mhz. At&t doesn't have that issue, or as bad.
Im gonna make this real easy for u. The tmobile tp2 will not work on at&t 3g. The 3g bands are different
I bought HTC PRO2 (RHOD500) from Telus. I just noticed that it does not work on fido 3G network. GSM is fine.
If the Hard-SPL for world phone is released, can I use 3G fido network at that time?
Thanks
You can pay to get it sim unlocked now and it will work. Search for tmobile unlock on ebay. I am on Telus and it works perfect.
leanne said:
You can pay to get it sim unlocked now and it will work. Search for tmobile unlock on ebay. I am on Telus and it works perfect.
Click to expand...
Click to collapse
I knew that, and my phone has been unlocked. I can make phone call without any problem.
However, I can not use it with fido 3G network.
It does not work at all
Hey,
I don’t think its the phone . I have seen this issue many times in the past All your data settings are still set up for TELUS and the CDMA network, It’s not as simple as just unlocking the SIM card to get the data to work you have to go in an re-program the phone. I would suggest finding the Data setting on a Windows mobile device Fido has and just copying those into you Touch Pro 2. (you will most likely need to do this by hand)
Can’t promise it will work as I know some Carriers have certain fields added and removed to fit their needs which messes up the phone when you unlock it to use on other networks.
Wait!!
does this mean the RHOD500 has GSM and CDMA??
--- Does this mean?
1. Buy Telus TP2
2. Unlock
3. Switch to Fido/Rogers
4. Flash 6.1 GSM rom
5. Use 3g?
I think the issue here is that the Telus TP2 has had the 850/1900MHz UMTS bands disabled for some retarded reason. (Seems especially retarded seeing as how they are rolling out a UMTS network running on those bands in a couple of months).
There is speculation that the bands physically exist on the Telus TP2 but they have been software disabled. The other possibility is that the hardware is not physically present to utilize the 850/1900MHz bands that Fido/Rogers use for their 3G data and that the Telus TP2 will never work on their 3G networks (as well as its own upcoming one) but I think that would be a seriously regretful move on Telus' part.
The spec sheet for the MSM7600 indicates that the phone may or may not be capable of using the 850/1900MHz bands, but according to HTC and Telus' specifications it definitely is able to use the 2100MHz bands (which makes zero sense in Canada since nobody will be using those bands for a long time).
Rick#2 said:
I think the issue here is that the Telus TP2 has had the 850/1900MHz UMTS bands disabled for some retarded reason. (Seems especially retarded seeing as how they are rolling out a UMTS network running on those bands in a couple of months).
There is speculation that the bands physically exist on the Telus TP2 but they have been software disabled. The other possibility is that the hardware is not physically present to utilize the 850/1900MHz bands that Fido/Rogers use for their 3G data and that the Telus TP2 will never work on their 3G networks (as well as its own upcoming one) but I think that would be a seriously regretful move on Telus' part.
The spec sheet for the MSM7600 indicates that the phone may or may not be capable of using the 850/1900MHz bands, but according to HTC and Telus' specifications it definitely is able to use the 2100MHz bands (which makes zero sense in Canada since nobody will be using those bands for a long time).
Click to expand...
Click to collapse
This isn't extremely helpful, but
http://web.archive.org/web/20071025232258/www.cdmatech.com/download_library/pdf/msm7600_chipset.pdf
according to that (if I'm reading right) there has to be at least 1 other UMTS band, no configuration is ONLY 2100MHz (the chipset that does only that doesnt do the 1900MHz PCS band for CDMA). But really, I'm pretty much guessing.
Hi I am using the unlocked Telus version on Fido. It's true that you can't use 3G because the phone does not support the required bands. But I still use EDGE. It's slower but better than nothing. Create a new connection and name it Fido. APN is : internet.fido.ca
Username: fido
PW: fido
Hope this helps.
https://www.telusmobility.com/en/QC/htc_touchpro2_t7379/index.shtml
Go to this site, click on the Details button and you'll see that the TP2 supports all of the above mentioned Bands. The bands are all software locked and once Telus initializes the new network (along with WinMo 6.5) they will offer the firmware upgrade to open ALL the GSM bands. It'll just be the question of unlocking the simlock on the device!
wraith79 said:
https://www.telusmobility.com/en/QC/htc_touchpro2_t7379/index.shtml
Go to this site, click on the Details button and you'll see that the TP2 supports all of the above mentioned Bands. The bands are all software locked and once Telus initializes the new network (along with WinMo 6.5) they will offer the firmware upgrade to open ALL the GSM bands. It'll just be the question of unlocking the simlock on the device!
Click to expand...
Click to collapse
I think that maybe you are confusing GSM bands with the UMTS/HSPA bands.
There's a big difference between the GSM/Edge bands and WCDMA/UMTS.
I have been following the subject and there`s no concrete evidence that the 850/1900 WCDMA/UMTS bands are only software.
Where the hell did you get your firmware upgrade information? I've only seen this info given as pure speculation!
If the TouchPro 1 is any indication, the phone might be missing some key components to make it work. In the case of the TP1 it was the amplifier that was missing so it couldn't work even chipset and everything could support it.
(see: http://forum.xda-developers.com/showthread.php?t=420865&page=40)
So while it's possible, until someone does a teardown of the phone and we see all the required component it's simply not possible to say that 3G on a GSM network is possible.
The ONLY indication I have seen that it might support 850/1900 HSPA network is the fact that telus stated that the Tour and Storm will not work on the HSPA network. They failed to mention the TP2 so maybe we can read between the lines:
http://mobilesyrup.com/2009/08/16/t...be-compatible-with-the-canadian-hspa-network/
Axeslocked said:
Wait!!
does this mean the RHOD500 has GSM and CDMA??
--- Does this mean?
1. Buy Telus TP2
2. Unlock
3. Switch to Fido/Rogers
4. Flash 6.1 GSM rom
5. Use 3g?
Click to expand...
Click to collapse
Oh and please never flash a GSM rom on a CDMA / World phone!
labbbby said:
Oh and please never flash a GSM rom on a CDMA / World phone!
Click to expand...
Click to collapse
lol.. I second that
UMTS Bands
labbbby said:
I think that maybe you are confusing GSM bands with the UMTS/HSPA bands.
There's a big difference between the GSM/Edge bands and WCDMA/UMTS.
I have been following the subject and there`s no concrete evidence that the 850/1900 WCDMA/UMTS bands are only software.
Where the hell did you get your firmware upgrade information? I've only seen this info given as pure speculation!
If the TouchPro 1 is any indication, the phone might be missing some key components to make it work. In the case of the TP1 it was the amplifier that was missing so it couldn't work even chipset and everything could support it.
(see: http://forum.xda-developers.com/showthread.php?t=420865&page=40)
So while it's possible, until someone does a teardown of the phone and we see all the required component it's simply not possible to say that 3G on a GSM network is possible.
The ONLY indication I have seen that it might support 850/1900 HSPA network is the fact that telus stated that the Tour and Storm will not work on the HSPA network. They failed to mention the TP2 so maybe we can read between the lines:
http://mobilesyrup.com/2009/08/16/t...be-compatible-with-the-canadian-hspa-network/
Click to expand...
Click to collapse
I have been following this debate on multiple forums.
Based on some information from RileyFreeman, I do think Telus will enable the TouchPro2 for new HSPA network.
Granted, today, you can unlock and use on Rogers, Fido or ATT networks using EDGE, it would be a real poor move for Telus to not have an upgrade path to HSPA.
This is Telus's non Blackberry flagship business device, today, Telus has Enterprise customers testing the HSPA network (likely either PC cards or USB modems). Once HTC releases Windows Mobile 6.5, this would be an ideal time to upgrade the radio's and unlock the 850/1900 UMTS bands.
I can see the 850/1900 bands today, not 100% if they are actually there, also wondering if Telus is also waiting for ATT to release TP2 so ATT can test ROM, Sprint nor Verizon would not have any need to do any regression testing on ROM that supports UMTS bands. Tell tale sign will be if ATT TP2 has same chipset as Telus TP2.
I am crossing my fingers that TP2 will support Telus Canadian SIM.
I agree with you points. By seing the bands you mean in windows mobile band selction settings? If so these are always there.
I highly doubt ATT will use the same chipset as Telus since they use the MSM7600 to support both GSM and CDMA. ATT as no need for CDMA.
Also to support my claim:
ATT is RHOD300 device.
I think Telus is RHOD500 and Sprint is RHOD400 (can't find this info but I know 400/500 are both world phone, so it might be the opposit or something)
Different RHODXXX indicates differents innards.
Bottom line I want a TP2 with 3G on Fido so Im crossing my finders too!
Edit:
http://www.engadget.com/2009/06/04/atandts-htc-touch-pro2-hits-the-fcc/
So that's Rhodium 100 for T-Mobile, 400/500 for Sprint and Verizon (or vice-versa) and 300 for AT&T
Noob mistake on my part I think the Rhodium XXX is FCC ...so why did I think Telus was in there =\
Sprint is RHOD400, Verizon and Telus both are RHOD500.
I'm a little green when it comes to 3G stuff, but please correct me if I am wrong...
Yes, you can put foreign SIM cards in US TP2's but not get 3G coverage in Europe. On the other hand from what I have read, European TP2's (even the unbranded ones) will not work with 3G is the US.
And if I am wrong... can someone please point me to a TP2 that will work on 3G networks in most of the world?
Or does one have to have two TP2's to enjoy 3G.. one for the US, and one for Europe, etc.?
quid246 said:
I'm a little green when it comes to 3G stuff, but please correct me if I am wrong...
Yes, you can put foreign SIM cards in US TP2's but not get 3G coverage in Europe. On the other hand from what I have read, European TP2's (even the unbranded ones) will not work with 3G is the US.
And if I am wrong... can someone please point me to a TP2 that will work on 3G networks in most of the world?
Or does one have to have two TP2's to enjoy 3G.. one for the US, and one for Europe, etc.?
Click to expand...
Click to collapse
Where have you heard that a NA TP2 won't work with 3G in EU?
The only limitation I'm aware of is a NA TP2 won't work w/ NA GSM 3G.
Oh SoS said:
Where have you heard that a NA TP2 won't work with 3G in EU?
The only limitation I'm aware of is a NA TP2 won't work w/ NA GSM 3G.
Click to expand...
Click to collapse
Until someone hacks it
I can't remember where I read it. But someone said if you wanted 3G in Europe, better to get a Euro unbranded model.
So perhaps this is under the assumption that it isn't hacked... not sure.
Slightly, off-topic Q but rather than start a new thread.... once a HardSPL is out for both the CDMA and GSM TP2's... will they effectively be "equal" devoces?
I really would like to pick-up a TP2 in the next few days... I like the VZ unit, but it's CDMA and since I travel quite a bit, really prefer and need more of a GSM phone, but don't like the TMO as no 3.5mm jack.
quid246 said:
I can't remember where I read it. But someone said if you wanted 3G in Europe, better to get a Euro unbranded model.
So perhaps this is under the assumption that it isn't hacked... not sure.
Slightly, off-topic Q but rather than start a new thread.... once a HardSPL is out for both the CDMA and GSM TP2's... will they effectively be "equal" devoces?
I really would like to pick-up a TP2 in the next few days... I like the VZ unit, but it's CDMA and since I travel quite a bit, really prefer and need more of a GSM phone, but don't like the TMO as no 3.5mm jack.
Click to expand...
Click to collapse
The Verizon unit already has international GSM bands unlocked, AND international (2100MHz 3G). If you've been a Verizon customer for 60 days or more you can call them up and get an unlock code for free and use any SIM card in your phone so you can get a cheap prepaid SIM and not pay the high Verizon roaming costs. There's also a small (I'd say around 25%) chance that the NA 3G bands will be found/unlocked, but at this point who really knows if they are there or not.
Actually the Telus CDMA TP2 supports the European 3G bands but not the American ones becuase technically you will be using it in North America on CDMA and outside America on GSM. So its the other way around
It seems that if you have the Sprint TP2 that it won't register at all on US GSM networks, but comes unlocked by default.
On Verizon (which I have) a simple phone call to support they'll give you the unlock code and you're good to go. I use an Orange (UK) Sim in mine just fine in the US and others in other forums have reported that using US SIM's from TMobile/AT&T work fine also in the US.
--chris
TP2 = best 'World' phone I've ever owned.
quid246 said:
I'm a little green when it comes to 3G stuff, but please correct me if I am wrong...
Yes, you can put foreign SIM cards in US TP2's but not get 3G coverage in Europe. On the other hand from what I have read, European TP2's (even the unbranded ones) will not work with 3G is the US.
And if I am wrong... can someone please point me to a TP2 that will work on 3G networks in most of the world?
Or does one have to have two TP2's to enjoy 3G.. one for the US, and one for Europe, etc.?
Click to expand...
Click to collapse
I have an unbranded HTC factory TP2, and it works in 3G mode anywhere I take it that has the 3G network... and I travel all over the US/Caribbean and back to EU/UK. Have not found one spot it hasn't worked (inlcduing some of the very obscure Carib countries), and I like the fact that it automatically picks up HS when within range without having to change any settings.
Just have to make sure that your provider gives you a 3G SIM (most of them are these days) and that you have the 3G service enabled on your account in the respective country.
Many people say they can't pick it up yet don't have it on their account, or think that their EU provider will automatically provide it as part of the roaming service... which is not a good assumption to make.
TyTanIc said:
I have an unbranded HTC factory TP2, and it works in 3G mode anywhere I take it that has the 3G network... and I travel all over the US/Caribbean and back to EU/UK. Have not found one spot it hasn't worked (inlcduing some of the very obscure Carib countries), and I like the fact that it automatically picks up HS when within range without having to change any settings.
.
Click to expand...
Click to collapse
3G in North America? I doubt that. The phone does not support North American 3G bands. Are you sure it was 3G in North America??
Man, this is all confusing... I swear somebody has to come up with an HTML table of what phones work with what and where and stickify it.
Can people just put this to bed already!!!
The Sprint (North America) TP2 is suppossed to be used on CDMA in the US and GSM worldwide, hence the GSM radio is unlocked for outside America GSM use. This is how it comes default. If that is so hard to grasp, then there is no hope for some, sadly.
As for the title, the TP2 is a world phone, it works in the US (and North Ameria) on CDMA and elsewhere unlocked on GSM. That to me is the true definition of a World phone from a U.S CDMA perspective (and especially moreso as this is the CDMA version).
To put it in perspective, a Sprint customer (in this case, moi) gets the best of CDMA in the U.S and when traveling to visit his sister in High Wycombe in the U.K (like i'll be doing this Autumm) gets to pop in a PAYG U.K sim in the same phone and use it while over there. This phone doesn't get any "worldlier" to me than this scenario!!
Is the O.P attempting to specifically define a dual mode CDMA/GSM-unlocked World phone as not world phone because it's locked by default from doing GSM in it's primary market which happens to be CDMA (and in this case Sprint)?
This is not rocket science folks, it really isn't.
LordLugard said:
Is the O.P attempting to specifically define a dual mode CDMA/GSM-unlocked World phone as not world phone because it's locked by default from doing GSM in it's primary market which happens to be CDMA (and in this case Sprint)?
Click to expand...
Click to collapse
Point taken. It's just that with that same Sprint phone (correct me if I am wrong), you can't travel to Canada pop in a Rogers SIM card and get Rogers 3G.
Wouldn't the phone want to swing towards it's CDMA cousin, Telus or Bell?
mmmhhh86 said:
3G in North America? I doubt that. The phone does not support North American 3G bands. Are you sure it was 3G in North America??
Click to expand...
Click to collapse
AT&T 3G runs on 850/1900 GSM, the TP2 supports both of those bands, how would it not work with 3G on AT&T in the US?
T-Mobile runs 3G on 1700/2100 GSM bands, both of which aren't included on the TP2, as far as my research has lead me to believe.
Basically while it may be a quad band GSM phone, it is only a dual band 3G device. It comes in two flavours - UMTS 900+2100 or UMTS 1900+850
The 900/2100 version is far more common than 850/1900
.mak said:
AT&T 3G runs on 850/1900 GSM, the TP2 supports both of those bands, how would it not work with 3G on AT&T in the US?
T-Mobile runs 3G on 1700/2100 GSM bands, both of which aren't included on the TP2, as far as my research has lead me to believe.
Click to expand...
Click to collapse
It supports those bands for HSDPA CDMA not GSM 3G
Network 3G EVDO Rev A (800/1900 MHz), UMTS/HSPA (2100 MHz), GSM/ EDGE (850/900/1800/1900 MHz)
This is the Telus version btw
quid246 said:
Point taken. It's just that with that same Sprint phone (correct me if I am wrong), you can't travel to Canada pop in a Rogers SIM card and get Rogers 3G.
Wouldn't the phone want to swing towards it's CDMA cousin, Telus or Bell?
Click to expand...
Click to collapse
"it Depends"
The US CDMA phone operates in 3 modes.
1 CDMA Only
2 GSM Only
3 'Global' (whatever it can find).
If you have it in Global it will generally take the CDMA local carrier over anything else. However, not always. I've had mine switch to GSM for a bit then go back to CDMA. But mine is Verizon and unlocked so it works everywhere in the US and I also have a UK sim card in it. So I'm a little 'different'.
But, in any case, you can tell the phone which mode to use if you want. All upto you.
--chris
(verizon TP2)
here we go again... (tp2 3g na)
"I have an unbranded HTC factory TP2, and it works in 3G mode anywhere I take it that has the 3G network... and I travel all over the US/Caribbean and back to EU/UK. Have not found one spot it hasn't worked (inlcduing some of the very obscure Carib countries), and I like the fact that it automatically picks up HS when within range without having to change any settings."
So, maybe he's wrong. But either way...
You wanna know why this keeps coming up again and again?
(not because we're all dumb and thick headed, which we may very well be)
But,
Because we just have trouble imagining them hardware "band amplifier" hobbling the hardware when it's so much easier to do it somewhere in firmware.
We all know that the less you fiddle with the hardware for multi-region functionality the less you have to fiddle with the production line and fiddling with the production line is the Last Thing a manufacturer wants to do.
Someone even once said that there wasn't room in the Rhodium platform for quad band data support. But now we're expecting the tilt 2 to do just that.
So, all protestations aside, those of us who paid ~700 us clams for this beauty, and who like the kbd layout.
And who have like me (as quite the Early Adopter), forked out for an sx56, sx66, 8135, x7510((quad band data)
Just feel a leetle wee bit of a sense, dare I say it, of Entitlement for the TP2 to be enabled into a fully world wide phone.
So we keep hunting, and digging, and dreaming, and .... posting.....
well here is my two cents i have the original unlocked euro version of the tp2 and all i get in the us it edge. it is really impossible to get 3g in the US (2100) because this version of the phone literally does not have the attena for it. and so that you can see all the different types of tp2s and the technical and physical differences between them here is a link: http://pdadb.net/index.php?m=pdacom...&id3=1792&id4=1829&id5=1766&id6=1989&id7=1751
drae1980 said:
well here is my two cents i have the original unlocked euro version of the tp2 and all i get in the us it edge. it is really impossible to get 3g in the US (2100) because this version of the phone literally does not have the attena for it. and so that you can see all the different types of tp2s and the technical and physical differences between them here is a link: http://pdadb.net/index.php?m=pdacom...&id3=1792&id4=1829&id5=1766&id6=1989&id7=1751
Click to expand...
Click to collapse
3g in the USA must be on the 1700 band then, as thats the only gsm band that the euro version doesn't support.
Euro version
GSM850, GSM900, GSM1800, GSM1900, UMTS900, UMTS2100
TMOUS version
GSM850, GSM900, GSM1800, GSM1900, UMTS1700, UMTS2100
Anyone know of a good site to order a prepaid SIM card? I plan on using my VZW TP2 in Spain and France. I was also wondering if I should or could disable data and use my TP2 with Garmin XT so I don't get nailed for data usage. Your thoughts would be appreciated...
Mugs
I have an HTC TouchPro 2 that I bought from T-Mobile here in the US. While I now have an account with T-Mobile, I was able to get this with no contractual committment. I also happen to have an AT&T Fuze with an account at AT&T. Originally, I wanted to move my cell service to T-Mobile, as I can get the same service for about $30-$40 less per month from T-Mobile than I pay AT&T. However, I have discovered that T-Mobile does not have nearly the data network speed that AT&T does. I can get 3G from T-Mobile, but not nearly as widely as I can with my AT&T phone and service. Consequently, I would like to convert the phone to AT&T. I have unlocked the phone, and upon moving the SIM card from the Fuze to the TP2 I can make AT&T calls with my AT&T number, but moving the SIM card doesn't get me connected to the AT&T data network. I finally figured out how to connect, but I can't get 3G to work.
Does anyone know how to solve this problem?
AT&T and T-Mobile use different 3G frequencies. So your T-Mobile TP2 is not compatible with AT&T 3g frequencies. The best you will get with your AT&T sim in there is EDGE.
Same problem in Oz...
Telstra uses Next-g network - 850Mhz...
Everyone else uses 3G - 900Mhz...
We have the Touchpro 2 Model 7373 (3G) and the 7381 (Next-G)...
Telstra sim in a 7373 variant means edge service but another carrier uses 3G.
Vice Versa in a 7381 model...
Bloody annoying... Should use ALL frequencies, that would be easier, especially as it say 850 - 1800 Mhz on the band page...
Oh, well....
Not exactly what I had hoped to hear. Thanks for the answer. I guess my next step should be to see if there is any hope for T-Mobile to improve their data coverage.
Looked everywhere but have only found a few comments mainly regarding the AT&T network.
I have a AT&T branded Tilt-2 with TP2_Core_Cell_Evo_V3.1_(23127) and am on the T-mobile network.
In my area we have HSDPA and 3G, and my HTC 3G Dash shows those connections and runs from 583K up to 898K.
My Tilt2 on the other hand runs between 36K and a max of 156K (usually its under 50K)
I have tried everything and a ton of different radios and nothing seems to help.
I can't believe I am the only one, and I am sure its in the forum but I havent been able to find it and I have been looking for 2 days now. Does ANYONE know if there is a solution to this or am I stuck with a great looking phone and ROM that is slower than my old HTC Universal.
So I am starting this thread with the keywords in the title to help others find the info/help/cab/settings to fix this issue.
Any help would be appreciated..
Charles
Can I assume from the deafening silence that there is no solution and this would be why I couldn't find anything when I was searching all over the forums.
I thought AT&T and T-mobile use different bands for their 3G...haven't met anyone yet that can switch between these two and get the others' 3G service to work on the phone from the other...only Edge.
Yep, 3G are are different bands and AT&T's unique.
Most likely, hardware limit and T-Mobile Touch Pro 2 version is what you wanted.
However, for my Tilt 2, I use AT&T Prepaid Pay-as-you-go and get full 3G service and for $20 get 30 days of 100MB data at full speed. The Pay-as-you-go offers a $3.00 per day for unlimited calls during 24 hour period when you choose plan.
But the settings on the phone even show the 2100MHZ band and other stuff.. thought quad band phones were useable on all GSM networks. I guess that must mean the phones are but not the data portion of the phone.
So it would seem I have a really nice looking phone thats about as functional as a Windows 7 computer with a 56K dialup modem. Great...
Anyone on AT&T and have a T-mobile Touch Pro2 that they would like to swap with me.
when you talk about gsm (gprs/edge/2g), there are 4 bands and pretty much all devices can work on those. when it comes to umts (3g/hspa encap) thats where proprietary bands come in. word wide you will have the 900 and 2100 bands, att uses the 850 and 1900 bands, and tmobile uses 1700. what bands a phone is capable of running on depends on the baseband hardware in the phone. theres no way to change this without basically swapping the phone out for the carrier branded device.
cdma like sprint and verizon is another monster...
cdgoin said:
thought quad band phones were useable on all GSM networks.
Click to expand...
Click to collapse
They do, but working and working optimally are 2 different things. You should always buy a phone to work on the network you use regularly, and be happy it works at all on others when you travel.
Live and learn..
I wonder if anyone out there in the community has a TouchPro2 that they got for use on AT&T and would like to swap..?
Charles
Can't get 3G Either
I'm using an unlocked HTC Touch Pro 2 (Euro Version) on T-Mobile and can only get Edge. The funny hting is that T-mobile is stumped on the issue even though they've seen that I'm using an HTC Touch Pro 2, not the branded T-Mo version. I just started looking into hardware differences tonight and will post whatever I find. I'm glad you started the thread.
T-Mobile HSPA bands
Just confirmed my suspicions.
The branded T-Mobile Touch Pro 2 operates on HSPA/WCDMA on the following bands: 1700/2100 MHz.
The HTC Touch Pro 2 (unbranded) operates on HSPA/WCDMA: 900/2100 MHz.
So, if you want 3G, you need to stick with the T-Mobile branded phone.
Wow...I never thought I'd hear myself saying those words. *sigh* =(
I actually have a t-mobile branded HTC Touch Pro 2 I use on ATT, if you really wanna swap I'm totally down for that. My email is [email protected] shoot me a message and lets work out how to go about this.