After the android 10 ota update, i can't open android auto on my pixel. it shows in my apps but there is no icon installed on my phone(I am not rooted).
Any work around solution?
You'll find it under Settings, Google, Android Auto
If you're coming from a fresh 10 install, set it to auto start when connecting to a bluetooth device - either via what bullfinch110 said or go to Nova Launcher and create a shortcut to Android Auto Settings. But it has to be connected to that Bluetooth device otherwise it won't run. Otherwise take OTAs from Pie and it will remain as a launchable app.
So I had a issue with Android Auto on Android 10... My vehicle has the head unit JVC KW-M845BW and I couldn't get the android auto interface to pop up after installing Android 10. In Pie, I could just go into the app and turn on the bluetooth auto start up setting when the car started. Now that the app is not available to open, you have to hope starting the head unit will pull up Android Auto... In my car, I have to set the parking break to get Android auto app to pop up on Android 10 for the first time installation. After that, the app pops up on my head unit every time.
I've come across the same issue today - relocked my bootloader and on reboot and setup I can't locate the app. Play store says it's installed but it's not listed as installed on the phone. Sideloading the APK doesn't change this. I'm not using an AAuto headunit, gut using the phone as the display for my BT headunit.
Have force stopped the launcher, flashed the latest image, rooted, unrooted... I'm about to move to a Pie rom to see if it carries on
Someone has managed to use android auto on a Toyota C-hr?
Android Auto is now an integrated app in Android 10. You can trigger it either with a Tasker task or when connecting to a bluetooth device:
Go to settings > apps > android auto > additional settings > autolaunch with bluetooth, and set the app to autolaunch whenever it connects to your car's bluetooth.
Same issue here, but there is no "Autolaunch" option in settings for Android Auto version 5.0.500214. Any idea?
Trottel said:
Same issue here, but there is no "Autolaunch" option in settings for Android Auto version 5.0.500214. Any idea?
Click to expand...
Click to collapse
My phone is on 4.9.594934 and it still has autolaunch. Playstore doesn't show a new DL for the app. I would uninstall the version and install an early version.
jlokos said:
My phone is on 4.9.594934 and it still has autolaunch. Playstore doesn't show a new DL for the app. I would uninstall the version and install an early version.
Click to expand...
Click to collapse
Even in 4.9.594934 I have no autolaunch option
Trottel said:
Even in 4.9.594934 I have no autolaunch option
Click to expand...
Click to collapse
Do you have the AA app on the phone? If not try this, go into settings>apps & notifications>AA>advanced>additional settings in the app; this will open up AA settings. Go o phone screen settings>autolaunch.
jlokos said:
Do you have the AA app on the phone? If not try this, go into settings>apps & notifications>AA>advanced>additional settings in the app; this will open up AA settings. Go o phone screen settings>autolaunch.
Click to expand...
Click to collapse
It looks like AA is installed, but in the Settings>Apps & Notifications I can only deactivate the application or uninstall updates. I assume this is because AA is preinstalled on Nokia 7 plus with A10. However, I do not see the icon in the installed applications. There isn't even a choice of Phone screen settings in Additional Settings in the App. Is it possible that this is due to the fact that AA is not officially supported in the Czech Republic?
Sorry, Android auto for phone screens solved it.
Related
Don't know if everyone knows this. Cisco Anyconnect app is available in the Android market. You will find two different versions, one that says is for Samsung devices and the other says it is for rooted devices (no mention of brand).
I downloaded the one for rooted devices, installed correctly, and after complaining that the tun.k module was not found, I loaded it in the kernel and the app is working just fine.
tip: If you're on a kernel that has tun support just open a terminal and type:
su
modprobe tun
profit (no I'm kidding, don't type that
that's it.
My phone is running non-stock (Darky 9.5, Dark Core 2.4), i9000T from Mexico.
EDIT: Cisco...phew....they think they're the center of the universe. The VPN app places an icon up in the notification area and it stays there even when you're not using the VPN connection. Sometimes those guys can be so annoying.
Control notifications
Hello,
Thank you for the information, I searched a while ago and am happy to see that they released it after all
But this notification thing is so annoying that I download it to use it when I really need it and then uninstall it... Kind of a p*** in the a**...
SO, I was wondering, does anyone knows a way to disable notifications for a specific application ?
Or an app that would manage that, maybe an app that would control the permissions given to the applications (if the ability to display notifications needs a specific permission..) ?
Thank you
Yeah, it's a royal pain in the butt. Simple way to get rid of it is just force close the app. Go to settings-> Applications -> Downloaded and look for Anyconnect there and force close. When you need it again just run it as a normal app.
I keep it on my tablet but tbh uninstalled it from my phone.
That app still on?
I am using a galaxy s6 and whenever I click to open Maps on my watch, I get a notice that says "Update Android Wear- Maps won't run unless you update Android Wear app". I've tried to remove and reinstall it on my phone, but keep getting the same error. I've also tried to reset my watch to factory default. Neither fix the problem. Has anyone else seen this? BTW- I also have problems opening keep.
hoops129 said:
I am using a galaxy s6 and whenever I click to open Maps on my watch, I get a notice that says "Update Android Wear- Maps won't run unless you update Android Wear app". I've tried to remove and reinstall it on my phone, but keep getting the same error. I've also tried to reset my watch to factory default. Neither fix the problem. Has anyone else seen this? BTW- I also have problems opening keep.
Click to expand...
Click to collapse
On your watch go to Settings > About > Versions and what versions of Google Play Services and Android does it show? Also what build number are you running?
I suspect Google Play Services isn't updating correctly on the watch when installing the Android Wear app on your phone.
xdatastic said:
On your watch go to Settings > About > Versions and what versions of Google Play Services and Android does it show? Also what build number are you running?
I suspect Google Play Services isn't updating correctly on the watch when installing the Android Wear app on your phone.
Click to expand...
Click to collapse
Android Wear is 1.3.0.2230669
Google play is 8.1.07
Build number is LLA44S
hoops129 said:
Android Wear is 1.3.0.2230669
Google play is 8.1.07
Build number is LLA44S
Click to expand...
Click to collapse
my google play services is 8.3.01 and everything else is the same
Same issue - did you figure it out?
hoops129 said:
Android Wear is 1.3.0.2230669
Google play is 8.1.07
Build number is LLA44S
Click to expand...
Click to collapse
Same issue here... my versions:
Google play is 7.8.99
Android wear is 1.3.0.2160025
Build LCA43
I am also having this issue. Just bought a moto 360 gen 2 for my s6 and maps on my wrist was a main selling point. I hope there's a fix.
gigamchz said:
I am also having this issue. Just bought a moto 360 gen 2 for my s6 and maps on my wrist was a main selling point. I hope there's a fix.
Click to expand...
Click to collapse
Best ask in the Gen 2 forum...this one is for the Gen 1.
http://forum.xda-developers.com/moto-360-2015
I had this problem as well, at least for me, maps wouldn't start using "ok Google" or the Google search app, so I started the maps app manually on the watch using the app list menu (took a while to scroll to "m"), started navigation, and after that point "ok Google, navigate ..." started working, I have a galaxy s5 and a moto 360 2nd gen.
Same message, whether I do "where is London" from ok Google, or trying to open the Maps app manually.
Android Wear 1.3.0.2166028
Google Play Services 7.8.99 (2134222-534)
Android OS 5.1.1.
Motorla Moto 360 Update Android Wear
Hello my friends
I need help,I have a moto 360 when the update go to this show:[PUBLIC] Full OTA to LCA44B
But the build number is:KNX01S
What do I do that updated
Help me please
I had a profile triggered by %UIMODE when I connected to Android Auto. It was working fine on my S21 Ultra but it doesn't seem to work on the 6 Pro. Is it a Pixel, Android 12, or me issue?
I have the same problem... Google Pixel 6
RockManX77777 said:
I had a profile triggered by %UIMODE when I connected to Android Auto. It was working fine on my S21 Ultra but it doesn't seem to work on the 6 Pro. Is it a Pixel, Android 12, or me issue?
Click to expand...
Click to collapse
I have a Pixel 5 and it happened after the Android 12 upgrade, so it's probably that. I couldn't find a way to report a bug, tried the Google group but don't have permission to post.
I had the same issue. Been using uimode for my tasker profile forever. This obviously no longer works in Android 12. But after spending a bit of time, I found a workaround! Not pretty, and it requires a third party app, but hey it works. I have always had a start and exit task. When Android Auto runs, Bluetooth, location, etc enable. When I unplug, all of those things turn off. Of course, the trigger for this profile was uimode=car. Anyways, I was able to change the trigger to use autonotification instead. This tool must be purchased. It's from the autoapps developer. Replaced my trigger with a State (do not use Event, even if the app tells you otherwise) --> Plugins --> Autonotification --> Intercept. Then hit the configuration button. Scroll down to Apps. Then choose Android Auto. That's it. Works like a charm. I originally had the notification text in there, but changed to the app only. Important: the reason to use a State rather than an Event is due to the fact that tasker cannot have an exit task with an Event.
contact the author of Tasker... pretty responsive to fixes
Here's a workaround that works until João Dias fixes it for Android 12 in his next release of Tasker Beta
Simple profile to react to notification from Android Auto connecting.
Tasker Share
taskernet.com
My Google Assistant suddenly stopped working. Whenever I tried to issue a command, it returns "Cannot reach Google at the moment.".
Tried in my old phone, there are no problems.
Tried restarting but the problem still persists.
Anyone experienced this? Any solution?
HI YOU HAVE MANY WAYS TO FIX THAT
1-TRY FORCE CLOSE GOOGLE ASSISTANCE AND CLEAR ALL DATA AND CACHE .
2-IF YOU ARE USING A DATA PACKAGE ,USE A VPN
IF THOSE METHODS DON'T WORK UNINSTALL APP AND REINSTALL IT
Thiviru Gunarathna said:
HI YOU HAVE MANY WAYS TO FIX THAT
1-TRY FORCE CLOSE GOOGLE ASSISTANCE AND CLEAR ALL DATA AND CACHE .
2-IF YOU ARE USING A DATA PACKAGE ,USE A VPN
IF THOSE METHODS DON'T WORK UNINSTALL APP AND REINSTALL IT
Click to expand...
Click to collapse
dont need to shout.
The problem is nomally related to internet not working, be it service, or vpn stalled
Thiviru Gunarathna said:
HI YOU HAVE MANY WAYS TO FIX THAT
1-TRY FORCE CLOSE GOOGLE ASSISTANCE AND CLEAR ALL DATA AND CACHE .
2-IF YOU ARE USING A DATA PACKAGE ,USE A VPN
IF THOSE METHODS DON'T WORK UNINSTALL APP AND REINSTALL IT
Click to expand...
Click to collapse
Tried, didn't work.
Same here, brand new Pixel 6. Go into Assistant settings, scroll all the way down to "Your Apps (manage how Assistant works with installed apps)." Click on the Chrome browser and make sure "let your assistant choose this browser" is checked on. THEN, in the same settings, go to whatever other browsers you have installed and UNCHECK those.
Apparently Assistant got confused by too many options. (it might work if you check another browser and uncheck Chrome, but I quit playing with it once it was working again.)
Sea21 said:
Same here, brand new Pixel 6. Go into Assistant settings, scroll all the way down to "Your Apps (manage how Assistant works with installed apps)." Click on the Chrome browser and make sure "let your assistant choose this browser" is checked on. THEN, in the same settings, go to whatever other browsers you have installed and UNCHECK those.
Apparently Assistant got confused by too many options. (it might work if you check another browser and uncheck Chrome, but I quit playing with it once it was working again.)
Click to expand...
Click to collapse
Did this one but didn't work. Also, I only have Chrome as browser so I guess this isn't the problem.
Thiviru Gunarathna said:
HI YOU HAVE MANY WAYS TO FIX THAT
1-TRY FORCE CLOSE GOOGLE ASSISTANCE AND CLEAR ALL DATA AND CACHE .
2-IF YOU ARE USING A DATA PACKAGE ,USE A VPN
IF THOSE METHODS DON'T WORK UNINSTALL APP AND REINSTALL IT
Click to expand...
Click to collapse
Tried uninstalling, rebooting and re-updating the Google app. The Assistant is working again but Continued Conversations doesn't work. There were also times after I did this, the problem returned.
I had the same problem yesterday and fixed it by doing the following:
Google app->settings->Google Assistant->Assistant Voice-> and switch Phone to full.
I also purchased universal safetynet fix 2.2 and now pass Safetynet. Did both in conjunction with each other so that combo should work if you are rooted with the correct Magisk Canary.
Starzboy77 said:
I had the same problem yesterday and fixed it by doing the following:
Google app->settings->Google Assistant->Assistant Voice-> and switch Phone to full.
I also purchased universal safetynet fix 2.2 and now pass Safetynet. Did both in conjunction with each other so that combo should work if you are rooted with the correct Magisk Canary.
Click to expand...
Click to collapse
Not rooted and already set to Full, Continued Conversations still doesn't work.
danw_oz said:
dont need to shout.
The problem is nomally related to internet not working, be it service, or vpn stalled
Click to expand...
Click to collapse
ok i forgot to off capital letteres
I have struggled with this recently. Here's what worked for me. I noticed that on cellular it worked, but on my WiFi it did not although it had in the past. The trick was to go into WiFi settings and tell it not to randomly change the Mac address (use Device MAC). I suppose that -- maybe only with some routers -- the changing MAC is upsetting the NAT translation and your phone is making an outbound connection but that's just a theory.
I had the same problem, had used adaway and blocked some dns requests, cleared these and Hey Google worked again. Cheers.
Usually, the only times I have trouble with the Assistant this way are when I get in my car, hook it up for Android Auto, and in my driveway, I'm kinda in range of my Wi-Fi but not very well. It doesn't usually take very long for my phone to switch to mobile data on its own in this situation (and it took my Samsung way longer), but once it establishes a reliable connection via mobile data, then it's fine.
Necro'd thread to post POSSIBLE FIX:
Go into Developer options and disable 'App Wi-Fi Multi/Broadcasting Filter'. I'd turned it on randomly and forgotten, and have been suffering ever since. Turning it back off allows the app to connect to the internet, despite your phone being locked until standby.
Going off to cross-post this elsewhere because I've searched SO many pages trying to find a fix, and nobody mentioned trying this.
Just a quick question to anyone how maybe be running Android 13 and also using Samsung gear/wear app.
Does the app actually work with devices connected? As in are you able to access features?
I have it installed and devices connected (Galaxy buds Live, Galaxy Buds Pro, Galaxy Watch 4) however in the app they appear to not be connected, and tapping connect does nothing. They do work (mostly). I am sure the app just needs updated for 13, but curious if anyone possibly upgraded from 12/12L and it actually works. I had a brain fart and ended up having to wipe device, so i just installed 13, but if anyone upgraded and it works, I will re-install 12 and upgrade through the normal path.
Make sure the Wearables app has all the many permissions it needs enabled or it will puke on you.
I just went through this with it. It seems Samsung changed and increased the number of needed permissions. Google play Services must be enabled at least initially for Wearables to detect the bt devices. If all of these conditions are not met it will behave erratically when detecting devices or completely fail to connect.
Also try a network reset.
Even on Samsung phones this app is a nosey Parker problem child
It gave me a run for my money...
blackhawk said:
Make sure the Wearables app has all the many permissions it needs enabled or it will puke on you.
I just went through this with it. It seems Samsung changed and increased the number of needed permissions. Google play Services must be enabled at least initially for Wearables to detect the bt devices. If all of these conditions are not met it will behave erratically when detecting devices or completely fail to connect.
Also try a network reset.
Even on Samsung phones this app is a nosey Parker problem child
It gave me a run for my money...
Click to expand...
Click to collapse
Thanks, ya I did all that. That also lead me to believe it has more to do with it needing updated for 13 as all the devices are allowed notification access, but wear asks to allow access. says it cant show notifications on the watch, even though all the permissions and notification access are allowed.