having problem syncing the new watch faces on the watch?
furiousgtz said:
having problem syncing the new watch faces on the watch?
Click to expand...
Click to collapse
Same problem here, tried resetting watch, phone etc. Also uninstalled and re installed still not showing up.
2crazeybolt said:
Same problem here, tried resetting watch, phone etc. Also uninstalled and re installed still not showing up.
Click to expand...
Click to collapse
Me too! I did all of that. I just got new a new replacement note 4 and it was working fine on my previous note 4 but this will not sync any faces or no moto app.
ok I was able to get it working. I factory reset the watch and via android wear I added new wearable device and clicked on sync all app.
furiousgtz said:
ok I was able to get it working. I factory reset the watch and via android wear I added new wearable device and clicked on sync all app.
Click to expand...
Click to collapse
That did the trick, thanks i'm working good now.
Reset my phone three times and no love. I can update the original stock faces but thennew faces never show up
Same thing happened to me today. I've reset my phone 3 times and resync'd many times without any luck. Any suggestions?
Edit:
Finally, I was able to fix it. My case was as follows:
I had paranoid android installed (new faces were fine). Had to restore factory settings on my phone, phone didn't want to sync after I reset my phone so I restored factory settings on my phone. I lost the new faces. Tried resetting the phone and watch multiple times and it didn't work. I went back to stock 5.0 (LRX21O) by following this guide . After restoring my phone to stock, I reset the watch one last time. Paired the phone and watch, customized one of the new faces chose minimal face on watch (still no new faces on my phone), then customized the same new face again, when trying to select another face it only showed one (simple). I chose that one, then tried to change to a new face and viola! new faces appeared.
Not sure what of everything I did was the fixing factor but wanted to share. Hope this helps.
Faced same problem. But i managed to update my 360. Try to uninstall all 3rd party app on ur phone, uninstall motoconnect and android wear. Last step is factory reset ur moto360
Then install motoconnect, install android wear ( do not install any 3rd party app at this stage), go to android wear setting and resync available app. Just make sure your phone screen is on about 10 minutes or so, moto360 will reboot after that.
All new faces and moto body apps will show up eventually - i tried this 3 times.
Hope this may help
Motorola 360 new watch faces not showing up on watch
I had the same problem, new watch faces would show in connect app (particularly the My Design one) and I could customize them but the new ones would never show up as an available watch face option on the 360. It may be related to replacing your phone as the new watch faces worked fine with my Old Note 4 then I had to replace it (because it had a problem) so when I got my replacement Note 4 and reconnected my watch it would never give me the option for the new watch faces even after I "reset" the Moto 360 numerous times. Interestingly for some people the new watch face options don't even show up in their Motorola Connect App on their phone, I think it may be related to their phone OS version. I have a coworker with a Note 3 and the new watch faces are not a option even though his motorola connect app is up to date.
Here is what I did to fix my 360:
- uninstall all apps on your phone related to your watch (Motorola Connect, Android Wear, 3rd party, etc.)
- Reset your 360 back to factory. (not just a restart)
- Wait for watch to prompt to install Wear on phone.
- install wear on phone, it will remember your old watch, pick the menu option to forget that watch though so it acts like this is the first time you are setting up a watch.
- Go through the watch pair and setup routine with the wear app till you get to the main wear screen that shows the watch connected and what your voice actions are.
- Go through the training setup on your watch (swipe, swipe....) till it's to it's Normal screen with your notifications.
- Install Motorola Connect app on your phone, go through the setup and wait till it says "connected" to your watch
- Set your phone and your 360 down and don't touch either for 15 minutes (no new apps, settings, etc)
- Your new watch faces should now be on your 360.
- re install the rest of your wear junk.
Those who have problems syncing , keep the watch on charging and charge your phone as well . do not reset anything. Just resync all apps option in android wear app. They will show up automatically after few mins
[email protected] said:
Those who have problems syncing , keep the watch on charging and charge your phone as well . do not reset anything. Just resync all apps option in android wear app. They will show up automatically after few mins
Click to expand...
Click to collapse
After this latest Moto Connect update I'm still waiting to see the new faces in the Android Wear app. I got the update almost 24 hours ago and nothing. I have tried re-syncing, resetting the watch, all that stuff. What is funny is I can go download a new random watch face and within a few minutes it shows up. But the new Connect app doesn't seem to be working. However if I am in the Connect app and "customize" a face and hit "Apply" it makes the watch vibrate. I also cannot change the color of the charging dock face... Crazy, not sure what the issue is.
supercluver said:
After this latest Moto Connect update I'm still waiting to see the new faces in the Android Wear app. I got the update almost 24 hours ago and nothing. I have tried re-syncing, resetting the watch, all that stuff. What is funny is I can go download a new random watch face and within a few minutes it shows up. But the new Connect app doesn't seem to be working. However if I am in the Connect app and "customize" a face and hit "Apply" it makes the watch vibrate. I also cannot change the color of the charging dock face... Crazy, not sure what the issue is.
Click to expand...
Click to collapse
Have you tried clearing app data for the connect app on the phone, then uninstall it. Reboot both the phone and watch. Then once the phone and watch are connected again, download the connect app.
DQEight said:
Have you tried clearing app data for the connect app on the phone, then uninstall it. Reboot both the phone and watch. Then once the phone and watch are connected again, download the connect app.
Click to expand...
Click to collapse
Yeah. Apparently, and I should have guessed this, it is an issue with my running the 6.0 preview 3 on my nexus 6. So yeah, sucks but M is worth not having a couple new watch faces and a different color charging face.
supercluver said:
Yeah. Apparently, and I should have guessed this, it is an issue with my running the 6.0 preview 3 on my nexus 6. So yeah, sucks but M is worth not having a couple new watch faces and a different color charging face.
Click to expand...
Click to collapse
I thought it was M p3 too, i even removed all my wear apps and reseted the watch XD
Motorola told me to "unoptimize" the wear abb (from the battery options).
I asked if it could not be an incompatibility with M, but they did no know.
EDIT: motorla lvl2 suppoty called, they say that the newer API level in android 6.0 makes it incompatible with moto connect update
[email protected] said:
Those who have problems syncing , keep the watch on charging and charge your phone as well . do not reset anything. Just resync all apps option in android wear app. They will show up automatically after few mins
Click to expand...
Click to collapse
Thanks, worked PERFECTLY!
Sent from my Nexus 6 using Tapatalk
cocchiararo said:
I thought it was M p3 too, i even removed all my wear apps and reseted the watch XD
Motorola told me to "unoptimize" the wear abb (from the battery options).
I asked if it could not be an incompatibility with M, but they did no know.
EDIT: motorla lvl2 suppoty called, they say that the newer API level in android 6.0 makes it incompatible with moto connect update
Click to expand...
Click to collapse
They DO know that 6.0 is about to be released right? Ugh. Guess I'll stop trying to get this to work on my Nexus 6.
supercluver said:
After this latest Moto Connect update I'm still waiting to see the new faces in the Android Wear app. I got the update almost 24 hours ago and nothing. I have tried re-syncing, resetting the watch, all that stuff. What is funny is I can go download a new random watch face and within a few minutes it shows up. But the new Connect app doesn't seem to be working. However if I am in the Connect app and "customize" a face and hit "Apply" it makes the watch vibrate. I also cannot change the color of the charging dock face... Crazy, not sure what the issue is.
Click to expand...
Click to collapse
i have the same problem, factory reset watch and nothing happend, if anybody have a solution please...
santiagodm said:
i have the same problem, factory reset watch and nothing happend, if anybody have a solution please...
Click to expand...
Click to collapse
if you are on 6.0, then you have to wait for an update from motorola.
cocchiararo said:
if you are on 6.0, then you have to wait for an update from motorola.
Click to expand...
Click to collapse
ok, Thanks cocchiararo, just have to wait
I don't have the option to change the charging colors. Swiping down on the watch face does nothing, and there isn't an option for it in Motorola Connect. I'm running the latest Moto 360 software on the watch, and my phone is running OS 5.1.
I have had to reset my Moto 360 and repair it with my Samsung Galaxy S6. When I go into the Android Wear app, I am noticing several of my watch faces are missing. Some of them do eventually reappear. I know the watch faces are still on my phone because when I try to reinstall them, they show already installed. Is there a way to get the Android Wear application to refresh the watch faces that are on the phone? This seems like a stupid bug since it seems the watch needs to be reset every so often and I always seem to have this problem. I can't believe I have to remove and reinstall all the faces especially since I do not remember all the ones I bought without going through a long history of my app purchases.
I've had this happen a few times and this time I was digging around in the settings of the Android Wear app.
Tap the cog in the top right corner>Select your watch name>Tap Resync Apps.
See if that works for you. My watch synced everything except the faces and that fixed it for me.
Not working for me with Quick pic. Nexus 6.
Same message as photos stopped.
Give it time after a reset or new/replacement watch. If it's on your phone it will eventually appear on the watch. Last time I reset it, it took approximately 2 hours to get back to normal.
I've stumbled upon a dilemma.
I recently installed a new rom on my Xperia Z3. This unpaired the phone and the watch. On the watch i have a heavily customized Intellicom watch face that i spent many hours creating.
The problem is that i never backed up or uploaded this watch face. So, if i now factory reset my watch in order to pair it with my phone, i'm going to lose the watch face on my watch as the Intellicom app will sync a default watch face to it.
So my question is this: is anyone aware of a way that i can backup the watch face on the watch itself, so i can load it into the Intellicom app and resync it to my watch after i've paired it with my phone again?
Do you have es file Explorer installed? I would use that to back up the face. I do not know where it saves them, but I bet you could find it with some poking around.
Sent from my SM-T810 using Tapatalk
I recently upgraded my HTC One M8 from CM13 to Lineage 14.1. I did a full wipe of the phone, installed the latest OpenGApps and reinstalled all my apps including the latest Android Wear app. I also wiped my Smartwatch 3 and reconnected it to my phone. Since the upgrade the stepcount from my watch isn't syncing to my phone (or online to fit.google.com). Other stuff syncs and all my apps are there as they were previously (Skype, Whatsapp, Hangouts, Maps, Music etc. Plus if I start a fit workout on my watch, this syncs fine and is displayed on my phone and online. It just seems to be steps, activity time and calories that don't get sync'd.
I have hard-reset the watch a couple of times, resync'd apps etc and the behaviour is the same. Currently my watch is displaying 729 steps and 641 calories. My phone (and online) however are showing 263 steps and 743 calories.
Any ideas?
Andy
EDIT: I have been playing around with resetting various things and it seems it is just one-way that isn't working - from the watch. So I managed to clear everything off on the watch and it then sync'd the steps recorded on the phone to the watch (311 steps). I then put the watch back on my wrist and now it says 327 steps on the watch, however the phone and online still says 311. I then took the watch off and walked about a bit with my phone in hand and the screen on and the steps increased to 399. Shortly after this appeared online and my watch updated to 415 steps. I then put the phone down and put the watch back on, walked about a bit and the steps increased on it to 450, however the phone and online still say 399.
So it appears to be just the steps (and calories) that aren't syncing from the watch to the phone, however its working from the phone to the watch.
hmm....
ADB100 said:
I recently upgraded my HTC One M8 from CM13 to Lineage 14.1. I did a full wipe of the phone, installed the latest OpenGApps and reinstalled all my apps including the latest Android Wear app. I also wiped my Smartwatch 3 and reconnected it to my phone. Since the upgrade the stepcount from my watch isn't syncing to my phone (or online to fit.google.com). Other stuff syncs and all my apps are there as they were previously (Skype, Whatsapp, Hangouts, Mas, Music etc. Plus if I start a fit workout on my watch, this syncs fine and is displayed on my phone and online. It just seems to be steps, activity time and calories.
I have hard-reset the watch a couple of times, resync'd apps etc and the behaviour is the same. Currently my watch is displaying 729 steps and 641 calories. My phone (and online) however are showing 263 steps and 743 calories.
Any ideas?
Andy
EDIT: I have been playing around with resetting various things and it seems it is just one-way that isn't working - from the watch. So I managed to clear everything off on the watch and it then sync'd the steps recorded on the phone to the watch (311 steps). I then put the watch back on my wrist and now it says 327 steps on the watch, however the phone and online still says 311. I then took the watch off and walked about a bit with my phone in hand and the screen on and the steps increased to 399. Shortly after this appeared online and my watch updated to 415 steps. I then put the phone down and put the watch back on, walked about a bit and the steps increased on it to 450, however the phone and online still say 399.
So it appears to be just the steps (and calories) that aren't syncing from the watch to the phone, however its working from the phone to the watch.
hmm....
Click to expand...
Click to collapse
Just to let you know you're not the only one, I'm experiencing the exact same issue. I bought the SW3 to replace my FitBit charge HR, but still wanted my steps to sync to the fitbit app (my health insurance uses fitbit data for rewards but doesn't support Google Fit). Managed to find a third party solution, but the steps are always significantly lower than are recorded on the watch - so again, steps are not syncing from the watch to the google fit app/fitbit app, but ARE syncing the other way around :/
I un-paired my SW3 from my phone (HTC One M8 running the latest Lineage nightly) and the SW3 did a factory reset. On initial pairing and syncing I was left with the old Google Fit app on the watch - the one without the 'Fit Activity' option. I noticed however that the steps, distance and calorie information recorded on the SW3 sync'd with Google fit on my phone.
I went through the hoops trying to get the latest Android Wear Google Fit application loaded on the watch (v1.64.06-200) eventually having to sideload it via ADB. Its installed now however the steps, distance and calorie information are no longer sync'd so I guess this is a bug in either the wearable Fit .apk or the phone Fit .apk. Starting a Fit activity on the watch such as walking sync's OK so I am wondering whether this is a design feature?
Andy
Same issue
Difficult to digest this is still not resolved. My steps and activities captured on Sony smartwatch 3 aren't getting synced with phone or web. Any workaround please?
guys could it be i have the same issue, is it elated to this thread
https://forum.xda-developers.com/smartwatch-3/help/guide-fix-notifications-apps-syncing-to-t3770415
i tried to test it but because imon android 9 DP2 i keep getting issues with android wear app
Have been trying forever to get the Facer and Watchmaker apps working with my Smartwatch 3 watch. My Android Wear app is connected to the watch and works fine but I cannot get the other 2 apps to work. Have repaired the watch several times with my Note 5 with no luck. It will show its sending the watch face to the watch but it never makes it there. WatchMaker will eventually come up and say it can't connect to the watch even when Android Wear says it is connected. Try to do the Remote install option and it just says to look at the watch but nothing happens. I know we don't have Android Wear 2.0 so I can see why that option isn't working. I've tried everything I can think of to make these apps work. Is there something I'm missing?
I have found Facer to be inconsistent with pushing watchfaces over to either of the phones I've paired it with (S7 Edge and S5). Firstly I would sync apps in the android wear app. One sure way I have found to make sure Facer detects the watch and vice versa is to tap and hold the watch screen and make sure the Facer option is present and then push the Facer face through on the phone while you are on the face choosing menu. I know this answer is a bit airy fairy, but it works with me and I am unsure why, being merely a user with little idea about how Facer is progrmamed. Perhaps it opens the Facer app on the watch when you choose faces?