I have been using these on my Galaxy S2 and Tab. I didn't like the idea when I was browsing for a new case on Ebay, but when I got it, I soon changed my mind!
If anyone finds anything like it then please post on this thread!
http://www.ebay.co.uk/itm/Gel-TPU-C..._MobilePhonesCasesPouches&hash=item43a90b8802
looks like a great idea....but i think i would prefer if the clear stand part be black or grey in colour instead
They come in many different colours and styles. And with stand / without stand
I found something very similar (or identical):
http://www.alibaba.com/product-gs/522134318/S_Line_Crystal_Plastic_TPU_Protector.html
There are other variants on alibaba, the only problem is that the minimum quantity is usually 50-100 pieces :-/
EDIT: found it on ebay: http://www.ebay.com/itm/BLACK-HYBRI...AU_MobilePhoneAccessories&hash=item48436c47a9
I bought one before seeing this thread.
When I receive it, I'll tell you if its good/bad etc
when i find something good
，will let you know
I searched on ebay for "galaxy note kickstand case TPU" and got a result:
http://www.ebay.com/itm/BLACK-HYBRI...AU_MobilePhoneAccessories&hash=item48436c47a9
I eneded up ordering for around $8 the kickstand case with included car charger and 3 screen protectors. Will reply here with a review here once I get it.
I bought one of these too. I figure you can't go wrong for $5.
Sent from my GT-N7000 using Tapatalk
For $8 I got a car charger, 3 screen protectors and the case.
The case:
Black TPU and Grey Silicon.
Kickstand is Silicon and a part of the case's mainframe.
The Kickstand works well.
The TPU is knife-proof and tamper proof, but dont drop it from a 2.5+ metre height.
The TPU has textured sides which help with grip A LOT.
All the holes and ports (pen) are easily accessible.
The buttons are covered but NOT hard to press.
Whole case is quite thin, so its not very "drop proof" but very resistant to heat and cuts.
Did I say it is thin, so it still fits in my pockets easily.
Verdict: 9/10
This has replaced my Carbon Fibre case (which was protective). This case is a MUST HAVE for any NOTE owners.
Sidenote: I also bought the GPS holder ($6) from the same seller "telegaming", it is also a high quality piece.
Just ordered Pu Leather Design Hard Back One Piece Cover Case For Samsung Galaxy Nexus for my white Galaxy. I ordered the Orange,yellow and black color. Been looking for a leather back case and was not able to find any. Hopefully, some of you might like them too.
They are coming cheap, so can't vouch for the quality atm, will try to do a review once i receive them.
ebay.com/itm/400279111234?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
add www in front of the URL above to go to the ebay listing.
psood21 said:
Just ordered Pu Leather Design Hard Back One Piece Cover Case For Samsung Galaxy Nexus for my white Galaxy. I ordered the Orange,yellow and black color. Been looking for a leather back case and was not able to find any. Hopefully, some of you might like them too.
They are coming cheap, so can't vouch for the quality atm, will try to do a review once i receive them.
ebay.com/itm/400279111234?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
add www in front of the URL above to go to the ebay listing.
Click to expand...
Click to collapse
They have them on Amazon & they are not getting very good reviews. The cut-out holes are off-center and rough seems to be the leading issues. They are around $4 there, too.
Hi,
My friend showed me his iPhone case, and it was some sort of hard-ish rubbery clear stuff that doesn't get caught when you slip it into your pocket, etc.
I can't remember the name of the material, but it felt really nice and I really hope there is a version of it for the sgs2. Anyone got any ideas?
Thanks
The sticky, "traditional" rubber material is silicone, AFAIK.
The "modern", non-sticky material is called TPU, an abbreviation for Thermoplastic polyurethane.
You should find plenty of those cases on eBay or other platforms.
cold_reading said:
The sticky, "traditional" rubber material is silicone, AFAIK.
The "modern", non-sticky material is called TPU, an abbreviation for Thermoplastic polyurethane.
You should find plenty of those cases on eBay or other platforms.
Click to expand...
Click to collapse
yes there are very cheap and good quality tpu cases, look for "s line" cases on ebay, are really well-made
I got this case for my S II and its nice. It fits perfectly and it feels nice.
And my S II is kinda safer now
http://www.ebay.com/itm/Blcak-Color...361850?pt=PDA_Accessories&hash=item3cc2bf68ba
Houselegend said:
I got this case for my S II and its nice. It fits perfectly and it feels nice.
And my S II is kinda safer now
http://www.ebay.com/itm/Blcak-Color...361850?pt=PDA_Accessories&hash=item3cc2bf68ba
Click to expand...
Click to collapse
Looks nice, But doesn't that make your slim SGS2 a bit thick ?
I recommend the Incipio NGP. One of the most solid cases I've ever used and not overpriced.
+1 for the Incipio NGP
Try this, very good case for S2
http://www.momax.net/en/Product_Show.aspx?ID=1475&T=1
My second case was a white TPU case on my black phone, looked really good but after a while started turning blue from the dye in my jeans haha. So I bought another cheap TPU case from amazon, this time a clear but smokey black, looked really nice on the phone and didn't change colour.
The material I was thinking of was polycarbonate. I could only find a few that apparently use the material, and ended up buying an SGP case (on ebay here). I think its also available at www.sgpstore.com, because the box it came in had that link on it.
It's quite durable imo, nice and thin, doesn't take away from the sexiness of the sgs2. Overall it is one of the better cases I have bought.
Edit: it looks like it's just a cheap chinese rip-off of the sgp ultra-thin case. Found it cheaper here. Oh well, I'm happy to pay $5 extra if it comes in 2 days
Got this on a whim, was really cheap with free shipping. Fits the phone super tight, has exposed buttons and its super glossy. Not that bad of a finger-print magnet as its blue. The actual color is a bit blue-er than the one pictured on ebay, but I can live with it.
Phone is pictured with white vinyl conversion sticker, btw.
Link: http://bit.ly/Lj11u4
I bought a similar one, it was $2.95. The first one I got was a little loose so I told them and they sent me a new one right away that fit perfectly snug. Love cheap TPU cases
http://www.ebay.com/itm/140648577057?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
I'm looking for the thinnest, sleekest case possible for my s10+. Does anybody have any experience with the totallee cases? They look nice, and they get mentioned in all the case roundup articles. But $29 is super pricey for a thin case like this.
What do y'all think? Is there anything better or cheaper than this one?
totallee Thin Galaxy S10 Plus Case, Thinnest Cover Ultra Slim Minimal - for Samsung Galaxy S10+ (2019) (Solid Black) https://www.amazon.com/dp/B07P21SS17/ref=cm_sw_r_cp_apa_i_pYZRCbYQZ22QM
Personally, I am a fan of the Pitaka cases. Pricey, but at least for a reason. I made some pictures:
https://forum.xda-developers.com/s10-plus/accessories/pitaka-aramid-case-s10-s10-s10e-t3912822
corwin_amber said:
Personally, I am a fan of the Pitaka cases. Pricey, but at least for a reason. I made some pictures:
https://forum.xda-developers.com/s10-plus/accessories/pitaka-aramid-case-s10-s10-s10e-t3912822
Click to expand...
Click to collapse
I agree with the Pitaka case. I got mine yesterday with their qi car mount. While they are pricey I couldn't be happier with the setup.
---------- Post added at 08:08 PM ---------- Previous post was at 08:05 PM ----------
privatedoodle said:
I'm looking for the thinnest, sleekest case possible for my s10+. Does anybody have any experience with the totallee cases? They look nice, and they get mentioned in all the case roundup articles. But $29 is super pricey for a thin case like this.
What do y'all think? Is there anything better or cheaper than this one?
totallee Thin Galaxy S10 Plus Case, Thinnest Cover Ultra Slim Minimal - for Samsung Galaxy S10+ (2019) (Solid Black) https://www.amazon.com/dp/B07P21SS17/ref=cm_sw_r_cp_apa_i_pYZRCbYQZ22QM
Click to expand...
Click to collapse
If you just want thin basic case besides the Pitaka I have both of these. Both are nice.
Spigen Thin Fit (Air - Extra Thin) Designed for Samsung Galaxy S10 Plus Case (2019) - Black https://www.amazon.com/dp/B07MG8YR53/ref=cm_sw_r_cp_apa_i_hb5RCbGWZ4S89
This one has a feel like the OnePlus Sandstone.
Galaxy S10 Plus Case, Arkour Minimalist Ultra Thin Slim Fit Hard Plastic Cover Case with Non Slip Matte Grip Surface Phone Case for Samsung Galaxy S10 Plus (Gravel Black) https://www.amazon.com/dp/B07MW14WBN/ref=cm_sw_r_cp_apa_i_Ic5RCb5SYC7VG
bp328i said:
This one has a feel like the OnePlus Sandstone.
Galaxy S10 Plus Case, Arkour Minimalist Ultra Thin Slim Fit Hard Plastic Cover Case with Non Slip Matte Grip Surface Phone Case for Samsung Galaxy S10 Plus (Gravel Black) https://www.amazon.com/dp/B07MW14WBN/ref=cm_sw_r_cp_apa_i_Ic5RCb5SYC7VG
Click to expand...
Click to collapse
This one looks interesting. Hard to tell from the photos though - how much of a "lip" does it have at the top and the bottom? Any edge at all to protect the screen?
corwin_amber said:
Personally, I am a fan of the Pitaka cases. Pricey, but at least for a reason. I made some pictures:
https://forum.xda-developers.com/s10-plus/accessories/pitaka-aramid-case-s10-s10-s10e-t3912822
Click to expand...
Click to collapse
That looks great, but not sure if I can swing a $50 case - especially when I'm already springing for the $50 screen protector!
privatedoodle said:
This one looks interesting. Hard to tell from the photos though - how much of a "lip" does it have at the top and the bottom? Any edge at all to protect the screen?
Click to expand...
Click to collapse
Really none, it's basically flush. When I set the phone face down with that case on it kind of feels like the screens not touching but I can't slide a piece of paper under it.
Here are some photos I just took.
I have the totalee case, fit and finish is whats expected from these kinda cases, which is what I love, but if you can find the same thing cheaper from another brand buy it, they really are all the same.
Check out MNML. Almost identical to Totallee, but much less expensive (around $18 with shipping and first time buyers discount). They ship from China, so expect 2-3 weeks for shipping.
the-other-gordo said:
Check out MNML. Almost identical to Totallee, but much less expensive (around $18 with shipping and first time buyers discount). They ship from China, so expect 2-3 weeks for shipping.
Click to expand...
Click to collapse
I've had this brand for all my past phones, definitely one of my favs
privatedoodle said:
I'm looking for the thinnest, sleekest case possible for my s10+.
Click to expand...
Click to collapse
https://rhinoshield.io/pages/crashguard look at the drop test, 11 feet, no harm.
I used to have a Peel case for my Pixel 2 XL and Pixel 3 XL. They were really thin, had a white-ish variant that showed some transparency. I was thinking about getting one for my S10+, but ended up sticking with Samsung's silicone case. I like the grip.
privatedoodle said:
I'm looking for the thinnest, sleekest case possible for my s10+. Does anybody have any experience with the totallee cases? They look nice, and they get mentioned in all the case roundup articles. But $29 is super pricey for a thin case like this.
What do y'all think? Is there anything better or cheaper than this one?
[/url]
Click to expand...
Click to collapse
Usually these non brand PP cases are 99 cents from China since this is X-Level branded it's a little more. I replace every few months because over time from wireless charging or heat, corners tend to expand.
https://www.ebay.com/itm/254161735325/
I have the clear Totalee but for $28.99 it yellows too quick. I use the clear X-Level but going to try this one in clear white - I used the crystal for my Pixel 3 and replaced every 2-3 months but seemed like thinner better case than Totallee for the money
I have 3 thin cases:
Pitaka - Most expensive, somewhat slippery, carbon fibre material gets dirty quickly with palm grease / sweat, Looks good, no raised corners for placing phone screen down.
Nillkin Frosted Shield - Has raised corners, good grip, cheap, looks decent.
Spigen Thin Fit Air (Black) - Skinniest and grippiest of the 3. Soft feel material shows palm grease / sweat. No raised corners. Note: I can only vouch for grip on the black version (soft feel). Spigen cases in non-black colours can be slippery (no soft feel material).
I use Nillkin the most whenever I need a slim case. It's the perfect balance of grip, looks and raised corners.
Sent from my SM-G975W using Tapatalk
bp328i said:
Really none, it's basically flush. When I set the phone face down with that case on it kind of feels like the screens not touching but I can't slide a piece of paper under it.
Here are some photos I just took.
Click to expand...
Click to collapse
Tried one of these and ended up sending it back. The sandstone finish started peeling and flaking off after about two days.
Then I tried one of the leather cases from ESR; I liked the feel of the Samsung leather case but didn't want to pay $50 for it. That one was a bust too. The case was thicker than I expected, and the corners didn't sit flush against the phone. Bummer.
So I went ahead and ordered the Totallee. It'll be here tomorrow, and I'll report back!
I have the Pitaka one and I like it a lot. Super thin... Don't drop the phone.
privatedoodle said:
So I went ahead and ordered the Totallee. It'll be here tomorrow, and I'll report back!
Click to expand...
Click to collapse
The Totallee case is really nice. Unbelievably thin, and a great fit. Not sure if it'll survive too many drops, but it's super comfy to hold and it looks awesome. Nice little lip around the camera bump, but not obtrusive like on the Spigen thin case. No lip on the front though. I'll be getting a Whitestone Dome Glass shortly, and I don't think it'll have any problems fitting with this case.
Two tiny complaints. One, it's a little more slippery than I expected. The smooth finish on the solid black case doesn't provide much in the way of grip. And finally, the case is just about the same thickness as the phone's buttons, so the buttons now sit more or less flush with the sides of the case. Makes it a little harder to find the buttons by feel, but I'll probably get used to that pretty quickly.
All in all, I'm extremely glad I spent the few extra bucks for this one. The Pitaka looks awesome too, but this was about as high as my price range could go and it's a good choice for me.
In my experience, Totallee cases are better compare with their direct competitors such as MNML. I also have tried cheap ultra thin cases as well and i can say that those from Totallee are with better quality and fit. With proper care, it will fit your device nicely for a long time.
I use the ultimate shield cases, its at least as good as totalee for lower cost.
https://www.ultimateshield.co.uk/
Spigen thin fit is 10$ and unbelievably thin, you won't even realize it's there