VoLTE on Q Beta 6? - Google Pixel 3 XL Questions & Answers

VoLTE on Q Beta 6? - Google Pixel 3 XL Questions & Answers

Hey guys! I'm desperately trying to find a way to turn on volte on my device with my hungarian carrier Telenor Hungary. Officially, the device with Android Pie is not supported on my carrier. Perhaps on Q Beta 6?
Can someone (rooted on Q Beta 6) please check the folder below to see if it contains "Hungary" folder?
need root explorer
mbn files for Pixel 3 are in:
vendor\rfs\msm\mpss\readonly\vendor\mbn\mcfg_sw\generic\EU\Telenor\Commercial\
thx a lot

I have a pixel 3 xl on beta 6. Shows only this in the folder

gogoffm said:
I have a pixel 3 xl on beta 6. Shows only this in the folder
Click to expand...
Click to collapse
That's bad news, but thank you. If not too big a request, could you upload the full mbn folder in a zip file?

VoLTE in the Czech Republic
gogoffm said:
I have a pixel 3 xl on beta 6. Shows only this in the folder
Click to expand...
Click to collapse
Hello, could you (or anybody else) please show me all the files in there? I'm looking for anything Czech Republic, so probably in vendor\rfs\msm\mpss\readonly\vendor\mbn\mcfg_sw\generic\EU\... There are 3 VoLTE supporting carriers in the Czech Republic: T-Mobile, O2 and Vodafone, so if there is anything about them in these files, could you please provide me with a screenshot as well? Thank you very much in advance.

I have a pixel 3 on Android 10. There are 2 mbn files on it.
1. vendor\rfs\msm\mpss\readonly\vendor\mbn\mcfg_sw\ge neric\EU\Vodafone\Volte\CZ\mcfg_sw.mbn
2. vendor\rfs\msm\mpss\readonly\vendor\mbn\mcfg_sw\ge neric\EU\DT\Commercial\CZ\mcfg_sw.mbn
Both are approx. 42 KB.
Unfortunately mbn_sw.txt file does not point to these files...

pheco said:
I have a pixel 3 on Android 10. There are 2 mbn files on it.
1. vendor\rfs\msm\mpss\readonly\vendor\mbn\mcfg_sw\ge neric\EU\Vodafone\Volte\CZ\mcfg_sw.mbn
2. vendor\rfs\msm\mpss\readonly\vendor\mbn\mcfg_sw\ge neric\EU\DT\Commercial\CZ\mcfg_sw.mbn
Both are approx. 42 KB.
Unfortunately mbn_sw.txt file does not point to these files...
Click to expand...
Click to collapse
What's mbn_sw.txt? I'm new to Pixels so sorry about that. Shouldn't I be able to point it to these files with root (after I root my device)? DT is probably T-Mobile, as it is Deutsche Telekom, right? Thank you for your help so far.

ondrejkonicar said:
What's mbn_sw.txt? I'm new to Pixels so sorry about that. Shouldn't I be able to point it to these files with root (after I root my device)? DT is probably T-Mobile, as it is Deutsche Telekom, right? Thank you for your help so far.
Click to expand...
Click to collapse
Yes, DT is T-Mobile.
Mcfg_sw.mbn files are carrier-specific modem configuration files. And there's mbn_sw.txt file in vendor partition of Pixel 3. It is a list file that contains paths to mcfg_sw.mbn files, which can be loaded to EFS. Its contents depend on the Pixel 3 ROM build, so paths to mcfg_sw.mbns for czech providers should be added to current mbn_sw.txt file in /vendor/rfs/msm/mpss/readonly/vendor/mbn/mcfg_sw directory.
On Pie that modification was possible after root and with AVB 2.0/dm-verity fully disabled (ex. with Proton kernel) but on Android 10 it is impossible to manage the system partition . At least for now ...

pheco said:
On Pie that modification was possible after root and with AVB 2.0/dm-verity fully disabled (ex. with Proton kernel) but on Android 10 it is impossible to manage the system partition . At least for now ...
Click to expand...
Click to collapse
Well, that sucks, as I have to do that hack for my lte to work, so no upgrade for me. Thanks Google

pheco said:
On Pie that modification was possible after root and with AVB 2.0/dm-verity fully disabled (ex. with Proton kernel) but on Android 10 it is impossible to manage the system partition . At least for now ...
Click to expand...
Click to collapse
Is it possible to downgrade to Pie, unlock bootloader, root, flash Proton kernel, edit the mbn_sw.txt file so it points to the Czech mcfg_sw.mbn, then flash the stock kernel again, lock the bootloader and upgrade to Android 10 without anything resetting the mbn_sw.txt file? Or is it due to reset when you upgrade from Pie to Q or in any other steps like locking the bootloader? Is it even possible to downgrade to Pie? Thanks a lot again.
EDIT: Or at least downgrade to Pie, unlock bootloader, root, flash Proton kernel, edit the mbn_sw.txt file so it points to the Czech mcfg_sw.mbn (and maybe then flash the stock kernel again and lock the bootloader), if upgrade to Android 10 would ruin it again? Just wanna know how far would I be able to get Thanks again.

ondrejkonicar said:
EDIT: Or at least downgrade to Pie, unlock bootloader, root, flash Proton kernel, edit the mbn_sw.txt file so it points to the Czech mcfg_sw.mbn (and maybe then flash the stock kernel again and lock the bootloader), if upgrade to Android 10 would ruin it again? Just wanna know how far would I be able to get Thanks again.
Click to expand...
Click to collapse
Yes, it will ruin it. Any time vendor.img changes you need to reapply the change to the file. Only way it will work for now is if you run latest pie with the modified file. Until we can modify vendor partition on Q, you can only fix the issue with P.

Related

[ROM][6039][UNOFFICIAL] Android 6.0.1 Marshmallow

Android 6.0.1 Marshmallow for Alcatel Idol 3 4.7" 6039Y
This is unofficial Android 6.0.1 Marshmallow firmware ported by myself from USA version of Idol 3 4.7" OT-6039S. Firmware is 1:1 as original but with additional languages support. Official 6039S firmware has only five languages - English (United Kingdom), English (United States), Espanol, Francais and Italiano. My version is customized and supports much mode languges: Russian, Ukrainian, Deutsch, Eesti, English (both, USA and UK), Francais, Latviesu, Lietuviu and Romana. Here is some screenshots (see in Attached Thumbnails).
Installation instruction
1. First of all you must install TWRP on your Idol 3 4.7", there are several methods how to do that (all of them described on this forum). You can use fastboot (if flash and boot commands are not locked in your firmware), or you can use QFIL to return fastboot commands implementation and flash TWRP.
2. Download and unpack following archive in a separate folder - idol347-android-6.0.1-rus-twrp-backup.rar (archive password is decker.su)
3. Boot in TWRP and make backup of your current firmware (!), it's important. Choose Backup option in TWRP's main menu, select Storage as external SD card and make backup of your system and boot partition.
4. Make Wipe / Factory reset through TWRP menu. If you have CM (Cyanogen) Mod ROM installed, make sure that after wipe your Cache and Data partitions are formatted in Ext4 (if not, for example you have f2fs cache and data - format they to Ext4 through TWRP, it's important).
5. After you make your backup on external microSD - you'll have the following folder structure. TWRP -> Backups -> xxxxyyyy, where is xxxxyyyy is a 8 alpha-digital "number". It's unique for each device.
6. Copy this folder 2016-06-11--05-25-24_MMB29M_release-keys from archive to xxxxyyyy folder on microSD and choose Restore in TWRP.
7. Reboot the phone !
After reboot Android can boot 5-7 minutes first time. It's normal. Welcome to the Android 6.0.1 Marshmallow
Project URL [RU]: http://www.decker.su/2016/06/alcatel-idol-3-47-6039y-android-601-marshmallow.html (in Russian)
Project URL [EN]: https://goo.gl/kkcXdr (using Google Trasnlate)
Warning: Content in this article are available for educational purposes. All the steps in this article is at your own risk! Author (s) the article is not responsible for the failed equipment, as a result of an error or misunderstanding you the meaning set out in her material, and also by virtue of any direct and indirect causes, which could potentially lead to a malfunction of your device, or any other problems with him. If you are not confident in their abilities, doubt, etc. - Do not perform any of the above. Using material from this article, you agree that the responsibility for your actions carry you and only you.

Hey thanks for the work!! I have been using these since yesterday, works great on my 6039A, the only problem I found was that I can't set any type of secuirty for my lockscreen, just "None" and "Swipe" work, the rest make settings FC.
Also, is there a way to add spanish back again?
Those 2 are minor issues anyway, thanks for giving people from outisde US MM

Phantom410 said:
Hey thanks for the work!! I have been using these since yesterday, works great on my 6039A, the only problem I found was that I can't set any type of secuirty for my lockscreen, just "None" and "Swipe" work, the rest make settings FC.
Click to expand...
Click to collapse
This is already known "bug", unfortunatelly, seems this bug exists on an original USA (6039S) firmware (or it can happens due
due to some incompatibility between 6039S and other 6039* models). The main idea is to waiting for next update 6.0.1 in USA and looks how this thing will works, if in next update this "bug" will be fixed - i will release an update of customized firmware.
Also, is there a way to add spanish back again?
Those 2 are minor issues anyway, thanks for giving people from outisde US MM
Click to expand...
Click to collapse
Yes, Spanish is missed according to my mistake In next release i will don't forget to add it in firmware. But can't promise a specific date of this release.

As I said, I am already extremly thanful that you made all of this possible. The spanish thing is a minor issue, I found an app that lets you add any language, system is still in englsih but it forces most apps to use the language you select.
And for the lockscreen, I am already using a third party one, so both problems are kinda solved for me.
Hopefuly we keep getting awesome stuff for our device from awesome people like you!

hi! i have installed it yesterday by your forum using google translate. by now, thank you!
so, if we have some atts our phone will get via OTA? (i think will not, but who knows )
see ya soon and thank u a lot

BernardoLopes said:
so, if we have some atts our phone will get via OTA? (i think will not, but who knows )
Click to expand...
Click to collapse
No, OTA updates will not work. Better initially turn off automatic updates to avoid any errors. OTA updates is fully functional on non-modified devices only. I mean - to work with OTA your phone must have all unmodified partitions, original recovery, etc. In this case, when you installed customized firmware - you'll have modified recovery partition (TWRP is installed) and modified system partition (firmware, as described above was customized to add additional languages), and, at last - you have other partitions from your device, not from original 6039S USA. This is the reason for which the OTA update will not work.
p.s. If USA verision will have major global updates - i will update this firmware too.

Thanks for a great rom. I have benen installed yesterday and everything is perfect.
I am using nova launcher and double tap screen work really very good.
I will waiting for a spanish language.
Good job, Decker.
Greatings from Madrid

dogman74 said:
I will waiting for a spanish language.
Click to expand...
Click to collapse
I will release firmware with Spanish language this week, wait plz. And now you can just type in dialer *#0034# to get some Spanish in interface. NB! This is activate spanish, but only for apps and menus that have spanish localization in resources.

DeckerSU said:
And now you can just type in dialer *#0034# to get some Spanish in interface. .
Click to expand...
Click to collapse
Done! and really works! You are great Decker, thanks!

Hi there!
I'd like to try this but I am wondering whether or not you could add support for dual sim devices.
I have 6039K bought in Italy.
Thanks

Mrsevic said:
I'd like to try this but I am wondering whether or not you could add support for dual sim devices.
Click to expand...
Click to collapse
Support of dual SIM can be added only after official release 6.0.1 for Dual SIM Idol 3 6039K in any region. As far as i know - 6.0.1 now exists only for one SIM phone. But you still could try this firmware. The only limitation - that your phone will see only one SIM card slot. And, of course, before flashing this TWRP backup is strongly recommended to backup your original firmware in TWRP.

So which SuperSu do you recommend to flash?
Update:
SuperSu 2.62 boots fine
Sent from my 6039S using Tapatalk

Which Version of SuperSu 2.62 boots fine? Can you upload the working SuperSu.zip?

Here
https://download.chainfire.eu/748/SuperSU/?
Even had an update to 2.65, just flashed exposed, boots fine, I'm gonna active 3 modules right now
Update: reboot without Issues, gravity box seems to work fine, I only touched the status bar settings to move the clock and hide some icons, other settings are yet to be seen
Enviado desde mi 6039S mediante Tapatalk

mibgo86 said:
Here
https://download.chainfire.eu/748/SuperSU/?
Even had an update to 2.65, just flashed exposed, boots fine, I'm gonna active 3 modules right now
Update: reboot without Issues, gravity box seems to work fine, I only touched the status bar settings to move the clock and hide some icons, other settings are yet to be seen
Enviado desde mi 6039S mediante Tapatalk
Click to expand...
Click to collapse
Can you check if navigation button mod works on gravity box please? I tried to bind long press recents to last app but couldn't get it to work. Status bar worked fine for me

Phantom410 said:
Can you check if navigation button mod works on gravity box please? I tried to bind long press recents to last app but couldn't get it to work. Status bar worked fine for me
Click to expand...
Click to collapse
No lo he probado, pero pareciera que por lo que me dices, las funciones alejadas de la experiencia stock de android no se aplican con gravity box, quise activar las funciones de reinicio avanzado desde gravity box y me las ignoro completamente.

DeckerSU said:
I will release firmware with Spanish language this week, wait plz. And now you can just type in dialer *#0034# to get some Spanish in interface. NB! This is activate spanish, but only for apps and menus that have spanish localization in resources.
Click to expand...
Click to collapse
don't forget italian, please! thanks.
I understand that your backup maintain the fastboot commands and 16GB of internal memory. is it right?
this is very important, because I don't want a MM with only 8GB and without fastboot commands.
Sent from my 6039Y using XDA-Developers mobile app

nantzen said:
I understand that your backup maintain the fastboot commands and 16GB of internal memory. is it right?
this is very important, because I don't want a MM with only 8GB and without fastboot commands.
Click to expand...
Click to collapse
Not quite. Firmware is partition-size independent. So, if you have only 8 Gb userdata partition - in Marshmallow you will obtain 8 Gb of internal memory. If you initially have 16 Gb device, or your device was already repartitioned - in MM you will have 16 Gb of memory. All needed manuals, i mean - how to do repartiton, or how to return working fastboot commands already exists on this forum. Read appropriate topics.

DeckerSU said:
Not quite. Firmware is partition-size independent. So, if you have only 8 Gb userdata partition - in Marshmallow you will obtain 8 Gb of internal memory. If you initially have 16 Gb device, or your device was already repartitioned - in MM you will have 16 Gb of memory. All needed manuals, i mean - how to do repartiton, or how to return working fastboot commands already exists on this forum. Read appropriate topics.
Click to expand...
Click to collapse
good! my 6039Y is already repartitioned, so I don't have to repartition again. Thanks!
what about "italian" version?
last question about the radio frequencies: did you left the american radio? or modified the radio for the european frequencies?

nantzen said:
last question about the radio frequencies: did you left the american radio? or modified the radio for the european frequencies?
Click to expand...
Click to collapse
Radio module (modem) is not included in this firmware backup. In other words - after flashing this fimrware you'll have your original radio from stock (or previous version of firmware). I.e. - nothing changed, you'll have same frequencies as on your previous firmware.

Custom ROM for Alcatel Idol 4S

Custom ROM for Alcatel Idol 4S (6071W/6077X)
The build of the OS:
10.0.15254.603 (FCU)
Firmware version:
1052.16.09031.50700 (6071W)
1052.16.10011.51400 (6077X)
All 68 Languages Interface and 102 Languages Keyboard Input.
Phone is unlocked.
Root enabled.
Added BDS Menu (PWR&VOL+).
Added Windows Phone Boot Menu (PWR).
Added ADC-files from IDOL4S PRO (6077X).
Added packages acer.Service.AcerSystemService, Nokia.Executable_OEMServiceHost.Generic, Nokia.Service_NdtkSvc.Generic.
Added packages MS_TSHELL.MSN.MainOS (bcdedit, cmd, reg and other).
Added packages Microsoft.MS_WEH_LEDALERT.MainOS.
Added packages Microsoft.Graphics.DXTools, Microsoft.Phone.Test.BaseOS.TraceLog, Microsoft.Tools.AppVerifExt, Microsoft.Tools.DevToolSupport, Microsoft.Tools.HITMemTools, Microsoft.Tools.PerfMonExt.
Added Enterprise and other ppkg.
Added App and Dependencies (Framework).
Some other tweaks and other minor changes.
Instruction:
Install Qualcomm drivers on your PC.
Install QFIL (QPST) on your PC.
Install custom ROM on your device in the mode 9008/EDL using QFIL (QPST).
Select Port - Qualcomm HS-USB QDLoader 9008,
Select Build Type - Flat Build,
Select Programmer - Idol4S_PRO_WIN_NPRG7627.bin,
Select Flat Build - Folder with files from archive Custom ROM,
Load XML - rawprogram0.xml,
Press Download,
Download Succeed,
Finish Download.
Press the power button and turn on the device.
Wait for the update process.
Download:
IDOL4S_6071W_F1052.16.09031.50700_10.0.15254.603_Custom
IDOL4S_6077X_F1052.16.10011.51400_10.0.15254.603_Custom
Custom W10M ROM:
Microsoft Lumia 950 XL (Dual SIM)
Alcatel Idol 4S (6071W/6077X)
Xiaomi MI4 LTE
Acer Liquid M330
Archos 50 Cesium
Archos 40 Cesium /
BLU WinJr / Karbonn Titanium Wind W4 /
K-Touch E8 Win / HighScreen WinWin
HighScreen WinJoy
BLU Win HD LTE

Thanks for sharing this. I currently use T-Mobile in the US. Have you tested the ROM with the T-Mobile carrier and do the added ADC files affect anything while using T-Mobile (VoLTE, HD Voice, etc)?
I have partially been following another forum that was working to boot loader unlock the Idol 4s for Windows 10 mobile. I don't think this ROM was a result of that, but do you know of any other news?

nate0 said:
I currently use T-Mobile in the US. Have you tested the ROM with the T-Mobile carrier and do the added ADC files affect anything while using T-Mobile (VoLTE, HD Voice, etc)?
Click to expand...
Click to collapse
No, I have not tested it. I have IDOL4S Open from Microsoft.

You can mention that there is a provxml file to install Yandex.Search.appxbundle in the IDOL4S_6071W_F1052.16.09031.50700_Open_RTM_10.0.15 254.490_Custom ROM. It is not in the T-Mobile ROM though.
This is a useful scenario too for some of us who might want to Edit the registry on the IDOL 4s outside of the current changes in these ROMs. Mount the bin file save the edits and flash the changes. Do you know if making changes such as reg edits would require an altered or updated rawprogram0.xml? Thanks.
---------- Post added at 10:56 PM ---------- Previous post was at 10:54 PM ----------
kovalDN said:
No, I have not tested it. I have IDOL4S Open from Microsoft.
Click to expand...
Click to collapse
Ok. I can test it later and if issues occur I could possibly change out those ADC files for the T-Mobile files.

nate0 said:
You can mention that there is a provxml file to install Yandex.Search.appxbundle in the IDOL4S_6071W_F1052.16.09031.50700_Open_RTM_10.0.15 254.490_Custom ROM. It is not in the T-Mobile ROM though.
Click to expand...
Click to collapse
The following My Account T-Mobile USA, Hulu Plus, Uber, Captain Fellcraft VR, and Zombie VR apps have been removed in ROM. Left other VR-applications, but with the possibility of removal. Added app Yandex.Search.
nate0 said:
This is a useful scenario too for some of us who might want to Edit the registry on the IDOL 4s outside of the current changes in these ROMs. Mount the bin file save the edits and flash the changes. Do you know if making changes such as reg edits would require an altered or updated rawprogram0.xml? Thanks.
Click to expand...
Click to collapse
I don't know what you're trying to say. The layout of the sections does not change, the size of the sections does not change. Why should change rawprogram0.xml. Data in rawprogram0.xml is taken from GPT, these are rawprogram0.xml is best for this ROM.
nate0 said:
Ok. I can test it later and if issues occur I could possibly change out those ADC files for the T-Mobile files.
Click to expand...
Click to collapse
Replacement ADC only in ROM F1052.16.09031.50700_Open_RTM. ROM F1050.14.08011.53400_TMOUS_Retail is initial, this replacement was not made.

kovalDN said:
The following My Account T-Mobile USA, Hulu Plus, Uber, Captain Fellcraft VR, and Zombie VR apps have been removed in ROM. Left other VR-applications, but with the possibility of removal. Added app Yandex.Search.
Click to expand...
Click to collapse
Ok Thanks.
kovalDN said:
I don't know what you're trying to say. The layout of the sections does not change, the size of the sections does not change. Why should change rawprogram0.xml. Data in rawprogram0.xml is taken from GPT, these are rawprogram0.xml is best for this ROM.
Click to expand...
Click to collapse
Sorry my fault. It has been a while since working with qc loaders and program xml files. For some reason I was thinking rawprogram0.xml contained the space used by the partitions not the whole partition size.
kovalDN said:
Replacement ADC only in ROM F1052.16.09031.50700_Open_RTM. ROM F1050.14.08011.53400_TMOUS_Retail is initial, this replacement was not made.
Click to expand...
Click to collapse
Thanks.

@kovalDN
I am having an issue on the custom ROMs being able to sign in with my Microsoft account while setting up the phone. It either locks up/freezes the set up process, or fails. I think it fails while checking account info and it never pulls the backups to restore. Ultimately the account will be signed in but can only move forward after skipping the step entirely to be able to set up the rest of the phone.
Is this just me or have you noticed an issue?

nate0 said:
@kovalDN
I am having an issue on the custom ROMs being able to sign in with my Microsoft account while setting up the phone. It either locks up/freezes the set up process, or fails. I think it fails while checking account info and it never pulls the backups to restore. Ultimately the account will be signed in but can only move forward after skipping the step entirely to be able to set up the rest of the phone.
Is this just me or have you noticed an issue?
Click to expand...
Click to collapse
It's not a bug, but a feature Only in custom ROM F1050.14.08011.53400_TMOUS_Retail. Associated with reset protection packets. They are in this firmware test. So it will be with the official ROM F1050.14.08011.53400_TMOUS_Retail, if you update it above 15063.2.

kovalDN said:
It's not a bug, but a feature Only in custom ROM F1050.14.08011.53400_TMOUS_Retail. Associated with reset protection packets. They are in this firmware test. So it will be with the official ROM F1050.14.08011.53400_TMOUS_Retail, if you update it above 15063.2.
Click to expand...
Click to collapse
What is being tested exactly?
I need to be able to restore a backup on the IDOL 4s. If I can't then certain apps don't function at all.

nate0 said:
What is being tested exactly?
Click to expand...
Click to collapse
Ask the Alcatel.
nate0 said:
I need to be able to restore a backup on the IDOL 4s. If I can't then certain apps don't function at all.
Click to expand...
Click to collapse
kovalDN said:
So it will be with the official ROM F1050.14.08011.53400_TMOUS_Retail, if you update it above 15063.2.
Click to expand...
Click to collapse
On the versions above 15063.2 reset protection is activated automatically by logging into your account, with no choice of disabling it. And in this firmware of packets of protection against reset in MainOS is not present.

kovalDN said:
Ask the Alcatel.
On the versions above 15063.2 reset protection is activated automatically by logging into your account, with no choice of disabling it. And in this firmware of packets of protection against reset in MainOS is not present.
Click to expand...
Click to collapse
Got it understood.
I am curious why are you using this older TMO firmware?

nate0 said:
I am curious why are you using this older TMO firmware?
Click to expand...
Click to collapse
I'm not using it I use F1052.16.09031.50700_Open_RTM.
kovalDN said:
ROM F1050.14.08011.53400_TMOUS_Retail is initial
Click to expand...
Click to collapse

kovalDN said:
I'm not using it I use F1052.16.09031.50700_Open_RTM.
Click to expand...
Click to collapse
I'm sorry I did not word that so you understood. I meant why is your custom ROM set as an older firmware? The fw revision of the T-Mobile firmware is older than the official production one on most phones. I am assuming you used this version to customize a ROM for some reason.

nate0 said:
I meant why is your custom ROM set as an older firmware? The fw revision of the T-Mobile firmware is older than the official production one on most phones. I am assuming you used this version to customize a ROM for some reason.
Click to expand...
Click to collapse
In the last official ROMs is there a BDS Menu and Mass Storage mode? The question is rhetorical

kovalDN said:
In the last official ROMs is there a BDS Menu and Mass Storage mode? The question is rhetorical
Click to expand...
Click to collapse
Well yes of course! One would have their work cut out for them if they did not have to manually build those items into a ROM on their own. Was hoping maybe you had plans to incorporate those items into an updated or different firmware if possible. One that would allow restoring of a backup, and had reset protections bugs fixed . No worries about that though, was only wishful thinking.

nate0 said:
Well yes of course! One would have their work cut out for them if they did not have to manually build those items into a ROM on their own. Was hoping maybe you had plans to incorporate those items into an updated or different firmware if possible. One that would allow restoring of a backup, and had reset protections bugs fixed . No worries about that though, was only wishful thinking.
Click to expand...
Click to collapse
This is already included in the custom ROM IDOL4S_6071W_F1052.16.09031.50700_Open_RTM_10.0.15254.490.

kovalDN said:
This is already included in the custom ROM IDOL4S_6071W_F1052.16.09031.50700_Open_RTM_10.0.15254.490.
Click to expand...
Click to collapse
Ok I will try it out again. I thought I tried to restore a backup on Both ROMs and failed to with the same bug.
For some reason on the Open market Custom ROM the ndtk packages are not active after flashed or not working. Maybe it is just me but I can't edit the registry, enable Interop services or full file system access from Interop Tools until I send the packages again even though they are there. Plus I have to make other changes to it as well for T-mobile nvi settings.

nate0 said:
I thought I tried to restore a backup on Both ROMs and failed to with the same bug.
Click to expand...
Click to collapse
The Open market Custom ROM should not have this error with backup recovery.
nate0 said:
For some reason on the Open market Custom ROM the ndtk packages are not active after flashed or not working. Maybe it is just me but I can't edit the registry, enable Interop services or full file system access from Interop Tools until I send the packages again even though they are there.
Click to expand...
Click to collapse
Again download a Open market Custom ROM, 16.07.2018 it was updated, this error was eliminated.

kovalDN said:
Again download a Open market Custom ROM, 16.07.2018 it was updated, this error was eliminated.
Click to expand...
Click to collapse
Ah ok that explains it. I had no idea you corrected this...

New Issues on Idol 4S using custom ROM
Installed TMOUS version of this custom ROM (Thank you OP for your efforts!) on August 8 and was delighted to uninstall the remaining VR apps. As nate0 posted earlier, I couldn't sign in during the initial setup, and was not able to restore earlier backups as expected. Phone is TMOUS retail locked (so far - longtime TMO customer awaiting billing cycles on this phone for unlock code).
Since then M$ has updated the OS build to 10.0.15254.527. Things keep breaking faster than I can keep track of - and not sure which are a function of 1) the custom ROM, 2) the Idol 4S, or 3) Microsoft desire to chase us away. New issues include:
Amazon - crashes at launch
Microsoft Wallet (v. 2.3.17311.0) - allowed me to scan 1 loyalty card successfully, then refuses to recognize/scan codes,
"CameraAccessDenied" error message
Flashlight (v. 4.0.0.0 Sakariya) - no longer can turn led on/off (Flashlight XT still works fine)
People (v. 10.2.2001.1000) - live tile stopped working after about a week, can't get it to work at all anymore
Translator (v. 4.8.7.0) - live tile works for about 1 day, then remove, disable/enable to restore function for another day
Microsoft Store - (v. 11807.1001.13.0) - live tile works for about 1 day, then same as Translator
My Library this morning shows about 1/3 of my apps that were listed last week ???

LineageOS 17.1 18.0 new builds

Initial topic - https://forum.xda-developers.com/lg-v40/development/android-10-0-0-lineageos-17-0-v40-t3970119
So far I am only doing compilation without testing the result.
Download:
LOS-17.1
Latest build: lineage-17.1-20200304-UNOFFICIAL-judypn
lineage-17.1-20210304-UNOFFICIAL-judypn.zip
drive.google.com
Prev.:lineage-17.1-20201118-UNOFFICIAL-judypn
https://drive.google.com/drive/folders/1QT_yRNtydEZmplZvl5oSq1xiySv53NK9?usp=sharing
LOS-18.0
Latest build: lineage-18.0-20201126-UNOFFICIAL-judypn
https://drive.google.com/drive/folders/17d7f1QdUoljNnU00VRJYC776KhAwIq4R?usp=sharing
Contributors
xenius9, SGCMarkus
Many thanks to SGCMarkus for the sources.

xenius9 said:
Initial topic - https://forum.xda-developers.com/lg-v40/development/android-10-0-0-lineageos-17-0-v40-t3970119
So far I am only doing compilation without testing the result.
Click to expand...
Click to collapse
Is LOS 18.0 "Pre Alpha or Alpha" suitable for daily use?
Haven't noticed exact description what works and what are the current bugs.....

xenius9 said:
Initial topic - https://forum.xda-developers.com/lg-v40/development/android-10-0-0-lineageos-17-0-v40-t3970119
So far I am only doing compilation without testing the result.
Download:
LOS-17.1
Latest build: lineage-17.1-20201118-UNOFFICIAL-judypn
https://drive.google.com/drive/folders/1QT_yRNtydEZmplZvl5oSq1xiySv53NK9?usp=sharing
LOS-18.0
Latest build: lineage-18.0-20201126-UNOFFICIAL-judypn
https://drive.google.com/drive/folders/17d7f1QdUoljNnU00VRJYC776KhAwIq4R?usp=sharing
Contributors
xenius9, SGCMarkus
Many thanks to SGCMarkus for the sources.
Click to expand...
Click to collapse
Do you think most of the bugs will be cleared out by the end of the year? Also, which kdz should I use if I want band 71 support?

camray00 said:
Do you think most of the bugs will be cleared out by the end of the year? Also, which kdz should I use if I want band 71 support?
Click to expand...
Click to collapse
I don't know anything about the bugs, but for b71 2 of the roms have it; US OP Pie (no Q yet) and KR OP which is Korean Open (Q version available) has b71 also.
cheers

AsItLies said:
I don't know anything about the bugs, but for b71 2 of the roms have it; US OP Pie (no Q yet) and KR OP which is Korean Open (Q version available) has b71 also.
cheers
Click to expand...
Click to collapse
I was thinking it might be possible to grab the modem partition from sprint or unlocked pie and write them over before installing this ROM. Would that work, or would it be incompatible?

camray00 said:
I was thinking it might be possible to grab the modem partition from sprint or unlocked pie and write them over before installing this ROM. Would that work, or would it be incompatible?
Click to expand...
Click to collapse
I'm not sure, have not tried that. I've read others suggesting the same thing but don't know if they've had success with it. I'd bet it wouldn't as there are so many threads, in various model phones, about which rom supports which bands. If that problem could be resolved by simply using the modem partition from a diff rom, it happening would almost certainly be common knowledge and many threads with various modem partitions available, but there aren't.

AsItLies said:
I'm not sure, have not tried that. I've read others suggesting the same thing but don't know if they've had success with it. I'd bet it wouldn't as there are so many threads, in various model phones, about which rom supports which bands. If that problem could be resolved by simply using the modem partition from a diff rom, it happening would almost certainly be common knowledge and many threads with various modem partitions available, but there aren't.
Click to expand...
Click to collapse
Ended up trying it and it prevents boot to system and recovery. I replaced all 4. modemst1,modemst2,modem_a,modem_b
I think we'll have to wait for them to make Q for v405qa unlocked.
I used v405ebw with lineage 18. VoLTE and VoWiFi aren't supported, which basically makes Mint Mobile unusable except for data.

camray00 said:
Ended up trying it and it prevents boot to system and recovery. I replaced all 4. modemst1,modemst2,modem_a,modem_b
I think we'll have to wait for them to make Q for v405qa unlocked.
I used v405ebw with lineage 18. VoLTE and VoWiFi aren't supported, which basically makes Mint Mobile unusable except for data.
Click to expand...
Click to collapse
I'd suggest another option, as 405qa Q arrival is ???, use the korean open 30e. That's what I have. One mod makes it quite workable; copy the US Open /OP partition (from Pie) and use it instead of the KR Open partition. Everything works, including vowifi and volte. And it does get b71. There's only 1 other small change needed to get vowifi to work.
It's very solid and haven't had any trouble with it at all. Something to consider.

I just found out that a great deal of work can be done with Cellular Support via the Qualcomm PDC tool.
AsItLies said:
I'd suggest another option, as 405qa Q arrival is ???, use the korean open 30e. That's what I have. One mod makes it quite workable; copy the US Open /OP partition (from Pie) and use it instead of the KR Open partition. Everything works, including vowifi and volte. And it does get b71. There's only 1 other small change needed to get vowifi to work.
It's very solid and haven't had any trouble with it at all. Something to consider.
Click to expand...
Click to collapse
Can you link the Korean open download? Also, what is the small change for VoWiFi?

Yes it's on this link. It's at the top of the list, the KR Open, 30e is the last one in the beginning section.
The other change is minor, have to enter the service menu with the dial code and it's one of the SVC (iirc) fields you have to enable vowifi. I can find it if you decide to do it.
There's a little 'trick' u need to do when cross flashing, to avoid the 'NT_Error' thing when u first boot up. It doesn't cause a problem, it's just annoying. Just after doing a partition DL of the rom, let it boot of course, to finish. Then shut it off, don't touch anything. Then use LG up and do a refurbish with same rom. No more nt-error code thing.
Also, even though the firmware page (above) doesn't indicate it, that rom does have b71. I have a screen shot of the phone using lte discovery connected to b71 on that rom. It's there.

AsItLies said:
Also, even though the firmware page (above) doesn't indicate it, that rom does have b71. I have a screen shot of the phone using lte discovery connected to b71 on that rom. It's there.
Click to expand...
Click to collapse
I'm trying to boot TWRP. When I run
Code:
fastboot boot judypn_TWRP_bootable-metadata.img
it reads out this:
Code:
downloading 'boot.img'...
OKAY [ 0.942s]
booting...
FAILED (remote: unknown command)
finished. total time: 0.946s
This is after flashing the Korean Open version. I'm not sure what to do. I made sure USB Debugging was on and changed the driver to the official LGE one, but no luck.

I tried everything on google. Still no luck.

camray00 said:
I tried everything on google. Still no luck.
Click to expand...
Click to collapse
Hi, so we've hijacked this thread long enough, let's move this over to this thread which is kor open specific.
Sorry about the hijack xenius.

Please help me. My LG v40ua is switched into los-18.0 and recovery is also los-18.0. Now I want to change back to the previous system, but I can't do it without root. Please tell me what to do, thank you
And my phone can't enter FastBoot mode

xenius9 said:
Initial topic - https://forum.xda-developers.com/lg-v40/development/android-10-0-0-lineageos-17-0-v40-t3970119
So far I am only doing compilation without testing the result.
Download:
LOS-17.1
Latest build: lineage-17.1-20201118-UNOFFICIAL-judypn
https://drive.google.com/drive/folders/1QT_yRNtydEZmplZvl5oSq1xiySv53NK9?usp=sharing
LOS-18.0
Latest build: lineage-18.0-20201126-UNOFFICIAL-judypn
https://drive.google.com/drive/folders/17d7f1QdUoljNnU00VRJYC776KhAwIq4R?usp=sharing
Contributors
xenius9, SGCMarkus
Many thanks to SGCMarkus for the sources.
Click to expand...
Click to collapse
Thank you for your work, @xenius9 - спасибо большое. Using lineage-17.1-20201118-UNOFFICIAL-judypn on Sprint LM-V405UA for about a month without problems.

praiseeee said:
Please help me. My LG v40ua is switched into los-18.0 and recovery is also los-18.0. Now I want to change back to the previous system, but I can't do it without root. Please tell me what to do, thank you
And my phone can't enter FastBoot mode
Click to expand...
Click to collapse
You should get fastboot working via 9008 guide (I suggest not to wipe lafs on both slots), then fastboot TWRP.

praiseeee said:
Please help me. My LG v40ua is switched into los-18.0 and recovery is also los-18.0. Now I want to change back to the previous system, but I can't do it without root. Please tell me what to do, thank you
And my phone can't enter FastBoot mode
Click to expand...
Click to collapse
If you install this apk (only on los), it will allow you to switch to the other side and reboot recovery. It's hard coded (I changed the original file) to boot to recovery after you select the other slot. Did it for the exact situation you're experiencing.
cheers

LOS 17.1 updated

xenius9 said:
LOS 17.1 updated
Click to expand...
Click to collapse
Is it stable? Good for daily driver? Thanks!

Hello forum!
I have LG LM-V405QA and would like to have a ROM flashed that removes all Google everything. I have flashed ROMs in the past, but have already spent too much time researching with no results. I am in California, USA.
This is a serious inquiry. Please help.
Thank you.

S20 FE missing AOD transition animation between AOD and lock screen

Has anyone else noticed this?
I'm on the XSA CSC running December security patch (OneUI 2.5) and it does not have the animation. I've also received reports that OneUI 3.0 still doesn't have the animation for some reason (from Reddit), and it seems like a strange omission to me considering the phone has the specs to be more than capable of it. If you are not sure what I mean, check this video:
https://www.reddit.com/r/galaxys10/comments/dz36e8
(screen recording taken from Galaxy S10 on OneUI 2.0)
Thanks

Is it a bug or did they decide just not to have it?

I'm using the OneUI 3.0 and don't have the animations... Samsung is kidding us with the S20 FE?

mxxcon said:
Is it a bug or did they decide just not to have it?
Click to expand...
Click to collapse
Seems like a bug to me, it doesn't make sense that they would choose not to include it as it's a fairly small thing and a whole range of devices have it including the "budget" S10e from last year.

FedoraMaster420 said:
Has anyone else noticed this?
I'm on the XSA CSC running December security patch (OneUI 2.5) and it does not have the animation. I've also received reports that OneUI 3.0 still doesn't have the animation for some reason (from Reddit), and it seems like a strange omission to me considering the phone has the specs to be more than capable of it. If you are not sure what I mean, check this video:
https://www.reddit.com/r/galaxys10/comments/dz36e8
(screen recording taken from Galaxy S10 on OneUI 2.0)
Thanks
Click to expand...
Click to collapse
Thats exacly my problem too. I don't think this is a bug, because it's very noticable... this was a problem in 2.5, And I am in one ui 3, and this is Still a problem.... I don't understand samsung....

Nothing new, Samsung has removed it from a couple of "lite" (or in this case, FE) variants. It can be added with root by editing a file in vendor called floating feature. Doubt Samsung would re-add it, but who knows.
Btw, I'm talking about the Note 10 Lite, it doesn't have it by default either.

ShaDisNX255 said:
Nothing new, Samsung has removed it from a couple of "lite" (or in this case, FE) variants. It can be added with root by editing a file in vendor called floating feature. Doubt Samsung would re-add it, but who knows.
Btw, I'm talking about the Note 10 Lite, it doesn't have it by default either.
Click to expand...
Click to collapse
What line would I need to add/edit? This will be good to know if I ever decide to root.

FedoraMaster420 said:
What line would I need to add/edit? This will be good to know if I ever decide to root.
Click to expand...
Click to collapse
I made my own little tutorial here: https://forum.xda-developers.com/t/samsung-galaxy-a71-working-mods.4173295/
But to jump straight into this edit in question, it's the following:
The floating_features.xml file in question can be located in system(root)/vendor/etc
Add AOD to lockscreen clock animation:
Note: This only works on OneUI 2.5, does not work on OneUI 2.1 and below for A71.
Search for the following line in floating_features:
Code:
<SEC_FLOATING_FEATURE_FRAMEWORK_CONFIG_AOD_ITEM>
Add clocktransition in this line, like this:
<SEC_FLOATING_FEATURE_FRAMEWORK_CONFIG_AOD_ITEM>aodversion=7,clearcoveroff,clocktransition</SEC_FLOATING_FEATURE_FRAMEWORK_CONFIG_AOD_ITEM>
Save and reboot. Done, there will be an added animation from AOD to lockscreen clock.

ShaDisNX255 said:
I made my own little tutorial here: https://forum.xda-developers.com/t/samsung-galaxy-a71-working-mods.4173295/
But to jump straight into this edit in question, it's the following:
The floating_features.xml file in question can be located in system(root)/vendor/etc
Add AOD to lockscreen clock animation:
Note: This only works on OneUI 2.5, does not work on OneUI 2.1 and below for A71.
Search for the following line in floating_features:
Code:
<SEC_FLOATING_FEATURE_FRAMEWORK_CONFIG_AOD_ITEM>
Add clocktransition in this line, like this:
<SEC_FLOATING_FEATURE_FRAMEWORK_CONFIG_AOD_ITEM>aodversion=7,clearcoveroff,clocktransition</SEC_FLOATING_FEATURE_FRAMEWORK_CONFIG_AOD_ITEM>
Save and reboot. Done, there will be an added animation from AOD to lockscreen clock.
Click to expand...
Click to collapse
Nice thank you heaps for this!!! I'm just curious, is there any way to edit this file without root and retain Knox 0x0? I suppose not since it's a file located in vendor, but can't hurt to ask!

FedoraMaster420 said:
Nice thank you heaps for this!!! I'm just curious, is there any way to edit this file without root and retain Knox 0x0? I suppose not since it's a file located in vendor, but can't hurt to ask!
Click to expand...
Click to collapse
I've looked but so far I haven't seen that it's possible. Mainly because you can't mount system/vendor as read-write without root, even with adb. I personally don't know of a way.

ShaDisNX255 said:
I've looked but so far I haven't seen that it's possible. Mainly because you can't mount system/vendor as read-write without root, even with adb. I personally don't know of a way.
Click to expand...
Click to collapse
hi, i did everything you wrote, but i can't save the floating feature xml on my phone. I tried to edit it on my PC, but then when i pasted it to the correct folder replacing the old one, it just magically recovered to it's old version, not including my edited lines, without any error message... What can i do?

davie0430 said:
hi, i did everything you wrote, but i can't save the floating feature xml on my phone. I tried to edit it on my PC, but then when i pasted it to the correct folder replacing the old one, it just magically recovered to it's old version, not including my edited lines, without any error message... What can i do?
Click to expand...
Click to collapse
Oh, i'm using Root Browser, and when i tried to save the edit on that, It said "Error saving edit" or something like that... do i need a permission of some kind?

sorry for spamming. I found out the problem. I didn't know what rooting the phone is. Now i know, and im not in that level to take care of a rooted phone, I just wanted a cool animation

ShaDisNX255 said:
I've looked but so far I haven't seen that it's possible. Mainly because you can't mount system/vendor as read-write without root, even with adb. I personally don't know of a way.
Click to expand...
Click to collapse
Hi, I just had a thought come to me, would it be possible to modify the stock firmware file that is flashed in Odin (the AP .tar file) with the edited version of floating_feature.xml, stored in vendor.img? Would this flash successfully and maintain Knox 0x0? Or would it see the slightly modified AP file as a custom binary and thus void Knox?

FedoraMaster420 said:
Hi, I just had a thought come to me, would it be possible to modify the stock firmware file that is flashed in Odin (the AP .tar file) with the edited version of floating_feature.xml, stored in vendor.img? Would this flash successfully and maintain Knox 0x0? Or would it see the slightly modified AP file as a custom binary and thus void Knox?
Click to expand...
Click to collapse
Your second assessment is correct, just unpacking and repacking AP detects it as custom firmware and therefore would trip Knox.

This is a very weird thing in the sense that a Galaxy M31 (which is a very low-mid range phone) has that animation enabled and also it runs OneUI Core

gj4560 said:
Has anyone else noticed this?
I'm on the XSA CSC running December security patch (OneUI 2.5) and it does not have the animation. I've also received reports that OneUI 3.0 still doesn't have the animation for some reason (from Reddit), and it seems like a strange omission to me considering the phone has the specs to be more than capable of it. If you are not sure what I mean, check this video:
https://www.reddit.com/r/galaxys10/comments/dz36e8
(screen recording taken from Galaxy S10 on OneUI 2.0)
Thanks
Click to expand...
Click to collapse
123

Android 12 personal build

If somebody wanna to try my personal build of phh treble A12 with 01/05/22 security patch let me know and we figure out how to share. Keep in mind I don’t use Telegram .
Some info:
it's made with mind for regular use of device as phone not fancy or gaming machine.
Sms,calls,voip calls,navigation priority for me.Very slim rom!
I’m not put here some warning – you already understand all risk when using custom roms! Right? If not what are you doing here!
In short - phh aosp gsi and all credits to him and team.
Tested and adjusted for Nord10 5G BE86AA ATT provider, vendors 11.02 and 11.03, not rooted unlocked bootloaders.
Runs already w/o trouble over 2 mnts on 2 phones.
English only (no localization), diff keyboard layouts works,su, rw system, MicroG with sig spoofing, bromite webview,patched Captive portal (read here),
Cloudflare dns,dev option enabled, soft display option.
Removed useless overlays for phone, fixed voip call sound,ims, prefered network 5G enable, media sound over BT works.
Voip calls tested on Signal,Wire and WhatsUp with domestic and oversea calls.
My bank app working fine,gMaps works (but I’m using Magic Earth),fingerprint,otg-usb,Bluetooth in 2 cars,bluetooth to my pc.
I left pph treble app in case.
Many small changes, some hard coded some in build.props
I don’t use any google stuff or g Pay ,Amazon pay or any other pays so don’t know would it work or not. If you need it get something like pe and enjoy google+aftermarket s**t.
Only Foss apps
You need Calendar,Calculator,Messenger if you don’t like Signal (preinstalled) and good Music app.
I’m personally using Signal,Wire and Element, my wife Signal,Whatsup,security camera apps w/o trouble. Some apks not upstream versions.
I'm old school Linux guy - don't fix if it works is my philosophy. But on rw system you easily can rm and install what ever you like or update from Fdroid.

Interested

freemn61 said:
Interested
Click to expand...
Click to collapse

check pm

boom15 said:
If somebody wanna to try my personal build of phh treble A12 with 01/05/22 security patch let me know and we figure out how to share. Keep in mind I don’t use Telegram .
Some info:
it's made with mind for regular use of device as phone not fancy or gaming machine.
Sms,calls,voip calls,navigation priority for me.Very slim rom!
I’m not put here some warning – you already understand all risk when using custom roms! Right? If not what are you doing here!
In short - phh aosp gsi and all credits to him and team.
Tested and adjusted for Nord10 5G BE86AA ATT provider, vendors 11.02 and 11.03, not rooted unlocked bootloaders.
Runs already w/o trouble over 2 mnts on 2 phones.
English only (no localization), diff keyboard layouts works,su, rw system, MicroG with sig spoofing, bromite webview,patched Captive portal (read here),
Cloudflare dns,dev option enabled, soft display option.
Removed useless overlays for phone, fixed voip call sound,ims, prefered network 5G enable, media sound over BT works.
Voip calls tested on Signal,Wire and WhatsUp with domestic and oversea calls.
My bank app working fine,gMaps works (but I’m using Magic Earth),fingerprint,otg-usb,Bluetooth in 2 cars,bluetooth to my pc.
I left pph treble app in case.
Many small changes, some hard coded some in build.props
I don’t use any google stuff or g Pay ,Amazon pay or any other pays so don’t know would it work or not. If you need it get something like pe and enjoy google+aftermarket s**t.
Only Foss apps
You need Calendar,Calculator,Messenger if you don’t like Signal (preinstalled) and good Music app.
I’m personally using Signal,Wire and Element, my wife Signal,Whatsup,security camera apps w/o trouble. Some apks not upstream versions.
I'm old school Linux guy - don't fix if it works is my philosophy. But on rw system you easily can rm and install what ever you like or update from Fdroid.
Click to expand...
Click to collapse
Very nice! Nice to know android 12 is working on our devices. I will be waiting for release from you once it's ready

hmmm It sounds good

Thank you guys! But I'm not developer and not planing to do some releases here. If you not afraid to try and use it I can drop you link from my cloud. And of course welcome your opinion and advice after.

boom15 said:
Thank you guys! But I'm not developer and not planing to do some releases here. If you not afraid to try and use it I can drop you link from my cloud. And of course welcome your opinion and advice after.
Click to expand...
Click to collapse
I work with GSI installer here:
[BILLIE] [FASTBOOT] GSI Installer
GOOD DAY XDA'S FINEST! I recently got interested in the Generic System Image posts you guys were making, well honestly I wanted to make a script to restore my phone Mauronofrio style! It's uploaded to SourceForge and working pretty nicely. I...
forum.xda-developers.com
For now i have Pixel Experience A12 and im happy
This rom work like charm, bu NFC dont work and i cant root it now....

umaga2012 said:
im interested
Click to expand...
Click to collapse
where to send link?

boom15 said:
where to send link?
Click to expand...
Click to collapse
Email address?

umaga2012 said:
Email address?
Click to expand...
Click to collapse
It's up-to you. You can check it in pm.
Sorry for being late,just came from work

Fedon said:
I work with GSI installer here:
[BILLIE] [FASTBOOT] GSI Installer
GOOD DAY XDA'S FINEST! I recently got interested in the Generic System Image posts you guys were making, well honestly I wanted to make a script to restore my phone Mauronofrio style! It's uploaded to SourceForge and working pretty nicely. I...
forum.xda-developers.com
For now i have Pixel Experience A12 and im happy
This rom work like charm, bu NFC dont work and i cant root it now....
Click to expand...
Click to collapse
Magisk 24 is now out with beta support for android 12

Fedon said:
I work with GSI installer here:
[BILLIE] [FASTBOOT] GSI Installer
GOOD DAY XDA'S FINEST! I recently got interested in the Generic System Image posts you guys were making, well honestly I wanted to make a script to restore my phone Mauronofrio style! It's uploaded to SourceForge and working pretty nicely. I...
forum.xda-developers.com
For now i have Pixel Experience A12 and im happy
This rom work like charm, bu NFC dont work and i cant root it now....
Click to expand...
Click to collapse
How did you install it?

umaga2012 said:
How did you install it?
Click to expand...
Click to collapse
Its only for OnePlus Nord N10 5G (BE2026/BE2029 - codename - billie)
download SYSTEM IMG and copy img to folder GSI-FLASHER and rename it to
system.img, then fastboot and run flash-device.bat (need unlocked bootloader of course)

Fedon said:
Its only for OnePlus Nord N10 5G (BE2026/BE2029 - codename - billie)
download SYSTEM IMG and copy img to folder GSI-FLASHER and rename it to
system.img, then fastboot and run flash-device.bat (need unlocked bootloader of course)
Click to expand...
Click to collapse
I'm sorry I am really confused about the right method coming from a samsung device where the procedure was quite different. Dont I need vbmeta.img or something? Inside the file the installation method is as below:
unlock bootloader,no root needed.
Tested on android 11.02/11.03 vendor, not sure about 10
RW version.
from terminal:
adb reboot bootloader
fastboot reboot fastboot
fastboot flash system nord-S-RW.img
fastboot -w
fastboot reboot
Enjoy!
Some times take upto 5 min to boot,
if not try restart again
Which method do I use?

umaga2012 said:
I'm sorry I am really confused about the right method coming from a samsung device where the procedure was quite different. Dont I need vbmeta.img or something? Inside the file the installation method is as below:
unlock bootloader,no root needed.
Tested on android 11.02/11.03 vendor, not sure about 10
RW version.
from terminal:
adb reboot bootloader
fastboot reboot fastboot
fastboot flash system nord-S-RW.img
fastboot -w
fastboot reboot
Enjoy!
Some times take upto 5 min to boot,
if not try restart again
Which method do I use?
Click to expand...
Click to collapse
If you have BE2026/BE2029 then all is inside my zip....
Only copy system.img into GSI-FLASHER and start flash-device.bat
(with unlocked bootloader and phone booted in fastboot - volume down + up + power)
thats all

Fedon said:
If you have BE2026/BE2029 then all is inside my zip....
Only copy system.img into GSI-FLASHER and start flash-device.bat
(with unlocked bootloader and phone booted in fastboot - volume down + up + power)
thats all
Click to expand...
Click to collapse
Thanks. Won't work on my device though. Mine is BE2025

umaga2012 said:
Thanks. Won't work on my device though. Mine is BE2025
Click to expand...
Click to collapse
it can work... you can try it... ( i try BE2026 rom on BE2029 and work like charm)
If no, you can always flash oxygen via EDL .
But i mean it can work

Develop Bugs

welcome