Hi,
I would like to know where is located the HTC animated logo which is included into the Wm6 from HTC ?
i changed the "primary splash" and "secondary splash" NB files by mine but this HTC animated splash/logo while booting is still visible.
Please, could you tell me how to remove it ?
thanks a lot,
M.
Your best bet would be to install a ROM that just doesn't include it.
If you're happy making your own ROM using Pandora, you can just not tick the box for animated startup on the list of items to include. See Pandora thread for this. http://forum.xda-developers.com/showthread.php?t=316881
If you don't want to do a DIY ROM yet, just browse through the current WM6 cooked ROM threads and find the one that most closely matches the setup you'd like and doesn't include animated startup.
There may be some way to disable it during the startup process if it's already part of your ROM but I doubt it.
but unfortunately, all WM6 ROM i found are with this HTC animated splashscreen :-(
I think that is the problem.
The animated screen will remain until you overwrite it. Most Roms do not include one and so do not overwrite it.
If you have tried changing the splash screens yourself then i am not sure what is going wrong - did you follow the guides completely?
Yes i did...once i flash, my splashscreens aredisplayed (primary and secondary) but the animated HTC logo is still there.
once i flash it into another hermes 100, my splashscreens are not displayed :-(
i'm completly lost now... :-(
anyway the animated HTC logo is still displayed :-(
help me plz.
Taken from the WIKI:
Disable Startup Animation [HTC-Logo]
Who wants to remove and install another splash screen (different from the one provided with Schap's ROM) REMEMBER to disable the original Htc splash screen by editing the registry (e.g. with 'Resco Explorer') in this way:
To disable the startup animation change the following registry value:
HKEY_LOCAL_MACHINE\Software\HTC\StartupAnimation\Enabled = 1
Well, you only have to swap 1 with 0 and the splash screen is disabled! So after that, the reg. value will be this:
HKEY_LOCAL_MACHINE\Software\HTC\StartupAnimation\Enabled = 0
I flashed my C720W with S620 and Roger's English ROM which built in with XT9. I manage to install Chinese font to view webpages and messages with Chinese. However I did not find a good way to input Chinese. All I need is a STROKE IME for Traditional Chinese.
1) I cannot found Xt9 Chinese
2) I tried to extract some files from the asia ROM for Keytouch IME, but failed to manage the registry setting and cannot make it work.
3) I tried to install CE-Star Smartphone 2.8, it does not work!!
4) I tried to install Plum IME (PlumSIP5_SP1), I can type Chinese with the number keys, but the key mapping is not for my QWERT keyboard.
Anyone have a solution?
CE-Sta smartphone 2.8 is the only choice.
seu2002,
which ce-star version? i installed the trial from splife.com. i see the chinese letter "centre" on the bar, but i don't know how to change the ime.
I cannot switch to Chinese IME in CE-star. When I press FN-SPACE, it still pops up the XT9 IME menu. There is no option for a Chinese IME.
the newest version, that it 2.8R3a.
hold Fn when u press space to change between system T9 and CE-Star,
hold(long press) Fn to call the menu.
anything u don't understand, u can reply or PM me glad to find someone here who use chinese
when i press Fn+Space, it pops up the usual XT9 menu (small as the one before i install CE-star). the menu shows
1 XT9 English
2 ABC
3 Language ->
-> 1 French
-> 2 English
4 About XT9
I am using Roger's ROM.
sagementor said:
when i press Fn+Space, it pops up the usual XT9 menu (small as the one before i install CE-star). the menu shows
1 XT9 English
2 ABC
3 Language ->
-> 1 French
-> 2 English
4 About XT9
I am using Roger's ROM.
Click to expand...
Click to collapse
I'v no idea which version do u use, I recommend u test the latest version of ce-star which u can find on their website http://www.mobem.com
good luck
i cold-booted my phone, and installed the version downloaded from http://www.mobem.com. now i can read and type chinese. i think the chinese pack i was using is not compatiable with ce-star. anyway...
but now i have another problem. the ce-star works well after i freshly installed it. after a few restart, it creates a problem. i cannot read any SMS and email, the screen turns blank, and i cannot even type a new message. i am pretty sure it is caused by ce-star. my phone goes back to normal after i uninstall the ce-star. there is a post in another forum talking about the same problem.
http://www.pumb.org/viewthread.php?tid=31898&page=52#pid453639
have you got this experience? how did you solve it?
thank you!
sagementor said:
i cold-booted my phone, and installed the version downloaded from http://www.mobem.com. now i can read and type chinese. i think the chinese pack i was using is not compatiable with ce-star. anyway...
but now i have another problem. the ce-star works well after i freshly installed it. after a few restart, it creates a problem. i cannot read any SMS and email, the screen turns blank, and i cannot even type a new message. i am pretty sure it is caused by ce-star. my phone goes back to normal after i uninstall the ce-star. there is a post in another forum talking about the same problem.
http://www.pumb.org/viewthread.php?tid=31898&page=52#pid453639
have you got this experience? how did you solve it?
thank you!
Click to expand...
Click to collapse
Frankly speaking, ce-star is not that perfect, it has some annoying bugs
According to my experience, if u run some new soft or go to some menu that u haven't been to before, catastrophe may occur, which means ur device just freeze. Acctually, u needn't uninstall it, just reboot, if there is no response, just pull out battery and boot. Don't worry, it's OK. It'll be fine after u done this for some times
btw, I feel angry for paying $25 for that ****!!!
If I could buy a new device, I definitely will choose a PPC released in asia so as to get rid of that **** forever!!!
actually my phone was bought in HK with a Chinese ROM, I just wanted to upgraded it to WM6.
for the CE-Star, I solved the problem by removing the DynaNls.lnk from \windows\startup" folder, then manually run the CE-Star program.
Hi,mate. My phone is also come from HK with CSL 1010 brand
I have tried ur method before, it cannot get rid of the freeze bug. Just wait, it will happen some days later
Maybe tomorrow, who knows
MOD EDIT: Please use English as per rule 4. Google translate can help.
Code:
Try doing a clean install. I made it yesterday and I solved little problems similar to yours that had long been suffering.
Sent from the bottom with Antonio
Prueba a hacer una instalación limpia. Yo la hice ayer y se me solucionaron problemillas parecidos al tuyo que llevaba tiempo sufriendo.
Enviado desde el fondo del mar con Antonio
I've read Schap's tutorial:
http://forum.xda-developers.com/showthread.php?p=1292350&highlight=resource#post1292350
Then i've installed Action Screen from HTC Touch Dual.
Well if i start app after installation, i don't see any message on top of action screen.
If make a new file HTCActionScreen.exe.0410.mui by copying HTCActionScreen.exe.0409.mui (my OS is in italian), i can see on the top: "Dial phone number or select a task below:"
So, i've downloaded resource hacker changed the string (only the string not string code!) in italian and saved into a new file called HTCActionScreen.exe.0410.mui, but nothing happens.
Why?
Wich is my fault?
Thanks for help
I using EnviroROM[V4] Rom and cant change the complete language of the phone!
This are my steps I've done:
1. Changed language in SystemSettings > Language & input to English (UK)
2. Reboot and wiped cache
After step1 the main ui was in english but all apps and buttons in the app drawer (the screen with the apps) were russian like before.
after rebooting (step2) the apps-names were in english but the buttons were still in russian.
I found a thread about changing a few variables in the rom before flashing but I dont know how to do this.
Can anybody plz help!!!??
P.S.: I think this guy has the same issue: http://forum.xda-developers.com/showpost.php?p=42652574&postcount=154
Also it changes the App-Name language at some point ? I dont have any clue when or why...
My wife just recently bought an LG G3. When she changed the GUI language to Japanese, she noticed that there are a lot of text inconsistencies as she goes through the menus. The phone isn't malfunctioning, but a lot of the characters are either incorrect or Chinese. Can anyone direct me to a file or something that will allow me to change this safely possibly without rooting her phone?
Not possible without rooting as you are not able to access system partition.
Maybe to use english?
Ok then I'm ready to root could you please post a link to the best instructions and ROM that I could use?
bump
I had the same problem, or close to it!!
After i upgade to lollipop i choose english as gui language and then after setting few settings on the startup wizard the language changed to arabic, and i went back to the beginning of the wizard and scroll up and down and set it to english again and it was fine till the wizard finished then i noticed LG smart world app is in arabic and the privacy agreement too. And i couldn't change that!!