Download Odin v3.13.3
https://dl2018.sammobile.com/Odin3-v3.13.3.zip
Extract the firmware file you just downloaded. You should get 5 files:
AP (System &Recovery)
BL (Bootloader)
CP (Modem / Radio)
CSC_*** (Country / Region / Operator)
HOME_CSC_*** (Country / Region / Operator)
Add each file to it's respective field in Odin v3.13.3. Use CSC_*** if you want to do a clean flash or HOME_CSC_*** if you want to keep your apps and data.
Reboot your phone in Download / Odin mode (make sure your device is off) with the following button combo: POWER + VOLUME DOWN + BIXBY
Other options in case first option did not work or isn't possible.
Option 2 VOLUME DOWN + VOLUME UP than USB cable
Option 3 POWER + VOLUME DOWN + VOLUME UP
Option 4 POWER + VOLUME DOWN + HOME BUTTON
Option 5 (Note9) USB cable + VOLUME DOWN + BIXBY
Once in download mode, connect your phone to the PC, preferably using the original USB cable you got with your phone. Odin should detect your device and a BLUE box will show up with the COM port number. (Be sure, the SAMSUNG-drivers are installed on your PC!)
Do NOT tick any extra boxes. The only options to be ticked are F.Reset Time and Auto-Reboot.
Click the start button, wait for Odin to say 'PASS' in a GREEN box. Once the flash is complete, your phone will reboot, and you can disconnect your phone from the PC.
Download the Samsung firmware for the Galaxy Note 10+ SM-N975F with product code MID from Iraq. This firmware has version number PDA N975FXXU1ASH5 and CSC N975FOXM1ASH5. The operating system of this firmware is Android 9 , with build date Fri, 09 Aug 2019 07:17:48 +0000. Security patch date is 2019-08-01, with changelist 16618471.
https://mega.nz/#!sgM2QIYQ!kt02nPuMbz9baO_VjzjdKkXRdRw6fMfVlo0dT2z5bdQ
None of the Download options worked for me.
I booted in Recovery using the Volume up key and then selected reboot to bootloader.
Even the Note 9 method didn't work!
JazonX said:
None of the Download options worked for me.
I booted in Recovery using the Volume up key and then selected reboot to bootloader.
Even the Note 9 method didn't work!
Click to expand...
Click to collapse
https://forum.xda-developers.com/galaxy-note-10+/how-to/ash5-official-stock-fw-update-odin-t3957812
Related
1. download CF-Auto-Root-espressorf-espressorfxx-gtp3100.zip
2. download odin (any version)
3. install latest kies on windows to get the adb and usb drivers installed on your system
4. Turn off your TAB2 and wait for vibration feedback indicating complete shutdown of system
5. now hold volume DOWN button + power button to get into DOWNLOAD MODE and confirm by pressing volume UP button to get into download mode.
6. now open odin on windows and then connect your TAB2 via usb and wait until the drivers for adb are installed
7. if everything is perfect, then odin should detect your TAB2 and you will see a confirmation saying "ADDED" and an indicator will glow
8. extract the CF-Auto-Root-espressorf-espressorfxx-gtp3100.zip file into any folder and then using PDA option in odin, browse to the extracted file and select it
9. ##WARNING## ONLY "auto reboot and F.RESET time " should be checked, all other options should remain unchecked.
10.press start button and wait for it to be flashed.
11.TAB2 will do rest automatically and you will get back to your homescreen automatically
12. GUESS WHAT? now you are ROOTED!!!!:good::good::good:
DOWNLOAD LINKS WILL BE PROVIDED SHORTLY
PRESS THANKS IF IT WORKS FOR YOU TO SHOW SUPPORT
I have recently rooted and installed Blisspop rom to my Tab S. I decided to revert back to the stock rom. I download the rom for the UK and applied via Odin. Download completed and the tab rebooted. The tab is now stuck with the Samsung logo. I can reboot in Odin recovery. I have tried to download openrecovery-twrp tar expecting to see and use TWRP when going into recovery but I don't. Help!
blaired said:
I have recently rooted and installed Blisspop rom to my Tab S. I decided to revert back to the stock rom. I download the rom for the UK and applied via Odin. Download completed and the tab rebooted. The tab is now stuck with the Samsung logo. I can reboot in Odin recovery. I have tried to download openrecovery-twrp tar expecting to see and use TWRP when going into recovery but I don't. Help!
Click to expand...
Click to collapse
1. Turn off your Tab.
2. Press at the same time the buttons Home, Power and Volume +
3. With button Volume - go to wipe data/factory reset
4. Press Power button
5. Wait restart Tab (it may take a few minutes)
I hope this has helped you
Regards
porcelana said:
1. Turn off your Tab.
2. Press at the same time the buttons Home, Power and Volume +
3. With button Volume - go to wipe data/factory reset
4. Press Power button
5. Wait restart Tab (it may take a few minutes)
I hope this has helped you
Regards
Click to expand...
Click to collapse
Thanks but I do not have wipe data/factory reset to choose. All I have is the Odin mode screen. downloading do not turn off target.
In this case, you must first find and then download the correct official stock firmware for your tablet via KIES:
1. Updating to the latest version of KIES program in your PC
2. Run KIES
3. Connect your Tab with Download mode to PC with KIES.
4. KIES Menu Tools -> Firmware Upgrade and Initialisation -> Model name (your Model name Tab. For example SM-T800 or SM-T805) -> OK -> S / N (Serial Number of your Tab from sticker on original box Samsung or sticker on back cover of the Tab) -> OK -> OK -> OK
5. Turn on your Tab in the Download Mode ( press at the same time and hold for approximately 4 seconds the buttons Home, Power and Volume - and then press button Volume +)
6. Next step by step according to the instructions KIES
Please have patience! It can demand good Internet connection and can take some hours.
Regards
Hi
after i flashed the patched twrp my phone doesnt boot to recovery neither to system and keep restarting
any suggestion would be highly appreciated
thank you
FOR ANY ONE GOT THE SAME PROBLEM ! THIS FIXED MY PROBLEM
Quote:
Originally Posted by jtanhw
try connecting your phone to your pc with the usb type c cable, and do voldown + power to reboot the phone, and the moment the screen turns black, press volup + voldown. It'll bring you to a different screen where you can press volup to go into download mode for flashing the stock firmware via odin. I got my stock firmware from https://samfrew.com/all/page/2/#t (you'll need to search for your model number - sm-a505f/sm-a505fn/sm-a505fm, and select the correct region. Also, select the correct modem version (the last 4 letters/number of the item to download). Then, follow the "flashing guide" at the bottom of the samfrew page where you downloaded your firmware.
Click to expand...
Click to collapse
Couple questions
I just picked up a SM-G960F/DS for experimenting with and am wondering about rooting it. I haven't put a SIM in it yet. Can it be used without a SIM card? I don't plan on using it as a phone just connecting it to Wi-Fi and experimenting with it. I am not sure what firmware to put on it. It came with BUILD R16NW.G960FXXU1BRF8. I live in Canada and I am not sure which firmware to download for it.
As far as rooting goes does it need a SIM in it to do any of this? Can i just add my Google account to get my Apps on it after rooting?
I have not rooted anything since my S6 and searched a bit and think this is the steps to root the S9.
I think that I should first be on latest Firmware before starting this?
Steps as I found info on process to get Root
got Odin3_v3.14.1.zip on PC and USB drivers - my SM-G960W connects okay
1 enable OEM unlock on phone
Downloaded twrp-3.3.1-1-starlte.img for S9 to PC
Use Bixby Key+Volume Down+Power to enter Download Mode and connect the device to PC USB
2 Open Odin and un-tick auto reboot in "options" tab, make sure that device is detected, Put twrp-3.3.1-1-starlte.img file into AP tab, Click Start
3 When Odin shows "PASS", disconnect the usb cable and press simultaneously the "Bixby key" + "Vol. Down" + "Power" buttons until the download mode disappears
At the precise moment the screen becomes black, immediately release the "Vol.Down" button and press the "Bixby key" + "Vol. UP" + "Power" buttons during 10 to 15sec to forcefully enter TWRP recovery
4 in TWRP swipe "Allow modifications"
5 Go into Wipe menu and select "Format data"
6 Reboot into TWRP recovery again, swipe to "Allow modification" connect phone to PC again Put RMM-State_Bypass.zip and no-verity-opt-encrypt-6.1.zip zips into external sdcard (or does this get done all in step 5?)
7 Flash RMM-State_Bypass.zip
8 Flash no-verity-opt-encrypt-6.1 zip
9 Reboot the phone into system Setup Google account.
now it gets confusing as to what to do for root...
So any help?
I imagine that the first thing I need to figure out is what firmware to download for it.
Has done, if no longer needed can be deleted
solved
Download Mode:
1 Step: Device switched off
2 Step: Keep volume up and down pressed
3 Step: Connect the keys to a PC via USB-C while keeping them pressed
Hi Guys,
I bought a Note+ (N975f, DBT) used. Since it has a crack on the front and was therefore cheap, I wanted to root it.
because as a newbie I am not allowed to insert external links, here only hints:
Following the instructions of topjohnwu with Magisk
However, it did not work. It is always at this point, red marked:
"Unlocking Bootloader
Unlocking BL on modern Samsung devices have some caveats, so I figure this would be helpful.
Allow bootloader unlocking in Developer options → OEM unlocking
Reboot to download mode: reboot and press the download mode key combo for your device.
Long press volume up to unlock the bootloader. This will wipe your data and automatically reboot.
failed.
In download mode when pressing Vol + key the following appears in red
"Reboot Recovery Cause: BL: Recovery Mode Set by key"
I have tried several times and I got this version from
samfw firmware/SM-N975F/DBT/N975FXXU6DTJ4
is used.
I assumed that it is because of the firmware then I used this version
SM-N975F_10_20201103172903_jy9pngyoln_fac
from Frija is used.
For flashing I used Odin3-v3.14.4.
After the last try with the version from Frija (Odin didn't show an error) a screen with a photo of the mask of Kylo Ren appears after Samsung. After 1 minute it starts again.
it is this picture
soyacincau 2019/11/191120-samsung-note-10-wallpaper-preview jpg
In Odin it is detected, but flashing again is not possible it stops at "SetupConnection".
I can only turn off the phone when it is connected to the PC and hold down Bixy/Power + Vol up.
Can I still save it, if so how?
Thanks in advance