Develop Bugs

Samsung S6 SM-G920P SPRINT stuck on samsung logo on boot

I bought 2 Galaxy S6 devices, unlocked by the store I bought them from. 3 days ago my wifes phone rebooted and came up with the following error:
KERNEL IS NOT SEANDROID ENFORCING
Custom binary blocked by FRP Lock.
I tried doing the smart switch restore, but the app doesn't like my model/SN combination. I got ODIN and a Lollipop 5.11.1 firmware for my model, flashed it using the ODIN flash procedure, that was successful, once my phone power cycled it is now stuck on the SAMSUNG logo startup screen and will not boot any further, the error messages have gone away. I can get it into recovery and download mode, but not sure what else to do to fix this bootup problem. Maybe the bootloader is toast?

canussie said:
I bought 2 Galaxy S6 devices, unlocked by the store I bought them from. 3 days ago my wifes phone rebooted and came up with the following error:
KERNEL IS NOT SEANDROID ENFORCING
Custom binary blocked by FRP Lock.
I tried doing the smart switch restore, but the app doesn't like my model/SN combination. I got ODIN and a Lollipop 5.11.1 firmware for my model, flashed it using the ODIN flash procedure, that was successful, once my phone power cycled it is now stuck on the SAMSUNG logo startup screen and will not boot any further, the error messages have gone away. I can get it into recovery and download mode, but not sure what else to do to fix this bootup problem. Maybe the bootloader is toast?
Click to expand...
Click to collapse
KERNEL IS NOT SEANDROID ENFORCING ---> its not error and not important just a message that you use Custome Kernel or Recovery.
Go to Recovery and do Wiping (Cache,Data,All) and reboot it should boot.
if not download latest ROM (PD3 or PD2) and flash using ODin

mahdi72 said:
KERNEL IS NOT SEANDROID ENFORCING ---> its not error and not important just a message that you use Custome Kernel or Recovery.
Go to Recovery and do Wiping (Cache,Data,All) and reboot it should boot.
if not download latest ROM (PD3 or PD2) and flash using ODin
Click to expand...
Click to collapse
I tried recovery, that didn't work. I have not tried PD3 or PD2 ROM, I will try that and see how it goes.

canussie said:
I tried recovery, that didn't work. I have not tried PD3 or PD2 ROM, I will try that and see how it goes.
Click to expand...
Click to collapse
OK, I have found a few different ROMs, what would the filename of the PD2 or PD3 ROM be for the SM-G920p?

canussie said:
OK, I have found a few different ROMs, what would the filename of the PD2 or PD3 ROM be for the SM-G920p?
Click to expand...
Click to collapse
PD3 or PD2 is BuildNumber.PD2 released and after flashing that you can take PD3 from OTA Update. PD2 is based on Android 6.0.1
http://samsung-updates.com/details/65838//SM-G920P/SPR/G920PVPS3CPD2.html

Saafir said:
You can download both PD2 or PD3 from this thread so you don't have throttled download. Are you using Sprint for service, since you say its an unlocked device?
http://forum.xda-developers.com/spr...uide-links-files-update-root-restore-t3366862
Click to expand...
Click to collapse
No, I am not using sprint . I am using Telstra in Australia.

Saafir said:
You can download both PD2 or PD3 from this thread so you don't have throttled download. Are you using Sprint for service, since you say its an unlocked device?
http://forum.xda-developers.com/spr...uide-links-files-update-root-restore-t3366862
Click to expand...
Click to collapse
And also.. thank you for your help .

canussie said:
And also.. thank you for your help .
Click to expand...
Click to collapse
I flashed PD2, it goes further than it did before... instead of stopping at the Samsung Galaxy S6 logo, it now goes straight to the android recovery screen. Attached is the screenshot. I am downloading PD3 and will try that next.

canussie said:
I flashed PD2, it goes further than it did before... instead of stopping at the Samsung Galaxy S6 logo, it now goes straight to the android recovery screen. Attached is the screenshot. I am downloading PD3 and will try that next.
Click to expand...
Click to collapse
Update. Looks like I get the same results with PD3.

Saafir said:
Can you look on the back of your device, on the bottom and confirm it is SM-G920P please
Click to expand...
Click to collapse
Sure is .
SM-G920P.

Saafir said:
You will have to search for a guide to get this device back working on your carrier. I'm not very familiar with using unlocked devices on other carriers. I myself would take it back to the place of purchase. Perhaps someone else will jump in with better knowledge. @koop1955
Click to expand...
Click to collapse
Thanks for the advice, I bought it in Canada, I am now in Australia and not going back to Canada anytime soon.

canussie said:
And also.. thank you for your help .
Click to expand...
Click to collapse
I have never experienced this (only occurs on phones outside the US) and can't offer you a direct solution, but this person seems to have solved the same problem on the Edge model using a toolkit:
https://www.youtube.com/watch?v=HlMQQPpqELI
Hope this helps you.

U must have tried to install a custom recovery or a kernel try to drain s6 battery to 0% to do that go into odin mode let it sit and turn off automatically. .when off plug in charger..charge to about 5% first go into recovery wipe data n cache restart ur phone ...simple restarting the phone wont help ya..if this doesnt help u try installing 5.11 BOL1 stock rom...n then drain it 0% repeat the procedure
Sent from my LG-H815 using XDA-Developers mobile app

canussie said:
I bought 2 Galaxy S6 devices, unlocked by the store I bought them from. 3 days ago my wifes phone rebooted and came up with the following error:
KERNEL IS NOT SEANDROID ENFORCING
Custom binary blocked by FRP Lock.
I tried doing the smart switch restore, but the app doesn't like my model/SN combination. I got ODIN and a Lollipop 5.11.1 firmware for my model, flashed it using the ODIN flash procedure, that was successful, once my phone power cycled it is now stuck on the SAMSUNG logo startup screen and will not boot any further, the error messages have gone away. I can get it into recovery and download mode, but not sure what else to do to fix this bootup problem. Maybe the bootloader is toast?
Click to expand...
Click to collapse
DRK no longer
---------- Post added at 09:50 PM ---------- Previous post was at 09:47 PM ----------
I bet everything you lost imei and DRK baneband and more

Hieu vn said:
DRK no longer
---------- Post added at 09:50 PM ---------- Previous post was at 09:47 PM ----------
I bet everything you lost imei and DRK baneband and more
Click to expand...
Click to collapse
Agreed

anderd said:
Agreed
Click to expand...
Click to collapse
Ok, any tips on how to restore this?

canussie said:
Ok, any tips on how to restore this?
Click to expand...
Click to collapse
Im sure there's a solution that doesn't require a box, but im not aware of it at the moment, If the IMEI/MEID is gone, you'll have to find someone who can repair that, and most claim their repairs only fix the GSM side (IMEI) and doesn't write a new clean sprint MEID to the device. In the end, it may end up being easier to replace the device and sell the current one for parts. If you only need GSM service, then im sure someone, either on here, or another forum, or a auction site, could help you for a fee. Thats all i can suggest at the moment.

mahdi72 said:
PD3 or PD2 is BuildNumber.PD2 released and after flashing that you can take PD3 from OTA Update. PD2 is based on Android 6.0.1
http://samsung-updates.com/details/65838//SM-G920P/SPR/G920PVPS3CPD2.html
Click to expand...
Click to collapse
PD2 Workedfor me thanks...

try flashing new kernel

Honor 8 pro (DUK-L09) bricked

Got my honor 8 pro bricked while fixing bootloop using twrp but now twrp have also gone and now its bricked.
At fastboot its showing (phone unlocked and FRP lock)
And also twrp recovery not loading.
I've also tried dload method but it always fails after 5%.
Was there any solution for this plz hepl!!
Ty

service center
jayesh 95. said:
Got my honor 8 pro bricked while fixing bootloop using twrp but now twrp have also gone and now its bricked.
At fastboot its showing (phone unlocked and FRP lock)
And also twrp recovery not loading.
I've also tried dload method but it always fails after 5%.
Was there any solution for this plz hepl!!
Ty
Click to expand...
Click to collapse

hockhou said:
service center
Click to expand...
Click to collapse
I've been there , they were saying the motherboard has to be replaced which will cost around 25000 INR

they are suck. now you use firmware finder download software, download Multi-Tool.exe on your computer.
QUOTE=jayesh 95.;76260764]I've been there , they were saying the motherboard has to be replaced which will cost around 25000 INR [/QUOTE]

hockhou said:
they are suck. now you use firmware finder download software, download Multi-Tool.exe on your computer.
Click to expand...
Click to collapse
[/QUOTE]
Thanks,i'll try this hope it will work and which rom should I use for (DUK-L09C675) there are three FullOTA.MF roms on firmware finder for this.

download three rom
Thanks,i'll try this hope it will work and which rom should I use for (DUK-L09C675) there are three FullOTA.MF roms on firmware finder for this.[/QUOTE]

hockhou said:
download three rom
Click to expand...
Click to collapse
No, they were 3 full package.

jayesh 95. said:
No, they were 3 full package.
Click to expand...
Click to collapse
I mean click on the latest version to download and get 3 update.zio

hockhou said:
I mean click on the latest version to download and get 3 update.zio
Click to expand...
Click to collapse
Ok, i'll try .

jayesh 95. said:
Ok, i'll try .
Click to expand...
Click to collapse
If you can, try brushing twrp with multi-tool

How to properly relock bootloader?

Hi,
I had rooted my phone (ANE-AL00 C675) long back. Now there is a yellowing of screen, so I want to take it to the customer centre. For this, I want to relock the bootloader. However, when I relock, it goes to bootloop. When I unlock it again, it is working
[1] I rooted using the method from here - https://forum.xda-developers.com/hu...t-p20-lite-t3773923/post76137173#post76137173. I've flashed the original ramdisk before relocking.
[2] I had flashed twrp. I flashed stock recovery before relocking from here - https://forum.xda-developers.com/huawei-p20-lite/help/req-stock-recovery-p20-lite-t3803027
[3] I had installed xposed. Uninstalled using the option within xposed.
What am I doing wrong? Please help me relock the phone. TIA.

Arseon said:
Hi,
I had rooted my phone (ANE-AL00) long back. Now there is a yellowing of screen, so I want to take it to the customer centre. For this, I want to relock the bootloader. However, when I relock, it goes to bootloop. When I unlock it again, it is working
[1] I rooted using the method from here - https://forum.xda-developers.com/hu...t-p20-lite-t3773923/post76137173#post76137173. I've flashed the original ramdisk before relocking.
[2] I had flashed twrp. I flashed stock recovery before relocking from here - https://forum.xda-developers.com/huawei-p20-lite/help/req-stock-recovery-p20-lite-t3803027
[3] I had installed xposed. Uninstalled using the option within xposed.
What am I doing wrong? Please help me relock the phone. TIA.
Click to expand...
Click to collapse
Is your CUST = C807 ?

kilroystyx said:
Is your CUST = C807 ?
Click to expand...
Click to collapse
Forgot to mention that. CUST is C675, Indian version

Arseon said:
Forgot to mention that. CUST is C675, Indian version
Click to expand...
Click to collapse
For your location I see none Firmware that lock (not relock) automatically your bootloader.
I searched ANNE-AL00 in the site https://androidhost.ru/search.html

Arseon said:
Forgot to mention that. CUST is C675, Indian version
Click to expand...
Click to collapse
Your model is ANE-AL00 or ANE-AL00I ?

kilroystyx said:
Your model is ANE-AL00 or ANE-AL00I ?
Click to expand...
Click to collapse
ANE-AL00

Arseon said:
ANE-AL00
Click to expand...
Click to collapse
If you install again stock firmware the device will be in the correct status to re-lock the bootloader.
Check in this link if the firmware is familiar for you :
https://pro-teammt.ru/firmware-database/?firmware_model=ANE-AL00C675&firmware_page=0
Use this tool for installation => https://forum.xda-developers.com/honor-9/development/tool-flash-official-firmware-recovery-t3769279

kilroystyx said:
If you install again stock firmware the device will be in the correct status to re-lock the bootloader.
Check in this link if the firmware is familiar for you :
https://pro-teammt.ru/firmware-database/?firmware_model=ANE-AL00C675&firmware_page=0
Use this tool for installation => https://forum.xda-developers.com/honor-9/development/tool-flash-official-firmware-recovery-t3769279
Click to expand...
Click to collapse
Hi, I did go through the list but 8.0.0.131 is not available. Is there any way to relock without the stock rom? I've been unable to find 8.0.0.131 rom on the internet.

Guys, any help on this is appreciated.

Arseon said:
Guys, any help on this is appreciated.
Click to expand...
Click to collapse
Hi there
I've read the confusion Altough I must ask, why do you need that specific version 8.0.0.131?
If you just wanna get a "lock" state not a "relock" state to get the warranty back, then flash any dload package available, if the phone is Indian then this is what you are looking for:
https://androidhost.ru/KY
If you don't know the dload procedure just quote me or DM me.
Cheers,
AS

ars_chelsea said:
Hi there
I've read the confusion Altough I must ask, why do you need that specific version 8.0.0.131?
If you just wanna get a "lock" state not a "relock" state to get the warranty back, then flash any dload package available, if the phone is Indian then this is what you are looking for:
https://androidhost.ru/KY
If you don't know the dload procedure just quote me or DM me.
Cheers,
AS
Click to expand...
Click to collapse
Hi ars_chelsea,
Can you double check the link posted by you?
I'm seeing wrong or that firmware is for P8 lite 2017.

Hi, I was under the impression that you need the stock rom version to relock bootloader. Please advice on how to proceed.
ars_chelsea said:
Hi there
I've read the confusion Altough I must ask, why do you need that specific version 8.0.0.131?
If you just wanna get a "lock" state not a "relock" state to get the warranty back, then flash any dload package available, if the phone is Indian then this is what you are looking for:
https://androidhost.ru/KY
If you don't know the dload procedure just quote me or DM me.
Cheers,
AS
Click to expand...
Click to collapse

kilroystyx said:
Hi ars_chelsea,
Can you double check the link posted by you?
I'm seeing wrong or that firmware is for P8 lite 2017.
Click to expand...
Click to collapse
You are right it's for P8 Lite 2017 (PRA-AL00), my bad on that :/
---------- Post added at 01:22 PM ---------- Previous post was at 01:18 PM ----------
Arseon said:
Hi, I was under the impression that you need the stock rom version to relock bootloader. Please advice on how to proceed.
Click to expand...
Click to collapse
Tell one thing though, can you access eRecovery?
If so, have you tried to restore it from there? It also downloads a signed full firmware which makes your bootloader on "lock" state.

Hi,
I can access eRecovery. But it fails at 99%.
ars_chelsea said:
You are right it's for P8 Lite 2017 (PRA-AL00), my bad on that :/
---------- Post added at 01:22 PM ---------- Previous post was at 01:18 PM ----------
Tell one thing though, can you access eRecovery?
If so, have you tried to restore it from there? It also downloads a signed full firmware which makes your bootloader on "lock" state.
Click to expand...
Click to collapse

Arseon said:
Hi,
I can access eRecovery. But it fails at 99%.
Click to expand...
Click to collapse
That is really weird... Tomorrow i'll show you some stuff you can do while I'm working.

I've sent you a DM with a 24H valid link to the correct dload package, please use it to restore your device.

ars_chelsea said:
I've sent you a DM with a 24H valid link to the correct dload package, please use it to restore your device.
Click to expand...
Click to collapse
Hi, it says link expired. Please share it again. Thanks for the help.

Arseon said:
Hi, it says link expired. Please share it again. Thanks for the help.
Click to expand...
Click to collapse
Ok, I've sent you another one, please check.

Ok my way the easy one- instead BL relock you will get locked
1 Install TWRP.
2 Download OEMINFO for your model any (dont use DD if your phone is SS sim) need image not zip - upload on sdcard
3From TWRP install oeminfo.
4Restart phone and go to Erecovery it should now start downloading right sys and bootloader will be like never touch.
Good luck

Hi, please share the link again. Was out of station in the last week.
ars_chelsea said:
Ok, I've sent you another one, please check.
Click to expand...
Click to collapse

xiaomi redmi note 9s bootloop

I have tried to updgrade phone firmware to install lineage after finished upgrade the phone reboot and stuck in bootloop and I can't start fastboot or recovery.
I went with edl mode for qualcoom processeors on qfil - standalone and with qpst - every time I got
Download Fail:FireHose Fail:FHLoader Fail:The system cannot find the file specified​I tried more than 4 stock rom and same problem
If I use standalone version the error will be different
I tried other programs but all of it have only firehose for emmc storage and mine is ufs I am trying for more than 15 days to solve it and I can't
anyone have solution for this
My phone version is globally RJWMIXM

Abo Emran said:
I have tried to updgrade phone firmware to install lineage after finished upgrade the phone reboot and stuck in bootloop and I can't start fastboot or recovery.
I went with edl mode for qualcoom processeors on qfil - standalone and with qpst - every time I got
Download Fail:FireHose Fail:FHLoader Fail:The system cannot find the file specified​I tried more than 4 stock rom and same problem
If I use standalone version the error will be different
I tried other programs but all of it have only firehose for emmc storage and mine is ufs I am trying for more than 15 days to solve it and I can't
anyone have solution for this
My phone version is globally RJWMIXM
Click to expand...
Click to collapse
Is the bootloader unlocked?

NOSS8 said:
Is the bootloader unlocked?
Click to expand...
Click to collapse
yes

Abo Emran said:
yes
Click to expand...
Click to collapse
I send you a P.M.

sorry but I am working on vessel so I don't have internet all time
NOSS8 said:
I send you a P.M.
Click to expand...
Click to collapse

Abo Emran said:
sorry but I am working on vessel so I don't have internet all time
Click to expand...
Click to collapse

sorry but I tried mi flash tool and it is request a auth. account
is this version without auth.

Abo Emran said:
sorry but I tried mi flash tool and it is request a auth. account
is this version without auth.
Click to expand...
Click to collapse
Nope, the solution is in PM

my friend I can't run fastboot or recovery only edl

Abo Emran said:
my friend I can't run fastboot or recovery only edl
Click to expand...
Click to collapse
That's why I sent you a PM, they have permission.

Question [CLOSED] hi all i need help i brick my nubia red magic 8 pro+

can someone please help me or send me some service to unbrick my nubia?
i can pay

What's happened?

Stusick said:
What's happened?
Click to expand...
Click to collapse
i try to root the phone and now it's in corrupted file and when i press power to continue he show the logo of red magic and thats it

i can enter to fastboot mode but nothing help

How did you root your phone? Rooting the phone is as simple as flashing patched init_boot.img via fastboot flash init_boot. A lot of users here brick their phones because they patched and flashed the boot.img instead of the init_boot.img.

yakir150 said:
i can enter to fastboot mode but nothing help
Click to expand...
Click to collapse
If you can enter fastboot you can still fix..flash your original boot.img from fastboot.
fastboot flash boot boot.img

batuken said:
How did you root your phone? Rooting the phone is as simple as flashing patched init_boot.img via fastboot flash init_boot. A lot of users here brick their phones because they patched and flashed the boot.img instead of the init_boot.img.
Click to expand...
Click to collapse
yeah so did i also flash boot.img instead init_boot.img
but it's ok now
someone help me remotely and fix it

yakir150 said:
yeah so did i also flash boot.img instead init_boot.img
but it's ok now
someone help me remotely and fix it
Click to expand...
Click to collapse
If this is a paid service could you please give me the information so I can fix my phone. Thanks.

[email protected] said:
If this is a paid service could you please give me the information so I can fix my phone. Thanks.
Click to expand...
Click to collapse
Viet nam ah

izsdeaman said:
Viet nam ah
Click to expand...
Click to collapse
I am a Vietnamese and I live in California USA.

yakir150 said:
yeah so did i also flash boot.img instead init_boot.img
but it's ok now
someone help me remotely and fix it
Click to expand...
Click to collapse
So flashing stock boot.img with fastboot wouldn't fix?

JWnSC said:
So flashing stock boot.img with fastboot wouldn't fix?
Click to expand...
Click to collapse
i didnt try it i just talk to some service and pay ^_^

yakir150 said:
i didnt try it i just talk to some service and pay ^_^
Click to expand...
Click to collapse
Could you please give me the information to contact this service. Thanks.

Mod Edit: Quoted Post Removed
I buy and he fix

Price please and tag room share some more info please

Mod Edit: Quoted Post Removed
Have you seen which programs were used?

aaa.bbb111222 said:
Have you seen which programs were used?
Click to expand...
Click to collapse
He used miflash, QFIL (with various different parameters than normal use), QFL, and fastboot. Finally he recreated two super partitions for my phone and flash odm, system, and vendor images into the supper partitions. After 4 hr of trying, my phone boots however I still have the red warning "Your phone is corrupt".

[email protected] said:
He used miflash, QFIL (with various different parameters than normal use), QFL, and fastboot. Finally he recreated two super partitions for my phone and flash odm, system, and vendor images into the supper partitions. After 4 hr of trying, my phone boots however I still have the red warning "Your phone is corrupt".
Click to expand...
Click to collapse
lock bootloader and flash full rom

izsdeaman said:
lock bootloader and flash full rom
Click to expand...
Click to collapse
how do you flash a full rom?

yakir150 said:
how do you flash a full rom?
Click to expand...
Click to collapse
Put the rom in the root directory or on external SD card through the C connector. Use local update and choose the rom.