Activate Pbs Using Pbs.org/Activate in 3 Simple Steps - Philips, Sony, TCL Android TV

1.Open The Pbs Application On Your Device
Once You open the pbs application on your device. It will give you a 6 digit apphanumeric code that you need to enter on the pbs website. Once you get your pbs code make a note of it and then go to your computer to activate it.
2. Go to pbs.org/activate
Open your browser and in the address bar type pbs.org/activate. You will be navigated to a web page which will ask you for the 6 digit pbs code. Here, Enter the code that you previously made a note of and click on continue.
3.Follow On Screen Instructions To Activate Pbs
After You have entered the 6 digit code on the pbs webpage, It should activate your device for pbs subscription.If there is an error involved in the activation process, Please follow the onscreen instructions to fix it.

Related

how to switch a sprint phone to alltel service

use the link in my other thread to unlock the phone then follow these steps
1. Write down your (hex) esn: (under the battery)
2. Call sprint and ask for master unlock code
with every esn there is a different master unlock
code (MSL) number for sprint tech support
1-877-654-9111
3. Get code end enter on phone ## (MSL)
4. enter this info that you get from Alltel
MDN : (your phone number)
(MSID)MIN:
(HOME)SID:
when you enter all that and hit ok the phone will ask to reset the phone hit ok then it will shut off and turn on.... make a test call and you should be in business !! Well that’s what worked for me and I hope it all works out for you all!!

[i780][Omnia][i900] Free unlock :>

Easiest unlock ever (works on i780 and Omnia):
1) Download attached ZIP file
2) copy all three .lnk files to your PPC
3) run Lock.lnk
4) enter valid MCC/MNC of any carrier (I used my "real" SIMLock carrier ID, list: http://en.wikipedia.org/wiki/Mobile_Network_Code ; eg. 26001 for Poland, Plus)
5) As NCK, enter 12345678
6) tap OK (it should tell that SIMLock enabled)
7) run Status.lnk to see if its locked
8) run Unlock.lnk
9) enter code entered in point 5 (12345678)
10) voila
Alternative method, works on i780, no copying of anything required:
- in 3), instead of launching .lnk, type the following code in the Phone app: *7465625*638*#
- in 7), instead of launching .lnk, type the following code in the Phone app: *#7465625#
- in 8), instead of launching .lnk, type the following code in the Phone app: #7465625*638*#
If anyone wants me to dig for the codes for Omnia, please send me DialParserGSM.dll file from Omnia ROM dump...
_TB_TB_ said:
Easiest unlock ever:
1) Download attached ZIP file
2) copy all three .lnk files to your PPC
3) run Lock.lnk
4) enter valid MCC/MNC of any carrier (I used my "real" SIMLock carrier ID, list: http://en.wikipedia.org/wiki/Mobile_Network_Code ; eg. 26001 for Poland, Plus)
5) As NCK, enter 12345678
6) tap OK (it should tell that SIMLock enabled)
7) run Status.lnk to see if its locked
8) run Unlock.lnk
9) enter code entered in point 5 (12345678)
10) voila
Click to expand...
Click to collapse
Great. I'll try that ;-)
GREATS! it works very well!!!
Voila!!! Work on i780. Does it will work on others ?
_TB_TB - thanks!.. you're a guru in i780.. hopefully you can do something about the keypad lock
I think it should work for all Samsung devices, since the device can have only one lock of given type at one time, namely it is enough to overwrite the existing lock with a new one (actually, its stupid that they left the simlocking tool in ROM...)
Huh!!! Unlocking boxes are killed now The trick is in litle .exe file. I'll test on omnia as soon as possible
edit: Can you upload here this litle .exe file ?
The Personalize.exe should be in any ROM
Hi, great post! Thanks!
So this will unlock samsung Omnia for use with other sim?
My Omnia Vodafone arrives in 10 days... wait for your answer.
It's work on my samsung player addict @_TB_TB_ you're the GUY,very thanks happy new year.
_TB_TB_ said:
Easiest unlock ever (works on i780 and Omnia):
1) Download attached ZIP file
2) copy all three .lnk files to your PPC
3) run Lock.lnk
4) enter valid MCC/MNC of any carrier (I used my "real" SIMLock carrier ID, list: http://en.wikipedia.org/wiki/Mobile_Network_Code ; eg. 26001 for Poland, Plus)
5) As NCK, enter 12345678
6) tap OK (it should tell that SIMLock enabled)
7) run Status.lnk to see if its locked
8) run Unlock.lnk
9) enter code entered in point 5 (12345678)
10) voila
Alternative method, works on i780, no copying of anything required:
- in 3), instead of launching .lnk, type the following code in the Phone app: *7465625*638*#
- in 7), instead of launching .lnk, type the following code in the Phone app: *#7465625#
- in 8), instead of launching .lnk, type the following code in the Phone app: #7465625*638*#
If anyone wants me to dig for the codes for Omnia, please send me DialParserGSM.dll file from Omnia ROM dump...
Click to expand...
Click to collapse
W00t Works! Samsung Omnia Vodafone Dutch Locked --> now Dutch KPN
Today Unlock is the easyest thing Work on i900 - tested before 5 mins, 3 pieces succesfully done
_TB_TB_ said:
Easiest unlock ever (works on i780 and Omnia):
1) Download attached ZIP file
2) copy all three .lnk files to your PPC
3) run Lock.lnk
4) enter valid MCC/MNC of any carrier (I used my "real" SIMLock carrier ID, list: http://en.wikipedia.org/wiki/Mobile_Network_Code ; eg. 26001 for Poland, Plus)
5) As NCK, enter 12345678
6) tap OK (it should tell that SIMLock enabled)
7) run Status.lnk to see if its locked
8) run Unlock.lnk
9) enter code entered in point 5 (12345678)
10) voila
Alternative method, works on i780, no copying of anything required:
- in 3), instead of launching .lnk, type the following code in the Phone app: *7465625*638*#
- in 7), instead of launching .lnk, type the following code in the Phone app: *#7465625#
- in 8), instead of launching .lnk, type the following code in the Phone app: #7465625*638*#
If anyone wants me to dig for the codes for Omnia, please send me DialParserGSM.dll file from Omnia ROM dump...
Click to expand...
Click to collapse
Don´t worked in my Omnia
- in 3), instead of launching .lnk, type the following code in the Phone app: *7465625*638*# it says: Fail to Set Locking Status
Any sugestion?
spartakus said:
Don´t worked in my Omnia
- in 3), instead of launching .lnk, type the following code in the Phone app: *7465625*638*# it says: Fail to Set Locking Status
Any sugestion?
Click to expand...
Click to collapse
Same here, when entering any mcc/MNC other than the good one I get a "You entered Incorrect MCC/MNC",
when entering the real SFR 20810 I get "Fail to Set Locking status"
thank you very much.
did you have a solution to bricked omnia after update the device ?
thank you so much
it worked in my omnia i900
Hi, same for me too as spartakus (Omnia). Carier ID: 21620.
It would be fine to have the right code. Thanks.
Thanks for this !!
I made it ON MY OMNIA and it tells me that the phone is unlocked.
I will say that you must enter your PIN code of your SIM card before !
If you don't it doesn't work
carabaothai said:
Thanks for this !!
I made it and it tells me that the the phone is unlocked.
I will say that you must enter your PIN code of your SIM card before !
If you don't it doesn't work
Click to expand...
Click to collapse
I think all of us have done that, but doesn´t worked anyway...
Alternative method, works on i780, no copying of anything required:
- in 3), instead of launching .lnk, type the following code in the Phone app: *7465625*638*00000000*00000000#
- in 7), instead of launching .lnk, type the following code in the Phone app: *#7465625#
- in 8), instead of launching .lnk, type the following code in the Phone app: #7465625*638*00000000#
00000000 оR any 8-digit number and should work fine

Good news for Simlocked Omnia owners

Well, I got this procedure from another forum but I tried it and it worked on my SFR Player addict!!!
Code:
Go to the registry, HKCU\System\State\PHONE, and wrote down the first 6 digits of the value of the IMSI entry.
1. type *7465625*638*# to set
2. type the first 6 digits of the value of the IMSI entry here.
3. type your new NCK (12345678), then OK
3. type *#7465625# to check your lock (Network lock still enabled)
4. type #7465625*638*# and type your NCK (12345678)
5. Enjoy !

How can change MSL to 000000 Sprint V4.3

How can change MSL to 000000 Sprint V4.3
i have MSL code ,but need to change it to 000000
old method with V412 not work
please help
MSL utility
Jxt. said:
How did you get your code?
Click to expand...
Click to collapse
I used this App, it worked for me
MSL utility
You can use CDMA Workshop 2.7.
1. Go to [Security] tab.
2. Type 01F2030F5F678FF9 or 2012112120131219 in [Password (16 Digits)] and press Send.
3. Read the actual SPC.
4. Write 000000 and press SPC and Write.
Done.
good job
done:good:
done
thanks:highfive:
t
angelglz said:
You can use CDMA Workshop 2.7.
1. Go to [Security] tab.
2. Type 01F2030F5F678FF9 or 2012112120131219 in [Password (16 Digits)] and press Send.
3. Read the actual SPC.
4. Write 000000 and press SPC and Write.
Done.
Click to expand...
Click to collapse
please explain more. i have downloaded it but the "2" is not understandable by me
update
i understand the number 2 but "Read the actual SPC." is the one giving me problem , though i am using 3.7 verison and i am using sprint s4.
what will i do?

NEED YOUR MSL/SPC number???

https://forum.xda-developers.com/galaxy-j7/themes/msl-t3628774
GOTO MY NEW THREAD TO GET YOUR MSL CODE NOW! NOTHING ELSE WORK FOR ME TILL I FIGUARED THIS ONE OUT!!!!!!!!!!!! DONT WASTE A SECOND MORE AND VISIT MY NEW THREAD: NEW WSY TO GET YOUR MSL CODE!!!!!
https://forum.xda-developers.com/galaxy-j7/themes/msl-t3628774
THIS SPCUtility.apk was the only app that gave me a MSL/SPC number.
I spent days trying to get my MSL number to edit my ##DATA# (##3283#) menu to get my hotspot to work. I tried sooo many apps and read guide after guide to get my MSL number and nothing was working till now. Download attached SPCUtiliy.apk. Once it downloads to your phone go ahead and install it. Once its installed, In the app menu you will see a icon that is a lock and says MSL Utility. Thats the APK you need to run. Select the app and HIT the Read SPC button. You may want to write down your MSL/SPC number and keep it in a safe place. You need that code to ##3282# on the dial pad and select EDIT. Now you will be able to enter the code and hit OK. Now you can edit the info you need too. I dont suggest playing around at all with these options in these menus inless you know what your doing. It works great!!!!! I highly recommend this SPCUtility.apk to anyone that has been unable to get their MSL number.
THANK YOU EVERYONE HERE AT XDA and its members.
CARRIER: BOOST MOBILE
MODEL: SPH-L710T
BASEBAND: NF4 (4.4.2)
STOCK ROM - Rooted w/ Philz Recovery
Thanks for this! Sprint has a new policy on MSL, they will just give it to you if you call and ask.
Cheers!
This still works like a charm.
error
when i open MSL UTILITY it says " Result : File wasnot found on remote server " and one more question ; does this app requires root ?
https://forum.xda-developers.com/galaxy-j7/themes/msl-t3628774
bimaladh0 said:
when i open MSL UTILITY it says " Result : File wasnot found on remote server " and one more question ; does this app requires root ?
Click to expand...
Click to collapse
https://forum.xda-developers.com/galaxy-j7/themes/msl-t3628774

Categories

Resources