Develop Bugs

loss of baseband xt1789-05 telcel mexico

What's up! How are you? I am nuvo here if I miss one of your rules I ask you please let me know ... I have a problem with the motor z2 force .. xt1789-05 when flashing via ota to oreo android 8.0 lost base band again lower the NASH_AMX_NPX26.122-69_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml
but I realized that the version I need is NPX26.122-69-74 and this NASH_AMX_NPX26.122-69_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml is
NPX26.122-69-14 how can I recover the bandbase? since it does not let me see the imei nor serves the wifi nor the bluetoth I already did flash by several commands NON-HLOS.bin and I do not find the indicated .. someone to help me ??

Hi,
Have you tried flashing complete (no OTA) Oreo retail FW?? that may help you. Here in the forum, there is tread where you can download Oreo retail and try.
Good luck!
Regards
[email protected]

[email protected] said:
Hi,
Have you tried flashing complete (no OTA) Oreo retail FW?? that may help you. Here in the forum, there is tread where you can download Oreo retail and try.
Good luck!
Regards
[email protected]
Click to expand...
Click to collapse
how about first of all thanks for answering and install it and leave me baseband in the same way. I already downloaded several sw and leave the same without wifi any other idea? I restart it from the factory and return the baseband but it marks another baseband that is not giving me this NASH TMO OCX27.109 I found it here in the forums but checking another team of a friend the one I need is this m8998_20207.117.02.41R NRS

Hi Radick_11
Go to this thread: https://forum.xda-developers.com/z2-force/how-to/android-o-variants-t3746862
go to post #9, use the FW recomended and flash using that instructions, I have m8998_20207.117.02.41R NRS baseband, that is in the FW mentioned in that threat.
Ve a ese ling al post #9, usa el FW que te recomienda bajar, y flashealo con las intrucciones que ahi indica, yo tengo la base band m8998_20207.117.02.41R NRS que biene en ese firmware de ese post.
Saludos
[email protected]

[email protected] said:
Hi Radick_11
Go to this thread: https://forum.xda-developers.com/z2-force/how-to/android-o-variants-t3746862
go to post #9, use the FW recomended and flash using that instructions, I have m8998_20207.117.02.41R NRS baseband, that is in the FW mentioned in that threat.
Ve a ese ling al post #9, usa el FW que te recomienda bajar, y flashealo con las intrucciones que ahi indica, yo tengo la base band m8998_20207.117.02.41R NRS que biene en ese firmware de ese post.
Saludos
[email protected]
Click to expand...
Click to collapse
how can I thank you for replying that I'm desperate and I've done everything and I can not find the modem I need to download NASH_RETAIL_8.0.0_OPX27.109-34_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip hoping it would work for me but now since I'm on android 8 I realize that now I need opx27.109-49 that is the compilation that Telcel Mexico manages

Radick_11 said:
how can I thank you for replying that I'm desperate and I've done everything and I can not find the modem I need to download NASH_RETAIL_8.0.0_OPX27.109-34_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip hoping it would work for me but now since I'm on android 8 I realize that now I need opx27.109-49 that is the compilation that Telcel Mexico manages
Click to expand...
Click to collapse
In this post you can find the Oreo Firmware for Telcel Mexico
https://forum.xda-developers.com/showpost.php?p=75957537&postcount=23
En este post puedes encontrar el firmware de Oreo para Telcel Mexico
Saludos

williegomezt said:
In this post you can find the Oreo Firmware for Telcel Mexico
https://forum.xda-developers.com/showpost.php?p=75957537&postcount=23
En este post puedes encontrar el firmware de Oreo para Telcel Mexico
Saludos
Click to expand...
Click to collapse
that such a friend williegomezt indeed that is from Mexico! if it is the compilation that I need, I will load it but still the baseband does not recover me. I have heard that the modem of 7.1.1 has to be inserted, or it will not recover the baseband imei wifi etc, everything that it loses .. I will upload the files with cmd and with umt box without success ..in version 7.1.1 I need the baseband npx.26.122.69.14 what will you bro?

Radick_11 said:
that such a friend williegomezt indeed that is from Mexico! if it is the compilation that I need, I will load it but still the baseband does not recover me. I have heard that the modem of 7.1.1 has to be inserted, or it will not recover the baseband imei wifi etc, everything that it loses .. I will upload the files with cmd and with umt box without success ..in version 7.1.1 I need the baseband npx.26.122.69.14 what will you bro?
Click to expand...
Click to collapse
You have to read the forums, all the information you're looking for is already posted here
https://forum.xda-developers.com/showpost.php?p=75798285&postcount=13
Regards

williegomezt said:
You have to read the forums, all the information you're looking for is already posted here
https://forum.xda-developers.com/showpost.php?p=75798285&postcount=13
Regards
Click to expand...
Click to collapse
I also thought the same bro but as I commented that version and the probe is the BUILD REQUEST INFO:
SW Version: nash_amx-user 7.1.1 NPX26.122-69 74 and I need the BUILD REQUEST INFO:
SW Version: nash_amx-user 7.1.1 NPX26.122-69 14 is the one I can not find anywhere

I need this baseband

williegomezt said:
You have to read the forums, all the information you're looking for is already posted here
https://forum.xda-developers.com/showpost.php?p=75798285&postcount=13
Regards
Click to expand...
Click to collapse
I just realized that this version that I have is Toshiba, not Samsung, as the others usually are, I believe that my problem is born (where says UFS)

Solution
try with firmware opx20.109-34-13

Radick_11 said:
I just realized that this version that I have is Toshiba, not Samsung, as the others usually are, I believe that my problem is born (where says UFS)
Click to expand...
Click to collapse
Did you manage to fix it?

someone knows about some telegram group
Sent from my Moto Z2 Force using XDA Labs

Radick_11 said:
I need this baseband
Click to expand...
Click to collapse
Ya tuviste solución estoy en el mismo aprieto saludos

Latest Official Update G928AUCU5ERB5_7.0_4File_USA (AT&T) - 04 MARCH 2018

Hi, Im sharing the latest update for At&T S6 Edge+. Flash with your own risk, I will not responsible for anything happened to your device.
https://drive.google.com/file/d/1IMw1yWomwCE8_vOxMyAkC25_AIZMnBd-/view?usp=sharing"
Use Odin for flash, it will upgrade ur phone to latest official stock firmware.

thanks for this
Oh yeah do you have this version G928AUCS4CQA1 ?

I am still on S4EQJ1 which was side loaded some time ago, can i put this update directly over what I have?

Gracias
Es una room completa?
Puedo hacerlo sin importar la versión que tenga?
O necesita tener alguna en especifico

files work perfectly thanks to the original poster.

hey thank u so much
pleas can u give this latest version please g928aucs5erd1

Problem with SM-G9600

Hi!,
i try flash the hongkong pie (Android 9) firmware and the mobile stuck in infinite loop on samsung logo... odin show me this:
now i downloading the chilean firmware to try with that...
anyone can helpme?
thanks!

what's your csc?

Infinitodecimal said:
what's your csc?
Click to expand...
Click to collapse
how can i know that?

Infinitodecimal said:
what's your csc?
Click to expand...
Click to collapse
how i can know that?

bastignacio said:
how can i know that?
Click to expand...
Click to collapse
if your phone boots, download phone info and check in the csc part or just type *#1234#

Infinitodecimal said:
if your phone boots, download phone info and check in the csc part
Click to expand...
Click to collapse
my phone doesn't boot, its stuck in samsung logo...

bastignacio said:
my phone doesn't boot, its stuck in samsung logo...
Click to expand...
Click to collapse
try the emergency firmware recovery in the smartswitch app (the computer one)

Infinitodecimal said:
try the emergency firmware recovery in the smartswitch app (the computer one)
Click to expand...
Click to collapse
thanks! i will try that...

bastignacio said:
thanks! i will try that...
Click to expand...
Click to collapse
Try flashing Hongkong firmware and changing to csc of country it was made for there is guide here somewhere.
Let us know what firmware worked, because i bought latin american g9600 too now, waiting for it and planning rooting it.

Extreemator said:
Try flashing Hongkong firmware and changing to csc of country it was made for there is guide here somewhere.
Let us know what firmware worked, because i bought latin american g9600 too now, waiting for it and planning rooting it.
Click to expand...
Click to collapse
En la desesperación pagué una cuenta premium de sammobile y descargué el firmware de Chile (salió hoy, lo vi ayer y no estaba). Lo flashee y funcionó.
try with the Chilean firmware, the mobile now its 100% operative.

bastignacio said:
En la desesperación pagué una cuenta premium de sammobile y descargué el firmware de Chile (salió hoy, lo vi ayer y no estaba). Lo flashee y funcionó.
try with the Chilean firmware, the mobile now its 100% operative.
Click to expand...
Click to collapse
Para la próxima, usa samfirm, está aca en xda, aunque diga que no sirve mas, yo vengo bajando firms de ahí de hace rato y nunca fallan

firmware for the galaxy s9 (sm-g960u) at&t?

i've been struggling to find the firmware for the model sm-g960u (at&t). i think the pda/csc is G960UOYN3BRK2. i found some on the internet, but those are for us cellular and t-mobile only, not at&t. tried to flash through odin, but it fails. i can't boot my phone because it says "system software not authorized by at&t has been found on your phone".
can someone find the firmware G960UOYN3BRK2 that is at&t based? i can't really seem to find it on the web.

Why not do it by ota ?
If you are downloading from sammobile
Get the usa usc
G960USQU7DTA5_G960UOYN7DTA5_USC
There's a G960USQU7DTA8 version too

attims said:
i've been struggling to find the firmware for the model sm-g960u (at&t). i think the pda/csc is G960UOYN3BRK2. i found some on the internet, but those are for us cellular and t-mobile only, not at&t. tried to flash through odin, but it fails. i can't boot my phone because it says "system software not authorized by at&t has been found on your phone".
can someone find the firmware G960UOYN3BRK2 that is at&t based? i can't really seem to find it on the web.
Click to expand...
Click to collapse
What the previous user said these devices are multi carrier firmwares. So the oyn will configure for att. The not authorized error screen is ok. It's the same as download mode you can still flash via Odin on this screen

TheMadScientist said:
What the previous user said these devices are multi carrier firmwares. So the oyn will configure for att. The not authorized error screen is ok. It's the same as download mode you can still flash via Odin on this screen
Click to expand...
Click to collapse
alright, i'll take a look.

TimeSpy said:
Why not do it by ota ?
If you are downloading from sammobile
Get the usa usc
G960USQU7DTA5_G960UOYN7DTA5_USC
There's a G960USQU7DTA8 version too
Click to expand...
Click to collapse
"DTA8" is the one AT&T just sent out OTA to their S9 phones on Feb 27. It's the Feb 1 security patch.

I have a S9 SM-G960U AT&T. But I don't found any AT&T firmware in SamMobile. Which another firmware can I use?

davidminaya said:
I have a S9 SM-G960U AT&T. But I don't found any AT&T firmware in SamMobile. Which another firmware can I use?
Click to expand...
Click to collapse
me uno a esta peticion estoy en la misma situacion me gustaria que puedo colocarle a mi celular no puedo por OTA por que estoy fuera de estados unido y no me deja cambiar csc
modelo SM-G960U
número de serie R38K201DPVX
android 8.0.0
R16NW.G960USQU1ARBI

Quick question regarding flashing stock rom on AT&T

Maybe this is a dumb question, but my software version is SAOMC_SM-N975U-OYN-ATT-PP_0015, which firmware should I flash if I want unlocked but keep OTA updates? I know it's N975U but there's so many options regarding the CSC.

mfgh said:
Maybe this is a dumb question, but my software version is SAOMC_SM-N975U-OYN-ATT-PP_0015, which firmware should I flash if I want unlocked but keep OTA updates? I know it's N975U but there's so many options regarding the CSC.
Click to expand...
Click to collapse
Pretty sure it's still the U1 firmware your looking for and XAA for the CSC. The process is the same for converting a phone with carrier firmware on it (975U) to one with the purchased from Samsung unlocked firmware (N975U1).
Please note that flashing the U1 firmware (from the Samsung unlocked note 10+) does not network/sim unlock your phone if it is (or still is) locked to AT&T. Also when it comes time to have the phone unlocked by the carrier you will more then likely need to reinstall the carrier firmware. Also be aware of the bootloader version when flashing, as you can only flash firmware that has a bootloader version equal too (or higher) then what is currently on your phone. You can not downgrade bootloader versions (odin will throw an error if you try).
If you want carrier features be sure to flash the for AT&T. You can find that (and how to convert to U1 firmware) in the other thread your participating in under Guides/News/Discussions.
Link to firmware example:
https://www.sammobile.com/samsung/galaxy-note-10-plus/firmware/SM-N975U1/XAA/

Jai fait débloquer mon Samsung note 10plus en réseau je ne sais si je peux faire la mise à jour ?? Aide moi svp
Translated by GT: I had my Samsung note 10 plus unlocked in the network I don't know if I can update it?? Help me please