Related
Hello everyone, I have perhaps the biggest doubt. Why can i easily install the Gcam in the Stock version of the firmware by enabling the module; but if I install a GSI Rom and try to enable the module, does the default camera stop working? And even the possible Gcam to install does not work. Someone could tell me why? Truly I would be infinitely grateful!:fingers-crossed::fingers-crossed:
There are a couple of apps on google store that you can use to check if camera2 API is available/enabled on your phone, testing with gcam is questionable. I use ArrowOS and camera2 API is fully implemented. Try for example OpenCamera which definitely does camera2. Or FreeDcam on github.
celrau said:
There are a couple of apps on google store that you can use to check if camera2 API is available/enabled on your phone, testing with gcam is questionable. I use ArrowOS and camera2 API is fully implemented. Try for example OpenCamera which definitely does camera2. Or FreeDcam on github.
Click to expand...
Click to collapse
Thanks for your reply celrau, after installing the module, i checked if it was enabled with for example "manual camera compatibily test", and each string was enabled. but as i said, stock cam not work more, and neither any gcam. So i don't understand why. Have u ArrowOS in mi a2 lite mate?
YouKnowAirborne said:
Thanks for your reply celrau, after installing the module, i checked if it was enabled with for example "manual camera compatibily test", and each string was enabled. but as i said, stock cam not work more, and neither any gcam. So i don't understand why. Have u ArrowOS in mi a2 lite mate?
Click to expand...
Click to collapse
Yeah, MiA2 lite with ArrowOS. Most likely gcam not running has nothing to do with camera2, maybe it needs some libraries specific to stock or something. See if you can find some magisk module with gcam, maybe it helps.
celrau said:
Yeah, MiA2 lite with ArrowOS. Most likely gcam not running has nothing to do with camera2, maybe it needs some libraries specific to stock or something. See if you can find some magisk module with gcam, maybe it helps.
Click to expand...
Click to collapse
compatible modules unfortunately I have not found, maybe there will be something that does not go with the libraries as you say. But unfortunately about this, I understand little and nothing. unless someone tells me directly what I have to implement
Try searching miui 10 camera 2api, it has a full set of libs , but also has media files for ringtone ,user interface, maybe download and remove the media folder or replace the .oggs with your stock ones then magisk flash it
boe323 said:
Try searching miui 10 camera 2api, it has a full set of libs , but also has media files for ringtone ,user interface, maybe download and remove the media folder or replace the .oggs with your stock ones then magisk flash it
Click to expand...
Click to collapse
Thanks mate, i'll try it!
You can try editing your build.prop and add this line with the name of the app that you want to use the old API:
camera.hal1.packagelist=INSERT_YOUR_APP_PACKAGE_NAME HERE
ie.:
camera.hal1.packagelist=com.android.camera
I'm using the stock ROM now but I've used that method before on my old REDMI 4 PRIME Ressurection Remix ROM for some apps that wouldn't work with CAMERA2API.
EDITED TO ADD: You can also use the same ADB method to change the properties (root needed):
ie.:
adb shell
su
setprop camera.hal1.packagelist com.google.camera,com.skype.raider
Hope that helps!
BJumperBR said:
You can try editing your build.prop and add this line with the name of the app that you want to use the old API:
camera.hal1.packagelist=INSERT_YOUR_APP_PACKAGE_NAME HERE
ie.:
camera.hal1.packagelist=com.android.camera
I'm using the stock ROM now but I've used that method before on my old REDMI 4 PRIME Ressurection Remix ROM for some apps that wouldn't work with CAMERA2API.
EDITED TO ADD: You can also use the same ADB method to change the properties (root needed):
ie.:
adb shell
su
setprop camera.hal1.packagelist com.google.camera,com.skype.raider
Hope that helps!
Click to expand...
Click to collapse
Thanks a lot mate, i'll try this solution too!!
As we already know our phone doesn't support ARCore but there's a way to enable it on unsupported phones here: https://www.celsoazevedo.com/files/android/google-camera/ar/
Even tho I did what it said there I couldn't get it to work and every time I open an AR App or I try to open the Playground the app crashes. Did anyone manage to get this work on our device? If yes how?
Might work on custom ROMs but I'm interested in the stock PIE ROM.
Thanks!
Have the same problem. Did everything they said on the site. AR+ option enabled on pokemon go, but whenever I tried to use it, the screen went dark and crashes.
Would be nice if someone says that is able to use arcore right now in this phone. I wonder if it got patched
I know you said that you're interested in stock ROM, but that's the thread that pops up when people google anything related to ARCore and Mi A2 Lite, so I'm here to let everybody know that I got ARCore working on this phone using custom ROM called Pixel Experience. Every AR app I tried works except for Playgound. You can find it here on xda-developers. I couldn't reproduce these effects on stock ROM.
arcore enabler on magisk and voilá! (i recommend use the 1.5v zip file, the 1.6v crashes safety net!)
It doesn't work. Every time i open Playground app or any other AR app it crashes.
I did everything - Magisk+ arcoreenabler(both version 1.5 and 1.6) and installing Arcore and Playground app.
I'm on Pie stock.
Any help?
+1
I'm also trying to get ARCore working on my A2 Lite but still nothing... I want to install the Measure app, which needs ARCore, but every time I try to open, it crashes. Has anyone found a solution?
For a while I was able to run ARcore following these institutions, but at the time my device was on Android 8 but now after I have upgraded to Android 9 it doesn't work at all.
antonioaz23 said:
I'm also trying to get ARCore working on my A2 Lite but still nothing... I want to install the Measure app, which needs ARCore, but every time I try to open, it crashes. Has anyone found a solution?
Click to expand...
Click to collapse
Have you flashed via magisk the ArCore fix?
nikoman1987 said:
Have you flashed via magisk the ArCore fix?
Click to expand...
Click to collapse
Yes, I already tried that
antonioaz23 said:
Yes, I already tried that
Click to expand...
Click to collapse
Right now I'm using an GSI version of android 10 for our device and all AR apps including gcam playground are working fine(maybe a little bit laggy in playground camera, but maybe it depends on which version of gcam you are using) Maybe these days if i have some free time ,i'll reflash stock rom and look for a solution
nikoman1987 said:
Right now I'm using an GSI version of android 10 for our device and all AR apps including gcam playground are working fine(maybe a little bit laggy in playground camera, but maybe it depends on which version of gcam you are using) Maybe these days if i have some free time ,i'll reflash stock rom and look for a solution
Click to expand...
Click to collapse
I can confirm it
ax333l said:
I know you said that you're interested in stock ROM, but that's the thread that pops up when people google anything related to ARCore and Mi A2 Lite, so I'm here to let everybody know that I got ARCore working on this phone using custom ROM called Pixel Experience. Every AR app I tried works except for Playgound. You can find it here on xda-developers. I couldn't reproduce these effects on stock ROM.
Click to expand...
Click to collapse
I installed the pixel experience rom but it still didn't work.
Guys, I made it work at june 19. I forgot to share here. Everything relationed to ARcore was working, even playground. My response is in this thread for whoever got the same issue:
https://forum.xda-developers.com/mi-a2/help/arcore-support-mi-a2-t3900879
Hey there, I remember I had got ARCore working A2 Lite. After flashing the module through Magisk, you need to install the ARCore app from PlayStore from here : https://play.google.com/store/apps/details?id=com.google.ar.core
It should work afterwards, but Pokemon might not work, as they check for rooted/unlocked devices to prevent cheating.
marstonpear said:
Hey there, I remember I had got ARCore working A2 Lite. After flashing the module through Magisk, you need to install the ARCore app from PlayStore from here : https://play.google.com/store/apps/details?id=com.google.ar.core
It should work afterwards, but Pokemon might not work, as they check for rooted/unlocked devices to prevent cheating.
Click to expand...
Click to collapse
You just have to go to "magisk hide" inside magisk app and add pokemon go in there
Arcore is working!!!!!!!!
SnoopDoggyStyleDogg said:
As we already know our phone doesn't support ARCore but there's a way to enable it on unsupported phones here: https://www.celsoazevedo.com/files/android/google-camera/ar/
Even tho I did what it said there I couldn't get it to work and every time I open an AR App or I try to open the Playground the app crashes. Did anyone manage to get this work on our device? If yes how?
Might work on custom ROMs but I'm interested in the stock PIE ROM.
Thanks!
Click to expand...
Click to collapse
I installed ARCore on my mi a2 lite on my stock rom! Reply if you want to know how.
2 Konnie said:
I installed ARCore on my mi a2 lite on my stock rom! Reply if you want to know how.
Click to expand...
Click to collapse
"Reply if you want to know how." How?
Explaination
Fast Eagle said:
"Reply if you want to know how." How?
Click to expand...
Click to collapse
Ok, I'll explain it to you very simple. Tell me if you don't understand me or if you want an explaination with detail.
(Continue at your own risk. I don't have any responsibility for bricked devices in case you don't know what you are doing!!!)
1: Downgrate your android device to the latest version of android oreo(8.1.0).
2: Root your android.
3: Install Magisk Manager.
4: Download and install the magisk module "ArCore/Playground Patcher".
5: Use a terminal emulator to enable camera2 api.
6: Install google camera port for mi a2 lite (or mi a2 if your device is a mi a2).
Done! Now you can play any ar game or install ArStickers for Google Camera(Ar Stickers is an older version of Playground for android 8)
Warning: Google Camera may crash when you are in Video mode or Photo mode but everything else works (including ArStickers)
Also let me know if it worked.
Can someone help me fix GCAM crashes in MIUI?
I have installed the RN5 Camera Patch Module V2.034 by nhappymann through Magisk, Also I have Arnova8G2V3B1 as my GCAM.
Avatrient said:
Can someone help me fix GCAM crashes in MIUI?
I have installed the RN5 Camera Patch Module V2.034 by nhappymann through Magisk, Also I have Arnova8G2V3B1 as my GCAM.
Click to expand...
Click to collapse
How about enabling camera2 api first?
Plekst said:
How about enabling camera2 api first?
Click to expand...
Click to collapse
The patch already enables Camera2API
Avatrient said:
The patch already enables Camera2API
Click to expand...
Click to collapse
And yet it works fine for me with camera2 api enabled in build.prop, and it doesnt for you.
Gcam crash
Plekst said:
And yet it works fine for me with camera2 api enabled in build.prop, and it doesnt for you.
Click to expand...
Click to collapse
Yes I have this problem too!!!
And, even if my cam2api is enabled, evry gcam version I tried, the ones with night sight specially, v6, are giving me force crash on front cam!
Could be lack of rooting? I enabled cam2api by unlocking the bootloader only, without rooting my phone.
V5s of gcam are working, not fully, still problems with front cam not capturing anything, but no night sight.
Hi, I created this my first thread to know which Magisk modules you use with your Xiaomi mi a2 lite and then later maybe create a list of the best ones.
Mine are:
-HAL3 enabler - Camera2 Api support
-Youtube Vanced - Magisk Repo
-Viper4Android FX
-NotchKiller
- GPU Turbo Boost
Rboard themes, are gboard themes, very cool, i highly recommended.
Txatxiquesi said:
Rboard themes, are gboard themes, very cool, i highly recommended.
Click to expand...
Click to collapse
Other modules ??
I don't use gpu turbo since it didn't change the performance at all, I tried with the 3dmark test and the result was the exact same. I personally like System Accent Theme and Magisk Manager for Recovery Mode (just in case you install a module that makes your device bootloop).
Willy1992 said:
I don't use gpu turbo since it didn't change the performance at all, I tried with the 3dmark test and the result was the exact same. I personally like System Accent Theme and Magisk Manager for Recovery Mode (just in case you install a module that makes your device bootloop).
Click to expand...
Click to collapse
Do you need a custom recovery for magisk recovery module??
boe323 said:
Do you need a custom recovery for magisk recovery module??
Click to expand...
Click to collapse
You dont need a custom recovery for all the modules but for the last one I talk about it is esential since you use the terminal in the recovery mode to access this tool
Willy1992 said:
You dont need a custom recovery for all the modules but for the last one I talk about it is esential since you use the terminal in the recovery mode to access this tool
Click to expand...
Click to collapse
Ok thanks, do you know anything about magisk beta v19??, can it be installed as an update through magisk or do you need to completley remove magisk??, the new version no longer uses an image, its all mounted in data.
boe323 said:
Ok thanks, do you know anything about magisk beta v19??, can it be installed as an update through magisk or do you need to completley remove magisk??, the new version no longer uses an image, its all mounted in data.
Click to expand...
Click to collapse
I just heard of it today, it doesnt seem like you can install it from the magisk manager app (at least with the stable channel selected) as it doesnt show that there is an update but ill try to search for some more info in the future since in my opinion it may be early to install the update and magisk 18.1 works perfectly for me
Willy1992 said:
I just heard of it today, it doesnt seem like you can install it from the magisk manager app (at least with the stable channel selected) as it doesnt show that there is an update but ill try to search for some more info in the future since in my opinion it may be early to install the update and magisk 18.1 works perfectly for me
Click to expand...
Click to collapse
I think you need to change channels unless you have to go to the main site, i cant find anything on installing over traditional magisk.
I haven't rooted yet so haven't had a chance to check this but does anyone know if the ambient display gestures module work for a2 lite?
kingd421 said:
I haven't rooted yet so haven't had a chance to check this but does anyone know if the ambient display gestures module work for a2 lite?
Click to expand...
Click to collapse
I tested different ones in the past and none of them worked.
thorin0815 said:
I tested different ones in the past and none of them worked.
Click to expand...
Click to collapse
only one that works is AODEnabler, the version that installs it to product overlay, no gestures though, but it links into the phone always on display and all the animation is there between notifications, live wallpaper also works while showing the always on display.
I'm using the following modules:
- Advanced Charging Controller (acc)
- Busybox for Android NDK
- Daily Job Scheduler (djs) *it comes w/ acc*
- Universal GMS Doze
- ViPER4Android FX
- Youtube Vanced
Other note-worthy modules that I've used before:
- Energized Protection
- CloudflareDNS4Magisk
- CloudflareDNS4Magisk IPv6
elvinguitar said:
I'm using the following modules:
- Advanced Charging Controller (acc)
- Busybox for Android NDK
- Daily Job Scheduler (djs) *it comes w/ acc*
- Universal GMS Doze
- ViPER4Android FX
- Youtube Vanced
Other note-worthy modules that I've used before:
- Energized Protection
- CloudflareDNS4Magisk
- CloudflareDNS4Magisk IPv6
Click to expand...
Click to collapse
For some reason Busybox module breaks my data connection. If installed the mobile data is disconnected.
gkornaks said:
For some reason Busybox module breaks my data connection. If installed the mobile data is disconnected.
Click to expand...
Click to collapse
I didn't encounter that kind of issue.
My Magisk modules
- Busybox
- Systemless TZData
- F-Droid extension
- Debloater (v17 doesn't work with magisk 18)
- Riru/EdXposed
- mm
I use debloater so that services like Google Maps can be made non-system (possible to restrict) and to hide the launcher (Oreo recents).
I have EdXposed for no Google play games (stop annoying nag every time I start a game).
Mm let's me recover from magisk modules that boot loop. Boot into twrp and modules can be disabled.
I think Pix3lify (gives you them beautiful rounded corners and Pixel Blue accent colors) and QuickSwitch (lets you change your default launcher without breaking the recents, install Lawnchair v2 or OnePlus Launcher port by paphonb after that) are the must install modules on this device.
marstonpear said:
I think Pix3lify (gives you them beautiful rounded corners and Pixel Blue accent colors) and QuickSwitch (lets you change your default launcher without breaking the recents, install Lawnchair v2 or OnePlus Launcher port by paphonb after that) are the must install modules on this device.
Click to expand...
Click to collapse
Could you please give a link for the one plus launcher? I simply can't find it. Thanks in advance
hncdesilva said:
Could you please give a link for the one plus launcher? I simply can't find it. Thanks in advance
Click to expand...
Click to collapse
Here's the complete guide (link in guide): https://www.xda-developers.com/oneplus-launcher-recent-apps-interface-android-pie/
marstonpear
Click to expand...
Click to collapse
Txatxiquesi
Click to expand...
Click to collapse
Willy1992
Click to expand...
Click to collapse
at1291762
Click to expand...
Click to collapse
Will u guys mind very much adding links for d various modules u mentioned?
Thanks.
Hey guys, has anyone gotten Gpay to work on lineage 19.1? I have done the following and have had very odd results. Firstly, I am passing safteynet and my device is registered as play certified in Google play store. I'm seeing where sometimes gpay won't open at all and when it does it says it is unable to load my payment methods.
Specs:
OS - linageOS 19.1 (latest build as of this post)
GAPPS - Mindthegapps (latest build as of this post)
Steps taken:
Installed magisk, enabled zygisk and rebooted
Installed magisk hide props module then rebooted
Installed shamiko module then rebooted
Installed universal safteynet fix (zygisk) then rebooted
Configured denylist in magisk checking GPS (all), and Gpay (all) rebooted
Changed device fingerprint with magisk hide props module to a certified one then rebooted
Additional steps taken:
I cleared data from GPS, play store and Gpay and rebooted
I tried a different device fingerprint and rebooted (clearing data like above afterwards and rebooting again)
I have done a complete fresh install of my OS and tried again from scratch.
I also tried seeing is renaming magisk would help at all, it didn't
It appears I'm getting nowhere with this. If anyone has gotten it to work and has some insight it's be greatly appreciated!
Nevermind, looks like it was an issue from having the pixelify module installed as well. After I removed it it started working just fine.
deathblade said:
Nevermind, looks like it was an issue from having the pixelify module installed as well. After I removed it it started working just fine.
Click to expand...
Click to collapse
Hey deathblade!
Thanks for helping me out on the other thread.
Just wanted to check in, did you use the official build or the unofficial one with the Pixel Goodies? I'm intending/hoping to have full functionalities of Google Pay using the unofficial build, but from your post it seems that I can't have the Pixel experience if I want the ROM to work with Google Pay?
HW898 said:
Hey deathblade!
Thanks for helping me out on the other thread.
Just wanted to check in, did you use the official build or the unofficial one with the Pixel Goodies? I'm intending/hoping to have full functionalities of Google Pay using the unofficial build, but from your post it seems that I can't have the Pixel experience if I want the ROM to work with Google Pay?
Click to expand...
Click to collapse
I'm using the official build. I think the unofficial has everything needed to use Gpay and have some pixel things baked in. So might be worth a look in your case
deathblade said:
I'm using the official build. I think the unofficial has everything needed to use Gpay and have some pixel things baked in. So might be worth a look in your case
Click to expand...
Click to collapse
Aite, I will try out the unofficial one and see if GPay works there too. Thanks for the headsup!
HW898 said:
Aite, I will try out the unofficial one and see if GPay works there too. Thanks for the headsup!
Click to expand...
Click to collapse
I just remembered, the unofficial is setup to pass safteynet out the box, but more maybe needed for Gpay to work. Once you flash it try it out, if you run into issues I can provide what I did to get Gpay working
deathblade said:
Nevermind, looks like it was an issue from having the pixelify module installed as well. After I removed it it started working just fine.
Click to expand...
Click to collapse
Hi there, trying out the official build after experiencing some problems on the unofficial one. Any alternatives to pixiel-ing the ROM?
HW898 said:
Hi there, trying out the official build after experiencing some problems on the unofficial one. Any alternatives to pixiel-ing the ROM?
Click to expand...
Click to collapse
Not that I've found, however I did notice if you install the pixelify module then uninstall it, it does seem to leave some stuff behind. Like I still have the option to use Hold for me and direct my call. So it might work out where you can install it to get the things you want then remove it to get Gpay working
deathblade said:
Not that I've found, however I did notice if you install the pixelify module then uninstall it, it does seem to leave some stuff behind. Like I still have the option to use Hold for me and direct my call. So it might work out where you can install it to get the things you want then remove it to get Gpay working
Click to expand...
Click to collapse
I see... So these also means stuff like Now playing etc. will be gone too right?
Also, did you experience the problems I've faced in the unofficial build? sounds cannot change etc. as posted in main thread
HW898 said:
I see... So these also means stuff like Now playing etc. will be gone too right?
Also, did you experience the problems I've faced in the unofficial build? sounds cannot change etc. as posted in main thread
Click to expand...
Click to collapse
Nope now playing is still there. I really only used it the module to force call screening to show up. But I have pretty much everything I remember from stock plus a few phone related goodies. I never tried the unofficial build but on the official I do not have that issue
deathblade said:
Nope now playing is still there. I really only used it the module to force call screening to show up. But I have pretty much everything I remember from stock plus a few phone related goodies. I never tried the unofficial build but on the official I do not have that issue
Click to expand...
Click to collapse
I see... I will try installing the official one without magisk as I won't want to meddle with rooting stuff for now, will get back with results asap!
deathblade said:
Hey guys, has anyone gotten Gpay to work on lineage 19.1? I have done the following and have had very odd results. Firstly, I am passing safteynet and my device is registered as play certified in Google play store. I'm seeing where sometimes gpay won't open at all and when it does it says it is unable to load my payment methods.
Specs:
OS - linageOS 19.1 (latest build as of this post)
GAPPS - Mindthegapps (latest build as of this post)
Steps taken:
Installed magisk, enabled zygisk and rebooted
Installed magisk hide props module then rebooted
Installed shamiko module then rebooted
Installed universal safteynet fix (zygisk) then rebooted
Configured denylist in magisk checking GPS (all), and Gpay (all) rebooted
Changed device fingerprint with magisk hide props module to a certified one then rebooted
Additional steps taken:
I cleared data from GPS, play store and Gpay and rebooted
I tried a different device fingerprint and rebooted (clearing data like above afterwards and rebooting again)
I have done a complete fresh install of my OS and tried again from scratch.
I also tried seeing is renaming magisk would help at all, it didn't
It appears I'm getting nowhere with this. If anyone has gotten it to work and has some insight it's be greatly appreciated!
Click to expand...
Click to collapse
Just also wanted to clarify in the case I decide to install magisk, which module do you install exactly? All of them? Zygisk/hide props module/shamiko/universal safetynet fix?
HW898 said:
Just also wanted to clarify in the case I decide to install magisk, which module do you install exactly? All of them? Zygisk/hide props module/shamiko/universal safetynet fix?
Click to expand...
Click to collapse
Ok so here is the breakdown:
Zygisk is not a module, but an implementation method used by modules. Magiskhide props is used to change the device fingerprint to a valid one that registers as protected by google play. Shamiko is for hiding root from Google play services, and Gpay (and whatever other apps may need it). Universal safteynet fix is used to help pass google safteynet checks (security). Not listed is the pixelify module used to add pixel exclusive features but of course with it install it cause havoc on Gpay and other apps so once installed it should be uninstalled.
TLDR
Yes all of them
deathblade said:
Ok so here is the breakdown:
Zygisk is not a module, but an implementation method used by modules. Magiskhide props is used to change the device fingerprint to a valid one that registers as protected by google play. Shamiko is for hiding root from Google play services, and Gpay (and whatever other apps may need it). Universal safteynet fix is used to help pass google safteynet checks (security). Not listed is the pixelify module used to add pixel exclusive features but of course with it install it cause havoc on Gpay and other apps so once installed it should be uninstalled.
TLDR
Yes all of them
Click to expand...
Click to collapse
Aite thanks for the help mate! just installed but apparently, i couldn't find gapps despite sideloading it.. might have to reinstall again
Hmm safetynet fix seems to fail, can't pass cts profile.. any step by step guides by any chance?
deathblade said:
Ok so here is the breakdown:
Zygisk is not a module, but an implementation method used by modules. Magiskhide props is used to change the device fingerprint to a valid one that registers as protected by google play. Shamiko is for hiding root from Google play services, and Gpay (and whatever other apps may need it). Universal safteynet fix is used to help pass google safteynet checks (security). Not listed is the pixelify module used to add pixel exclusive features but of course with it install it cause havoc on Gpay and other apps so once installed it should be uninstalled.
TLDR
Yes all of them
Click to expand...
Click to collapse
HW898 said:
Hmm safetynet fix seems to fail, can't pass cts profile.. any step by step guides by any chance?
Click to expand...
Click to collapse
That's where magisk hide props comes in. I don't have a full guide that I know of but I could do a quick wtite up tomorrow for you
deathblade said:
That's where magisk hide props comes in. I don't have a full guide that I know of but I could do a quick wtite up tomorrow for you
Click to expand...
Click to collapse
I got it working after following a guide~
Unfortunately features like now playing isn't working. the rest is pretty much okay tho
HW898 said:
I got it working after following a guide~
Unfortunately features like now playing isn't working. the rest is pretty much okay tho
Click to expand...
Click to collapse
You install the pixelify module? Also can you explain how it's not working?
deathblade said:
You install the pixelify module? Also can you explain how it's not working?
Click to expand...
Click to collapse
Nope, I didn't. Other than the modules to hide from banking apps as mentioned above, I installed a pixel launch module here to make it for pixel-like: https://forum.xda-developers.com/t/app-mod-pixel-launcher.4442077/
Other than that nothing else.
It doesn't;t work in the sense that it does not pick up music, even popular ones. The settings are there though, I can see them. It just doesn't identify any songs
HW898 said:
Nope, I didn't. Other than the modules to hide from banking apps as mentioned above, I installed a pixel launch module here to make it for pixel-like: https://forum.xda-developers.com/t/app-mod-pixel-launcher.4442077/
Other than that nothing else.
It doesn't;t work in the sense that it does not pick up music, even popular ones. The settings are there though, I can see them. It just doesn't identify any songs
Click to expand...
Click to collapse
This is the pixelify module I installed then removed, you can give it a try.
GitHub - Kingsman44/Pixelify: Magisk module to enables pixel exclusive features and ui
Magisk module to enables pixel exclusive features and ui - GitHub - Kingsman44/Pixelify: Magisk module to enables pixel exclusive features and ui
github.com