Good day, please can some help if possible.
I have a car unit with a boot issue, and the place who makes them has them made in China as I can tell, but they dont know who can give me the software to flash again.
The unit is in boot loop, or similar and just starts up, then nothing on screen.
Please help me, I used to be very good at this but haven't been here for ages and not familiar with the new units.
slide200sx said:
Good day, please can some help if possible.
I have a car unit with a boot issue, and the place who makes them has them made in China as I can tell, but they dont know who can give me the software to flash again.
The unit is in boot loop, or similar and just starts up, then nothing on screen.
Please help me, I used to be very good at this but haven't been here for ages and not familiar with the new units.
Click to expand...
Click to collapse
Hi,
Is it px3,px5?
Can you get wit reset buton (if theres one) in bootscreen?
If you don,t know wich hardware it,s just try to put on diverent android image on sd card in gps slot
Diablo-2u said:
Hi,
Is it px3,px5?
Can you get wit reset buton (if theres one) in bootscreen?
If you don,t know wich hardware it,s just try to put on diverent android image on sd card in gps slot
Click to expand...
Click to collapse
Hi, I dont know model as the unit was not working when I got the unit.
I am not even sure what image to use on sd card, or I would try it already, I only know Dixon make this unit.
slide200sx said:
Hi, I dont know model as the unit was not working when I got the unit.
I am not even sure what image to use on sd card, or I would try it already, I only know Dixon make this unit.
Click to expand...
Click to collapse
Is there a reset hole/button? If so put a pin in it and hold long enough and push and hold on button.
You can also check the hardware inside(the chip types)
Make sure there is no sd card in the sd slot with wrong software because it auto loads when start up.
Diablo-2u said:
Is there a reset hole/button? If so put a pin in it and hold long enough and push and hold on button.
You can also check the hardware inside(the chip types)
Make sure there is no sd card in the sd slot with wrong software because it auto loads when start up.
Click to expand...
Click to collapse
Hello yes, there is a reset button, and I have used it, long press / hold, with no help.
I only get the loading screen, then the touch settings screen, after touching, then next screen black for ever again.
I have the unit open, but a silver cover over the Chip / main area on main board.
Please help me and thank you so far for everything
Picture of inside of unit
Diablo-2u said:
Is there a reset hole/button? If so put a pin in it and hold long enough and push and hold on button.
You can also check the hardware inside(the chip types)
Make sure there is no sd card in the sd slot with wrong software because it auto loads when start up.
Click to expand...
Click to collapse
Please see picture above for the inside view.
I have no idea what to flash on to this unit, any help is appreciated.
Related
I cooked a ROM in lumpistefans kitchen, dowloaded it to my doc's on P.C but when I click install all I get is a Black box for a second, then nothing. Is this because it downloads in dos? if so, what do I do?( sorry, I'm a bit thick when it comes to computers etc.!)
I've also sinc'd it onto xda, but still can't install.
Any ideas?
Thanks in advance, guys.
Silent D
If you want the best method of doing it, which has always worked for me, go get the new version of XDATools with the bootloader.
Download the rom from the Kitchen as an .nb1 file. Grab an SD card (32MB of greater) that you can format. Use the tools to write the rom to the SD card with the bootloader.
Put the SD card into the XDA and then just power it back on. It should ask you if you want to flash the device. Just click yes to flash the device.
Maybe you need to unzip the file then try install.
Thanks ed207_us that was a great help, I managed to install using my card though twice I also installed direct from pc to xda.
:? :? I have successfully installed 4 different cooked roms plus xda developers rom but STILL it doesn't power up outside of the cradle.
All external buttons, and all functions work in cradle, but when removed, green LED will flash for a while, then stops.
If I try to opperate phone out of cradle I can do a few functions/opperations but it crashes (No LEDs at all)
When I've installed a cooked rom I have followed instruction to do a hard reset, but it won't start up again if I press after 60 sec's. I have to put xda back in cradle.
Also when installing new rom there is no message saying that the old rom is being removed, should there be?
Is there a way to remove the previous rom before new one is installed? as I'm sure the problem with the locked buttons must have something to do with the original O2 rom( :roll: though I am only a very green Newbie, so I don't really know D*ck).
I'm getting T'd off with this now and am beginning to think that my xda is totally shot, so any more ideas would be most greatfully received.
Thanks guys
Silent D
Silent D said:
:All external buttons, and all functions work in cradle, but when removed, green LED will flash for a while, then stops.
If I try to opperate phone out of cradle I can do a few functions/opperations but it crashes (No LEDs at all)
Click to expand...
Click to collapse
I've never faced anything like this.
But I wonder is that is not linked to your battery being damaged, old, or out of order. If is works when connected and stops when removed.
What shows you battery power gauge when removed from the cradle ?
Thanks tanguy
Battery is ok I think as the power bar shows 100%.
Silent D
well a battery can still be defect even if it display itself as 100%
i mean if the battery is damaged so it think that it's full but full being
that it have 60sec of power
I think it has to be the battery as well. There is no message saying the old rom has been removed and it is not like a PC OS where you have to format the old OS or anything. You just flash the whole unit at one time.
You should probably send out the unit to be repaired under warranty
OK,fair comment, but why the problem with the external buttons, and the inability to restart using the hard reset button?
cheers guys
Silent D
:roll: Sorry just answered the second part myself, if there's a problem with the battery the battery switch might not work....Duhhhh :lol:
Silent D
Hi guys
Tried to install the following upgrade:
MagicianRadio_1.13.00_maupgrade,
but failed miserably. MDA crashed completely. The only thing the display shows is the text "serial V1.00" or "USB V1.00" depending on the presence of a USB cable...
What can I do? The thing won't even reset, and I tried both soft and hard reset. Or is there another way to reset?
Will it help if I wait until the battery runs out?
Any help is very welcome!
Find someone ntrw'ing his ROM from SD to hard disk, send it to you and then you ntrw it back onto your SD and the reboot and "press power to flash"
Chatty said:
Find someone ntrw'ing his ROM from SD to hard disk, send it to you and then you ntrw it back onto your SD and the reboot and "press power to flash"
Click to expand...
Click to collapse
Thanks Chatty, but sorry, I don't understand "ntrw".
And are you saying that the MDA will boot from the ScanDisk Card? Like a bootdisk for a pc?
I have some more information now:
Every now and then this text "Serial" or "USB" disappears. When this happens and I switch on the MDA, it reboots, like when I first got it. But then without completing the boot, the screen switches to black again with the text "serial" or "USB".
I'd appreciate your help.
If you'd dare to use this board's search function you'd know by now that ntrw is a program to read/write SD cards on a low level.
And you don't boot from SD card - it just contains a ROM if you were following my 'guide'. The bootloader from your PDA is able to read that format and flash it´to your chips holding the ROM. Please do some reading first... it's stupid to write the same stuff over and over again.
You're right.
I use other forums and hate it when people do this. I'm actally quite surprised I do it myself now...
I suppose it feels like the most logical thing to do when something tries to help out: to ask the same person what it is s/he means. Doesn't make it right though.
Anyway, back to the point.
I got it to work in the end without any SD or whatever. I can't really put my finger to what went wrong at first, but it works now, so i'm glad.
Does anybody know if there is a way to boot N560 using SD card? I think I killed my FS with some "rom killer" and all I get now is FS boot screen, no other activities.
Any way to start it from SD card and flash it from there?
Perhaps any other way to bring it back to life?
i have the same problem
is there anybody for help???
SOS please
Eenigmaa said:
Does anybody know if there is a way to boot N560 using SD card? I think I killed my FS with some "rom killer" and all I get now is FS boot screen, no other activities.
Any way to start it from SD card and flash it from there?
Perhaps any other way to bring it back to life?
Click to expand...
Click to collapse
You cannot burn the ROM from an SD card.
If the device has had the anti-theft password set at some stage then you cannot reburn the ROM! This might be the problem?
A hard reset on the N560 followed by running the Loox burn program on a PC with ActiveSync connection to the N560 cradle is the only answer i.e. a normal ROM burn.
fingerstoo said:
You cannot burn the ROM from an SD card.
If the device has had the anti-theft password set at some stage then you cannot reburn the ROM! This might be the problem?
A hard reset on the N560 followed by running the Loox burn program on a PC with ActiveSync connection to the N560 cradle is the only answer i.e. a normal ROM burn.
Click to expand...
Click to collapse
Theft protection is not a problem here. It was wrong ROM and now it is stuck on boot screen, active sync does not see it at all, maybe there is a trick to somehow anable burn, flash, service mode on it? So far nothing helps....
Eenigmaa said:
Theft protection is not a problem here. It was wrong ROM and now it is stuck on boot screen, active sync does not see it at all, maybe there is a trick to somehow anable burn, flash, service mode on it? So far nothing helps....
Click to expand...
Click to collapse
read, and pay attention here:
[email protected]@p://a.mod-site.net/gb/u/newplow-1.html
POST 203.
Edit/Delete Message
vladtapes said:
read, and pay attention here:
[email protected]@p://a.mod-site.net/gb/u/newplow-1.html
POST 203.
Edit/Delete Message
Click to expand...
Click to collapse
GREAT!!!!
Thanks ever so much! You are real HELP!!!!
You should close process "wcescomm.exe" on PC in task manager. Then hold button record, power and puch reset after that you will come in boot loader. Run the program mtty.1.42 and select usb connect. If You will see the any error just start again mtty. Put command l c:\os_213u.nbf (You should put correct flash file in c:\ or use correct path to os_213u.nbf, l - like L but small). When it will done You should start PocketLOOX5xxFlashTool.exe and flash you PDA.
Click to expand...
Click to collapse
Eenigmaa said:
GREAT!!!!
Thanks ever so much! You are real HELP!!!!
Click to expand...
Click to collapse
do you confirm the method is fully functional?
I made a backup of my german original rom, if i have problems i want to restore it...
have you got a backup of your old wm5?
thanks
Yes it is working! Even if error comes at the end, shut the appie and use FS update tool to finish it up! All perfect!
Google for WM5, it is somwhere out there!
Eenigmaa said:
Yes it is working! Even if error comes at the end, shut the appie and use FS update tool to finish it up! All perfect!
Google for WM5, it is somwhere out there!
Click to expand...
Click to collapse
could you please p.m. to me the link of wm5 other language?
If you refer 4pda...it can't be downloaded, i don't know russian, i registered, but always cannot download...
if you have other link...pls send me...
vladtapes said:
could you please p.m. to me the link of wm5 other language?
If you refer 4pda...it can't be downloaded, i don't know russian, i registered, but always cannot download...
if you have other link...pls send me...
Click to expand...
Click to collapse
You can if you use an translator like www.windowslivetranslator.com or translate.google.com
then it is pretty easy.
I've resolved...
Fully functional WM6.0 newplowe in English...
now I'm searching for editing it in Italian/French but I need to edit the rom part of the XIP (just that).
For doing that, I need to open decrypt the file .nbh file (don't really know howto, and newplow doesn't answer about that... ).
Hi everybody, I need your help. I spent 2 hours to read several posts about N560 brick recover, and I still can't figure how to do it.
I flashed the N560 with the WM 6.1 and then I tried to flash the backup Rom Image ... which failed. Now is stucked in the climbing image ... and is not reacting to nothing. I didn't try the mitty sol because I don't have a clear ideea about using it, I am still a newbie ...
Please, I am begging for help if you can , thanks
rcretu said:
Hi everybody, I need your help. I spent 2 hours to read several posts about N560 brick recover, and I still can't figure how to do it.
I flashed the N560 with the WM 6.1 and then I tried to flash the backup Rom Image ... which failed. Now is stucked in the climbing image ... and is not reacting to nothing. I didn't try the mitty sol because I don't have a clear ideea about using it, I am still a newbie ...
Please, I am begging for help if you can , thanks
Click to expand...
Click to collapse
Try this?
Take the N560 off the cradle. Remove the battery for at least 30 seconds. Reinsert battery and back cover. Do not worry if the screen shows the dolphins again. Do a full hard reset to get back to factory setting i.e Simultaneously press and hold the Suspend/Resume button (1) and the Calendar application button (2). Briefly press the stylus tip into the soft reset opening (3). Continue to hold down the Suspend/Resume button and the Calendar application button for a few seconds. The reset can take a few minutes. At the end an acoustic signal sounds. Please follow the further instructions on the display.
A hard reset should put the device back to the existing (last burned ROM) and you can try the burn again.
You probably do not know why the burn originally failed. The most common reason is some interrupt of the processor (internet access, switch of all internet access) but more likely something is polling the USB port, which might be shared in the PC. My external USB TV tuner constantly polls the USB port and interrupts any transfers on other ports! I suggest that you disconnect all other USB devices and make sure that your N560 cradle is connected to a USB port directly on the motherboard of the PC (not a USB hub or expansion card with multiple USB ports).
Hope this helps.
N560 - still stucked in the climbers bagground after WM 6.1 flash
fingerstoo said:
Try this?
Take the N560 off the cradle. Remove the battery for at least 30 seconds. Reinsert battery and back cover. Do not worry if the screen shows the dolphins again. Do a full hard reset to get back to factory setting i.e Simultaneously press and hold the Suspend/Resume button (1) and the Calendar application button (2). Briefly press the stylus tip into the soft reset opening (3). Continue to hold down the Suspend/Resume button and the Calendar application button for a few seconds. The reset can take a few minutes. At the end an acoustic signal sounds. Please follow the further instructions on the display.
A hard reset should put the device back to the existing (last burned ROM) and you can try the burn again again.
You probably do not know why the burn originally failed. The most common reason is some interrupt of the processor (internet access, switch of all internet access) but more likely something is polling the USB port, which might be shared in the PC. My external USB TV tuner constantly polls the USB port and interrupts any transfers on other ports! I suggest that you disconnect all other USB devices and make sure that your N560 cradle is connected to a USB port directly on the motherboard of the PC (not a USB hub or expansion card with multiple USB ports).
Hope this helps.
Click to expand...
Click to collapse
Hi and thanks a lot for your post ... I tried several times this procedure ... I see no change for the hard reset .. No dolphins image at all ... I would say whatever I do it doesn't affect it. No sound, no other signs ... same climbing image.... Please keep remember other solution, It should be one ... thank you again ...
rcretu said:
Hi and thanks a lot for your post ... I tried several times this procedure ... I see no change for the hard reset .. No dolphins image at all ... I would say whatever I do it doesn't affect it. No sound, no other signs ... same climbing image.... Please keep remember other solution, It should be one ... thank you again ...
Click to expand...
Click to collapse
THANKS FOR HELP, I didn't made correctly the the procedure ... now all it's Fine ... really appreciate your help ... saved my precious loox ...
rcretu said:
THANKS FOR HELP, I didn't made correctly the the procedure ... now all it's Fine ... really appreciate your help ... saved my precious loox ...
Click to expand...
Click to collapse
PHEW! Thank goodness. I suspect you did not do the hard reset correctly at first. But I agree about the Loox being precious! I look after mine very carefully! Glad I could help you. My pleasure....
My fs560 is brikked!!!!
It remains to climbing people...
I can enter to bootloader (dolphins) but i cannot update to Windows mobile 6.1 Classic ver. 063.07
I need your HELP!!
I tried to use mtty and i can arrive to:
Image Download Finish
OEMFlashWrite(A0000000h,8C200000h,0236002Ah)
Download Fails !!!
OEMFlashWrite error(12)
Error : DownloadImage return error (code = 0xFFFFFFFF)
but then I cannot initialize normal update, it remains to dolphins with the blue bar fullfilled by precedent mtty...
the PocketLOOXN560FlashTool.exe can't find the device...
Can someone explain me the CORRECT method after mtty?
PLEASEE!!!
vladtapes said:
My fs560 is brikked!!!!
It remains to climbing people...
I can enter to bootloader (dolphins) but i cannot update to Windows mobile 6.1 Classic ver. 063.07
I need your HELP!!
I tried to use mtty and i can arrive to:
Image Download Finish
OEMFlashWrite(A0000000h,8C200000h,0236002Ah)
Download Fails !!!
OEMFlashWrite error(12)
Error : DownloadImage return error (code = 0xFFFFFFFF)
but then I cannot initialize normal update, it remains to dolphins with the blue bar fullfilled by precedent mtty...
the PocketLOOXN560FlashTool.exe can't find the device...
Can someone explain me the CORRECT method after mtty?
PLEASEE!!!
Click to expand...
Click to collapse
I think you have received a reply from Newplow on his guestbook....
Hi
I tried to upgrade to 128mb but after restart I see only climbing. I tried everything here but on dolphins afterr line is blue it is finished. that I am unpluging device. starting looxflastool for 560 and first is trying to connect by active sync and that when no connection made I see dolphins on left screen of flash tool window. than I am pluging again and after couple secs I see that: Error"The language in this Flash Image update (ENGLISH) differs from that on your device. I tried to change rom on every language but not working as well. PLEASE HELP!!
if that helps than i will add than on top when delfins i see on 560 is two lines. first is typed 2.14.G4 on second directly below is 2.15.
and when mtty 1.42 finishing flashing i see following:
Image Download Finish
OEMFlashWrite(A0000000h,8C200000h,0224002Ah)
Download Fails !!!
OEMFlashWrite error(12)
Error : DownloadImage return error (code = 0xFFFFFFFF)
I've done already procedure You've mentioned here with taking of the battery for at least 30 secs with hard reset afterwards but it is still climibing screen. Can U manage this as well???
THX
The most common error with the procedure is NOT making a proper or true hard reset, or back to factory settings reset. If you do it wrong, you will only achieve a soft reset, the same as you get if you just put the stylus in the reset hole in the base of the N560.
The correct procedure is to hold Power/Resume/Suspend button (on/off button) and the Calendar button simultaneously. Keep holding them and with the other hand press in the reset hole with the stylus. The screen should blank out. KEEP holding the other two buttons all this time, and release the stylus. KEEP holding those two buttons until the screen display returns, only then release them.
This should allow another burn.
I hope this is the problem. It has happened to me and others, so I think I am right. But if this fails, you may need another approach.
I recently purchased two M88 Miphones from China (Windows Mobile 6.0 version). Both were supposed to be in English but when they were shipped to me, one was in English and the other Spanish. How can I change the language from Spanish to English? Or maybe I can install an entirely new English version of Windows Mobile 6.0? Can I extract the ROM from the English one and use it for the other (Spanish) one? Please help. Thanks.
It's great to find a way to install or restore the Windows on M88. My one just died. I haven't access to anything but the "phone" functions, so i need to restore it somehow from my PC. Some advices?
snakemountain said:
I recently purchased two M88 Miphones from China (Windows Mobile 6.0 version). Both were supposed to be in English but when they were shipped to me, one was in English and the other Spanish. How can I change the language from Spanish to English? Or maybe I can install an entirely new English version of Windows Mobile 6.0? Can I extract the ROM from the English one and use it for the other (Spanish) one? Please help. Thanks.
Click to expand...
Click to collapse
Hi, I think there is a way to change your Windows to English. I received the same phone with the same problem. I wrote to the supplier and they respond with the decision: they provided the original english WM6 ROM for M88 MiPhone on the website, so you can download it from here: http://rapidshare.com/files/168534489/DX.SKU16783.UPDATE.ENGLISH.AUG01.rar
But my problem is that I can't go in to the bootloader mode - just don't know how so to start loading the Windows OS. The instructions on the site are very poor and don't work. So I'm stuck again. Here there are the instructions:
"English OS System 20080801 Edition (ROM image) available for download
- To update ROM, format your TF card with FAT32 and unzip all files and folders from the downloaded file into the root folder of the TF card. Then, restart the phone to begin updating. This update converts all non-English versions of this phone into English version."
And some more instructions from my correspondence with the supplier, which shows different way of putting the phone in to the bootloader mode:
"we have a better idea to solve this inconvenience for you
we had updated a file on our website for you
you can download it and put it in your memory card to update the language into English.
you can put the file in the memory card no need to creat a folder for it
and insert the card into your cellphone
press the power bottom and the home bottom together
a few second later there would be a message on the screen shows you can press the home bottom again to restart the cellphone"
So maybe you can see they are showing different ways to enter the boot loader. Neidher 2 of them are working for me.
Since I have this phone I didn't find a way to enter the bootloader mode! I tried every combination between the keys but NOTHING! The only thing what I can do with the buttons is SWITCH OFF, SOFT RESET AND HARD RESET.
Please if somebody discover how to do that on that phone -M88 to share here with the rest of us!
Best of luck!
teddy_irish said:
Hi, I think there is a way to change your Windows to English. I received the same phone with the same problem. I wrote to the supplier and they respond with the decision: they provided the original english WM6 ROM for M88 MiPhone on the website, so you can download it from here: http://rapidshare.com/files/168534489/DX.SKU16783.UPDATE.ENGLISH.AUG01.rar
But my problem is that I can't go in to the bootloader mode - just don't know how so to start loading the Windows OS. The instructions on the site are very poor and don't work. So I'm stuck again. Here there are the instructions:
"English OS System 20080801 Edition (ROM image) available for download
- To update ROM, format your TF card with FAT32 and unzip all files and folders from the downloaded file into the root folder of the TF card. Then, restart the phone to begin updating. This update converts all non-English versions of this phone into English version."
And some more instructions from my correspondence with the supplier, which shows different way of putting the phone in to the bootloader mode:
"we have a better idea to solve this inconvenience for you
we had updated a file on our website for you
you can download it and put it in your memory card to update the language into English.
you can put the file in the memory card no need to creat a folder for it
and insert the card into your cellphone
press the power bottom and the home bottom together
a few second later there would be a message on the screen shows you can press the home bottom again to restart the cellphone"
So maybe you can see they are showing different ways to enter the boot loader. Neidher 2 of them are working for me.
Since I have this phone I didn't find a way to enter the bootloader mode! I tried every combination between the keys but NOTHING! The only thing what I can do with the buttons is SWITCH OFF, SOFT RESET AND HARD RESET.
Please if somebody discover how to do that on that phone -M88 to share here with the rest of us!
Best of luck!
Click to expand...
Click to collapse
Hi, I'm From Brazil
I'm selling this phone here in my country.
I think I've got same problem here. But I've tried to get bootscren and it seems to be that procedure correct.
Once you shutdown the phone first remove it battery for 10 seconds, and than put back into the phone. Than press power and home(that center buttom) until phone show 2 messages(one for master boot and other for clear boot).
After this message you may release power buttom and keep pressing home buttom untill phone shows it boot screen.
You will face a "downloading program, please wait" message on phone screem
But be extremelly carefull than, make sure you have a power cable attached to the phone and it battery at least 90% charged because update took lot of time sometimes.
I'm telling that because today I have one M88 "dead" in my hands because I did not followed all this procedure and after 35 minutes, by mystake I pressed reset buttom.
Now my phone not even turns on, nor charge it battery, is dead.
But I think using one of those "BOX" devices I will ressucitate it!
Thanks m8!
The thing is that when I press the 2 buttons at once I can only get blue screen for less than 1 second and after that Windows is loading. When it is done - the phone is after hard reset. I've tried hundreds of times - always the same. I can't get messages asking me to load software - only hard reset is the result. I've tried any other combination, including the reset buton under the cover, next to USB, but never managed to enter the service mode or boot mode or whatever it is.
One week I'm wasting my time in doing hundreds of attemts to enter the bootloader and nothing! How then do you make a hard reset on the M88?
Do you thing if I can use backup from english version of the same model that will change the situation - the spanish will be substituted by english? And if it's possible can you upload such a backup, made by Spb backup software for me, please?
Best regards
I have stupid problem. Some files disappeared, some programs stopped working and the entire system blocked. I made many soft and hard resets, which fixed the things... for a while. After one hour it's blocking again, without any settings, or interventions.
I downloaded the ROM, created a "root" folder in the card and unzipped everything there.
The thing is that it ROM-boot looks too fast - only couple of minutes. Can it be?
teddy_irish said:
Thanks m8!
The thing is that when I press the 2 buttons at once I can only get blue screen for less than 1 second and after that Windows is loading. When it is done - the phone is after hard reset. I've tried hundreds of times - always the same. I can't get messages asking me to load software - only hard reset is the result. I've tried any other combination, including the reset buton under the cover, next to USB, but never managed to enter the service mode or boot mode or whatever it is.
One week I'm wasting my time in doing hundreds of attemts to enter the bootloader and nothing! How then do you make a hard reset on the M88?
Do you thing if I can use backup from english version of the same model that will change the situation - the spanish will be substituted by english? And if it's possible can you upload such a backup, made by Spb backup software for me, please?
Best regards
Click to expand...
Click to collapse
I think I can do that,
but in one and half week because I'm still waiting for the flashing box and their cables.
Once I get I will upload it here.
ZEMONTI said:
I have stupid problem. Some files disappeared, some programs stopped working and the entire system blocked. I made many soft and hard resets, which fixed the things... for a while. After one hour it's blocking again, without any settings, or interventions.
I downloaded the ROM, created a "root" folder in the card and unzipped everything there.
The thing is that it ROM-boot looks too fast - only couple of minutes. Can it be?
Click to expand...
Click to collapse
Go ahead
But be pretty calm when performing update or you gonna get a bricked phone.
But is it possible that the update takes only few minutes? Or i'm doing only hard reset?
It is possible the update to take only few minutes
ZEMONTI said:
But is it possible that the update takes only few minutes? Or i'm doing only hard reset?
Click to expand...
Click to collapse
Hi from Ireland!
Yes it's possible. Today I finally managed to make the update - it took only 3 minutes. Now I have English OS on my M88!
It's a really nice phone isn't it?
Regards
teddy_irish said:
Hi from Ireland!
Yes it's possible. Today I finally managed to make the update - it took only 3 minutes. Now I have English OS on my M88!
It's a really nice phone isn't it?
Regards
Click to expand...
Click to collapse
That's good news!
Yes It is!
How to install WM6 ROM - English version on M88 MiPhone from SD card
Please download the original ROM from here
I was adwised to do this:
1. Duplicate the update.img file and rename the second one as "uploader"
2. Copy both "update.img" and "uploader" on the SD - formatted in FAT32
3. Press POWER and HOME butons at the same time.
4. There are two possible options from here:
a) White screen with blue text showing "Upload image... please wait..."
b) Red screen with the options what to do in the next step -
5. I saw first the a) option - the white screen. So after 3 minutes of waiting the phone said it is done and it will selfrestart.
After the restart it will load the English OS on your M88
Enjoy
the mine is dead too.
stenatay said:
hi, i'm from brazil
i'm selling this phone here in my country.
I think i've got same problem here. But i've tried to get bootscren and it seems to be that procedure correct.
Once you shutdown the phone first remove it battery for 10 seconds, and than put back into the phone. Than press power and home(that center buttom) until phone show 2 messages(one for master boot and other for clear boot).
After this message you may release power buttom and keep pressing home buttom untill phone shows it boot screen.
You will face a "downloading program, please wait" message on phone screem
but be extremelly carefull than, make sure you have a power cable attached to the phone and it battery at least 90% charged because update took lot of time sometimes.
I'm telling that because today i have one m88 "dead" in my hands because i did not followed all this procedure and after 35 minutes, by mystake i pressed reset buttom.
Now my phone not even turns on, nor charge it battery, is dead.
But i think using one of those "box" devices i will ressucitate it!
Click to expand...
Click to collapse
i am passing through the same. What do you mean with box. I need to ressuciatate it
please.
[email protected]/ [email protected]
helllp
stenatay said:
hi, i'm from brazil
i'm selling this phone here in my country.
I think i've got same problem here. But i've tried to get bootscren and it seems to be that procedure correct.
Once you shutdown the phone first remove it battery for 10 seconds, and than put back into the phone. Than press power and home(that center buttom) until phone show 2 messages(one for master boot and other for clear boot).
After this message you may release power buttom and keep pressing home buttom untill phone shows it boot screen.
You will face a "downloading program, please wait" message on phone screem
but be extremelly carefull than, make sure you have a power cable attached to the phone and it battery at least 90% charged because update took lot of time sometimes.
I'm telling that because today i have one m88 "dead" in my hands because i did not followed all this procedure and after 35 minutes, by mystake i pressed reset buttom.
Now my phone not even turns on, nor charge it battery, is dead.
But i think using one of those "box" devices i will ressucitate it!
Click to expand...
Click to collapse
help me, the mine is dead.
how per-say?
teddy_irish said:
Hi from Ireland!
Yes it's possible. Today I finally managed to make the update - it took only 3 minutes. Now I have English OS on my M88!
It's a really nice phone isn't it?
Regards
Click to expand...
Click to collapse
how persay did u get past the blue screen?
hello I am of chili and my m88 non reconose the card of cellular neither the icon of the cellular one needs urgent operative elsistema and the program and naturally like one makes before hand thank you
Hello every one,
I have this phone too, I trying to find any way or a cab to send the audio from the Fm radio app to the bluetooth headset, but no progrees, it only works with the original eraphones,
Any one have an a idea woh to do it?,
Regsards.
Javier.
jaguerra said:
Hello every one,
I have this phone too, I trying to find any way or a cab to send the audio from the Fm radio app to the bluetooth headset, but no progrees, it only works with the original eraphones,
Any one have an a idea woh to do it?,
Regsards.
Javier.
Click to expand...
Click to collapse
Me too. I was intending to lessen some audio-books.
Does it requires some additional software?
so how did it go and whats the name of the box i need one kinda kill my phone as well
please give info if u have it
M88 english bootloader
Here is the fix, sponsored by wirelessandmorestore.com
Copy both of these files to your computer.
http://uploading.com/files/YE6JJ36Y/update.img.html
http://uploading.com/files/TA1N0MBA/uploader.img.html
Plug in your phone and copy them to the SD card.
Turn the phone off.
Press the button on the top and the round button on the face at the same time and continue to hold it. As you are holding it, the phone will turn and go thorugh a couple steps before it says something like 'downloading image' or 'updating image' something like that.
Once it gets to that screen, you can let go of the buttons and the phone will update and reboot. This will take a couple of minutes. It will be in English when it turns itself back on and loads Windows.
English OS System 20080801 Edition (ROM image) for M88 MiPhone
Please download from here
If somebody knows how to enter the bootloader mode of this phone please share here with us!
Here is the instruction for this procedure from the supplier which is nor working for me:
"English OS System 20080801 Edition (ROM image) available for download
- To update ROM, format your TF card with FAT32 and unzip all files and folders from the downloaded file into the root folder of the TF card. Then, restart the phone to begin updating. This update converts all non-English versions of this phone into English version."
If somebody can manage to install the ROM please write here the steps!
Thanks!
You can get to the flash update by pressing RESET, MENU, and POWER all at the same time, then release RESET first and wait for a message. The message will tell you to release POWER to do a hard-reset or MENU to do a flash update. In this case, you will release MENU first, then you will get a message asking if you want to update from SD. At this point, none of the buttons do anything so I assume you have to tap the touchscreen. My touchscreen is broken so I couldn't get any further than this.
Problem Fixed!
GnatGoSplat said:
You can get to the flash update by pressing RESET, MENU, and POWER all at the same time, then release RESET first and wait for a message. The message will tell you to release POWER to do a hard-reset or MENU to do a flash update. In this case, you will release MENU first, then you will get a message asking if you want to update from SD. At this point, none of the buttons do anything so I assume you have to tap the touchscreen. My touchscreen is broken so I couldn't get any further than this.
Click to expand...
Click to collapse
Thanks for your help, m8. It didn't work that way for me. I was adwised to do this:
1. Duplicate the update.img file and rename the second one as "uploader"
2. Copy both "update.img" and "uploader" on the SD - formatted in FAT32
3. Press POWER and HOME butons at the same time.
4. There are two possible options from here:
a) White screen with blue text showing "Upload image... please wait..."
b) Red screen with the options what to do in the next step -
5. I saw first the a) option - the white screen. So after 3 minutes of waiting the phone said it is done and it will selfrestart. After the restart - voila! There was the English OS loaded on my phone and everything was working perfect!
Hope this to help to other people too!
Wow! It was very detailed and finally i resolved my problem. Thanks!
Does somebody knows how can i uninstall the fung S2U2? It causes a lot of problems with the horizontal screen ant others. It's not in the list of "remove programs".
Check this out:
ZEMONTI said:
Wow! It was very detailed and finally i resolved my problem. Thanks!
Does somebody knows how can i uninstall the fung S2U2? It causes a lot of problems with the horizontal screen ant others. It's not in the list of "remove programs".
Click to expand...
Click to collapse
Check this out:
Resco explorer
Pocket Mechanic
Pocket Toolman
Resco is very useful thing so the other two are very powerful as well. You will definetely uninstall S2U2 with more than one of them.
Good luck!
Hi, is it existing a French release of this rom for M88 or can you help me for translate it ? Cordialy
Sorry for my english very bad...
MMS works in this rom?
MMS works only with Arcsoft_MMS_Composer_v5.0.31.16
bye
Mark
i have aquestion... : I was screwing around with the m88 phone and put in the original rom in (I've done this many times) but this time i forgot to use the other three files .img and ... i only had the update.img in the card... then when i tried flahing it , it was reading but the battery fell out and now it wont turn on.... any ideas on how i can fix this... ???? I really need the help please!!! If it is possible to fix this.
helppp
I need help i was updating mi os , but it takes more than a half of hour , and now it wont turn on again how can i fix that? thanks?!
problems
i have a daxian +999
i flash it whit that file it work but now i have a white screen the phone looks like ok but nothing shows in the screen only a white screen what i can do ??
My touchscreen does work but I get the white screen asking me "updated from SD card?" then it just sits there. I dont have a keyboard to hit Y. None of the buttons do anything. Touching the screen does nothing.
*edit* figured it out. You just keep holding the power button down. Then it flashed to a solid purple screen. I went wtf.... it screwed up again? then after a few minutes it booted up.
problems in m89
hello, I recently bought a M89.
In general the phone is great, but mine has a very big problem.
As a PDA it works great, but when I insert my SIM card the phone just freezes. It works for just a minute after the SIM is inserted. I've even been able to make one or two calls before it freezes.
But past one or two minutes it just stops working. It doesn't respond to anything at all, the only solution is to remove the battery.
I think the problem is in the firmware. I've reinstalled a bunch of diferent firmwares: wm6 english, wm6.1 spanish, wm6 english again... and nothing works.
can anyone help me???, 'cause this is really killing me :'(
Thanks in advance!
oic0 said:
My touchscreen does work but I get the white screen asking me "updated from SD card?" then it just sits there. I dont have a keyboard to hit Y. None of the buttons do anything. Touching the screen does nothing.
*edit* figured it out. You just keep holding the power button down. Then it flashed to a solid purple screen. I went wtf.... it screwed up again? then after a few minutes it booted up.
Click to expand...
Click to collapse
Just wondering - What is the size of your microSD card.
As far as I know m88 does not support SD card greater that 4 Gb by default.
Please, let us know.
Updated from SD Card ?
Hello, first of all I want to say thank you because I learned a lot from this thread. I bought M88 phone some months ago and is the first time I cannot use ( I really don't know what went wrong but finally the phone is not working or frezze ).
I bought 2Gb card and was formatted in FAT32. I also complete all steps in order to load the original image but I got this message: "updated from SD card?" and nothing more... What button must be pressed ?
I'll go crazy... do you know what's the next step ?
Thank you very much.
i dont understand sorry. i have to copy the "update" imgfile and rename it as "uploader"... and leave this two files : "update and uploader" in the root folder ?
I've install ROM from this topic: http://forum.xda-developers.com/showthread.php?t=452848
and now, when I try power on my MiPhone - it show only white screen - please help!
bootloading
the file, atleast on windows 7, shows up as "update". Also, I found it works must faster and easier to make 3 copies (4 files total)
naming 1: update.img
2: uploader.img
3: Update
and 4: uploader
(so the last 2 don't actual have .img in the title)
Then just make sure you hold down both the buttons, and vuo-la! haha
Doesn't fix the MMS problem though.
Does anyone know how to make it so that it can use mms?
Miphon m88
Danke es funktioniert supper !!
i got white screen too ;[ how to fix my phone now ;/ i dont see enythink ;[