Related
Phone stuck at LG boost up scrren. can use E980 methode and file?
Thanks in advance
leeleewye said:
Phone stuck at LG boost up scrren. can use E980 methode and file?
Thanks in advance
Click to expand...
Click to collapse
You can reset your LG using LG Flashing Tool.
1.Get the LG Flashing Tool
2.Set your G Pro in Download mode.
3.Flashing tool will download firmware and flash your phone.
I just solved my G Pro's 'Insecure booting error' with Flashing tool.
ID and password for flashtool
Thank you in advance
sytzeng said:
You can reset your LG using LG Flashing Tool.
1.Get the LG Flashing Tool
2.Set your G Pro in Download mode.
3.Flashing tool will download firmware and flash your phone.
I just solved my G Pro's 'Insecure booting error' with Flashing tool.
Click to expand...
Click to collapse
leeleewye said:
ID and password for flashtool
Thank you in advance
Click to expand...
Click to collapse
Get the MegaLock.DLL here https://www.dropbox.com/s/lpdqz72e9092lo7/MegaLock.dll
Put it in Flashing Tool installed directory. It won't ask you for the login.
sw version ,I downloaded the stock rom but flashtool cannot recogise the file
sytzeng said:
Get the MegaLock.DLL here https://www.dropbox.com/s/lpdqz72e9092lo7/MegaLock.dll
Put it in Flashing Tool installed directory. It won't ask you for the login.
Click to expand...
Click to collapse
leeleewye said:
sw version ,I downloaded the stock rom but flashtool cannot recogise the file
Click to expand...
Click to collapse
Flashing Tool will download firmware on line.
It won't find firmware locally. Your phone can only be flashed to the latest version of your phone.
Failed Previousload() error
QUOTE=sytzeng;45166113]Flashing Tool will download firmware on line.
It won't find firmware locally. Your phone can only be flashed to the latest version of your phone.[/QUOTE]
Need to key in the DLL and s/w help and thanks
leeleewye said:
Failed Previousload() error
QUOTE=sytzeng;45166113]Flashing Tool will download firmware on line.
It won't find firmware locally. Your phone can only be flashed to the latest version of your phone.
Click to expand...
Click to collapse
[/QUOTE]
leeleewye said:
Need to key in the DLL and s/w help and thanks
Click to expand...
Click to collapse
[/QUOTE]
Did you disconnect Internet and turn off anti virus.also change pc date to June 10, 2012 or prior!
Thank you for you help.
Finally I use official LGMobile Support tool to recovery
Did you disconnect Internet and turn off anti virus.also change pc date to June 10, 2012 or prior![/QUOTE]
Recently, I tried to install a custom ROM of Android L (beta), which bricked my device (Canvas A1).
My device Neither boots nor able to go to recovery mode or fastboot.
Pressing power button or Power+Volume Up isn't booting anything.
My bootloader is actually unlocked.
So I tried to flash stock ROM using SP Flashing Tool and it downloaded successsfully.
But still not booting.
Is there any other way to unbrick it rather than going to Micromax Service Center??
Thanks in Advance
Problem solved!
Actually, I had used an old version of SP Tools which didn't support MTK6582 scatter configs.
Then v.5.1424 from http://forum.xda-developers.com/canvas-a1/development/official-stock-rom-canvas-a1-t2887150 helped me out and I successfully downloaded the stock ROM in meta-mode.
For users who encounter the problem:
First, Install VCOM drivers for MTK devices..
Then install Android CDC Gadget Drivers.
Download the KitKat stock ROM.. (See instructions there)
Use SP Flash Tools v5.1424 from there to download it.
Use both 'download' and 'firmware upgrade' modes to flash.
Other issues after flashing:
Also fixed IMEI issues using http://en.miui.com/thread-10061-1-1.html (Needs unlocked bootloader again)
Fixed Wi-fi error using http://forum.xda-developers.com/showthread.php?t=2730486 (Needs root access)
Rooted KitKait using TWRP recovery and installed SuperSu 2.40 without bootloader unlock (doesnot void warranty if warranty present)
Check here: https://www.youtube.com/watch?v=DxlowF80deY
Thanks XDA
GokulNC said:
Actually, I had used an old version of SP Tools (v.5.13) which didn't support MTK6582 scatter configs.
Then v.5.1424 from http://forum.xda-developers.com/canvas-a1/development/official-stock-rom-canvas-a1-t2887150 helped me out and I successfully downloaded the stock ROM in meta-mode.
For users who encounter the problem:
To get warranty back by resetting flash counter, choose "Firmware Upgrade" in SP Tools, which will automatically lock bootloader and set flash_counter=0
You can check it by running the command "fastboot getvar all" in fastboot mode using ADB kit or tools in PC.
Also fixed IMEI issues using http://en.miui.com/thread-10061-1-1.html (Needs unlocked bootloader again)
Fixed Wi-fi error using http://forum.xda-developers.com/showthread.php?t=2730486 (Needs root access)
Rooted again using TWRP recovery and installed SuperSu 2.40 without bootloader unlock (doesnot void warranty if warranty present)
Check here: https://www.youtube.com/watch?v=DxlowF80deY
Thanks XDA
Click to expand...
Click to collapse
btw micromax service center isnt asking a word even if you have a custom rom..actually may be they are so dumb that they cant find it if its unlocked or not
GokulNC said:
Recently, I tried to install a custom ROM of Android L (beta), which bricked my device (Canvas A1).
My device Neither boots nor able to go to recovery mode or fastboot.
Pressing power button or Power+Volume Up isn't booting anything.
My bootloader is actually unlocked.
So I tried to flash stock ROM using SP Flashing Tool and it downloaded successsfully.
But still not booting.
Is there any other way to unbrick it rather than going to Micromax Service Center??
Thanks in Advance
Click to expand...
Click to collapse
just flash the stock backup via SP flash tool
Same problem did u find any solution for it yet ?
Press power button and and the volume button up at the same time and restore everything that how you can fix it or use a computer to fix it
Bro i can't get in recovery my phone is dead after downloading the stock rom using sp flash tool
When trying to get firmwhere upgrade it shows failed to get pmt info
Other two methods works download and format+ download only works properly without any error but still it's not booting up
aayan007 said:
Bro i can't get in recovery my phone is dead after downloading the stock rom using sp flash tool
When trying to get firmwhere upgrade it shows failed to get pmt info
Other two methods works download and format+ download only works properly without any error but still it's not booting up
Click to expand...
Click to collapse
Download the KitKat stock ROM..
Flash using latest SP Flash Tools v5.1548 (This is the latest version & highly recommended)
Use both 'download' and 'firmware upgrade' modes
GokulNC said:
Download the KitKat stock ROM..
Flash using latest SP Flash Tools v5.1548
Use both 'download' and 'firmware upgrade' modes
Click to expand...
Click to collapse
I did it after download hit firmware upgrade it shows failed to get pmt info ????
aayan007 said:
I did it after download hit firmware upgrade it shows failed to get pmt info
Click to expand...
Click to collapse
This might help: http://forum.xda-developers.com/showpost.php?p=45780613&postcount=2
Thnx bro that may help me but i don't how to connect my phone on Meta mode to pc yet
unable to switch on mobile
I tried the mentioned methods but still not able to switch on my mobile I am able to flash format or format+download but not firmware upgrade. I am not able to switch on my mobile or recovery. plz help
can you tell us how to get into META MODE....??
GokulNC said:
Actually, I had used an old version of SP Tools (v.5.13) which didn't support MTK6582 scatter configs.
Then v.5.1424 from http://forum.xda-developers.com/canvas-a1/development/official-stock-rom-canvas-a1-t2887150 helped me out and I successfully downloaded the stock ROM in meta-mode.
For users who encounter the problem:
To get warranty back by resetting flash counter, choose "Firmware Upgrade" in SP Tools, which will automatically lock bootloader and set flash_counter=0
You can check it by running the command "fastboot getvar all" in fastboot mode using ADB kit or tools in PC.
Also fixed IMEI issues using http://en.miui.com/thread-10061-1-1.html (Needs unlocked bootloader again)
Fixed Wi-fi error using http://forum.xda-developers.com/showthread.php?t=2730486 (Needs root access)
Rooted again using TWRP recovery and installed SuperSu 2.40 without bootloader unlock (doesnot void warranty if warranty present)
Check here: https://www.youtube.com/watch?v=DxlowF80deY
Thanks XDA
Click to expand...
Click to collapse
i also have same problem. still facing the same problem after followng your instruction. help me please
---------- Post added at 07:55 AM ---------- Previous post was at 07:55 AM ----------
harkirat singhh said:
can you tell us how to get into META MODE....??
Click to expand...
Click to collapse
power botton+vol up
---------- Post added at 07:56 AM ---------- Previous post was at 07:55 AM ----------
nilesh15 said:
I tried the mentioned methods but still not able to switch on my mobile I am able to flash format or format+download but not firmware upgrade. I am not able to switch on my mobile or recovery. plz help
Click to expand...
Click to collapse
same problem im also facing, if you get solution please let me know,
Hi guys... I know this isn't correct place, but I have a bricked Canvas A1... It neither starts, nor goes to fastboot mode... Only random offline battery charging screen shows up... So I wanted to try the SP Flash Tools method.. But I can't find it... If anyone can guide me, thanks in advance!
I'm looking for Stock LP ROM of A1 flashable by SP Flash Tools
DarkSJ1998 said:
Hi guys... I know this isn't correct place, but I have a bricked Canvas A1... It neither starts, nor goes to fastboot mode... Only random offline battery charging screen shows up... So I wanted to try the SP Flash Tools method.. But I can't find it... If anyone can guide me, thanks in advance!
I'm looking for Stock LP ROM of A1 flashable by SP Flash Tools
Click to expand...
Click to collapse
Check this:
http://forum.xda-developers.com/canvas-a1/development/official-stock-rom-canvas-a1-t2887150
All links and procedure is given there
GokulNC said:
Actually, I had used an old version of SP Tools (v.5.13) which didn't support MTK6582 scatter configs.
Then v.5.1424 from http://forum.xda-developers.com/canvas-a1/development/official-stock-rom-canvas-a1-t2887150 helped me out and I successfully downloaded the stock ROM in meta-mode.
For users who encounter the problem:
To get warranty back by resetting flash counter, choose "Firmware Upgrade" in SP Tools, which will automatically lock bootloader and set flash_counter=0
You can check it by running the command "fastboot getvar all" in fastboot mode using ADB kit or tools in PC.
Also fixed IMEI issues using http://en.miui.com/thread-10061-1-1.html (Needs unlocked bootloader again)
Fixed Wi-fi error using http://forum.xda-developers.com/showthread.php?t=2730486 (Needs root access)
Rooted again using TWRP recovery and installed SuperSu 2.40 without bootloader unlock (doesnot void warranty if warranty present)
Check here: https://www.youtube.com/watch?v=DxlowF80deY
Thanks XDA
Click to expand...
Click to collapse
Will this work when i can't mount/cache
I am having the same issue formated it first with download only option then it stuck on micromax logo so I flashed it again with format all+ download and from then its not starting up. pls help
hi i am also having same problem can guys please help me
Didnt Helped me...
ive bricked my phone via flashtool while i was flashing a rom but it didnt flashed via download method, so i tried format + download and that formatted my device but didnt downloaded the rom...
now it just shows installing driver while i connect to pc and is detectable by flashtool but the device shows nothing...
everytime i try flashing a new rom via flashtool it shows illegal as the roms were third party...
please suggest me a rom that is stock and that not show illegal while flashing...
Thanks in Advance...
I recommend using the SP FLASH TOOL method for flashing stock ROM if possible.
TO FLASH THIS STOCK FIRMWARE via SP Flash TOOL Click here
THIS is Lenovo A7000 Stock "MARSHMALLOW [Android 6.0]" OTA UPDATE.
version : A7000-a_S223_160405_ROW_WC814D6764
This method is the alternative method to the SP Flash tool.
I have tested it and it works:-
First, when I am on stock Lenovo rooted lollipop ROM(ver.S153_151127_ROW).
Secondly, it also worked when I am on marshmallow rooted ROM (ver.S223_160405_ROW).
The third time it works when I am on vibe 3.5 custom ROM [MM based] with custom kernel.
If you have a rooted device, your device will unroot after installing the update.
If your device is not rooted then also it works like a charm.
To install or flash this OTA ROM
1. You should have Lenovo stock recovery installed. Use any one between method a or b
(a)If you want you can Flash stock recovery via TWRP. Click here
(Procedure is the same as installing zip file in TWRP).
(b)Flashing stock recovery via SP flash tool. Click here
(Run spflash tool Download and unzip the package, load the scatter file and flash it in "download only" mode)
After flashing recovery immediately boot into a recovery check if the recovery is installed or not if not then flash recovery again.
2. Download the stock ROM from the Lenovo server.
DOWNLOAD LINK: click here
3. Now make the two copies of the downloaded package first one in internal storage(not in any folder).
4. Rename the package to update.zip to the one in internal storage.
5. Then Boot into recovery (Power + half a second the two volume buttons), then select English as recovery language.
6. Now select install update package. It will give some warning click yes then the update will start.
In between, you will feel that update is stuck don't worry it is updating, after update your phone will reboot automatically. (update may take 10-15 minutes)
WHATEVER YOU DO AT THIS AT YOUR OWN RISK. NEITHER I NOR XDA WILL BE RESPONSIBLE IN CASE OF ANY HARDWARE/ SOFWARE DAMAGES CAUSED BY YOU TRYING THESE METHODS. YOU WILL BE SOLELY RESPONSIBLE.
IF THIS THREAD REALLY HELPS YOU THEN PLEASE TAP THANKS.
If you want to flash through SP Flash tool the go to this thread:-http://forum.xda-developers.com/android/development/lenovo-a7000-as223160405-row-andoid-6-0-t3360467/post66404777#post66404777
i am on A7000-a_plus_S141_190902_ROW.zip. will this procedure works on my device? or i need to upgrade to S153 first?
bigostoo said:
i am on A7000-a_plus_S141_190902_ROW.zip. will this procedure works on my device? or i need to upgrade to S153 first?
Click to expand...
Click to collapse
No you cannot use this and also cannot use any thread of lenovo a7000.
Because Your device is lenovo a7000 plus.
So go for lenovo a7000 plus
PrashantRana said:
THIS is Lenovo A7000 Stock "MARSHMALLOW [Android 6.0]" OTA UPDATE.
version : A7000-a_S223_160405_ROW_WC814D6764
This method is the alternative method to the SP Flash tool.
I have tested it and it works:-
First when I am on stock lenovo rooted lollipop rom(ver.S153_151127_ROW).
Secondly it also work when I am on marshmallow rooted ROM (ver.S223_160405_ROW).
If you are on rooted your phone will be unroot after installing the update.
If you are on non rooted then also it works like a charm.
To install or flash this ota ROM
1.You should have Lenovo stock recovery installed.
(a)If you don't have you can Flash stock recovery via TWRP click here
(Procedure is same as installing zip file).
(b)Flashing stock recovery via SP flashtoolclick here
(Run spflash tool Download the package,load the scatter file and flash it in "download only" mode)
After flashing recovery immediately boot into recovery.Check the recovery is installed or not if not then flash recovery again.
2.Download the stock ROM from lenovo server.
DOWNLOAD LINK:click here
3.Now make the two copy of downloaded package first one in internal storage(not in any folder)and other in micro SD(for backup).(This is my personal recommendation because if update fails we do not have to download again.)
4.Rename the package to update.zip to the one in internal storage.
5.Then Boot into recovery (Power + half a second the two volume buttons),then select English as recovery language.
6.Now select install update package.It will give some warning click yes then the update will start.
In between you will feel that update is stuck don't worry it is updating,after update your phone will reboot automatically.(update may take 10-15 minutes).
WHATEVER YOU DO AT THIS AT YOUR OWN RISK. NEITHER ME NOR XDA WILL BE RESPONBILE IN CASE OF ANY HARDWARE/ SOFWARE DAMAGES CAUSED BY YOU TRYING THESE METHODS. YOU WILL BE SOLELY RESPONSIBLE.
THANKS.
IF THIS THREAD REALLY HELP YOU THEN PLEASE TAP THANKS.
Click to expand...
Click to collapse
Sir where is mm update?
I use cm12 but i want the latest update,
Should i flash the s153 stock rom before flashing the latest update?
Or can i flash directly the MM update via twrp?
Can you provide a link the mm update for us
And the step by step procedure?
Thanks a lot sir.
I m on miui7.
Rooted
Twrp recovery
Can I follow this procedure for MM upadate??
Pls tell me.
Thanks
android_digger said:
I m on miui7.
Rooted
Twrp recovery
Can I follow this procedure for MM upadate??
Pls tell me.
Thanks
Click to expand...
Click to collapse
Till now I have not tested it upon custom ROM.
I will test it soon.It will take time. For now I advised you to use spflash tool methodhttp://forum.xda-developers.com/android/development/lenovo-a7000-as223160405-row-andoid-6-0-t3360467/post66404777#post66404777
PrashantRana said:
Till now I have not tested it upon custom ROM.
I will test it soonfor now I advised you to use spflash tool methodhttp://forum.xda-developers.com/android/development/lenovo-a7000-as223160405-row-andoid-6-0-t3360467/post66404777#post66404777
Click to expand...
Click to collapse
Sir im using cm12 custom rom too, but can i flash the stock rom s153 through twrp in this link?
PrashantRana said:
Till now I have not tested it upon custom ROM.
I will test it soon.It will take time. For now I advised you to use spflash tool methodhttp://forum.xda-developers.com/and...andoid-6-0-t3360467/post66404777#post66404777
Click to expand...
Click to collapse
Can u please tell me step by step process??
I know it's silly question but I have not tried it yet so..
Please tell me.
Once I tried but my phone is n detected.
Worked Perfectly.....Thanks a Ton !!
PrashantRana said:
THIS is Lenovo A7000 Stock "MARSHMALLOW [Android 6.0]" OTA UPDATE.
version : A7000-a_S223_160405_ROW_WC814D6764
This method is the alternative method to the SP Flash tool.
I have tested it and it works:-
Firstwhen I am on stock lenovo rooted lollipop rom(ver.S153_151127_ROW).
Secondly it also work when I am on marshmallow rooted ROM (ver.S223_160405_ROW).
If you are on rooted your phone will be unroot after installing the update.
If you are on non rooted then also it works like a charm.
To install or flash this ota ROM
1.You should have Lenovo stock recovery installed.
(a)If you don't have you can Flash stock recovery via TWRP click here
(Procedure is same as installing zip file).
(b)Flashing stock recovery via SP flashtoolclick here
(Run spflash tool Download the package,load the scatter file and flash it in "download only" mode)
After flashing recovery immediately boot into recovery.Check the recovery is installed or not if not then flash recovery again.
2.Download the stock ROM from lenovo server.
DOWNLOAD LINK:click here
3.Now make the two copy of downloaded package first one in internal storage(not in any folder)and other in micro SD(for backup).(This is my personal recommendation because if update fails we do not have to download again.)
4.Rename the package to update.zip to the one in internal storage.
5.Then Boot into recovery (Power + half a second the two volume buttons),then select English as recovery language.
6.Now select install update package.It will give some warning click yes then the update will start.
In between you will feel that update is stuck don't worry it is updating,after update your phone will reboot automatically.(update may take 10-15 minutes)
TO FLASH THIS STOCK FIRMWARE via SP Flash TOOLClick here
WHATEVER YOU DO AT THIS AT YOUR OWN RISK. NEITHER ME NOR XDA WILL BE RESPONBILE IN CASE OF ANY HARDWARE/ SOFWARE DAMAGES CAUSED BY YOU TRYING THESE METHODS. YOU WILL BE SOLELY RESPONSIBLE.
THANKS.
IF THIS THREAD REALLY HELP YOU THEN PLEASE TAP THANKS.
Click to expand...
Click to collapse
can i directly flash this marshmallow 6.0 ota to my old twrp? im currenly on LP rooted with twrp 3.0
thanks
g4rc1 said:
can i directly flash this marshmallow 6.0 ota to my old twrp? im currenly on LP rooted with twrp 3.0
thanks
Click to expand...
Click to collapse
No the ota package can only be flashed by stock recovery.or use spflash tool method
I m on miui7
Twrp
But can I flash stock recovery then install the update???
android_digger said:
I m on miui7
Twrp
But can I flash stock recovery then install the update???
Click to expand...
Click to collapse
I cannot say anything now since I have not tested it on custom ROM.you can it on your risk.I will try soon
PrashantRana said:
I cannot say anything now since I have not tested it on custom ROM.you can it on your risk.I will try soon
Click to expand...
Click to collapse
Okkey bro...thankss
---------- Post added at 11:07 AM ---------- Previous post was at 11:07 AM ----------
PrashantRana said:
I cannot say anything now since I have not tested it on custom ROM.you can it on your risk.I will try soon
Click to expand...
Click to collapse
I sent u a PM. Please check that...and please give suggestions towards that if u know.
Sir can i flash the stock rom using twrp in step 2 link?
Im using cm12.1 rom
Pls answer
PrashantRana said:
No the ota package can only be flashed by stock recovery.or use spflash tool method
Click to expand...
Click to collapse
I downloaded your stock recovery i've flashed using rashr and update from setting. As you said "works like a charm"!
thank you, keep up the good work.
Flashing Stock Rom [SP Flash Tool][Step by Step]
Instruction For Flashing Stock Rom Via SP Flash Tool Step by Stepclick here
PrashantRana said:
Instruction For Flashing Stock Rom Via SP Flash Tool Step by Stepclick here
Click to expand...
Click to collapse
after flashing and rooting i format my sdcard as internal and i notice that no zip/img file appear on twrp. has anyone encounter the same problem?
Thanks
I am not responsible for any brick.
I tested this guide myself and decided to share it.
Make a backup before this guide because you will lose your data!
The unlock method has been updated and now you can unlock the bootloader more easily without the risk of bricking after an OTA and without changing the bootloader.
Now you can safely unlock the bootloader using mtkclient.
Link: https://github.com/bkerler/mtkclient
TWRP can be installed via mtkclient or manually from rooted Android.
TWRP Download link: https://github.com/XRedCubeX/twrp_meizu_m5c/releases
IF you unlocked the bootloader with the old method you can follow these steps:
1) Download the attached package.
2) Download OTA zip from flyme, link: http://www.flymeos.com/firmwarelist?modelId=70&type=1
3) Download the latest version of SP Flash Tool.
4) Download MTKClient and follow the instructions to install it.
5) Power off the phone and keep unplugged it from PC.
6) Open SP Flash Tool, select the downloaded package and select all partitions, then press the download button, don't plug phone for now.
7) Boot to recovery with vol +, plug the phone on PC, depending on recovery, TWRP or stock, use adb sideload or put update.zip in internal memory and install the zip.
8) Let the phone reboot or reboot it manually.
9) Now start the flash from SP Flash tool automatically, let it finish.
10) After the flash, unplug the phone and reboot into recovery.
11) Paste the update.zip in the phone and flash it.
12) After reboot, let your phone reboot into android and power off.
13) You can follow the guide to unlock bootloader with mtkclient.
FAQ:
A) But will I lose the data with this guide?
Yes.
Make sure to back up your data in any case!
B) But this guide is a bit different than usual, where is "fastboot oem unlock"? Or "fastboot flashing unlock"?
Meizu has not implemented an unlock command and in this case to unlock the bootloader we have to use a tool that makes us change the unlock status.
C) Are there Custom ROMs?
There is only one custom ROM for this device, the Lineage OS 14 but I advise against using it because it has a bit of a bug but I haven't had more time to work on it yet.
D) But wasn't the guide different?
It has been updated with a better method with more advantages.
E) My device is in Hard Brick! How can I solve?
There are various types of Hard Brick and it depends from situation to situation.
F) I have installed Lineage OS 14 but I am not satisfied, I want to go back to Flyme!
Flash update.zip from official website.
G) Can I relock the bootloader?
From MTKClient readme:
for relocking use:
python mtk da seccfg lock
Click to expand...
Click to collapse
H) TWRP? I am interested in Device Tree, where is the link?
Here: https://github.com/XRedCubeX/twrp_meizu_m5c
I) I have a Meizu A5 (Chinese M5c) will it work on it?
I can't assure you anything but it could work, the only way to be sure is to test on a Meizu A5.
J) Can I flash twrp from fastboot?
Fastboot refuses to flash partitions, strangely, I don't know if downgrade or anything changes the situation but for now I was able to flash it with mtkclient.
I can remove the FlameOs from the Meizu M5c and install a custom rom. So far I haven't found any rom for this device?
Mortaux said:
I can remove the FlameOs from the Meizu M5c and install a custom rom. So far I haven't found any rom for this device?
Click to expand...
Click to collapse
Im working on a Lineage OS 14 for this device.
I tried the procedure and it failed. Apparently it just formatted it but couldn't finish the process, returned an error. Then I tried to reinstall the stock ROM and it generated the error S_BROM_DOWNLOAD_DA_FAIL (0x7D4) & 2004). Now my phone is off and I can't turn it on anymore.
I tried this method but it didn't work:
HOW TO FIX FLASH TOOLS ERROR S_BROM_DOWNLOAD_DA_FAIL (0x7D4) & 2004) FOR MTK PHONES
HOW TO FIX FLASH TOOLS ERROR S_BROM_DOWNLOAD_DA_FAIL (0x7D4) & 2004) FOR MTK PHONES FIX FOR SP FLASH TOOLS ERROR S_BROM_DOWNLOAD_DA_FAIL (0x7D4) AND (2004) Follow the following steps: 1. Get SP flash tools (Latest version) 2. Download your...
forum.xda-developers.com
I know it's my responsibility, but I don't know what else to do. Could someone please help me?
thiagosousa777 said:
I tried the procedure and it failed. Apparently it just formatted it but couldn't finish the process, returned an error. Then I tried to reinstall the stock ROM and it generated the error S_BROM_DOWNLOAD_DA_FAIL (0x7D4) & 2004). Now my phone is off and I can't turn it on anymore.
I tried this method but it didn't work:
HOW TO FIX FLASH TOOLS ERROR S_BROM_DOWNLOAD_DA_FAIL (0x7D4) & 2004) FOR MTK PHONES
HOW TO FIX FLASH TOOLS ERROR S_BROM_DOWNLOAD_DA_FAIL (0x7D4) & 2004) FOR MTK PHONES FIX FOR SP FLASH TOOLS ERROR S_BROM_DOWNLOAD_DA_FAIL (0x7D4) AND (2004) Follow the following steps: 1. Get SP flash tools (Latest version) 2. Download your...
forum.xda-developers.com
I know it's my responsibility, but I don't know what else to do. Could someone please help me?
Click to expand...
Click to collapse
You unplugged the device while it was formatting, consequently it no longer has the bootloader, that error means that the device needs an authorization file that unfortunately only meizu has, shortly if I can try to release a tool to unbrick it in cases similar to these
XRed_CubeX said:
You unplugged the device while it was formatting, consequently it no longer has the bootloader, that error means that the device needs an authorization file that unfortunately only meizu has, shortly if I can try to release a tool to unbrick it in cases similar to these
Click to expand...
Click to collapse
It's a shame .. I hope you can really release this tool, so I can revive my phone. Thank you.
You can make a video on youtube showing the procedure on the Meizu M5c. Installing Twrp and LineageOs 14? Just to make sure it works
Mortaux said:
You can make a video on youtube showing the procedure on the Meizu M5c. Installing Twrp and LineageOs 14? Just to make sure it works
Click to expand...
Click to collapse
For now I can't make the video because I can't release the Lineage because I'm fixing some bugs and I want to do some checks before releasing it publicly
thiagosousa777 said:
It's a shame .. I hope you can really release this tool, so I can revive my phone. Thank you.
Click to expand...
Click to collapse
Ok i found a working guide, tried on my M5c and it works:
Search on YouTube: flash mtk without da ,
You will find a video called, just exactly as I write here: "How to flash MTK secure boot devices without a custom DA" and follow the video tutorial for unbrick your device.
P.S:Obviously when the guide ends you flash the ROM from SP flash tool as you normally would
XRed_CubeX said:
Ok i found a working guide, tried on my M5c and it works:
Search on YouTube: flash mtk without da ,
You will find a video called, just exactly as I write here: "How to flash MTK secure boot devices without a custom DA" and follow the video tutorial for unbrick your device.
P.S:Obviously when the guide ends you flash the ROM from SP flash tool as you normally would
Click to expand...
Click to collapse
I'll try that, thanks a lot!
thiagosousa777 said:
I'll try that, thanks a lot!
Click to expand...
Click to collapse
Did you finally manage to fix the device?
Were you able to get on with the guide?
XRed_CubeX said:
Did you finally manage to fix the device?
Were you able to get on with the guide?
Click to expand...
Click to collapse
I haven't had time to do it yet. When I have time I will follow the tutorial and tell you if it worked.
thiagosousa777 said:
I haven't had time to do it yet. When I have time I will follow the tutorial and tell you if it worked.
Click to expand...
Click to collapse
Ok good luck
XRed_CubeX said:
Ok good luck
Click to expand...
Click to collapse
XRed_CubeX, I followed the tutorial from start to finish. I used the SP Flash Tool to install the M5c stock ROM, the ROM was flashed 100%, but after disconnecting the USB cable the phone did not turn on.
thiagosousa777 said:
XRed_CubeX, I followed the tutorial from start to finish. I used the SP Flash Tool to install the M5c stock ROM, the ROM was flashed 100%, but after disconnecting the USB cable the phone did not turn on.
Click to expand...
Click to collapse
Have you flashed the Stock ROM or the Engineering ROM? I remind you that even if you have flashed the eng rom only once previously, you can no longer return to the flyme bootloader so use the normal stock ROM but you will have to flash the Engineering rom
XRed_CubeX said:
Have you flashed the Stock ROM or the Engineering ROM? I remind you that even if you have flashed the eng rom only once previously, you can no longer return to the flyme bootloader so use the normal stock ROM but you will have to flash the Engineering rom
Click to expand...
Click to collapse
Well, I flashed the stock ROM a second time, using the Firmware Upgrade option, and it worked. My phone turned on and I'm in the initial setup screen.
By the way, this Engineering ROM is the ROM you shared above? Do you think it is stable enough to be used? Maybe another day I'll install it, with care to not do anything wrong again
thiagosousa777 said:
Well, I flashed the stock ROM a second time, using the Firmware Upgrade option, and it worked. My phone turned on and I'm in the initial setup screen.
By the way, this Engineering ROM is the ROM you shared above? Do you think it is stable enough to be used? Maybe another day I'll install it, with care to not do anything wrong again
Click to expand...
Click to collapse
Yes, the ROM in this thread is ROM engineering, about the stability I can't tell you why I haven't tested it, the main purpose FOR ME was to get the bootloader unlock with this ROM, if you want to switch to ROM engineering you CAN install the flyme after installed the Engineering ROM but you must always modify the OTA zip so that some partitions do not flash but if you are interested I will talk about it in more detail and maybe I will give you a hand to flash flyme safely on bootloader engineering
XRed_CubeX said:
Yes, the ROM in this thread is ROM engineering, about the stability I can't tell you why I haven't tested it, the main purpose FOR ME was to get the bootloader unlock with this ROM, if you want to switch to ROM engineering you CAN install the flyme after installed the Engineering ROM but you must always modify the OTA zip so that some partitions do not flash but if you are interested I will talk about it in more detail and maybe I will give you a hand to flash flyme safely on bootloader engineering
Click to expand...
Click to collapse
Actually, the ROM I installed with SP Flash Tools was not the update.zip from the official Flyme OS website. I downloaded the stock rom from needrom.
I have done this several times before.
But now, strangely I can no longer update to the latest version. The version I'm running is Flyme 6.0.2.0G. I tried to download the update.zip file and install it manually by clicking on it, and it appeared "corrupted file". I also tried to use the Update application and "network error" appeared. But everything else is working perfectly.
XRed_CubeX said:
if you are interested I will talk about it in more detail and maybe I will give you a hand to flash flyme safely on bootloader engineering
Click to expand...
Click to collapse
I would like to know how to install the latest version of Flyme OS via TWRP. If you can tell how to do this..
XRed_CubeX said:
can't release the Lineage because I'm fixing some bugs and I want to do some checks before releasing it publicly
Click to expand...
Click to collapse
Are you working on a custom Lineage OS ROM for this device? I'm interested, when you can publish it.. Do you have a prediction of when you will be able to release that ROM?
thiagosousa777 said:
I would like to know how to install the latest version of Flyme OS via TWRP. If you can tell how to do this..
Are you working on a custom Lineage OS ROM for this device? I'm interested, when you can publish it.. Do you have a prediction of when you will be able to release that ROM?
Click to expand...
Click to collapse
Ok, I'll explain in detail how it works: In the guide you will have read that you cannot return to the flyme using the stock rom or an unmodified OTA. This is a tip because once you flash the Engineering ROM, the engineering bootloader (which is essential for unlocking) will also be flashed, but the problem is that if you flash the stock bootloader (the flyme one, the one you surely have when you get the phone), the device for a reason unknown to me, probably the Engineering ROM modifies something in the device (?) and then goes into brick if you try to return to the flyme bootloader. To flash an OTA flyme on TWRP, you must first have some precautions: you must take the OTA on your computer (or a file explorer capable of editing zip files) and remove the following files: lk.bin preloader.bin (it will have a name longer but you still have to remove that) and tz.bin / trustzone.bin. Done like this, now the OTA becomes safe to install, you install it from TWRP, at the end of the flash it will give you an error but it is because it does not find the files we have removed but we can safely ignore it because it will have successfully installed the flyme on the device.
Regarding lineage: I'm still working on it a bit and gradually I'm discovering bugs. I already warn you that the camera will not work in the Lineage, I have tried in every way to try to make it work but it does not want to go, I have asked for help everywhere but no one has been able to answer so I do not know what to do, for the rest I want to keep a little longer the ROM under test to fix the remaining bugs
Recently I broke my smartphone and now it is in a bootloop and I can't install the official rom to it. Ofp file is a piece of **** because nothing can flash it even Realme flash tool says central directory not found. I am lost. If anybody can give me it's rom extracted from it's phone i will thank you.
Have you tried using SP flash tool ?, what region is your phone ?
Yes I am trying but you know thanks to the mtk secure stuff it is almost impossible to get the phone in brom mode.
Use mtk client to temporarily bypass security and flash using sp flash tool, when using sp flash tool always use DOWNLOAD ONLY otherwise your phone will stop booting