Guys I have a XT1710-01 3GB Ram 32GB that only turns on fastboot. Already tried to pass numerous firmwares and even then only connects in fastboot.
I believe that because it is a different version, it does not accept two chip z2 play software. This model has only 1 chip. I am waiting for some solution.
Forgive the bad English.
Related
I realize one can look at Settings / Storage to see however that number may be incorrect as evidenced by many people posting they had a 32GB model but only showing 12GB or so and having to try various things to restore the 32GB.
I searched for model # lookup but wasn't able to find anything that distinguishes a 16GB from a 32GB. In Settings the model just shows Nexus 7. The serial # is 07c0ddcf but I wasn't able to find a serial # decoder that helped. Also, it has ME571K on the label which from what I could find could be both a 16gb or 32gb.
I bought this used so am not sure what it is supposed to have. I've done a hardware reset by holding down the Power & Volume keys and didn't check the memory before I updated Android (which is when the memory could be shown incorrectly). I could do another hardware reset but figured there should be some way to know for sure whether one has a 16GB or 32GB model.
In fastboot mode check the VARIANT info.
Variant shows flo 16G
k23m said:
In fastboot mode check the VARIANT info.
Click to expand...
Click to collapse
Ok, had to look up fastboot mode (basically with Nexus powered off hold the Volume Down & Power Button until fastboot comes up). Variant shows flo 16G so looks like it's a 16gb model. Thanks for the help!
www amazon com/gp/product/B01FQHGUFA/ref=oh_aui_detailpage_o03_s00?ie=UTF8&th=1
So I picked up 3 of these units for Android TV for a project, and now they are free and I am looking at Remix OS on them to turn them into thin clients.
I have tried the S905 generic firmware as that is the processor, but both using the Update tool internal, the OTA USB connection, and SD card from recovery. But none seem to have worked.
I am willing to ship one of these to a developer to get it running on, as long as they ship it back once it is good to go.
Anyone able to help me out?
For a project, I needed a low cost 32GB tablet and noticed that Best Buy was about to introduce a new version of their 10 inch tablet. It is now available and I am creating this post to attempt to gather useful information into a single thread as I doubt this tablet will merit it's own forum.
What is possible so far...
1. Bootloader Unlock
Root Status
I tried Kingroot v3.5 and it was not able to root the tablet.
Links:
Specifications: https://www.insigniaproducts.com/pdp/NS-P10A8100/5855801
Manufacturer and Model: Lightcomm Technology Co., Ltd. MID1023MA http://www.light-comm.com/en/productinfo-176-193-75.html
Brief Review:
The tablet is pretty much what you would expect for a low cost tablet. The build quality is pretty good (it doesn't give much when you twist it, everything fits well) and the screen is better than I had expected. They had the old model on display and this is a pretty good improvement over the previous model. I may do a more complete review but just want to share some observations...
Camera - Low megapixel but fairly snappy response with autofocus.
Crapware - Very little - File Manager, FM Radio, and Sound Recorder - All else is standard android/Google apps
Storage - About 23 GB available (reports firmware is 9.19GB)
Speakers - Adequate but not very good
OS - Android 7.0 - May 5, 2017 Security Patch - No updates currently available
No problems getting ADB and Fastboot acess but will report more after I have time to work with it.
Saved for future use...
Bootloader Unlock
It is possible to unlock the bootloader. NOTE: This may void your warranty and the unlocking process triggers a factory reset. ALSO NOTE: Like many other devices, the tablet will display a warning at every boot that the device is no longer secure.
STEPS:
1. Enable ADB via Developer Options in Settings
2. Enable OEM Unlocking in Developer Options in Settings
3. Via ADB, reboot into bootloader mode
4. Ensure you are able to access the tablet via Fastboot
5. 'fastboot oem unlock' - Follow the prompts
6. Your device will reset (as it explains) and will be bootloader unlocked
Bootloader lock
It may be possible to relock the bootloader. When I gave it the command "fastboot oem lock", I got a message on the tablet asking me to confirm. However, it indicated that I *might* need to put the original software back on. At this point, I wasn't willing to try without a recovery option.
Hi. I just purchased the new flex 11 from BB myself. It appears to have the exact same processor, chip, and GPU as another tablet I have used before. The Lenovo Tab3 8. The only difference I can see is the emmc size (Lenovo 16Gb & Insignia 32Gb respectively) and the screen sizes. The processor is the same however limited to 1Ghz on the Lenovo whereas I believe the 1.3Ghz is the base CPU speed (I think the European version of the Lenovo came with a 1.3Ghz speed). So out of curiosity would the finished Lenovo's TWRP recovery work on the Insignia? Just a thought. Also, in case of brick could you use the Lenovo's firmware to flash it (after modding the scatter file of course). I'm just a noob to development but have no problem getting my hands dirty (I have 2 Lenovo's both broken but modified heavily)
I'm stuck in this in this problem, I can do the Bootloader Unlock but no furder. Is there any update for this device?
Is there a way to know if or when it will be possible to root this tablet?
Hidden Developer Mode
While browsing the net today I came across an article about unlocking the OEM so having a NS-P10A8100 I decided to give it a try and it worked.
Go to your about tablet setting, Model number and tap on it 7 times, a message will come up saying You are one step away from being a developer, this came up 2 times but after I did it the third time and checked my settings the new hidden Developer mode was in my settings and inside was a button, OEM unlocking.
I haven't tried anything else yet as I am new to all this but maybe this will help to get a Root Strategy for this model of tablet.
So it's there a way to fix this piece of sh!!! Cause it's so anointing that you can't even look at it with a ugly face cause it will start to stall.. I'm new on all this stuff so if there is away to fix it or making a little better please put all the steps to do it... Thank you so much!
flash file for this device?
Hi, so i went on a little adventure with my MTCD PX3 RK 3188 unit, first i wanted to experiment with some new RAM upgrades, so I tried quite a few different manufacturers and specifications as I work for a PCB/PCA manufacturer. But I think i have a pair that works now, cant remember the exact part name but it is manufactured by Micron 1 GB modules. The unit boots, and i can access recovery and flash roms without problems. The issue arises when it tries to bot the selected ROM, the unit shows the splash screen of the rom selected and then proceeds to boot the ROM with the flashing car logo. But after the car logo has blinked for a minute, the screen shuts off and the device reboots.
So, while fiddling inside the recovery menus I've discovered what i think might be the issue, firstly I cannot wipe the device, if selected the cmd prompts: "Data wipe failed"
But if i try to install a new ROM I can also observe that it does not update uboot.img because "E: Can't find uboot".
This leads me to belive that while I was experimenting with the RAM modules, I might have overheated the internal storage chip, in turn corrupting some data.
So now i need some assistance:
1. Is there any way to flash a new bootloader?
2. Can i change the internal memory chip and just flash the MCU and rom to it? How would i do that? Will it fix the problem?
3. Is there any other fixes that I should try?
Thank you for any suggestions.
Head over to OTG thread to flash ROM directly or scenario where eMMC is corrupt or blank.
HerpyDerpy said:
Hi, so i went on a little adventure with my MTCD PX3 RK 3188 unit, first i wanted to experiment with some new RAM upgrades, so I tried quite a few different manufacturers and specifications as I work for a PCB/PCA manufacturer. But I think i have a pair that works now, cant remember the exact part name but it is manufactured by Micron 1 GB modules. The unit boots, and i can access recovery and flash roms without problems. The issue arises when it tries to bot the selected ROM, the unit shows the splash screen of the rom selected and then proceeds to boot the ROM with the flashing car logo. But after the car logo has blinked for a minute, the screen shuts off and the device reboots.
So, while fiddling inside the recovery menus I've discovered what i think might be the issue, firstly I cannot wipe the device, if selected the cmd prompts: "Data wipe failed"
But if i try to install a new ROM I can also observe that it does not update uboot.img because "E: Can't find uboot".
This leads me to belive that while I was experimenting with the RAM modules, I might have overheated the internal storage chip, in turn corrupting some data.
So now i need some assistance:
1. Is there any way to flash a new bootloader?
2. Can i change the internal memory chip and just flash the MCU and rom to it? How would i do that? Will it fix the problem?
3. Is there any other fixes that I should try?
Thank you for any suggestions.
Click to expand...
Click to collapse
I think you can try to use rockchip tools to erase the flash memory and to flash again your image.
As px3 and px5 are interchangeable....
Check on forums as there is some information of building a OTG cable for px5 to allow you to connect the coreboard to USB on PC and allows you to use rock chip tools
Enviado desde mi SM-G950F mediante Tapatalk
Hello, I bought a coolpad cp3648a at the flea market they couldn't remember the unlock pattern, I've reset to factory settings multiple times but it keeps asking for the unlock pattern.
Where do I go from here? Can I install a new OS?
I can get to Android recovery where I can Apply Update from ADB or SD card.
What do Y'all recon I should do from here?
Specs as I find them on Boost Mobile site are:
memory
3GB RAM/32GB ROM w/support for up to 128GB MicroSD™ Card
processor
1.8GHz Qualcomm Snapdragon 450 Octa-Core Processor
operating system
AndroidTM 9.0 Pie
connectivity
Wi-Fi® enabled
Bluetooth 4.2
USB Type C
3.5mm with Stereo Output
email me and ill get you thru to the other side.
[email protected]
Gman8910 said:
email me and ill get you thru to the other side.
[email protected]
Click to expand...
Click to collapse
Thanks but I thought we might discuses it here on the forum.
That means that they encrypted the phone you still have to hook it to the computer and bypass the encryption if hard reset does not work most of the time hard reset works