Related
I have a Roadfinder 143 or more well known Binatone carrera x430 Pna specs i know so far:
Display Touch Screen 4.3" TFT LCD Resolution 480 x 272 pixels
SD/MMC Card Memory Up To 2GB
GPS chipset Sirf Atlas III
Processor Centrality Atlas III 372MHz High Speed ARM926J
Operating system Microsoft Wince 5.0 Core Version (Macallan)
Speaker 1w I Have Changed it with a internal very powerful speaker!
USB USB 1.1 and 2.0
TMC output
Headphone output
Memory on Board ROM/RAM up to 2GB / 64MB
Battery/Type Built-in 1450 mAH li-polymer
Weight 200g
Dimension (mm) 127 x 85 x 19
What i want to do:
Export the rom so i can unpack it and make a few changes.
I would like to find a way to flash it with clean WindowsCE core5.0 (Or other if possible)
I cant figure out how to go into bootloader mode...
I want to take advantage of this big screen and transform it in to a pda. It doesent have camera,phone,gprs,3g,wifi,bluetooth,irda,
so no need to find drivers for them it souldent be to hard to make/edit a rom for it.
It has very large internal memory in a resident flash drive as it calls it 512mb that's without the rom memory size on the current setup that it has everything locked up!
I've managed to get an explorer running and put extra stuff in but the registry gets cleared on every reboot its so very limited....
Can't i just Run an app to make a backup.img/.nb0 of the existing rom take the drivers that i need from it an get a clean wm5 image and put the drivers in flash it by active sync or most probably sd and have it free???
Please give me a bit of help i would gladly donate for someones effort to help me! Im not a complete noob and many others would like this and use it because its a cheap good pna in Grecce,America,China,France,Europe generaly,Australia. There is also a smaller version of this pna with 3.5" screen and 256mb internal flash memory
Feel free to comment and direct me advise me. (Alex)
These are the link to pages that sell this device:
http://binatonegps.com/gps/_global/product_detail.php?item_id=4
http://www.kotsovolos.gr/site/product.jsp?catid=53081
http://www.myphone.gr/forum/showthread.php?t=219937
Firestarter42 said:
I have a Roadfinder 143 or more well known Binatone carrera x430 Pna specs i know so far:
Display Touch Screen 4.3" TFT LCD Resolution 480 x 272 pixels
SD/MMC Card Memory Up To 2GB
GPS chipset Sirf Atlas III
Processor Centrality Atlas III 372MHz High Speed ARM926J
Operating system Microsoft Wince 5.0 Core Version (Macallan)
Speaker 1w I Have Changed it with a internal very powerful speaker!
USB USB 1.1 and 2.0
TMC output
Headphone output
Memory on Board ROM/RAM up to 2GB / 64MB
Battery/Type Built-in 1450 mAH li-polymer
Weight 200g
Dimension (mm) 127 x 85 x 19
What i want to do:
Export the rom so i can unpack it and make a few changes.
I would like to find a way to flash it with clean WindowsCE core5.0 (Or other if possible)
I cant figure out how to go into bootloader mode...
I want to take advantage of this big screen and transform it in to a pda. It doesent have camera,phone,gprs,3g,wifi,bluetooth,irda,
so no need to find drivers for them it souldent be to hard to make/edit a rom for it.
It has very large internal memory in a resident flash drive as it calls it 512mb that's without the rom memory size on the current setup that it has everything locked up!
I've managed to get an explorer running and put extra stuff in but the registry gets cleared on every reboot its so very limited....
Can't i just Run an app to make a backup.img/.nb0 of the existing rom take the drivers that i need from it an get a clean wm5 image and put the drivers in flash it by active sync or most probably sd and have it free???
Please give me a bit of help i would gladly donate for someones effort to help me! Im not a complete noob and many others would like this and use it because its a cheap good pna in Grecce,America,China,France,Europe generaly,Australia. There is also a smaller version of this pna with 3.5" screen and 256mb internal flash memory
Feel free to comment and direct me advise me. (Alex)
These are the link to pages that sell this device:
http://binatonegps.com/gps/_global/product_detail.php?item_id=4
http://www.kotsovolos.gr/site/product.jsp?catid=53081
http://www.myphone.gr/forum/showthread.php?t=219937
Click to expand...
Click to collapse
You may need platform builder to generate a ROM for that device. But going to bootloader mode is still unknown for me.
Bootloader mode drivers
I think i have found how to go into bootloader mode, i keep the side power button pressed for a bit while switching the device on and then connect it to the pc and it comes up as a unknown usb device and prompts me for drivers and stays there!!! the thing is i can't get any thing to show up on the screen... Maby thats the bootloader type that it has by factory and doesn't show anything up on purpose...
Where do you think i can find drivers for it? i have realy looked everywhere that i know... Help me please guys...
try the voxtel carrera 430 file (prosh_430)
holding down the sleep button and press reset
after some 20 sec you will see the download image menu
release the sleep button
after 10 minutes you will have a brand new voxtel aka binatone.
but the menu is in russian so you have to find the buttons to change the lang in english and to calibrate the screan
First of all this is not my work, i was not able to the team with this, but i was following everything and have a heads up as well..
Note : Links Updated
biktor_gj over at XDA along with ULTRASHOT managed this.
NOTE : IF YOU HAVE A LUMIA 800 WITH QUALCOMM , PM ME
Second : IF YOU HAVE NO IDEA WHAT YOU READ PLEASE DO NOT TRY THIS!
GET IN TOUCH WITH ME OR A MOD, WE WILL HELP YOU.
I CAN TRY TO HELP YOU REMOTELY BUT WE'LL NEED TO ADJUST THE TIME.
Third : There is some risk in this if you dont do it correct by yourself, myself and no one is responsible for your device.
This is all under your own risk.
Even if we help you i tell you till now i havent nor any of my friends havent bricked a phone.
To make sure, we are well aware of how this works.
You need Something called as a Qualcomm on 800 and 710
For a 710 device , any 710 can be unlocked, even if it has a DLOAD.
For an 800, only a device showing up as Qualcomm can be unlocked.
A DLOAD in 800 cannot be unlocked as yet.
To know what type of Loader you have follow this :
Open device manager in you PC (Just so you dont miss the driver installation, its better view able in Device manager)
Power off your phone , dont plug the USB as yet.
Hold VOLUME UP button and plug the USB in the PC.
Check device manager.
You will have a DLOAD or a Nokia cable connectivity or a Qualcomm technology.
In case of DLOAD and Nokia cable connectivity. Nothing else will be noticeable.
If you get a Qualcomm, u will get a box to format Disk, say NO!
SO now
Qualcomm = unlocked bootloader
DLOAD = Locked bootloader
* UNLOCKED BOOTLOADER = NO NCS = YES CUSTOM ROM
* LOCKED BOOTLOADER = YES NCS = NO CUSTOM ROM
For Lumia 710 users, u need to flash a Qualcomm bootloader (Unlocked bootloader) to enable Qualcomm , so u can Full Unlock your device.
If You have DLOAD, follow the full tuto.
IF you have a Qualcomm, goto step B.
[glow=red,2,300]Important : Flashing a CUSTOM ROM, to full unlock your phone will need a HARD RESET , in which you will loose all your data.
I would recommend you back up all your data, mostly just sync your pics and stuff of you PC and sync your contacts to your LIVE ID.[/glow]
---------------------------------------------------------------------------------------------------
A.To install Qualcomm Bootloader in Lumia 710:
http://www.youtube.com/watch?v=N9kM0hDMgWA&feature=youtu.be
1.Download the new version NSS
http://www.mediafire.com/download.php?rjn2ffwau8drfnn
2.Extract to a folder, start the program.A folder named "loaders" will be created in the NSS folder.
3.Download this : http://www.4shared.com/rar/RmIuS9gP/qualcomm_bootloader_files_for_.html
4.Insert the 2 loaders from above link in \loaders\special\wp7\
RM803_12w07_prod_generic_nokia_osbl.esco &
RM803_11w48_prod_raw_nokia_osbl.bin
5.Install these drivers:
http://www.4shared.com/rar/W5cHhg6V/winusb_drivers_x86.html for 32 bit users
http://www.4shared.com/rar/Iz4Y5JEm/winusb_drivers_x64.html * for 64 bit users
6.Now select "Nokia USB Connectivity" in NSS in the white box.
6. Go to Flashing->WP7 Tools->Install.
DONE.
Now you have an unlocked bootloader, so u can flash a custom ROM.
head to 2nd part.
---------------------------------------------------------------------------------------------------
B.To flash a Full unlocked rom in Lumia 710:
Before flashing i would suggest you use this : http://forum.xda-developers.com/showpost.php?p=25126572&postcount=642
so you dont have to go through for the activation code.
http://www.youtube.com/watch?v=RV-CkXFz3ZI&feature=youtu.be
1.Download any of these Custom ROMs
RainbowMod for Lumia 710 [Updated 28.07.2012] : http://forum.xda-developers.com/showthread.php?t=1654415
Rataplan V1.0 - WP 7.8 for Lumia 710 All languages : http://forum.xda-developers.com/showthread.php?t=1937317
Lumiatrix 5 - [WP 7.8] - [ALL LANGUAGES!!] by vova1609 : http://forum.xda-developers.com/showthread.php?t=1899973
2.Extract both the files in same folder (select both rar files and right click>extract here)
3.You will get a file new-os.nb
4.Open NSS PRO
5.Go To Flashing - >WP7 Tools
6.Power on Phone normally and connect it using USB cable.
7.Let Windows Find your phone with correct drivers.
8.On Bottom - Left choose Nokia USB Connectivity.
9.Click On DETECT
10.Select "Normal Mode", "OSBL Mode" from the dropdown boxes.
11.Now click on "OS File" and choose the ".NB" file you want to flash.
12.Click on "Write OS".
13.Wait till it flashes and then when it says done, unplug your device and remove the battery.
Now reinsert and switch on.
In case your phone is not detected by the PC,
Run NSS PRO as administrator
Power off your phone and disconnect the USB from the PC
Now hold volume UP key and plug it into the USB
Then you should be able to Write OS perfectly.
14.While entering LIVE ID during setup it asks for activation code.
Go here HERE
Chat with them and ask for activation code and enter it in the device and proceed.
I am not responsible fro any damage done to your device, you take all responsibility for what you do.
Backup your DPP partition or use my tool to avoid lost the activation code
Then the step 14 is not needed
dewe said:
Backup your DPP partition or use my tool to avoid lost the activation code
Then the step 14 is not needed
Click to expand...
Click to collapse
Thanks mate..
could u help me with link?
I will add it to the thread, and give both ways as optional for which people feel easier
surya467 said:
Thanks mate..
could u help me with link?
I will add it to the thread, and give both ways as optional for which people feel easier
Click to expand...
Click to collapse
use this tool,skip the dsp and usp,it isn't need bakup the dpp!
the thread:http://forum.xda-developers.com/showthread.php?t=1665821
Thanks for the info. You are great.
Sent from my Lumia 710 using Board Express
I have a problem
After I installed Qualcomm Bootloader in Lumia 710
He offered me a disc format, and I made it
In this context my Nokia will no longer turns
When you connect the USB cable does not recognize my drivers
Is there help?
Moki1 said:
I have a problem
After I installed Qualcomm Bootloader in Lumia 710
He offered me a disc format, and I made it
In this context my Nokia will no longer turns
When you connect the USB cable does not recognize my drivers
Is there help?
Click to expand...
Click to collapse
Hi,
If the Qcom loader still running in RAM - yes, you can fix. If removed from USB,
watchdog restarted it, battery drained, etc - no way for now to fix.
Regards
Bph&co said:
Hi,
If the Qcom loader still running in RAM - yes, you can fix. If removed from USB,
watchdog restarted it, battery drained, etc - no way for now to fix.
Regards
Click to expand...
Click to collapse
Uh
Whether these in service to know what it is if you send him to complain?
iv mentioned clearly in red..NO! for a format!! :/
surya467 said:
iv mentioned clearly in red..NO! for a format!! :/
Click to expand...
Click to collapse
oh and I know now, but before I had read everything.
But let me how to make my Nokia
No one initial bzzzz so nothing impossible with her.
bit worried bout that!
ill have a word around and let u knw..
thanks for this guide
I'm kinda noobish with WP flashing, I have a T-Mobile USA branded Lumia 710 and I've heard that the Nokia Network Setup app has been missing for months now, if I am unable to get it with the stock ROM will I be able to flash like an official Indian ROM with this guide? someone told me a version that has preloaded the Nokia Network Setup on it, I've heard also about Russian versions...
any feedback would be appreciated
giodelgado said:
thanks for this guide
I'm kinda noobish with WP flashing, I have a T-Mobile USA branded Lumia 710 and I've heard that the Nokia Network Setup app has been missing for months now, if I am unable to get it with the stock ROM will I be able to flash like an official Indian ROM with this guide? someone told me a version that has preloaded the Nokia Network Setup on it, I've heard also about Russian versions...
any feedback would be appreciated
Click to expand...
Click to collapse
this guide is for flashing a 710 with custom ROM
and the network app is missing...
u might need to download an older firmware for this.
but i would suggest u stick to updated, since there is a huge improvement in battry
surya467 said:
this guide is for flashing a 710 with custom ROM
and the network app is missing...
u might need to download an older firmware for this.
but i would suggest u stick to updated, since there is a huge improvement in battry
Click to expand...
Click to collapse
thanks, I flashed 1600.3031.8773.12121 Nokia RM-803 Country Variant United Kingdom GB V5 BLACK (059N2L6) Tango from Navifirm, it's unbranded and has the nokia network Setup app
great
Facebook link not working
Facebook link not working....
Can you post it again?
Never mind ..got it...flashed
Hi! Thanks for this simple to understand but amazing guide! I did it, but when finish the phone asks me for the PIN number. I entered the default carrier PIN of my SIM card and it says that it's incorrect PIN. Is this number it asks the activation code you mentioned a few posts ago?
kalya said:
Facebook link not working....
Can you post it again?
Never mind ..got it...flashed
Click to expand...
Click to collapse
Link fixed
Harlley Sathler said:
Hi! Thanks for this simple to understand but amazing guide! I did it, but when finish the phone asks me for the PIN number. I entered the default carrier PIN of my SIM card and it says that it's incorrect PIN. Is this number it asks the activation code you mentioned a few posts ago?
Click to expand...
Click to collapse
The PIN should be your carrier PIN, the other part is the activation code for LIVE services
You should put a direct link to the dev website because a new version is available
Hi All,
Previously, I had purchase 1 unit of No.1 S6 from androidexport.com but found there is blank screen when making calls !
I must remove the battery to restart the phone! Below are the phone info :
Model :GT-9500
CPU : MTK6589, Cortex A7 quad core, 1.2GHz; GPU: PowerVR SGX 544MP
OS : 4.2
RAM : 1 GB
ROM : 4 GB
Then I tried to flash it with factory ROM MTK6589 then power on unable to boot up!
Anyone know how to solve ? Thank you !
No.1 S 6 Bricked
I got a similar issue.
I installed an apk that was supposed to merge the internal with the external storage but upon reboot i got a blank screen.
I downloaded the Original No.1 S6 ROM but when using Flash tools, I chose by mistake Format-Everything, a total wipe out.
I then went on to install the ROM but that didn't do anything.
I can see the power led coming one, the screen is dark but kind of flickering and after a couple of mins I can hear a sound, like if the phone has fully booted up to the Android GUI.
I did the same to another phone I have, a Goophone S4 but that one needs another ROM, first things first.
I dont even have the recovery menu, pressing Volume up (tried down as well ) and Power, nothing happens.
Does anyone know the cure?
I utilized the search function in the forum but did not find an answer or solution to this.
Sorry if this has been repeated elsewhere.
Thanks
Hi guys!
As I've read, and also experienced myself, one of the big issues these Android Rearview mirrors have is that they only come with either 512mb or 1gb or system storage.
That leaves you practically unable to install many applications (or any if you have the 512 version).
Thankfully, I've found this mirror that finally comes with a decent system storage of 16gb!
Check it out:
https://youtu.be/fW_PavSv91k
Specs:
Android 5.0
MediaTek 8382 Quad core @ 1.3 Ghz
1GB Ram
16GB System Storage
Mali 400 MP
SD up to 32GB
1280x480 6.86 Screen
1080p DVR
3G + Wifi
Click to expand...
Click to collapse
I have have the same rearview camera in the video but mine is Chinese version, is their a way to flash it to be the same in the video? with google play ? can someone help me flash a firmware or has the firmware to the American version thanks
I have this mirror as well. It's nice but.........
I also have this mirror. It works pretty much as advertised but, the data connection is garbage! Most of the time I get good signal strength but no service. When I do get service, the best speed that I've gotten is >0.20 Mbps!! I'm not sure if it's the firmware or hardware that's causing the problem. I've tried it all over So Cal and parts of Vegas with the same result. I'm thinking about opening it up to see if I can make improvements.
Model number = cm84
Build number = LRX21M dev-keys
Custom build version = ALPS.LO.MP2.V1.9_CM84_V1.7.6
android VERSION 5.0
Has anyone gotten a steady data (not wifi) connection with this device??
I'm having the same issue DaFlash. I tried setting up FreedomPop but never get any data. I am able to get 2G with my TMobile sim card but I need that for my phone. It would be great if someone had some advice on how to improve that. Thanks
Any update rom for this?
See thread on 4pda (RU). You need login there.
http://4pda.ru/forum/index.php?showtopic=792739
For E515 mirror there is latest 1.8.1: https://yadi.sk/d/W_LWtrpe3NkDik&e=56428204
Cheers
tweakradje said:
See thread on 4pda (RU). You need login there.
http://4pda.ru/forum/index.php?showtopic=792739
For E515 mirror there is latest 1.8.1: https://yadi.sk/d/W_LWtrpe3NkDik&e=56428204
Cheers
Click to expand...
Click to collapse
can you help me with the register? never get the captcha.
plis!
TWRP from 4PDA for those who cannot register there due to captcha.
Thanks to 4PDA (maxizbrovarov)!
Cheers
I have an idea
so i thought id like to see if someone truly got in there, so we can make a rom that is capable of showing text messages and more stuff from the phone?. the prototype will then be pitched to california gov. as a solution for texting and driving.
tweakradje said:
TWRP from 4PDA for those who cannot register there due to captcha.
Thanks to 4PDA (maxizbrovarov)!
Cheers
Click to expand...
Click to collapse
problem with using rear camera continuously
i have this mirror mod. alps lo mp2 v1.9 cm84
i want to use the preview always showing me the rear camera
When i want to use the rear camera continuously it change after few minutes to front cam., why? how i can use the rare cam continuously
(the problem not in recording but in preview and using the mirror to see what behind me while driving my car)
can you help me
emadhsobhy said:
i have this mirror mod. alps lo mp2 v1.9 cm84
i want to use the preview always showing me the rear camera
When i want to use the rear camera continuously it change after few minutes to front cam., why? how i can use the rare cam continuously
(the problem not in recording but in preview and using the mirror to see what behind me while driving my car)
can you help me
Click to expand...
Click to collapse
Maybe in /system/custom.prop
#camera preview on fullscreen mode when ACC ON
persist.acc.on.cam.fullscreen=rear
emadhsobhy said:
i have this mirror mod. alps lo mp2 v1.9 cm84
i want to use the preview always showing me the rear camera
When i want to use the rear camera continuously it change after few minutes to front cam., why? how i can use the rare cam continuously
(the problem not in recording but in preview and using the mirror to see what behind me while driving my car)
can you help me
Click to expand...
Click to collapse
not quite sure what you are seeing but I do know how to get it to show rear continuously,
tap driving video, settings(bottom right), auto exit preview, set to never exit preview.
now when you set the driving video to rear it will stay like that.
tweakradje said:
Maybe in /system/custom.prop
#camera preview on fullscreen mode when ACC ON
persist.acc.on.cam.fullscreen=rear
Click to expand...
Click to collapse
i can not find this option in setting
---------- Post added at 02:48 PM ---------- Previous post was at 02:41 PM ----------
xn1337 said:
not quite sure what you are seeing but I do know how to get it to show rear continuously,
tap driving video, settings(bottom right), auto exit preview, set to never exit preview.
now when you set the driving video to rear it will stay like that.
Click to expand...
Click to collapse
i made this but when i drive my car i found it jump from front to rear and after few time back to rear many times so it not fixed with rear camera
Help on my cm84
I need help with my android rear mirror model cm84. Need to reset it to factory settings since got stuck at boot - Android Upgrading Optimizing 1app of 1. Reset button wont work.
@silvertears
You can do that from TWRP if you have that installed. Wipe Data partition.
Or if you have ADB connection still working with USB cable you can do it from shell:
adb shell am broadcast -a android.intent.action.MASTER_CLEAR
Cheers
New Firmware for the cm84. Thanks to 4pda:
full_C08_KM_3G_WJ_6.86_EN_1.9.90.zip
https://yadi.sk/d/ZSXzWqW-qFz6fg
I use it for a month now and is very stable.
edit 20 jan 2019
full_C08_KM_3G_WJ_6.86_EN_1.9.90_B.zip
https://yadi.sk/d/qhbWzQD43Q94GN
My CM84 is now dead ar black screen after firmware updated.
The flash tool showed succesfully updated however it never wake up again.
I flashed using this HD900 from 4pda.
Any advice on hiw to wake it up?
Thanks.
Did you use SP Flash tool?
Make sure you have the "Mediatek VCOM Preloader" port driver installed
The easiest way to reflash it is like this (general Mediatek method):
- unplug usb from your mirror
- start SP Flash tool
- load and select the image parts you want to flash (I only do boot and system)
- click the Donwload button
- plug in the usb cable from your PC into your mirror
Maybe you need to hold the switch on the mirror for 10+ seconds
Maybe you need to use a pin to press the reset button on the top/back of the mirror
SP Flash tool will recognize it and starts flashing
Had a lot of "bricked" devices in my life. Never a problem.
DON'T flash anything other than boot and system. Don't do LK and whatever you have. In 99,9% of the cases not necessary.
Cheers
tweakradje said:
Did you use SP Flash tool?
Make sure you have the "Mediatek VCOM Preloader" port driver installed
The easiest way to reflash it is like this (general Mediatek method):
- unplug usb from your mirror
- start SP Flash tool
- load and select the image parts you want to flash (I only do boot and system)
- click the Donwload button
- plug in the usb cable from your PC into your mirror
Maybe you need to hold the switch on the mirror for 10+ seconds
Maybe you need to use a pin to press the reset button on the top/back of the mirror
SP Flash tool will recognize it and starts flashing
Had a lot of "bricked" devices in my life. Never a problem.
DON'T flash anything other than boot and system. Don't do LK and whatever you have. In 99,9% of the cases not necessary.
Cheers
Click to expand...
Click to collapse
Yes I used Flash Tool to flash the firmware. Actually I have flashed firmware for this device several time but suddenly this time after flashing it never wake up again.
I will try to install Mediatek VCOM Preloader and flash again.
Thanks for your support.
Cheers,
How do you display messages on screen- Bluetooth app ?
For a project, I needed a low cost 32GB tablet and noticed that Best Buy was about to introduce a new version of their 10 inch tablet. It is now available and I am creating this post to attempt to gather useful information into a single thread as I doubt this tablet will merit it's own forum.
What is possible so far...
1. Bootloader Unlock
Root Status
I tried Kingroot v3.5 and it was not able to root the tablet.
Links:
Specifications: https://www.insigniaproducts.com/pdp/NS-P10A8100/5855801
Manufacturer and Model: Lightcomm Technology Co., Ltd. MID1023MA http://www.light-comm.com/en/productinfo-176-193-75.html
Brief Review:
The tablet is pretty much what you would expect for a low cost tablet. The build quality is pretty good (it doesn't give much when you twist it, everything fits well) and the screen is better than I had expected. They had the old model on display and this is a pretty good improvement over the previous model. I may do a more complete review but just want to share some observations...
Camera - Low megapixel but fairly snappy response with autofocus.
Crapware - Very little - File Manager, FM Radio, and Sound Recorder - All else is standard android/Google apps
Storage - About 23 GB available (reports firmware is 9.19GB)
Speakers - Adequate but not very good
OS - Android 7.0 - May 5, 2017 Security Patch - No updates currently available
No problems getting ADB and Fastboot acess but will report more after I have time to work with it.
Saved for future use...
Bootloader Unlock
It is possible to unlock the bootloader. NOTE: This may void your warranty and the unlocking process triggers a factory reset. ALSO NOTE: Like many other devices, the tablet will display a warning at every boot that the device is no longer secure.
STEPS:
1. Enable ADB via Developer Options in Settings
2. Enable OEM Unlocking in Developer Options in Settings
3. Via ADB, reboot into bootloader mode
4. Ensure you are able to access the tablet via Fastboot
5. 'fastboot oem unlock' - Follow the prompts
6. Your device will reset (as it explains) and will be bootloader unlocked
Bootloader lock
It may be possible to relock the bootloader. When I gave it the command "fastboot oem lock", I got a message on the tablet asking me to confirm. However, it indicated that I *might* need to put the original software back on. At this point, I wasn't willing to try without a recovery option.
Hi. I just purchased the new flex 11 from BB myself. It appears to have the exact same processor, chip, and GPU as another tablet I have used before. The Lenovo Tab3 8. The only difference I can see is the emmc size (Lenovo 16Gb & Insignia 32Gb respectively) and the screen sizes. The processor is the same however limited to 1Ghz on the Lenovo whereas I believe the 1.3Ghz is the base CPU speed (I think the European version of the Lenovo came with a 1.3Ghz speed). So out of curiosity would the finished Lenovo's TWRP recovery work on the Insignia? Just a thought. Also, in case of brick could you use the Lenovo's firmware to flash it (after modding the scatter file of course). I'm just a noob to development but have no problem getting my hands dirty (I have 2 Lenovo's both broken but modified heavily)
I'm stuck in this in this problem, I can do the Bootloader Unlock but no furder. Is there any update for this device?
Is there a way to know if or when it will be possible to root this tablet?
Hidden Developer Mode
While browsing the net today I came across an article about unlocking the OEM so having a NS-P10A8100 I decided to give it a try and it worked.
Go to your about tablet setting, Model number and tap on it 7 times, a message will come up saying You are one step away from being a developer, this came up 2 times but after I did it the third time and checked my settings the new hidden Developer mode was in my settings and inside was a button, OEM unlocking.
I haven't tried anything else yet as I am new to all this but maybe this will help to get a Root Strategy for this model of tablet.
So it's there a way to fix this piece of sh!!! Cause it's so anointing that you can't even look at it with a ugly face cause it will start to stall.. I'm new on all this stuff so if there is away to fix it or making a little better please put all the steps to do it... Thank you so much!
flash file for this device?