Hi, on my Dasaita Px6 with android 9 the phone app is very poor, can i replace it?
i want to sarch contact and make a call by numeric keypad, as I do from the phone
fraizzo said:
Hi, on my Dasaita Px6 with android 9 the phone app is very poor, can i replace it?
i want to sarch contact and make a call by numeric keypad, as I do from the phone
Click to expand...
Click to collapse
I had the same problem.. the seller send me the latest firmware. This the link, but I'm not sure we have the same device:
https://www.sendspace.com/pro/dl/3qocqd
Related
The new update from Jabra has been released for BT800 headset.
http://www.jabra.com/JabraCMS/NA/EN/Misc/SoftwareBT800/
The newest version is 0.34
BUT:
The update is worse than version 0.32!
I removed immediately the update and turned back to v0.32, the biggest issue is the one about the "+" before the number, with 0.32 this problem was solved, now it's present again.
The only good thing in this version is that you can enable both ring and vibration using headset's ringtones, but, since you can no longer call using the headset (for the + issue), I think updating your BT800 with this new release it's not a good thing!
Bye!
Same with me....
And just in case you didn't have the downgrade to v0032 anymore:
the dutch jabra.nl site still has the 0032 release
If you look well the update is only for american users (BT800_02_0034_US.exe). The european sites are still upgrading to v32 only.
Seems that USA version of BT800 is different from european and implement different things.
Fresh news:
I wrote to Jabra USA about this issue.
They forwarded my mail to their product specialist in order to investigate.
Stay tuned...
Thank you for the information. Lucky that I didn't know they have the v0034 update. I am still using v0032.
return to bt800 00.32
Hello,
it's somebody send me the firmware 00.32. You are right the 00.34 it's out.
best regards
Re: return to bt800 00.32
levinces said:
Hello,
it's somebody send me the firmware 00.32. You are right the 00.34 it's out.
best regards
Click to expand...
Click to collapse
Here you go
http://www.jabra.com/NR/rdonlyres/2CD5DC9B-EBEB-466C-AA9E-AE8706929798/0/BT800_02_0032.exe
Also, follow instruction here
http://www.jabra.com/JabraCMS/AP/EN/Misc/SoftwareBT800/
thank you very much.
good working guys
i´ve noise with my bt800 in the conversations ?¿?
Any more
??¿?
Thanks
Jabra BT800 Software Upgrade
Does anyone have version 0034 that they can upload??
Jabra's website has the dead link.
Thanks
I have been using the original Tab 7inch as a mobile office since it came out. It runs my trading programs and phone quality is great enough for business. Can the ATT Tab 3 (7 or 8 in) make phone calls? It appears some international versions can but the ATT model does not have a phone icon. Not sure if just adding a dialer is the solution or if hardware is missing.
Doji
I use an app called "Spare Phone" to use the tablet as a phone. It requires you also have Google Voice .
I use earbuds for the calls.
dojiman said:
I have been using the original Tab 7inch as a mobile office since it came out. It runs my trading programs and phone quality is great enough for business. Can the ATT Tab 3 (7 or 8 in) make phone calls? It appears some international versions can but the ATT model does not have a phone icon. Not sure if just adding a dialer is the solution or if hardware is missing.
Doji
Click to expand...
Click to collapse
Unreasnbl said:
I use an app called "Spare Phone" to use the tablet as a phone. It requires you also have Google Voice .
I use earbuds for the calls.
Click to expand...
Click to collapse
Thanks Unreasnbl. That appears to be a voip solution but I am looking for native cellular voice calls. I guess I'll stick with my first gen tab for the time being.
Thanks again
Was this project never undertaken? I am also looking for a way to make phone calls that will not count towards my data (i.e., I want to use my own phone number), but so far I only see the old GTab information. Can anyone point in the right direction? I have used hangouts dialer to make calls, but it is only showing up as private, and I cannot receive calls (when they call my number it goes to voicemail immediately).
Hello,
I have a pumpkin for over a year RK3066 (C1009). Unfortunately, never has the radio tuner worked. I was times a firmware link sent, but also brought nothing. Wanted to send the radio back but Pumpkin has crossed there.
Where can I get the original firmware together with MCU? Have the internet looked up and down.
Data from the board: KD-HCT-MB 2015/03/10 REV-1.61
Data from the Board: MTC_RK3066_REV0.3a 2014.03.27
Maybe someone has also a tip for me, how to successfully turn on WLAN and important and the radio tuner work? He gets a transmitter at all and the other not at all.
I strongly assume that I must take KLD1.
If I use the original radio, then it works immediately.
I have already checked whether the antenna amplifier gets voltage at the pumpkin, which was the case.
Greeting Marco
Sorry for my bad english.
Hello everyone,
I have a Seicane PX5 4GB RAM.32GB storage unit, all working fine except the reception on the radio seems poor. I'm currently running Android 10 with version 3.56 of the MCU, and I read on another thread about someone with poor radio reception that was fixed by going to version 3.30 of the MCU. So, I got hold of the 3.30 MCU and installed it, but it didn't go well, I got the 'version unmatch' issue, and all the MCU settings were lost.
Not to worry, I just reinstalled 3.56. This got rid of the version unmatch message, but still the settings were gone.
Before I installed the 3.3 MCU, I exported the settings from the MCU setup screen. Question is, where does it put the file it creates ? I thought it created a file called 'dmcu.cfg', but I can't see it anywhere. Does anyone know where this gets saved ? I can remember most of the settings, and the unit's back up & running with the exception of the touch buttons down the side of the screen. When I try & use the 'Button Panel Study' in factory settings the buttons don't respond at all. I'm guessing it's one of the settings on the 'Other' tab, but it would be easier to find the config file that I had before and restore that.
Also, am I correct in thinking the wrong MCU can give poor radio reception ? Or are the two unconnected ? The radio region selected in factory config is correct.
Thanks, Tony.
Never mind, I've reset all the settings and got my unit fully functional again. But would still be interested t hear anyone's opinion on whether or not the MCU version could potentially affect the radio reception.
Archbishop666 said:
Never mind, I've reset all the settings and got my unit fully functional again. But would still be interested t hear anyone's opinion on whether or not the MCU version could potentially affect the radio reception.
Click to expand...
Click to collapse
No, reception is not affected unless coming from a very early version
Marchnz, thanks for your reply. Guess I either have an aerial issue or a dodgy unit. We'll see.
Hey Guys ,
I have a 2015 f-150 the I just installed a Phoenix auto PX6 in and my callers are hearing an echo and there is a 2-3 second delay. My phone is an iPhone 8 Plus. I have tried the following:
-wireless and wire both echo
-unplugged the external mic that came with the PX6
-disconnected the OEM mic
-deleted and reinstalled Zlink
-updated zlink to Ver 3.6.12
-updated android
-rebooted it a few times
-Turned noice canceling off on my phone
-emailed zlink a few times no response
-I have had two calls with Phoenix all they did was check the ver of the app and the firmware I haven’t herd anything back
-I turned on the pause third party app option on z link
Does anyone have a fix for this ?
Thanks
Sean
Thanks to me randomly being able to find version 3.7.6 of Zlink I was able to solve the issues. I see someone deleted the review I had of Zlink to I will still stick with my original opinion that Zlink has no customer support it does not auto update. I had sent several emails over the period of at least a month to ask for updates and support and did not get one back. However they were very quick to respond to a purchase request.
I am having the exact same issue where everyone that calls me hears an echo on their end . I have searched to through all the settings and install settings but couldn’t find anything to adjust the mic. After you updated zLink, did this fix the issue for you ? Currently my unit has 3.5.44 installed. Thanks
GuntGraphicsWork said:
Thanks to me randomly being able to find version 3.7.6 of Zlink I was able to solve the issues. I see someone deleted the review I had of Zlink to I will still stick with my original opinion that Zlink has no customer support it does not auto update. I had sent several emails over the period of at least a month to ask for updates and support and did not get one back. However they were very quick to respond to a purchase request.
Click to expand...
Click to collapse
Could you let me know the procedure to update the Zlink app to 3.6.12 (or newer)? I have a Hal9K rom. Thanks in advance
GuntGraphicsWork said:
Thanks to me randomly being able to find version 3.7.6 of Zlink I was able to solve the issues. I see someone deleted the review I had of Zlink to I will still stick with my original opinion that Zlink has no customer support it does not auto update. I had sent several emails over the period of at least a month to ask for updates and support and did not get one back. However they were very quick to respond to a purchase request.
Click to expand...
Click to collapse
From viewing your posts via your profile, your "review" still exists.
marchnz said:
From viewing your posts via your profile, your "review" still exists.
Click to expand...
Click to collapse
Negative this is a completely different post and the only tread that I have.
MarcoZ76 said:
Could you let me know the procedure to update the Zlink app to 3.6.12 (or newer)? I have a Hal9K rom. Thanks in advance
Click to expand...
Click to collapse
I am not 100% about how it works with your unit but with mine I just downloaded the new zlink and installed it. Some android units have to install if from an external flash drive. Here is new version:
https://www.dropbox.com/s/6lj53r1t5sr05dt/zlink-wla-a-zhuoxw-release-v3.7.6_jg.apk?dl=0