Develop Bugs

Wifi passwords lost after reboot

just bought p607t and immediately I installed 4.4.4 with a firmware from sammobile. Now the only issue i got is Wifi autoconnection. Every time I reboot the tablet all my wifi passwords are gone, and no autoconnection. I have to manualy enter the passwords everytime i reboot. I have tried on different places (coffee shops) still the same.
I tryed and installed AOSP rom just to check if its software isue, and on aosp wifi passwords are remembered even after reboots, everything is fine.
i would like to know if anyone out there is facing the same problem and if u found a fix.
Thank you

found the fix
kingune said:
just bought p607t and immediately I installed 4.4.4 with a firmware from sammobile. Now the only issue i got is Wifi autoconnection. Every time I reboot the tablet all my wifi passwords are gone, and no autoconnection. I have to manualy enter the passwords everytime i reboot. I have tried on different places (coffee shops) still the same.
I tryed and installed AOSP rom just to check if its software isue, and on aosp wifi passwords are remembered even after reboots, everything is fine.
i would like to know if anyone out there is facing the same problem and if u found a fix.
Thank you
Click to expand...
Click to collapse
I edited build.prop in /SYSTEM folder and changed the line: ro.securestorage.support=true from TRUE to FALSE, rebooted, added the wifi password and everything is fine now wifi passwords are remembered.

WiFi Failed to Connect

Hello everyone,
Whenever I try to connect to a protected wifi network, I get this 'failed to connect to network' error. So it started when i was using Blisspop. WiFi was working great until suddenly it felt like no data was being transferred by wifi. I forget the network and then tried to relogin to it, but I started getting this error. I proceeded to fullwipe and reflashed just Blisspop without gapps or anything but I get this error when setting up WiFi for the first time in google setup. Then, I flashed resurrection remix which didn't ahve this problem. Follwing, I flashed cm12 and euphoria rom(aosp) and they both had this failed to connect to network issue, therefore it is not only a cm problem. May I know what might have happened and what can I do to fix it? Since no one else seem to have this problem. I repeatedly flash back resurrection remix and it always worked like a charm. I assume stock would work too, but I can test it if anyone needs that information. Thanks guys!
D855

GT-P5210 : No more WiFi since wipe

dear all,
I'd like to wipe my Galaxy Tab 3 10.1 to factory settings.
I used classic startup menu (POWER+VOLUME) to access the wipe option.
When it restarts, WiFi is not working anymore : it can't activated.
It worked once, I succeeded to give the WPA2 key, I got an IP, and 2 seconds later, Wifi was not actived anymore and I wasn't able to activate it again.
I tried several workarounds, several solutions, several ODIN version to push several ROM files. Nothing is working.
Lot of ROMs are considered as invalid by different ODIN versions (even if MD5 checksum is valid).
Is there any package I can try to install (through APK inserted on the SD card for instance) to test something ?
Is there a good ROM file to download/try ?
Help...
Thank you

Kallagan said:
dear all,
I'd like to wipe my Galaxy Tab 3 10.1 to factory settings.
I used classic startup menu (POWER+VOLUME) to access the wipe option.
When it restarts, WiFi is not working anymore : it can't activated.
Thank you
Click to expand...
Click to collapse
Try different network, if it's the same, the wifi built in is defective. There is no option other than changing a new board and it's not expensive
http://www.ebay.com/itm/121839619758?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649

Try to go back to the stock firmware to see the result.

I've already tried ROM stock
I'll bring it at my office tomorrow to check with another wlan signal
Thx for advice's

Kallagan said:
I've already tried ROM stock
I'll bring it at my office tomorrow to check with another wlan signal
Thx for advice's
Click to expand...
Click to collapse
Trust me, after factory reset and at initial setting, Wifi should be turn on by default; if it doesn't your Wifi chips are defective

Problems with Wi-Fi access in CM13

Hi, I currently have installed CM13 (build 31/12/2015) and I have problem to connect to internet via Wifi network. When connected to the network, seeks, obtains IP and connects but disconnects automatically. I've uninstalled Xposed Framework via Recovery, I have made to wipe cache/dalvik and I have reset the network settings from on CM13 but the problem persists.
Finally, I have chosen to install a new kernel (Nebula Kernel), but the problem persist. Thank for your help.

cesarandres_8911 said:
Hi, I currently have installed CM13 (build 31/12/2015) and I have problem to connect to internet via Wifi network. When connected to the network, seeks, obtains IP and connects but disconnects automatically. I've uninstalled Xposed Framework via Recovery, I have made to wipe cache/dalvik and I have reset the network settings from on CM13 but the problem persists.
Finally, I have chosen to install a new kernel (Nebula Kernel), but the problem persist. Thank for your help.
Click to expand...
Click to collapse
stick with stock rom. CM is garbage

cesarandres_8911 said:
Hi, I currently have installed CM13 (build 31/12/2015) and I have problem to connect to internet via Wifi network. When connected to the network, seeks, obtains IP and connects but disconnects automatically. I've uninstalled Xposed Framework via Recovery, I have made to wipe cache/dalvik and I have reset the network settings from on CM13 but the problem persists.
Finally, I have chosen to install a new kernel (Nebula Kernel), but the problem persist. Thank for your help.
Click to expand...
Click to collapse
Hello,
I have made a dirty flash and the problem has been fixed.

[RN8] Magisk Module WifiBonding made my wifi stop working

Hey,
Here's the full story of what I have been doing with my mom's RN8 today.
Just unlocked bootloader, installed the newest TWRP, flashed Magisk + Magisk Manager Canary, reset phone to recovery and got an SYSTEM DAMAGED error, flashed twrp 3.4 +vbmeta from a youtube guide and saved my phone, installed Magisk module called WifiBonding or something - it didn't work and my phone stopped displaying any wifi networks so turned the module off, that didn't help so I reset the phone. That didn't work either so I factory reset it, that didn't help, so I went to TWRP and wiped data partition - I still have the problem though, the phone doesn't display any WIFI networks - when I click the wifi button in the dropdown menu or go to setting and click the switch, it goes back onto the off position after a second. Even during the installation wizard after I wiped the phone, it didn't see any wifi networks!
How do I fix the problem? What do I wipe in twrp to replace the file that has completely broken my wifi? Right now I will try to install the magisk manager again and remove it using the 'uninstall' option. Help me out fellas, please, I am clueless as to what to do!
tl;dr - installed the module called Wifi Bonding (Qcom) v. 1.14 by simonsmh - phone didn't display any WIFI networks, the button returned to the off position, I wiped twrp data, the problem still persists. How do I solve it?
Thank you in advance! @simonsmh
edit: tried resetting the wifi and mobile and bt settings just now and it didn't change anything. Also, fogot to mention I am running MIUI Globla 11.0.9 Stable (PCOMIXM)

Duplicate thread closed