Related
Hi, I created this my first thread to know which Magisk modules you use with your Xiaomi mi a2 lite and then later maybe create a list of the best ones.
Mine are:
-HAL3 enabler - Camera2 Api support
-Youtube Vanced - Magisk Repo
-Viper4Android FX
-NotchKiller
- GPU Turbo Boost
Rboard themes, are gboard themes, very cool, i highly recommended.
Txatxiquesi said:
Rboard themes, are gboard themes, very cool, i highly recommended.
Click to expand...
Click to collapse
Other modules ??
I don't use gpu turbo since it didn't change the performance at all, I tried with the 3dmark test and the result was the exact same. I personally like System Accent Theme and Magisk Manager for Recovery Mode (just in case you install a module that makes your device bootloop).
Willy1992 said:
I don't use gpu turbo since it didn't change the performance at all, I tried with the 3dmark test and the result was the exact same. I personally like System Accent Theme and Magisk Manager for Recovery Mode (just in case you install a module that makes your device bootloop).
Click to expand...
Click to collapse
Do you need a custom recovery for magisk recovery module??
boe323 said:
Do you need a custom recovery for magisk recovery module??
Click to expand...
Click to collapse
You dont need a custom recovery for all the modules but for the last one I talk about it is esential since you use the terminal in the recovery mode to access this tool
Willy1992 said:
You dont need a custom recovery for all the modules but for the last one I talk about it is esential since you use the terminal in the recovery mode to access this tool
Click to expand...
Click to collapse
Ok thanks, do you know anything about magisk beta v19??, can it be installed as an update through magisk or do you need to completley remove magisk??, the new version no longer uses an image, its all mounted in data.
boe323 said:
Ok thanks, do you know anything about magisk beta v19??, can it be installed as an update through magisk or do you need to completley remove magisk??, the new version no longer uses an image, its all mounted in data.
Click to expand...
Click to collapse
I just heard of it today, it doesnt seem like you can install it from the magisk manager app (at least with the stable channel selected) as it doesnt show that there is an update but ill try to search for some more info in the future since in my opinion it may be early to install the update and magisk 18.1 works perfectly for me
Willy1992 said:
I just heard of it today, it doesnt seem like you can install it from the magisk manager app (at least with the stable channel selected) as it doesnt show that there is an update but ill try to search for some more info in the future since in my opinion it may be early to install the update and magisk 18.1 works perfectly for me
Click to expand...
Click to collapse
I think you need to change channels unless you have to go to the main site, i cant find anything on installing over traditional magisk.
I haven't rooted yet so haven't had a chance to check this but does anyone know if the ambient display gestures module work for a2 lite?
kingd421 said:
I haven't rooted yet so haven't had a chance to check this but does anyone know if the ambient display gestures module work for a2 lite?
Click to expand...
Click to collapse
I tested different ones in the past and none of them worked.
thorin0815 said:
I tested different ones in the past and none of them worked.
Click to expand...
Click to collapse
only one that works is AODEnabler, the version that installs it to product overlay, no gestures though, but it links into the phone always on display and all the animation is there between notifications, live wallpaper also works while showing the always on display.
I'm using the following modules:
- Advanced Charging Controller (acc)
- Busybox for Android NDK
- Daily Job Scheduler (djs) *it comes w/ acc*
- Universal GMS Doze
- ViPER4Android FX
- Youtube Vanced
Other note-worthy modules that I've used before:
- Energized Protection
- CloudflareDNS4Magisk
- CloudflareDNS4Magisk IPv6
elvinguitar said:
I'm using the following modules:
- Advanced Charging Controller (acc)
- Busybox for Android NDK
- Daily Job Scheduler (djs) *it comes w/ acc*
- Universal GMS Doze
- ViPER4Android FX
- Youtube Vanced
Other note-worthy modules that I've used before:
- Energized Protection
- CloudflareDNS4Magisk
- CloudflareDNS4Magisk IPv6
Click to expand...
Click to collapse
For some reason Busybox module breaks my data connection. If installed the mobile data is disconnected.
gkornaks said:
For some reason Busybox module breaks my data connection. If installed the mobile data is disconnected.
Click to expand...
Click to collapse
I didn't encounter that kind of issue.
My Magisk modules
- Busybox
- Systemless TZData
- F-Droid extension
- Debloater (v17 doesn't work with magisk 18)
- Riru/EdXposed
- mm
I use debloater so that services like Google Maps can be made non-system (possible to restrict) and to hide the launcher (Oreo recents).
I have EdXposed for no Google play games (stop annoying nag every time I start a game).
Mm let's me recover from magisk modules that boot loop. Boot into twrp and modules can be disabled.
I think Pix3lify (gives you them beautiful rounded corners and Pixel Blue accent colors) and QuickSwitch (lets you change your default launcher without breaking the recents, install Lawnchair v2 or OnePlus Launcher port by paphonb after that) are the must install modules on this device.
marstonpear said:
I think Pix3lify (gives you them beautiful rounded corners and Pixel Blue accent colors) and QuickSwitch (lets you change your default launcher without breaking the recents, install Lawnchair v2 or OnePlus Launcher port by paphonb after that) are the must install modules on this device.
Click to expand...
Click to collapse
Could you please give a link for the one plus launcher? I simply can't find it. Thanks in advance
hncdesilva said:
Could you please give a link for the one plus launcher? I simply can't find it. Thanks in advance
Click to expand...
Click to collapse
Here's the complete guide (link in guide): https://www.xda-developers.com/oneplus-launcher-recent-apps-interface-android-pie/
marstonpear
Click to expand...
Click to collapse
Txatxiquesi
Click to expand...
Click to collapse
Willy1992
Click to expand...
Click to collapse
at1291762
Click to expand...
Click to collapse
Will u guys mind very much adding links for d various modules u mentioned?
Thanks.
Disclaimer: I am not a developer (I don't code), but I have been flashing ROMs for many devices over the years. This is more of a practical guide from an end-user perspective in pursuit of finding the best ROM for this magnificent hardware. This is more of a compilation of all the relevant information I found. I'm very open to suggestions/corrections that could improve this.
Disclaimer: Only tested with RR, PixelExperience, and ArrowOS GSI.
I haven't seen a proper guide to flash GSI ROMs for Mi Mix 3, thus I decided to share what I know that works. I put a brief explanation for each step below.
1. Unlock Bootloader - If you haven't done so yet, I recommend following the instructions in https://www.reddit.com/r/Xiaomi/wiki/bootloader
2. Install TWRP
a) I recommend to use the official TWRP from this link https://twrp.me/xiaomi/xiaomimix3.html or refer to the forum https://forum.xda-developers.com/mi-mix-3/development/recovery-unofficial-twrp-recovery-t3901261.
b) To install TWRP, I recommend to follow the instructions from Xiaomi.eu. For those not familiar, the "twrp.img" in the code should be the full path of the file. Something like "D:\folder\twrp.img"
c) If you have an older version of TWRP, I suggest to update it to the official.
3. Install Xiaomi.eu - Start from this step in case of bootloops or issues (especially caused by Magisk modules by my experience)
a) This is what I do instead of the 'flash vendor.img from Chinese Dev' prerequisite mentioned in other threads. This is an easier step (just one flash in TWRP) and a better fallback (a working ROM) in case things go wrong. I have had no issues (fingerprint, calls, etc..) with this and I've done this thrice.
b) Download the latest MIUIv10.2 Stable for MIMix3 from the link https://xiaomi.eu/community/threads/miui-10-0-10-1-10-2-stable-release.47170/.
c) Wipe > Format Data (prevents problems, and removes encryption if you had it). Also do Factory Reset (idk, just to be sure).
d) Copy xiaomi.eu ROM to internal storage, then Install > Flash. No need to boot/restart, proceed to the next step.
4. Install GSI ROM - wth is GSI? https://github.com/phhusson/treble_experimentations/wiki/Frequently-asked-questions-(FAQ)
a) We can actually install any GSI in https://forum.xda-developers.com/project-treble/trebleenabled-device-development but there is an issue in installing Google Apps (Open GApps) as many people mentioned in https://forum.xda-developers.com/mi-mix-3/development/9-0-resurrection-remix-v7-0-t3891975 and as confirmed by the official TWRP thread https://forum.xda-developers.com/mi...p-recovery-t3901261/post79035909#post79035909
b) Given the above, the only feasible options are GSI ROMs with built-in GApps and the only 2 I found are PixelExperience GSI and ArrowOS GSI. As GApps is integrated in the system.img, no need to flash Open GApps thus no issues. Having tried both, I personally recommend ArrowOS due to the performance and additional customization options.
c) Download the arm64 AB version (ArrowOS as an example) https://forum.xda-developers.com/pr...abled-device-development/gsi-arrowos-t3835111
d) Copy the resulting system.img to internal storage (extract if its a .zip), in TWRP click Install > Install Images > select system.img of ArrowOS > select System partition. You can now boot, or follow next step to root with Magisk.
5. Install Magisk
a) The Magisk version that passes SafetyNet is the builds from ianmacd https://github.com/ianmacd/MagiskBuilds look for v18.2 (newer versions might work but I haven't tried them yet). You can still use the official Magisk Manager and the ianmacd version will be recognized. Just change the update channel in Magisk to https://goo.gl/yZpnrf. Credits to this thread https://forum.xda-developers.com/mi-mix-3/how-to/root-magisk-18-2-mix-3-t3905754
b) After flashing Magisk, boot, install Magisk Manager, then download and install the module "SafetyPatch". SafetyNet check will now be success.
c) Even though SafetyNet is passed, some banking apps still are not working. Hopefully someone can share a solution (probably MagiskHide Props Config, or canary builds?) to make banking apps work.
Final Thoughts
ArrowOS GSI seems to be stable enough and I'm using it as my daily driver now. I am so much happier compared to when using MIUI Global ROM. I really like the performance (very fluid), battery life (a lot better than MIUI Global), customizations (like traffic indicator, status bar stuff), unli Google Photos, and everything that makes AOSP/stock android awesome. No more bloatware, annoying non-dismissable notifications, and horrible auto brightness from MIUI.
The only real issue I encountered so far is the bluetooth audio/music issue, but this seems to be a common problem in GSI ROMs. Bluetooth calls work though. There is no app to handle the slider (but I don't care. lol). Lastly, the AI button becomes useless, but see below for the fix.
Optional stuff that makes things better:
1. Remapping AI button - When using GSI ROMs, AI button becomes useless. But to map it back to Google Assistant (or anything actually), follow the instructions from this thread (needs some knowledge about Tasker). https://forum.xda-developers.com/showpost.php?p=78523778&postcount=38 For the Tasker Task, I selected Input > Voice Command. This now assigns the button to open Google Assistant. Does not work well when screen is off though, but its just easy to unlock.
2. Google Camera - The main reason why I bought this phone. Google Camera brings out the best in the awesome camera - Use this version https://forum.xda-developers.com/mi-mix-3/themes/gcam-6-manual-focus-long-exposure-t3885610
3. Stereo Speaker Mod - https://forum.xda-developers.com/mi-mix-3/themes/magisk-stereo-speaker-mod-mix-3-t3900580 Makes the phone earpiece into a speaker, increasing overall volume. I personally use version 3 and I'm very happy.
4. Fluid NG - App in Google Play Store to have the same recents/home/back gestures from MIUI 10.
reasonablebasis said:
Disclaimer: I am not a developer (I don't code), but I have been flashing ROMs for many devices over the years. This is more of a practical guide from an end-user perspective in pursuit of finding the best ROM for this magnificent hardware. This is more of a compilation of all the relevant information I found. I'm very open to suggestions/corrections that could improve this
I haven't seen a proper guide to flash GSI ROMs for Mi Mix 3, thus I decided to share what I know that works. I put a brief explanation for each step below.
1. Unlock Bootloader - If you haven't done so yet, I recommend following the instructions in https://www.reddit.com/r/Xiaomi/wiki/bootloader
2. Install TWRP
a) I recommend to use the official TWRP from this link https://twrp.me/xiaomi/xiaomimix3.html or refer to the forum https://forum.xda-developers.com/mi-mix-3/development/recovery-unofficial-twrp-recovery-t3901261.
b) To install TWRP, I recommend to follow the instructions from Xiaomi.eu. For those not familiar, the "twrp.img" in the code should be the full path of the file. Something like "D:\folder\twrp.img"
c) If you have an older version of TWRP, I suggest to update it to the official.
3. Install Xiaomi.eu - Start from this step in case of bootloops or issues (especially caused by Magisk modules by my experience)
a) This is what I do instead of the 'flash vendor.img from Chinese Dev' prerequisite mentioned in other threads. This is an easier step (just one flash in TWRP) and a better fallback (a working ROM) in case things go wrong. I have had no issues (fingerprint, calls, etc..) with this and I've done this thrice.
b) Download the latest MIUIv10.2 Stable for MIMix3 from the link https://xiaomi.eu/community/threads/miui-10-0-10-1-10-2-stable-release.47170/.
c) Wipe > Format Data (prevents problems, and removes encryption if you had it). Also do Factory Reset (idk, just to be sure).
d) Copy xiaomi.eu ROM to internal storage, then Install > Flash. No need to boot/restart, proceed to the next step.
4. Install GSI ROM - wth is GSI? https://github.com/phhusson/treble_experimentations/wiki/Frequently-asked-questions-(FAQ)
a) We can actually install any GSI in https://forum.xda-developers.com/project-treble/trebleenabled-device-development but there is an issue in installing Google Apps (Open GApps) as many people mentioned in https://forum.xda-developers.com/mi-mix-3/development/9-0-resurrection-remix-v7-0-t3891975 and as confirmed by the official TWRP thread https://forum.xda-developers.com/mi...p-recovery-t3901261/post79035909#post79035909
b) Given the above, the only feasible options are GSI ROMs with built-in GApps and the only 2 I found are PixelExperience GSI and ArrowOS GSI. As GApps is integrated in the system.img, no need to flash Open GApps thus no issues. Having tried both, I personally recommend ArrowOS due to the performance and additional customization options.
c) Download the arm64 AB version (ArrowOS as an example) https://forum.xda-developers.com/pr...abled-device-development/gsi-arrowos-t3835111
d) Copy the resulting system.img to internal storage (extract if its a .zip), in TWRP click Install > Install Images > select system.img of ArrowOS > select System partition. You can now boot, or follow next step to root with Magisk.
5. Install Magisk
a) The Magisk version that passes SafetyNet is the builds from ianmacd https://github.com/ianmacd/MagiskBuilds look for v18.2 (newer versions might work but I haven't tried them yet). You can still use the official Magisk Manager and the ianmacd version will be recognized. Just change the update channel in Magisk to https://goo.gl/yZpnrf. Credits to this thread https://forum.xda-developers.com/mi-mix-3/how-to/root-magisk-18-2-mix-3-t3905754
b) After flashing Magisk, boot, install Magisk Manager, then download and install the module "SafetyPatch". SafetyNet check will now be success.
c) Even though SafetyNet is passed, some banking apps still are not working. Hopefully someone can share a solution (probably MagiskHide Props Config, or canary builds?) to make banking apps work.
Final Thoughts
ArrowOS GSI seems to be stable enough and I'm using it as my daily driver now. I am so much happier compared to when using MIUI Global ROM. I really like the performance (very fluid), battery life (a lot better than MIUI Global), customizations (like traffic indicator, status bar stuff), unli Google Photos, and everything that makes AOSP/stock android awesome. No more bloatware, annoying non-dismissable notifications, and horrible auto brightness from MIUI.
The only real issue I encountered so far is the bluetooth audio/music issue, but this seems to be a common problem in GSI ROMs. Bluetooth calls work though. There is no app to handle the slider (but I don't care. lol). Lastly, the AI button becomes useless, but see below for the fix.
Optional stuff that makes things better:
1. Remapping AI button - When using GSI ROMs, AI button becomes useless. But to map it back to Google Assistant (or anything actually), follow the instructions from this thread (needs some knowledge about Tasker). https://forum.xda-developers.com/showpost.php?p=78523778&postcount=38 For the Tasker Task, I selected Input > Voice Command. This now assigns the button to open Google Assistant. Does not work well when screen is off though, but its just easy to unlock.
2. Google Camera - The main reason why I bought this phone. Google Camera brings out the best in the awesome camera - Use this version https://forum.xda-developers.com/mi-mix-3/themes/gcam-6-manual-focus-long-exposure-t3885610
3. Stereo Speaker Mod - https://forum.xda-developers.com/mi-mix-3/themes/magisk-stereo-speaker-mod-mix-3-t3900580 Makes the phone earpiece into a speaker, increasing overall volume. I personally use version 3 and I'm very happy.
Click to expand...
Click to collapse
Not all GSI work ontop of Xiaomi Eu
Flashing magisk and safety net patch also doesn't guarantee safety net passing on a few of the GSI as well. CTS will fail for obvious reasons
Mackay53 said:
Not all GSI work ontop of Xiaomi Eu
Flashing magisk and safety net patch also doesn't guarantee safety net passing on a few of the GSI as well.
Click to expand...
Click to collapse
Noted. Which GSI have you tried that do not work on top of Xiaomi.EU? I tried RR, PixelExperience, and ArrowOS and all work well. I can put this as a disclaimer.
Any solution for the Magisk safetynet, or is this really the best solution available so far?
reasonablebasis said:
Noted. Which GSI have you tried that do not work on top of Xiaomi.EU? I tried RR, PixelExperience, and ArrowOS and all work well. I can put this as a disclaimer.
Any solution for the Magisk safetynet, or is this really the best solution available so far?
Click to expand...
Click to collapse
Can't remember as it was a while ago, possibly OctoOS and descendant and 1 other, omni ROM maybe.
For the ones that come with SU you need to navigate to the xbin folder in the system and remove the SU file.
Then cause Xiaomi EU uses the wrong fingerprint props you need to use the magisk props config module and manually type in the mix 3 fingerprint (unless the module has been updated to include mix 3).
If you installed the Chinese dev vendor then the props will be there ready to be used so the magisk module can make them active without manually typing it. This will sort out both safety net fails.
If this was sometime ago, the features in China Dev would have already been integrated in the latest China Stable, which is the basis of Xiaomi.EU.
Maybe you can test it now to see if Xiaomi.EU really works. I tried it with RR, PixelExperience, and ArrowOS and I'm facing no issues. So flashing China Dev vendor.img seems to be an outdated instruction.
reasonablebasis said:
Noted. Which GSI have you tried that do not work on top of Xiaomi.EU? I tried RR, PixelExperience, and ArrowOS and all work well. I can put this as a disclaimer.
Any solution for the Magisk safetynet, or is this really the best solution available so far?
Click to expand...
Click to collapse
Pixel dust gsi too....
reasonablebasis said:
If this was sometime ago, the features in China Dev would have already been integrated in the latest China Stable, which is the basis of Xiaomi.EU.
Maybe you can test it now to see if Xiaomi.EU really works. I tried it with RR, PixelExperience, and ArrowOS and I'm facing no issues. So flashing China Dev vendor.img seems to be an outdated instruction.
Click to expand...
Click to collapse
The 3 GSI you mention is a very small sample of the GSI available so you can't say it's an outdated instruction. Have you tested them all like I have? No you haven't.
Xiaomi EU does not use the correct mix3 vendor.img, that's what causes the issue.
Mackay53 said:
The 3 GSI you mention is a very small sample of the GSI available so you can't say it's an outdated instruction. Have you tested them all like I have? No you haven't.
Xiaomi EU does not use the correct mix3 vendor.img, that's what causes the issue.
Click to expand...
Click to collapse
Ok, I'll put a disclaimer that this only works on RR, PixelExperience, and ArrowOS. Anyway, I'm sure that the latest stable Xiaomi.EU vendor works without any issues with ArrowOS, else why would I be using it as my daily driver.
[deleted, duplicate post]
Someone know if there is a GSI with gapps and that don't have issue with bluetooth?
SafetyPatch module
reasonablebasis said:
5. Install Magisk
a) The Magisk version that passes SafetyNet is the builds from ianmacd https://github.com/ianmacd/MagiskBuilds look for v18.2 (newer versions might work but I haven't tried them yet). You can still use the official Magisk Manager and the ianmacd version will be recognized. Just change the update channel in Magisk to https://goo.gl/yZpnrf. Credits to this thread https://forum.xda-developers.com/mi-...mix-3-t3905754
b) After flashing Magisk, boot, install Magisk Manager, then download and install the module "SafetyPatch". SafetyNet check will now be success.
c) Even though SafetyNet is passed, some banking apps still are not working. Hopefully someone can share a solution (probably MagiskHide Props Config, or canary builds?) to make banking apps work.
Click to expand...
Click to collapse
Mate, I can't find this module via Magisk Manager... Please help!
jonny908 said:
Mate, I can't find this module via Magisk Manager... Please help!
Click to expand...
Click to collapse
You sure? Try searching for "SafetyPatch"
reasonablebasis said:
You sure? Try searching for "SafetyPatch"
Click to expand...
Click to collapse
Strange....
reasonablebasis said:
You sure? Try searching for "SafetyPatch"
Click to expand...
Click to collapse
Issue resolved. I had to use Magisk Manager 7.x.x, I was trying using 6.0.
Installed, MagiskHide working as it should now.
---------- Post added at 18:23 ---------- Previous post was at 18:15 ----------
@reasonablebasis
Sorry for third post in a row., but.... I have no issues with bluetooth audio/music that everyone is talking about. Listening to Spotify on my QCY bluetooth earphones now.....
jonny908 said:
Issue resolved. I had to use Magisk Manager 7.x.x, I was trying using 6.0.
Installed, MagiskHide working as it should now.
---------- Post added at 18:23 ---------- Previous post was at 18:15 ----------
@reasonablebasis
Sorry for third post in a row., but.... I have no issues with bluetooth audio/music that everyone is talking about. Listening to Spotify on my QCY bluetooth earphones now.....
Click to expand...
Click to collapse
On Arrow ?
Wahoux said:
On Arrow ?
Click to expand...
Click to collapse
Yep! Not sure how to prove that though xD
Android Q GSI !
https://www.xda-developers.com/android-q-gsi-project-treble/
Wahoux said:
Android Q GSI !
https://www.xda-developers.com/android-q-gsi-project-treble/
Click to expand...
Click to collapse
Dare to try? xD
jonny908 said:
Dare to try? xD
Click to expand...
Click to collapse
ahah no xD
Right now i'm about to flash Arrow, I hope I won't have bluetooth issue . On the non-GSI Pixel Experience, some reported issue with bluetooth whereas it was working fine for me... so let's see :fingers-crossed:
jonny908 said:
Mate, I can't find this module via Magisk Manager... Please help!
Click to expand...
Click to collapse
jonny908 said:
Issue resolved. I had to use Magisk Manager 7.x.x, I was trying using 6.0.
Installed, MagiskHide working as it should now.
---------- Post added at 18:23 ---------- Previous post was at 18:15 ----------
@reasonablebasis
Sorry for third post in a row., but.... I have no issues with bluetooth audio/music that everyone is talking about. Listening to Spotify on my QCY bluetooth earphones now.....
Click to expand...
Click to collapse
Wow good for you. You flashed xiaomi.eu prior to GSI right? enumerate the steps you did, so that we we hopefully can replicate your success. Hehe
XPOSED and Safety Net PASS -- Instructions How To
I've been using Xposed because it has functionality that I don't want to give up. But "regular" Xposed won't pass Safety Net.
Thanks to @drewcu, I now have found a way to use Xposed and PASS Safety Net.
This is important enough it deserves its own Guide thread. All credit goes to @drewcu -- and of course the edXposed devs! Go here and THANK this post. Full exchange is below, but please go thank @drewcu in that post.
_______
drewcu said:
Installed Magisk and edXposed and all is well.
Thanks!
Click to expand...
Click to collapse
ChazzMatt said:
First hearing about "edXposed". Quick Google search, sounds interesting, and some say it allows you to pass Safety Net, which regular Xposed (I use) doesn't. Is that true?
Which Magisk version are you installing with that?
Click to expand...
Click to collapse
drewcu said:
Latest Magisk 19.3.
YES, EdXposed absolutely passes Safetynet (both ctsProfile and basicIntegrity)! Install instructions here: https://github.com/ElderDrivers/EdXposed but see below for the specific EdXposed version I recommend using.
I personally use magisk-EdXposed-sandhook-v0.4.0.1_beta-SNAPSHOT-release.zip found https://www.lanzous.com/b642738. Newer Sandhook versions with resource hooking like v0.4.1.2_beta and v0.4.2.3_alpha (and the YAHFA versions too) found https://github.com/ElderDrivers/EdXposed/releases introduce some LAG for me that isn't present on 0.4.0.1. Haven't tried newer ALPHA versions like 0.4.3.7 but you are welcome to see if you experience the same lag. Would have to separately install both versions, start opening apps, clicking around, and counting time till the V30 responds to see the lag I am referring to. Is subtle but most noticeable in 0.4.1.2 and less so in 0.4.2.3.
The only Xposed module I use is GravityBox(O) and there is a version specifically for EdXposed -- 8.5.3.1-edxposed (https://github.com/GravityBox/GravityBox/releases/tag/v8.5.3.1-edxposed_o), although I updated to general version 8.5.4 (https://forum.xda-developers.com/xposed/modules/app-gravitybox-v8-0-0-beta-1-tweak-box-t3739929) and have no resource hooking problems with 0.4.0.1 like I thought there might be and had with general version 8.5.3. If you use any OTHER Xposed modules that require resource hooking, you will need to use an EdXposed version 0.4.1.2 or above which has resource hooking but also possibly some lag (perhaps none in the latest alpha I don't know).
So I stay on magisk-EdXposed-sandhook-v0.4.0.1_beta-SNAPSHOT-release because it works with the latest version of GravityBox no problem, has 0 lag unlike newer versions (I think an Oreo problem), and passes Safetynet just fine.
Not sure if some of the steps I took after reading a forum about Safetynet were necessary but I did them anyway -- namely:
1) EdXP Settings - Enable Black/White List
2) Black List Google Play Services and Google Play Store
3) Magisk Hide - ALL of Google Play Services
Enjoy!
Click to expand...
Click to collapse
TotallyAnxious said:
Thanks. I've been meaning to check out the new Xposed offshoots.
Click to expand...
Click to collapse
_________
@drewcu:
edXposed INSTRUCTIONS
Install instructions here: https://github.com/ElderDrivers/EdXposed but see below for the specific EdXposed version I recommend using.
I personally use magisk-EdXposed-sandhook-v0.4.0.1_beta-SNAPSHOT-release.zip found https://www.lanzous.com/b642738. Newer Sandhook versions with resource hooking like v0.4.1.2_beta and v0.4.2.3_alpha (and the YAHFA versions too) found https://github.com/ElderDrivers/EdXposed/releases introduce some LAG for me that isn't present on 0.4.0.1. Haven't tried newer ALPHA versions like 0.4.3.7 but you are welcome to see if you experience the same lag. Would have to separately install both versions, start opening apps, clicking around, and counting time till the V30 responds to see the lag I am referring to. Is subtle but most noticeable in 0.4.1.2 and less so in 0.4.2.3.
The only Xposed module I use is GravityBox(O) and there is a version specifically for EdXposed -- 8.5.3.1-edxposed (https://github.com/GravityBox/GravityBox/releases/tag/v8.5.3.1-edxposed_o), although I updated to general version 8.5.4 (https://forum.xda-developers.com/xposed/modules/app-gravitybox-v8-0-0-beta-1-tweak-box-t3739929) and have no resource hooking problems with 0.4.0.1 like I thought there might be and had with general version 8.5.3. If you use any OTHER Xposed modules that require resource hooking, you will need to use an EdXposed version 0.4.1.2 or above which has resource hooking but also possibly some lag (perhaps none in the latest alpha I don't know).
So I stay on magisk-EdXposed-sandhook-v0.4.0.1_beta-SNAPSHOT-release because it works with the latest version of GravityBox no problem, has 0 lag unlike newer versions (I think an Oreo problem), and passes Safetynet just fine.
Not sure if some of the steps I took after reading a forum about Safetynet were necessary but I did them anyway -- namely:
1) EdXP Settings - Enable Black/White List
2) Black List Google Play Services and Google Play Store
3) Magisk Hide - ALL of Google Play Services
Enjoy!
When I go to download the file, it's in, I assume, Chinese characters.
Any help.
Never mind, figured it out.
This is great. I'm so happy to have Gravity Box again.
I too had a problem with lag with newer versions of edxposed. I switched to the version recommend in the OP and all is well.
If you comfortable using "chinese" app. Taichi is simpler solution (personally), although not much modules currently supported. Both edxposed and taichi are available on magisk repo
Thanks @ChazzMatt, finally got around to installing Xposed again. Thank god for GravityBox!
edit: after playing around for a day, I'm disabling edx. I'm getting lag, force closes, unresponsive back button, and major battery drain. Sad to see the framework hasn't changed much in 1-2 years. It's not worth it for a single Xposed module.
Gravitybox system framework not respondinhlg.
On us996k
Guess I'm missing something?
qwas7899 said:
Gravitybox system framework not respondinhlg.
On us996k
Guess I'm missing something?
Click to expand...
Click to collapse
Edit; figured it out
qwas7899 said:
Edit; figured it out
Click to expand...
Click to collapse
share with the class.
Right. Didn't have riru-core module installed.
Thanks a lot for this guide . It's great to have xposed and safety net passing.
soo I tried to install edxposed sandhook (latest version), after a couple reboot, all went fine, but now I lost wifi and data connection (they cant be turned on), any ideas or fix? is it linked to that version of edxposed? I have a Lg ls998 converted to Us998h, thank you
LeTerrible said:
Just wanted to share my experience with NFC banking and FullHD working Netflix. Managed to delete everything google and installed Microg only (to get Gcam to work), my banking app, Netflix app, Canary EdXposed and it works flawlessly! Could never get FullHD and NFC banking to work previously with Xposed. Of note was the fact I am running Xprivacy, too. Just make sure you blacklist the apps in EdXposed and also hide them in Magisk and it all works
Hope this helps others as it really made my NoGapps/Rooted stock phone experiences significantly better.
Click to expand...
Click to collapse
Great.
I'm having trouble getting EdXposed to activate. I'm on a fresh clean install of the TWRP flashable version of US998 30b with Magisk 20.1 installed and working, and while i've got the Riru - Core module installed (v19.5), no matter which Riru - Ed Xposed module I use I get the following error message from EdXposed Manager 4.5.2 explaining why it's installed but not activated:
There seems to be a known issue("Wrong base directory: /mnt/expand/7f941a12-b7aa-4d2a-a664-f89a46b7d86c/user_de/0/org.meowcat.edxposed.manager") with your ROM.
Suggestions on where I go from here?
radwolf76 said:
I'm having trouble getting EdXposed to activate. I'm on a fresh clean install of the TWRP flashable version of US998 30b with Magisk 20.1 installed and working, and while i've got the Riru - Core module installed (v19.5), no matter which Riru - Ed Xposed module I use I get the following error message from EdXposed Manager 4.5.2 explaining why it's installed but not activated:
There seems to be a known issue("Wrong base directory: /mnt/expand/7f941a12-b7aa-4d2a-a664-f89a46b7d86c/user_de/0/org.meowcat.edxposed.manager") with your ROM.
Suggestions on where I go from here?
Click to expand...
Click to collapse
Solution Found. My EdXposed Manager had been installed to External Storage. It only works on Internal Storage.
Safety Net Fail w/ Gravitybox
It looks like as soon as I enable the Gravitybox module that you recommend, safetynet fails. Are you still passing with your setup (I'm wondering if there has been some update that this version of Gravitybox no longer passes)?
UPDATE: even though safetynet shows up as failing in Magisk, I am still able to use Google Pay, so maybe it is working? I'll update this post once I've tried using Google Pay to pay for something.
UPDATE again: after a couple of days, Google Pay showed a pop up message saying that it would no longer work. Uninstalling and reinstalling gets it working temporarily again it seems.
Dear @ChazzMatt
Should I install the old beta in the last page or the latest canary to avoid safety net and which versions is the best?
Note to everyone: installing xposed framework will trigger safetynet....and uninstalling it will do as well
And i don't know how to solve this except flashing a new rom
Lightheart 1.0 - The key to speed.
Hi everyone. My name is Skulldron and for those of you who do recognise me, know me as the creator of Project Pixel, another one of the greatest ways to emulate the Pixel Experience, whilst keeping all the benefits of using OneUI and its stock optimized drivers as its base. Today I'm going to introduce something, different. Over the years of working on Touchwiz based ROMs, I've learnt the description of every little apk, every little permission, what it accepts and what it rejects, its pros and its cons. As a result of this experience, I have one of the best debloat lists out there, with each item on the debloat list, being tested, through extensive testing, and it goes over every file and every partition known in the OneUI OS. This exact same debloat script was used in Project Pixel, which has received positive review after positive review for how efficient and how lightweight OneUI became after the debloat. Today however, I present to you Lightheart OS, a new project that I will be building myself and updating monthly. Today I showcase Lionheart, the Lineage OS to my Cyanogenmod.
Key Features:
1. Heavily Debloated System: The debloat script that was made by me, has over 250+ debloated permissions, apks and other files.
2. Better Battery Performance due to Efficiency - With the removal of an incredible amount of bloat, along with better performance and lesser services, you should be looking at better SOTs and better standby times.
3. Kernel Power Control: With MTweaks and Magisk, you will be able to control your device’s clock speed and be able to force higher GPU and CPU Clock, when doing more intensive tasks such as gaming.
4. Better Kernel Performance - Due to the deepness of the debloat, the kernel now has more RAM and more space to be more efficient and allow it to focus on less threads at once.
5. Latest available patch with the promise of updates every month - Every month an update is released, the ROM will be updated along with it, with a time frame of 1-2 weeks.
6. Restored some stock Google Permissions - Some stock google framework was restored, such as the default setup wizard.
7. All Essential Samsung Features have been kept - All essential OneUI features have been kept alive, for the sole purpose of necessity.
8. Completely Deknoxed -The ROM has been Deknoxed and FRP lock measures have been disabled
9. VoLTE Supported
Individual Features:
1. AdAway
2. Eleven Music
3. Files GO
4. GBoard
5. Android Pie AOSP Emojis
6. Lightheart X Boot Animation
7. AOSP System Sounds
8. Samsung Gallery (Stripped Down and lightened to improve performance)
9. Samsung's Stock Camera with HDR parameter changes, debloated and additional video modes
10. SystemUI Tuner (Provides battery stats along with other useful customizations - Check QS icons and add it to QS Panel to view)
11. YouTube Vanced (Ad-free Youtube)
12. Mtweaks (Has Hardware Control - Similar to Kernel Adiutor but more tailored to Exynos)
INSTALL INSTRUCTIONS: (Backup everything,contacts, photos etc.)
1. Download the zip and download the latest Magisk (ROM will not boot if Magisk is not flashed due to encryption procedures)
2. Wipe System, Data, Dalvik Cache and Cache
3. Flash the zip and flash Magisk.
Notes:
- To view Battery Stats and Storage, pull down the Quick Settings Panel and on the top right click the three bubbles button and then Button Order. Then move the new Battery and Storage icon to the Quick Settings.
- Set Trebuchet as default launcher, for better battery savings. OneUI Home was only included for its app switcher.
Changelog:
1.0 - Initial Release
If changes are made, they will be highlighted in the next post.
Download Links:
1. Lightheart 1.0:
https://drive.google.com/file/d/1cqQXrQecOmmXEhXnUx6GL8aV7_Xsarwk/view?usp=sharing
2. Magisk Manager:
https://github.com/topjohnwu/Magisk/releases
3. Magisk:
https://github.com/topjohnwu/Magisk/releases/tag/v20.4
Credits and kernel source:
Cronos Kernel Source: https://github.com/ananjaser1211/Cronos_8890/releases/tag/V4.0-Pie
@arcatarc for permission to use his base
Check the screenshots tab to see screenshots of the ROM in action.
XDA:DevDB Information
Lightheart 1.0, ROM for the Samsung Galaxy S7
Contributors
Skulldron
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
ROM Firmware Required: Latest Bootloader Available
Based On: OneUI
Version Information
Status: Stable
Current Stable Version: 1.0
Stable Release Date: 2020-10-30
Created 2020-10-30
Last Updated 2020-10-31
Samsung note fe base???
Hi, thanks for the ROM. Will try it. Could you please provide md5?
Can't use GPay
mie_ayam said:
Samsung note fe base???
Click to expand...
Click to collapse
Yes it is running the base from a Note FE. In particular the SuperLegerra ROM
wow, ... and echo cancellation works perfect ... but two things that I miss so far
the option "kill app back button" in the settings -> developer options ... please don't forget to build-in
the possibility to mount the SD card in the file system
Both options are default in LOS ... and yes, I know it was an initial release.
Thx for your work. we are hopefully waiting for the improvements!
:good::good::good:
Download and trying to install tonight
Info regarding phone stuck on boot pic
Hi there,
I have little experience with custom roms etc. I had installed LineageOS some moths ago as my phone was working poorly on stock rom and now with LOS 17.1 was starting to have problems again. Like an hour ago decided after some research to install this rom. However, after flasing the rom and magisk (I couldnt flash Gapps as error 20 appeared), my phone got completely stuck on boot picture (SAMSUNG GALAXY S7; POWERED BY ANDROID). I have both tried to get into twrp (previously installed) and download mode. No luck in any of the cases. I have tried to do the same from odin, to flash again twrp. However, as I cannot access download mode, I didnt work.
Now, I´m trying my best to figure out how to install some OS and continue from there, or at least be able to flash twrp and install another ROM.
I would much appreciate any advice in the matter.
Thanks in advance.
EDIT: NEW SITUATION. No need of help anymore (by now)
iggamez said:
Hi there,
I have little experience with custom roms etc. I had installed LineageOS some moths ago as my phone was working poorly on stock rom and now with LOS 17.1 was starting to have problems again. Like an hour ago decided after some research to install this rom. However, after flasing the rom and magisk (I couldnt flash Gapps as error 20 appeared), my phone got completely stuck on boot picture (SAMSUNG GALAXY S7; POWERED BY ANDROID). I have both tried to get into twrp (previously installed) and download mode. No luck in any of the cases. I have tried to do the same from odin, to flash again twrp. However, as I cannot access download mode, I didnt work.
Now, I´m trying my best to figure out how to install some OS and continue from there, or at least be able to flash twrp and install another ROM.
I would much appreciate any advice in the matter.
Thanks in advance.
EDIT: NEW SITUATION. No need of help anymore (by now)
Click to expand...
Click to collapse
Could you write down here how you can solved the proble, it might be helpfull for other.
Hi All, has anyone got EdXposed working?
I've installed magisk 21.1, riru core 21.3 , and riru YAHFA 0.4.6.4 EdXposed manager shows framework not active :/
Does mobile hotspot work?
I've been looking for a ROM that has kept the Samsung gallery and camera so I want to try this ROM. but I need to be able to use mobile hotspot so please let me know if it works fine. Thx
Hello, the ROM works great. There are some minor things. Like always on display does not work with option to tap the screen to show for 10 seconds. Also for some reason I can't instal Revolut from the play store. And lastly Titanium backup does not restore all the apps. I could not figure out a way how to make that work.
The hotspot works fine on mine.
I had the same issue with Titanium backup.
In the end I used split screen and installed each app from the play store, then restored data only.
Has anyone got xposed working?
Gapps
Do I need to flash gapps or is it included?
I'm currently using lineage is 16 with gapps. Do I need to flash gapps again if flashing a ROM again? Sorry I'm a newbie.
Wara35 said:
Do I need to flash gapps or is it included?
I'm currently using lineage is 16 with gapps. Do I need to flash gapps again if flashing a ROM again? Sorry I'm a newbie.
Click to expand...
Click to collapse
No gapps needed.
---------- Post added at 03:59 PM ---------- Previous post was at 03:52 PM ----------
@Skulldron, thanks for the ROM, works great and it's stable. Just few things. Could you please update the Adaway app? There is a newer stable version on xda available. I tried to update it myself but it was not possible. Also could you please fix the Always on display function? The tap on screen option does not work.
Blato said:
Hello, the ROM works great. There are some minor things. Like always on display does not work with option to tap the screen to show for 10 seconds. Also for some reason I can't instal Revolut from the play store. And lastly Titanium backup does not restore all the apps. I could not figure out a way how to make that work.
Click to expand...
Click to collapse
As I experienced from other ROM that based on Note FE base, the Galaxy S7 cant show AOD with tap to show mode due to hardware problem, so please choose always show option on the setting
Flashing a different rom, I do like this rom but need xposed and it's annoying that YouTube and adaway are system apps.
6sicSIX said:
Flashing a different rom, I do like this rom but need xposed and it's annoying that YouTube and adaway are system apps.
Click to expand...
Click to collapse
Youtube and Adaway can be removed with System App remover or Link2sd from Play Store. Then you restart the S7 and install Adaway from github and Vanced.app
I do like this rom, espicially the first boot right after install, which was really fast, made an impression. Probably the most battery friendly and lite-weight One UI-Rom one can find. One usability problem for me was the *missing feature that increased touch sensitivity*. With my screenprotector on, I have to push harder and several times before successfully pulling down the notification bar or when writing or selecting.
Is it just me or is SmartSwitch taking a long time/not restoring messages? I get to the part when it would start restoring messages but then it just never loads.. other then that, the ROM is great!
6sicSIX said:
Hi All, has anyone got EdXposed working?
I've installed magisk 21.1, riru core 21.3 , and riru YAHFA 0.4.6.4 EdXposed manager shows framework not active :/
Click to expand...
Click to collapse
I tried many versions of modules ,but no luck .Is possible to work exposed framework?
Disclaimer
Your warranty will be void
Some carriers' Terms of Service prohibit device modifications
Modifying will trip Samsung Knox and SafetyNet, so be aware that some apps will cease to work
I AM NOT RESPONSIBLE FOR BRICKED DEVICES, FAILED ATTEMPTS AND OTHER CAUSES OF IMPROPER USAGE OF THIS GUIDE!Now that we got that out of the way, we can continue.
Unlocking the BootloaderUNLOCKING THE BOOTLOADER WILL ERASE ALL OF YOUR DATA!
Go into Settings > About Phone > Software Information
Find Build Number and quickly tap it 7 times. This will enable Developer Options
Find OEM Unlocking and USB Debugging options and enable them
Turn off the phone
Hold Volume Up and Volume Down while connecting your phone to a PC to boot into Download Mode
Read the Warning carefully to understand it and then if you want to continue press Volume Up
On the Unlock Bootloader screen, press and hold the Volume Up button one more time (This is the step that erases all of your data, if you don't want to do it, now is the time to turn back!)
After the automatic reboot, repeat steps 1. - 3. and make sure that OEM Unlocking is greyed out and enabled
Congratulations! You bootloader is now unlocked.
Flashing a Custom RecoveryCredit to @BlackMesa123 for this guide.
Rooting your Phone
Download the latest version of Magisk on your Computer
Follow the Official Installation Guide from Magisk developers
Flashing a GSI (Generic System Image)
Choose a GSI from this List
Power Off your phone and connect it to your Computer
Hold Volume Up and Power buttons, after the logo appears, release only the Power button, this will boot you into TWRP
Do a Wipe and transfer the GSI file from you Computer to your Phone
Click Install >Image Flashing, find your transferred GSI file and tap on it.
Toggle the System Image option and flash the file.
After flashing Format Data to be able to boot into your new System.
I know your Camera doesn't work, don't worry check out this Post to get it to work again.
Useful Resources
A52s bootloader/modem collection repository
OrangeFox Recovery
SafetyNet Fix for Magisk (Zygisk)
Custom ROMs: RayOS (One UI 4.1), NcX (One UI 5.0)
Mesa's Custom Kernel
Credit to @BlackMesa123 @Ryzen5950XT @ShaDisNX255 for the additional resources.
That's it! Thank you for following the guide and enjoy your unlocked Samsung.
This is very helpful thanks
Thank you for the guide. Here's some additional resources/changes that can be added in the post:
- A52s bootloader/modem collection repository
- OrangeFox Custom Recovery, same as TWRP but with a different UI
- SafetyNet and (some) Knox features can still work with the correct adjustments. See the SafetyNet fix for Magisk (Zygisk) or custom ROM's such as RayOS (One UI 4.1), NcX (One UI 5.0)
- Mesa's Custom Kernel, greatly improves device's performance
Hoping to see the list enhanced soon.
BlackMesa123 said:
Thank you for the guide. Here's some additional resources/changes that can be added in the post:
- A52s bootloader/modem collection repository
- OrangeFox Custom Recovery, same as TWRP but with a different UI
- SafetyNet and (some) Knox features can still work with the correct adjustments. See the SafetyNet fix for Magisk (Zygisk) or custom ROM's such as RayOS (One UI 4.1), NcX (One UI 5.0)
- Mesa's Custom Kernel, greatly improves device's performance
Hoping to see the list enhanced soon.
Click to expand...
Click to collapse
Thank you for the links, thread is now updated.
Quick question, with MCK, should I wipe everything before/after flashing and will it work with PE+ GSI?
kzyx said:
Thank you for the links, thread is now updated.
Quick question, with MCK, should I wipe everything before/after flashing and will it work with PE+ GSI?
Click to expand...
Click to collapse
You shouldn’t wipe anything when flashing the kernel. If the stock kernel works fine, I don’t see why mine shouldn’t
Everything is working perfectly, thanks for the guide. I installed the PixelExperience GSI but for some reason Fingerprint sensor is not working. The process is stuck on "Touch the sensor" and the sensor is not lighting up. Yes, I set the color of fingerprint sensor to White (and even tried all other colors).
I even have the following options checked
- Enable Extra Sensor
- Enable workaround for broken fingerprint sensor
- Enable workaround for white-ish screen
Any help will be appreciated, thanks.
Mian-786 said:
Everything is working perfectly, thanks for the guide. I installed the PixelExperience GSI but for some reason Fingerprint sensor is not working. The process is stuck on "Touch the sensor" and the sensor is not lighting up. Yes, I set the color of fingerprint sensor to White (and even tried all other colors).
I even have the following options checked
- Enable Extra Sensor
- Enable workaround for broken fingerprint sensor
- Enable workaround for white-ish screen
Any help will be appreciated, thanks.
Click to expand...
Click to collapse
I don't know what could be the issue, maybe try to google or try disabling and enabling the fingerprint lock again.
I have tried few GSI Roms. Here is my summary:
Android 13
- AOSP, Android 13, No image with GAPPs pre-installed and cannot seem to install it. Tried NikGAPPs, and LiteGAPPs, both didn't work
- Google GSI, Android 13, same issue
- Pixel Experience, Android 13, GAPPs pre-installed but Fingerprint sensor won't get detected.
Android 12
- AOSP, Android 12, GAPPs pre-installed, Fingerprint sensor detected (changing color to white). Will stick to it unless there is an issue detected.
Mian-786 said:
I have tried few GSI Roms. Here is my summary:
Android 13
- AOSP, Android 13, No image with GAPPs pre-installed and cannot seem to install it. Tried NikGAPPs, and LiteGAPPs, both didn't work
- Google GSI, Android 13, same issue
- Pixel Experience, Android 13, GAPPs pre-installed but Fingerprint sensor won't get detected.
Android 12
- AOSP, Android 12, GAPPs pre-installed, Fingerprint sensor detected (changing color to white). Will stick to it unless there is an issue detected.
Click to expand...
Click to collapse
Thanks for the feedback, have you tried any ROMs instead of GSIs?
You have links for them in this thread.
kzyx said:
Thanks for the feedback, have you tried any ROMs instead of GSIs?
You have links for them in this thread.
Click to expand...
Click to collapse
Nope, I tried to find a good custom rom for A52s but couldn't find any.
What about volte and hotspot on GSI pixel experience 13?
Mian-786 said:
I have tried few GSI Roms. Here is my summary:
Android 13
- AOSP, Android 13, No image with GAPPs pre-installed and cannot seem to install it. Tried NikGAPPs, and LiteGAPPs, both didn't work
- Google GSI, Android 13, same issue
- Pixel Experience, Android 13, GAPPs pre-installed but Fingerprint sensor won't get detected.
Android 12
- AOSP, Android 12, GAPPs pre-installed, Fingerprint sensor detected (changing color to white). Will stick to it unless there is an issue detected.
Click to expand...
Click to collapse
Thanks for your summary,
Is there any experience with MicroG on this device with AOSP 13?
7slaper said:
Thanks for your summary,
I'm on AOSP 13 now, but perhabs it's better to go back to 12. I'm very interested in the AOSP with the GAPPs pre-installed. Could you share a link to the file?
Click to expand...
Click to collapse
I got the image from AOSP under the official Android 12/12L section. You can find release here. The exact image I got is the system-squeak-arm64-ab-vndklite-gapps-secure.img.xz one since the standard gapps one came with an app called "superuser" which I couldn't seem to uninstall (I tried the scripts to remove supersu). This caused my banking apps to not run. That is why I installed the "secure" one and then installed Magisk and added my banking apps to the defylist.
Zhazhael said:
What about volte and hotspot on GSI pixel experience 13?
Click to expand...
Click to collapse
I think VoLTE was available as an option in one of the ROM I tested but I don't remember exactly. Currently AOSP 12 doesn't support it. Hotspot worked on every ROM just fine.
Mian-786 said:
I got the image from AOSP under the official Android 12/12L section. You can find release here. The exact image I got is the system-squeak-arm64-ab-vndklite-gapps-secure.img.xz one since the standard gapps one came with an app called "superuser" which I couldn't seem to uninstall (I tried the scripts to remove supersu). This caused my banking apps to not run. That is why I installed the "secure" one and then installed Magisk and added my banking apps to the defylist.
Click to expand...
Click to collapse
Hi Mian,
Thanks for your response. When I typed my question I realized that in the end I want to have and de-googled phone. So I changed my question in the direction of MicroG. I didn't expect you to be so quick with answering.
7slaper said:
Hi Mian,
Thanks for your response. When I typed my question I realized that in the end I want to have and de-googled phone. So I changed my question in the direction of MicroG. I didn't expect you to be so quick with answering.
Click to expand...
Click to collapse
I haven't tried MicroG in any of the ROM. I just to have as little Google apps as possible but if you do find a good guide, let me know, I will try to use a de-googled phone.
Thx, all worked.
Mian-786 said:
I haven't tried MicroG in any of the ROM. I just to have as little Google apps as possible but if you do find a good guide, let me know, I will try to use a de-googled phone.
Click to expand...
Click to collapse
I've installed MicroG. But it seems AOSP doen't allaw support system spoofs signature. Play services (GmsCore) is installed but without the spoofed signature it can't do much I guess...
I have been using AOSP Android 12 for the past week or so. Most of the things just plain works but somethings don't. Here is the list of things that are not working so you can decide if the hassle of installing GSI is worth it or not.
- Proximity Sensor is worse than it was in OneUI. Yes, it is a virtual sensor but on OneUI, it worked better. Now, it is worse. More often than not, it turns on the screen during the call. It would have been better if it simply didn't work.
- The viewport of default camera App in the AOSP displays picture in 4:3 but the camera hardware is giving out 16:9, so the viewport was squeezed. After installing GCam everything is good.
- Fingerprint Sensor simply doesn't work in-app like those in banking apps. It works on the lock screen but nowhere else.
- USB Audio Devices don't work. I have a USB-C to A OTG where I used to insert my headphones. On OneUI they used to work but here they don't. Storage devices work.
- 120 Hz felt smoother on OneUI.
Hello everyone
I managed to install LineageOS with working GApps and camera using this guide, so a big thanks to everyone who worked on flashing this phone
If anyone wants to install it, you need to:
Chose a bgN package (I installed this one : https://sourceforge.net/projects/an...UNOFFICIAL-arm64_bgN-vndklite.img.xz/download). It includes the GApps. You won't be able to install GApps after installing a vanilla (bvS / bvN) package. For some reasons, the /system partition is too small.
For unlocking camera and install magisk, just flash this kernel : https://forum.xda-developers.com/t/kernel-12-13-a528b-n-mesas-custom-kernel-r4.4490653/
I also installed magiskhide prop conf module, but I'm not sure it changed anything and the camera fix was probably already in the MCK. You can find it here anyway : https://forum.xda-developers.com/t/...safetynet-prop-edits-and-more-v6-1-2.3789228/