Develop Bugs

v4A on magisk16.4 may update?

Has anyone been able to get a v4a module working on 16.4 and the may update? I tried installing the module by viper50 and ahirion that has worked so well in the past... Doesn't seem to be enabling for me this time around for some reason. Any ideas?
Or other mods to recommend?

V4a v2.5.05 working fine with magisk 16.4 and may update here.

EnIXmA said:
V4a v2.5.05 working fine with magisk 16.4 and may update here.
Click to expand...
Click to collapse
Same here, everything working smoothly with v4afx_v1.6.9.zip and magisk 16.4. Viper also works on P dp2.

Taebom said:
Same here, everything working smoothly with v4afx_v1.6.9.zip and magisk 16.4. Viper also works on P dp2.
Click to expand...
Click to collapse
Are you flashing in magisk or twrp? Which module are you using? Thanks!

I'm neither of the other posters, but flash V4A via Magisk using the module authored by Viper520, ZhuHang, Ahrion, and Zackptg5. Be certain that you select the new driver and the materialized version of the app for V4A to work properly.

Strephon Alkhalikoi said:
I'm neither of the other posters, but flash V4A via Magisk using the module authored by Viper520, ZhuHang, Ahrion, and Zackptg5. Be certain that you select the new driver and the materialized version of the app for V4A to work properly.
Click to expand...
Click to collapse
This ^^ : point upwards: ! Especially the underlined part; it took me a whole lot of trial and error to figure this last part out...
In any case, I used the latest Magisk module (if you check the details of the modules, it'll show when it was last updated). If anything, supposedly you could just install straight away, but V4A gave me errors. I had to uninstall the existing V4A, reboot, install via Magisk module, and reboot before it worked. You (@Cowbell_Guy) might, at the very least, have to walk through the same steps for whatever reason...
Hope this helps...

General EdXposed OnePlus9 Pro Android 11 Working set

Those of you who must have EdXposed for your Op9pro(android 11). Flash https://github.com/RikkaApps/Riru/releases/download/v25.4.4/riru-v25.4.4-debug.zip in magisk manager followed by a reboot. Then download and flash https://github.com/ElderDrivers/EdX...EdXposed-YAHFA-v0.5.1.4_4655-master-debug.zip followed by reboot, Lastly download and install https://github.com/ElderDrivers/EdX...5700-org.meowcat.edxposed.manager-release.apk and just for good measure reboot again. This is the only working set i could get EdXposed manager to Acknowledge a successful install for my OP9 pro(Android11) Install at your own risk! im not sure of any other working sets, I personally have not had to Msm or factory out of any tantrums from my device as of yet, So if this is a MUST HAVE for your 9pro here you go!! your welcome.

It is easier to download LSPosed in magisk and flash it then reboot. Open LSPosed app and download the modules you like to try. I'm running GravityBox (R) whitout any issues.

Smedslund said:
It is easier to download LSPosed in magisk and flash it then reboot. Open LSPosed app and download the modules you like to try. I'm running GravityBox (R) whitout any issues.
Click to expand...
Click to collapse
A sad fact is that LSPosed developers are constantly splitting the Xposed community. LSPosed is the first product of plunder. No one should support this behavior, so don't install and use LSPosed.
In addition, after receiving multiple feedbacks, users have experienced system and application crashes, soaring memory occupation and other errors to varying degrees after installing LSPosed.

mlgmxyysd said:
A sad fact is that LSPosed developers are constantly splitting the Xposed community. LSPosed is the first product of plunder. No one should support this behavior, so don't install and use LSPosed.
In addition, after receiving multiple feedbacks, users have experienced system and application crashes, soaring memory occupation and other errors to varying degrees after installing LSPosed.
Click to expand...
Click to collapse
Sorry, but you are wrong. End of discussion.

mlgmxyysd said:
A sad fact is that LSPosed developers are constantly splitting the Xposed community. LSPosed is the first product of plunder. No one should support this behavior, so don't install and use LSPosed.
In addition, after receiving multiple feedbacks, users have experienced system and application crashes, soaring memory occupation and other errors to varying degrees after installing LSPosed.
Click to expand...
Click to collapse
I have no errors memory occupation etc. Runs smooth. Also everyone mentions this plunder and no one actually states what they have done. Edxposed hasn't been updated in ages. Lspose has mage a zygisk to work with new magisk. Please let me know what the have done. I know there is a parisitic mode which I don't use bc of things it could do but besides that please explain wth they did?

toolhas4degrees said:
I have no errors memory occupation etc. Runs smooth. Also everyone mentions this plunder and no one actually states what they have done. Edxposed hasn't been updated in ages. Lspose has mage a zygisk to work with new magisk. Please let me know what the have done. I know there is a parisitic mode which I don't use bc of things it could do but besides that please explain wth they did?
Click to expand...
Click to collapse
EdXposed vs Lsposed
I'm not clear on the differences between them, and it seems that there are even more alternatives. Is one better than another? I just got an Android 10 phone, was previously on 7 for a short time, but was otherwise still on 5 and 6.
forum.xda-developers.com

So athe dev made a prank? Why not just say what it is. Are you saying the permission prank. That is probably part of the parisitic end of lsposed which every user has the ability to enable or not.
I have asked this several times and haven't really gotten a valid answer. Also if it is malicious why is the app still on Google play?

jwidel said:
Those of you who must have EdXposed for your Op9pro(android 11). Flash https://github.com/RikkaApps/Riru/releases/download/v25.4.4/riru-v25.4.4-debug.zip in magisk manager followed by a reboot. Then download and flash https://github.com/ElderDrivers/EdX...EdXposed-YAHFA-v0.5.1.4_4655-master-debug.zip followed by reboot, Lastly download and install https://github.com/ElderDrivers/EdX...5700-org.meowcat.edxposed.manager-release.apk and just for good measure reboot again. This is the only working set i could get EdXposed manager to Acknowledge a successful install for my OP9 pro(Android11) Install at your own risk! im not sure of any other working sets, I personally have not had to Msm or factory out of any tantrums from my device as of yet, So if this is a MUST HAVE for your 9pro here you go!! your welcome.
Click to expand...
Click to collapse
Thanks jwidel. After hours of headaches, bootloops, bricking, and MSMDownloadTool attempts, your post got me EdXposed on my OnePlus. Many, many thanks.

Question SafetyNet fails with LSPosed or EDXposed

I'm currently still using stock MIUI 12.5.5 (Android 11).
With Magisk, my phone could still pass SafetyNet without additional Magisk modules. However, I needed to install LDPosed or EDXposed in order to use the NoWakeLock xposed module. Well, I tried both and they install fine, but fail SafetyNet.
My understanding is that LDPosed is supposed to be more reliable and better compared to EDXposed, one of the reason being is that EDXposed will fail SafetyNet, whereas LDPosed won't...
I've tried using Magisk Props and a few SafetyNet related patches. They installed fine but I still fail SafetyNet. Those patches work fine for my other phone running on stock MIUI 12.5.3.
Just wondering has anyone tried setting up Xposed on their phone, specifically stock ROM, and got it to pass SafetyNet?

Installed " fix safety" works is LSposed.
i dont know if it works with edxposed
and check "Magisk hide" in Magisk manager.
Release v2.1.1 · kdrag0n/safetynet-fix
Changes Fixed under-display fingerprint on OnePlus devices (@osm0sis) Donate If you found this helpful, please consider supporting development with a recurring donation for rewards such as early ...
github.com

jc-b said:
Installed " fix safety" works is LSposed.
i dont know if it works with edxposed
and check "Magisk hide" in Magisk manager.
Release v2.1.1 · kdrag0n/safetynet-fix
Changes Fixed under-display fingerprint on OnePlus devices (@osm0sis) Donate If you found this helpful, please consider supporting development with a recurring donation for rewards such as early ...
github.com
Click to expand...
Click to collapse
Tried both already. Works on other phones but not on this one. Tried in both stock MIUI and GSI OctaviOS.

[q] Gpay on lineage 19.1

Hey guys, has anyone gotten Gpay to work on lineage 19.1? I have done the following and have had very odd results. Firstly, I am passing safteynet and my device is registered as play certified in Google play store. I'm seeing where sometimes gpay won't open at all and when it does it says it is unable to load my payment methods.
Specs:
OS - linageOS 19.1 (latest build as of this post)
GAPPS - Mindthegapps (latest build as of this post)
Steps taken:
Installed magisk, enabled zygisk and rebooted
Installed magisk hide props module then rebooted
Installed shamiko module then rebooted
Installed universal safteynet fix (zygisk) then rebooted
Configured denylist in magisk checking GPS (all), and Gpay (all) rebooted
Changed device fingerprint with magisk hide props module to a certified one then rebooted
Additional steps taken:
I cleared data from GPS, play store and Gpay and rebooted
I tried a different device fingerprint and rebooted (clearing data like above afterwards and rebooting again)
I have done a complete fresh install of my OS and tried again from scratch.
I also tried seeing is renaming magisk would help at all, it didn't
It appears I'm getting nowhere with this. If anyone has gotten it to work and has some insight it's be greatly appreciated!

Nevermind, looks like it was an issue from having the pixelify module installed as well. After I removed it it started working just fine.

deathblade said:
Nevermind, looks like it was an issue from having the pixelify module installed as well. After I removed it it started working just fine.
Click to expand...
Click to collapse
Hey deathblade!
Thanks for helping me out on the other thread.
Just wanted to check in, did you use the official build or the unofficial one with the Pixel Goodies? I'm intending/hoping to have full functionalities of Google Pay using the unofficial build, but from your post it seems that I can't have the Pixel experience if I want the ROM to work with Google Pay?

HW898 said:
Hey deathblade!
Thanks for helping me out on the other thread.
Just wanted to check in, did you use the official build or the unofficial one with the Pixel Goodies? I'm intending/hoping to have full functionalities of Google Pay using the unofficial build, but from your post it seems that I can't have the Pixel experience if I want the ROM to work with Google Pay?
Click to expand...
Click to collapse
I'm using the official build. I think the unofficial has everything needed to use Gpay and have some pixel things baked in. So might be worth a look in your case

deathblade said:
I'm using the official build. I think the unofficial has everything needed to use Gpay and have some pixel things baked in. So might be worth a look in your case
Click to expand...
Click to collapse
Aite, I will try out the unofficial one and see if GPay works there too. Thanks for the headsup!

HW898 said:
Aite, I will try out the unofficial one and see if GPay works there too. Thanks for the headsup!
Click to expand...
Click to collapse
I just remembered, the unofficial is setup to pass safteynet out the box, but more maybe needed for Gpay to work. Once you flash it try it out, if you run into issues I can provide what I did to get Gpay working

deathblade said:
Nevermind, looks like it was an issue from having the pixelify module installed as well. After I removed it it started working just fine.
Click to expand...
Click to collapse
Hi there, trying out the official build after experiencing some problems on the unofficial one. Any alternatives to pixiel-ing the ROM?

HW898 said:
Hi there, trying out the official build after experiencing some problems on the unofficial one. Any alternatives to pixiel-ing the ROM?
Click to expand...
Click to collapse
Not that I've found, however I did notice if you install the pixelify module then uninstall it, it does seem to leave some stuff behind. Like I still have the option to use Hold for me and direct my call. So it might work out where you can install it to get the things you want then remove it to get Gpay working

deathblade said:
Not that I've found, however I did notice if you install the pixelify module then uninstall it, it does seem to leave some stuff behind. Like I still have the option to use Hold for me and direct my call. So it might work out where you can install it to get the things you want then remove it to get Gpay working
Click to expand...
Click to collapse
I see... So these also means stuff like Now playing etc. will be gone too right?
Also, did you experience the problems I've faced in the unofficial build? sounds cannot change etc. as posted in main thread

HW898 said:
I see... So these also means stuff like Now playing etc. will be gone too right?
Also, did you experience the problems I've faced in the unofficial build? sounds cannot change etc. as posted in main thread
Click to expand...
Click to collapse
Nope now playing is still there. I really only used it the module to force call screening to show up. But I have pretty much everything I remember from stock plus a few phone related goodies. I never tried the unofficial build but on the official I do not have that issue

deathblade said:
Nope now playing is still there. I really only used it the module to force call screening to show up. But I have pretty much everything I remember from stock plus a few phone related goodies. I never tried the unofficial build but on the official I do not have that issue
Click to expand...
Click to collapse
I see... I will try installing the official one without magisk as I won't want to meddle with rooting stuff for now, will get back with results asap!

deathblade said:
Hey guys, has anyone gotten Gpay to work on lineage 19.1? I have done the following and have had very odd results. Firstly, I am passing safteynet and my device is registered as play certified in Google play store. I'm seeing where sometimes gpay won't open at all and when it does it says it is unable to load my payment methods.
Specs:
OS - linageOS 19.1 (latest build as of this post)
GAPPS - Mindthegapps (latest build as of this post)
Steps taken:
Installed magisk, enabled zygisk and rebooted
Installed magisk hide props module then rebooted
Installed shamiko module then rebooted
Installed universal safteynet fix (zygisk) then rebooted
Configured denylist in magisk checking GPS (all), and Gpay (all) rebooted
Changed device fingerprint with magisk hide props module to a certified one then rebooted
Additional steps taken:
I cleared data from GPS, play store and Gpay and rebooted
I tried a different device fingerprint and rebooted (clearing data like above afterwards and rebooting again)
I have done a complete fresh install of my OS and tried again from scratch.
I also tried seeing is renaming magisk would help at all, it didn't
It appears I'm getting nowhere with this. If anyone has gotten it to work and has some insight it's be greatly appreciated!
Click to expand...
Click to collapse
Just also wanted to clarify in the case I decide to install magisk, which module do you install exactly? All of them? Zygisk/hide props module/shamiko/universal safetynet fix?

HW898 said:
Just also wanted to clarify in the case I decide to install magisk, which module do you install exactly? All of them? Zygisk/hide props module/shamiko/universal safetynet fix?
Click to expand...
Click to collapse
Ok so here is the breakdown:
Zygisk is not a module, but an implementation method used by modules. Magiskhide props is used to change the device fingerprint to a valid one that registers as protected by google play. Shamiko is for hiding root from Google play services, and Gpay (and whatever other apps may need it). Universal safteynet fix is used to help pass google safteynet checks (security). Not listed is the pixelify module used to add pixel exclusive features but of course with it install it cause havoc on Gpay and other apps so once installed it should be uninstalled.
TLDR
Yes all of them

deathblade said:
Ok so here is the breakdown:
Zygisk is not a module, but an implementation method used by modules. Magiskhide props is used to change the device fingerprint to a valid one that registers as protected by google play. Shamiko is for hiding root from Google play services, and Gpay (and whatever other apps may need it). Universal safteynet fix is used to help pass google safteynet checks (security). Not listed is the pixelify module used to add pixel exclusive features but of course with it install it cause havoc on Gpay and other apps so once installed it should be uninstalled.
TLDR
Yes all of them
Click to expand...
Click to collapse
Aite thanks for the help mate! just installed but apparently, i couldn't find gapps despite sideloading it.. might have to reinstall again

Hmm safetynet fix seems to fail, can't pass cts profile.. any step by step guides by any chance?
deathblade said:
Ok so here is the breakdown:
Zygisk is not a module, but an implementation method used by modules. Magiskhide props is used to change the device fingerprint to a valid one that registers as protected by google play. Shamiko is for hiding root from Google play services, and Gpay (and whatever other apps may need it). Universal safteynet fix is used to help pass google safteynet checks (security). Not listed is the pixelify module used to add pixel exclusive features but of course with it install it cause havoc on Gpay and other apps so once installed it should be uninstalled.
TLDR
Yes all of them
Click to expand...
Click to collapse

HW898 said:
Hmm safetynet fix seems to fail, can't pass cts profile.. any step by step guides by any chance?
Click to expand...
Click to collapse
That's where magisk hide props comes in. I don't have a full guide that I know of but I could do a quick wtite up tomorrow for you

deathblade said:
That's where magisk hide props comes in. I don't have a full guide that I know of but I could do a quick wtite up tomorrow for you
Click to expand...
Click to collapse
I got it working after following a guide~
Unfortunately features like now playing isn't working. the rest is pretty much okay tho

HW898 said:
I got it working after following a guide~
Unfortunately features like now playing isn't working. the rest is pretty much okay tho
Click to expand...
Click to collapse
You install the pixelify module? Also can you explain how it's not working?

deathblade said:
You install the pixelify module? Also can you explain how it's not working?
Click to expand...
Click to collapse
Nope, I didn't. Other than the modules to hide from banking apps as mentioned above, I installed a pixel launch module here to make it for pixel-like: https://forum.xda-developers.com/t/app-mod-pixel-launcher.4442077/
Other than that nothing else.
It doesn't;t work in the sense that it does not pick up music, even popular ones. The settings are there though, I can see them. It just doesn't identify any songs

HW898 said:
Nope, I didn't. Other than the modules to hide from banking apps as mentioned above, I installed a pixel launch module here to make it for pixel-like: https://forum.xda-developers.com/t/app-mod-pixel-launcher.4442077/
Other than that nothing else.
It doesn't;t work in the sense that it does not pick up music, even popular ones. The settings are there though, I can see them. It just doesn't identify any songs
Click to expand...
Click to collapse
This is the pixelify module I installed then removed, you can give it a try.
GitHub - Kingsman44/Pixelify: Magisk module to enables pixel exclusive features and ui
Magisk module to enables pixel exclusive features and ui - GitHub - Kingsman44/Pixelify: Magisk module to enables pixel exclusive features and ui
github.com

How To Guide Rooted, passing SafetyNet, Play Integrity, and GPay/Wallet contactless on A13 stable

I installed Android 13 yesterday and had some trouble getting GPay/Wallet contactless payments working. Here's what eventually worked for me:
Magisk 25.2 (Github, XDA)
Hide Magisk app
Enable Zygisk
Enforce DenyList
Add the usual suspects to DenyList (Google Play Store, Google Services Framework, Google Play Protect Service, Wallet/GPay app)
Install @Displax Universal SafetyNet Fix Mod as a Magisk module (kdrag0n's unmodded original did not work for me)
Clear storage/cache from GPay/Wallet, Play Store, and Play Services
Reboot
And that's it. No messing around with hiding props configs or anything like that.
I used a couple of apps to check my Safetynet/Play Integrity status: YASNAC (Github, Play Store) and Integrity Checker by @1nikolas (Play Store). On YASNAC, you need to pass Basic integrity and CTS profile match. On Integrity Checker, you need MEETS_DEVICE_INTEGRITY (which I didn't have with the standard Universal Safetynet Fix; I needed Displax's mod) and MEETS_BASIC_INTEGRITY. I don't have MEETS_STRONG_INTEGRITY; it's my understanding that you can't get that with root/unlocked bootloader at the moment. However, it appears you can get contactless payments working without it.
I hope having all this information together helps others, as I had a bit of trouble hunting it down.

Bringing from the kernel thread so we keep the off-topic to a minimum there.
triggerhappy_ said:
Reinstalling SafetyNet Fix 2.3.1 in Magisk Modules seems to be working fine.
Spoiler: YASNAC CTS profile check
View attachment 5687621
But still I haven't DEVICE_INTEGRITY in Play Integrity API checker. upd. after cleaning cache, now it doesn't have even BASIC.
Spoiler: API checker
View attachment 5687635
The app is probably corrupted, others are just doing fine. Anyway.
Spoiler: SafetyNet checker
View attachment 5687649
Click to expand...
Click to collapse
The newer Mod version of 2.3.1 Universal Safety Net fix referenced in the OP fixed the device integrity for me just now. I uninstalled the original fix (didn't reboot yet), then installed the new fix, rebooted, and I got device integrity passed.

direwolf1 said:
Add the usual suspects to DenyList (Google Play Store, Google Services Framework, Google Play Protect Service, Wallet/GPay app)
Click to expand...
Click to collapse
You don`t need to add all this stuff to DenyList when using USNF.

Weird that some don't work and others do *typical of Google though I guess lmao*. I've been using mine fine since the moment I first flashed it without any of above hassle. The Wallet might be bank related but integrity I dunno what would be the difference

This worked for me. I followed the same procedure in the exact order and experienced the same thing all the way through. Thanks very much for taking the time to make this post, I was absolutely dreading this and you made it easy for me!

Displax said:
You don`t need to add all this stuff to DenyList when using USNF.
Click to expand...
Click to collapse
Thanks! Appreciate the tip and the great work on the mod!

You can also install Shamiko for banking apps that need to be hidden. Mark but disable the deny list.

For those that have done this, is all DRM related stuff working with Widevine L1, etc (Netflix, Hulu, Peacock, etc)...

I can confirm for Hulu, works perfectly well with Displax's mod of USNF 2.3.1 and Shamiko.

Is it weird I'm still passing Integrity and Safetynet after the Android 13 update with the original kdrag0n module? Or is this one of those slow rollout things that will eventually affect me?

Thanks for this! Did the exact steps as the OP and everything works perfectly!

HereticBG said:
Is it weird I'm still passing Integrity and Safetynet after the Android 13 update with the original kdrag0n module? Or is this one of those slow rollout things that will eventually affect me?
Click to expand...
Click to collapse
Until I used the SafetyNet v1.31 MOD version, I only passed basic integrity in the Integrity Checker app. After I installed the MOD version, I then passed Device Integrity as well.

direwolf1 said:
I installed Android 13 yesterday and had some trouble getting GPay/Wallet contactless payments working. Here's what eventually worked for me:
Magisk 25.2 (Github, XDA)
Hide Magisk app
Enable Zygisk
Enforce DenyList
Add the usual suspects to DenyList (Google Play Store, Google Services Framework, Google Play Protect Service, Wallet/GPay app)
Install @Displax Universal SafetyNet Fix Mod as a Magisk module (kdrag0n's unmodded original did not work for me)
Clear storage/cache from GPay/Wallet, Play Store, and Play Services
Reboot
And that's it. No messing around with hiding props configs or anything like that.
I used a couple of apps to check my Safetynet/Play Integrity status: YASNAC (Github, Play Store) and Integrity Checker by @1nikolas (Play Store). On YASNAC, you need to pass Basic integrity and CTS profile match. On Integrity Checker, you need MEETS_DEVICE_INTEGRITY (which I didn't have with the standard Universal Safetynet Fix; I needed Displax's mod) and MEETS_BASIC_INTEGRITY. I don't have MEETS_STRONG_INTEGRITY; it's my understanding that you can't get that with root/unlocked bootloader at the moment. However, it appears you can get contactless payments working without it.
I hope having all this information together helps others, as I had a bit of trouble hunting it down.
Click to expand...
Click to collapse
Thanks so much for your detailed instructions.
Could you please be so kind as to check whether Xprivacylua works with your settings?
Looking forward to your comments

bush911 said:
Thanks so much for your detailed instructions.
Could you please be so kind as to check whether Xprivacylua works with your settings?
Looking forward to your comments
Click to expand...
Click to collapse
I don't use Xposed, so unfortunately I can't test that for you.

roirraW edor ehT said:
Until I used the SafetyNet v1.31 MOD version, I only passed basic integrity in the Integrity Checker app. After I installed the MOD version, I then passed Device Integrity as well.
Click to expand...
Click to collapse
That's what's weird, I pass both Basic and Device Integrity without the new MOD version, just using the old kdrag0n module. I guess it'll just hit me eventually lol

bush911 said:
Thanks so much for your detailed instructions.
Could you please be so kind as to check whether Xprivacylua works with your settings?
Looking forward to your comments
Click to expand...
Click to collapse
try to use shamiko if you use lspoed

LLStarks said:
You can also install Shamiko for banking apps that need to be hidden. Mark but disable the deny list.
Click to expand...
Click to collapse
also a blank whitelist file in /data/adb/shamiko will hide all rooted things from the system you can chack rooted status with MOMO app

Druboo666 said:
try to use shamiko if you use lspoed
Click to expand...
Click to collapse
Thank you for the input, I use Xpivacy mainly for hooking location as well other items, but shamiko is for hiding root?

bush911 said:
Thank you for the input, I use Xpivacy mainly for hooking location as well other items, but shamiko is for hiding root?
Click to expand...
Click to collapse
shamiko should hide both lspoed and root.not sure give it a try

It worked perfect on Pixel 6 with Android 12 thanks!