Develop Bugs

Anyone get V4A to work with Nougat and Magisk?

Hi y'all, first off I have the G920P, just recently upgraded to Nougat QC7 stock ROM, modified and running the SkyHigh kernel v5.01 with Magisk v12. Everything runs pretty smooth, even got Liveboot working successfully (there's a reason I mention Liveboot.) Now I decided to try to get Viper4Android to work. Of course, installing the standard apk fails when it comes to installing the driver. So I tried the V4A Magisk module and it installed fine, however on reboot, my Liveboot no longer works and when opening the V4A app it asks to install the driver, I hit yes and it says it successfully installed and to please reboot. I reboot and of course Liveboot still doesn't show, but otherwise it boots fine. Once I re-open the V4A app it is asking me to install the driver yet again, and the whole system at times seems a bit unstable until I disable the V4A module in Magisk Manager. Does anyone have any ideas, or has anyone gotten this to successfully work? If so I'd love a suggestion lol. I really would like to keep my Liveboot working, but I'd kinda like to get Viper working too. Thanks in advance for any help, suggestions, ideas, etc.
Chuck

I could not get the V4A module to install under Magisk 12; however, it works just fine with Magisk 13.
This is the version that I used: https://www.androidfilehost.com/?fid=745425885120735287
Magisk Uninstaller (should not be needed, but if you want it) is here: https://www.androidfilehost.com/?fid=745425885120735289
NOTE: You are, I believe using the @tdhite kernel, which is based in Magisk 12. Not sure what the impact of installing Magisk 13 will be.

The kernel is fine with Magisk v13 (beta, to be sure is all that is released there). Magisk v13 beta still has problems, so beware. The SkyHigh kernel and module are v13 compatible as much as v12, just so you know. The reason v12 is packaged in is v12 is the only stable Magisk version at this point.
The bigger issue is Magisk v13 beta working stably and reliably, but if you are willing to debug its failures, it's ok. There should be no need to uninstall to upgrade if you want to play. Reloading the kernel flash will cleanly load up v12 if all goes badly.
Sent from my iPad using Tapatalk

@koop1955 Thank you for that information! I will bookmark those so I can get back to them once v13 is reliable and stable enough for my kernel
@tdhite Thanks bud as Well! I think I will just stay where I am until the kernel and v13 play nicely. Just got this thing as perfect as I can for now, well other than ram use creeping up, but that's only every now and then, and for another topic. I *might* get my nandroid current and play a little if I get bored and want to tinker. I guess I can safely assume then the reason Liveboot stops working with the V4A module installed is because of Magisk v12...?
Thank you to both of you guys for the help and advice. At least now I know it's not some dumb issue with my device lol.
Chuck

@digitalchaos1980 and @tdhite, I have had a good experience with one particular version of Magisk 13, which is why I added it to my AFH. Other and newer versions...not so much. To be expected with a work in progress.
At some point, Magisk 13 will be final and we can move forward.

koop1955 said:
@digitalchaos1980 and @tdhite, I have had a good experience with one particular version of Magisk 13, which is why I added it to my AFH. Other and newer versions...not so much. To be expected with a work in progress.
At some point, Magisk 13 will be final and we can move forward.
Click to expand...
Click to collapse
No doubt! Version 13 gives me something to look forward to for sure
Chuck

digitalchaos1980 said:
Hi y'all, first off I have the G920P, just recently upgraded to Nougat QC7 stock ROM, modified and running the SkyHigh kernel v5.01 with Magisk v12. Everything runs pretty smooth, even got Liveboot working successfully (there's a reason I mention Liveboot.) Now I decided to try to get Viper4Android to work. Of course, installing the standard apk fails when it comes to installing the driver. So I tried the V4A Magisk module and it installed fine, however on reboot, my Liveboot no longer works and when opening the V4A app it asks to install the driver, I hit yes and it says it successfully installed and to please reboot. I reboot and of course Liveboot still doesn't show, but otherwise it boots fine. Once I re-open the V4A app it is asking me to install the driver yet again, and the whole system at times seems a bit unstable until I disable the V4A module in Magisk Manager. Does anyone have any ideas, or has anyone gotten this to successfully work? If so I'd love a suggestion lol. I really would like to keep my Liveboot working, but I'd kinda like to get Viper working too. Thanks in advance for any help, suggestions, ideas, etc.
Chuck
Click to expand...
Click to collapse
if you kindly Tell me the process how did you end up using Live boot in magisk , It would be very helpful . I have tried various method but failed

Saafir said:
Place a copy of audio effects.conf in vendor/etc. Should get you working. Be sure to set permissions as well.
Click to expand...
Click to collapse
Just to be sure, folks realize there is full equalizer support in my SkyHigh kernel and the bands are all adjustable, even per channel if desired, in Synapse, right? Just noting in case that's all you need, because it is a no-CPU-load way of getting it done.
Sent from my iPad using Tapatalk

Android System Update notice

Hello,
I have version D85130e installed on my phone and am rooted on the stock ROM. I received a System update notice this morning so i thought there was a new software version for the phone, but when I check on the T-mobile site for the LG G3, it says that D85130e is the latest version. (Cant post links because I am a new user).
I am confused, has anyone else received this update? I couldn't find anything about it. It is 133.0MB in size and says that it 'includes Android Security updates among other changes'.
I don't want to install it in case in breaks my root or worse. Does anyone here have any information about this?
Thank you!

received the update too
seleucid said:
Hello,
I have version D85130e installed on my phone and am rooted on the stock ROM. I received a System update notice this morning so i thought there was a new software version for the phone, but when I check on the T-mobile site for the LG G3, it says that D85130e is the latest version. (Cant post links because I am a new user).
I am confused, has anyone else received this update? I couldn't find anything about it. It is 133.0MB in size and says that it 'includes Android Security updates among other changes'.
I don't want to install it in case in breaks my root or worse. Does anyone here have any information about this?
Thank you!
Click to expand...
Click to collapse
tho i was disappointed it wasn't a 7.0 update, but i'm installing it right now and i would love to know: what's new?

Its a April security update. I will make a flashable zip with it. If anyone wants to try it pm me and I will share the link when its uploaded.
Link to try it: https://forum.xda-developers.com/showpost.php?p=72931940&postcount=98 Flash MagiskSU after flashing the zip.

from what I read yesterday, it's the D85130G update. https://goo.gl/ktuJMP
I don't want to chance unrooting my phone with this update. I'll wait till there is a rooted version to flash

jdmst77 said:
from what I read yesterday, it's the D85130G update.
I don't want to chance unrooting my phone with this update. I'll wait till there is a rooted version to flash
Click to expand...
Click to collapse
You can flash the update from the zip above and then flash magisk. That worked for me, I have v30G and root access. Thanks to MESA for suggesting it.
edit: MESA already said this above.

Stable update by MESA. No need to think about losing root access as MAGISK does the trick perfectly.
Everything is stable so far after 2 days of usage. I'll continue to give updates as and when I detect something unusual.

@eadumensah: is your safetynet working with MAGISK?

MESA said:
Its a April security update. I will make a flashable zip with it. If anyone wants to try it pm me and I will share the link when its uploaded.
Link to try it: https://forum.xda-developers.com/showpost.php?p=72931940&postcount=98 Flash MagiskSU after flashing the zip.
Click to expand...
Click to collapse
Thanks for keeping this old phone alive, it's running much better after the update. I just flashed it right over everything.

bluehacker007 said:
@eadumensah: is your safetynet working with MAGISK?
Click to expand...
Click to collapse
Not anymore. It worked on V12 but stopped after I upgraded to v13. Let me know in case you get a solution to that.

bluehacker007 said:
@eadumensah: is your safetynet working with MAGISK?
Click to expand...
Click to collapse
Ignore my earlier update. It does now after upgrading to v13.2

eadumensah said:
Ignore my earlier update. It does now after upgrading to v13.2
Click to expand...
Click to collapse
After a lot of testing it seems to me that safetynet works fine until I install xposed. Furthermore, installing systemless xposed from the magisk repository results in failure to boot. If I install systemless xposed from the xposed materialdesign app I am able to boot and use xposed modules but my safetynet check fails. I'm using magisk v13.2, magisk manager v5.0.6, material xposed installer v3.0.1 and systemless xposed v87.0 sdk 23 by topjohnwu.
Edited to add versions.

bluehacker007 said:
After a lot of testing it seems to me that safetynet works fine until I install xposed. Furthermore, installing systemless xposed from the magisk repository results in failure to boot. If I install systemless xposed from the xposed materialdesign app I am able to boot and use xposed modules but my safetynet check fails. I'm using magisk v13.2, magisk manager v5.0.6, material xposed installer v3.0.1 and systemless xposed v87.0 sdk 23 by topjohnwu.
Edited to add versions.
Click to expand...
Click to collapse
I got rid of xposed and deleted the play store data. Got into the magisk hide option and checked the following
1. Google play store
2. Google services framework
This is to hide it from detection by google. You can try it without deleting xposed first and let's see the outcome.

eadumensah said:
I got rid of xposed and deleted the play store data. Got into the magisk hide option and checked the following
1. Google play store
2. Google services framework
This is to hide it from detection by google. You can try it without deleting xposed first and let's see the outcome.
Click to expand...
Click to collapse
Tried that but it did not work. If I enable magisk core only mode (which disables systemless xposed) then I can pass security check. The only other magisk module I have is unified hosts adblock and I very much doubt that that is causing the safetynet failure.
Interesting side note: I've deleted apps from /system/apps and /system/priv-app from TWRP and I've changed the DPI using texdroider and these changes don't seem to trip safetynet.

lg g3 d851 30e MM not rooted
please help
i have an lg g3 d851 30e MM not rooted
i want to root(magisk systemless root) my lg g3 instal twrp and get the firmware v30G !!!!
what should i do
---------- Post added at 11:20 PM ---------- Previous post was at 10:43 PM ----------
MESA said:
Its a April security update. I will make a flashable zip with it. If anyone wants to try it pm me and I will share the link when its uploaded.
Link to try it: https://forum.xda-developers.com/showpost.php?p=72931940&postcount=98 Flash MagiskSU after flashing the zip.
Click to expand...
Click to collapse
lg g3 d851 30e MM not rooted
please help
i have an lg g3 d851 30e MM not rooted
i want to root(magisk systemless root) my lg g3 instal twrp and get the firmware v30G !!!!
what should i do

bluehacker007 said:
After a lot of testing it seems to me that safetynet works fine until I install xposed. Furthermore, installing systemless xposed from the magisk repository results in failure to boot. If I install systemless xposed from the xposed materialdesign app I am able to boot and use xposed modules but my safetynet check fails. I'm using magisk v13.2, magisk manager v5.0.6, material xposed installer v3.0.1 and systemless xposed v87.0 sdk 23 by topjohnwu.
Edited to add versions.
Click to expand...
Click to collapse
so you were able to get xposed to install and work correctly on 30G? Please confirm
whenever I tried, I could never boot up the device. If failing safetynet means that i can have xposed on 30G, I'm ready to upgrade from 30E

jdmst77 said:
so you were able to get xposed to install and work correctly on 30G? Please confirm
whenever I tried, I could never boot up the device. If failing safetynet means that i can have xposed on 30G, I'm ready to upgrade from 30E
Click to expand...
Click to collapse
I did get xposed to work but don't download and install the framework from the magisk app - use the xposed material design app to download and install the framework. I'm not sure why the magisk supplied framework doesn't work - it caused me to get stuck at boot as well.

bluehacker007 said:
I did get xposed to work but don't download and install the framework from the magisk app - use the xposed material design app to download and install the framework. I'm not sure why the magisk supplied framework doesn't work - it caused me to get stuck at boot as well.
Click to expand...
Click to collapse
I've been waiting for this info to upgrade. Thanks for all the details, including version, etc

Official xposed for Nougat released

Just a heads up for anyone that wasn't aware, this has been released now and appears to be working on my device - xXx 3.8 with stock kernel and magisk.
https://forum.xda-developers.com/showthread.php?t=3034811
Make sure you install the zip via recovery first, then install the xposed installer apk otherwise it doesn't function correctly!
Currently testing amplify but I think some other modules such as greenify need some updating to function correctly.
Hope it helps some of you, and please don't forget to share any tips you have :good:

Does xposed works fine with stock OxygenOs on op5?
Has anyone tested it??

[ROM][7.1.1] ExperienceOS R11.0 Lite + Addon Installer [OOS 4.5.12 Based][07.10.2017] by jamal2367
Flat Style Bar Indicator ver. 4.0.1
Works well.

jaswanth666 said:
Does xposed works fine with stock OxygenOs on op5?
Has anyone tested it??
Click to expand...
Click to collapse
I have just installed,it's all good so far

Can´t get it to work. Only ends up in reboot everytime I tries to open Magisk Manager, any mod or Xposed app....

works fine here, greenify module not working but no issues with xposed itself, booted fine!
boot took a while after flashing the sdk
amplify won't shoe any services or wakelocks, guess all the apps need to be updated by the devs
oos 4.5.11
xposed sdk25
arm64
magisk 14.0

Working OOS with SU. Boot takes a bit longer.

Gustav Karlsson said:
Can´t get it to work. Only ends up in reboot everytime I tries to open Magisk Manager, any mod or Xposed app....
Click to expand...
Click to collapse
Have you tried removing magisk completely, then reapply it ? I'm gonna try with Magisk 14.2 in a few but 14.0 is working great as of now.
Update : took me a few tries but I'm now on 4.5.12, Magisk 14.2 and Xposed. (Safety Net now failing but that was expected and if I am not mistaken unfixable at the moment )
If anyone needs it, I can post my steps though it's nothing fancy:laugh:

Eagle-no1 said:
[ROM][7.1.1] ExperienceOS R11.0 Lite + Addon Installer [OOS 4.5.12 Based][07.10.2017] by jamal2367
Flat Style Bar Indicator ver. 4.0.1
Works well.
Click to expand...
Click to collapse
How you got this bro?

ddaharu said:
How you got this bro?
Click to expand...
Click to collapse
https://play.google.com/store/apps/details?id=com.bocharov.xposed.fsbi&hl=it

ddaharu said:
How you got this bro?
Click to expand...
Click to collapse
Worth buying it, get a great program.

yeah amplify seems to work but greenify does not

liloow said:
Have you tried removing magisk completely, then reapply it ? I'm gonna try with Magisk 14.2 in a few but 14.0 is working great as of now.
Update : took me a few tries but I'm now on 4.5.12, Magisk 14.2 and Xposed. (Safety Net now failing but that was expected and if I am not mistaken unfixable at the moment )
If anyone needs it, I can post my steps though it's nothing fancy:laugh:
Click to expand...
Click to collapse
How did you get it work? I've 4.5.12 (Freedom OS 1.9), Magisk 14.0 . Apps only work for the first time. For example, when i install "Lockscreen Mod", after the first reboot, the app works, after the second reboot, it doesn't work. Anyone else got this problem? I've got Franco Kernel installed, is that a problem? What are the correct steps to install Xposed V88 Arm64 on the Oneplus 5? If i install Magisk 14.2, the phone doesn't boot anymore.

Eagle-no1 said:
[ROM][7.1.1] ExperienceOS R11.0 Lite + Addon Installer [OOS 4.5.12 Based][07.10.2017] by jamal2367
Flat Style Bar Indicator ver. 4.0.1
Works well.
Click to expand...
Click to collapse
Can you make the status bar a solid color with that app? I've been looking for something to make my status bar black at all times with no luck

Piplup702 said:
Can you make the status bar a solid color with that app? I've been looking for something to make my status bar black at all times with no luck
Click to expand...
Click to collapse
I have not tried because I like transparent myself

reawo said:
works fine here, greenify module not working but no issues with xposed itself, booted fine!
boot took a while after flashing the sdk
amplify won't shoe any services or wakelocks, guess all the apps need to be updated by the devs
oos 4.5.11
xposed sdk25
arm64
magisk 14.0
Click to expand...
Click to collapse
what's your experience one day later? Phone working fast? apps behaving right?
I'm a bit concerned in flashing it..

Flat Style Bar Indicator working fine on OOS?

Zosk said:
Flat Style Bar Indicator working fine on OOS?
Click to expand...
Click to collapse
Why did you not try it and report? :good:

I just installed the modified apk from topjohnwu and afterwards the sdk25 (v88) thru magisk 14.0
Framework successfully recognized, though I haven't installed any modules yet. Gonna wait a few days for most of them to be updated.
Boot took around 1 minute. Phone is super responsive and fast as usual (fastlane 35)
OOS 4.5.11
Blu_spark kernel

Hitman478™ said:
Why did you not try it and report? :good:
Click to expand...
Click to collapse
I'll explain to the child .
Because first I want to know the feedback from other users.

Question Viper for OnePlus 9 pro

Hello I got the OnePlus 9 pro as a birthday gift it's the unlocked version wanted to know if there is a guide on how to install viper on the plus9 pro I have the 7pro with viper and it's amazing

Root your phone (via Magisk)
Download the v4a.zip from the official thread
Install the .zip via the Magisk app (install as a module)
Reboot
et voila!

dxcim said:
Root your phone (via Magisk)
Download the v4a.zip from the official thread
Install the .zip via the Magisk app (install as a module)
Reboot
et voila!
Click to expand...
Click to collapse
Man I dumb on how is it

gokou46 said:
Man I dumb on how is it
Click to expand...
Click to collapse
you're talking about Viper4Android right? the audio eq thingie?

dxcim said:
you're talking about Viper4Android right? the audio eq thingie?
Click to expand...
Click to collapse
Yes viper I did not know it was that easy to install

I was thinking that you are talking about Viper rom. That's Awesome !

dxcim said:
Root your phone (via Magisk)
Download the v4a.zip from the official thread
Install the .zip via the Magisk app (install as a module)
Reboot
et voila!
Click to expand...
Click to collapse
That will not work, you just get a driver install infinite loop in V4A app. You need to install JamesDSP before V4A.
Check this thread for details, read all the posts on the 1st page
Viper4Android
Hi guys i used V4A on all of my 1+ devices. Started from the 1+1, 5, 7Pro and now i own the 9 Pro. The phone is rooted with a patched img, Magisk 24.3 installed, stock recovery. OOS Version is 11.12.10.10 Somehow i cant get V4A get to work...
forum.xda-developers.com

Arcide said:
That will not work, you just get a driver install infinite loop in V4A app. You need to install JamesDSP before V4A.
Check this thread for details, read all the posts on the 1st page
Viper4Android
Hi guys i used V4A on all of my 1+ devices. Started from the 1+1, 5, 7Pro and now i own the 9 Pro. The phone is rooted with a patched img, Magisk 24.3 installed, stock recovery. OOS Version is 11.12.10.10 Somehow i cant get V4A get to work...
forum.xda-developers.com
Click to expand...
Click to collapse
I guess the JDSP requirement is specific to the 9 Pro then. I just followed the steps I mentioned for my 8T and worked fine. I did get a processing issue (not related to driver installation), but I found a fix in the V4A thread. You can go through the official V4A thread here.

I'm using Dolby Atmos and I think it works fine for me

demonio666 said:
I'm using Dolby Atmos and I think it works fine for me
Click to expand...
Click to collapse
What does that have to do with V4A?

dxcim said:
I guess the JDSP requirement is specific to the 9 Pro then. I just followed the steps I mentioned for my 8T and worked fine. I did get a processing issue (not related to driver installation), but I found a fix in the V4A thread. You can go through the official V4A thread here.
Click to expand...
Click to collapse
Yeah it's specific here I guess. All these people, including me, had this issue. Even after managing to install V4A properly I'm still on JamesDSP, as V4A gives me issues with convolvers and profile loading.

Installing Magisk on Galaxy Tab S T700 Running LineageOS 17.1

I've searched XDA and tried all the suggestions, but I still can't get Magisk to open on my Tab S. It is rooted with Lineage 17.1. I downloaded Magisk V26.1, renamed it to a zip file and installed with TWRP. I uninstalled and installed 3 times and still no luck. I also cleared cache and storage. There is no hidden version of Magisk. Anything else I can try? Maybe an older version of Magisk? Should I try wiping Dalvik cache using TWRP and if so, before or after installing Magisk?
Thanks!
Tom

try magisk canary or magisk delta

lapsmith said:
I've searched XDA and tried all the suggestions, but I still can't get Magisk to open on my Tab S. It is rooted with Lineage 17.1.
Click to expand...
Click to collapse
As you say it's rooted already why do you need to install Magisk 26 again at all, the current version already is 26.2 btw.
Cheers
Toscha

toscha42 said:
As you say it's rooted already why do you need to install Magisk 26 again at all, the current version already is 26.2 btw.
Cheers
Toscha
Click to expand...
Click to collapse
Good question. I'm a noobie and thought that Magisk provided more features or capabilities. But maybe I've been wasting my time on something I don't need!

Fytdyh said:
try magisk canary or magisk delta
Click to expand...
Click to collapse
Thanks, but it looks like canary only supports 64 bit systems. What is the difference between delta and the official Magisk? And if my tablet is already rooted, do I even need Magisk?

You don't need the Magisk app any longer. But honestly, as long as it is rooted I simply wouldn't touch it anyway. Just leave as it is.
The newer Magisk version is rather suitable for Android 13 and younger. Doesn't need to bother you and for < A12.
Cheers
Toscha

toscha42 said:
You don't need the Magisk app any longer. But honestly, as long as it is rooted I simply wouldn't touch it anyway. Just leave as it is.
The newer Magisk version is rather suitable for Android 13 and younger. Doesn't need to bother for you and < A12.
Cheers
Toscha
Click to expand...
Click to collapse
Well, that's great to hear, I don't have to mess with it any longer. Thanks so much Toscha!
Tom

Now I remember why I was trying to install Magisk I can't install Netflix from the play store (message says will not run on my device). But I found some comments here (https://forum.xda-developers.com/t/...m-t705-sm-t800-sm-t800-sm-p600.4270943/page-6) who used Magisk to get it to run:
mp1967 said:
I installed magisk v23 via twrp (renamed apk to zip first),
rebooted, used magisk modules liboemcrypto disabler and magiskhide props config and rebooted, enabled magisk hide
installed netflix app via sideload and tick box in magisk to hide this app
went to netflix account to enable HD streaming for the device
Click to expand...
Click to collapse
I tried searching that thread for any more clues, but I can't get the "Search this thread" tool to work and didn't want to read 73 pages of posts. Anyway, do you know another way to get Netflix to work on LineageOS 17.1?

I've Netflix installed on my SM-T805 (LineageOS 18.1) without any Magisk modules. Runs fine.
Cheers
Toscha

Thanks again, Toscha. I wonder if it is because I only have LineageOS 17.1, the latest available for my T700. Do you remember if you downloaded it from apkmirror?

Actually I'm not sure. At least in the settings for Netflix app it says 'Installed from Play Store'. Not sure though whether it's the same for apps installed from APKmirror.
I did that a while just for test purpose. Not using Netflix actively on the tablet. And yes, it might have been from APKmirror.
Cheers
Toscha

I appreciate all your help, Toscha. I'll try some other versions....though I think the one I used should work on the T700 processor.
Much obliged!

Hey Toscha, just wanted to let you know I got it to work. I was using TWRP to install but all I needed to do was use APKmirror installer app! All is good now
Tom

Glad it worked finally!
Cheers
Toscha